aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore11
-rw-r--r--Documentation/DocBook/kgdb.tmpl20
-rw-r--r--Documentation/cpusets.txt2
-rw-r--r--Documentation/feature-removal-schedule.txt9
-rw-r--r--Documentation/filesystems/sysfs-pci.txt1
-rw-r--r--Documentation/hwmon/sysfs-interface33
-rw-r--r--Documentation/i2c/writing-clients18
-rw-r--r--Documentation/networking/ip-sysctl.txt12
-rw-r--r--Documentation/video4linux/CARDLIST.au08282
-rw-r--r--MAINTAINERS14
-rw-r--r--Makefile2
-rw-r--r--arch/alpha/Makefile1
-rw-r--r--arch/alpha/kernel/core_t2.c2
-rw-r--r--arch/alpha/kernel/pci.c17
-rw-r--r--arch/alpha/kernel/traps.c3
-rw-r--r--arch/arm/common/dmabounce.c3
-rw-r--r--arch/arm/mach-omap2/gpmc.c2
-rw-r--r--arch/arm/mach-realview/platsmp.c2
-rw-r--r--arch/arm/plat-omap/dma.c2
-rw-r--r--arch/blackfin/kernel/cplb-nompu/cplbinit.c6
-rw-r--r--arch/blackfin/kernel/irqchip.c5
-rw-r--r--arch/ia64/Makefile1
-rw-r--r--arch/ia64/kernel/iosapic.c2
-rw-r--r--arch/ia64/kernel/perfmon.c10
-rw-r--r--arch/ia64/kernel/sal.c7
-rw-r--r--arch/ia64/kernel/setup.c6
-rw-r--r--arch/ia64/kernel/time.c1
-rw-r--r--arch/ia64/sn/kernel/sn2/sn2_smp.c2
-rw-r--r--arch/ia64/uv/kernel/setup.c12
-rw-r--r--arch/mips/Makefile18
-rw-r--r--arch/mips/au1000/common/platform.c4
-rw-r--r--arch/mips/configs/sb1250-swarm_defconfig676
-rw-r--r--arch/mips/configs/tb0219_defconfig192
-rw-r--r--arch/mips/configs/tb0226_defconfig192
-rw-r--r--arch/mips/configs/tb0287_defconfig207
-rw-r--r--arch/mips/fw/arc/identify.c5
-rw-r--r--arch/mips/kernel/smp.c2
-rw-r--r--arch/mips/lasat/interrupt.c2
-rw-r--r--arch/mips/lasat/lasat_board.c13
-rw-r--r--arch/mips/lasat/sysctl.c172
-rw-r--r--arch/mips/lasat/sysctl.h24
-rw-r--r--arch/mips/mips-boards/generic/amon.c4
-rw-r--r--arch/mips/mips-boards/malta/Makefile3
-rw-r--r--arch/mips/mm/c-r4k.c33
-rw-r--r--arch/mips/mm/init.c1
-rw-r--r--arch/mips/mm/page.c2
-rw-r--r--arch/mips/nxp/pnx8550/jbs/board_setup.c11
-rw-r--r--arch/mips/nxp/pnx8550/stb810/board_setup.c10
-rw-r--r--arch/mips/pci/pci-sb1250.c8
-rw-r--r--arch/mips/pci/pci-vr41xx.c14
-rw-r--r--arch/mips/sibyte/swarm/Makefile4
-rw-r--r--arch/mn10300/kernel/process.c1
-rw-r--r--arch/mn10300/kernel/setup.c1
-rw-r--r--arch/powerpc/Makefile4
-rw-r--r--arch/powerpc/boot/Makefile5
-rw-r--r--arch/powerpc/boot/crtsavres.S233
-rw-r--r--arch/powerpc/boot/dts/mpc8377_rdb.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8378_rdb.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8379_rdb.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts4
-rw-r--r--arch/powerpc/configs/83xx/mpc8313_rdb_defconfig155
-rw-r--r--arch/powerpc/configs/83xx/mpc8315_rdb_defconfig162
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_mds_defconfig146
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_rdb_defconfig150
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itx_defconfig157
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig150
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_mds_defconfig146
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_mds_defconfig146
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_mds_defconfig146
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_rdb_defconfig224
-rw-r--r--arch/powerpc/configs/83xx/sbc834x_defconfig140
-rw-r--r--arch/powerpc/configs/85xx/ksi8560_defconfig168
-rw-r--r--arch/powerpc/configs/85xx/mpc8540_ads_defconfig133
-rw-r--r--arch/powerpc/configs/85xx/mpc8544_ds_defconfig210
-rw-r--r--arch/powerpc/configs/85xx/mpc8560_ads_defconfig135
-rw-r--r--arch/powerpc/configs/85xx/mpc8568mds_defconfig150
-rw-r--r--arch/powerpc/configs/85xx/mpc8572_ds_defconfig210
-rw-r--r--arch/powerpc/configs/85xx/mpc85xx_cds_defconfig137
-rw-r--r--arch/powerpc/configs/85xx/sbc8548_defconfig131
-rw-r--r--arch/powerpc/configs/85xx/sbc8560_defconfig135
-rw-r--r--arch/powerpc/configs/85xx/stx_gp3_defconfig152
-rw-r--r--arch/powerpc/configs/85xx/tqm8540_defconfig147
-rw-r--r--arch/powerpc/configs/85xx/tqm8541_defconfig146
-rw-r--r--arch/powerpc/configs/85xx/tqm8555_defconfig146
-rw-r--r--arch/powerpc/configs/85xx/tqm8560_defconfig146
-rw-r--r--arch/powerpc/configs/adder875_defconfig52
-rw-r--r--arch/powerpc/configs/ep8248e_defconfig124
-rw-r--r--arch/powerpc/configs/ep88xc_defconfig47
-rw-r--r--arch/powerpc/configs/g5_defconfig62
-rw-r--r--arch/powerpc/configs/linkstation_defconfig172
-rw-r--r--arch/powerpc/configs/mpc7448_hpc2_defconfig136
-rw-r--r--arch/powerpc/configs/mpc8272_ads_defconfig126
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig151
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig230
-rw-r--r--arch/powerpc/configs/mpc8610_hpcd_defconfig316
-rw-r--r--arch/powerpc/configs/mpc8641_hpcn_defconfig210
-rw-r--r--arch/powerpc/configs/mpc866_ads_defconfig128
-rw-r--r--arch/powerpc/configs/mpc885_ads_defconfig47
-rw-r--r--arch/powerpc/configs/ppc64_defconfig66
-rw-r--r--arch/powerpc/configs/pq2fads_defconfig133
-rw-r--r--arch/powerpc/configs/prpmc2800_defconfig153
-rw-r--r--arch/powerpc/configs/sbc8641d_defconfig150
-rw-r--r--arch/powerpc/configs/storcenter_defconfig71
-rw-r--r--arch/powerpc/kernel/head_44x.S7
-rw-r--r--arch/powerpc/kernel/irq.c2
-rw-r--r--arch/powerpc/kernel/legacy_serial.c5
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c2
-rw-r--r--arch/powerpc/kernel/prom_init_check.sh14
-rw-r--r--arch/powerpc/kernel/vdso.c2
-rw-r--r--arch/powerpc/lib/Makefile2
-rw-r--r--arch/powerpc/lib/crtsavres.S229
-rw-r--r--arch/powerpc/mm/hash_low_64.S4
-rw-r--r--arch/powerpc/platforms/52xx/lite5200_pm.c14
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c44
-rw-r--r--arch/powerpc/platforms/cell/spufs/run.c21
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c19
-rw-r--r--arch/powerpc/platforms/pseries/eeh_driver.c11
-rw-r--r--arch/powerpc/platforms/pseries/nvram.c4
-rw-r--r--arch/powerpc/xmon/xmon.c1
-rw-r--r--arch/x86/Kconfig9
-rw-r--r--arch/x86/kernel/Makefile1
-rw-r--r--arch/x86/kernel/geode_32.c5
-rw-r--r--arch/x86/kernel/i387.c4
-rw-r--r--arch/x86/kernel/kvmclock.c89
-rw-r--r--arch/x86/kernel/pci-dma.c14
-rw-r--r--arch/x86/kernel/process_32.c1
-rw-r--r--arch/x86/kernel/process_64.c1
-rw-r--r--arch/x86/kernel/pvclock.c141
-rw-r--r--arch/x86/kernel/setup_32.c10
-rw-r--r--arch/x86/kernel/smpboot.c1
-rw-r--r--arch/x86/kernel/tsc_32.c18
-rw-r--r--arch/x86/kvm/i8254.c9
-rw-r--r--arch/x86/kvm/lapic.c1
-rw-r--r--arch/x86/kvm/mmu.c19
-rw-r--r--arch/x86/kvm/vmx.c19
-rw-r--r--arch/x86/kvm/x86.c91
-rw-r--r--arch/x86/lib/copy_user_64.S25
-rw-r--r--arch/x86/lib/copy_user_nocache_64.S25
-rw-r--r--arch/x86/mm/init_64.c8
-rw-r--r--arch/x86/pci/common.c8
-rw-r--r--arch/x86/xen/Kconfig3
-rw-r--r--arch/x86/xen/enlighten.c56
-rw-r--r--arch/x86/xen/mmu.c75
-rw-r--r--arch/x86/xen/mmu.h24
-rw-r--r--arch/x86/xen/time.c132
-rw-r--r--arch/x86/xen/xen-head.S6
-rw-r--r--block/as-iosched.c2
-rw-r--r--drivers/acpi/ac.c8
-rw-r--r--drivers/acpi/bay.c3
-rw-r--r--drivers/acpi/dock.c3
-rw-r--r--drivers/acpi/glue.c3
-rw-r--r--drivers/acpi/video.c3
-rw-r--r--drivers/ata/Kconfig10
-rw-r--r--drivers/ata/ahci.c23
-rw-r--r--drivers/ata/ata_piix.c7
-rw-r--r--drivers/ata/libata-core.c4
-rw-r--r--drivers/ata/libata-scsi.c16
-rw-r--r--drivers/ata/libata.h2
-rw-r--r--drivers/ata/pata_pcmcia.c2
-rw-r--r--drivers/ata/sata_mv.c21
-rw-r--r--drivers/char/agp/agp.h6
-rw-r--r--drivers/char/agp/alpha-agp.c4
-rw-r--r--drivers/char/agp/amd-k7-agp.c4
-rw-r--r--drivers/char/agp/amd64-agp.c4
-rw-r--r--drivers/char/agp/ati-agp.c4
-rw-r--r--drivers/char/agp/backend.c16
-rw-r--r--drivers/char/agp/compat_ioctl.c2
-rw-r--r--drivers/char/agp/efficeon-agp.c6
-rw-r--r--drivers/char/agp/frontend.c12
-rw-r--r--drivers/char/agp/generic.c35
-rw-r--r--drivers/char/agp/hp-agp.c6
-rw-r--r--drivers/char/agp/i460-agp.c2
-rw-r--r--drivers/char/agp/intel-agp.c239
-rw-r--r--drivers/char/agp/nvidia-agp.c4
-rw-r--r--drivers/char/agp/parisc-agp.c6
-rw-r--r--drivers/char/agp/sgi-agp.c8
-rw-r--r--drivers/char/agp/sworks-agp.c6
-rw-r--r--drivers/char/agp/uninorth-agp.c10
-rw-r--r--drivers/char/agp/via-agp.c13
-rw-r--r--drivers/char/drm/ati_pcigart.c8
-rw-r--r--drivers/char/drm/drm.h2
-rw-r--r--drivers/char/drm/drm_drv.c7
-rw-r--r--drivers/char/drm/drm_pciids.h17
-rw-r--r--drivers/char/drm/i915_drv.c1
-rw-r--r--drivers/char/drm/i915_drv.h11
-rw-r--r--drivers/char/drm/i915_irq.c4
-rw-r--r--drivers/char/drm/r300_cmdbuf.c117
-rw-r--r--drivers/char/drm/r300_reg.h242
-rw-r--r--drivers/char/drm/radeon_cp.c1148
-rw-r--r--drivers/char/drm/radeon_drm.h8
-rw-r--r--drivers/char/drm/radeon_drv.h251
-rw-r--r--drivers/char/drm/radeon_irq.c2
-rw-r--r--drivers/char/drm/radeon_microcode.h1844
-rw-r--r--drivers/char/drm/radeon_state.c17
-rw-r--r--drivers/char/tty_io.c2
-rw-r--r--drivers/char/tty_ioctl.c7
-rw-r--r--drivers/firewire/Kconfig32
-rw-r--r--drivers/firewire/fw-cdev.c9
-rw-r--r--drivers/firewire/fw-ohci.c110
-rw-r--r--drivers/firewire/fw-sbp2.c3
-rw-r--r--drivers/firewire/fw-transaction.c52
-rw-r--r--drivers/hwmon/abituguru3.c18
-rw-r--r--drivers/hwmon/adt7473.c3
-rw-r--r--drivers/hwmon/lm75.c20
-rw-r--r--drivers/hwmon/lm85.c25
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c28
-rw-r--r--drivers/ide/arm/palm_bk3710.c22
-rw-r--r--drivers/ide/ide-generic.c9
-rw-r--r--drivers/ide/ide-proc.c2
-rw-r--r--drivers/ide/ide-taskfile.c6
-rw-r--r--drivers/ide/legacy/ide-cs.c44
-rw-r--r--drivers/ide/pci/opti621.c221
-rw-r--r--drivers/ide/ppc/pmac.c60
-rw-r--r--drivers/ieee1394/Kconfig118
-rw-r--r--drivers/infiniband/core/uverbs_main.c2
-rw-r--r--drivers/infiniband/hw/mthca/mthca_memfree.c6
-rw-r--r--drivers/infiniband/hw/nes/nes_verbs.c4
-rw-r--r--drivers/input/ff-core.c18
-rw-r--r--drivers/input/misc/Kconfig1
-rw-r--r--drivers/input/mouse/appletouch.c49
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h7
-rw-r--r--drivers/input/serio/i8042.c8
-rw-r--r--drivers/lguest/x86/core.c15
-rw-r--r--drivers/macintosh/mediabay.c7
-rw-r--r--drivers/macintosh/smu.c5
-rw-r--r--drivers/macintosh/therm_adt746x.c13
-rw-r--r--drivers/md/dm-crypt.c1
-rw-r--r--drivers/md/md.c6
-rw-r--r--drivers/md/raid10.c2
-rw-r--r--drivers/md/raid5.c7
-rw-r--r--drivers/media/common/ir-keymaps.c38
-rw-r--r--drivers/media/common/tuners/tda18271-common.c10
-rw-r--r--drivers/media/common/tuners/tda18271-fe.c53
-rw-r--r--drivers/media/common/tuners/xc5000.c30
-rw-r--r--drivers/media/common/tuners/xc5000_priv.h1
-rw-r--r--drivers/media/dvb/dvb-usb/gl861.c27
-rw-r--r--drivers/media/dvb/dvb-usb/umt-010.c2
-rw-r--r--drivers/media/dvb/frontends/au8522.c29
-rw-r--r--drivers/media/dvb/frontends/stv0299.c15
-rw-r--r--drivers/media/dvb/frontends/tda10023.c20
-rw-r--r--drivers/media/dvb/frontends/tda1004x.c29
-rw-r--r--drivers/media/dvb/ttpci/Kconfig1
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.c5
-rw-r--r--drivers/media/video/Kconfig8
-rw-r--r--drivers/media/video/Makefile2
-rw-r--r--drivers/media/video/au0828/au0828-cards.c18
-rw-r--r--drivers/media/video/cx18/Kconfig4
-rw-r--r--drivers/media/video/cx18/cx18-av-core.c73
-rw-r--r--drivers/media/video/cx18/cx18-av-core.h16
-rw-r--r--drivers/media/video/cx18/cx18-cards.c84
-rw-r--r--drivers/media/video/cx18/cx18-cards.h50
-rw-r--r--drivers/media/video/cx18/cx18-dvb.c17
-rw-r--r--drivers/media/video/cx18/cx18-gpio.c26
-rw-r--r--drivers/media/video/cx18/cx18-gpio.h1
-rw-r--r--drivers/media/video/cx18/cx18-i2c.c2
-rw-r--r--drivers/media/video/cx25840/cx25840-core.c2
-rw-r--r--drivers/media/video/cx88/cx88-alsa.c6
-rw-r--r--drivers/media/video/em28xx/em28xx-audio.c18
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c4
-rw-r--r--drivers/media/video/em28xx/em28xx-dvb.c10
-rw-r--r--drivers/media/video/em28xx/em28xx-reg.h1
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c24
-rw-r--r--drivers/media/video/pxa_camera.c4
-rw-r--r--drivers/media/video/saa7134/saa7134-alsa.c8
-rw-r--r--drivers/media/video/saa7134/saa7134-cards.c56
-rw-r--r--drivers/media/video/saa7134/saa7134-dvb.c43
-rw-r--r--drivers/media/video/saa7134/saa7134-empress.c37
-rw-r--r--drivers/media/video/saa7134/saa7134-input.c9
-rw-r--r--drivers/media/video/soc_camera.c16
-rw-r--r--drivers/media/video/uvc/Makefile3
-rw-r--r--drivers/media/video/uvc/uvc_ctrl.c1256
-rw-r--r--drivers/media/video/uvc/uvc_driver.c1955
-rw-r--r--drivers/media/video/uvc/uvc_isight.c134
-rw-r--r--drivers/media/video/uvc/uvc_queue.c477
-rw-r--r--drivers/media/video/uvc/uvc_status.c207
-rw-r--r--drivers/media/video/uvc/uvc_v4l2.c1105
-rw-r--r--drivers/media/video/uvc/uvc_video.c934
-rw-r--r--drivers/media/video/uvc/uvcvideo.h796
-rw-r--r--drivers/media/video/videodev.c245
-rw-r--r--drivers/media/video/vivi.c7
-rw-r--r--drivers/net/ehea/ehea.h8
-rw-r--r--drivers/net/ehea/ehea_main.c42
-rw-r--r--drivers/net/forcedeth.c15
-rw-r--r--drivers/net/fs_enet/mac-fcc.c3
-rw-r--r--drivers/net/ibm_newemac/core.c8
-rw-r--r--drivers/net/pasemi_mac.c2
-rw-r--r--drivers/net/wan/hdlc_fr.c1
-rw-r--r--drivers/net/wireless/hostap/hostap_80211_rx.c8
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c8
-rw-r--r--drivers/net/wireless/hostap/hostap_hw.c10
-rw-r--r--drivers/net/wireless/hostap/hostap_main.c5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-3945.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl4965-base.c3
-rw-r--r--drivers/net/wireless/libertas/if_usb.c1
-rw-r--r--drivers/pci/access.c14
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c17
-rw-r--r--drivers/pci/pci-driver.c2
-rw-r--r--drivers/pci/pci-sysfs.c89
-rw-r--r--drivers/pci/pci.h2
-rw-r--r--drivers/pci/quirks.c42
-rw-r--r--drivers/rtc/rtc-sa1100.c4
-rw-r--r--drivers/scsi/dpt/dptsig.h3
-rw-r--r--drivers/scsi/esp_scsi.c22
-rw-r--r--drivers/scsi/hosts.c9
-rw-r--r--drivers/scsi/ses.c2
-rw-r--r--drivers/scsi/sr.c3
-rw-r--r--drivers/serial/bfin_5xx.c40
-rw-r--r--drivers/thermal/Kconfig9
-rw-r--r--drivers/thermal/thermal_sys.c4
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/video/pxafb.c52
-rw-r--r--drivers/virtio/virtio.c2
-rw-r--r--drivers/watchdog/hpwdt.c182
-rw-r--r--drivers/xen/events.c2
-rw-r--r--fs/binfmt_elf.c3
-rw-r--r--fs/block_dev.c10
-rw-r--r--fs/buffer.c13
-rw-r--r--fs/dcache.c68
-rw-r--r--fs/exec.c8
-rw-r--r--fs/ext4/resize.c3
-rw-r--r--fs/fuse/inode.c4
-rw-r--r--fs/gfs2/bmap.c23
-rw-r--r--fs/gfs2/rgrp.c2
-rw-r--r--fs/locks.c6
-rw-r--r--fs/namei.c26
-rw-r--r--fs/nfs/mount_clnt.c5
-rw-r--r--fs/nfs/super.c76
-rw-r--r--fs/nfs/write.c7
-rw-r--r--fs/ocfs2/cluster/nodemanager.c74
-rw-r--r--fs/ocfs2/cluster/nodemanager.h4
-rw-r--r--fs/ocfs2/stack_o2cb.c41
-rw-r--r--fs/ocfs2/stack_user.c3
-rw-r--r--fs/ocfs2/stackglue.c119
-rw-r--r--fs/ocfs2/stackglue.h19
-rw-r--r--fs/pipe.c10
-rw-r--r--fs/select.c2
-rw-r--r--fs/udf/super.c57
-rw-r--r--fs/udf/udfdecl.h2
-rw-r--r--fs/utimes.c59
-rw-r--r--include/asm-alpha/core_mcpcia.h2
-rw-r--r--include/asm-alpha/core_t2.h14
-rw-r--r--include/asm-alpha/io.h6
-rw-r--r--include/asm-alpha/mmu_context.h6
-rw-r--r--include/asm-alpha/percpu.h74
-rw-r--r--include/asm-alpha/system.h10
-rw-r--r--include/asm-alpha/vga.h6
-rw-r--r--include/asm-blackfin/mach-bf527/bfin_serial_5xx.h2
-rw-r--r--include/asm-blackfin/mach-bf533/bfin_serial_5xx.h2
-rw-r--r--include/asm-blackfin/mach-bf537/bfin_serial_5xx.h2
-rw-r--r--include/asm-blackfin/mach-bf548/bfin_serial_5xx.h6
-rw-r--r--include/asm-blackfin/mach-bf561/bfin_serial_5xx.h2
-rw-r--r--include/asm-generic/Kbuild.asm2
-rw-r--r--include/asm-ia64/sn/simulator.h7
-rw-r--r--include/asm-mips/cpu-info.h4
-rw-r--r--include/asm-mips/gic.h4
-rw-r--r--include/asm-mips/lasat/serial.h4
-rw-r--r--include/asm-mips/mach-au1x00/au1000.h1
-rw-r--r--include/asm-mips/pgtable-bits.h2
-rw-r--r--include/asm-powerpc/Kbuild1
-rw-r--r--include/asm-powerpc/mediabay.h12
-rw-r--r--include/asm-powerpc/spu.h1
-rw-r--r--include/asm-powerpc/spu_csa.h2
-rw-r--r--include/asm-powerpc/system.h2
-rw-r--r--include/asm-x86/geode.h4
-rw-r--r--include/asm-x86/kvm_host.h4
-rw-r--r--include/asm-x86/kvm_para.h18
-rw-r--r--include/asm-x86/msr.h2
-rw-r--r--include/asm-x86/page_32.h3
-rw-r--r--include/asm-x86/pvclock-abi.h42
-rw-r--r--include/asm-x86/pvclock.h13
-rw-r--r--include/asm-x86/xen/page.h4
-rw-r--r--include/linux/Kbuild3
-rw-r--r--include/linux/a.out.h8
-rw-r--r--include/linux/agp_backend.h16
-rw-r--r--include/linux/agpgart.h4
-rw-r--r--include/linux/audit.h2
-rw-r--r--include/linux/bootmem.h2
-rw-r--r--include/linux/dcache.h2
-rw-r--r--include/linux/fs.h3
-rw-r--r--include/linux/i2c.h2
-rw-r--r--include/linux/input.h2
-rw-r--r--include/linux/kvm_host.h1
-rw-r--r--include/linux/pci.h1
-rw-r--r--include/linux/thermal.h6
-rw-r--r--include/linux/tty_driver.h5
-rw-r--r--include/media/cx25840.h6
-rw-r--r--include/media/ir-common.h1
-rw-r--r--include/media/v4l2-dev.h4
-rw-r--r--include/net/mac80211.h9
-rw-r--r--include/net/sch_generic.h2
-rw-r--r--include/xen/interface/xen.h7
-rw-r--r--kernel/audit.c6
-rw-r--r--kernel/auditfilter.c3
-rw-r--r--kernel/cpuset.c10
-rw-r--r--kernel/futex.c93
-rw-r--r--kernel/kgdb.c3
-rw-r--r--kernel/rcuclassic.c16
-rw-r--r--kernel/rcupreempt.c2
-rw-r--r--kernel/sched.c52
-rw-r--r--kernel/sched_rt.c66
-rw-r--r--kernel/sched_stats.h6
-rw-r--r--kernel/softlockup.c15
-rw-r--r--lib/debugobjects.c15
-rw-r--r--lib/ts_bm.c2
-rw-r--r--mm/bootmem.c6
-rw-r--r--mm/memory.c67
-rw-r--r--mm/migrate.c10
-rw-r--r--mm/slab.c5
-rw-r--r--net/bridge/br_if.c10
-rw-r--r--net/core/dev.c4
-rw-r--r--net/core/fib_rules.c4
-rw-r--r--net/core/filter.c1
-rw-r--r--net/ipv4/tcp.c4
-rw-r--r--net/mac80211/wext.c7
-rw-r--r--net/mac80211/wme.c3
-rw-r--r--net/netfilter/nf_conntrack_proto_tcp.c13
-rw-r--r--net/netlink/af_netlink.c2
-rw-r--r--net/sched/sch_api.c6
-rw-r--r--net/sched/sch_atm.c7
-rw-r--r--net/sched/sch_cbq.c8
-rw-r--r--net/sched/sch_dsmark.c2
-rw-r--r--net/sched/sch_hfsc.c6
-rw-r--r--net/sched/sch_htb.c4
-rw-r--r--net/sched/sch_ingress.c2
-rw-r--r--net/sched/sch_prio.c2
-rw-r--r--net/sched/sch_sfq.c2
-rw-r--r--sound/isa/sb/sb_mixer.c4
-rw-r--r--sound/pci/aw2/aw2-alsa.c4
-rw-r--r--sound/pci/oxygen/oxygen_mixer.c12
-rw-r--r--virt/kvm/ioapic.c31
433 files changed, 18211 insertions, 6458 deletions
diff --git a/.gitignore b/.gitignore
index d24ad506e79..869e1a3b64b 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,6 +3,10 @@
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
+# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# command after changing this file, to see if there are
+# any tracked files which get ignored after the change.
+#
# Normal rules
#
.*
@@ -18,18 +22,21 @@
*.lst
*.symtypes
*.order
+*.elf
+*.bin
+*.gz
#
# Top-level generic files
#
tags
TAGS
-vmlinux*
-!vmlinux.lds.S
+vmlinux
System.map
Module.markers
Module.symvers
!.gitignore
+!.mailmap
#
# Generated include files
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 028a8444d95..e8acd1f0345 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -84,10 +84,9 @@
runs an instance of gdb against the vmlinux file which contains
the symbols (not boot image such as bzImage, zImage, uImage...).
In gdb the developer specifies the connection parameters and
- connects to kgdb. Depending on which kgdb I/O modules exist in
- the kernel for a given architecture, it may be possible to debug
- the test machine's kernel with the development machine using a
- rs232 or ethernet connection.
+ connects to kgdb. The type of connection a developer makes with
+ gdb depends on the availability of kgdb I/O modules compiled as
+ builtin's or kernel modules in the test machine's kernel.
</para>
</chapter>
<chapter id="CompilingAKernel">
@@ -223,7 +222,7 @@
</para>
<para>
IMPORTANT NOTE: Using this option with kgdb over the console
- (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+ (kgdboc) is not supported.
</para>
</sect1>
</chapter>
@@ -249,18 +248,11 @@
(gdb) target remote /dev/ttyS0
</programlisting>
<para>
- Example (kgdb to a terminal server):
+ Example (kgdb to a terminal server on tcp port 2012):
</para>
<programlisting>
% gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
- </programlisting>
- <para>
- Example (kgdb over ethernet):
- </para>
- <programlisting>
- % gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
+ (gdb) target remote 192.168.2.2:2012
</programlisting>
<para>
Once connected, you can debug a kernel the way you would debug an
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index d803c5c68ab..353504de308 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request.
2 : search cores in a package.
3 : search cpus in a node [= system wide on non-NUMA system]
( 4 : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5 : search system wide [on NUMA system] )
This file is per-cpuset and affect the sched domain where the cpuset
belongs to. Therefore if the flag 'sched_load_balance' of a cpuset
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5378511a5f9..8319c462c9f 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -324,3 +324,12 @@ Why: A newer version of the options have been introduced in 2005 that
space app that directly uses the old options should convert to using
the new options.
Who: Vlad Yasevich <vladislav.yasevich@hp.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 5daa2aaec2c..68ef48839c0 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -36,6 +36,7 @@ files, each with their own function.
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
+ resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index f4a8ebc1ef1..2d845730d4e 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
------------------------------------------------
The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
Note that motherboards vary widely in the connections to sensor chips.
There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
will have to implement conversion, labeling and hiding of inputs. For
this reason, it is still not recommended to bypass the library.
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
Each chip gets its own directory in the sysfs /sys/devices tree. To
find all sensor chips, it is easier to follow the device symlinks from
/sys/class/hwmon/hwmon*.
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
All sysfs values are fixed point numbers.
There is only one value per file, unlike the older /proc specification.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index ee75cbace28..d4cd4126d1a 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you
provide. A client structure holds device-specific information like the
driver model device node, and its I2C address.
+/* iff driver uses driver model ("new style") binding model: */
+
+static struct i2c_device_id foo_idtable[] = {
+ { "foo", my_id_for_foo },
+ { "bar", my_id_for_bar },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, foo_idtable);
+
static struct i2c_driver foo_driver = {
.driver = {
.name = "foo",
},
/* iff driver uses driver model ("new style") binding model: */
+ .id_table = foo_ids,
.probe = foo_probe,
.remove = foo_remove,
@@ -173,10 +184,9 @@ handle may be used during foo_probe(). If foo_probe() reports success
(zero not a negative status code) it may save the handle and use it until
foo_remove() returns. That binding model is used by most Linux drivers.
-Drivers match devices when i2c_client.driver_name and the driver name are
-the same; this approach is used in several other busses that don't have
-device typing support in the hardware. The driver and module name should
-match, so hotplug/coldplug mechanisms will modprobe the driver.
+The probe function is called when an entry in the id_table name field
+matches the device's name. It is passed the entry that was matched so
+the driver knows which one in the table matched.
Device Creation (Standard driver model)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 72f6d52e52e..a40feaee62e 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER
Minimum time-to-live of entries. Should be enough to cover fragment
time-to-live on the reassembling side. This minimum time-to-live is
guaranteed if the pool size is less than inet_peer_threshold.
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_maxttl - INTEGER
Maximum time-to-live of entries. Unused entries will expire after
this period of time if there is no memory pressure on the pool (i.e.
when the number of entries in the pool is very small).
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_gc_mintime - INTEGER
Minimum interval between garbage collection passes. This interval is
in effect under high memory pressure on the pool.
- Measured in jiffies(1).
+ Measured in seconds.
inet_peer_gc_maxtime - INTEGER
Minimum interval between garbage collection passes. This interval is
in effect under low (or absent) memory pressure on the pool.
- Measured in jiffies(1).
+ Measured in seconds.
TCP variables:
@@ -795,10 +795,6 @@ tag - INTEGER
Allows you to write a number, which can be used as required.
Default value is 0.
-(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the
-Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact
-value on your system.
-
Alexey Kuznetsov.
kuznet@ms2.inr.ac.ru
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index aaae360312e..86d1c8e7b18 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -1,4 +1,4 @@
0 -> Unknown board (au0828)
- 1 -> Hauppauge HVR950Q (au0828) [2040:7200]
+ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ae19d502e0..9ba00869514 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4302,6 +4302,14 @@ L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
+USB VIDEO CLASS
+P: Laurent Pinchart
+M: laurent.pinchart@skynet.be
+L: linx-uvc-devel@berlios.de
+L: video4linux-list@redhat.com
+W: http://linux-uvc.berlios.de
+S: Maintained
+
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
@@ -4419,10 +4427,10 @@ M: johnpol@2ka.mipt.ru
S: Maintained
W83791D HARDWARE MONITORING DRIVER
-P: Charles Spirakis
-M: bezaur@gmail.com
+P: Marc Hulsman
+M: m.hulsman@tudelft.nl
L: lm-sensors@lm-sensors.org
-S: Odd Fixes
+S: Maintained
W83793 HARDWARE MONITORING DRIVER
P: Rudolf Marek
diff --git a/Makefile b/Makefile
index 6923d669a4f..6aff5f47c21 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
NAME = Rotary Wombat
# *DOCUMENTATION*
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 4e1a8e2c454..4759fe751aa 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -13,6 +13,7 @@ NM := $(NM) -B
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index c0750291b44..d9980d47ab8 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -74,6 +74,8 @@
# define DBG(args)
#endif
+DEFINE_SPINLOCK(t2_hae_lock);
+
static volatile unsigned int t2_mcheck_any_expected;
static volatile unsigned int t2_mcheck_last_taken;
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 36ab22a7ea1..5cf45fc5134 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
static void __init
quirk_cypress(struct pci_dev *dev)
{
+ /* The Notorious Cy82C693 chip. */
+
+ /* The generic legacy mode IDE fixup in drivers/pci/probe.c
+ doesn't work correctly with the Cypress IDE controller as
+ it has non-standard register layout. Fix that. */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+ dev->resource[2].start = dev->resource[3].start = 0;
+ dev->resource[2].end = dev->resource[3].end = 0;
+ dev->resource[2].flags = dev->resource[3].flags = 0;
+ if (PCI_FUNC(dev->devfn) == 2) {
+ dev->resource[0].start = 0x170;
+ dev->resource[0].end = 0x177;
+ dev->resource[1].start = 0x376;
+ dev->resource[1].end = 0x376;
+ }
+ }
+
/* The Cypress bridge responds on the PCI bus in the address range
0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
way to turn this off. The bridge also supports several extended
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index dc57790250d..c778779007f 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -447,7 +447,7 @@ struct unaligned_stat {
/* Macro for exception fixup code to access integer registers. */
-#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
asmlinkage void
@@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
{
long error, tmp1, tmp2, tmp3, tmp4;
unsigned long pc = regs->pc - 4;
+ unsigned long *_regs = regs->regs;
const struct exception_table_entry *fixup;
unaligned[0].count++;
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 52fc6a88328..2744673314b 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
EXPORT_SYMBOL(dma_sync_single_for_cpu);
EXPORT_SYMBOL(dma_sync_single_for_device);
-EXPORT_SYMBOL(dma_sync_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 02cede295e8..dbf68dc50ae 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -42,7 +42,7 @@
#define GPMC_STATUS 0x54
#define GPMC_PREFETCH_CONFIG1 0x1e0
#define GPMC_PREFETCH_CONFIG2 0x1e4
-#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_CONTROL 0x1ec
#define GPMC_PREFETCH_STATUS 0x1f0
#define GPMC_ECC_CONFIG 0x1f4
#define GPMC_ECC_CONTROL 0x1f8
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 3e57428affe..8e813ed5751 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
+ trace_hardirqs_off();
+
/*
* the primary core may have used a "cross call" soft interrupt
* to get this processor out of WFI in the BootMonitor - make
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c00eda588cd..39c637b0ffe 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch)
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
-
- dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
static void omap_disable_channel_irq(int lch)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 917325bfbd8..6be0c50122e 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -254,7 +254,8 @@ close_cplbtab(struct cplb_tab *table)
}
/* helper function */
-static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
@@ -291,7 +292,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en
}
}
-static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 73647c15877..07402f57c9d 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -60,9 +60,14 @@ static struct irq_chip bad_chip = {
};
static struct irq_desc bad_irq_desc = {
+ .status = IRQ_DISABLED,
.chip = &bad_chip,
.handle_irq = handle_bad_irq,
.depth = 1,
+ .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+#ifdef CONFIG_SMP
+ .affinity = CPU_MASK_ALL
+#endif
};
int show_interrupts(struct seq_file *p, void *v)
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 88f1a55c6c9..e67ee3f2769 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
core-$(CONFIG_KVM) += arch/ia64/kvm/
drivers-$(CONFIG_PCI) += arch/ia64/pci/
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 082c31dcfd9..39752cdef6f 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -558,8 +558,6 @@ static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void)
if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
NR_PREALLOCATE_RTE_ENTRIES);
- if (!rte)
- return NULL;
for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
list_add(&rte->rte_list, &free_rte_list);
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 71d05133f55..7714a97b010 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id)
* invoked after, it will find an empty queue and no
* signal will be sent. In both case, we are safe
*/
- if (filp->f_flags & FASYNC) {
- DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
- pfm_do_fasync (-1, filp, ctx, 0);
- }
-
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
@@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp)
return -EBADF;
}
+ if (filp->f_flags & FASYNC) {
+ DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+ pfm_do_fasync(-1, filp, ctx, 0);
+ }
+
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index 7e0259709c0..0464173ea56 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -252,11 +252,10 @@ check_sal_cache_flush (void)
local_irq_save(flags);
/*
- * Schedule a timer interrupt, wait until it's reported, and see if
- * SAL_CACHE_FLUSH drops it.
