diff options
| -rw-r--r-- | drivers/ata/ata_piix.c | 113 | ||||
| -rw-r--r-- | include/linux/libata.h | 2 |
2 files changed, 113 insertions, 2 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d9fa329fd15..ad070861bb5 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -91,6 +91,7 @@ #include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "ata_piix" #define DRV_VERSION "2.11" @@ -140,6 +141,9 @@ enum { RV = -3, /* reserved */ PIIX_AHCI_DEVICE = 6, + + /* host->flags bits */ + PIIX_HOST_BROKEN_SUSPEND = (1 << 24), }; struct piix_map_db { @@ -159,6 +163,10 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); +#ifdef CONFIG_PM +static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int piix_pci_device_resume(struct pci_dev *pdev); +#endif static unsigned int in_module_init = 1; @@ -255,8 +263,8 @@ static struct pci_driver piix_pci_driver = { .probe = piix_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, + .suspend = piix_pci_device_suspend, + .resume = piix_pci_device_resume, #endif }; @@ -881,6 +889,107 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev) do_pata_set_dmamode(ap, adev, 1); } +#ifdef CONFIG_PM +static struct dmi_system_id piix_broken_suspend_dmi_table[] = { + { + .ident = "TECRA M5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"), + }, + }, + { + .ident = "Satellite U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"), + }, + }, + { + .ident = "Satellite U205", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"), + }, + }, + { + .ident = "Portege M500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"), + }, + }, + { } +}; + +static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + unsigned long flags; + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + /* Some braindamaged ACPI suspend implementations expect the + * controller to be awake on entry; otherwise, it burns cpu + * cycles and power trying to do something to the sleeping + * beauty. + */ + if (dmi_check_system(piix_broken_suspend_dmi_table) && + mesg.event == PM_EVENT_SUSPEND) { + pci_save_state(pdev); + + /* mark its power state as "unknown", since we don't + * know if e.g. the BIOS will change its device state + * when we suspend. + */ + if (pdev->current_state == PCI_D0) + pdev->current_state = PCI_UNKNOWN; + + /* tell resume that it's waking up from broken suspend */ + spin_lock_irqsave(&host->lock, flags); + host->flags |= PIIX_HOST_BROKEN_SUSPEND; + spin_unlock_irqrestore(&host->lock, flags); + } else + ata_pci_device_do_suspend(pdev, mesg); + + return 0; +} + +static int piix_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + unsigned long flags; + int rc; + + if (host->flags & PIIX_HOST_BROKEN_SUSPEND) { + spin_lock_irqsave(&host->lock, flags); + host->flags &= ~PIIX_HOST_BROKEN_SUSPEND; + spin_unlock_irqrestore(&host->lock, flags); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* PCI device wasn't disabled during suspend. Use + * __pci_reenable_device() to avoid affecting the + * enable count. + */ + rc = __pci_reenable_device(pdev); + if (rc) + dev_printk(KERN_ERR, &pdev->dev, "failed to enable " + "device after resume (%d)\n", rc); + } else + rc = ata_pci_device_do_resume(pdev); + + if (rc == 0) + ata_host_resume(host); + + return rc; +} +#endif + #define AHCI_PCI_BAR 5 #define AHCI_GLOBAL_CTL 0x04 #define AHCI_ENABLE (1 << 31) diff --git a/include/linux/libata.h b/include/linux/libata.h index 9aa6c10f7bb..41978a55731 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -216,6 +216,8 @@ enum { ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ + /* bits 24:31 of host->flags are reserved for LLD specific flags */ + /* various lengths of time */ ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ |