aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-davinci/gpio.c133
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h73
3 files changed, 106 insertions, 101 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 70dba166890..ea3c858d753 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -515,6 +515,7 @@ config ARCH_DAVINCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
Support for TI's DaVinci platform.
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index c9cb4f09b18..3ebbacdd6db 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -1,7 +1,7 @@
/*
* TI DaVinci GPIO Support
*
- * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2006-2007 David Brownell
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -26,47 +26,45 @@
#include <asm/mach/irq.h>
-static DEFINE_SPINLOCK(gpio_lock);
-static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
-int gpio_request(unsigned gpio, const char *tag)
-{
- if (gpio >= DAVINCI_N_GPIO)
- return -EINVAL;
+static DEFINE_SPINLOCK(gpio_lock);
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+struct davinci_gpio {
+ struct gpio_chip chip;
+ struct gpio_controller *__iomem regs;
+};
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
+static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-void gpio_free(unsigned gpio)
-{
- if (gpio >= DAVINCI_N_GPIO)
- return;
-
- clear_bit(gpio, gpio_in_use);
-}
-EXPORT_SYMBOL(gpio_free);
/* create a non-inlined version */
-static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
+
+/*--------------------------------------------------------------------------*/
+
/*
- * Assuming the pin is muxed as a gpio output, set its output value.
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
*/
-void __gpio_set(unsigned gpio, int value)
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
+ u32 temp;
- __raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
-}
-EXPORT_SYMBOL(__gpio_set);
+ spin_lock(&gpio_lock);
+ temp = __raw_readl(&g->dir);
+ temp |= (1 << offset);
+ __raw_writel(temp, &g->dir);
+ spin_unlock(&gpio_lock);
+ return 0;
+}
/*
* Read the pin's value (works even if it's set up as output);
@@ -75,61 +73,72 @@ EXPORT_SYMBOL(__gpio_set);
* Note that changes are synched to the GPIO clock, so reading values back
* right after you've set them may give old values.
*/
-int __gpio_get(unsigned gpio)
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
- return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+ return (1 << offset) & __raw_readl(&g->in_data);
}
-EXPORT_SYMBOL(__gpio_get);
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-int gpio_direction_input(unsigned gpio)
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
u32 temp;
- u32 mask;
-
- if (!g)
- return -EINVAL;
+ u32 mask = 1 << offset;
spin_lock(&gpio_lock);
- mask = __gpio_mask(gpio);
temp = __raw_readl(&g->dir);
- temp |= mask;
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
__raw_writel(temp, &g->dir);
spin_unlock(&gpio_lock);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
- u32 temp;
- u32 mask;
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
- if (!g)
- return -EINVAL;
+ __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+ int i, base;
+
+ for (i = 0, base = 0;
+ i < ARRAY_SIZE(chips);
+ i++, base += 32) {
+ chips[i].chip.label = "DaVinci";
+
+ chips[i].chip.direction_input = davinci_direction_in;
+ chips[i].chip.get = davinci_gpio_get;
+ chips[i].chip.direction_output = davinci_direction_out;
+ chips[i].chip.set = davinci_gpio_set;
+
+ chips[i].chip.base = base;
+ chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ if (chips[i].chip.ngpio > 32)
+ chips[i].chip.ngpio = 32;
+
+ chips[i].regs = gpio2controller(base);
+
+ gpiochip_add(&chips[i].chip);
+ }
- spin_lock(&gpio_lock);
- mask = __gpio_mask(gpio);
- temp = __raw_readl(&g->dir);
- temp &= ~mask;
- __raw_writel(mask, value ? &g->set_data : &g->clr_data);
- __raw_writel(temp, &g->dir);
- spin_unlock(&gpio_lock);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
+pure_initcall(davinci_gpio_setup);
+/*--------------------------------------------------------------------------*/
/*
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ec151ccf1e8..b3a2961f0f4 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -14,6 +14,7 @@
#define __DAVINCI_GPIO_H
#include <linux/io.h>
+#include <asm-generic/gpio.h>
#include <mach/hardware.h>
/*
@@ -27,13 +28,16 @@
* need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
* used as gpios, not with other peripherals.
*
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code should write GPIO(N) or:
* - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
* - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
*
* For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
* for now, that's != GPIO(N)
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= 70 */
#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
@@ -67,11 +71,11 @@ __gpio_to_controller(unsigned gpio)
void *__iomem ptr;
if (gpio < 32)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
else if (gpio < 64)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
else if (gpio < DAVINCI_N_GPIO)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
else
ptr = NULL;
return ptr;
@@ -83,25 +87,17 @@ static inline u32 __gpio_mask(unsigned gpio)
}
/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging. Illegal constant parameters
- * cause link-time errors.
+ * parameters referencing built-in GPIOs, for low-overhead bitbanging.
*
- * Otherwise, calls with variable parameters use outlined functions.
+ * Otherwise, calls with variable parameters or referencing external
+ * GPIOs (e.g. on GPIO expander chips) use outlined functions.
*/
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
static inline void gpio_set_value(unsigned gpio, int value)
{
- if (__builtin_constant_p(value)) {
+ if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) {
struct gpio_controller *__iomem g;
u32 mask;
- if (gpio >= DAVINCI_N_GPIO)
- __error_inval_gpio();
-
g = __gpio_to_controller(gpio);
mask = __gpio_mask(gpio);
if (value)
@@ -111,48 +107,47 @@ static inline void gpio_set_value(unsigned gpio, int value)
return;
}
- __gpio_set(gpio, value);
+ __gpio_set_value(gpio, value);
}
/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
+ * as outputs, at least for built-in GPIOs.
*
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
+ * NOTE: for built-in GPIOs, changes in reported values are synchronized
+ * to the GPIO clock. This is easily seen after calling gpio_set_value()
+ * and then immediately gpio_get_value(), where the gpio_get_value() will
+ * return the old value until the GPIO clock ticks and the new value gets
+ * latched.
*/
-
static inline int gpio_get_value(unsigned gpio)
{
- struct gpio_controller *__iomem g;
-
- if (!__builtin_constant_p(gpio))
- return __gpio_get(gpio);
+ struct gpio_controller *__iomem g;
- if (gpio >= DAVINCI_N_GPIO)
- return __error_inval_gpio();
+ if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO)
+ return __gpio_get_value(gpio);
g = __gpio_to_controller(gpio);
- return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+ return __gpio_mask(gpio) & __raw_readl(&g->in_data);
}
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
+static inline int gpio_cansleep(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && gpio < DAVINCI_N_GPIO)
+ return 0;
+ else
+ return __gpio_cansleep(gpio);
+}
static inline int gpio_to_irq(unsigned gpio)
{
+ if (gpio >= DAVINCI_N_GPIO)
+ return -EINVAL;
return DAVINCI_N_AINTC_IRQ + gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
+ /* caller guarantees gpio_to_irq() succeeded */
return irq - DAVINCI_N_AINTC_IRQ;
}