+ * Send ourselves a timer interrupt, wait until it's reported, and see
+ * if SAL_CACHE_FLUSH drops it.
*/
- ia64_set_itv(IA64_TIMER_VECTOR);
- ia64_set_itm(ia64_get_itc() + 1000);
+ platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
while (!ia64_get_irr(IA64_TIMER_VECTOR))
cpu_relax();
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index f48a809c686..632cda8f2e7 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -547,7 +547,8 @@ setup_arch (char **cmdline_p)
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
- 32 : cpus_weight(early_cpu_possible_map)), additional_cpus);
+ 32 : cpus_weight(early_cpu_possible_map)),
+ additional_cpus > 0 ? additional_cpus : 0);
# endif
#else
# ifdef CONFIG_SMP
@@ -578,8 +579,6 @@ setup_arch (char **cmdline_p)
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
- check_sal_cache_flush();
-
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
@@ -607,6 +606,7 @@ setup_arch (char **cmdline_p)
ia64_mca_init();
platform_setup(cmdline_p);
+ check_sal_cache_flush();
paging_init();
}
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8c73643f2d6..aad1b7b1fff 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -117,6 +117,7 @@ void account_system_vtime(struct task_struct *tsk)
local_irq_restore(flags);
}
+EXPORT_SYMBOL_GPL(account_system_vtime);
/*
* Called from the timer interrupt handler to charge accumulated user time
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 49d3120415e..e585f9a2afb 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si
int cpu;
char optstr[64];
+ if (count == 0 || count > sizeof(optstr))
+ return -EINVAL;
if (copy_from_user(optstr, user, count))
return -EFAULT;
optstr[count - 1] = '\0';
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
index 9aa743203c3..cf5f28ae96c 100644
--- a/arch/ia64/uv/kernel/setup.c
+++ b/arch/ia64/uv/kernel/setup.c
@@ -17,6 +17,9 @@
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
struct redir_addr {
unsigned long redirect;
@@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p)
m_n_config.s.m_skt = 37;
m_n_config.s.n_skt = 0;
mmr_base = 0;
+#if 0
+ /* Need BIOS calls - TDB */
+ if (!ia64_sn_is_fake_prom())
+ sn_prom_type = 1;
+ else
+#endif
+ sn_prom_type = 2;
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
} else {
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 69648d01acc..ad36c946ff9 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
-libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
@@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX) := 0xffffffff80001000
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM) += 0xffffffff80030000
+endif
all-$(CONFIG_SNI_RM) := vmlinux.ecoff
#
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 8cae7753ef7..74d6d4a593b 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = {
static struct resource au1xxx_mmc_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
- .end = SD0_PHYS_ADDR + 0x40,
+ .end = SD0_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SD1_PHYS_ADDR,
- .end = SD1_PHYS_ADDR + 0x40,
+ .end = SD1_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[2] = {
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 117470b60e3..4b879980278 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,67 +1,58 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:40 2007
+# Linux kernel version: 2.6.25
+# Sat May 3 00:38:11 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+CONFIG_SIBYTE_SWARM=y
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_SB1250=y
CONFIG_SIBYTE_SB1xxx_SOC=y
-CONFIG_CPU_SB1_PASS_1=y
+# CONFIG_CPU_SB1_PASS_1 is not set
# CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
+CONFIG_CPU_SB1_PASS_2_2=y
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
+CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y
# CONFIG_SIMULATION is not set
# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
# CONFIG_SB1_CERR_STALL is not set
@@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_SB1250=y
+CONFIG_CSRC_SB1250=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SB1_PASS_1_WORKAROUNDS=y
+CONFIG_SB1_PASS_2_WORKAROUNDS=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
@@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -166,38 +176,49 @@ CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_ZONE_DMA32=y
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
@@ -272,7 +297,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
@@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
@@ -296,7 +319,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -304,6 +326,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_RFKILL=m
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_SWARM=y
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
+# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m
# Character devices
#
# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# USB Gadget Support
+# Miscellaneous USB options
#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
#
-# MMC/SD Card support
+# USB Host Controller Drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
-# LED devices
+# USB Device Class drivers
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
-# LED drivers
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
-# LED Triggers
+# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# InfiniBand support
+# USB Imaging devices
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
#
-# Real Time Clock
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
@@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
@@ -853,9 +897,9 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -890,6 +933,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -897,45 +941,29 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_SB1XXX_CORELIS is not set
@@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
@@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
@@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index af82e1a1823..8dd3ae39bca 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 16:11:47 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:54:51 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
@@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
@@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -420,6 +443,10 @@ CONFIG_MII=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -427,7 +454,6 @@ CONFIG_NET_PCI=y
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -506,7 +536,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -533,7 +562,9 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_GPIO_TB0219=y
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -665,10 +710,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -694,17 +735,11 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -813,7 +828,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -828,24 +842,21 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -866,47 +877,38 @@ CONFIG_SUNRPC=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index a95385b2454..2ba240e897c 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 11:16:55 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:53:54 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -440,6 +461,10 @@ CONFIG_MII=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -447,7 +472,6 @@ CONFIG_NET_PCI=y
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -455,6 +479,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -470,6 +495,7 @@ CONFIG_E100=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -478,7 +504,6 @@ CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -505,7 +529,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -532,7 +555,9 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -818,7 +831,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -833,24 +845,21 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -871,47 +880,38 @@ CONFIG_SUNRPC=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 40d4a40a970..a5d0f3c55ed 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 14:03:54 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:55:55 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
@@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
@@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
@@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
@@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -429,7 +460,6 @@ CONFIG_ATA=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -458,7 +488,9 @@ CONFIG_ATA=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -532,6 +559,10 @@ CONFIG_MII=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -539,7 +570,6 @@ CONFIG_NET_PCI=y
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -649,7 +682,9 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@@ -719,9 +758,11 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
@@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
+# CONFIG_FB_COBALT is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -815,15 +865,18 @@ CONFIG_USB=m
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -868,10 +924,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -896,36 +948,14 @@ CONFIG_USB_MON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -987,7 +1013,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 28dfd2e2989..23066985a73 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -67,6 +67,11 @@ static struct smatch mach_table[] = {
.liname = "SNI RM200_PCI",
.type = MACH_SNI_RM200_PCI,
.flags = PROM_FLAG_DONT_FREE_TEMP,
+ }, {
+ .arcname = "RM200PCI-R5K",
+ .liname = "SNI RM200_PCI-R5K",
+ .type = MACH_SNI_RM200_PCI,
+ .flags = PROM_FLAG_DONT_FREE_TEMP,
}
};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 63370cdd3c9..cdf87a9dd4b 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry,
{
return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
}
+EXPORT_SYMBOL(smp_call_function);
void smp_call_function_interrupt(void)
{
@@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
put_cpu();
return 0;
}
+EXPORT_SYMBOL(smp_call_function_single);
static void stop_this_cpu(void *dummy)
{
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index cfeab669782..a56c1502696 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift;
void disable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
}
void enable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index ec2f658c370..31e328b3814 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -23,18 +23,19 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ctype.h>
+#include <linux/mutex.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include "at93c.h"
/* New model description table */
#include "lasat_models.h"
+static DEFINE_MUTEX(lasat_eeprom_mutex);
+
#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
struct lasat_info lasat_board_info;
-void update_bcastaddr(void);
-
int EEPROMRead(unsigned int pos, unsigned char *data, int len)
{
int i;
@@ -258,10 +259,6 @@ int lasat_init_board_info(void)
sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
}
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
- update_bcastaddr();
-#endif
-
return 0;
}
@@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void)
{
unsigned long crc;
+ mutex_lock(&lasat_eeprom_mutex);
+
/* Generate the CRC */
crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
sizeof(struct lasat_eeprom_struct) - 4);
@@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void)
/* Write the EEPROM info */
EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
sizeof(struct lasat_eeprom_struct));
+
+ mutex_unlock(&lasat_eeprom_mutex);
}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 389336c4ecc..866881ec0cf 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -29,15 +29,13 @@
#include <linux/string.h>
#include <linux/net.h>
#include <linux/inet.h>
-#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <asm/time.h>
-#include "sysctl.h"
+#ifdef CONFIG_DS1603
#include "ds1603.h"
-
-static DEFINE_MUTEX(lasat_info_mutex);
+#endif
/* Strategy function to write EEPROM after changing string entry */
int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
@@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_string(table, name,
nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
@@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dostring(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
@@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp,
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
+#ifdef CONFIG_DS1603
static int rtctmp;
-#ifdef CONFIG_DS1603
/* proc function to read/write RealTime Clock */
int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
if (!write) {
rtctmp = read_persistent_clock();
/* check for time < 0 and set to 0 */
@@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
rtctmp = 0;
}
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r)
return r;
- }
- rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
+
+ if (write)
+ rtc_mips_set_mmss(rtctmp);
return 0;
}
@@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
#ifdef CONFIG_DS1603
@@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
{
int r;
- mutex_lock(&lasat_info_mutex);
rtctmp = read_persistent_clock();
if (rtctmp < 0)
rtctmp = 0;
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
if (newval && newlen)
rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return r;
}
#endif
#ifdef CONFIG_INET
-static char lasat_bcastaddr[16];
-
-void update_bcastaddr(void)
-{
- unsigned int ip;
-
- ip = (lasat_board_info.li_eeprom_info.ipaddr &
- lasat_board_info.li_eeprom_info.netmask) |
- ~lasat_board_info.li_eeprom_info.netmask;
-
- sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
- (ip) & 0xff,
- (ip >> 8) & 0xff,
- (ip >> 16) & 0xff,
- (ip >> 24) & 0xff);
-}
-
-static char proc_lasat_ipbuf[32];
-
-/* Parsing of IP address */
int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
char *p, c;
int len;
+ char ipbuf[32];
if (!table->data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
@@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
return 0;
}
- mutex_lock(&lasat_info_mutex);
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
- if (get_user(c, p++)) {
- mutex_unlock(&lasat_info_mutex);
+ if (get_user(c, p++))
return -EFAULT;
- }
if (c == 0 || c == '\n')
break;
len++;
}
- if (len >= sizeof(proc_lasat_ipbuf)-1)
- len = sizeof(proc_lasat_ipbuf) - 1;
- if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (len >= sizeof(ipbuf)-1)
+ len = sizeof(ipbuf) - 1;
+ if (copy_from_user(ipbuf, buffer, len))
return -EFAULT;
- }
- proc_lasat_ipbuf[len] = 0;
+ ipbuf[len] = 0;
*ppos += *lenp;
/* Now see if we can convert it to a valid IP */
- ip = in_aton(proc_lasat_ipbuf);
+ ip = in_aton(ipbuf);
*(unsigned int *)(table->data) = ip;
lasat_write_eeprom_info();
} else {
ip = *(unsigned int *)(table->data);
- sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+ sprintf(ipbuf, "%d.%d.%d.%d",
(ip) & 0xff,
(ip >> 8) & 0xff,
(ip >> 16) & 0xff,
(ip >> 24) & 0xff);
- len = strlen(proc_lasat_ipbuf);
+ len = strlen(ipbuf);
if (len > *lenp)
len = *lenp;
if (len)
- if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (copy_to_user(buffer, ipbuf, len))
return -EFAULT;
- }
if (len < *lenp) {
- if (put_user('\n', ((char *) buffer) + len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (put_user('\n', ((char *) buffer) + len))
return -EFAULT;
- }
len++;
}
*lenp = len;
*ppos += len;
}
- update_bcastaddr();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
-#endif /* defined(CONFIG_INET) */
+#endif
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
-
if (newval && newlen) {
- if (name && *name == LASAT_PRID)
- lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-
+ lasat_board_info.li_eeprom_info.prid = *(int *)newval;
lasat_write_eeprom_info();
lasat_init_board_info();
}
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
-int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
+ if (write) {
+ lasat_board_info.li_eeprom_info.prid =
+ lasat_board_info.li_prid;
+ lasat_write_eeprom_info();
+ lasat_init_board_info();
}
- if (filp && filp->f_path.dentry) {
- if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
- lasat_board_info.li_eeprom_info.prid =
- lasat_board_info.li_prid;
- if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
- lasat_board_info.li_eeprom_info.debugaccess =
- lasat_board_info.li_debugaccess;
- }
- lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
extern int lasat_boot_to_service;
-#ifdef CONFIG_SYSCTL
-
static ctl_table lasat_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
@@ -349,8 +281,8 @@ static ctl_table lasat_table[] = {
.data = &lasat_board_info.li_prid,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_lasat_eeprom_value,
- .strategy = &sysctl_lasat_eeprom_value
+ .proc_handler = &proc_lasat_prid,
+ .strategy = &sysctl_lasat_prid
},
#ifdef CONFIG_INET
{
@@ -363,7 +295,7 @@ static ctl_table lasat_table[] = {
.strategy = &sysctl_lasat_intvec
},
{
- .ctl_name = LASAT_NETMASK,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "netmask",
.data = &lasat_board_info.li_eeprom_info.netmask,
.maxlen = sizeof(int),
@@ -371,15 +303,6 @@ static ctl_table lasat_table[] = {
.proc_handler = &proc_lasat_ip,
.strategy = &sysctl_lasat_intvec
},
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "bcastaddr",
- .data = &lasat_bcastaddr,
- .maxlen = sizeof(lasat_bcastaddr),
- .mode = 0600,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string
- },
#endif
{
.ctl_name = CTL_UNNUMBERED,
@@ -417,7 +340,7 @@ static ctl_table lasat_table[] = {
.data = &lasat_board_info.li_namestr,
.maxlen = sizeof(lasat_board_info.li_namestr),
.mode = 0444,
- .proc_handler = &proc_dostring,
+ .proc_handler = &proc_dostring,
.strategy = &sysctl_string
},
{
@@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void)
lasat_table_header =
register_sysctl_table(lasat_root_table);
+ if (!lasat_table_header) {
+ printk(KERN_ERR "Unable to register LASAT sysctl\n");
+ return -ENOMEM;
+ }
return 0;
}
__initcall(lasat_register_sysctl);
-#endif /* CONFIG_SYSCTL */
diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h
deleted file mode 100644
index 341b9793342..00000000000
--- a/arch/mips/lasat/sysctl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * LASAT sysctl values
- */
-
-#ifndef _LASAT_SYSCTL_H
-#define _LASAT_SYSCTL_H
-
-/* /proc/sys/lasat */
-enum {
- LASAT_CPU_HZ = 1,
- LASAT_BUS_HZ,
- LASAT_MODEL,
- LASAT_PRID,
- LASAT_IPADDR,
- LASAT_NETMASK,
- LASAT_BCAST,
- LASAT_PASSWORD,
- LASAT_SBOOT,
- LASAT_RTC,
- LASAT_NAMESTR,
- LASAT_TYPESTR,
-};
-
-#endif /* _LASAT_SYSCTL_H */
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c
index b7633fda418..96236bf3383 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mips-boards/generic/amon.c
@@ -28,7 +28,7 @@
int amon_cpu_avail(int cpu)
{
- struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (cpu < 0 || cpu >= NCPULAUNCH) {
pr_debug("avail: cpu%d is out of range\n", cpu);
@@ -53,7 +53,7 @@ void amon_cpu_start(int cpu,
unsigned long gp, unsigned long a0)
{
volatile struct cpulaunch *launch =
- (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (!amon_cpu_avail(cpu))
return;
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index 8dc6e2ac4c0..db4ad654a6d 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -19,9 +19,8 @@
# under Linux.
#
-obj-y := malta_int.o malta_platform.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-obj-$(CONFIG_MTD) += malta_mtd.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 643c8bcffff..27096751ddc 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args)
struct page *page = pfn_to_page(fcp_args->pfn);
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
+ int map_coherent = 0;
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
@@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args)
* Use kmap_coherent or kmap_atomic to do flushes for
* another ASID than the current one.
*/
- if (cpu_has_dc_aliases)
+ map_coherent = (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page));
+ if (map_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page, KM_USER0);
@@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args)
}
if (vaddr) {
- if (cpu_has_dc_aliases)
+ if (map_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr, KM_USER0);
@@ -1226,6 +1229,28 @@ void au1x00_fixup_config_od(void)
}
}
+/* CP0 hazard avoidance. */
+#define NXP_BARRIER() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+static void nxp_pr4450_fixup_config(void)
+{
+ unsigned long config0;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7 << 25) | (7 << 28));
+ config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 25) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 28));
+ write_c0_config(config0);
+ NXP_BARRIER();
+}
+
static int __cpuinitdata cca = -1;
static int __init cca_setup(char *str)
@@ -1271,6 +1296,10 @@ static void __cpuinit coherency_setup(void)
case CPU_AU1500: /* rev. AB */
au1x00_fixup_config_od();
break;
+
+ case PRID_IMP_PR4450:
+ nxp_pr4450_fixup_config();
+ break;
}
}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index ecd562d2c34..137c14bafd6 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
* don't have to care about aliases on other CPUs.
*/
unsigned long empty_zero_page, zero_page_mask;
+EXPORT_SYMBOL_GPL(empty_zero_page);
/*
* Not static inline because used by IP27 special magic initialization code
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index cab81f42eee..1edf0cbbeed 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void)
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c
index f92826e0096..57dd903ca40 100644
--- a/arch/mips/nxp/pnx8550/jbs/board_setup.c
+++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c
@@ -47,16 +47,7 @@
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
- BARRIER;
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c
index 1282c27cfcb..af2a55e0b4e 100644
--- a/arch/mips/nxp/pnx8550/stb810/board_setup.c
+++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c
@@ -33,15 +33,7 @@
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 42e4d2c800f..2a09ad91ec8 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = {
static int __init sb1250_pcibios_init(void)
{
+ void __iomem *io_map_base;
uint32_t cmdreg;
uint64_t reg;
extern int pci_probe_only;
@@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void)
* works correctly with most of Linux's drivers.
* XXX ehs: Should this happen in PCI Device mode?
*/
-
- set_io_port_base((unsigned long)
- ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
isa_slot_offset = (unsigned long)
ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
+ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
+ sb1250_controller.io_map_base = io_map_base;
+ set_io_port_base((unsigned long)io_map_base);
+
#ifdef CONFIG_SIBYTE_HAS_LDT
/*
* Also check the LDT bridge's enable, just in case we didn't
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index 33c4f683d06..d1e049b55f3 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
@@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void)
ioport_resource.end = IO_PORT_RESOURCE_END;
}
+ if (setup->master_io) {
+ void __iomem *io_map_base;
+ struct resource *res = vr41xx_pci_controller.io_resource;
+ master = setup->master_io;
+ io_map_base = ioremap(master->bus_base_address,
+ res->end - res->start + 1);
+ if (!io_map_base)
+ return -EBUSY;
+
+ vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base;
+ }
+
register_pci_controller(&vr41xx_pci_controller);
return 0;
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 2d626039195..1775755a261 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,3 @@
-lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
-lib-$(CONFIG_KGDB) += dbg_io.o
+obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 3b0d579fc15..9c623c88387 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -20,7 +20,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/reboot.h>
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 6b7ce263685..017121ce896 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9dcdc036cdf..b7d4c4ce2fe 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -96,6 +96,8 @@ endif
else
KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
endif
+else
+LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
ifeq ($(CONFIG_TUNE_CELL),y)
@@ -154,7 +156,7 @@ all: zImage
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index d53b84e761a..095e04db1c0 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-src-wlib := string.S crt0.S stdio.c main.c \
+src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
@@ -273,7 +273,8 @@ endif
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
initrd-y := $(patsubst zImage%, zImage.initrd%, \
$(patsubst dtbImage%, dtbImage.initrd%, \
- $(patsubst treeImage%, treeImage.initrd%, $(image-y))))
+ $(patsubst simpleImage%, simpleImage.initrd%, \
+ $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
initrd-y := $(filter-out $(image-y), $(initrd-y))
targets += $(image-y) $(initrd-y)
diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S
new file mode 100644
index 00000000000..f3d9b35c07d
--- /dev/null
+++ b/arch/powerpc/boot/crtsavres.S
@@ -0,0 +1,233 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+ .file "crtsavres.S"
+ .section ".text"
+
+/* On PowerPC64 Linux, these functions are provided by the linker. */
+#ifndef __powerpc64__
+
+#define _GLOBAL(name) \
+ .type name,@function; \
+ .globl name; \
+name:
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad016f..f3083c779b6 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a30f9a..0e872a60e09 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7d329..1eb8defaff6 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -164,12 +164,6 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index fa298a8c81c..4811b810741 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -409,7 +409,7 @@
interrupts = <26 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -428,7 +428,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x8000000>;
+ 0x0 0x100000>;
};
};
};
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 7d18440e398..5428f9f5ed8 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Fri Apr 11 11:10:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -196,7 +201,6 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -211,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +245,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +255,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -362,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -445,6 +451,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -641,7 +648,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -661,6 +667,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -668,6 +675,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -724,6 +732,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -751,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -762,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -795,6 +796,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -804,17 +806,12 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -919,12 +916,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -977,16 +984,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1004,6 +1015,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,7 +1035,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1061,6 +1075,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1072,6 +1087,7 @@ CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -1090,6 +1106,7 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1144,11 +1161,8 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1168,7 +1182,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1237,7 +1250,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1282,6 +1294,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1302,6 +1315,7 @@ CONFIG_HAVE_LMB=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1312,6 +1326,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1324,6 +1339,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1335,6 +1351,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1345,51 +1362,81 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 1f57456dd81..9bc3a03ae26 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -247,11 +255,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -361,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -444,6 +451,7 @@ CONFIG_MTD_NAND_IDS=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -549,7 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -559,13 +571,11 @@ CONFIG_ATA=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_FSL=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -605,6 +615,7 @@ CONFIG_SATA_FSL=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -698,7 +709,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -718,6 +728,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -725,6 +736,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -781,6 +793,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -808,7 +821,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -819,13 +831,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -852,6 +857,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -861,17 +867,12 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -976,12 +977,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1034,16 +1045,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1061,6 +1076,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1080,7 +1096,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1118,6 +1136,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1129,6 +1148,7 @@ CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -1147,6 +1167,7 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1201,11 +1222,8 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1225,7 +1243,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1294,7 +1311,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1339,6 +1355,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1351,6 +1368,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1358,6 +1376,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1368,6 +1387,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1380,6 +1400,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1391,6 +1412,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1401,51 +1423,81 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 50cceda8994..1eca26f3659 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:51 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:22 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -522,7 +529,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -546,6 +552,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -553,6 +560,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -600,6 +608,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -628,7 +637,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -639,13 +647,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -671,6 +672,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -680,19 +682,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -775,12 +771,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -811,6 +817,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -819,6 +827,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -870,11 +879,8 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -894,7 +900,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -952,7 +957,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -995,6 +999,7 @@ CONFIG_UCC=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1005,6 +1010,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1012,6 +1018,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1021,6 +1028,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1030,52 +1038,82 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index ac913025713..de95d327463 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -212,11 +217,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -526,7 +533,6 @@ CONFIG_E1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -550,6 +556,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -557,6 +564,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -613,6 +621,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -653,13 +662,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -686,6 +688,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -695,17 +698,12 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -809,12 +807,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -867,16 +875,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -894,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -913,7 +926,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -951,6 +966,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -962,6 +978,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@@ -972,14 +989,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -999,7 +1013,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1060,7 +1073,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1147,6 +1159,7 @@ CONFIG_UCC=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=y
@@ -1157,6 +1170,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1164,6 +1178,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1173,6 +1188,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1182,52 +1198,82 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e1de399a7bd..b47fc918570 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:17 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:25 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -541,7 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -551,13 +562,11 @@ CONFIG_ATA=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -598,6 +607,7 @@ CONFIG_SATA_SIL=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -659,7 +669,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -679,6 +688,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -686,6 +696,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -722,6 +733,7 @@ CONFIG_NETDEV_10000=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -749,7 +761,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -760,13 +771,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -793,6 +797,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -802,17 +807,12 @@ CONFIG_I2C_MPC=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -862,12 +862,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -905,16 +915,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -925,6 +939,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -945,6 +960,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -982,10 +998,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1040,11 +1058,8 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1064,7 +1079,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1126,7 +1140,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1210,6 +1223,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1220,6 +1234,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1227,6 +1242,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1236,6 +1252,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1245,51 +1262,81 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index b4e39cf82a8..fdac4845bad 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:18 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -587,7 +594,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -607,6 +613,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -614,6 +621,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -650,6 +658,7 @@ CONFIG_NETDEV_10000=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -677,7 +686,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -688,13 +696,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -721,6 +722,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -730,17 +732,12 @@ CONFIG_I2C_MPC=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -790,12 +787,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -833,16 +840,20 @@ CONFIG_USB=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -853,6 +864,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,6 +885,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -909,10 +922,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -967,11 +982,8 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -991,7 +1003,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1053,7 +1064,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1137,6 +1147,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1147,6 +1158,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1154,6 +1166,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1163,6 +1176,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1172,51 +1186,81 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index b4e82c0e2be..c82e96e984f 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:56 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -471,7 +478,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -491,6 +497,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -498,6 +505,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -544,6 +552,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -571,7 +580,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -582,13 +590,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -614,6 +615,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -623,19 +625,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -718,12 +714,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -754,6 +760,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -762,6 +770,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -813,11 +822,8 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -837,7 +843,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -895,7 +900,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -936,6 +940,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -946,6 +951,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -953,6 +959,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -962,6 +969,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -971,51 +979,81 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index d50a96eddcd..20fd9f58cf4 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:57 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:27 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -110,12 +113,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +527,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -544,6 +550,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -551,6 +558,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -598,6 +606,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -626,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -637,13 +645,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -669,6 +670,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -678,19 +680,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -773,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -809,6 +815,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -817,6 +825,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -868,11 +877,8 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -892,7 +898,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -950,7 +955,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -993,6 +997,7 @@ CONFIG_UCC=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1003,6 +1008,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1010,6 +1016,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1019,6 +1026,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1028,52 +1036,82 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f377cde785b..0f94d9f56be 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:23 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:28 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -350,6 +356,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -411,8 +418,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
@@ -459,6 +468,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -503,6 +513,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -537,13 +548,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -552,6 +556,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -561,19 +566,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -646,12 +645,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -680,6 +689,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -688,13 +699,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -714,7 +722,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -772,7 +779,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -817,6 +823,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -827,6 +834,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -834,6 +842,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -841,6 +850,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -850,50 +860,80 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a6331769d88..0d448556f53 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:24 2008
+# Linux kernel version: 2.6.26-rc5
+# Tue Jun 10 09:17:12 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -211,11 +216,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -345,6 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -352,6 +359,7 @@ CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -406,8 +414,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -444,7 +454,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -464,6 +474,16 @@ CONFIG_GFAR_NAPI=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -508,6 +528,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -542,13 +563,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -557,6 +571,8 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -566,19 +582,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -642,6 +652,11 @@ CONFIG_WATCHDOG=y
CONFIG_83xx_WDT=y
#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
@@ -651,13 +666,24 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -680,6 +706,14 @@ CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -695,33 +729,83 @@ CONFIG_USB=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -741,7 +825,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -799,7 +882,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -844,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -854,6 +937,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -861,6 +945,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -868,6 +953,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -881,50 +967,80 @@ CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1f1518229f6..1752918be2c 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:38 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -109,12 +112,14 @@ CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -232,6 +239,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -241,11 +249,11 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -293,8 +301,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -348,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -420,6 +427,7 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -464,6 +472,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -498,13 +507,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -513,6 +515,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -522,19 +525,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -607,12 +604,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -640,13 +647,10 @@ CONFIG_HID=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -659,7 +663,6 @@ CONFIG_HID=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -717,7 +720,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -746,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -756,6 +759,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -763,6 +767,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -770,6 +775,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -779,50 +785,80 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 2d0debcefdb..b82bb042308 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Mon Feb 11 16:25:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -68,23 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -92,6 +93,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -109,6 +111,8 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -134,7 +138,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
@@ -191,12 +194,13 @@ CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -207,16 +211,17 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
CONFIG_ISA_DMA_API=y
#
@@ -229,6 +234,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +244,12 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +297,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -351,6 +356,8 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -430,17 +437,19 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
@@ -457,7 +466,7 @@ CONFIG_IDE_PROC_FS=y
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -517,6 +526,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -561,6 +571,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -594,12 +605,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -615,6 +621,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -627,12 +634,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -660,19 +677,20 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -693,14 +711,11 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -743,15 +758,16 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -790,6 +806,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -800,6 +817,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -807,6 +825,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -817,7 +836,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -829,9 +850,9 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
@@ -841,6 +862,7 @@ CONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -852,48 +874,78 @@ CONFIG_FORCED_INLINING=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index b998539da86..f33fd516fd5 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:31 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC8540_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -229,6 +236,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +246,12 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -290,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -419,6 +426,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -463,6 +471,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -494,12 +503,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -528,12 +532,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -561,6 +575,8 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -569,13 +585,10 @@ CONFIG_USB_SUPPORT=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -595,7 +608,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -652,7 +664,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -691,6 +702,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -701,6 +713,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -708,6 +721,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -718,6 +732,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -730,6 +745,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -740,6 +756,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -750,47 +767,77 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a9f113b243a..042a85ea7b7 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:03 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:32 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -203,7 +208,6 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -219,11 +223,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -248,6 +254,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -257,11 +264,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -332,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -395,6 +405,7 @@ CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -501,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -511,13 +526,11 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -557,6 +570,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -622,7 +636,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -642,6 +655,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -649,6 +663,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -713,6 +728,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -744,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -755,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -788,6 +796,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -797,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -826,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -875,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -900,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -918,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1005,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1079,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1118,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1145,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1164,7 +1191,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1202,10 +1231,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1257,23 +1288,19 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=y
-# CONFIG_FSL_DMA_SELFTEST is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1293,7 +1320,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1363,10 +1389,9 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1450,9 +1475,10 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1469,6 +1495,7 @@ CONFIG_HAVE_LMB=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1479,6 +1506,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1492,6 +1520,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1503,6 +1532,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1513,52 +1543,82 @@ CONFIG_DEBUG_INFO=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 851ac911561..e19592b4204 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:27 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:33 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -210,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -247,11 +255,12 @@ CONFIG_PCI_DEBUG=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -462,7 +469,6 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -482,6 +488,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -489,6 +496,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -535,6 +543,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -572,12 +581,7 @@ CONFIG_GEN_RTC=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -610,12 +614,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -646,6 +660,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -654,14 +670,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -681,7 +694,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -738,7 +750,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -777,6 +788,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -787,6 +799,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -794,6 +807,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -804,6 +818,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -816,6 +831,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -827,6 +843,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -837,49 +854,79 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 2b866b38560..28004e93aee 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:05 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:34 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -111,12 +114,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -156,6 +161,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -212,11 +218,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +248,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +258,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -301,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -358,6 +366,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -546,6 +554,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -553,6 +562,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -600,6 +610,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -629,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -640,13 +650,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -672,6 +675,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -681,19 +685,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -776,12 +774,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -812,6 +820,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -820,6 +830,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -871,11 +882,8 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,7 +903,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -953,7 +960,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -994,6 +1000,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1004,6 +1011,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1011,6 +1019,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1021,6 +1030,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1033,6 +1043,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1045,6 +1056,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -1066,52 +1078,82 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 53aa6f3173a..03627cfebcb 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:06 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:35 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -217,11 +223,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -246,6 +254,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -255,11 +264,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -330,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -393,6 +405,7 @@ CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -499,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -509,13 +526,11 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -555,6 +570,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -620,7 +636,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -640,6 +655,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -647,6 +663,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -711,6 +728,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -742,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -753,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -786,6 +796,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -795,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -824,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -873,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -898,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -916,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1003,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1077,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1116,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1143,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1162,7 +1191,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1200,10 +1231,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1255,11 +1288,8 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1279,7 +1309,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1349,10 +1378,9 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1436,9 +1464,10 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1447,6 +1476,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1454,6 +1484,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1477,6 +1509,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1488,6 +1521,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1498,52 +1532,82 @@ CONFIG_DEBUG_INFO=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index a469fe91881..b09f0032a10 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:30 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:36 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,6 +116,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -153,6 +157,7 @@ CONFIG_MPC85xx=y
