diff options
| -rw-r--r-- | drivers/usb/input/hid-core.c | 153 | ||||
| -rw-r--r-- | drivers/usb/input/hid.h | 10 |
2 files changed, 142 insertions, 21 deletions
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index f187a719f17..6b8a51cad37 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -903,6 +903,99 @@ static int hid_input_report(int type, struct urb *urb, int interrupt, struct pt_ } /* + * Input submission and I/O error handler. + */ + +static void hid_io_error(struct hid_device *hid); + +/* Start up the input URB */ +static int hid_start_in(struct hid_device *hid) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&hid->inlock, flags); + if (hid->open > 0 && !test_bit(HID_SUSPENDED, &hid->iofl) && + !test_and_set_bit(HID_IN_RUNNING, &hid->iofl)) { + rc = usb_submit_urb(hid->urbin, GFP_ATOMIC); + if (rc != 0) + clear_bit(HID_IN_RUNNING, &hid->iofl); + } + spin_unlock_irqrestore(&hid->inlock, flags); + return rc; +} + +/* I/O retry timer routine */ +static void hid_retry_timeout(unsigned long _hid) +{ + struct hid_device *hid = (struct hid_device *) _hid; + + dev_dbg(&hid->intf->dev, "retrying intr urb\n"); + if (hid_start_in(hid)) + hid_io_error(hid); +} + +/* Workqueue routine to reset the device */ +static void hid_reset(void *_hid) +{ + struct hid_device *hid = (struct hid_device *) _hid; + int rc_lock, rc; + + dev_dbg(&hid->intf->dev, "resetting device\n"); + rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); + if (rc_lock >= 0) { + rc = usb_reset_device(hid->dev); + if (rc_lock) + usb_unlock_device(hid->dev); + } + clear_bit(HID_RESET_PENDING, &hid->iofl); + + if (rc == 0) { + hid->retry_delay = 0; + if (hid_start_in(hid)) + hid_io_error(hid); + } else if (!(rc == -ENODEV || rc == -EHOSTUNREACH || rc == -EINTR)) + err("can't reset device, %s-%s/input%d, status %d", + hid->dev->bus->bus_name, + hid->dev->devpath, + hid->ifnum, rc); +} + +/* Main I/O error handler */ +static void hid_io_error(struct hid_device *hid) +{ + unsigned long flags; + + spin_lock_irqsave(&hid->inlock, flags); + + /* Stop when disconnected */ + if (usb_get_intfdata(hid->intf) == NULL) + goto done; + + /* When an error occurs, retry at increasing intervals */ + if (hid->retry_delay == 0) { + hid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */ + hid->stop_retry = jiffies + msecs_to_jiffies(1000); + } else if (hid->retry_delay < 100) + hid->retry_delay *= 2; + + if (time_after(jiffies, hid->stop_retry)) { + + /* Retries failed, so do a port reset */ + if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) { + if (schedule_work(&hid->reset_work)) + goto done; + clear_bit(HID_RESET_PENDING, &hid->iofl); + } + } + + mod_timer(&hid->io_retry, + jiffies + msecs_to_jiffies(hid->retry_delay)); +done: + spin_unlock_irqrestore(&hid->inlock, flags); +} + +/* * Input interrupt completion handler. */ @@ -913,25 +1006,35 @@ static void hid_irq_in(struct urb *urb, struct pt_regs *regs) switch (urb->status) { case 0: /* success */ + hid->retry_delay = 0; hid_input_report(HID_INPUT_REPORT, urb, 1, regs); break; case -ECONNRESET: /* unlink */ case -ENOENT: - case -EPERM: case -ESHUTDOWN: /* unplug */ - case -EILSEQ: /* unplug timeout on uhci */ + clear_bit(HID_IN_RUNNING, &hid->iofl); return; + case -EILSEQ: /* protocol error or unplug */ + case -EPROTO: /* protocol error or unplug */ case -ETIMEDOUT: /* NAK */ - break; + clear_bit(HID_IN_RUNNING, &hid->iofl); + hid_io_error(hid); + return; default: /* error */ warn("input irq status %d received", urb->status); } status = usb_submit_urb(urb, SLAB_ATOMIC); - if (status) - err("can't resubmit intr, %s-%s/input%d, status %d", - hid->dev->bus->bus_name, hid->dev->devpath, - hid->ifnum, status); + if (status) { + clear_bit(HID_IN_RUNNING, &hid->iofl); + if (status != -EPERM) { + err("can't resubmit intr, %s-%s/input%d, status %d", + hid->dev->bus->bus_name, + hid->dev->devpath, + hid->ifnum, status); + hid_io_error(hid); + } + } } /* @@ -1093,8 +1196,9 @@ static void hid_irq_out(struct urb *urb, struct pt_regs *regs) case 0: /* success */ break; case -ESHUTDOWN: /* unplug */ - case -EILSEQ: /* unplug timeout on uhci */ unplug = 1; + case -EILSEQ: /* protocol error or unplug */ + case -EPROTO: /* protocol error or unplug */ case -ECONNRESET: /* unlink */ case -ENOENT: break; @@ -1141,8 +1245,9 @@ static void hid_ctrl(struct urb *urb, struct pt_regs *regs) hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0, regs); break; case -ESHUTDOWN: /* unplug */ - case -EILSEQ: /* unplug timectrl on uhci */ unplug = 1; + case -EILSEQ: /* protocol error or unplug */ + case -EPROTO: /* protocol error or unplug */ case -ECONNRESET: /* unlink */ case -ENOENT: case -EPIPE: /* report not available */ @@ -1255,14 +1360,9 @@ static int hid_get_class_descriptor(struct usb_device *dev, int ifnum, int hid_open(struct hid_device *hid) { - if (hid->open++) - return 0; - - hid->urbin->dev = hid->dev; - - if (usb_submit_urb(hid->urbin, GFP_KERNEL)) - return -EIO; - + ++hid->open; + if (hid_start_in(hid)) + hid_io_error(hid); return 0; } @@ -1787,6 +1887,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) init_waitqueue_head(&hid->wait); + INIT_WORK(&hid->reset_work, hid_reset, hid); + setup_timer(&hid->io_retry, hid_retry_timeout, (unsigned long) hid); + + spin_lock_init(&hid->inlock); spin_lock_init(&hid->outlock); spin_lock_init(&hid->ctrllock); @@ -1855,11 +1959,16 @@ static void hid_disconnect(struct usb_interface *intf) if (!hid) return; + spin_lock_irq(&hid->inlock); /* Sync with error handler */ usb_set_intfdata(intf, NULL); + spin_unlock_irq(&hid->inlock); usb_kill_urb(hid->urbin); usb_kill_urb(hid->urbout); usb_kill_urb(hid->urbctrl); + del_timer_sync(&hid->io_retry); + flush_scheduled_work(); + if (hid->claimed & HID_CLAIMED_INPUT) hidinput_disconnect(hid); if (hid->claimed & HID_CLAIMED_HIDDEV) @@ -1934,6 +2043,10 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) { struct hid_device *hid = usb_get_intfdata (intf); + spin_lock_irq(&hid->inlock); /* Sync with error handler */ + set_bit(HID_SUSPENDED, &hid->iofl); + spin_unlock_irq(&hid->inlock); + del_timer(&hid->io_retry); usb_kill_urb(hid->urbin); dev_dbg(&intf->dev, "suspend\n"); return 0; @@ -1944,10 +2057,8 @@ static int hid_resume(struct usb_interface *intf) struct hid_device *hid = usb_get_intfdata (intf); int status; - if (hid->open) - status = usb_submit_urb(hid->urbin, GFP_NOIO); - else - status = 0; + clear_bit(HID_SUSPENDED, &hid->iofl); + status = hid_start_in(hid); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index 8b0d4346ce9..4e1b784fe52 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -31,6 +31,8 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/list.h> +#include <linux/timer.h> +#include <linux/workqueue.h> /* * USB HID (Human Interface Device) interface class code @@ -370,6 +372,9 @@ struct hid_control_fifo { #define HID_CTRL_RUNNING 1 #define HID_OUT_RUNNING 2 +#define HID_IN_RUNNING 3 +#define HID_RESET_PENDING 4 +#define HID_SUSPENDED 5 struct hid_input { struct list_head list; @@ -393,12 +398,17 @@ struct hid_device { /* device report descriptor */ int ifnum; /* USB interface number */ unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ + struct timer_list io_retry; /* Retry timer */ + unsigned long stop_retry; /* Time to give up, in jiffies */ + unsigned int retry_delay; /* Delay length in ms */ + struct work_struct reset_work; /* Task context for resets */ unsigned int bufsize; /* URB buffer size */ struct urb *urbin; /* Input URB */ char *inbuf; /* Input buffer */ dma_addr_t inbuf_dma; /* Input buffer dma */ + spinlock_t inlock; /* Input fifo spinlock */ struct urb *urbctrl; /* Control URB */ struct usb_ctrlrequest *cr; /* Control request struct */ |