aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/scsi_error.c9
-rw-r--r--drivers/scsi/scsi_transport_fc.c37
-rw-r--r--include/scsi/scsi_host.h14
-rw-r--r--include/scsi/scsi_transport.h11
4 files changed, 51 insertions, 20 deletions
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 5cc97b72166..9cf02062213 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -29,6 +29,7 @@
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi_request.h>
@@ -163,16 +164,12 @@ void scsi_times_out(struct scsi_cmnd *scmd)
{
scsi_log_completion(scmd, TIMEOUT_ERROR);
- if (scmd->device->host->hostt->eh_timed_out)
- switch (scmd->device->host->hostt->eh_timed_out(scmd)) {
+ if (scmd->device->host->transportt->eh_timed_out)
+ switch (scmd->device->host->transportt->eh_timed_out(scmd)) {
case EH_HANDLED:
__scsi_done(scmd);
return;
case EH_RESET_TIMER:
- /* This allows a single retry even of a command
- * with allowed == 0 */
- if (scmd->retries++ > scmd->allowed)
- break;
scsi_add_timer(scmd, scmd->timeout_per_command,
scsi_times_out);
return;
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 56012b2694d..3c3baa9f5f2 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -31,6 +31,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_cmnd.h>
#include "scsi_priv.h"
/*
@@ -1090,6 +1091,40 @@ static int fc_rport_match(struct attribute_container *cont,
}
+/**
+ * fc_timed_out - FC Transport I/O timeout intercept handler
+ *
+ * @scmd: The SCSI command which timed out
+ *
+ * This routine protects against error handlers getting invoked while a
+ * rport is in a blocked state, typically due to a temporarily loss of
+ * connectivity. If the error handlers are allowed to proceed, requests
+ * to abort i/o, reset the target, etc will likely fail as there is no way
+ * to communicate with the device to perform the requested function. These
+ * failures may result in the midlayer taking the device offline, requiring
+ * manual intervention to restore operation.
+ *
+ * This routine, called whenever an i/o times out, validates the state of
+ * the underlying rport. If the rport is blocked, it returns
+ * EH_RESET_TIMER, which will continue to reschedule the timeout.
+ * Eventually, either the device will return, or devloss_tmo will fire,
+ * and when the timeout then fires, it will be handled normally.
+ * If the rport is not blocked, normal error handling continues.
+ *
+ * Notes:
+ * This routine assumes no locks are held on entry.
+ **/
+static enum scsi_eh_timer_return
+fc_timed_out(struct scsi_cmnd *scmd)
+{
+ struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device));
+
+ if (rport->port_state == FC_PORTSTATE_BLOCKED)
+ return EH_RESET_TIMER;
+
+ return EH_NOT_HANDLED;
+}
+
/*
* Must be called with shost->host_lock held
*/
@@ -1146,6 +1181,8 @@ fc_attach_transport(struct fc_function_template *ft)
/* Transport uses the shost workq for scsi scanning */
i->t.create_work_queue = 1;
+ i->t.eh_timed_out = fc_timed_out;
+
i->t.user_scan = fc_user_scan;
/*
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 827992949c4..a6cf3e535c0 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -147,20 +147,6 @@ struct scsi_host_template {
int (* eh_host_reset_handler)(struct scsi_cmnd *);
/*
- * This is an optional routine to notify the host that the scsi
- * timer just fired. The returns tell the timer routine what to
- * do about this:
- *
- * EH_HANDLED: I fixed the error, please complete the command
- * EH_RESET_TIMER: I need more time, reset the timer and
- * begin counting again
- * EH_NOT_HANDLED Begin normal error recovery
- *
- * Status: OPTIONAL
- */
- enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
-
- /*
* Before the mid layer attempts to scan for a new device where none
* currently exists, it will call this entry in your driver. Should
* your driver need to allocate any structs or perform any other init
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
index e7b1054adf8..b3657f11193 100644
--- a/include/scsi/scsi_transport.h
+++ b/include/scsi/scsi_transport.h
@@ -48,6 +48,17 @@ struct scsi_transport_template {
* True if the transport wants to use a host-based work-queue
*/
unsigned int create_work_queue : 1;
+
+ /*
+ * This is an optional routine that allows the transport to become
+ * involved when a scsi io timer fires. The return value tells the
+ * timer routine how to finish the io timeout handling:
+ * EH_HANDLED: I fixed the error, please complete the command
+ * EH_RESET_TIMER: I need more time, reset the timer and
+ * begin counting again
+ * EH_NOT_HANDLED Begin normal error recovery
+ */
+ enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
};
#define transport_class_to_shost(tc) \