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -208,11 +213,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -236,6 +243,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -245,11 +253,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -297,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -437,7 +444,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -515,7 +522,6 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -535,6 +541,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -542,6 +549,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -588,6 +596,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -624,12 +633,7 @@ CONFIG_GEN_RTC=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -662,12 +666,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -698,6 +712,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -706,14 +722,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -733,7 +746,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -790,7 +802,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -829,6 +840,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -839,6 +851,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -846,6 +859,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -856,6 +870,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -868,6 +883,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -878,6 +894,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -888,48 +905,78 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 67f67978c74..24f7f44b482 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:37 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@ CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -206,11 +211,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -522,6 +530,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -742,6 +752,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index fef605579e2..655518dcd73 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,6 +115,7 @@ CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -152,6 +156,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -207,11 +212,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -228,6 +235,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -237,11 +245,12 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -289,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -418,6 +425,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -462,6 +470,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -487,17 +496,11 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -526,12 +529,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -559,6 +572,8 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -567,6 +582,7 @@ CONFIG_USB_SUPPORT=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -602,11 +618,8 @@ CONFIG_RTC_DRV_M48T59=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -619,7 +632,6 @@ CONFIG_RTC_DRV_M48T59=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -676,7 +688,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -715,6 +726,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -725,6 +737,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -732,6 +745,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -742,6 +756,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -753,6 +768,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -763,6 +779,7 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
@@ -784,47 +801,77 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 1d303c49bb0..7804ca1ecc9 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:42 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,12 +117,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -158,6 +163,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -215,11 +221,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -243,6 +251,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -252,11 +261,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -304,8 +314,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -418,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
@@ -505,7 +514,7 @@ CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -653,7 +662,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -673,6 +681,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -680,6 +689,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -753,6 +763,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -796,13 +807,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -829,6 +833,7 @@ CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -838,19 +843,13 @@ CONFIG_I2C_ALGOBIT=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -920,12 +919,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -973,6 +982,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -981,15 +992,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1009,7 +1017,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1073,7 +1080,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1141,9 +1147,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
@@ -1152,6 +1159,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1159,6 +1167,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1169,6 +1178,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1182,6 +1192,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1194,6 +1205,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1204,50 +1216,80 @@ CONFIG_BDI_SWITCH=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index d39ee3b35bf..e0b5559e84a 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:43 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:39 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
@@ -171,7 +176,6 @@ CONFIG_MPIC=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
#
@@ -208,11 +212,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -233,6 +239,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -242,11 +249,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -294,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -352,6 +358,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -423,6 +430,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -506,7 +514,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -600,7 +608,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -620,6 +627,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -627,6 +635,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -673,6 +682,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -713,13 +723,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -744,6 +747,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -753,19 +757,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -835,12 +833,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -871,6 +879,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -879,14 +889,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -906,7 +913,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -974,7 +980,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1013,6 +1018,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1025,6 +1031,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1032,6 +1039,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1041,6 +1049,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1050,48 +1059,78 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index cbf6ad2d71d..6f9067b49e0 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:40 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_TQM8541=y
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index bbff962c847..03120b5b52f 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:41 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 63c5ec8b651..3113257edf5 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:45 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:42 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -209,11 +214,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -675,6 +685,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1035,6 +1042,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index a3cc94a2ff0..6740f2a3aa3 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Wed Feb 20 12:26:07 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:08 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -107,6 +110,8 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -131,7 +136,6 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
@@ -194,7 +198,6 @@ CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
@@ -213,11 +216,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -235,6 +240,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -244,13 +250,13 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -293,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -482,6 +486,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -548,6 +553,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -580,12 +586,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -602,12 +603,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -632,12 +643,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -650,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -708,7 +716,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -751,6 +758,7 @@ CONFIG_MSDOS_PARTITION=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -761,6 +769,7 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -768,6 +777,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -778,6 +788,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -788,6 +799,7 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -798,6 +810,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -811,3 +824,4 @@ CONFIG_DEBUG_INFO=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 2b1504e0a11..ba2a463b930 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +107,7 @@ CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -194,11 +195,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -215,6 +218,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -224,11 +228,11 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -283,6 +287,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -498,6 +503,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -521,6 +527,7 @@ CONFIG_NETDEV_10000=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -552,12 +559,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -574,12 +576,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -603,12 +615,9 @@ CONFIG_DAB=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -675,7 +684,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -752,6 +760,7 @@ CONFIG_NLS_UTF8=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -763,6 +772,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -770,6 +780,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -780,6 +791,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -791,6 +803,7 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -802,6 +815,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -811,45 +825,75 @@ CONFIG_BDI_SWITCH=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 125b4764aad..ac72b48542d 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -212,11 +215,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -234,6 +239,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -243,13 +249,13 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -292,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -481,6 +485,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -505,6 +510,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -537,12 +543,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -559,12 +560,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -588,13 +599,10 @@ CONFIG_DAB=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -607,7 +615,6 @@ CONFIG_DAB=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -665,7 +672,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -708,6 +714,7 @@ CONFIG_MSDOS_PARTITION=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -718,6 +725,7 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -725,6 +733,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -735,6 +744,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -745,6 +755,7 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -755,6 +766,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -767,3 +779,4 @@ CONFIG_DEBUG_INFO=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index db34909831a..0ccc6e493dc 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:18 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:08:31 2008
#
CONFIG_PPC64=y
@@ -597,7 +597,61 @@ CONFIG_ATA=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -1230,6 +1284,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1345,6 +1400,7 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 22a943afc3c..48434c2c762 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:10 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +121,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -223,11 +228,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -251,6 +258,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -260,11 +268,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -313,8 +321,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -329,6 +335,7 @@ CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -407,6 +414,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -459,8 +467,6 @@ CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -486,6 +492,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -565,6 +572,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -670,7 +678,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -680,13 +692,11 @@ CONFIG_ATA=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -726,6 +736,7 @@ CONFIG_PATA_SIL680=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -785,7 +796,6 @@ CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -805,6 +815,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -812,6 +823,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -886,6 +898,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -913,7 +926,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -924,13 +936,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -957,6 +962,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -966,19 +972,13 @@ CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1048,12 +1048,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1115,12 +1125,14 @@ CONFIG_USB_DEVICE_CLASS=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1138,6 +1150,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1159,6 +1172,7 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1202,9 +1216,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1238,10 +1254,12 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1293,11 +1311,8 @@ CONFIG_RTC_DRV_RS5C372=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1318,10 +1333,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1388,12 +1402,10 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1467,9 +1479,10 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1481,6 +1494,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1488,6 +1502,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1498,6 +1513,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1510,6 +1526,7 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1521,6 +1538,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1532,52 +1550,82 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index a3d52e3f2de..066c583c1f8 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:11 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -209,11 +213,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -235,6 +241,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -244,11 +251,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -296,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -454,7 +459,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -464,7 +472,6 @@ CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -509,6 +516,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -596,7 +604,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -616,6 +623,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -623,6 +631,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -670,6 +679,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -705,12 +715,7 @@ CONFIG_GEN_RTC=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -743,12 +748,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -779,6 +794,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -787,14 +804,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -814,7 +828,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -871,7 +884,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -914,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -924,6 +937,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -931,6 +945,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -940,6 +955,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -950,48 +966,78 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 0264c5757f7..30d7834b7db 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:13 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:12 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +108,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -224,6 +227,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -233,11 +237,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -292,6 +296,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -536,7 +541,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -554,6 +558,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -561,6 +566,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
@@ -634,6 +640,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -668,12 +675,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -690,12 +692,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -722,13 +734,10 @@ CONFIG_DAB=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -798,7 +807,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -877,6 +885,7 @@ CONFIG_NLS_UTF8=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -889,6 +898,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -896,6 +906,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -906,6 +917,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -918,6 +930,7 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -929,6 +942,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -938,45 +952,75 @@ CONFIG_BDI_SWITCH=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 9e0dd820169..4293c8be06e 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 18:07:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:14 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -201,7 +206,6 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -217,11 +221,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +246,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +256,11 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -301,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -361,6 +366,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -439,6 +445,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -501,8 +508,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
@@ -554,6 +563,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -607,6 +617,7 @@ CONFIG_INPUT=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -642,13 +653,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
CONFIG_I2C_MPC=y
@@ -658,6 +662,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -667,19 +672,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -757,12 +756,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -810,16 +819,20 @@ CONFIG_USB=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
@@ -828,6 +841,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,17 +887,15 @@ CONFIG_USB_MON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -903,7 +915,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -962,7 +973,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1009,6 +1019,7 @@ CONFIG_UCC=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1027,6 +1038,7 @@ CONFIG_HAVE_LMB=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1034,6 +1046,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1043,51 +1056,81 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 2075722911b..3efab71a603 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:08 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 09:03:46 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx_DS=y
+CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
CONFIG_TQM8541=y
@@ -221,11 +227,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -250,6 +258,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -259,11 +268,12 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -334,8 +344,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -397,6 +409,7 @@ CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -503,7 +516,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -513,13 +530,11 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -559,6 +574,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -625,7 +641,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -646,6 +661,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -653,6 +669,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -717,6 +734,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -750,7 +768,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -761,13 +778,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -794,6 +804,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -803,19 +814,13 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -832,13 +837,33 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -881,14 +906,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -906,6 +934,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -924,27 +953,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1011,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1085,11 +1109,11 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1124,16 +1148,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1151,6 +1179,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1170,7 +1199,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1208,12 +1239,21 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1263,11 +1303,19 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
-# CONFIG_DMADEVICES is not set
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
#
-# Userspace I/O
+# DMA Devices
#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
# CONFIG_UIO is not set
#
@@ -1287,7 +1335,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1357,10 +1404,9 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1444,9 +1490,10 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1455,6 +1502,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1462,6 +1510,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1472,6 +1521,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1485,6 +1535,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1497,6 +1548,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1507,53 +1559,83 @@ CONFIG_DEBUG_INFO=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 7e5b9ce58d8..5612d40d046 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:33 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:50:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -60,9 +62,10 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -86,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -110,14 +114,22 @@ CONFIG_SLUB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
@@ -151,6 +163,7 @@ CONFIG_PPC_86xx=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8610=y
# CONFIG_IPIC is not set
@@ -199,11 +212,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -223,12 +238,14 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -238,11 +255,11 @@ CONFIG_PCI_DEBUG=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -303,8 +320,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -446,6 +465,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -504,6 +524,7 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -553,7 +574,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -563,13 +588,11 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -609,6 +632,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -628,25 +652,9 @@ CONFIG_DUMMY=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -663,64 +671,10 @@ CONFIG_ULI526X=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
@@ -728,6 +682,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -783,6 +738,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -824,13 +780,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -852,9 +801,11 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -864,19 +815,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -893,12 +838,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -908,7 +863,56 @@ CONFIG_DAB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -922,6 +926,8 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
#
# Sound
@@ -938,7 +944,7 @@ CONFIG_SND_PCM=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
@@ -965,6 +971,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1031,14 +1038,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_SOC=y
#
-# SoC Audio support for SuperH
-#
-
-#
# ALSA SoC audio for Freescale SOCs
#
CONFIG_SND_SOC_MPC8610=y
CONFIG_SND_SOC_MPC8610_HPCD=y
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
@@ -1055,6 +1062,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1063,14 +1072,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1090,7 +1096,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -1134,6 +1139,7 @@ CONFIG_TMPFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
@@ -1147,10 +1153,9 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1234,6 +1239,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1244,6 +1250,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1251,6 +1258,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1261,6 +1269,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1274,9 +1283,11 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1284,6 +1295,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1294,48 +1306,80 @@ CONFIG_DEBUG_INFO=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index d01dcdb70bd..4a817150739 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:15 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -162,6 +167,7 @@ CONFIG_PPC_86xx=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
+# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
# CONFIG_IPIC is not set
@@ -211,11 +217,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -240,6 +248,8 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
@@ -249,11 +259,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -324,8 +334,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -387,6 +399,7 @@ CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -493,7 +506,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -503,13 +520,11 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -549,6 +564,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -614,7 +630,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -634,6 +649,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -641,6 +657,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -705,6 +722,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -736,7 +754,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -747,13 +764,6 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -780,6 +790,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -789,19 +800,13 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -818,13 +823,33 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
@@ -867,14 +892,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
@@ -892,6 +920,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
@@ -910,27 +939,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -997,6 +1020,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1071,11 +1095,11 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1110,16 +1134,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1137,6 +1165,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1156,7 +1185,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1194,10 +1225,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1249,11 +1282,8 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1273,7 +1303,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1343,10 +1372,9 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1430,9 +1458,10 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1441,6 +1470,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1448,6 +1478,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1458,6 +1489,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1471,6 +1503,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1482,6 +1515,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1492,52 +1526,82 @@ CONFIG_DEBUG_INFO=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 2d831db9ae5..46fffbcd3f9 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:16 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -106,6 +108,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -210,11 +213,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -231,6 +236,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -240,13 +246,13 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -294,8 +300,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -419,6 +423,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -485,6 +490,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -517,12 +523,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -551,12 +552,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -584,6 +595,8 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -592,13 +605,10 @@ CONFIG_USB_SUPPORT=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -620,7 +630,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -678,7 +687,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -722,6 +730,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -733,6 +742,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -740,6 +750,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -748,6 +759,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -757,48 +769,78 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 82151b9bba2..9df78973005 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:17 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -108,6 +110,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
@@ -219,11 +222,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -241,6 +246,7 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -250,13 +256,13 @@ CONFIG_FSL_SOC=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -299,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -492,6 +496,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -516,6 +521,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -548,12 +554,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -570,12 +571,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -599,13 +610,10 @@ CONFIG_DAB=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -618,7 +626,6 @@ CONFIG_DAB=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
@@ -676,7 +683,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -719,6 +725,7 @@ CONFIG_MSDOS_PARTITION=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -729,6 +736,7 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -736,6 +744,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -746,6 +755,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -756,6 +766,7 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -766,6 +777,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -778,3 +790,4 @@ CONFIG_DEBUG_INFO=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 40f84fa2bd2..ce250bc9858 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:02 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:11:19 2008
#
CONFIG_PPC64=y
@@ -763,7 +763,63 @@ CONFIG_ATA_NONSTANDARD=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCC is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -1478,6 +1534,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1537,6 +1594,7 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1597,6 +1655,7 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1617,6 +1676,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PPC=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 1383eb696a2..bc3bf62ddc2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -70,19 +72,17 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -109,6 +109,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -196,11 +197,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -225,6 +228,7 @@ CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -234,11 +238,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
@@ -293,6 +297,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -513,7 +518,7 @@ CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -593,7 +598,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -611,6 +615,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -618,6 +623,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
@@ -692,6 +698,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -726,12 +733,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -748,12 +750,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -781,11 +793,14 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -795,6 +810,7 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -804,6 +820,7 @@ CONFIG_USB_M66592=y
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
@@ -812,13 +829,10 @@ CONFIG_USB_ETH=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -888,7 +902,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -967,6 +980,7 @@ CONFIG_NLS_UTF8=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -979,6 +993,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -986,6 +1001,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -996,6 +1012,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1008,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1019,6 +1037,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,46 +1047,76 @@ CONFIG_BDI_SWITCH=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f9121685f11..c6b83577c05 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
@@ -33,6 +33,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -92,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -117,6 +120,7 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -215,11 +219,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -241,6 +247,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -250,13 +257,13 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -304,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -364,6 +369,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -435,6 +441,7 @@ CONFIG_MTD_PHYSMAP_OF=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -519,7 +526,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -598,7 +605,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -608,7 +618,6 @@ CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -653,6 +662,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -744,7 +754,6 @@ CONFIG_E1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -763,6 +772,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -770,6 +780,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -832,6 +843,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -855,7 +867,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -866,13 +877,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -898,6 +902,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_MV64XXX=y
#
@@ -908,19 +913,13 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -990,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1055,11 +1064,13 @@ CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1074,6 +1085,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1120,10 +1132,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -1175,11 +1189,8 @@ CONFIG_RTC_DRV_MAX6900=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1199,7 +1210,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1257,7 +1267,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1300,6 +1309,7 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1310,6 +1320,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1317,6 +1328,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1326,6 +1338,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1336,48 +1349,78 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 3180125aa6c..8227510b41a 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Apr 10 18:03:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:19 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -197,7 +202,6 @@ CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -213,11 +217,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -237,12 +243,14 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -252,11 +260,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -328,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -534,6 +544,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -610,6 +621,7 @@ CONFIG_MTD_PHYSMAP_OF=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -727,7 +739,6 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -743,6 +754,7 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
@@ -825,6 +837,7 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -863,13 +876,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -895,6 +901,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -904,19 +911,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -998,12 +999,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -1041,6 +1052,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1049,14 +1062,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1084,8 +1094,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -1145,7 +1155,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1221,6 +1230,7 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1241,6 +1251,7 @@ CONFIG_HAVE_LMB=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1251,6 +1262,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1262,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1274,6 +1287,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1289,54 +1303,84 @@ CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index fdbfd39a3ac..88f6aa8273b 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:20 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -85,6 +87,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -109,12 +112,14 @@ CONFIG_SLUB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -214,11 +219,13 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
@@ -242,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -251,11 +259,11 @@ CONFIG_PCI_LEGACY=y
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -358,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -433,6 +440,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -513,7 +521,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -638,7 +646,6 @@ CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -654,6 +661,7 @@ CONFIG_R8169=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -690,6 +698,7 @@ CONFIG_R8169=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -717,7 +726,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -728,13 +736,6 @@ CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
@@ -761,6 +762,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -770,19 +772,13 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -799,12 +795,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -841,16 +847,20 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -865,6 +875,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -885,6 +896,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -922,10 +934,12 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -977,11 +991,8 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1002,10 +1013,9 @@ CONFIG_FS_MBCACHE=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1138,6 +1148,7 @@ CONFIG_NLS_UTF8=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1150,6 +1161,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1157,6 +1169,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1166,6 +1179,7 @@ CONFIG_HAS_DMA=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1181,3 +1195,4 @@ CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index c2b9dc4fce5..22b5d2c459a 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -368,7 +368,12 @@ interrupt_base:
rlwimi r11,r13,0,26,31 /* Insert static perms */
- rlwinm r11,r11,0,20,15 /* Clear U0-U3 */
+ /*
+ * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+ * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+ * include/asm-powerpc/pgtable-ppc32.h for details).
+ */
+ rlwinm r11,r11,0,20,10
/* find the TLB index that caused the fault. It has to be here. */
tlbsx r10, 0, r10
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2f73f705d56..bcc249d90c4 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -1073,7 +1073,7 @@ static const struct file_operations virq_debug_fops = {
static int __init irq_debugfs_init(void)
{
if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
- NULL, &virq_debug_fops))
+ NULL, &virq_debug_fops) == NULL)
return -ENOMEM;
return 0;
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 61dd17449dd..cf37f5ca4b7 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -136,6 +136,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
+ /* if reg-shift or offset, don't try to use it */
+ if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
+ (of_get_property(np, "reg-offset", NULL) != NULL))
+ return -1;
+
/* if rtas uses this device, don't try to use it as well */
if (of_get_property(np, "used-by-rtas", NULL) != NULL)
return -1;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index cf6b5a7d8b3..d3ac631cbd2 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -8,7 +8,6 @@
#include <linux/screen_info.h>
#include <linux/vt_kern.h>
#include <linux/nvram.h>
-#include <linux/console.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -160,7 +159,6 @@ EXPORT_SYMBOL(screen_info);
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 31729a9387d..2c7e8e87f77 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -48,6 +48,20 @@ do
fi
done
+ # ignore register save/restore funcitons
+ if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+ OK=1
+ fi
+
if [ $OK -eq 0 ]; then
ERROR=1
echo "Error: External symbol '$UNDEF' referenced" \
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index c21a626af67..ce245a850db 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg)
printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT),
page_count(pg),
pg->flags);
- if (upg/* && pg != upg*/) {
+ if (upg && !IS_ERR(upg) /* && pg != upg*/) {
printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
<< PAGE_SHIFT),
page_count(upg),
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index c71d37dc6a8..e522b06cc42 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -9,7 +9,7 @@ endif
ifeq ($(CONFIG_PPC_MERGE),y)
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
new file mode 100644
index 00000000000..70a9cd8a300
--- /dev/null
+++ b/arch/powerpc/lib/crtsavres.S
@@ -0,0 +1,229 @@
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+#include <asm/ppc_asm.h>
+
+ .file "crtsavres.S"
+ .section ".text"
+
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 21d24848647..70f4c833fa3 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -568,6 +568,10 @@ htab_inval_old_hpte:
ld r7,STK_PARM(r9)(r1) /* ssize */
ld r8,STK_PARM(r8)(r1) /* local */
bl .flush_hash_page
+ /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
+ lis r0,_PAGE_HPTE_SUB@h
+ ori r0,r0,_PAGE_HPTE_SUB@l
+ andc r30,r30,r0
b htab_insert_pte
htab_bail_ok:
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
index 41c7fd91e99..fe92e65103e 100644
--- a/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -14,6 +14,7 @@ static struct mpc52xx_sdma __iomem *bes;
static struct mpc52xx_xlb __iomem *xlb;
static struct mpc52xx_gpio __iomem *gps;
static struct mpc52xx_gpio_wkup __iomem *gpw;
+static void __iomem *pci;
static void __iomem *sram;
static const int sram_size = 0x4000; /* 16 kBytes */
static void __iomem *mbar;
@@ -50,6 +51,8 @@ static int lite5200_pm_prepare(void)
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
{}
};
+ u64 regaddr64 = 0;
+ const u32 *regaddr_p;
/* deep sleep? let mpc52xx code handle that */
if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
@@ -60,8 +63,12 @@ static int lite5200_pm_prepare(void)
/* map registers */
np = of_find_matching_node(NULL, immr_ids);
- mbar = of_iomap(np, 0);
+ regaddr_p = of_get_address(np, 0, NULL, NULL);
+ if (regaddr_p)
+ regaddr64 = of_translate_address(np, regaddr_p);
of_node_put(np);
+
+ mbar = ioremap((u32) regaddr64, 0xC000);
if (!mbar) {
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
return -ENOSYS;
@@ -71,6 +78,7 @@ static int lite5200_pm_prepare(void)
pic = mbar + 0x500;
gps = mbar + 0xb00;
gpw = mbar + 0xc00;
+ pci = mbar + 0xd00;
bes = mbar + 0x1200;
xlb = mbar + 0x1f00;
sram = mbar + 0x8000;
@@ -85,6 +93,7 @@ static struct mpc52xx_sdma sbes;
static struct mpc52xx_xlb sxlb;
static struct mpc52xx_gpio sgps;
static struct mpc52xx_gpio_wkup sgpw;
+static char spci[0x200];
static void lite5200_save_regs(void)
{
@@ -94,6 +103,7 @@ static void lite5200_save_regs(void)
_memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
_memcpy_fromio(&sgps, gps, sizeof(*gps));
_memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
+ _memcpy_fromio(spci, pci, 0x200);
_memcpy_fromio(saved_sram, sram, sram_size);
}
@@ -103,6 +113,8 @@ static void lite5200_restore_regs(void)
int i;
_memcpy_toio(sram, saved_sram, sram_size);
+ /* PCI Configuration */
+ _memcpy_toio(pci, spci, 0x200);
/*
* GPIOs. Interrupt Master Enable has higher address then other
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7ff29d53dc2..ecbe580c3f3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@ config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
+ select PHYLIB
help
This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 70c660121ec..78f905bc6a4 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -219,15 +219,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
+ int ret;
+
pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
- /* Handle kernel space hash faults immediately.
- User hash faults need to be deferred to process context. */
- if ((dsisr & MFC_DSISR_PTE_NOT_FOUND)
- && REGION_ID(ea) != USER_REGION_ID
- && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) {
- spu_restart_dma(spu);
- return 0;
+ /*
+ * Handle kernel space hash faults immediately. User hash
+ * faults need to be deferred to process context.
+ */
+ if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) &&
+ (REGION_ID(ea) != USER_REGION_ID)) {
+
+ spin_unlock(&spu->register_lock);
+ ret = hash_page(ea, _PAGE_PRESENT, 0x300);
+ spin_lock(&spu->register_lock);
+
+ if (!ret) {
+ spu_restart_dma(spu);
+ return 0;
+ }
}
spu->class_1_dar = ea;
@@ -324,17 +334,13 @@ spu_irq_class_0(int irq, void *data)
stat = spu_int_stat_get(spu, 0) & mask;
spu->class_0_pending |= stat;
- spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
spu->class_0_dar = spu_mfc_dar_get(spu);
- spin_unlock(&spu->register_lock);
-
spu->stop_callback(spu, 0);
-
spu->class_0_pending = 0;
- spu->class_0_dsisr = 0;
spu->class_0_dar = 0;
spu_int_stat_clear(spu, 0, stat);
+ spin_unlock(&spu->register_lock);
return IRQ_HANDLED;
}
@@ -357,13 +363,12 @@ spu_irq_class_1(int irq, void *data)
spu_mfc_dsisr_set(spu, 0ul);
spu_int_stat_clear(spu, 1, stat);
- if (stat & CLASS1_SEGMENT_FAULT_INTR)
- __spu_trap_data_seg(spu, dar);
-
- spin_unlock(&spu->register_lock);
pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
+ if (stat & CLASS1_SEGMENT_FAULT_INTR)
+ __spu_trap_data_seg(spu, dar);
+
if (stat & CLASS1_STORAGE_FAULT_INTR)
__spu_trap_data_map(spu, dar, dsisr);
@@ -376,6 +381,8 @@ spu_irq_class_1(int irq, void *data)
spu->class_1_dsisr = 0;
spu->class_1_dar = 0;
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
@@ -394,14 +401,12 @@ spu_irq_class_2(int irq, void *data)
mask = spu_int_mask_get(spu, 2);
/* ignore interrupts we're not waiting for */
stat &= mask;
-
/* mailbox interrupts are level triggered. mask them now before
* acknowledging */
if (stat & mailbox_intrs)
spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs));
/* acknowledge all interrupts before the callbacks */
spu_int_stat_clear(spu, 2, stat);
- spin_unlock(&spu->register_lock);
pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
@@ -421,6 +426,9 @@ spu_irq_class_2(int irq, void *data)
spu->wbox_callback(spu);
spu->stats.class2_intr++;
+
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index b7493b86581..f7edba6cb79 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -27,7 +27,6 @@ void spufs_stop_callback(struct spu *spu, int irq)
switch(irq) {
case 0 :
ctx->csa.class_0_pending = spu->class_0_pending;
- ctx->csa.class_0_dsisr = spu->class_0_dsisr;
ctx->csa.class_0_dar = spu->class_0_dar;
break;
case 1 :
@@ -51,18 +50,22 @@ int spu_stopped(struct spu_context *ctx, u32 *stat)
u64 dsisr;
u32 stopped;
- *stat = ctx->ops->status_read(ctx);
-
- if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
- return 1;
-
stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
- if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
+
+top:
+ *stat = ctx->ops->status_read(ctx);
+ if (*stat & stopped) {
+ /*
+ * If the spu hasn't finished stopping, we need to
+ * re-read the register to get the stopped value.
+ */
+ if (*stat & SPU_STATUS_RUNNING)
+ goto top;
return 1;
+ }
- dsisr = ctx->csa.class_0_dsisr;
- if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+ if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
return 1;
dsisr = ctx->csa.class_1_dsisr;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 745dd51ec37..e929e70a84e 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -230,19 +230,23 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
ctx->stats.slb_flt_base = spu->stats.slb_flt;
ctx->stats.class2_intr_base = spu->stats.class2_intr;
+ spu_associate_mm(spu, ctx->owner);
+
+ spin_lock_irq(&spu->register_lock);
spu->ctx = ctx;
spu->flags = 0;
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
spu->tgid = current->tgid;
- spu_associate_mm(spu, ctx->owner);
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
spu->mfc_callback = spufs_mfc_callback;
- mb();
+ spin_unlock_irq(&spu->register_lock);
+
spu_unmap_mappings(ctx);
+
spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
spu_restore(&ctx->csa, spu);
spu->timestamp = jiffies;
@@ -403,6 +407,8 @@ static int has_affinity(struct spu_context *ctx)
*/
static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
{
+ u32 status;
+
spu_context_trace(spu_unbind_context__enter, ctx, spu);
spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
@@ -423,18 +429,22 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
spu_unmap_mappings(ctx);
spu_save(&ctx->csa, spu);
spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
+
+ spin_lock_irq(&spu->register_lock);
spu->timestamp = jiffies;
ctx->state = SPU_STATE_SAVED;
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
spu->mfc_callback = NULL;
- spu_associate_mm(spu, NULL);
spu->pid = 0;
spu->tgid = 0;
ctx->ops = &spu_backing_ops;
spu->flags = 0;
spu->ctx = NULL;
+ spin_unlock_irq(&spu->register_lock);
+
+ spu_associate_mm(spu, NULL);
ctx->stats.slb_flt +=
(spu->stats.slb_flt - ctx->stats.slb_flt_base);
@@ -444,6 +454,9 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
/* This maps the underlying spu state to idle */
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
ctx->spu = NULL;
+
+ if (spu_stopped(ctx, &status))
+ wake_up_all(&ctx->stop_wq);
}
/**
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 68ea5eee39a..8c1ca477c52 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -42,17 +42,20 @@ static inline const char * pcid_name (struct pci_dev *pdev)
}
#ifdef DEBUG
-static void print_device_node_tree (struct pci_dn *pdn, int dent)
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
{
int i;
- if (!pdn) return;
- for (i=0;i<dent; i++)
+ struct device_node *pc;
+
+ if (!pdn)
+ return;
+ for (i = 0; i < dent; i++)
printk(" ");
printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
pdn->eeh_pe_config_addr, pdn->node->full_name);
dent += 3;
- struct device_node *pc = pdn->node->child;
+ pc = pdn->node->child;
while (pc) {
print_device_node_tree(PCI_DN(pc), dent);
pc = pc->sibling;
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index f68903e15bd..42f7e384e6c 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -131,8 +131,10 @@ int __init pSeries_nvram_init(void)
return -ENODEV;
nbytes_p = of_get_property(nvram, "#bytes", &proplen);
- if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+ if (nbytes_p == NULL || proplen != sizeof(unsigned int)) {
+ of_node_put(nvram);
return -EIO;
+ }
nvram_size = *nbytes_p;
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 1702de9395e..bfcf70ee895 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2844,7 +2844,6 @@ static void dump_spu_fields(struct spu *spu)
DUMP_FIELD(spu, "0x%lx", flags);
DUMP_FIELD(spu, "%d", class_0_pending);
DUMP_FIELD(spu, "0x%lx", class_0_dar);
- DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
DUMP_FIELD(spu, "0x%lx", class_1_dar);
DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
DUMP_FIELD(spu, "0x%lx", irqs[0]);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 52e18e6d2ba..bf07b6f50fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -383,6 +383,7 @@ config VMI
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on !(X86_VISWS || X86_VOYAGER)
help
Turning on this option will allow you to run a paravirtualized clock
@@ -410,6 +411,10 @@ config PARAVIRT
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_CLOCK
+ bool
+ default n
+
endif
config MEMTEST_BOOTPARAM
@@ -961,8 +966,8 @@ config NUMA_EMU
number of nodes. This is only useful for debugging.
config NODES_SHIFT
- int "Max num nodes shift(1-15)"
- range 1 15 if X86_64
+ int "Max num nodes shift(1-9)"
+ range 1 9 if X86_64
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3b472..77807d4769c 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
index e8edd63ab00..9b08e852fd1 100644
--- a/arch/x86/kernel/geode_32.c
+++ b/arch/x86/kernel/geode_32.c
@@ -166,6 +166,8 @@ int geode_has_vsa2(void)
static int has_vsa2 = -1;
if (has_vsa2 == -1) {
+ u16 val;
+
/*
* The VSA has virtual registers that we can query for a
* signature.
@@ -173,7 +175,8 @@ int geode_has_vsa2(void)
outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
- has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+ val = inw(VSA_VRC_DATA);
+ has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
}
return has_vsa2;
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index eb9ddd8efb8..95e80e5033c 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
int ret;
if (!cpu_has_fxsr)
- return -ENODEV;
+ return -EIO;
ret = init_fpu(target);
if (ret)
@@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
int ret;
if (!cpu_has_fxsr)
- return -ENODEV;
+ return -EIO;
ret = init_fpu(target);
if (ret)
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 08a30986d47..87edf1ceb1d 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -18,6 +18,7 @@
#include <linux/clocksource.h>
#include <linux/kvm_para.h>
+#include <asm/pvclock.h>
#include <asm/arch_hooks.h>
#include <asm/msr.h>
#include <asm/apic.h>
@@ -36,18 +37,9 @@ static int parse_no_kvmclock(char *arg)
early_param("no-kvmclock", parse_no_kvmclock);
/* The hypervisor will put information about time periodically here */
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock);
-#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock);
+static struct pvclock_wall_clock wall_clock;
-static inline u64 kvm_get_delta(u64 last_tsc)
-{
- int cpu = smp_processor_id();
- u64 delta = native_read_tsc() - last_tsc;
- return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE;
-}
-
-static struct kvm_wall_clock wall_clock;
-static cycle_t kvm_clock_read(void);
/*
* The wallclock is the time of day when we booted. Since then, some time may
* have elapsed since the hypervisor wrote the data. So we try to account for
@@ -55,64 +47,37 @@ static cycle_t kvm_clock_read(void);
*/
static unsigned long kvm_get_wallclock(void)
{
- u32 wc_sec, wc_nsec;
- u64 delta;
+ struct pvclock_vcpu_time_info *vcpu_time;
struct timespec ts;
- int version, nsec;
int low, high;
low = (int)__pa(&wall_clock);
high = ((u64)__pa(&wall_clock) >> 32);
+ native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- delta = kvm_clock_read();
+ vcpu_time = &get_cpu_var(hv_clock);
+ pvclock_read_wallclock(&wall_clock, vcpu_time, &ts);
+ put_cpu_var(hv_clock);
- native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- do {
- version = wall_clock.wc_version;
- rmb();
- wc_sec = wall_clock.wc_sec;
- wc_nsec = wall_clock.wc_nsec;
- rmb();
- } while ((wall_clock.wc_version != version) || (version & 1));
-
- delta = kvm_clock_read() - delta;
- delta += wc_nsec;
- nsec = do_div(delta, NSEC_PER_SEC);
- set_normalized_timespec(&ts, wc_sec + delta, nsec);
- /*
- * Of all mechanisms of time adjustment I've tested, this one
- * was the champion!
- */
- return ts.tv_sec + 1;
+ return ts.tv_sec;
}
static int kvm_set_wallclock(unsigned long now)
{
- return 0;
+ return -1;
}
-/*
- * This is our read_clock function. The host puts an tsc timestamp each time
- * it updates a new time. Without the tsc adjustment, we can have a situation
- * in which a vcpu starts to run earlier (smaller system_time), but probes
- * time later (compared to another vcpu), leading to backwards time
- */
static cycle_t kvm_clock_read(void)
{
- u64 last_tsc, now;
- int cpu;
+ struct pvclock_vcpu_time_info *src;
+ cycle_t ret;
- preempt_disable();
- cpu = smp_processor_id();
-
- last_tsc = get_clock(cpu, tsc_timestamp);
- now = get_clock(cpu, system_time);
-
- now += kvm_get_delta(last_tsc);
- preempt_enable();
-
- return now;
+ src = &get_cpu_var(hv_clock);
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(hv_clock);
+ return ret;
}
+
static struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_read,
@@ -123,13 +88,14 @@ static struct clocksource kvm_clock = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int kvm_register_clock(void)
+static int kvm_register_clock(char *txt)
{
int cpu = smp_processor_id();
int low, high;
low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1;
high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32);
-
+ printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
+ cpu, high, low, txt);
return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
}
@@ -140,12 +106,20 @@ static void kvm_setup_secondary_clock(void)
* Now that the first cpu already had this clocksource initialized,
* we shouldn't fail.
