aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--sound/pci/ac97/ac97_patch.c103
1 files changed, 99 insertions, 4 deletions
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 43455fc07b7..3eac0f86266 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3277,16 +3277,111 @@ static int patch_vt1616(struct snd_ac97 * ac97)
/*
* VT1617A codec
*/
-static int patch_vt1617a(struct snd_ac97 * ac97)
+
+/*
+ * unfortunately, the vt1617a stashes the twiddlers required for
+ * nooding the i/o jacks on 2 different regs. * thameans that we cant
+ * use the easy way provided by AC97_ENUM_DOUBLE() we have to write
+ * are own funcs.
+ *
+ * NB: this is absolutely and utterly different from the vt1618. dunno
+ * about the 1616.
+ */
+
+/* copied from ac97_surround_jack_mode_info() */
+static int snd_ac97_vt1617a_smart51_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
- /* bring analog power consumption to normal, like WinXP driver
- * for EPIA SP
+ /* ordering in this list reflects vt1617a docs for Reg 20 and
+ * 7a and Table 6 that lays out the matrix NB WRT Table6: SM51
+ * is SM51EN *AND* it's Bit14, not Bit15 so the table is very
+ * counter-intuitive */
+
+ static const char* texts[] = { "LineIn Mic1", "LineIn Mic1 Mic3",
+ "Surr LFE/C Mic3", "LineIn LFE/C Mic3",
+ "LineIn Mic2", "LineIn Mic2 Mic1",
+ "Surr LFE Mic1", "Surr LFE Mic1 Mic2"};
+ return ac97_enum_text_info(kcontrol, uinfo, texts, 8);
+}
+
+static int snd_ac97_vt1617a_smart51_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ushort usSM51, usMS;
+
+ struct snd_ac97 *pac97;
+
+ pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */
+
+ /* grab our desirec bits, then mash them together in a manner
+ * consistent with Table 6 on page 17 in the 1617a docs */
+
+ usSM51 = snd_ac97_read(pac97, 0x7a) >> 14;
+ usMS = snd_ac97_read(pac97, 0x20) >> 8;
+
+ ucontrol->value.enumerated.item[0] = (usSM51 << 1) + usMS;
+
+ return 0;
+}
+
+static int snd_ac97_vt1617a_smart51_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ushort usSM51, usMS, usReg;
+
+ struct snd_ac97 *pac97;
+
+ pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */
+
+ usSM51 = ucontrol->value.enumerated.item[0] >> 1;
+ usMS = ucontrol->value.enumerated.item[0] & 1;
+
+ /* push our values into the register - consider that things will be left
+ * in a funky state if the write fails */
+
+ usReg = snd_ac97_read(pac97, 0x7a);
+ snd_ac97_write_cache(pac97, 0x7a, (usReg & 0x3FFF) + (usSM51 << 14));
+ usReg = snd_ac97_read(pac97, 0x20);
+ snd_ac97_write_cache(pac97, 0x20, (usReg & 0xFEFF) + (usMS << 8));
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new snd_ac97_controls_vt1617a[] = {
+
+ AC97_SINGLE("Center/LFE Exchange", 0x5a, 8, 1, 0),
+ /*
+ * These are used to enable/disable surround sound on motherboards
+ * that have 3 bidirectional analog jacks
+ */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Smart 5.1 Select",
+ .info = snd_ac97_vt1617a_smart51_info,
+ .get = snd_ac97_vt1617a_smart51_get,
+ .put = snd_ac97_vt1617a_smart51_put,
+ },
+};
+
+int patch_vt1617a(struct snd_ac97 * ac97)
+{
+ int err = 0;
+
+ /* we choose to not fail out at this point, but we tell the
+ caller when we return */
+
+ err = patch_build_controls(ac97, &snd_ac97_controls_vt1617a[0],
+ ARRAY_SIZE(snd_ac97_controls_vt1617a));
+
+ /* bring analog power consumption to normal by turning off the
+ * headphone amplifier, like WinXP driver for EPIA SP
*/
snd_ac97_write_cache(ac97, 0x5c, 0x20);
ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
ac97->build_ops = &patch_vt1616_ops;
- return 0;
+
+ return err;
}
/*