*/
- WARN_ON(kvm_register_clock());
+ WARN_ON(kvm_register_clock("secondary cpu clock"));
/* ok, done with our trickery, call native */
setup_secondary_APIC_clock();
}
#endif
+#ifdef CONFIG_SMP
+void __init kvm_smp_prepare_boot_cpu(void)
+{
+ WARN_ON(kvm_register_clock("primary cpu clock"));
+ native_smp_prepare_boot_cpu();
+}
+#endif
+
/*
* After the clock is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
@@ -174,7 +148,7 @@ void __init kvmclock_init(void)
return;
if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
- if (kvm_register_clock())
+ if (kvm_register_clock("boot clock"))
return;
pv_time_ops.get_wallclock = kvm_get_wallclock;
pv_time_ops.set_wallclock = kvm_set_wallclock;
@@ -182,6 +156,9 @@ void __init kvmclock_init(void)
#ifdef CONFIG_X86_LOCAL_APIC
pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
#endif
+#ifdef CONFIG_SMP
+ smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
+#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
machine_ops.crash_shutdown = kvm_crash_shutdown;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index c5ef1af8e79..dc00a1331ac 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -378,6 +378,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
struct page *page;
unsigned long dma_mask = 0;
dma_addr_t bus;
+ int noretry = 0;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
@@ -397,20 +398,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
if (dev->dma_mask == NULL)
return NULL;
- /* Don't invoke OOM killer */
- gfp |= __GFP_NORETRY;
+ /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+ if (gfp & __GFP_DMA)
+ noretry = 1;
#ifdef CONFIG_X86_64
/* Why <=? Even when the mask is smaller than 4GB it is often
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
gfp |= GFP_DMA32;
+ if (dma_mask < DMA_32BIT_MASK)
+ noretry = 1;
+ }
#endif
again:
- page = dma_alloc_pages(dev, gfp, get_order(size));
+ page = dma_alloc_pages(dev,
+ noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
if (page == NULL)
return NULL;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 6d5483356e7..e2db9ac5c61 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -333,6 +333,7 @@ void flush_thread(void)
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ac54ff56df8..c6eb5c91e5f 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -294,6 +294,7 @@ void flush_thread(void)
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
new file mode 100644
index 00000000000..05fbe9a0325
--- /dev/null
+++ b/arch/x86/kernel/pvclock.c
@@ -0,0 +1,141 @@
+/* paravirtual clock -- common code used by kvm/xen
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <asm/pvclock.h>
+
+/*
+ * These are perodically updated
+ * xen: magic shared_info page
+ * kvm: gpa registered via msr
+ * and then copied here.
+ */
+struct pvclock_shadow_time {
+ u64 tsc_timestamp; /* TSC at last update of time vals. */
+ u64 system_timestamp; /* Time, in nanosecs, since boot. */
+ u32 tsc_to_nsec_mul;
+ int tsc_shift;
+ u32 version;
+};
+
+/*
+ * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
+ * yielding a 64-bit result.
+ */
+static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
+{
+ u64 product;
+#ifdef __i386__
+ u32 tmp1, tmp2;
+#endif
+
+ if (shift < 0)
+ delta >>= -shift;
+ else
+ delta <<= shift;
+
+#ifdef __i386__
+ __asm__ (
+ "mul %5 ; "
+ "mov %4,%%eax ; "
+ "mov %%edx,%4 ; "
+ "mul %5 ; "
+ "xor %5,%5 ; "
+ "add %4,%%eax ; "
+ "adc %5,%%edx ; "
+ : "=A" (product), "=r" (tmp1), "=r" (tmp2)
+ : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
+#elif __x86_64__
+ __asm__ (
+ "mul %%rdx ; shrd $32,%%rdx,%%rax"
+ : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+#else
+#error implement me!
+#endif
+
+ return product;
+}
+
+static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
+{
+ u64 delta = native_read_tsc() - shadow->tsc_timestamp;
+ return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
+}
+
+/*
+ * Reads a consistent set of time-base values from hypervisor,
+ * into a shadow data area.
+ */
+static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst,
+ struct pvclock_vcpu_time_info *src)
+{
+ do {
+ dst->version = src->version;
+ rmb(); /* fetch version before data */
+ dst->tsc_timestamp = src->tsc_timestamp;
+ dst->system_timestamp = src->system_time;
+ dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
+ dst->tsc_shift = src->tsc_shift;
+ rmb(); /* test version after fetching data */
+ } while ((src->version & 1) || (dst->version != src->version));
+
+ return dst->version;
+}
+
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
+{
+ struct pvclock_shadow_time shadow;
+ unsigned version;
+ cycle_t ret, offset;
+
+ do {
+ version = pvclock_get_time_values(&shadow, src);
+ barrier();
+ offset = pvclock_get_nsec_offset(&shadow);
+ ret = shadow.system_timestamp + offset;
+ barrier();
+ } while (version != src->version);
+
+ return ret;
+}
+
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
+ struct pvclock_vcpu_time_info *vcpu_time,
+ struct timespec *ts)
+{
+ u32 version;
+ u64 delta;
+ struct timespec now;
+
+ /* get wallclock at system boot */
+ do {
+ version = wall_clock->version;
+ rmb(); /* fetch version before time */
+ now.tv_sec = wall_clock->sec;
+ now.tv_nsec = wall_clock->nsec;
+ rmb(); /* fetch time before checking version */
+ } while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+ delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */
+ delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
+
+ now.tv_nsec = do_div(delta, NSEC_PER_SEC);
+ now.tv_sec = delta;
+
+ set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2c5f8b213e8..5a2f8e06388 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void)
(unsigned long)(crash_size >> 20),
(unsigned long)(crash_base >> 20),
(unsigned long)(total_mem >> 20));
+
+ if (reserve_bootmem(crash_base, crash_size,
+ BOOTMEM_EXCLUSIVE) < 0) {
+ printk(KERN_INFO "crashkernel reservation "
+ "failed - memory is in use\n");
+ return;
+ }
+
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
- reserve_bootmem(crash_base, crash_size,
- BOOTMEM_DEFAULT);
} else
printk(KERN_INFO "crashkernel reservation failed - "
"you have to specify a base address\n");
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 56078d61c79..3e1cecedde4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -996,7 +996,6 @@ do_rest:
#endif
cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
- cpu_clear(cpu, cpu_possible_map);
cpu_clear(cpu, cpu_present_map);
per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
}
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 068759db63d..65b70637ad9 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,10 @@
#include "mach_timer.h"
-static int tsc_disabled;
+/* native_sched_clock() is called before tsc_init(), so
+ we must start with the TSC soft disabled to prevent
+ erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
/*
* On some systems the TSC frequency does not
@@ -402,25 +405,20 @@ void __init tsc_init(void)
{
int cpu;
- if (!cpu_has_tsc || tsc_disabled) {
- /* Disable the TSC in case of !cpu_has_tsc */
- tsc_disabled = 1;
+ if (!cpu_has_tsc || tsc_disabled > 0)
return;
- }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
- /*
- * We need to disable the TSC completely in this case
- * to prevent sched_clock() from using it.
- */
- tsc_disabled = 1;
return;
}
+ /* now allow native_sched_clock() to use rdtsc */
+ tsc_disabled = 0;
+
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index f2f5d260874..3829aa7b663 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -200,9 +200,12 @@ int __pit_timer_fn(struct kvm_kpit_state *ps)
atomic_inc(&pt->pending);
smp_mb__after_atomic_inc();
- if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
- vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
- wake_up_interruptible(&vcpu0->wq);
+ if (vcpu0) {
+ set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
+ if (waitqueue_active(&vcpu0->wq)) {
+ vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+ wake_up_interruptible(&vcpu0->wq);
+ }
}
pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index c297c50eba6..ebc03f5ae16 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -940,6 +940,7 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
wait_queue_head_t *q = &apic->vcpu->wq;
atomic_inc(&apic->timer.pending);
+ set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
if (waitqueue_active(q)) {
apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
wake_up_interruptible(q);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index ee3f53098f0..7e7c3969f7a 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -640,6 +640,7 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
rmap_remove(kvm, spte);
--kvm->stat.lpages;
set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+ spte = NULL;
write_protected = 1;
}
spte = rmap_next(kvm, rmapp, spte);
@@ -1082,10 +1083,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
struct kvm_mmu_page *shadow;
spte |= PT_WRITABLE_MASK;
- if (user_fault) {
- mmu_unshadow(vcpu->kvm, gfn);
- goto unshadowed;
- }
shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
if (shadow ||
@@ -1102,8 +1099,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
}
}
-unshadowed:
-
if (pte_access & ACC_WRITE_MASK)
mark_page_dirty(vcpu->kvm, gfn);
@@ -1580,11 +1575,13 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
u64 *spte,
const void *new)
{
- if ((sp->role.level != PT_PAGE_TABLE_LEVEL)
- && !vcpu->arch.update_pte.largepage) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
+ if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
+ if (!vcpu->arch.update_pte.largepage ||
+ sp->role.glevels == PT32_ROOT_LEVEL) {
+ ++vcpu->kvm->stat.mmu_pde_zapped;
+ return;
+ }
+ }
++vcpu->kvm->stat.mmu_pte_updated;
if (sp->role.glevels == PT32_ROOT_LEVEL)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 02efbe75f31..540e9517907 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -566,7 +566,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
load_transition_efer(vmx);
}
-static void vmx_load_host_state(struct vcpu_vmx *vmx)
+static void __vmx_load_host_state(struct vcpu_vmx *vmx)
{
unsigned long flags;
@@ -596,6 +596,13 @@ static void vmx_load_host_state(struct vcpu_vmx *vmx)
reload_host_efer(vmx);
}
+static void vmx_load_host_state(struct vcpu_vmx *vmx)
+{
+ preempt_disable();
+ __vmx_load_host_state(vmx);
+ preempt_enable();
+}
+
/*
* Switches to specified vcpu, until a matching vcpu_put(), but assumes
* vcpu mutex is already taken.
@@ -654,7 +661,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
{
- vmx_load_host_state(to_vmx(vcpu));
+ __vmx_load_host_state(to_vmx(vcpu));
}
static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
@@ -884,11 +891,8 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
switch (msr_index) {
#ifdef CONFIG_X86_64
case MSR_EFER:
+ vmx_load_host_state(vmx);
ret = kvm_set_msr_common(vcpu, msr_index, data);
- if (vmx->host_state.loaded) {
- reload_host_efer(vmx);
- load_transition_efer(vmx);
- }
break;
case MSR_FS_BASE:
vmcs_writel(GUEST_FS_BASE, data);
@@ -910,11 +914,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
guest_write_tsc(data);
break;
default:
+ vmx_load_host_state(vmx);
msr = find_msr_entry(vmx, msr_index);
if (msr) {
msr->data = data;
- if (vmx->host_state.loaded)
- load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
break;
}
ret = kvm_set_msr_common(vcpu, msr_index, data);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 00acf1301a1..63a77caa59f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -492,8 +492,8 @@ static int do_set_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data)
static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
{
static int version;
- struct kvm_wall_clock wc;
- struct timespec wc_ts;
+ struct pvclock_wall_clock wc;
+ struct timespec now, sys, boot;
if (!wall_clock)
return;
@@ -502,10 +502,19 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
- wc_ts = current_kernel_time();
- wc.wc_sec = wc_ts.tv_sec;
- wc.wc_nsec = wc_ts.tv_nsec;
- wc.wc_version = version;
+ /*
+ * The guest calculates current wall clock time by adding
+ * system time (updated by kvm_write_guest_time below) to the
+ * wall clock specified here. guest system time equals host
+ * system time for us, thus we must fill in host boot time here.
+ */
+ now = current_kernel_time();
+ ktime_get_ts(&sys);
+ boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+
+ wc.sec = boot.tv_sec;
+ wc.nsec = boot.tv_nsec;
+ wc.version = version;
kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc));
@@ -513,6 +522,45 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
}
+static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
+{
+ uint32_t quotient, remainder;
+
+ /* Don't try to replace with do_div(), this one calculates
+ * "(dividend << 32) / divisor" */
+ __asm__ ( "divl %4"
+ : "=a" (quotient), "=d" (remainder)
+ : "0" (0), "1" (dividend), "r" (divisor) );
+ return quotient;
+}
+
+static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *hv_clock)
+{
+ uint64_t nsecs = 1000000000LL;
+ int32_t shift = 0;
+ uint64_t tps64;
+ uint32_t tps32;
+
+ tps64 = tsc_khz * 1000LL;
+ while (tps64 > nsecs*2) {
+ tps64 >>= 1;
+ shift--;
+ }
+
+ tps32 = (uint32_t)tps64;
+ while (tps32 <= (uint32_t)nsecs) {
+ tps32 <<= 1;
+ shift++;
+ }
+
+ hv_clock->tsc_shift = shift;
+ hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32);
+
+ pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n",
+ __FUNCTION__, tsc_khz, hv_clock->tsc_shift,
+ hv_clock->tsc_to_system_mul);
+}
+
static void kvm_write_guest_time(struct kvm_vcpu *v)
{
struct timespec ts;
@@ -523,6 +571,11 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
if ((!vcpu->time_page))
return;
+ if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) {
+ kvm_set_time_scale(tsc_khz, &vcpu->hv_clock);
+ vcpu->hv_clock_tsc_khz = tsc_khz;
+ }
+
/* Keep irq disabled to prevent changes to the clock */
local_irq_save(flags);
kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
@@ -537,14 +590,14 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
/*
* The interface expects us to write an even number signaling that the
* update is finished. Since the guest won't see the intermediate
- * state, we just write "2" at the end
+ * state, we just increase by 2 at the end.
*/
- vcpu->hv_clock.version = 2;
+ vcpu->hv_clock.version += 2;
shared_kaddr = kmap_atomic(vcpu->time_page, KM_USER0);
memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
- sizeof(vcpu->hv_clock));
+ sizeof(vcpu->hv_clock));
kunmap_atomic(shared_kaddr, KM_USER0);
@@ -599,10 +652,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
/* ...but clean it before doing the actual write */
vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
- vcpu->arch.hv_clock.tsc_to_system_mul =
- clocksource_khz2mult(tsc_khz, 22);
- vcpu->arch.hv_clock.tsc_shift = 22;
-
down_read(&current->mm->mmap_sem);
vcpu->arch.time_page =
gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
@@ -2759,6 +2808,8 @@ again:
if (vcpu->requests) {
if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
__kvm_migrate_timers(vcpu);
+ if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
+ kvm_x86_ops->tlb_flush(vcpu);
if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
&vcpu->requests)) {
kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
@@ -2772,6 +2823,7 @@ again:
}
}
+ clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
kvm_inject_pending_timer_irqs(vcpu);
preempt_disable();
@@ -2781,21 +2833,13 @@ again:
local_irq_disable();
- if (need_resched()) {
+ if (vcpu->requests || need_resched()) {
local_irq_enable();
preempt_enable();
r = 1;
goto out;
}
- if (vcpu->requests)
- if (test_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests)) {
- local_irq_enable();
- preempt_enable();
- r = 1;
- goto out;
- }
-
if (signal_pending(current)) {
local_irq_enable();
preempt_enable();
@@ -2825,9 +2869,6 @@ again:
kvm_guest_enter();
- if (vcpu->requests)
- if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
- kvm_x86_ops->tlb_flush(vcpu);
KVMTRACE_0D(VMENTRY, vcpu, entryexit);
kvm_x86_ops->run(vcpu, kvm_run);
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 70bebd31040..ee1c3f63515 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled)
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled)
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 5196762b3b0..9d3d1ab8376 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache)
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache)
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 156e6d7b0e3..f6d20be7a8f 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -135,7 +135,7 @@ static __init void *spp_getpage(void)
return ptr;
}
-static void
+static __init void
set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
{
pgd_t *pgd;
@@ -214,7 +214,7 @@ void __init cleanup_highmap(void)
}
/* NOTE: this is meant to be run only at boot */
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
+void __init __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
{
unsigned long address = __fix_to_virt(idx);
@@ -506,7 +506,7 @@ early_param("memtest", parse_memtest);
static void __init early_memtest(unsigned long start, unsigned long end)
{
- u64 t_start, t_size;
+ unsigned long t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
@@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end)
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016llx - %016llx pattern %d",
+ printk(KERN_CONT "\n %016lx - %016lx pattern %d",
t_start, t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 6e64aaf00d1..940185ecaed 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
#endif
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
{}
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 2e641be2737..6c388e593bc 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -5,8 +5,9 @@
config XEN
bool "Xen guest support"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on X86_32
- depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER)
+ depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
help
This is the Linux Xen port. Enabling this will allow the
kernel to boot in a paravirtualized environment under the
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index c8a56e457d6..f09c1c69c37 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
static __init void xen_pagetable_setup_start(pgd_t *base)
{
pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
+ int i;
/* special set_pte for pagetable initialization */
pv_mmu_ops.set_pte = xen_set_pte_init;
init_mm.pgd = base;
/*
- * copy top-level of Xen-supplied pagetable into place. For
- * !PAE we can use this as-is, but for PAE it is a stand-in
- * while we copy the pmd pages.
+ * copy top-level of Xen-supplied pagetable into place. This
+ * is a stand-in while we copy the pmd pages.
*/
memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
- if (PTRS_PER_PMD > 1) {
- int i;
- /*
- * For PAE, need to allocate new pmds, rather than
- * share Xen's, since Xen doesn't like pmd's being
- * shared between address spaces.
- */
- for (i = 0; i < PTRS_PER_PGD; i++) {
- if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
- pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+ /*
+ * For PAE, need to allocate new pmds, rather than
+ * share Xen's, since Xen doesn't like pmd's being
+ * shared between address spaces.
+ */
+ for (i = 0; i < PTRS_PER_PGD; i++) {
+ if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
+ pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
- memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
- PAGE_SIZE);
+ memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
+ PAGE_SIZE);
- make_lowmem_page_readonly(pmd);
+ make_lowmem_page_readonly(pmd);
- set_pgd(&base[i], __pgd(1 + __pa(pmd)));
- } else
- pgd_clear(&base[i]);
- }
+ set_pgd(&base[i], __pgd(1 + __pa(pmd)));
+ } else
+ pgd_clear(&base[i]);
}
/* make sure zero_page is mapped RO so we can use it in pagetables */
@@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base)
/* Actually pin the pagetable down, but we can't set PG_pinned
yet because the page structures don't exist yet. */
- {
- unsigned level;
-
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- pin_pagetable_pfn(level, PFN_DOWN(__pa(base)));
- }
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
}
/* This is called once we have the cpu_possible_map */
@@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
.make_pte = xen_make_pte,
.make_pgd = xen_make_pgd,
-#ifdef CONFIG_X86_PAE
.set_pte_atomic = xen_set_pte_atomic,
.set_pte_present = xen_set_pte_at,
.set_pud = xen_set_pud,
@@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
.make_pmd = xen_make_pmd,
.pmd_val = xen_pmd_val,
-#endif /* PAE */
.activate_mm = xen_activate_mm,
.dup_mmap = xen_dup_mmap,
@@ -1228,6 +1213,11 @@ asmlinkage void __init xen_start_kernel(void)
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+ /* Prevent unwanted bits from being set in PTEs. */
+ __supported_pte_mask &= ~_PAGE_GLOBAL;
+ if (!is_initial_xendomain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
/* set the limit of our address space */
xen_reserve_top();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 3525ef523a7..df40bf74ea7 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -179,50 +179,56 @@ out:
preempt_enable();
}
-pteval_t xen_pte_val(pte_t pte)
+/* Assume pteval_t is equivalent to all the other *val_t types. */
+static pteval_t pte_mfn_to_pfn(pteval_t val)
+{
+ if (val & _PAGE_PRESENT) {
+ unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+ }
+
+ return val;
+}
+
+static pteval_t pte_pfn_to_mfn(pteval_t val)
{
- pteval_t ret = pte.pte;
+ if (val & _PAGE_PRESENT) {
+ unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
+ }
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
+ return val;
+}
- return ret;
+pteval_t xen_pte_val(pte_t pte)
+{
+ return pte_mfn_to_pfn(pte.pte);
}
pgdval_t xen_pgd_val(pgd_t pgd)
{
- pgdval_t ret = pgd.pgd;
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pgd.pgd);
}
pte_t xen_make_pte(pteval_t pte)
{
- if (pte & _PAGE_PRESENT) {
- pte = phys_to_machine(XPADDR(pte)).maddr;
- pte &= ~(_PAGE_PCD | _PAGE_PWT);
- }
-
- return (pte_t){ .pte = pte };
+ pte = pte_pfn_to_mfn(pte);
+ return native_make_pte(pte);
}
pgd_t xen_make_pgd(pgdval_t pgd)
{
- if (pgd & _PAGE_PRESENT)
- pgd = phys_to_machine(XPADDR(pgd)).maddr;
-
- return (pgd_t){ pgd };
+ pgd = pte_pfn_to_mfn(pgd);
+ return native_make_pgd(pgd);
}
pmdval_t xen_pmd_val(pmd_t pmd)
{
- pmdval_t ret = native_pmd_val(pmd);
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pmd.pmd);
}
-#ifdef CONFIG_X86_PAE
+
void xen_set_pud(pud_t *ptr, pud_t val)
{
struct multicall_space mcs;
@@ -267,17 +273,9 @@ void xen_pmd_clear(pmd_t *pmdp)
pmd_t xen_make_pmd(pmdval_t pmd)
{
- if (pmd & _PAGE_PRESENT)
- pmd = phys_to_machine(XPADDR(pmd)).maddr;
-
+ pmd = pte_pfn_to_mfn(pmd);
return native_make_pmd(pmd);
}
-#else /* !PAE */
-void xen_set_pte(pte_t *ptep, pte_t pte)
-{
- *ptep = pte;
-}
-#endif /* CONFIG_X86_PAE */
/*
(Yet another) pagetable walker. This one is intended for pinning a
@@ -430,8 +428,6 @@ static int pin_page(struct page *page, enum pt_level level)
read-only, and can be pinned. */
void xen_pgd_pin(pgd_t *pgd)
{
- unsigned level;
-
xen_mc_batch();
if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
@@ -441,14 +437,7 @@ void xen_pgd_pin(pgd_t *pgd)
xen_mc_batch();
}
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- xen_do_pin(level, PFN_DOWN(__pa(pgd)));
-
+ xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
xen_mc_issue(0);
}
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index b5e189b1519..5fe961caffd 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm);
void xen_pgd_pin(pgd_t *pgd);
//void xen_pgd_unpin(pgd_t *pgd);
-#ifdef CONFIG_X86_PAE
-unsigned long long xen_pte_val(pte_t);
-unsigned long long xen_pmd_val(pmd_t);
-unsigned long long xen_pgd_val(pgd_t);
+pteval_t xen_pte_val(pte_t);
+pmdval_t xen_pmd_val(pmd_t);
+pgdval_t xen_pgd_val(pgd_t);
-pte_t xen_make_pte(unsigned long long);
-pmd_t xen_make_pmd(unsigned long long);
-pgd_t xen_make_pgd(unsigned long long);
+pte_t xen_make_pte(pteval_t);
+pmd_t xen_make_pmd(pmdval_t);
+pgd_t xen_make_pgd(pgdval_t);
void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval);
@@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val);
void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
void xen_pmd_clear(pmd_t *pmdp);
-
-#else
-unsigned long xen_pte_val(pte_t);
-unsigned long xen_pmd_val(pmd_t);
-unsigned long xen_pgd_val(pgd_t);
-
-pte_t xen_make_pte(unsigned long);
-pmd_t xen_make_pmd(unsigned long);
-pgd_t xen_make_pgd(unsigned long);
-#endif
-
#endif /* _XEN_MMU_H */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 52b2e385698..41e217503c9 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -14,6 +14,7 @@
#include <linux/kernel_stat.h>
#include <linux/math64.h>
+#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -31,17 +32,6 @@
static cycle_t xen_clocksource_read(void);
-/* These are perodically updated in shared_info, and then copied here. */
-struct shadow_time_info {
- u64 tsc_timestamp; /* TSC at last update of time vals. */
- u64 system_timestamp; /* Time, in nanosecs, since boot. */
- u32 tsc_to_nsec_mul;
- int tsc_shift;
- u32 version;
-};
-
-static DEFINE_PER_CPU(struct shadow_time_info, shadow_time);
-
/* runstate info updated by Xen */
static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
@@ -211,7 +201,7 @@ unsigned long long xen_sched_clock(void)
unsigned long xen_cpu_khz(void)
{
u64 xen_khz = 1000000ULL << 32;
- const struct vcpu_time_info *info =
+ const struct pvclock_vcpu_time_info *info =
&HYPERVISOR_shared_info->vcpu_info[0].time;
do_div(xen_khz, info->tsc_to_system_mul);
@@ -223,121 +213,26 @@ unsigned long xen_cpu_khz(void)
return xen_khz;
}
-/*
- * Reads a consistent set of time-base values from Xen, into a shadow data
- * area.
- */
-static unsigned get_time_values_from_xen(void)
-{
- struct vcpu_time_info *src;
- struct shadow_time_info *dst;
-
- /* src is shared memory with the hypervisor, so we need to
- make sure we get a consistent snapshot, even in the face of
- being preempted. */
- src = &__get_cpu_var(xen_vcpu)->time;
- dst = &__get_cpu_var(shadow_time);
-
- do {
- dst->version = src->version;
- rmb(); /* fetch version before data */
- dst->tsc_timestamp = src->tsc_timestamp;
- dst->system_timestamp = src->system_time;
- dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
- dst->tsc_shift = src->tsc_shift;
- rmb(); /* test version after fetching data */
- } while ((src->version & 1) | (dst->version ^ src->version));
-
- return dst->version;
-}
-
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
-static u64 get_nsec_offset(struct shadow_time_info *shadow)
-{
- u64 now, delta;
- now = native_read_tsc();
- delta = now - shadow->tsc_timestamp;
- return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
-}
-
static cycle_t xen_clocksource_read(void)
{
- struct shadow_time_info *shadow = &get_cpu_var(shadow_time);
+ struct pvclock_vcpu_time_info *src;
cycle_t ret;
- unsigned version;
-
- do {
- version = get_time_values_from_xen();
- barrier();
- ret = shadow->system_timestamp + get_nsec_offset(shadow);
- barrier();
- } while (version != __get_cpu_var(xen_vcpu)->time.version);
-
- put_cpu_var(shadow_time);
+ src = &get_cpu_var(xen_vcpu)->time;
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(xen_vcpu);
return ret;
}
static void xen_read_wallclock(struct timespec *ts)
{
- const struct shared_info *s = HYPERVISOR_shared_info;
- u32 version;
- u64 delta;
- struct timespec now;
-
- /* get wallclock at system boot */
- do {
- version = s->wc_version;
- rmb(); /* fetch version before time */
- now.tv_sec = s->wc_sec;
- now.tv_nsec = s->wc_nsec;
- rmb(); /* fetch time before checking version */
- } while ((s->wc_version & 1) | (version ^ s->wc_version));
+ struct shared_info *s = HYPERVISOR_shared_info;
+ struct pvclock_wall_clock *wall_clock = &(s->wc);
+ struct pvclock_vcpu_time_info *vcpu_time;
- delta = xen_clocksource_read(); /* time since system boot */
- delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
-
- now.tv_nsec = do_div(delta, NSEC_PER_SEC);
- now.tv_sec = delta;
-
- set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+ vcpu_time = &get_cpu_var(xen_vcpu)->time;
+ pvclock_read_wallclock(wall_clock, vcpu_time, ts);
+ put_cpu_var(xen_vcpu);
}
unsigned long xen_get_wallclock(void)
@@ -345,7 +240,6 @@ unsigned long xen_get_wallclock(void)
struct timespec ts;
xen_read_wallclock(&ts);
-
return ts.tv_sec;
}
@@ -569,8 +463,6 @@ __init void xen_time_init(void)
{
int cpu = smp_processor_id();
- get_time_values_from_xen();
-
clocksource_register(&xen_clocksource);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 288d587ce73..6ec3b4f7719 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -17,7 +17,7 @@ ENTRY(startup_xen)
__FINIT
-.pushsection .bss.page_aligned
+.pushsection .text
.align PAGE_SIZE_asm
ENTRY(hypercall_page)
.skip 0x1000
@@ -30,11 +30,7 @@ ENTRY(hypercall_page)
ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen)
ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page)
ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb")
-#ifdef CONFIG_X86_PAE
ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes")
-#else
- ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no")
-#endif
ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic")
#endif /*CONFIG_XEN */
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 8c3946787db..743f33a01a0 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -831,6 +831,8 @@ static void as_completed_request(struct request_queue *q, struct request *rq)
}
if (ad->changed_batch && ad->nr_dispatched == 1) {
+ ad->current_batch_expires = jiffies +
+ ad->batch_expire[ad->batch_data_dir];
kblockd_schedule_work(&ad->antic_work);
ad->changed_batch = 0;
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 5b73f6a2cd8..831883b7d6c 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -233,6 +233,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
device = ac->device;
switch (event) {
+ default:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Unsupported event [0x%x]\n", event));
case ACPI_AC_NOTIFY_STATUS:
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
@@ -244,11 +247,6 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
- break;
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
- break;
}
return;
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index 26038c2a2a7..61b6c5beb2d 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -377,6 +377,9 @@ static int __init bay_init(void)
INIT_LIST_HEAD(&drive_bays);
+ if (acpi_disabled)
+ return -ENODEV;
+
/* look for dockable drive bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_bay, &bays, NULL);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 96c542f7fde..bb7c51f712b 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -917,6 +917,9 @@ static int __init dock_init(void)
dock_station = NULL;
+ if (acpi_disabled)
+ return 0;
+
/* look for a dock station */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock, &num, NULL);
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 2808dc60fd6..9b227d4dc9c 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -333,6 +333,9 @@ static int __init acpi_rtc_init(void)
{
struct device *dev = get_rtc_dev();
+ if (acpi_disabled)
+ return 0;
+
if (dev) {
rtc_wake_setup();
rtc_info.wake_on = rtc_wake_on;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 5e5dda3a302..d089c4519d4 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1713,7 +1713,8 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video,
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Cant attach device"));
continue;
}
}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9bf2986a278..ae8494944c4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -651,9 +651,17 @@ config PATA_WINBOND_VLB
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
+config HAVE_PATA_PLATFORM
+ bool
+ help
+ This is an internal configuration node for any machine that
+ uses pata-platform driver to enable the relevant driver in the
+ configuration structure without having to submit endless patches
+ to update the PATA_PLATFORM entry.
+
config PATA_PLATFORM
tristate "Generic platform device PATA support"
- depends on EMBEDDED || ARCH_RPC || PPC
+ depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 966ab401e52..6a4a2a25d97 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -90,6 +90,7 @@ enum {
board_ahci_mv = 4,
board_ahci_sb700 = 5,
board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ /* board_ahci_nopmp */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
@@ -653,6 +662,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
cap &= ~HOST_CAP_PMP;
}
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+ port_map != 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+ port_map, 1);
+ port_map = 1;
+ }
+
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 81b7ae37695..a90ae03f56b 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1043,6 +1043,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cc816ca623d..303fc0d2b97 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
@@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2e6e1622dc6..57a43649a46 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
- int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
unsigned int nbytes;
memset(qc->cdb, 0, dev->cdb_len);
@@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
- if (!using_pio && ata_check_atapi_dma(qc))
+ if (!nodata && !using_pio && atapi_check_dma(qc))
using_pio = 1;
/* Some controller variants snoop this value for Packet
@@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);
- if (using_pio || nodata) {
- /* no data, or PIO data xfer */
- if (nodata)
- qc->tf.protocol = ATAPI_PROT_NODATA;
- else
- qc->tf.protocol = ATAPI_PROT_PIO;
- } else {
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
/* DMA data xfer */
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4514283937e..1cf803adbc9 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3d39f9dfec5..41b4361bbf6 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -424,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 60391e9a84d..28092bc5014 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap)
goto out_port_free_dma_mem;
memset(pp->crpb, 0, MV_CRPB_Q_SZ);
+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
/*
* For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
* For later hardware, we need one unique sg_tbl per NCQ tag.
@@ -1592,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
if ((qc->tf.protocol != ATA_PROT_DMA) &&
(qc->tf.protocol != ATA_PROT_NCQ)) {
+ static int limit_warnings = 10;
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
/*
* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 99e6a406efb..81e14bea54b 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -99,8 +99,8 @@ struct agp_bridge_driver {
const void *aperture_sizes;
int num_aperture_sizes;
enum aper_size_type size_type;
- int cant_use_aperture;
- int needs_scratch_page;
+ bool cant_use_aperture;
+ bool needs_scratch_page;
const struct gatt_mask *masks;
int (*fetch_size)(void);
int (*configure)(void);
@@ -278,7 +278,7 @@ void agp_generic_destroy_page(void *addr, int flags);
void agp_free_key(int key);
int agp_num_entries(void);
u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command);
-void agp_device_command(u32 command, int agp_v3);
+void agp_device_command(u32 command, bool agp_v3);
int agp_3_5_enable(struct agp_bridge_data *bridge);
void global_cache_flush(void);
void get_agp_version(struct agp_bridge_data *bridge);
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index e77c17838c8..5da89f6c6c2 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -80,7 +80,7 @@ static void alpha_core_agp_enable(struct agp_bridge_data *bridge, u32 mode)
agp->mode.bits.enable = 1;
agp->ops->configure(agp);
- agp_device_command(agp->mode.lw, 0);
+ agp_device_command(agp->mode.lw, false);
}
static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start,
@@ -126,7 +126,7 @@ struct agp_bridge_driver alpha_core_agp_driver = {
.aperture_sizes = alpha_core_agp_sizes,
.num_aperture_sizes = 1,
.size_type = FIXED_APER_SIZE,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
.masks = NULL,
.fetch_size = alpha_core_agp_fetch_size,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 96bdb9296b0..39a0718bc61 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -314,9 +314,9 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d8200ac8f8c..13665db363d 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -90,9 +90,9 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 07b4d8ff56e..3a4566c0d84 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -287,10 +287,10 @@ static int ati_insert_memory(struct agp_memory * mem,
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
/*CACHE_FLUSH(); */
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index b1bdd015165..1ec87104e68 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -188,10 +188,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
err_out:
if (bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
if (got_gatt)
bridge->driver->free_gatt_table(bridge);
@@ -215,10 +215,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge)
if (bridge->driver->agp_destroy_page &&
bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
}
diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c
index 39275794fe6..58c57cb2518 100644
--- a/drivers/char/agp/compat_ioctl.c
+++ b/drivers/char/agp/compat_ioctl.c
@@ -214,7 +214,7 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE32)) {
ret_val = -EBUSY;
goto ioctl_out;
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index cac0009cebc..8ca6f262ef8 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -249,9 +249,9 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t
if (type != 0 || mem->type != 0)
return -EINVAL;
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
last_page = NULL;
@@ -329,7 +329,7 @@ static const struct agp_bridge_driver efficeon_driver = {
.free_gatt_table = efficeon_free_gatt_table,
.insert_memory = efficeon_insert_memory,
.remove_memory = efficeon_remove_memory,
- .cant_use_aperture = 0, // 1 might be faster?
+ .cant_use_aperture = false, // true might be faster?
// Generic
.alloc_by_type = agp_generic_alloc_by_type,
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 857b26227d8..e6cb1ab03e0 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -395,7 +395,7 @@ static int agp_remove_controller(struct agp_controller *controller)
if (agp_fe.current_controller == controller) {
agp_fe.current_controller = NULL;
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
}
kfree(controller);
@@ -443,7 +443,7 @@ static void agp_controller_release_current(struct agp_controller *controller,
}
agp_fe.current_controller = NULL;
- agp_fe.used_by_controller = FALSE;
+ agp_fe.used_by_controller = false;
agp_backend_release(agp_bridge);
}
@@ -573,7 +573,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma)
mutex_lock(&(agp_fe.agp_mutex));
- if (agp_fe.backend_acquired != TRUE)
+ if (agp_fe.backend_acquired != true)
goto out_eperm;
if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags)))
@@ -768,7 +768,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv)
atomic_inc(&agp_bridge->agp_in_use);
- agp_fe.backend_acquired = TRUE;
+ agp_fe.backend_acquired = true;
controller = agp_find_controller_by_pid(priv->my_pid);
@@ -778,7 +778,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv)
controller = agp_create_controller(priv->my_pid);
if (controller == NULL) {
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
return -ENOMEM;
}
@@ -981,7 +981,7 @@ static long agp_ioctl(struct file *file,
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE)) {
ret_val = -EBUSY;
goto ioctl_out;
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 7fc0c99a3a5..564daaa6c7d 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -96,13 +96,13 @@ EXPORT_SYMBOL(agp_flush_chipset);
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
mem->memory = NULL;
- mem->vmalloc_flag = 0;
+ mem->vmalloc_flag = false;
if (size <= 2*PAGE_SIZE)
mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
if (mem->memory == NULL) {
mem->memory = vmalloc(size);
- mem->vmalloc_flag = 1;
+ mem->vmalloc_flag = true;
}
}
EXPORT_SYMBOL(agp_alloc_page_array);
@@ -188,7 +188,7 @@ void agp_free_memory(struct agp_memory *curr)
if (curr == NULL)
return;
- if (curr->is_bound == TRUE)
+ if (curr->is_bound)
agp_unbind_memory(curr);
if (curr->type >= AGP_USER_TYPES) {
@@ -202,10 +202,13 @@ void agp_free_memory(struct agp_memory *curr)
}
if (curr->page_count != 0) {
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP);
+ curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_UNMAP);
}
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_FREE);
}
}
agp_free_key(curr->key);
@@ -411,20 +414,20 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound == TRUE) {
+ if (curr->is_bound) {
printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
return -EINVAL;
}
- if (curr->is_flushed == FALSE) {
+ if (!curr->is_flushed) {
curr->bridge->driver->cache_flush();
- curr->is_flushed = TRUE;
+ curr->is_flushed = true;
}
ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);
if (ret_val != 0)
return ret_val;
- curr->is_bound = TRUE;
+ curr->is_bound = true;
curr->pg_start = pg_start;
return 0;
}
@@ -446,7 +449,7 @@ int agp_unbind_memory(struct agp_memory *curr)
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound != TRUE) {
+ if (!curr->is_bound) {
printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
return -EINVAL;
}
@@ -456,7 +459,7 @@ int agp_unbind_memory(struct agp_memory *curr)
if (ret_val != 0)
return ret_val;
- curr->is_bound = FALSE;
+ curr->is_bound = false;
curr->pg_start = 0;
return 0;
}
@@ -754,7 +757,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode
EXPORT_SYMBOL(agp_collect_device_status);
-void agp_device_command(u32 bridge_agpstat, int agp_v3)
+void agp_device_command(u32 bridge_agpstat, bool agp_v3)
{
struct pci_dev *device = NULL;
int mode;
@@ -818,7 +821,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
/* If we have 3.5, we can do the isoch stuff. */
if (bridge->minor_version >= 5)
agp_3_5_enable(bridge);
- agp_device_command(bridge_agpstat, TRUE);
+ agp_device_command(bridge_agpstat, true);
return;
} else {
/* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
@@ -835,7 +838,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
}
/* AGP v<3 */
- agp_device_command(bridge_agpstat, FALSE);
+ agp_device_command(bridge_agpstat, false);
}
EXPORT_SYMBOL(agp_generic_enable);
@@ -1083,9 +1086,9 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index cbb0444467b..80d7317f85c 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -353,9 +353,9 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type)
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
@@ -437,7 +437,7 @@ const struct agp_bridge_driver hp_zx1_driver = {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index 76f581c85a7..e587eebebc6 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -580,7 +580,7 @@ const struct agp_bridge_driver intel_i460_driver = {
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __devinit agp_intel_i460_probe(struct pci_dev *pdev,
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index eeea50a1d22..df702642ab8 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -34,6 +34,12 @@
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
#define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42
+#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00
+#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02
+#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10
+#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12
+#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20
+#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22
/* cover 915 and 945 variants */
#define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
@@ -55,6 +61,10 @@
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB)
+#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB)
+
extern int agp_memory_reserved;
@@ -80,8 +90,13 @@ extern int agp_memory_reserved;
#define I915_PTEADDR 0x1C
#define I915_GMCH_GMS_STOLEN_48M (0x6 << 4)
#define I915_GMCH_GMS_STOLEN_64M (0x7 << 4)
-#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
-#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
+#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4)
+#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4)
+#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4)
+#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
+
#define I915_IFPADDR 0x60
/* Intel 965G registers */
@@ -325,7 +340,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start,
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -418,9 +433,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr)
if (curr->page_count == 4)
i8xx_destroy_pages(gart_to_virt(curr->memory[0]));
else {
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ void *va = gart_to_virt(curr->memory[0]);
+
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_UNMAP);
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_FREE);
}
agp_free_page_array(curr);
@@ -504,6 +521,10 @@ static void intel_i830_init_gtt_entries(void)
size = 512;
}
size += 4;
+ } else if (IS_G4X) {
+ /* On 4 series hardware, GTT stolen is separate from graphics
+ * stolen, ignore it in stolen gtt entries counting */
+ size = 0;
} else {
/* On previous hardware, the GTT size was just what was
* required to map the aperture.
@@ -552,30 +573,54 @@ static void intel_i830_init_gtt_entries(void)
break;
case I915_GMCH_GMS_STOLEN_48M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
break;
case I915_GMCH_GMS_STOLEN_64M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_128M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(128) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_256M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(256) - KB(size);
else
gtt_entries = 0;
break;
+ case INTEL_GMCH_GMS_STOLEN_96M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(96) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_160M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(160) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_224M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(224) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_352M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(352) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
default:
gtt_entries = 0;
break;
@@ -793,7 +838,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -903,7 +948,7 @@ static void intel_i9xx_setup_flush(void)
intel_private.ifp_resource.flags = IORESOURCE_MEM;
/* Setup chipset flush for 915 */
- if (IS_I965 || IS_G33) {
+ if (IS_I965 || IS_G33 || IS_G4X) {
intel_i965_g33_setup_chipset_flush();
} else {
intel_i915_setup_chipset_flush();
@@ -1020,7 +1065,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
@@ -1134,53 +1179,64 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
return addr | bridge->driver->masks[type].mask;
}
+static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
+{
+ switch (agp_bridge->dev->device) {
+ case PCI_DEVICE_ID_INTEL_IGD_HB:
+ case PCI_DEVICE_ID_INTEL_IGD_E_HB:
+ case PCI_DEVICE_ID_INTEL_Q45_HB:
+ case PCI_DEVICE_ID_INTEL_G45_HB:
+ *gtt_offset = *gtt_size = MB(2);
+ break;
+ default:
+ *gtt_offset = *gtt_size = KB(512);
+ }
+}
+
/* The intel i965 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge)
{
- int page_order;
- struct aper_size_info_fixed *size;
- int num_entries;
- u32 temp;
- int gtt_offset, gtt_size;
+ int page_order;
+ struct aper_size_info_fixed *size;
+ int num_entries;
+ u32 temp;
+ int gtt_offset, gtt_size;
- size = agp_bridge->current_size;
- page_order = size->page_order;
- num_entries = size->num_entries;
- agp_bridge->gatt_table_real = NULL;
+ size = agp_bridge->current_size;
+ page_order = size->page_order;
+ num_entries = size->num_entries;
+ agp_bridge->gatt_table_real = NULL;
- pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
+ pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
- temp &= 0xfff00000;
+ temp &= 0xfff00000;
- if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
- gtt_offset = gtt_size = MB(2);
- else
- gtt_offset = gtt_size = KB(512);
+ intel_i965_get_gtt_range(&gtt_offset, &gtt_size);
- intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
+ intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
- if (!intel_private.gtt)
- return -ENOMEM;
+ if (!intel_private.gtt)
+ return -ENOMEM;
- intel_private.registers = ioremap(temp, 128 * 4096);
- if (!intel_private.registers) {
+ intel_private.registers = ioremap(temp, 128 * 4096);
+ if (!intel_private.registers) {
iounmap(intel_private.gtt);
return -ENOMEM;
}
- temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
- global_cache_flush(); /* FIXME: ? */
+ temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
+ global_cache_flush(); /* FIXME: ? */
- /* we have to call this as early as possible after the MMIO base address is known */
- intel_i830_init_gtt_entries();
+ /* we have to call this as early as possible after the MMIO base address is known */
+ intel_i830_init_gtt_entries();
- agp_bridge->gatt_table = NULL;
+ agp_bridge->gatt_table = NULL;
- agp_bridge->gatt_bus_addr = temp;
+ agp_bridge->gatt_bus_addr = temp;
- return 0;
+ return 0;
}
@@ -1656,7 +1712,7 @@ static const struct agp_bridge_driver intel_810_driver = {
.aperture_sizes = intel_i810_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 2,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i810_configure,
.fetch_size = intel_i810_fetch_size,
.cleanup = intel_i810_cleanup,
@@ -1697,7 +1753,7 @@ static const struct agp_bridge_driver intel_815_driver = {
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = agp_generic_type_to_mask_type,
+ .agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
static const struct agp_bridge_driver intel_830_driver = {
@@ -1705,7 +1761,7 @@ static const struct agp_bridge_driver intel_830_driver = {
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i830_configure,
.fetch_size = intel_i830_fetch_size,
.cleanup = intel_i830_cleanup,
@@ -1876,7 +1932,7 @@ static const struct agp_bridge_driver intel_915_driver = {
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i915_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
@@ -1898,28 +1954,28 @@ static const struct agp_bridge_driver intel_915_driver = {
};
static const struct agp_bridge_driver intel_i965_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i965_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i965_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
@@ -1948,28 +2004,28 @@ static const struct agp_bridge_driver intel_7505_driver = {
};
static const struct agp_bridge_driver intel_g33_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i915_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i915_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
@@ -2063,6 +2119,12 @@ static const struct intel_driver_description {
NULL, &intel_g33_driver },
{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
"Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
+ "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
+ "Q45/Q43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0,
+ "G45/G43", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
@@ -2254,6 +2316,9 @@ static struct pci_device_id agp_intel_pci_table[] = {
ID(PCI_DEVICE_ID_INTEL_Q35_HB),
ID(PCI_DEVICE_ID_INTEL_Q33_HB),
ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+ ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
+ ID(PCI_DEVICE_ID_INTEL_Q45_HB),
+ ID(PCI_DEVICE_ID_INTEL_G45_HB),
{ }
};
diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c
index 225ed2a53d4..eaceb61ba2d 100644
--- a/drivers/char/agp/nvidia-agp.c
+++ b/drivers/char/agp/nvidia-agp.c
@@ -214,9 +214,9 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type
return -EBUSY;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
writel(agp_bridge->driver->mask_memory(agp_bridge,
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 2939e3570f9..8c42dcc5958 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -141,9 +141,9 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
@@ -226,7 +226,7 @@ static const struct agp_bridge_driver parisc_agp_driver = {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 98cf8abb3e5..b972d83bb1b 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -182,9 +182,9 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start,
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -264,8 +264,8 @@ const struct agp_bridge_driver sgi_tioca_driver = {
.agp_alloc_page = sgi_tioca_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 0,
+ .cant_use_aperture = true,
+ .needs_scratch_page = false,
.num_aperture_sizes = 1,
};
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index e08934e58f3..0e054c13449 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -339,9 +339,9 @@ static int serverworks_insert_memory(struct agp_memory *mem,
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -412,7 +412,7 @@ static void serverworks_agp_enable(struct agp_bridge_data *bridge, u32 mode)
bridge->capndx + PCI_AGP_COMMAND,
command);
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
static const struct agp_bridge_driver sworks_driver = {
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 42c0a600b1a..d2fa3cfca02 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -281,10 +281,10 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
if (uninorth_rev >= 0x30) {
/* This is an AGP V3 */
- agp_device_command(command, (status & AGPSTAT_MODE_3_0));
+ agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0);
} else {
/* AGP V2 */
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
uninorth_tlbflush(NULL);
@@ -511,7 +511,7 @@ const struct agp_bridge_driver uninorth_agp_driver = {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
const struct agp_bridge_driver u3_agp_driver = {
@@ -536,8 +536,8 @@ const struct agp_bridge_driver u3_agp_driver = {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 1,
+ .cant_use_aperture = true,
+ .needs_scratch_page = true,
};
static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 0ecc54d327b..7b36476dff4 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -389,11 +389,20 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
.device_id = PCI_DEVICE_ID_VIA_VT3324,
.chipset_name = "CX700",
},
- /* VT3336 */
+ /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
+ * architecture, the AGP resource and behavior are different from
+ * the traditional AGP which resides only in chipset. AGP is used
+ * by 3D driver which wasn't available for the VT3336 and VT3364
+ * generation until now. Unfortunately, by testing, VT3364 works
+ * but VT3336 doesn't. - explaination from via, just leave this as
+ * as a placeholder to avoid future patches adding it back in.
+ */
+#if 0
{
.device_id = PCI_DEVICE_ID_VIA_VT3336,
.chipset_name = "VT3336",
},
+#endif
/* P4M890 */
{
.device_id = PCI_DEVICE_ID_VIA_P4M890,
@@ -546,8 +555,8 @@ static const struct pci_device_id agp_via_pci_table[] = {
ID(PCI_DEVICE_ID_VIA_3296_0),
ID(PCI_DEVICE_ID_VIA_P4M800CE),
ID(PCI_DEVICE_ID_VIA_VT3324),
- ID(PCI_DEVICE_ID_VIA_VT3336),
ID(PCI_DEVICE_ID_VIA_P4M890),
+ ID(PCI_DEVICE_ID_VIA_VT3364),
{ }
};
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index b710426bab3..c533d0c9ec6 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
for (i = 0; i < pages; i++) {
if (!entry->busaddr[i])
break;
- pci_unmap_single(dev->pdev, entry->busaddr[i],
+ pci_unmap_page(dev->pdev, entry->busaddr[i],
PAGE_SIZE, PCI_DMA_TODEVICE);
}
@@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
for (i = 0; i < pages; i++) {
/* we need to support large memory configurations */
- entry->busaddr[i] = pci_map_single(dev->pdev,
- page_address(entry->
- pagelist[i]),
- PAGE_SIZE, PCI_DMA_TODEVICE);
+ entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
+ 0, PAGE_SIZE, PCI_DMA_TODEVICE);
if (entry->busaddr[i] == 0) {
DRM_ERROR("unable to map PCIGART pages!\n");
drm_ati_pcigart_cleanup(dev, gart_info);
diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h
index 3a05c6d5ebe..38d3c6b8276 100644
--- a/drivers/char/drm/drm.h
+++ b/drivers/char/drm/drm.h
@@ -628,7 +628,7 @@ struct drm_set_version {
#define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding)
#define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding)
-#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather)
#define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather)
#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank)
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index fc54140551a..564138714bb 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -470,17 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp,
if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) &&
(nr < DRM_COMMAND_BASE + dev->driver->num_ioctls))
ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
- else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE))
+ else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) {
ioctl = &drm_ioctls[nr];
- else
+ cmd = ioctl->cmd;
+ } else
goto err_i1;
+ /* Do not trust userspace, use our own definition */
func = ioctl->func;
/* is there a local override? */
if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl)
func = dev->driver->dma_ioctl;
-
if (!func) {
DRM_DEBUG("no function\n");
retcode = -EINVAL;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index a6a499f97e2..135bd19499f 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -103,20 +103,18 @@
{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
- {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
@@ -411,4 +409,7 @@
{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c
index e8f3d682e3b..93aed1c38bd 100644
--- a/drivers/char/drm/i915_drv.c
+++ b/drivers/char/drm/i915_drv.c
@@ -389,6 +389,7 @@ static int i915_resume(struct drm_device *dev)
pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
+ pci_set_master(dev->pdev);
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index 1b20f7c0639..d7326d92a23 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
(dev)->pci_device == 0x29A2 || \
(dev)->pci_device == 0x2A02 || \
(dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42)
+ (dev)->pci_device == 0x2A42 || \
+ (dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
+
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
(dev)->pci_device == 0x29B2 || \
(dev)->pci_device == 0x29D2)
@@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index f7f16e7a8bf..df036118b8b 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -62,11 +62,11 @@ static void i915_vblank_tasklet(struct drm_device *dev)
u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
RING_LOCALS;
- if (sarea_priv->front_tiled) {
+ if (IS_I965G(dev) && sarea_priv->front_tiled) {
cmd |= XY_SRC_COPY_BLT_DST_TILED;
dst_pitch >>= 2;
}
- if (sarea_priv->back_tiled) {
+ if (IS_I965G(dev) && sarea_priv->back_tiled) {
cmd |= XY_SRC_COPY_BLT_SRC_TILED;
src_pitch >>= 2;
}
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index f535812e405..702df45320f 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev)
ADD_RANGE(R300_RE_CULL_CNTL, 1);
ADD_RANGE(0x42C0, 2);
ADD_RANGE(R300_RS_CNTL_0, 2);
- ADD_RANGE(R300_RS_INTERP_0, 8);
- ADD_RANGE(R300_RS_ROUTE_0, 8);
- ADD_RANGE(0x43A4, 2);
+
+ ADD_RANGE(R300_SC_HYPERZ, 2);
ADD_RANGE(0x43E8, 1);
- ADD_RANGE(R300_PFS_CNTL_0, 3);
- ADD_RANGE(R300_PFS_NODE_0, 4);
- ADD_RANGE(R300_PFS_TEXI_0, 64);
+
ADD_RANGE(0x46A4, 5);
- ADD_RANGE(R300_PFS_INSTR0_0, 64);
- ADD_RANGE(R300_PFS_INSTR1_0, 64);
- ADD_RANGE(R300_PFS_INSTR2_0, 64);
- ADD_RANGE(R300_PFS_INSTR3_0, 64);
+
ADD_RANGE(R300_RE_FOG_STATE, 1);
ADD_RANGE(R300_FOG_COLOR_R, 3);
ADD_RANGE(R300_PP_ALPHA_TEST, 2);
@@ -215,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev)
ADD_RANGE(0x4E50, 9);
ADD_RANGE(0x4E88, 1);
ADD_RANGE(0x4EA0, 2);
- ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
- ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4);
- ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
- ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
- ADD_RANGE(0x4F28, 1);
- ADD_RANGE(0x4F30, 2);
- ADD_RANGE(0x4F44, 1);
- ADD_RANGE(0x4F54, 1);
+ ADD_RANGE(R300_ZB_CNTL, 3);
+ ADD_RANGE(R300_ZB_FORMAT, 4);
+ ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
+ ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+ ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+ ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
ADD_RANGE(R300_TX_FILTER_0, 16);
ADD_RANGE(R300_TX_FILTER1_0, 16);
@@ -235,13 +227,32 @@ void r300_init_reg_flags(struct drm_device *dev)
ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
/* Sporadic registers used as primitives are emitted */
- ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1);
+ ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
- ADD_RANGE(0x4074, 16);
+ ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+ ADD_RANGE(R500_US_CONFIG, 2);
+ ADD_RANGE(R500_US_CODE_ADDR, 3);
+ ADD_RANGE(R500_US_FC_CTRL, 1);
+ ADD_RANGE(R500_RS_IP_0, 16);
+ ADD_RANGE(R500_RS_INST_0, 16);
+ ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+ ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+ ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+ } else {
+ ADD_RANGE(R300_PFS_CNTL_0, 3);
+ ADD_RANGE(R300_PFS_NODE_0, 4);
+ ADD_RANGE(R300_PFS_TEXI_0, 64);
+ ADD_RANGE(R300_PFS_INSTR0_0, 64);
+ ADD_RANGE(R300_PFS_INSTR1_0, 64);
+ ADD_RANGE(R300_PFS_INSTR2_0, 64);
+ ADD_RANGE(R300_PFS_INSTR3_0, 64);
+ ADD_RANGE(R300_RS_INTERP_0, 8);
+ ADD_RANGE(R300_RS_ROUTE_0, 8);
+
}
}
@@ -707,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
BEGIN_RING(6);
OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
- OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03);
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+ OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+ R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
OUT_RING(0x0);
ADVANCE_RING();
@@ -829,6 +841,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv,
}
/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int sz;
+ int addr;
+ int type;
+ int clamp;
+ int stride;
+ RING_LOCALS;
+
+ sz = header.r500fp.count;
+ /* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+ addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+ type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+ clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+ addr |= (type << 16);
+ addr |= (clamp << 17);
+
+ stride = type ? 4 : 6;
+
+ DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+ if (!sz)
+ return 0;
+ if (sz * stride * 4 > cmdbuf->bufsz)
+ return -EINVAL;
+
+ BEGIN_RING(3 + sz * stride);
+ OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+ OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+ OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz * stride * 4;
+ cmdbuf->bufsz -= sz * stride * 4;
+
+ return 0;
+}
+
+
+/**
* Parses and validates a user-supplied command buffer and emits appropriate
* commands on the DMA ring buffer.
* Called by the ioctl handler function radeon_cp_cmdbuf.
@@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
}
break;
+ case R300_CMD_R500FP:
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ DRM_ERROR("Calling r500 command on r300 card\n");
+ ret = -EINVAL;
+ goto cleanup;
+ }
+ DRM_DEBUG("R300_CMD_R500FP\n");
+ ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_r500fp failed\n");
+ goto cleanup;
+ }
+ break;
default:
DRM_ERROR("bad cmd_type %i at %p\n",
header.header.cmd_type,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 8f664af9c4a..a6802f26afc 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11)
/* END: Rasterization / Interpolators - many guesses */
+/* Hierarchical Z Enable */
+#define R300_SC_HYPERZ 0x43a4
+# define R300_SC_HYPERZ_DISABLE (0 << 0)
+# define R300_SC_HYPERZ_ENABLE (1 << 0)
+# define R300_SC_HYPERZ_MIN (0 << 1)
+# define R300_SC_HYPERZ_MAX (1 << 1)
+# define R300_SC_HYPERZ_ADJ_256 (0 << 2)
+# define R300_SC_HYPERZ_ADJ_128 (1 << 2)
+# define R300_SC_HYPERZ_ADJ_64 (2 << 2)
+# define R300_SC_HYPERZ_ADJ_32 (3 << 2)
+# define R300_SC_HYPERZ_ADJ_16 (4 << 2)
+# define R300_SC_HYPERZ_ADJ_8 (5 << 2)
+# define R300_SC_HYPERZ_ADJ_4 (6 << 2)
+# define R300_SC_HYPERZ_ADJ_2 (7 << 2)
+# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
+# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6)
+
+#define R300_SC_EDGERULE 0x43a8
+
/* BEGIN: Scissors and cliprects */
/* There are four clipping rectangles. Their corner coordinates are inclusive.
@@ -1346,7 +1367,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
/* Guess by Vladimir.
* Set to 0A before 3D operations, set to 02 afterwards.
*/
-#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C
+/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/
# define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002
# define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A
@@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* for this.
* Bit (1<<8) is the "test" bit. so plain write is 6 - vd
*/
-#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00
-# define R300_RB3D_Z_DISABLED_1 0x00000010
-# define R300_RB3D_Z_DISABLED_2 0x00000014
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-# define R300_RB3D_STENCIL_ENABLE 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04
+#define R300_ZB_CNTL 0x4F00
+# define R300_STENCIL_ENABLE (1 << 0)
+# define R300_Z_ENABLE (1 << 1)
+# define R300_Z_WRITE_ENABLE (1 << 2)
+# define R300_Z_SIGNED_COMPARE (1 << 3)
+# define R300_STENCIL_FRONT_BACK (1 << 4)
+
+#define R300_ZB_ZSTENCILCNTL 0x4f04
/* functions */
# define R300_ZS_NEVER 0
# define R300_ZS_LESS 1
@@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_ZS_INVERT 5
# define R300_ZS_INCR_WRAP 6
# define R300_ZS_DECR_WRAP 7
+# define R300_Z_FUNC_SHIFT 0
/* front and back refer to operations done for front
and back faces, i.e. separate stencil function support */
-# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0
-# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3
-# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6
-# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9
-# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12
-# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15
-# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18
-# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21
-# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24
-
-#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08
-# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0
-# define R300_RB3D_ZS2_STENCIL_MASK 0xFF
-# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8
-# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16
+# define R300_S_FRONT_FUNC_SHIFT 3
+# define R300_S_FRONT_SFAIL_OP_SHIFT 6
+# define R300_S_FRONT_ZPASS_OP_SHIFT 9
+# define R300_S_FRONT_ZFAIL_OP_SHIFT 12
+# define R300_S_BACK_FUNC_SHIFT 15
+# define R300_S_BACK_SFAIL_OP_SHIFT 18
+# define R300_S_BACK_ZPASS_OP_SHIFT 21
+# define R300_S_BACK_ZFAIL_OP_SHIFT 24
+
+#define R300_ZB_STENCILREFMASK 0x4f08
+# define R300_STENCILREF_SHIFT 0
+# define R300_STENCILREF_MASK 0x000000ff
+# define R300_STENCILMASK_SHIFT 8
+# define R300_STENCILMASK_MASK 0x0000ff00
+# define R300_STENCILWRITEMASK_SHIFT 16
+# define R300_STENCILWRITEMASK_MASK 0x00ff0000
/* gap */
-#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10
-# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0)
-# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0)
- /* 16 bit format or some aditional bit ? */
-# define R300_DEPTH_FORMAT_UNK32 (32 << 0)
+#define R300_ZB_FORMAT 0x4f10
+# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0)
+# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0)
+# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0)
+/* reserved up to (15 << 0) */
+# define R300_INVERT_13E3_LEADING_ONES (0 << 4)
+# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
-#define R300_RB3D_EARLY_Z 0x4F14
-# define R300_EARLY_Z_DISABLE (0 << 0)
-# define R300_EARLY_Z_ENABLE (1 << 0)
+#define R300_ZB_ZTOP 0x4F14
+# define R300_ZTOP_DISABLE (0 << 0)
+# define R300_ZTOP_ENABLE (1 << 0)
/* gap */
-#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */
-# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1
-# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31)
+
+#define R300_ZB_BW_CNTL 0x4f1c
+# define R300_HIZ_DISABLE (0 << 0)
+# define R300_HIZ_ENABLE (1 << 0)
+# define R300_HIZ_MIN (0 << 1)
+# define R300_HIZ_MAX (1 << 1)
+# define R300_FAST_FILL_DISABLE (0 << 2)
+# define R300_FAST_FILL_ENABLE (1 << 2)
+# define R300_RD_COMP_DISABLE (0 << 3)
+# define R300_RD_COMP_ENABLE (1 << 3)
+# define R300_WR_COMP_DISABLE (0 << 4)
+# define R300_WR_COMP_ENABLE (1 << 4)
+# define R300_ZB_CB_CLEAR_RMW (0 << 5)
+# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
+
+# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7)
+# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7)
+# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8)
+# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8)
+
+# define R500_BMASK_ENABLE (0 << 10)
+# define R500_BMASK_DISABLE (1 << 10)
+# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11)
+# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11)
+# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12)
+# define R500_HIZ_FP_EXP_BITS_1 (1 << 12)
+# define R500_HIZ_FP_EXP_BITS_2 (2 << 12)
+# define R500_HIZ_FP_EXP_BITS_3 (3 << 12)
+# define R500_HIZ_FP_EXP_BITS_4 (4 << 12)
+# define R500_HIZ_FP_EXP_BITS_5 (5 << 12)
+# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15)
+# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17)
+# define R500_PEQ_PACKING_DISABLE (0 << 18)
+# define R500_PEQ_PACKING_ENABLE (1 << 18)
+# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18)
+# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18)
+
/* gap */
-#define R300_RB3D_DEPTHOFFSET 0x4F20
-#define R300_RB3D_DEPTHPITCH 0x4F24
-# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */
-# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */
-# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */
-# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */
+/* Z Buffer Address Offset.
+ * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
+ */
+#define R300_ZB_DEPTHOFFSET 0x4f20
+
+/* Z Buffer Pitch and Endian Control */
+#define R300_ZB_DEPTHPITCH 0x4f24
+# define R300_DEPTHPITCH_MASK 0x00003FFC
+# define R300_DEPTHMACROTILE_DISABLE (0 << 16)
+# define R300_DEPTHMACROTILE_ENABLE (1 << 16)
+# define R300_DEPTHMICROTILE_LINEAR (0 << 17)
+# define R300_DEPTHMICROTILE_TILED (1 << 17)
+# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
+# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
+# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
+# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+
+/* Z Buffer Clear Value */
+#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+#define R300_ZB_ZMASK_PITCH 0x4f34
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
+
+/* Hierarchical Z Memory Offset */
+#define R300_ZB_HIZ_OFFSET 0x4f44
+
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX 0x4f48
+
+/* Hierarchical Z Data */
+#define R300_ZB_HIZ_DWORD 0x4f4c
+
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX 0x4f50
+
+/* Hierarchical Z Pitch */
+#define R300_ZB_HIZ_PITCH 0x4f54
+
+/* Z Buffer Z Pass Counter Data */
+#define R300_ZB_ZPASS_DATA 0x4f58
+
+/* Z Buffer Z Pass Counter Address */
+#define R300_ZB_ZPASS_ADDR 0x4f5c
+
+/* Depth buffer X and Y coordinate offset */
+#define R300_ZB_DEPTHXY_OFFSET 0x4f60
+# define R300_DEPTHX_OFFSET_SHIFT 1
+# define R300_DEPTHX_OFFSET_MASK 0x000007FE
+# define R300_DEPTHY_OFFSET_SHIFT 17
+# define R300_DEPTHY_OFFSET_MASK 0x07FE0000
+
+/* Sets the fifo sizes */
+#define R500_ZB_FIFO_SIZE 0x4fd0
+# define R500_OP_FIFO_SIZE_FULL (0 << 0)
+# define R500_OP_FIFO_SIZE_HALF (1 << 0)
+# define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
+
+/* Stencil Reference Value and Mask for backfacing quads */
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF 0x4fd4
+# define R500_STENCILREF_SHIFT 0
+# define R500_STENCILREF_MASK 0x000000ff
+# define R500_STENCILMASK_SHIFT 8
+# define R500_STENCILMASK_MASK 0x0000ff00
+# define R500_STENCILWRITEMASK_SHIFT 16
+# define R500_STENCILWRITEMASK_MASK 0x00ff0000
/* BEGIN: Vertex program instruction set */
@@ -1623,4 +1753,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#define R300_CP_CMD_BITBLT_MULTI 0xC0009B00
+#define R500_VAP_INDEX_OFFSET 0x208c
+
+#define R500_GA_US_VECTOR_INDEX 0x4250
+#define R500_GA_US_VECTOR_DATA 0x4254
+
+#define R500_RS_IP_0 0x4074
+#define R500_RS_INST_0 0x4320
+
+#define R500_US_CONFIG 0x4600
+
+#define R500_US_FC_CTRL 0x4624
+#define R500_US_CODE_ADDR 0x4630
+
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0
+#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8
+
#endif /* _R300_REG_H */
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index f6f6c92bf77..e53158f0ecb 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -2,6 +2,7 @@
/*
* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2007 Advanced Micro Devices, Inc.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
@@ -34,789 +35,13 @@
#include "radeon_drv.h"
#include "r300_reg.h"
+#include "radeon_microcode.h"
+
#define RADEON_FIFO_DEBUG 0
static int radeon_do_cleanup_cp(struct drm_device * dev);
-/* CP microcode (from ATI) */
-static const u32 R200_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000ab, 0x00000004},
- {0x000000af, 0x00000004},
- {0x66544a49, 0000000000},
- {0x49494174, 0000000000},
- {0x54517d83, 0000000000},
- {0x498d8b64, 0000000000},
- {0x49494949, 0000000000},
- {0x49da493c, 0000000000},
- {0x49989898, 0000000000},
- {0xd34949d5, 0000000000},
- {0x9dc90e11, 0000000000},
- {0xce9b9b9b, 0000000000},
- {0x000f0000, 0x00000016},
- {0x352e232c, 0000000000},
- {0x00000013, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x352e272c, 0000000000},
- {0x000f0001, 0x00000016},
- {0x3239362f, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000016, 0x00000004},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000016, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802b, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002e, 0x00000018},
- {0x0000002e, 0x00000018},
- {0000000000, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603d, 0x00000004},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000046, 0x00000004},
- {0x00005000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504a, 0x00000004},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000051, 0x00000004},
- {0x01e655b4, 0x00000002},
- {0x4401b0dc, 0x00000002},
- {0x01c110dc, 0x00000002},
- {0x2666705d, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x0000005d, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000054, 0x00000004},
- {0x00401060, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x00800063, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x00000080, 0x00000018},
- {0x00000054, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x00600073, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007068, 0x00000004},
- {0x00005068, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600076, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000076, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600079, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000084, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000086, 0x00000004},
- {0x00600085, 0x00000004},
- {0x400070dd, 0000000000},
- {0x000380dd, 0x00000002},
- {0x00000093, 0x0000001c},
- {0x00065095, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01665000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x000671cc, 0x00000002},
- {0x0286f1cd, 0x00000002},
- {0x000000a3, 0x00000010},
- {0x21007000, 0000000000},
- {0x000000aa, 0x0000001c},
- {0x00065000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x000b0000, 0x00000002},
- {0x38067000, 0x00000002},
- {0x000a00a6, 0x00000004},
- {0x20007000, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380dd, 0x00000002},
- {0x000000bd, 0x0000001c},
- {0x00061096, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x00061095, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c0, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000c4, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000c6, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0x000025bb, 0x00000002},
- {0x000040c0, 0x00000004},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x00007999, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460299b, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x00005000, 0x00000002},
- {0x00038042, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380d9, 0x00000002},
- {0x04007394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 radeon_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000b4, 0x00000004},
- {0x000000b8, 0x00000004},
- {0x6f5b4d4c, 0000000000},
- {0x4c4c427f, 0000000000},
- {0x5b568a92, 0000000000},
- {0x4ca09c6d, 0000000000},
- {0xad4c4c4c, 0000000000},
- {0x4ce1af3d, 0000000000},
- {0xd8afafaf, 0000000000},
- {0xd64c4cdc, 0000000000},
- {0x4cd10d10, 0000000000},
- {0x000f0000, 0x00000016},
- {0x362f242d, 0000000000},
- {0x00000012, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x362f282d, 0000000000},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x000f0001, 0x00000016},
- {0x333a3730, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000017, 0x00000004},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000017, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802c, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x00000030, 0x00000018},
- {0x00000030, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603e, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000049, 0x00000004},
- {0x00005000, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504f, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000058, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x01e655b4, 0x00000002},
- {0x4401b0e4, 0x00000002},
- {0x01c110e4, 0x00000002},
- {0x26667066, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x00000066, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x0000005d, 0x00000004},
- {0x00401069, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x0080006c, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x0000008f, 0x00000018},
- {0x0000005b, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x0060007e, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007073, 0x00000004},
- {0x00005073, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600083, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000083, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600086, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000095, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000097, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00600096, 0x00000004},
- {0x400070e5, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000a8, 0x0000001c},
- {0x000650aa, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00007832, 0x00000002},
- {0x00005000, 0x00000002},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x00007820, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000c6, 0x0000001c},
- {0x000610ab, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x000610aa, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c9, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000cd, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000cf, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0000000000, 0000000000},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x6464614d, 0000000000},
- {0x69687420, 0000000000},
- {0x00000073, 0000000000},
- {0000000000, 0000000000},
- {0x00005000, 0x00000002},
- {0x000380d0, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380e0, 0x00000002},
- {0x04002394, 0x00000002},
- {0x00005000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0x00000008, 0000000000},
- {0x00000004, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 R300_cp_microcode[][2] = {
- {0x4200e000, 0000000000},
- {0x4000e000, 0000000000},
- {0x000000af, 0x00000008},
- {0x000000b3, 0x00000008},
- {0x6c5a504f, 0000000000},
- {0x4f4f497a, 0000000000},
- {0x5a578288, 0000000000},
- {0x4f91906a, 0000000000},
- {0x4f4f4f4f, 0000000000},
- {0x4fe24f44, 0000000000},
- {0x4f9c9c9c, 0000000000},
- {0xdc4f4fde, 0000000000},
- {0xa1cd4f4f, 0000000000},
- {0xd29d9d9d, 0000000000},
- {0x4f0f9fd7, 0000000000},
- {0x000ca000, 0x00000004},
- {0x000d0012, 0x00000038},
- {0x0000e8b4, 0x00000004},
- {0x000d0014, 0x00000038},
- {0x0000e8b6, 0x00000004},
- {0x000d0016, 0x00000038},
- {0x0000e854, 0x00000004},
- {0x000d0018, 0x00000038},
- {0x0000e855, 0x00000004},
- {0x000d001a, 0x00000038},
- {0x0000e856, 0x00000004},
- {0x000d001c, 0x00000038},
- {0x0000e857, 0x00000004},
- {0x000d001e, 0x00000038},
- {0x0000e824, 0x00000004},
- {0x000d0020, 0x00000038},
- {0x0000e825, 0x00000004},
- {0x000d0022, 0x00000038},
- {0x0000e830, 0x00000004},
- {0x000d0024, 0x00000038},
- {0x0000f0c0, 0x00000004},
- {0x000d0026, 0x00000038},
- {0x0000f0c1, 0x00000004},
- {0x000d0028, 0x00000038},
- {0x0000f041, 0x00000004},
- {0x000d002a, 0x00000038},
- {0x0000f184, 0x00000004},
- {0x000d002c, 0x00000038},
- {0x0000f185, 0x00000004},
- {0x000d002e, 0x00000038},
- {0x0000f186, 0x00000004},
- {0x000d0030, 0x00000038},
- {0x0000f187, 0x00000004},
- {0x000d0032, 0x00000038},
- {0x0000f180, 0x00000004},
- {0x000d0034, 0x00000038},
- {0x0000f393, 0x00000004},
- {0x000d0036, 0x00000038},
- {0x0000f38a, 0x00000004},
- {0x000d0038, 0x00000038},
- {0x0000f38e, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00000043, 0x00000018},
- {0x00cce800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x0000003a, 0x00000008},
- {0x0000a000, 0000000000},
- {0x02c0a000, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00130000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0xc980c045, 0x00000008},
- {0x2000451d, 0x00000004},
- {0x0000e580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x08004580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x0000004c, 0x00000008},
- {0x0000a000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x00032000, 0x00000004},
- {0x00022056, 0x00000028},
- {0x00000056, 0x00000024},
- {0x0800450f, 0x00000004},
- {0x0000a050, 0x00000008},
- {0x0000e565, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x00000057, 0x00000008},
- {0x03cca5b4, 0x00000004},
- {0x05432000, 0x00000004},
- {0x00022000, 0x00000004},
- {0x4ccce063, 0x00000030},
- {0x08274565, 0x00000004},
- {0x00000063, 0x00000030},
- {0x08004564, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x0000005a, 0x00000008},
- {0x00802066, 0x00000010},
- {0x00202000, 0x00000004},
- {0x001b00ff, 0x00000004},
- {0x01000069, 0x00000010},
- {0x001f2000, 0x00000004},
- {0x001c00ff, 0x00000004},
- {0000000000, 0x0000000c},
- {0x00000085, 0x00000030},
- {0x0000005a, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00012000, 0x00000004},
- {0x00082000, 0x00000004},
- {0x1800650e, 0x00000004},
- {0x00092000, 0x00000004},
- {0x000a2000, 0x00000004},
- {0x000f0000, 0x00000004},
- {0x00400000, 0x00000004},
- {0x00000079, 0x00000018},
- {0x0000e563, 0x00000004},
- {0x00c0e5f9, 0x000000c2},
- {0x0000006e, 0x00000008},
- {0x0000a06e, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x0000e577, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x0000e50f, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000007c, 0x00000018},
- {0x00c0e5f9, 0x000000c2},
- {0x0000007c, 0x00000008},
- {0x0014e50e, 0x00000004},
- {0x0040e50f, 0x00000004},
- {0x00c0007f, 0x00000008},
- {0x0000e570, 0x00000004},
- {0x0000e571, 0x00000004},
- {0x0000e572, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000e568, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00000089, 0x00000018},
- {0x000b0000, 0x00000004},
- {0x18c0e562, 0x00000004},
- {0x0000008b, 0x00000008},
- {0x00c0008a, 0x00000008},
- {0x000700e4, 0x00000004},
- {0x00000097, 0x00000038},
- {0x000ca099, 0x00000030},
- {0x080045bb, 0x00000004},
- {0x000c209a, 0x00000030},
- {0x0800e5bc, 0000000000},
- {0x0000e5bb, 0x00000004},
- {0x0000e5bc, 0000000000},
- {0x00120000, 0x0000000c},
- {0x00120000, 0x00000004},
- {0x001b0002, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0000e800, 0000000000},
- {0x0000e821, 0x00000004},
- {0x0000e82e, 0000000000},
- {0x02cca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000ce1cc, 0x00000004},
- {0x050de1cd, 0x00000004},
- {0x000000a7, 0x00000020},
- {0x4200e000, 0000000000},
- {0x000000ae, 0x00000038},
- {0x000ca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00160000, 0x00000004},
- {0x700ce000, 0x00000004},
- {0x001400aa, 0x00000008},
- {0x4000e000, 0000000000},
- {0x02400000, 0x00000004},
- {0x400ee000, 0x00000004},
- {0x02400000, 0x00000004},
- {0x4000e000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0240e51b, 0x00000004},
- {0x0080e50a, 0x00000005},
- {0x0080e50b, 0x00000005},
- {0x00220000, 0x00000004},
- {0x000700e4, 0x00000004},
- {0x000000c1, 0x00000038},
- {0x000c209a, 0x00000030},
- {0x0880e5bd, 0x00000005},
- {0x000c2099, 0x00000030},
- {0x0800e5bb, 0x00000005},
- {0x000c209a, 0x00000030},
- {0x0880e5bc, 0x00000005},
- {0x000000c4, 0x00000008},
- {0x0080e5bd, 0x00000005},
- {0x0000e5bb, 0x00000005},
- {0x0080e5bc, 0x00000005},
- {0x00210000, 0x00000004},
- {0x02800000, 0x00000004},
- {0x00c000c8, 0x00000018},
- {0x4180e000, 0x00000040},
- {0x000000ca, 0x00000024},
- {0x01000000, 0x0000000c},
- {0x0100e51d, 0x0000000c},
- {0x000045bb, 0x00000004},
- {0x000080c4, 0x00000008},
- {0x0000f3ce, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053cf, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f3d2, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053d3, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f39d, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c0539e, 0x00000040},
- {0x00008000, 0000000000},
- {0x03c00830, 0x00000004},
- {0x4200e000, 0000000000},
- {0x0000a000, 0x00000004},
- {0x200045e0, 0x00000004},
- {0x0000e5e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000700e1, 0x00000004},
- {0x0800e394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
u32 ret;
RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff));
@@ -825,21 +50,41 @@ static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
return ret;
}
+static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ u32 ret;
+ RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff);
+ ret = RADEON_READ(RS480_NB_MC_DATA);
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff);
+ return ret;
+}
+
static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
+ u32 ret;
RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK));
- return RADEON_READ(RS690_MC_DATA);
+ ret = RADEON_READ(RS690_MC_DATA);
+ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+ return ret;
+}
+
+static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ return RS690_READ_MCIND(dev_priv, addr);
+ else
+ return RS480_READ_MCIND(dev_priv, addr);
}
u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
else
return RADEON_READ(RADEON_MC_FB_LOCATION);
}
@@ -847,11 +92,11 @@ u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv)
static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
else
RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc);
}
@@ -859,15 +104,39 @@ static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc)
static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
else
RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc);
}
+static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base)
+{
+ u32 agp_base_hi = upper_32_bits(agp_base);
+ u32 agp_base_lo = agp_base & 0xffffffff;
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) {
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo);
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) {
+ R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ RADEON_WRITE(RS480_AGP_BASE_2, 0);
+ } else {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200)
+ RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi);
+ }
+}
+
static int RADEON_READ_PLL(struct drm_device * dev, int addr)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -882,15 +151,6 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr)
return RADEON_READ(RADEON_PCIE_DATA);
}
-static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr)
-{
- u32 ret;
- RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f);
- ret = RADEON_READ(RADEON_IGPGART_DATA);
- RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f);
- return ret;
-}
-
#if RADEON_FIFO_DEBUG
static void radeon_status(drm_radeon_private_t * dev_priv)
{
@@ -925,16 +185,36 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv)
dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
- tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
- tmp |= RADEON_RB3D_DC_FLUSH_ALL;
- RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {
+ tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
- for (i = 0; i < dev_priv->usec_timeout; i++) {
- if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
- & RADEON_RB3D_DC_BUSY)) {
- return 0;
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
+ }
+ } else {
+ /* 3D */
+ tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
+
+ /* 2D */
+ tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
+
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
}
- DRM_UDELAY(1);
}
#if RADEON_FIFO_DEBUG
@@ -991,6 +271,50 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv)
return -EBUSY;
}
+static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
+{
+ uint32_t gb_tile_config, gb_pipe_sel = 0;
+
+ /* RS4xx/RS6xx/R4xx/R5xx */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
+ gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
+ dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
+ } else {
+ /* R3xx */
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
+ dev_priv->num_gb_pipes = 2;
+ } else {
+ /* R3Vxx */
+ dev_priv->num_gb_pipes = 1;
+ }
+ }
+ DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes);
+
+ gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/);
+
+ switch (dev_priv->num_gb_pipes) {
+ case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break;
+ case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break;
+ case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break;
+ default:
+ case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break;
+ }
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
+ RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4));
+ RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1));
+ }
+ RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config);
+ radeon_do_wait_for_idle(dev_priv);
+ RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG);
+ RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) |
+ R300_DC_AUTOFLUSH_ENABLE |
+ R300_DC_DC_DISABLE_IGNORE_PE));
+
+
+}
+
/* ================================================================
* CP control, initialization
*/
@@ -1004,8 +328,22 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv)
radeon_do_wait_for_idle(dev_priv);
RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0);
-
- if (dev_priv->microcode_version == UCODE_R200) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) {
+ DRM_INFO("Loading R100 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R100_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R100_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) {
DRM_INFO("Loading R200 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
@@ -1013,7 +351,11 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv)
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R200_cp_microcode[i][0]);
}
- } else if (dev_priv->microcode_version == UCODE_R300) {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) {
DRM_INFO("Loading R300 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
@@ -1021,12 +363,35 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv)
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R300_cp_microcode[i][0]);
}
- } else {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) {
+ DRM_INFO("Loading R400 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
- radeon_cp_microcode[i][1]);
+ R420_cp_microcode[i][1]);
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
- radeon_cp_microcode[i][0]);
+ R420_cp_microcode[i][0]);
+ }
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ DRM_INFO("Loading RS690 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ RS690_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ RS690_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) {
+ DRM_INFO("Loading R500 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R520_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R520_cp_microcode[i][0]);
}
}
}
@@ -1121,12 +486,13 @@ static void radeon_do_cp_stop(drm_radeon_private_t * dev_priv)
static int radeon_do_engine_reset(struct drm_device * dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
- u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset;
+ u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset;
DRM_DEBUG("\n");
radeon_do_pixcache_flush(dev_priv);
- if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
+ /* may need something similar for newer chips */
clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX);
mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL);
@@ -1137,33 +503,39 @@ static int radeon_do_engine_reset(struct drm_device * dev)
RADEON_FORCEON_YCLKB |
RADEON_FORCEON_MC |
RADEON_FORCEON_AIC));
+ }
- rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
-
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
- RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
- ~(RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB)));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
-
+ rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
+
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
+ RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
+ ~(RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB)));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl);
RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index);
RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset);
}
+ /* setup the raster pipes */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300)
+ radeon_init_pipes(dev_priv);
+
/* Reset the CP ring */
radeon_do_cp_reset(dev_priv);
@@ -1194,7 +566,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev,
#if __OS_HAS_AGP
if (dev_priv->flags & RADEON_IS_AGP) {
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
+ radeon_write_agp_base(dev_priv, dev->agp->base);
+
radeon_write_agp_location(dev_priv,
(((dev_priv->gart_vm_start - 1 +
dev_priv->gart_size) & 0xffff0000) |
@@ -1339,102 +712,70 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv)
/* Enable or disable IGP GART on the chip */
static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on)
{
- u32 temp, tmp;
-
- tmp = RADEON_READ(RADEON_AIC_CNTL);
- if (on) {
- DRM_DEBUG("programming igpgart %08X %08lX %08X\n",
- dev_priv->gart_vm_start,
- (long)dev_priv->gart_info.bus_addr,
- dev_priv->gart_size);
-
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR,
- dev_priv->gart_info.bus_addr);
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp);
-
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start);
- dev_priv->gart_size = 32*1024*1024;
- radeon_write_agp_location(dev_priv,
- (((dev_priv->gart_vm_start - 1 +
- dev_priv->gart_size) & 0xffff0000) |
- (dev_priv->gart_vm_start >> 16)));
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp);
-
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1);
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0);
- }
-}
-
-/* Enable or disable RS690 GART on the chip */
-static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on)
-{
u32 temp;
if (on) {
- DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n",
+ DRM_DEBUG("programming igp gart %08X %08lX %08X\n",
dev_priv->gart_vm_start,
(long)dev_priv->gart_info.bus_addr,
dev_priv->gart_size);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL);
- RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN |
+ RS690_BLOCK_GFX_D3_EN));
+ else
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID);
- RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800);
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID);
+ IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN |
+ RS480_TLB_ENABLE |
+ RS480_GTW_LAC_EN |
+ RS480_1LEVEL_GART));
- RS690_WRITE_MCIND(RS690_MC_GART_BASE,
- dev_priv->gart_info.bus_addr);
+ temp = dev_priv->gart_info.bus_addr & 0xfffff000;
+ temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4;
+ IGP_WRITE_MCIND(RS480_GART_BASE, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL);
- RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL);
+ IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) |
+ RS480_REQ_TYPE_SNOOP_DIS));
- RS690_WRITE_MCIND(RS690_MC_AGP_BASE,
- (unsigned int)dev_priv->gart_vm_start);
+ radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start);
dev_priv->gart_size = 32*1024*1024;
temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) &
0xffff0000) | (dev_priv->gart_vm_start >> 16));
- RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp);
+ radeon_write_agp_location(dev_priv, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_CLEAR);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL,
+ RS480_GART_CACHE_INVALIDATE);
+
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_NO_CHANGE);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0);
} else {
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0);
}
}
@@ -1472,12 +813,8 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on)
{
u32 tmp;
- if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
- radeon_set_rs690gart(dev_priv, on);
- return;
- }
-
- if (dev_priv->flags & RADEON_IS_IGPGART) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) ||
+ (dev_priv->flags & RADEON_IS_IGPGART)) {
radeon_set_igpgart(dev_priv, on);
return;
}
@@ -1951,6 +1288,7 @@ static int radeon_do_resume_cp(struct drm_device * dev)
radeon_cp_init_ring_buffer(dev, dev_priv);
radeon_do_engine_reset(dev);
+ radeon_enable_interrupt(dev);
DRM_DEBUG("radeon_do_resume_cp() complete\n");
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index aab82e121e0..73ff51f1231 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -240,6 +240,7 @@ typedef union {
# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
#define R300_CMD_SCRATCH 8
+#define R300_CMD_R500FP 9
typedef union {
unsigned int u;
@@ -268,6 +269,9 @@ typedef union {
struct {
unsigned char cmd_type, reg, n_bufs, flags;
} scratch;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi_flags;
+ } r500fp;
} drm_r300_cmd_header_t;
#define RADEON_FRONT 0x1
@@ -278,6 +282,9 @@ typedef union {
#define RADEON_USE_HIERZ 0x40000000
#define RADEON_USE_COMP_ZBUF 0x20000000
+#define R500FP_CONSTANT_TYPE (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
/* Primitive types
*/
#define RADEON_POINTS 0x1
@@ -669,6 +676,7 @@ typedef struct drm_radeon_indirect {
#define RADEON_PARAM_CARD_TYPE 12
#define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
typedef struct drm_radeon_getparam {
int param;
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index 173ae620223..3f0eca957aa 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -38,7 +38,7 @@
#define DRIVER_NAME "radeon"
#define DRIVER_DESC "ATI Radeon"
-#define DRIVER_DATE "20060524"
+#define DRIVER_DATE "20080528"
/* Interface history:
*
@@ -98,9 +98,10 @@
* 1.26- Add support for variable size PCI(E) gart aperture
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
+ * 1.29- R500 3D cmd buffer support
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 28
+#define DRIVER_MINOR 29
#define DRIVER_PATCHLEVEL 0
/*
@@ -122,7 +123,7 @@ enum radeon_family {
CHIP_RV380,
CHIP_R420,
CHIP_RV410,
- CHIP_RS400,
+ CHIP_RS480,
CHIP_RS690,
CHIP_RV515,
CHIP_R520,
@@ -294,6 +295,7 @@ typedef struct drm_radeon_private {
int vblank_crtc;
uint32_t irq_enable_reg;
int irq_enabled;
+ uint32_t r500_disp_irq_reg;
struct radeon_surface surfaces[RADEON_MAX_SURFACES];
struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES];
@@ -307,6 +309,8 @@ typedef struct drm_radeon_private {
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
unsigned long fb_aper_offset;
+
+ int num_gb_pipes;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
@@ -382,6 +386,7 @@ extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS);
extern void radeon_driver_irq_preinstall(struct drm_device * dev);
extern void radeon_driver_irq_postinstall(struct drm_device * dev);
extern void radeon_driver_irq_uninstall(struct drm_device * dev);
+extern void radeon_enable_interrupt(struct drm_device *dev);
extern int radeon_vblank_crtc_get(struct drm_device *dev);
extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
@@ -444,13 +449,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
#define RADEON_PCIE_DATA 0x0034
#define RADEON_PCIE_TX_GART_CNTL 0x10
# define RADEON_PCIE_TX_GART_EN (1 << 0)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1)
-# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3)
-# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3)
-# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5)
-# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1)
+# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3)
+# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3)
+# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5)
+# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8)
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12
#define RADEON_PCIE_TX_GART_BASE 0x13
@@ -459,14 +464,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
#define RADEON_PCIE_TX_GART_END_LO 0x16
#define RADEON_PCIE_TX_GART_END_HI 0x17
-#define RADEON_IGPGART_INDEX 0x168
-#define RADEON_IGPGART_DATA 0x16c
-#define RADEON_IGPGART_UNK_18 0x18
-#define RADEON_IGPGART_CTRL 0x2b
-#define RADEON_IGPGART_BASE_ADDR 0x2c
-#define RADEON_IGPGART_FLUSH 0x2e
-#define RADEON_IGPGART_ENABLE 0x38
-#define RADEON_IGPGART_UNK_39 0x39
+#define RS480_NB_MC_INDEX 0x168
+# define RS480_NB_MC_IND_WR_EN (1 << 8)
+#define RS480_NB_MC_DATA 0x16c
#define RS690_MC_INDEX 0x78
# define RS690_MC_INDEX_MASK 0x1ff
@@ -474,45 +474,91 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
# define RS690_MC_INDEX_WR_ACK 0x7f
#define RS690_MC_DATA 0x7c
-#define RS690_MC_MISC_CNTL 0x18
-#define RS690_MC_GART_FEATURE_ID 0x2b
-#define RS690_MC_GART_BASE 0x2c
-#define RS690_MC_GART_CACHE_CNTL 0x2e
-# define RS690_MC_GART_CC_NO_CHANGE 0x0
-# define RS690_MC_GART_CC_CLEAR 0x1
-# define RS690_MC_GART_CLEAR_STATUS (1 << 1)
-# define RS690_MC_GART_CLEAR_DONE (0 << 1)
-# define RS690_MC_GART_CLEAR_PENDING (1 << 1)
-#define RS690_MC_AGP_SIZE 0x38
-# define RS690_MC_GART_DIS 0x0
-# define RS690_MC_GART_EN 0x1
-# define RS690_MC_AGP_SIZE_32MB (0 << 1)
-# define RS690_MC_AGP_SIZE_64MB (1 << 1)
-# define RS690_MC_AGP_SIZE_128MB (2 << 1)
-# define RS690_MC_AGP_SIZE_256MB (3 << 1)
-# define RS690_MC_AGP_SIZE_512MB (4 << 1)
-# define RS690_MC_AGP_SIZE_1GB (5 << 1)
-# define RS690_MC_AGP_SIZE_2GB (6 << 1)
-#define RS690_MC_AGP_MODE_CONTROL 0x39
+/* MC indirect registers */
+#define RS480_MC_MISC_CNTL 0x18
+# define RS480_DISABLE_GTW (1 << 1)
+/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */
+# define RS480_GART_INDEX_REG_EN (1 << 12)
+# define RS690_BLOCK_GFX_D3_EN (1 << 14)
+#define RS480_K8_FB_LOCATION 0x1e
+#define RS480_GART_FEATURE_ID 0x2b
+# define RS480_HANG_EN (1 << 11)
+# define RS480_TLB_ENABLE (1 << 18)
+# define RS480_P2P_ENABLE (1 << 19)
+# define RS480_GTW_LAC_EN (1 << 25)
+# define RS480_2LEVEL_GART (0 << 30)
+# define RS480_1LEVEL_GART (1 << 30)
+# define RS480_PDC_EN (1 << 31)
+#define RS480_GART_BASE 0x2c
+#define RS480_GART_CACHE_CNTRL 0x2e
+# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */
+#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38
+# define RS480_GART_EN (1 << 0)
+# define RS480_VA_SIZE_32MB (0 << 1)
+# define RS480_VA_SIZE_64MB (1 << 1)
+# define RS480_VA_SIZE_128MB (2 << 1)
+# define RS480_VA_SIZE_256MB (3 << 1)
+# define RS480_VA_SIZE_512MB (4 << 1)
+# define RS480_VA_SIZE_1GB (5 << 1)
+# define RS480_VA_SIZE_2GB (6 << 1)
+#define RS480_AGP_MODE_CNTL 0x39
+# define RS480_POST_GART_Q_SIZE (1 << 18)
+# define RS480_NONGART_SNOOP (1 << 19)
+# define RS480_AGP_RD_BUF_SIZE (1 << 20)
+# define RS480_REQ_TYPE_SNOOP_SHIFT 22
+# define RS480_REQ_TYPE_SNOOP_MASK 0x3
+# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24)
+#define RS480_MC_MISC_UMA_CNTL 0x5f
+#define RS480_MC_MCLK_CNTL 0x7a
+#define RS480_MC_UMA_DUALCH_CNTL 0x86
+
#define RS690_MC_FB_LOCATION 0x100
#define RS690_MC_AGP_LOCATION 0x101
#define RS690_MC_AGP_BASE 0x102
+#define RS690_MC_AGP_BASE_2 0x103
#define R520_MC_IND_INDEX 0x70
-#define R520_MC_IND_WR_EN (1<<24)
+#define R520_MC_IND_WR_EN (1 << 24)
#define R520_MC_IND_DATA 0x74
#define RV515_MC_FB_LOCATION 0x01
#define RV515_MC_AGP_LOCATION 0x02
+#define RV515_MC_AGP_BASE 0x03
+#define RV515_MC_AGP_BASE_2 0x04
#define R520_MC_FB_LOCATION 0x04
#define R520_MC_AGP_LOCATION 0x05
+#define R520_MC_AGP_BASE 0x06
+#define R520_MC_AGP_BASE_2 0x07
#define RADEON_MPP_TB_CONFIG 0x01c0
#define RADEON_MEM_CNTL 0x0140
#define RADEON_MEM_SDRAM_MODE_REG 0x0158
+#define RADEON_AGP_BASE_2 0x015c /* r200+ only */
+#define RS480_AGP_BASE_2 0x0164
#define RADEON_AGP_BASE 0x0170
+/* pipe config regs */
+#define R400_GB_PIPE_SELECT 0x402c
+#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
+#define R500_SU_REG_DEST 0x42c8
+#define R300_GB_TILE_CONFIG 0x4018
+# define R300_ENABLE_TILING (1 << 0)
+# define R300_PIPE_COUNT_RV350 (0 << 1)
+# define R300_PIPE_COUNT_R300 (3 << 1)
+# define R300_PIPE_COUNT_R420_3P (6 << 1)
+# define R300_PIPE_COUNT_R420 (7 << 1)
+# define R300_TILE_SIZE_8 (0 << 4)
+# define R300_TILE_SIZE_16 (1 << 4)
+# define R300_TILE_SIZE_32 (2 << 4)
+# define R300_SUBPIXEL_1_12 (0 << 16)
+# define R300_SUBPIXEL_1_16 (1 << 16)
+#define R300_DST_PIPE_CONFIG 0x170c
+# define R300_PIPE_AUTO_CONFIG (1 << 31)
+#define R300_RB2D_DSTCACHE_MODE 0x3428
+# define R300_DC_AUTOFLUSH_ENABLE (1 << 8)
+# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17)
+
#define RADEON_RB3D_COLOROFFSET 0x1c40
#define RADEON_RB3D_COLORPITCH 0x1c48
@@ -616,11 +662,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
#define RADEON_PP_TXFILTER_1 0x1c6c
#define RADEON_PP_TXFILTER_2 0x1c84
-#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c
-# define RADEON_RB2D_DC_FLUSH (3 << 0)
-# define RADEON_RB2D_DC_FREE (3 << 2)
-# define RADEON_RB2D_DC_FLUSH_ALL 0xf
-# define RADEON_RB2D_DC_BUSY (1 << 31)
+#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */
+#define R300_DSTCACHE_CTLSTAT 0x1714
+# define R300_RB2D_DC_FLUSH (3 << 0)
+# define R300_RB2D_DC_FREE (3 << 2)
+# define R300_RB2D_DC_FLUSH_ALL 0xf
+# define R300_RB2D_DC_BUSY (1 << 31)
#define RADEON_RB3D_CNTL 0x1c3c
# define RADEON_ALPHA_BLEND_ENABLE (1 << 0)
# define RADEON_PLANE_MASK_ENABLE (1 << 1)
@@ -643,11 +690,18 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
# define RADEON_RB3D_ZC_FREE (1 << 2)
# define RADEON_RB3D_ZC_FLUSH_ALL 0x5
# define RADEON_RB3D_ZC_BUSY (1 << 31)
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZC_FLUSH (1 << 0)
+# define R300_ZC_FREE (1 << 1)
+# define R300_ZC_FLUSH_ALL 0x3
+# define R300_ZC_BUSY (1 << 31)
#define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c
# define RADEON_RB3D_DC_FLUSH (3 << 0)
# define RADEON_RB3D_DC_FREE (3 << 2)
# define RADEON_RB3D_DC_FLUSH_ALL 0xf
# define RADEON_RB3D_DC_BUSY (1 << 31)
+#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c
+# define R300_RB3D_DC_FINISH (1 << 4)
#define RADEON_RB3D_ZSTENCILCNTL 0x1c2c
# define RADEON_Z_TEST_MASK (7 << 4)
# define RADEON_Z_TEST_ALWAYS (7 << 4)
@@ -1057,6 +1111,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
#define R200_VAP_PVS_CNTL_1 0x22D0
+#define R500_D1CRTC_STATUS 0x609c
+#define R500_D2CRTC_STATUS 0x689c
+#define R500_CRTC_V_BLANK (1<<0)
+
+#define R500_D1CRTC_FRAME_COUNT 0x60a4
+#define R500_D2CRTC_FRAME_COUNT 0x68a4
+
+#define R500_D1MODE_V_COUNTER 0x6530
+#define R500_D2MODE_V_COUNTER 0x6d30
+
+#define R500_D1MODE_VBLANK_STATUS 0x6534
+#define R500_D2MODE_VBLANK_STATUS 0x6d34
+#define R500_VBLANK_OCCURED (1<<0)
+#define R500_VBLANK_ACK (1<<4)
+#define R500_VBLANK_STAT (1<<12)
+#define R500_VBLANK_INT (1<<16)
+
+#define R500_DxMODE_INT_MASK 0x6540
+#define R500_D1MODE_INT_MASK (1<<0)
+#define R500_D2MODE_INT_MASK (1<<8)
+
+#define R500_DISP_INTERRUPT_STATUS 0x7edc
+#define R500_D1_VBLANK_INTERRUPT (1 << 4)
+#define R500_D2_VBLANK_INTERRUPT (1 << 5)
+
/* Constants */
#define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */
@@ -1078,42 +1157,50 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
#define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) )
#define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) )
-#define RADEON_WRITE_PLL( addr, val ) \
+#define RADEON_WRITE_PLL(addr, val) \
do { \
- RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \
+ RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \
((addr) & 0x1f) | RADEON_PLL_WR_EN ); \
- RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \
+ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_IGPGART( addr, val ) \
+#define RADEON_WRITE_PCIE(addr, val) \
do { \
- RADEON_WRITE( RADEON_IGPGART_INDEX, \
- ((addr) & 0x7f) | (1 << 8)); \
- RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \
- RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \
+ RADEON_WRITE8(RADEON_PCIE_INDEX, \
+ ((addr) & 0xff)); \
+ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_PCIE( addr, val ) \
-do { \
- RADEON_WRITE8( RADEON_PCIE_INDEX, \
- ((addr) & 0xff)); \
- RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \
+#define R500_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
+ RADEON_WRITE(R520_MC_IND_DATA, (val)); \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0); \
} while (0)
-#define RADEON_WRITE_MCIND( addr, val ) \
- do { \
- RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
- RADEON_WRITE(R520_MC_IND_DATA, (val)); \
- RADEON_WRITE(R520_MC_IND_INDEX, 0); \
- } while (0)
+#define RS480_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(RS480_NB_MC_INDEX, \
+ ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \
+ RADEON_WRITE(RS480_NB_MC_DATA, (val)); \
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \
+} while (0)
-#define RS690_WRITE_MCIND( addr, val ) \
+#define RS690_WRITE_MCIND(addr, val) \
do { \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \
RADEON_WRITE(RS690_MC_DATA, val); \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \
} while (0)
+#define IGP_WRITE_MCIND(addr, val) \
+do { \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \
+ RS690_WRITE_MCIND(addr, val); \
+ else \
+ RS480_WRITE_MCIND(addr, val); \
+} while (0)
+
#define CP_PACKET0( reg, n ) \
(RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2))
#define CP_PACKET0_TABLE( reg, n ) \
@@ -1154,23 +1241,43 @@ do { \
} while (0)
#define RADEON_FLUSH_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } \
} while (0)
#define RADEON_FLUSH_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH_ALL); \
+ } \
} while (0)
/* ================================================================
diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c
index 009af3814b6..ee40d197deb 100644
--- a/drivers/char/drm/radeon_irq.c
+++ b/drivers/char/drm/radeon_irq.c
@@ -234,7 +234,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr
return radeon_wait_irq(dev, irqwait->irq_seq);
}
-static void radeon_enable_interrupt(struct drm_device *dev)
+void radeon_enable_interrupt(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
diff --git a/drivers/char/drm/radeon_microcode.h b/drivers/char/drm/radeon_microcode.h
new file mode 100644
index 00000000000..a348c9e7db1
--- /dev/null
+++ b/drivers/char/drm/radeon_microcode.h
@@ -0,0 +1,1844 @@
+/*
+ * Copyright 2007 Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef RADEON_MICROCODE_H
+#define RADEON_MICROCODE_H
+
+/* production radeon ucode r1xx-r6xx */
+static const u32 R100_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000b4, 0x00000004 },
+ { 0x000000b8, 0x00000004 },
+ { 0x6f5b4d4c, 0000000000 },
+ { 0x4c4c427f, 0000000000 },
+ { 0x5b568a92, 0000000000 },
+ { 0x4ca09c6d, 0000000000 },
+ { 0xad4c4c4c, 0000000000 },
+ { 0x4ce1af3d, 0000000000 },
+ { 0xd8afafaf, 0000000000 },
+ { 0xd64c4cdc, 0000000000 },
+ { 0x4cd10d10, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f242d, 0000000000 },
+ { 0x00000012, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f282d, 0000000000 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x000f0001, 0x00000016 },
+ { 0x333a3730, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000017, 0x00000004 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000017, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000030, 0x00000018 },
+ { 0x00000030, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c0603e, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x00000049, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011055, 0x00000014 },
+ { 0x00000055, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000504f, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000058, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0e4, 0x00000002 },
+ { 0x01c110e4, 0x00000002 },
+ { 0x26667066, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000066, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x0000005d, 0x00000004 },
+ { 0x00401069, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x0080006c, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x0000008f, 0x00000018 },
+ { 0x0000005b, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x0060007e, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x20007073, 0x00000004 },
+ { 0x00005073, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00600083, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x00000083, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x00600086, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000095, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x00000097, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00600096, 0x00000004 },
+ { 0x400070e5, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000a8, 0x0000001c },
+ { 0x000650aa, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00007832, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x00007820, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000c6, 0x0000001c },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000c9, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000cd, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000cf, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0000000000, 0000000000 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x6464614d, 0000000000 },
+ { 0x69687420, 0000000000 },
+ { 0x00000073, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380d0, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380e0, 0x00000002 },
+ { 0x04002394, 0x00000002 },
+ { 0x00005000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00000008, 0000000000 },
+ { 0x00000004, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R200_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000bf, 0x00000004 },
+ { 0x000000c3, 0x00000004 },
+ { 0x7a685e5d, 0000000000 },
+ { 0x5d5d5588, 0000000000 },
+ { 0x68659197, 0000000000 },
+ { 0x5da19f78, 0000000000 },
+ { 0x5d5d5d5d, 0000000000 },
+ { 0x5dee5d50, 0000000000 },
+ { 0xf2acacac, 0000000000 },
+ { 0xe75df9e9, 0000000000 },
+ { 0xb1dd0e11, 0000000000 },
+ { 0xe2afafaf, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f232d, 0000000000 },
+ { 0x00000013, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f272d, 0000000000 },
+ { 0x000f0001, 0x00000016 },
+ { 0x3e4d4a37, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000016, 0x00000004 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000016, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x07f007f0, 0000000000 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802b, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000037, 0x00000018 },
+ { 0x00000037, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c06051, 0x00000004 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x0000005a, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011064, 0x00000014 },
+ { 0x00000064, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000505e, 0x00000004 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000065, 0x00000004 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0f0, 0x00000002 },
+ { 0x01c110f0, 0x00000002 },
+ { 0x26667071, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000071, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000068, 0x00000004 },
+ { 0x00401074, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x00800077, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x00000094, 0x00000018 },
+ { 0x00000068, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x00600087, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x2000707c, 0x00000004 },
+ { 0x0000507c, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x0060008a, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x0000008a, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x0060008d, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000098, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x0000009a, 0x00000004 },
+ { 0x00600099, 0x00000004 },
+ { 0x400070f1, 0000000000 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000a7, 0x0000001c },
+ { 0x000650a9, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01665000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x000671cc, 0x00000002 },
+ { 0x0286f1cd, 0x00000002 },
+ { 0x000000b7, 0x00000010 },
+ { 0x21007000, 0000000000 },
+ { 0x000000be, 0x0000001c },
+ { 0x00065000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x000b0000, 0x00000002 },
+ { 0x38067000, 0x00000002 },
+ { 0x000a00ba, 0x00000004 },
+ { 0x20007000, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000d1, 0x0000001c },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610a9, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000d4, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000d8, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000da, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0x000025bb, 0x00000002 },
+ { 0x000040d4, 0x00000004 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x00007999, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460299b, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x00038056, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380ed, 0x00000002 },
+ { 0x04007394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000078c4, 0x00000002 },
+ { 0x000078c5, 0x00000002 },
+ { 0x000078c6, 0x00000002 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f2, 0x00000004 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f9, 0x00000004 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R300_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000ae, 0x00000008 },
+ { 0x000000b2, 0x00000008 },
+ { 0x67554b4a, 0000000000 },
+ { 0x4a4a4475, 0000000000 },
+ { 0x55527d83, 0000000000 },
+ { 0x4a8c8b65, 0000000000 },
+ { 0x4aef4af6, 0000000000 },
+ { 0x4ae14a4a, 0000000000 },
+ { 0xe4979797, 0000000000 },
+ { 0xdb4aebdd, 0000000000 },
+ { 0x9ccc4a4a, 0000000000 },
+ { 0xd1989898, 0000000000 },
+ { 0x4a0f9ad6, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000080, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00012000, 0x00000004 },
+ { 0x00082000, 0x00000004 },
+ { 0x1800650e, 0x00000004 },
+ { 0x00092000, 0x00000004 },
+ { 0x000a2000, 0x00000004 },
+ { 0x000f0000, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000074, 0x00000018 },
+ { 0x0000e563, 0x00000004 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0000a069, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000077, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000077, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0007a, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000084, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000086, 0x00000008 },
+ { 0x00c00085, 0x00000008 },
+ { 0x000700e3, 0x00000004 },
+ { 0x00000092, 0x00000038 },
+ { 0x000ca094, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x000000a4, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x000000a1, 0x00000008 },
+ { 0x000000a6, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000ad, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x001400a9, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700e3, 0x00000004 },
+ { 0x000000c0, 0x00000038 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2094, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000c3, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000c7, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c9, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080c3, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700e0, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000eb, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000f3, 0x00000034 },
+ { 0x000000f0, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R420_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xd9d3dff6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04a4a, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000d7, 0x00000034 },
+ { 0x000000d4, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000da, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS600_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ae74af6, 0000000000 },
+ { 0x4ad34a4a, 0000000000 },
+ { 0xd6898989, 0000000000 },
+ { 0xcd4addcf, 0000000000 },
+ { 0x8ebe4ae2, 0000000000 },
+ { 0xc38a8a8a, 0000000000 },
+ { 0x4a0f8cc8, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700d5, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700d5, 0x00000004 },
+ { 0x000000b2, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000b5, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000b9, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000bb, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080b5, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700d2, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d6, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000dd, 0x00000008 },
+ { 0x00e00116, 0000000000 },
+ { 0x000700e1, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x200050e7, 0x00000004 },
+ { 0x0000e01d, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000eb, 0x00000034 },
+ { 0x000000e8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS690_cp_microcode[][2] = {
+ { 0x000000dd, 0x00000008 },
+ { 0x000000df, 0x00000008 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ad74af6, 0000000000 },
+ { 0x4ac94a4a, 0000000000 },
+ { 0xcc898989, 0000000000 },
+ { 0xc34ad3c5, 0000000000 },
+ { 0x8e4a4a4a, 0000000000 },
+ { 0x4a8a8a8a, 0000000000 },
+ { 0x4a0f8c4a, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700cb, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x00100000, 0x0000002c },
+ { 0x00004000, 0000000000 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700cb, 0x00000004 },
+ { 0x000000b7, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000ba, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000be, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c0, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080ba, 0x00000008 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c8, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cc, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d3, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000db, 0x00000034 },
+ { 0x000000d8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4000e000, 0000000000 },
+ { 0x0025001b, 0x00000004 },
+ { 0x00230000, 0x00000004 },
+ { 0x00250005, 0x00000004 },
+ { 0x000000e6, 0x00000034 },
+ { 0000000000, 0x0000000c },
+ { 0x00244000, 0x00000004 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x0000000c },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R520_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xe0dae6f6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04ad5, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0xdeadbeef, 0000000000 },
+ { 0x00000116, 0000000000 },
+ { 0x000700d3, 0x00000004 },
+ { 0x080050e7, 0x00000004 },
+ { 0x000700d4, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x0000e01d, 0000000000 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000db, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000e5, 0x00000034 },
+ { 0x000000e1, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+
+#endif
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 6f75512f591..11c146b4921 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -1662,7 +1662,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
u32 height;
int i;
u32 texpitch, microtile;
- u32 offset;
+ u32 offset, byte_offset;
RING_LOCALS;
if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) {
@@ -1727,6 +1727,13 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
} else
microtile = 0;
+ /* this might fail for zero-sized uploads - are those illegal? */
+ if (!radeon_check_offset(dev_priv, tex->offset + image->height *
+ blit_width - 1)) {
+ DRM_ERROR("Invalid final destination offset\n");
+ return -EINVAL;
+ }
+
DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width);
do {
@@ -1840,6 +1847,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
}
#undef RADEON_COPY_MT
+ byte_offset = (image->y & ~2047) * blit_width;
buf->file_priv = file_priv;
buf->used = size;
offset = dev_priv->gart_buffers_offset + buf->offset;
@@ -1854,9 +1862,9 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
RADEON_DP_SRC_SOURCE_MEMORY |
RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS);
OUT_RING((spitch << 22) | (offset >> 10));
- OUT_RING((texpitch << 22) | (tex->offset >> 10));
+ OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10)));
OUT_RING(0);
- OUT_RING((image->x << 16) | image->y);
+ OUT_RING((image->x << 16) | (image->y % 2048));
OUT_RING((image->width << 16) | height);
RADEON_WAIT_UNTIL_2D_IDLE();
ADVANCE_RING();
@@ -3037,6 +3045,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil
case RADEON_PARAM_FB_LOCATION:
value = radeon_read_fb_location(dev_priv);
break;
+ case RADEON_PARAM_NUM_GB_PIPES:
+ value = dev_priv->num_gb_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e94bee03231..750131010af 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3322,7 +3322,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
msleep_interruptible(duration);
tty->ops->break_ctl(tty, 0);
tty_write_unlock(tty);
- if (!signal_pending(current))
+ if (signal_pending(current))
return -EINTR;
return 0;
}
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b1a757a5ee2..8f81139d619 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -981,16 +981,9 @@ EXPORT_SYMBOL_GPL(tty_perform_flush);
int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct tty_struct *real_tty;
unsigned long flags;
int retval;
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER)
- real_tty = tty->link;
- else
- real_tty = tty;
-
switch (cmd) {
case TCXONC:
retval = tty_check_change(tty);
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fb4d391810b..76f26710fc1 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,28 +1,26 @@
-comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
depends on EXPERIMENTAL=n
+comment "Enable only one of the two stacks, unless you know what you are doing"
+ depends on EXPERIMENTAL
+
config FIREWIRE
- tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL"
+ tristate "New FireWire stack, EXPERIMENTAL"
depends on EXPERIMENTAL
select CRC_ITU_T
help
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
- stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
- or both. Please read http://wiki.linux1394.org/JujuMigration before
- you enable the new stack.
+ stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
+ Please read http://wiki.linux1394.org/JujuMigration before you
+ enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core. It functionally replaces ieee1394, raw1394,
and video1394.
- NOTE:
-
- You should only build ONE of the stacks, unless you REALLY know what
- you are doing.
-
config FIREWIRE_OHCI
- tristate "Support for OHCI FireWire host controllers"
+ tristate "OHCI-1394 controllers"
depends on PCI && FIREWIRE
help
Enable this driver if you have a FireWire controller based
@@ -33,12 +31,12 @@ config FIREWIRE_OHCI
called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394
stack.
- NOTE:
+ NOTE:
- You should only build ohci1394 or firewire-ohci, but not both.
- If you nevertheless want to install both, you should configure them
- only as modules and blacklist the driver(s) which you don't want to
- have auto-loaded. Add either
+ You should only build either firewire-ohci or the old ohci1394 driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
blacklist firewire-ohci
or
@@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG
default y
config FIREWIRE_SBP2
- tristate "Support for storage devices (SBP-2 protocol driver)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on FIREWIRE && SCSI
help
This option enables you to use SBP-2 devices connected to a
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index dda14015e87..c639915fc3c 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -205,6 +205,7 @@ fw_device_op_read(struct file *file,
return dequeue_event(client, buffer, count);
}
+/* caller must hold card->lock so that node pointers can be dereferenced here */
static void
fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
struct client *client)
@@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
event->closure = client->bus_reset_closure;
event->type = FW_CDEV_EVENT_BUS_RESET;
event->generation = client->device->generation;
- smp_rmb(); /* node_id must not be older than generation */
event->node_id = client->device->node_id;
event->local_node_id = card->local_node->node_id;
event->bm_node_id = 0; /* FIXME: We don't track the BM. */
@@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer)
{
struct fw_cdev_get_info *get_info = buffer;
struct fw_cdev_event_bus_reset bus_reset;
+ struct fw_card *card = client->device->card;
unsigned long ret = 0;
client->version = get_info->version;
@@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer)
client->bus_reset_closure = get_info->bus_reset_closure;
if (get_info->bus_reset != 0) {
void __user *uptr = u64_to_uptr(get_info->bus_reset);
+ unsigned long flags;
+ spin_lock_irqsave(&card->lock, flags);
fill_bus_reset_event(&bus_reset, client);
+ spin_unlock_irqrestore(&card->lock, flags);
+
if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
return -EFAULT;
}
- get_info->card = client->device->card->index;
+ get_info->card = card->index;
return 0;
}
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 4f02c55f13e..0b66306af47 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -265,27 +265,25 @@ static void log_irqs(u32 evt)
!(evt & OHCI1394_busReset))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": IRQ "
- "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- evt,
- evt & OHCI1394_selfIDComplete ? " selfID" : "",
- evt & OHCI1394_RQPkt ? " AR_req" : "",
- evt & OHCI1394_RSPkt ? " AR_resp" : "",
- evt & OHCI1394_reqTxComplete ? " AT_req" : "",
- evt & OHCI1394_respTxComplete ? " AT_resp" : "",
- evt & OHCI1394_isochRx ? " IR" : "",
- evt & OHCI1394_isochTx ? " IT" : "",
- evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
- evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
- evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
- evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
- evt & OHCI1394_busReset ? " busReset" : "",
- evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
- OHCI1394_RSPkt | OHCI1394_reqTxComplete |
- OHCI1394_respTxComplete | OHCI1394_isochRx |
- OHCI1394_isochTx | OHCI1394_postedWriteErr |
- OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
- OHCI1394_regAccessFail | OHCI1394_busReset)
+ fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+ evt & OHCI1394_selfIDComplete ? " selfID" : "",
+ evt & OHCI1394_RQPkt ? " AR_req" : "",
+ evt & OHCI1394_RSPkt ? " AR_resp" : "",
+ evt & OHCI1394_reqTxComplete ? " AT_req" : "",
+ evt & OHCI1394_respTxComplete ? " AT_resp" : "",
+ evt & OHCI1394_isochRx ? " IR" : "",
+ evt & OHCI1394_isochTx ? " IT" : "",
+ evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
+ evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
+ evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
+ evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
+ evt & OHCI1394_busReset ? " busReset" : "",
+ evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
+ OHCI1394_RSPkt | OHCI1394_reqTxComplete |
+ OHCI1394_respTxComplete | OHCI1394_isochRx |
+ OHCI1394_isochTx | OHCI1394_postedWriteErr |
+ OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+ OHCI1394_regAccessFail | OHCI1394_busReset)
? " ?" : "");
}
@@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s)
if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, "
- "local node ID %04x\n", self_id_count, generation, node_id);
+ fw_notify("%d selfIDs, generation %d, local node ID %04x\n",
+ self_id_count, generation, node_id);
for (; self_id_count--; ++s)
if ((*s & 1 << 23) == 0)
- printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] "
- "%s gc=%d %s %s%s%s\n",
- *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
- speed[*s >> 14 & 3], *s >> 16 & 63,
- power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
- *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
+ fw_notify("selfID 0: %08x, phy %d [%c%c%c] "
+ "%s gc=%d %s %s%s%s\n",
+ *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
+ speed[*s >> 14 & 3], *s >> 16 & 63,
+ power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
+ *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
else
- printk(KERN_DEBUG "selfID n: %08x, phy %d "
- "[%c%c%c%c%c%c%c%c]\n",
- *s, *s >> 24 & 63,
- _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
- _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
+ fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
+ *s, *s >> 24 & 63,
+ _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
+ _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
}
static const char *evts[] = {
@@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
evt = 0x1f;
if (evt == OHCI1394_evt_bus_reset) {
- printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n",
- dir, (header[2] >> 16) & 0xff);
+ fw_notify("A%c evt_bus_reset, generation %d\n",
+ dir, (header[2] >> 16) & 0xff);
return;
}
if (header[0] == ~header[1]) {
- printk(KERN_DEBUG "A%c %s, %s, %08x\n",
- dir, evts[evt], phys[header[0] >> 30 & 0x3],
- header[0]);
+ fw_notify("A%c %s, %s, %08x\n",
+ dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]);
return;
}
@@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
switch (tcode) {
case 0xe: case 0xa:
- printk(KERN_DEBUG "A%c %s, %s\n",
- dir, evts[evt], tcodes[tcode]);
+ fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]);
break;
case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s, %04x%08x%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], header[1] & 0xffff, header[2], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s, %04x%08x%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], header[1] & 0xffff, header[2], specific);
break;
default:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], specific);
}
}
@@ -548,6 +543,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
p.header_length = 12;
p.payload_length = 0;
break;
+
+ default:
+ /* FIXME: Stop context, discard everything, and restart? */
+ p.header_length = 0;
+ p.payload_length = 0;
}
p.payload = (void *) buffer + p.header_length;
@@ -1468,6 +1468,9 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
reg_write(ohci, OHCI1394_HCControlClear,
OHCI1394_HCControl_noByteSwapData);
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_LinkControlClear,
+ OHCI1394_LinkControl_rcvPhyPkt);
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_rcvSelfID |
OHCI1394_LinkControl_cycleTimerEnable |
@@ -1481,7 +1484,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
ar_context_run(&ohci->ar_request_ctx);
ar_context_run(&ohci->ar_response_ctx);
- reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
reg_write(ohci, OHCI1394_IntEventClear, ~0);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index b2458bb8e9c..227d2e036cd 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -1051,7 +1051,8 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
break;
case SBP2_CSR_LOGICAL_UNIT_DIRECTORY:
- if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0)
+ /* Adjust for the increment in the iterator */
+ if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0)
return -ENOMEM;
break;
}
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index ccf0e4cf108..03ae8a77c47 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -20,6 +20,7 @@
#include <linux/completion.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request);
struct fw_phy_packet {
struct fw_packet packet;
struct completion done;
+ struct kref kref;
};
-static void
-transmit_phy_packet_callback(struct fw_packet *packet,
- struct fw_card *card, int status)
+static void phy_packet_release(struct kref *kref)
+{
+ struct fw_phy_packet *p =
+ container_of(kref, struct fw_phy_packet, kref);
+ kfree(p);
+}
+
+static void transmit_phy_packet_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
{
struct fw_phy_packet *p =
container_of(packet, struct fw_phy_packet, packet);
complete(&p->done);
+ kref_put(&p->kref, phy_packet_release);
}
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count)
{
- struct fw_phy_packet p;
+ struct fw_phy_packet *p;
+ long timeout = DIV_ROUND_UP(HZ, 10);
u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
PHY_CONFIG_ROOT_ID(node_id) |
PHY_CONFIG_GAP_COUNT(gap_count);
- p.packet.header[0] = data;
- p.packet.header[1] = ~data;
- p.packet.header_length = 8;
- p.packet.payload_length = 0;
- p.packet.speed = SCODE_100;
- p.packet.generation = generation;
- p.packet.callback = transmit_phy_packet_callback;
- init_completion(&p.done);
-
- card->driver->send_request(card, &p.packet);
- wait_for_completion(&p.done);
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL)
+ return;
+
+ p->packet.header[0] = data;
+ p->packet.header[1] = ~data;
+ p->packet.header_length = 8;
+ p->packet.payload_length = 0;
+ p->packet.speed = SCODE_100;
+ p->packet.generation = generation;
+ p->packet.callback = transmit_phy_packet_callback;
+ init_completion(&p->done);
+ kref_set(&p->kref, 2);
+
+ card->driver->send_request(card, &p->packet);
+ timeout = wait_for_completion_timeout(&p->done, timeout);
+ kref_put(&p->kref, phy_packet_release);
+
+ /* will leak p if the callback is never executed */
+ WARN_ON(timeout == 0);
}
void fw_flush_transactions(struct fw_card *card)
@@ -572,7 +591,8 @@ allocate_request(struct fw_packet *p)
break;
default:
- BUG();
+ fw_error("ERROR - corrupt request received - %08x %08x %08x\n",
+ p->header[0], p->header[1], p->header[2]);
return NULL;
}
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ed33fddc4de..f00f497b9ca 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
#include <asm/io.h>
/* uGuru3 bank addresses */
@@ -323,7 +324,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, "unknown", {
+ { 0x0013, "Abit AW8D", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -349,6 +350,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX2 Fan", 36, 2, 60, 1, 0 },
{ "AUX3 Fan", 37, 2, 60, 1, 0 },
{ "AUX4 Fan", 38, 2, 60, 1, 0 },
+ { "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
{ 0x0014, "Abit AB9 Pro", {
@@ -1111,11 +1113,12 @@ static int __init abituguru3_detect(void)
{
/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
- at CMD instead, why is unknown. So we test for 0x05 too. */
+ or 0x55 at CMD instead, why is unknown. */
u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
if (((data_val == 0x00) || (data_val == 0x08)) &&
- ((cmd_val == 0xAC) || (cmd_val == 0x05)))
+ ((cmd_val == 0xAC) || (cmd_val == 0x05) ||
+ (cmd_val == 0x55)))
return ABIT_UGURU3_BASE;
ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
@@ -1138,6 +1141,15 @@ static int __init abituguru3_init(void)
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
+#ifdef CONFIG_DMI
+ const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+ /* safety check, refuse to load on non Abit motherboards */
+ if (!force && (!board_vendor ||
+ strcmp(board_vendor, "http://www.abit.com.tw/")))
+ return -ENODEV;
+#endif
+
address = abituguru3_detect();
if (address < 0)
return address;
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index c1009d6f979..93dbf5e7ff8 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -309,6 +309,9 @@ no_sensor_update:
ADT7473_REG_PWM_BHVR(i));
}
+ i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+ data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
+
data->limits_last_updated = local_jiffies;
data->limits_valid = 1;
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index fa769690515..de698dc7302 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client)
the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
+ int value;
+
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
- else
- return swab16(i2c_smbus_read_word_data(client, reg));
+
+ value = i2c_smbus_read_word_data(client, reg);
+ return (value < 0) ? value : swab16(value);
}
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev)
int i;
dev_dbg(&client->dev, "Starting lm75 update\n");
- for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = lm75_read_value(client,
- LM75_REG_TEMP[i]);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ int status;
+
+ status = lm75_read_value(client, LM75_REG_TEMP[i]);
+ if (status < 0)
+ dev_dbg(&client->dev, "reg %d, err %d\n",
+ LM75_REG_TEMP[i], status);
+ else
+ data->temp[i] = status;
+ }
data->last_updated = jiffies;
data->valid = 1;
}
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 182fe6a5605..ee5eca1c192 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range )
{
int i;
- if ( range < lm85_range_map[0] ) {
- return 0 ;
- } else if ( range > lm85_range_map[15] ) {
+ if (range >= lm85_range_map[15])
return 15 ;
- } else { /* find closest match */
- for ( i = 14 ; i >= 0 ; --i ) {
- if ( range > lm85_range_map[i] ) { /* range bracketed */
- if ((lm85_range_map[i+1] - range) <
- (range - lm85_range_map[i])) {
- i++;
- break;
- }
- break;
- }
+
+ /* Find the closest match */
+ for (i = 14; i >= 0; --i) {
+ if (range >= lm85_range_map[i]) {
+ if ((lm85_range_map[i + 1] - range) <
+ (range - lm85_range_map[i]))
+ return i + 1;
+ return i;
}
}
- return( i & 0x0f );
+
+ return 0;
}
#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1305ef190fc..9e8c875437b 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -290,12 +290,12 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
* bus, or started a new i2c message
*/
- if (iicstat & S3C2410_IICSTAT_LASTBIT &&
+ if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
dev_dbg(i2c->dev, "ack was not received\n");
- s3c24xx_i2c_stop(i2c, -EREMOTEIO);
+ s3c24xx_i2c_stop(i2c, -ENXIO);
goto out_ack;
}
@@ -305,7 +305,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
i2c->state = STATE_WRITE;
/* terminate the transfer if there is nothing to do
- * (used by the i2c probe to find devices */
+ * as this is used by the i2c probe to find devices. */
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
@@ -323,7 +323,17 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
* end of the message, and if so, work out what to do
*/
+ if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
+ if (iicstat & S3C2410_IICSTAT_LASTBIT) {
+ dev_dbg(i2c->dev, "WRITE: No Ack\n");
+
+ s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
+ goto out_ack;
+ }
+ }
+
retry_write:
+
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
@@ -377,17 +387,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
* going to do any more read/write
*/
- if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) &&
- !(is_msglast(i2c) && is_lastmsg(i2c))) {
-
- if (iicstat & S3C2410_IICSTAT_LASTBIT) {
- dev_dbg(i2c->dev, "READ: No Ack\n");
-
- s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
- goto out_ack;
- }
- }
-
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
@@ -949,3 +948,4 @@ MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c2410-i2c");
+MODULE_ALIAS("platform:s3c2440-i2c");
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index d024ac8fad1..cc24803fadf 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
struct clk *clkp;
struct resource *mem, *irq;
ide_hwif_t *hwif;
- void __iomem *base;
- int pribase, i;
+ unsigned long base;
+ int i;
hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
printk(KERN_ERR "failed to get memory region resource\n");
return -ENODEV;
}
+
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq == NULL) {
printk(KERN_ERR "failed to get IRQ resource\n");
return -ENODEV;
}
- base = (void *)mem->start;
+ if (request_mem_region(mem->start, mem->end - mem->start + 1,
+ "palm_bk3710") == NULL) {
+ printk(KERN_ERR "failed to request memory region\n");
+ return -EBUSY;
+ }
+
+ base = IO_ADDRESS(mem->start);
/* Configure the Palm Chip controller */
- palm_bk3710_chipinit(base);
+ palm_bk3710_chipinit((void __iomem *)base);
- pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = pribase + i;
- hw.io_ports.ctl_addr = mem->start +
- IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+ hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
hw.chipset = ide_palm3710;
@@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void)
module_init(palm_bk3710_init);
MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 9134488ac04..2d92214096a 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -22,6 +22,10 @@
#define DRV_NAME "ide_generic"
+static int probe_mask = 0x03;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
+
static ssize_t store_add(struct class *cls, const char *buf, size_t n)
{
ide_hwif_t *hwif;
@@ -89,6 +93,9 @@ static int __init ide_generic_init(void)
u8 idx[MAX_HWIFS];
int i;
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
+ "parameter for probing all legacy ISA IDE ports\n");
+
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif;
unsigned long io_addr = ide_default_io_base(i);
@@ -96,7 +103,7 @@ static int __init ide_generic_init(void)
idx[i] = 0xff;
- if (io_addr) {
+ if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 55ec7f79877..8af88bf0969 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -76,7 +76,7 @@ static int proc_ide_read_mate
ide_hwif_t *hwif = (ide_hwif_t *) data;
int len;
- if (hwif && hwif->mate && hwif->mate->present)
+ if (hwif && hwif->mate)
len = sprintf(page, "%s\n", hwif->mate->name);
else
len = sprintf(page, "(none)\n");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0c908ca3ff7..ab545ffa154 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
u8 stat;
/*
- * Last sector was transfered, wait until drive is ready.
- * This can take up to 10 usec, but we will wait max 1 ms.
+ * Last sector was transfered, wait until device is ready. This can
+ * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
*/
- for (retries = 0; retries < 100; retries++) {
+ for (retries = 0; retries < 1000; retries++) {
stat = ide_read_status(drive);
if (stat & BUSY_STAT)
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index aa2ea3deac8..3381424d70a 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
+ unsigned long data_addr, ctl_addr;
DEBUG(0, "ide_detach(0x%p)\n", link);
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
ide_release(link);
- release_region(hwif->io_ports.ctl_addr, 1);
- release_region(hwif->io_ports.data_addr, 8);
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
kfree(info);
} /* ide_detach */
@@ -194,6 +198,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
if (hwif->present)
return hwif;
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return hwif;
+ }
+
+ return hwif;
+
out_release:
release_region(ctl, 1);
release_region(io, 8);
@@ -222,7 +236,7 @@ static int ide_config(struct pcmcia_device *link)
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
ide_hwif_t *hwif;
@@ -319,30 +333,15 @@ static int ide_config(struct pcmcia_device *link)
if (is_kme)
outb(0x81, ctl_base+1);
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
- if (hwif)
- break;
- if (link->io.NumPorts1 == 0x20) {
+ hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (hwif == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
- if (hwif) {
- io_base += 0x10;
- ctl_base += 0x10;
- break;
- }
- }
- msleep(100);
}
- if (hwif == NULL) {
- printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
- ", irq %u failed\n", io_base, ctl_base,
- link->irq.AssignedIRQ);
+ if (hwif == NULL)
goto failed;
- }
info->ndev = 1;
sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
@@ -411,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
@@ -440,6 +440,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -450,6 +451,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 6e99080497b..725c80508d9 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -81,8 +81,6 @@
* 0.5 doesn't work.
*/
-#define OPTI621_DEBUG /* define for debug messages */
-
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -92,28 +90,6 @@
#include <asm/io.h>
-//#define OPTI621_MAX_PIO 3
-/* In fact, I do not have any PIO 4 drive
- * (address: 25 ns, data: 70 ns, recovery: 35 ns),
- * but OPTi 82C621 is programmable and it can do (minimal values):
- * on 40MHz PCI bus (pulse 25 ns):
- * address: 25 ns, data: 25 ns, recovery: 50 ns;
- * on 20MHz PCI bus (pulse 50 ns):
- * address: 50 ns, data: 50 ns, recovery: 100 ns.
- */
-
-/* #define READ_PREFETCH 0 */
-/* Uncomment for disable read prefetch.
- * There is some readprefetch capatibility in hdparm,
- * but when I type hdparm -P 1 /dev/hda, I got errors
- * and till reset drive is inaccessible.
- * This (hw) read prefetch is safe on my drive.
- */
-
-#ifndef READ_PREFETCH
-#define READ_PREFETCH 0x40 /* read prefetch is enabled */
-#endif /* else read prefetch is disabled */
-
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
@@ -122,51 +98,8 @@
static int reg_base;
-#define PIO_NOT_EXIST 254
-#define PIO_DONT_KNOW 255
-
static DEFINE_SPINLOCK(opti621_lock);
-/* there are stored pio numbers from other calls of opti621_set_pio_mode */
-static void compute_pios(ide_drive_t *drive, const u8 pio)
-/* Store values into drive->drive_data
- * second_contr - 0 for primary controller, 1 for secondary
- * slave_drive - 0 -> pio is for master, 1 -> pio is for slave
- * pio - PIO mode for selected drive (for other we don't know)
- */
-{
- int d;
- ide_hwif_t *hwif = HWIF(drive);
-
- drive->drive_data = pio;
-
- for (d = 0; d < 2; ++d) {
- drive = &hwif->drives[d];
- if (drive->present) {
- if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
-#ifdef OPTI621_DEBUG
- printk("%s: Selected PIO mode %d\n",
- drive->name, drive->drive_data);
-#endif
- } else {
- drive->drive_data = PIO_NOT_EXIST;
- }
- }
-}
-
-static int cmpt_clk(int time, int bus_speed)
-/* Returns (rounded up) time in clocks for time in ns,
- * with bus_speed in MHz.
- * Example: bus_speed = 40 MHz, time = 80 ns
- * 1000/40 = 25 ns (clk value),
- * 80/25 = 3.2, rounded up to 4 (I hope ;-)).
- * Use idebus=xx to select right frequency.
- */
-{
- return ((time*bus_speed+999)/1000);
-}
-
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
@@ -199,83 +132,29 @@ static u8 read_reg(int reg)
return ret;
}
-typedef struct pio_clocks_s {
- int address_time; /* Address setup (clocks) */
- int data_time; /* Active/data pulse (clocks) */
- int recovery_time; /* Recovery time (clocks) */
-} pio_clocks_t;
-
-static void compute_clocks(int pio, pio_clocks_t *clks)
-{
- if (pio != PIO_NOT_EXIST) {
- int adr_setup, data_pls;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
-
- adr_setup = ide_pio_timings[pio].setup_time;
- data_pls = ide_pio_timings[pio].active_time;
- clks->address_time = cmpt_clk(adr_setup, bus_speed);
- clks->data_time = cmpt_clk(data_pls, bus_speed);
- clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
- - adr_setup-data_pls, bus_speed);
- if (clks->address_time < 1)
- clks->address_time = 1;
- if (clks->address_time > 4)
- clks->address_time = 4;
- if (clks->data_time < 1)
- clks->data_time = 1;
- if (clks->data_time > 16)
- clks->data_time = 16;
- if (clks->recovery_time < 2)
- clks->recovery_time = 2;
- if (clks->recovery_time > 17)
- clks->recovery_time = 17;
- } else {
- clks->address_time = 1;
- clks->data_time = 1;
- clks->recovery_time = 2;
- /* minimal values */
- }
-}
-
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- /* primary and secondary drives share some registers,
- * so we have to program both drives
- */
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *pair = ide_get_paired_drive(drive);
unsigned long flags;
- u8 pio1 = 0, pio2 = 0;
- pio_clocks_t first, second;
- int ax, drdy;
- u8 cycle1, cycle2, misc;
- ide_hwif_t *hwif = HWIF(drive);
-
- /* sets drive->drive_data for both drives */
- compute_pios(drive, pio);
- pio1 = hwif->drives[0].drive_data;
- pio2 = hwif->drives[1].drive_data;
-
- compute_clocks(pio1, &first);
- compute_clocks(pio2, &second);
-
- /* ax = max(a1,a2) */
- ax = (first.address_time < second.address_time) ? second.address_time : first.address_time;
-
- drdy = 2; /* DRDY is default 2 (by OPTi Databook) */
-
- cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2);
- cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2);
- misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1);
-
-#ifdef OPTI621_DEBUG
- printk("%s: master: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, first.data_time,
- first.recovery_time, drdy);
- printk("%s: slave: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, second.data_time,
- second.recovery_time, drdy);
-#endif
+ u8 tim, misc, addr_pio = pio, clk;
+
+ /* DRDY is default 2 (by OPTi Databook) */
+ static const u8 addr_timings[2][5] = {
+ { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
+ { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
+ };
+ static const u8 data_rec_timings[2][5] = {
+ { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
+ { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
+ };
+
+ drive->drive_data = XFER_PIO_0 + pio;
+
+ if (pair->present) {
+ if (pair->drive_data && pair->drive_data < drive->drive_data)
+ addr_pio = pair->drive_data - XFER_PIO_0;
+ }
spin_lock_irqsave(&opti621_lock, flags);
@@ -289,24 +168,21 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
- /* read version, probably 0 */
- read_reg(STRAP_REG);
- /* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(0, MISC_REG);
- /* set read cycle timings */
- write_reg(cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(cycle1, WRITE_REG);
+ /* check CLK speed */
+ clk = read_reg(STRAP_REG) & 1;
+
+ printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
- /* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(1, MISC_REG);
+ tim = data_rec_timings[clk][pio];
+ misc = addr_timings[clk][addr_pio];
+
+ /* select Index-0/1 for Register-A/B */
+ write_reg(drive->select.b.unit, MISC_REG);
/* set read cycle timings */
- write_reg(cycle2, READ_REG);
+ write_reg(tim, READ_REG);
/* set write cycle timings */
- write_reg(cycle2, WRITE_REG);
+ write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
@@ -319,45 +195,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&opti621_lock, flags);
}
-static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
-{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-}
-
static const struct ide_port_ops opti621_port_ops = {
- .port_init_devs = opti621_port_init_devs,
.set_pio_mode = opti621_set_pio_mode,
};
-static const struct ide_port_info opti621_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "OPTI621",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }, { /* 1 */
- .name = "OPTI621X",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }
+static const struct ide_port_info opti621_chipset __devinitdata = {
+ .name = "OPTI621/X",
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
+ .port_ops = &opti621_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
};
static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]);
+ return ide_setup_pci_device(dev, &opti621_chipset);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
+ { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 48aa019127b..ba2d5872796 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif {
int irq;
int kind;
int aapl_bus_id;
- unsigned cable_80 : 1;
unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
@@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
return 0;
}
+static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+ struct device_node *np = pmif->node;
+ const char *cable = of_get_property(np, "cable-type", NULL);
+
+ /* Get cable type from device-tree. */
+ if (cable && !strncmp(cable, "80-", 3))
+ return ATA_CBL_PATA80;
+
+ /*
+ * G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they have a 80 conductor cable, this seem
+ * to be always the case unless the user mucked around.
+ */
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ return ATA_CBL_PATA40;
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
+};
+
+static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
};
static const struct ide_port_ops pmac_ide_port_ops = {
@@ -949,10 +978,7 @@ static const struct ide_port_info pmac_port_info = {
/*
* Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI). Note that a channel
- * that ends up beeing free of any device is not kept around by this driver
- * (it is kept in 2.4). This introduce an interface numbering change on some
- * rare machines unfortunately, but it's better this way.
+ * called by one of the 2 probe functions (macio or PCI).
*/
static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
@@ -962,7 +988,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = pmac_port_info;
- pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
@@ -979,6 +1004,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA4;
} else
pmif->kind = controller_kl_ata3;
@@ -992,22 +1018,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
- /* Get cable type from device-tree */
- if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- const char* cable = of_get_property(np, "cable-type", NULL);
- if (cable && !strncmp(cable, "80-", 3))
- pmif->cable_80 = 1;
- }
- /* G5's seem to have incorrect cable type in device-tree. Let's assume
- * they have a 80 conductor cable, this seem to be always the case unless
- * the user mucked around
- */
- if (of_device_is_compatible(np, "K2-UATA") ||
- of_device_is_compatible(np, "shasta-ata"))
- pmif->cable_80 = 1;
-
/* On Kauai-type controllers, we make sure the FCR is correct */
if (pmif->kauai_fcr)
writel(KAUAI_FCR_UATA_MAGIC |
@@ -1053,7 +1063,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
@@ -1070,11 +1079,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
}
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- if (pmif->cable_80 == 0)
- d.udma_mask &= ATA_UDMA2;
-#endif
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 545663ef820..95f45f9b8e5 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
source "drivers/firewire/Kconfig"
config IEEE1394
- tristate "IEEE 1394 (FireWire) support"
+ tristate "Stable FireWire stack"
depends on PCI || BROKEN
help
IEEE 1394 describes a high performance serial bus, which is also
@@ -19,30 +19,45 @@ config IEEE1394
To compile this driver as a module, say M here: the
module will be called ieee1394.
-comment "Subsystem Options"
- depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
- bool "Excessive debugging output"
- depends on IEEE1394
+config IEEE1394_OHCI1394
+ tristate "OHCI-1394 controllers"
+ depends on PCI && IEEE1394
help
- If you say Y here, you will get very verbose debugging logs from
- the subsystem which includes a dump of the header of every sent
- and received packet. This can amount to a high amount of data
- collected in a very short time which is usually also saved to
- disk by the system logging daemons.
+ Enable this driver if you have an IEEE 1394 controller based on the
+ OHCI-1394 specification. The current driver is only tested with OHCI
+ chipsets made by Texas Instruments and NEC. Most third-party vendors
+ use one of these chipsets. It should work with any OHCI-1394
+ compliant card, however.
- Say Y if you really want or need the debugging output, everyone
- else says N.
+ To compile this driver as a module, say M here: the
+ module will be called ohci1394.
-comment "Controllers"
- depends on IEEE1394
+ NOTE:
-comment "Texas Instruments PCILynx requires I2C"
+ You should only build either ohci1394 or the new firewire-ohci driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
+
+ blacklist firewire-ohci
+ or
+ blacklist ohci1394
+ blacklist video1394
+ blacklist dv1394
+
+ to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+ depending on your distribution. The latter two modules should be
+ blacklisted together with ohci1394 because they depend on ohci1394.
+
+ If you have an old modprobe which doesn't implement the blacklist
+ directive, use "install modulename /bin/true" for the modules to be
+ blacklisted.
+
+comment "PCILynx controller requires I2C"
depends on IEEE1394 && I2C=n
config IEEE1394_PCILYNX
- tristate "Texas Instruments PCILynx support"
+ tristate "PCILynx controller"
depends on PCI && IEEE1394 && I2C
select I2C_ALGOBIT
help
@@ -57,35 +72,11 @@ config IEEE1394_PCILYNX
PowerMacs G3 B&W contain the PCILynx controller. Therefore
almost everybody can say N here.
-config IEEE1394_OHCI1394
- tristate "OHCI-1394 support"
- depends on PCI && IEEE1394
- help
- Enable this driver if you have an IEEE 1394 controller based on the
- OHCI-1394 specification. The current driver is only tested with OHCI
- chipsets made by Texas Instruments and NEC. Most third-party vendors
- use one of these chipsets. It should work with any OHCI-1394
- compliant card, however.
-
- To compile this driver as a module, say M here: the
- module will be called ohci1394.
-
-comment "Protocols"
- depends on IEEE1394
-
-config IEEE1394_VIDEO1394
- tristate "OHCI-1394 Video support"
- depends on IEEE1394 && IEEE1394_OHCI1394
- help
- This option enables video device usage for OHCI-1394 cards. Enable
- this option only if you have an IEEE 1394 video device connected to
- an OHCI-1394 card.
-
comment "SBP-2 support (for storage devices) requires SCSI"
depends on IEEE1394 && SCSI=n
config IEEE1394_SBP2
- tristate "SBP-2 support (Harddisks etc.)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on IEEE1394 && SCSI
help
This option enables you to use SBP-2 devices connected to an IEEE
@@ -127,24 +118,47 @@ config IEEE1394_ETH1394
The module is called eth1394 although it does not emulate Ethernet.
+config IEEE1394_RAWIO
+ tristate "raw1394 userspace interface"
+ depends on IEEE1394
+ help
+ This option adds support for the raw1394 device file which enables
+ direct communication of user programs with IEEE 1394 devices
+ (isochronous and asynchronous). Almost all application programs
+ which access FireWire require this option.
+
+ To compile this driver as a module, say M here: the module will be
+ called raw1394.
+
+config IEEE1394_VIDEO1394
+ tristate "video1394 userspace interface"
+ depends on IEEE1394 && IEEE1394_OHCI1394
+ help
+ This option adds support for the video1394 device files which enable
+ isochronous communication of user programs with IEEE 1394 devices,
+ especially video capture or export. This interface is used by all
+ libdc1394 based programs and by several other programs, in addition to
+ the raw1394 interface. It is generally not required for DV capture.
+
+ To compile this driver as a module, say M here: the module will be
+ called video1394.
+
config IEEE1394_DV1394
- tristate "OHCI-DV I/O support (deprecated)"
+ tristate "dv1394 userspace interface (deprecated)"
depends on IEEE1394 && IEEE1394_OHCI1394
help
The dv1394 driver is unsupported and may be removed from Linux in a
future release. Its functionality is now provided by raw1394 together
with libraries such as libiec61883.
-config IEEE1394_RAWIO
- tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+ bool "Excessive debugging output"
depends on IEEE1394
help
- This option adds support for the raw1394 device file which enables
- direct communication of user programs with the IEEE 1394 bus and thus
- with the attached peripherals. Almost all application programs which
- access FireWire require this option.
+ If you say Y here, you will get very verbose debugging logs from the
+ ieee1394 drivers, including sent and received packet headers. This
+ will quickly result in large amounts of data sent to the system log.
- To compile this driver as a module, say M here: the module will be
- called raw1394.
+ Say Y if you really need the debugging output. Everyone else says N.
endmenu
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index f806da184b5..caed42bf7ef 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -423,7 +423,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file,
unsigned long flags;
spin_lock_irqsave(&file->async_file->lock, flags);
- if (!file->async_file->is_closed) {
+ if (file->async_file->is_closed) {
spin_unlock_irqrestore(&file->async_file->lock, flags);
return;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index b224079d4e1..d5862e5d99a 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -109,7 +109,11 @@ static int mthca_alloc_icm_pages(struct scatterlist *mem, int order, gfp_t gfp_m
{
struct page *page;
- page = alloc_pages(gfp_mask, order);
+ /*
+ * Use __GFP_ZERO because buggy firmware assumes ICM pages are
+ * cleared, and subtle failures are seen if they aren't.
+ */
+ page = alloc_pages(gfp_mask | __GFP_ZERO, order);
if (!page)
return -ENOMEM;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 99b3c4ae86e..d617da9bd35 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2456,10 +2456,8 @@ static struct ib_mr *nes_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length)
goto enough_pages;
if ((page_count&0x01FF) == 0) {
- if (page_count>(1024*512)) {
+ if (page_count >= 1024 * 512) {
ib_umem_release(region);
- pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase,
- vpbl.pbl_pbase);
nes_free_resource(nesadapter,
nesadapter->allocated_mrs, stag_index);
kfree(nesmr);
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index eebc72465fc..72c63e5dd63 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -28,6 +28,7 @@
#include <linux/input.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
/*
* Check that the effect_id is a valid effect and whether the user
@@ -166,8 +167,10 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
if (ret)
goto out;
+ spin_lock_irq(&dev->event_lock);
ff->effects[id] = *effect;
ff->effect_owners[id] = file;
+ spin_unlock_irq(&dev->event_lock);
out:
mutex_unlock(&ff->mutex);
@@ -189,16 +192,22 @@ static int erase_effect(struct input_dev *dev, int effect_id,
if (error)
return error;
+ spin_lock_irq(&dev->event_lock);
ff->playback(dev, effect_id, 0);
+ ff->effect_owners[effect_id] = NULL;
+ spin_unlock_irq(&dev->event_lock);
if (ff->erase) {
error = ff->erase(dev, effect_id);
- if (error)
+ if (error) {
+ spin_lock_irq(&dev->event_lock);
+ ff->effect_owners[effect_id] = file;
+ spin_unlock_irq(&dev->event_lock);
+
return error;
+ }
}
- ff->effect_owners[effect_id] = NULL;
-
return 0;
}
@@ -263,8 +272,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type,
if (type != EV_FF)
return 0;
- mutex_lock(&ff->mutex);
-
switch (code) {
case FF_GAIN:
if (!test_bit(FF_GAIN, dev->ffbit) || value > 0xffff)
@@ -286,7 +293,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type,
break;
}
- mutex_unlock(&ff->mutex);
return 0;
}
EXPORT_SYMBOL_GPL(input_ff_event);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3ad8bd9f754..432699d61c5 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -15,7 +15,6 @@ if INPUT_MISC
config INPUT_PCSPKR
tristate "PC Speaker support"
depends on PCSPKR_PLATFORM
- depends on SND_PCSP=n
help
Say Y here if you want the standard PC Speaker to be used for
bells and whistles.
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 8dd3942f302..ce6fdec19e1 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -589,6 +589,21 @@ static void atp_close(struct input_dev *input)
dev->open = 0;
}
+static int atp_handle_geyser(struct atp *dev)
+{
+ struct usb_device *udev = dev->udev;
+
+ if (!atp_is_fountain(dev)) {
+ /* switch to raw sensor mode */
+ if (atp_geyser_init(udev))
+ return -EIO;
+
+ printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+ }
+
+ return 0;
+}
+
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
struct atp *dev;
@@ -633,14 +648,6 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
else
dev->datalen = 81;
- if (!atp_is_fountain(dev)) {
- /* switch to raw sensor mode */
- if (atp_geyser_init(udev))
- goto err_free_devs;
-
- printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
- }
-
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb)
goto err_free_devs;
@@ -654,6 +661,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, dev->datalen, atp_complete, dev, 1);
+ error = atp_handle_geyser(dev);
+ if (error)
+ goto err_free_buffer;
+
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
@@ -744,6 +755,20 @@ static void atp_disconnect(struct usb_interface *iface)
printk(KERN_INFO "input: appletouch disconnected\n");
}
+static int atp_recover(struct atp *dev)
+{
+ int error;
+
+ error = atp_handle_geyser(dev);
+ if (error)
+ return error;
+
+ if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ return 0;
+}
+
static int atp_suspend(struct usb_interface *iface, pm_message_t message)
{
struct atp *dev = usb_get_intfdata(iface);
@@ -764,12 +789,20 @@ static int atp_resume(struct usb_interface *iface)
return 0;
}
+static int atp_reset_resume(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+
+ return atp_recover(dev);
+}
+
static struct usb_driver atp_driver = {
.name = "appletouch",
.probe = atp_probe,
.disconnect = atp_disconnect,
.suspend = atp_suspend,
.resume = atp_resume,
+ .reset_resume = atp_reset_resume,
.id_table = atp_table,
};
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 9aafa96cb74..78eb7841174 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
},
},
{
+ .ident = "Fujitsu-Siemens Amilo Pro 2030",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {
/*
* No data is coming from the touchscreen unless KBC
* is in legacy mode.
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 592ff55b62d..170f71ee577 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -952,8 +952,12 @@ static int i8042_resume(struct platform_device *dev)
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: Can't write CTR to resume\n");
- return -EIO;
+ printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ msleep(50);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: CTR write retry failed\n");
+ return -EIO;
+ }
}
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 5126d5d9ea0..2e554a4ab33 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -176,7 +176,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* we set it now, so we can trap and pass that trap to the Guest if it
* uses the FPU. */
if (cpu->ts)
- lguest_set_ts();
+ unlazy_fpu(current);
/* SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
@@ -196,6 +196,10 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* trap made the switcher code come back, and an error code which some
* traps set. */
+ /* Restore SYSENTER if it's supposed to be on. */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+
/* If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
@@ -203,13 +207,12 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
/* Similarly, if we took a trap because the Guest used the FPU,
- * we have to restore the FPU it expects to see. */
+ * we have to restore the FPU it expects to see.
+ * math_state_restore() may sleep and we may even move off to
+ * a different CPU. So all the critical stuff should be done
+ * before this. */
else if (cpu->regs->trapnum == 7)
math_state_restore();
-
- /* Restore SYSENTER if it's supposed to be on. */
- if (boot_cpu_has(X86_FEATURE_SEP))
- wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
}
/*H:130 Now we've examined the hypercall code; our Guest can make requests.
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 82add26cc66..818aba36854 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -84,7 +84,7 @@ struct media_bay_info {
int cd_irq;
int cd_retry;
#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY)
+#if defined(CONFIG_BLK_DEV_IDE_PMAC)
int cd_index;
#endif
};
@@ -417,6 +417,7 @@ static void poll_media_bay(struct media_bay_info* bay)
}
}
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay(struct device_node *which_bay, int what)
{
int i;
@@ -432,7 +433,6 @@ int check_media_bay(struct device_node *which_bay, int what)
}
EXPORT_SYMBOL(check_media_bay);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay_by_base(unsigned long base, int what)
{
int i;
@@ -556,7 +556,8 @@ static void media_bay_step(int i)
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
ide_port_scan(bay->cd_port);
- bay->cd_index = bay->cd_port->index;
+ if (bay->cd_port->present)
+ bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 77ad192962c..d86d57af282 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -483,12 +483,15 @@ int __init smu_init (void)
if (smu_cmdbuf_abs == 0) {
printk(KERN_ERR "SMU: Command buffer not allocated !\n");
+ of_node_put(np);
return -EINVAL;
}
smu = alloc_bootmem(sizeof(struct smu_device));
- if (smu == NULL)
+ if (smu == NULL) {
+ of_node_put(np);
return -ENOMEM;
+ }
memset(smu, 0, sizeof(*smu));
spin_lock_init(&smu->lock);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 54f4942a296..5366dc93fb3 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -562,18 +562,24 @@ thermostat_init(void)
therm_type = ADT7460;
else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
- else
+ else {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
- if (*prop != 1)
+ if (*prop != 1) {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "reg", NULL);
- if (!prop)
+ if (!prop) {
+ of_node_put(np);
return -ENODEV;
+ }
/* look for bus either by path or using "reg" */
if (strstr(np->full_name, "/i2c-bus@") != NULL) {
@@ -610,6 +616,7 @@ thermostat_init(void)
if (of_dev == NULL) {
printk(KERN_ERR "Can't register temperatures device !\n");
+ of_node_put(np);
return -ENODEV;
}
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 835def11419..ab6a61db63c 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -432,6 +432,7 @@ static int crypt_convert(struct crypt_config *cc,
case 0:
atomic_dec(&ctx->pending);
ctx->sector++;
+ cond_resched();
continue;
/* error */
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7cf512a34cc..2580ac1b9b0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3897,8 +3897,10 @@ static void autorun_devices(int part)
md_probe(dev, NULL, NULL);
mddev = mddev_find(dev);
- if (!mddev) {
- printk(KERN_ERR
+ if (!mddev || !mddev->gendisk) {
+ if (mddev)
+ mddev_put(mddev);
+ printk(KERN_ERR
"md: cannot allocate memory for md drive.\n");
break;
}
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 1de17da34a9..a71277b640a 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2137,6 +2137,8 @@ static int run(mddev_t *mddev)
!test_bit(In_sync, &disk->rdev->flags)) {
disk->head_position = 0;
mddev->degraded++;
+ if (disk->rdev)
+ conf->fullsync = 1;
}
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c37e256b117..54c8ee28fcc 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2898,6 +2898,8 @@ static void handle_stripe5(struct stripe_head *sh)
for (i = conf->raid_disks; i--; ) {
set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
sh->ops.count++;
}
@@ -2911,6 +2913,7 @@ static void handle_stripe5(struct stripe_head *sh)
conf->raid_disks);
s.locked += handle_write_operations5(sh, 1, 1);
} else if (s.expanded &&
+ s.locked == 0 &&
!test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
@@ -4305,7 +4308,9 @@ static int run(mddev_t *mddev)
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
working_disks++;
- }
+ } else
+ /* Cannot rely on bitmap to complete recovery */
+ conf->fullsync = 1;
}
/*
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index a3485817e46..8fa91f846d5 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -2201,3 +2201,41 @@ IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = {
[0x25] = KEY_POWER, /* power */
};
EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel);
+
+IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
+ [0x20] = KEY_LIST,
+ [0x00] = KEY_POWER,
+ [0x28] = KEY_1,
+ [0x18] = KEY_2,
+ [0x38] = KEY_3,
+ [0x24] = KEY_4,
+ [0x14] = KEY_5,
+ [0x34] = KEY_6,
+ [0x2c] = KEY_7,
+ [0x1c] = KEY_8,
+ [0x3c] = KEY_9,
+ [0x12] = KEY_SUBTITLE,
+ [0x22] = KEY_0,
+ [0x32] = KEY_REWIND,
+ [0x3a] = KEY_SHUFFLE,
+ [0x02] = KEY_PRINT,
+ [0x11] = KEY_CHANNELDOWN,
+ [0x31] = KEY_CHANNELUP,
+ [0x0c] = KEY_ZOOM,
+ [0x1e] = KEY_VOLUMEDOWN,
+ [0x3e] = KEY_VOLUMEUP,
+ [0x0a] = KEY_MUTE,
+ [0x04] = KEY_AUDIO,
+ [0x26] = KEY_RECORD,
+ [0x06] = KEY_PLAY,
+ [0x36] = KEY_STOP,
+ [0x16] = KEY_PAUSE,
+ [0x2e] = KEY_REWIND,
+ [0x0e] = KEY_FASTFORWARD,
+ [0x30] = KEY_TEXT,
+ [0x21] = KEY_GREEN,
+ [0x01] = KEY_BLUE,
+ [0x08] = KEY_EPG,
+ [0x2a] = KEY_MENU,
+};
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d);
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index f1894fec32b..6fb5b458656 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -649,9 +649,17 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq)
u8 val;
int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range
+ * for frequencies above 61.1 MHz. In these cases, the internal RF
+ * tracking filters calibration mechanism is used.
+ *
+ * There is no need to warn the user about this.
+ */
+ if (ret < 0)
+ goto fail;
regs[R_EB14] = val;
-
+fail:
return ret;
}
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 89c01fb1f85..93063c6fbbf 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -45,6 +45,21 @@ static inline int charge_pump_source(struct dvb_frontend *fe, int force)
TDA18271_MAIN_PLL, force);
}
+static inline void tda18271_set_if_notch(struct dvb_frontend *fe)
+{
+ struct tda18271_priv *priv = fe->tuner_priv;
+ unsigned char *regs = priv->tda18271_regs;
+
+ switch (priv->mode) {
+ case TDA18271_ANALOG:
+ regs[R_MPD] &= ~0x80; /* IF notch = 0 */
+ break;
+ case TDA18271_DIGITAL:
+ regs[R_MPD] |= 0x80; /* IF notch = 1 */
+ break;
+ }
+}
+
static int tda18271_channel_configuration(struct dvb_frontend *fe,
struct tda18271_std_map_item *map,
u32 freq, u32 bw)
@@ -60,25 +75,18 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe,
regs[R_EP3] &= ~0x1f; /* clear std bits */
regs[R_EP3] |= (map->agc_mode << 3) | map->std;
- /* set rfagc to high speed mode */
- regs[R_EP3] &= ~0x04;
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to high speed mode */
+ regs[R_EP3] &= ~0x04;
+ }
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
regs[R_EP4] |= (map->if_lvl << 2);
- switch (priv->mode) {
- case TDA18271_ANALOG:
- regs[R_MPD] &= ~0x80; /* IF notch = 0 */
- break;
- case TDA18271_DIGITAL:
- regs[R_MPD] |= 0x80; /* IF notch = 1 */
- break;
- }
-
/* update FM_RFn */
regs[R_EP4] &= ~0x80;
regs[R_EP4] |= map->fm_rfn << 7;
@@ -95,6 +103,9 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe,
/* disable Power Level Indicator */
regs[R_EP1] |= 0x40;
+ /* make sure thermometer is off */
+ regs[R_TM] &= ~0x10;
+
/* frequency dependent parameters */
tda18271_calc_ir_measure(fe, &freq);
@@ -135,6 +146,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe,
switch (priv->role) {
case TDA18271_MASTER:
tda18271_calc_main_pll(fe, N);
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 4);
break;
case TDA18271_SLAVE:
@@ -142,6 +154,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe,
tda18271_write_regs(fe, R_CPD, 4);
regs[R_MPD] = regs[R_CPD] & 0x7f;
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 1);
break;
}
@@ -160,12 +173,14 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe,
msleep(20);
- /* set rfagc to normal speed mode */
- if (map->fm_rfn)
- regs[R_EP3] &= ~0x04;
- else
- regs[R_EP3] |= 0x04;
- ret = tda18271_write_regs(fe, R_EP3, 1);
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to normal speed mode */
+ if (map->fm_rfn)
+ regs[R_EP3] &= ~0x04;
+ else
+ regs[R_EP3] |= 0x04;
+ ret = tda18271_write_regs(fe, R_EP3, 1);
+ }
fail:
return ret;
}
@@ -507,7 +522,7 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe)
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
ret = tda18271_write_regs(fe, R_EP3, 2);
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index ceae6db901e..7cf4f5bdb2e 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -177,6 +177,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
{"FM Radio-INPUT1", 0x0208, 0x9002}
};
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static void xc5000_TunerReset(struct dvb_frontend *fe);
@@ -352,7 +353,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv,
static int xc_shutdown(struct xc5000_priv *priv)
{
- return 0;
+ return XC_RESULT_SUCCESS;
/* Fixme: cannot bring tuner back alive once shutdown
* without reloading the driver modules.
* return xc_write_reg(priv, XREG_POWER_DOWN, 0);
@@ -685,6 +686,25 @@ static int xc5000_set_params(struct dvb_frontend *fe,
return 0;
}
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret;
+ u16 id;
+
+ ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
+ if (ret == XC_RESULT_SUCCESS) {
+ if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
+ ret = XC_RESULT_RESET_FAILURE;
+ else
+ ret = XC_RESULT_SUCCESS;
+ }
+
+ dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
+ ret == XC_RESULT_SUCCESS ? "True" : "False", id);
+ return ret;
+}
+
static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
static int xc5000_set_analog_params(struct dvb_frontend *fe,
@@ -693,7 +713,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe,
struct xc5000_priv *priv = fe->tuner_priv;
int ret;
- if(priv->fwloaded == 0)
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
xc_load_fw_and_init_tuner(fe);
dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
@@ -808,11 +828,10 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
struct xc5000_priv *priv = fe->tuner_priv;
int ret = 0;
- if (priv->fwloaded == 0) {
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
ret = xc5000_fwupload(fe);
if (ret != XC_RESULT_SUCCESS)
return ret;
- priv->fwloaded = 1;
}
/* Start the tuner self-calibration process */
@@ -852,7 +871,6 @@ static int xc5000_sleep(struct dvb_frontend *fe)
return -EREMOTEIO;
}
else {
- /* priv->fwloaded = 0; */
return XC_RESULT_SUCCESS;
}
}
@@ -933,7 +951,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has been loaded previously\n");
- priv->fwloaded = 1;
break;
case XC_PRODUCT_ID_FW_NOT_LOADED:
printk(KERN_INFO
@@ -941,7 +958,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has not been loaded previously\n");
- priv->fwloaded = 0;
break;
default:
printk(KERN_ERR
diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h
index ecebfe4745a..a72a9887fe7 100644
--- a/drivers/media/common/tuners/xc5000_priv.h
+++ b/drivers/media/common/tuners/xc5000_priv.h
@@ -30,7 +30,6 @@ struct xc5000_priv {
u32 bandwidth;
u8 video_standard;
u8 rf_mode;
- u8 fwloaded;
void *devptr;
};
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index 0a8ac64a4e3..037f7ffb47b 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -47,6 +47,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
return -EINVAL;
}
+ msleep(1); /* avoid I2C errors */
+
return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
value, index, rbuf, rlen, 2000);
}
@@ -92,16 +94,6 @@ static struct i2c_algorithm gl861_i2c_algo = {
};
/* Callbacks for DVB USB */
-static int gl861_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc,
- int *cold)
-{
- *cold = 0;
-
- return 0;
-}
-
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x0f,
.no_tuner = 1,
@@ -172,7 +164,6 @@ static struct dvb_usb_device_properties gl861_properties = {
.size_of_priv = 0,
- .identify_state = gl861_identify_state,
.num_adapters = 1,
.adapter = {{
@@ -194,13 +185,15 @@ static struct dvb_usb_device_properties gl861_properties = {
.num_device_descs = 2,
.devices = {
- { "MSI Mega Sky 55801 DVB-T USB2.0",
- { &gl861_table[0], NULL },
- { NULL },
+ {
+ .name = "MSI Mega Sky 55801 DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[0], NULL },
},
- { "A-LINK DTU DVB-T USB2.0",
- { &gl861_table[1], NULL },
- { NULL },
+ {
+ .name = "A-LINK DTU DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[1], NULL },
},
}
};
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
index 9e7653bb3b6..118aab1a3e5 100644
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ b/drivers/media/dvb/dvb-usb/umt-010.c
@@ -107,7 +107,7 @@ static struct dvb_usb_device_properties umt_properties = {
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 20,
+ .count = MAX_NO_URBS_FOR_DATA_STREAM,
.endpoint = 0x06,
.u = {
.bulk = {
diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 084a280c2d7..03900d241a7 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -463,10 +463,13 @@ static int au8522_set_frontend(struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
struct au8522_state *state = fe->demodulator_priv;
+ int ret = -EINVAL;
dprintk("%s(frequency=%d)\n", __func__, p->frequency);
- state->current_frequency = p->frequency;
+ if ((state->current_frequency == p->frequency) &&
+ (state->current_modulation == p->u.vsb.modulation))
+ return 0;
au8522_enable_modulation(fe, p->u.vsb.modulation);
@@ -476,11 +479,16 @@ static int au8522_set_frontend(struct dvb_frontend *fe,
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- fe->ops.tuner_ops.set_params(fe, p);
+ ret = fe->ops.tuner_ops.set_params(fe, p);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
+ if (ret < 0)
+ return ret;
+
+ state->current_frequency = p->frequency;
+
return 0;
}
@@ -498,6 +506,16 @@ static int au8522_init(struct dvb_frontend *fe)
return 0;
}
+static int au8522_sleep(struct dvb_frontend *fe)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __func__);
+
+ state->current_frequency = 0;
+
+ return 0;
+}
+
static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct au8522_state *state = fe->demodulator_priv;
@@ -509,10 +527,8 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
if (state->current_modulation == VSB_8) {
dprintk("%s() Checking VSB_8\n", __func__);
reg = au8522_readreg(state, 0x4088);
- if (reg & 0x01)
- *status |= FE_HAS_VITERBI;
- if (reg & 0x02)
- *status |= FE_HAS_LOCK | FE_HAS_SYNC;
+ if ((reg & 0x03) == 0x03)
+ *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
} else {
dprintk("%s() Checking QAM\n", __func__);
reg = au8522_readreg(state, 0x4541);
@@ -672,6 +688,7 @@ static struct dvb_frontend_ops au8522_ops = {
},
.init = au8522_init,
+ .sleep = au8522_sleep,
.i2c_gate_ctrl = au8522_i2c_gate_ctrl,
.set_frontend = au8522_set_frontend,
.get_frontend = au8522_get_frontend,
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 17556183e87..35435bef8e7 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -63,6 +63,7 @@ struct stv0299_state {
u32 symbol_rate;
fe_code_rate_t fec_inner;
int errmode;
+ u32 ucblocks;
};
#define STATUS_BER 0
@@ -501,8 +502,10 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_BER) return 0;
- *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_BER)
+ return -ENOSYS;
+
+ *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8);
return 0;
}
@@ -540,8 +543,12 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
- else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_UCBLOCKS)
+ return -ENOSYS;
+
+ state->ucblocks += stv0299_readreg(state, 0x1e);
+ state->ucblocks += (stv0299_readreg(state, 0x1d) << 8);
+ *ucblocks = state->ucblocks;
return 0;
}
diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c
index 0727b80bc4d..c6ff5b82ff8 100644
--- a/drivers/media/dvb/frontends/tda10023.c
+++ b/drivers/media/dvb/frontends/tda10023.c
@@ -116,9 +116,12 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg)
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
- if (ret != 2)
- printk("DVB: TDA10023: %s: readreg error (ret == %i)\n",
- __func__, ret);
+ if (ret != 2) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error "
+ "(reg == 0x%02x, ret == %i)\n",
+ num, __func__, reg, ret);
+ }
return b1[0];
}
@@ -129,11 +132,12 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data)
int ret;
ret = i2c_transfer (state->i2c, &msg, 1);
- if (ret != 1)
- printk("DVB: TDA10023(%d): %s, writereg error "
+ if (ret != 1) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error "
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
- state->frontend.dvb->num, __func__, reg, data, ret);
-
+ num, __func__, reg, data, ret);
+ }
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -464,7 +468,7 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config,
int i;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 49973846373..a0d63865356 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -1248,11 +1248,14 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
@@ -1260,7 +1263,15 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
state->demod_type = TDA1004X_DEMOD_TDA10045;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+
+ if (id != 0x25) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
@@ -1307,11 +1318,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
@@ -1319,7 +1333,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
state->demod_type = TDA1004X_DEMOD_TDA10046;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+ if (id != 0x46) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index d4339b1b3b6..07643e01009 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -101,6 +101,7 @@ config DVB_BUDGET
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
depends on DVB_BUDGET_CORE && I2C
+ depends on INPUT # due to IR
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 9d81074b31d..3a3f5279e92 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -427,6 +427,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
if (err) {
printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n",
__func__, type);
+ av7110->arm_errors++;
return -ETIMEDOUT;
}
msleep(1);
@@ -853,10 +854,8 @@ static osd_raw_window_t bpp2bit[8] = {
static inline int WaitUntilBmpLoaded(struct av7110 *av7110)
{
- int ret = wait_event_interruptible_timeout(av7110->bmpq,
+ int ret = wait_event_timeout(av7110->bmpq,
av7110->bmp_state != BMP_LOADING, 10*HZ);
- if (ret == -ERESTARTSYS)
- return ret;
if (ret == 0) {
printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n",
ret, av7110->bmp_state);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 3b26fbd3e55..5ccb0aeca8c 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -793,6 +793,14 @@ menuconfig V4L_USB_DRIVERS
if V4L_USB_DRIVERS && USB
+config USB_VIDEO_CLASS
+ tristate "USB Video Class (UVC)"
+ ---help---
+ Support for the USB Video Class (UVC). Currently only video
+ input devices, such as webcams, are supported.
+
+ For more information see: <http://linux-uvc.berlios.de/>
+
source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index dff0d6abe91..ecbbfaab24d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -136,6 +136,8 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o
obj-$(CONFIG_VIDEO_AU0828) += au0828/
+obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index a2a6983444f..898e12395e7 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -77,8 +77,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
/* Make sure we support the board model */
switch (tv.model) {
+ case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
+ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
+ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
printk(KERN_WARNING "%s: warning: "
@@ -175,6 +181,18 @@ struct usb_device_id au0828_usb_id_table [] = {
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
{ USB_DEVICE(0x0fe9, 0xd620),
.driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
+ { USB_DEVICE(0x2040, 0x7210),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7217),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721b),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721f),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7280),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x0fd9, 0x0008),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
{ },
};
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 5f942690570..9aefdc5ea79 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -10,8 +10,8 @@ config VIDEO_CX18
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CS5345
- select DVB_S5H1409
- select MEDIA_TUNER_MXL5005S
+ select DVB_S5H1409 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 9a26751615c..faca43eb940 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -69,6 +69,58 @@ int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
or_value);
}
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask)
+{
+ int retval;
+ u32 saved_reg[8] = {0};
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL);
+ saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1);
+ saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL);
+ saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL);
+ saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG);
+ saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG);
+ }
+
+ retval = cx18_av_write(cx, addr, value);
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]);
+ cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]);
+ cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]);
+ cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]);
+ cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]);
+ cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]);
+ }
+
+ return retval;
+}
+
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask,
+ u8 or_value, int no_acfg_mask)
+{
+ return cx18_av_write_no_acfg(cx, addr,
+ (cx18_av_read(cx, addr) & and_mask) |
+ or_value, no_acfg_mask);
+}
+
/* ----------------------------------------------------------------------- */
static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
@@ -170,13 +222,15 @@ static void input_change(struct cx18 *cx)
/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
if (std & V4L2_STD_SECAM)
- cx18_av_write(cx, 0x402, 0);
+ cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL);
else {
- cx18_av_write(cx, 0x402, 0x04);
+ cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL);
cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
}
- cx18_av_and_or(cx, 0x401, ~0x60, 0);
- cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
if (std & V4L2_STD_525_60) {
if (std == V4L2_STD_NTSC_M_JP) {
@@ -228,7 +282,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
if ((vid_input & ~0xff0) ||
luma < CX18_AV_SVIDEO_LUMA1 ||
- luma > CX18_AV_SVIDEO_LUMA4 ||
+ luma > CX18_AV_SVIDEO_LUMA8 ||
chroma < CX18_AV_SVIDEO_CHROMA4 ||
chroma > CX18_AV_SVIDEO_CHROMA8) {
CX18_ERR("0x%04x is not a valid video input!\n",
@@ -262,7 +316,8 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
cx18_av_write(cx, 0x103, reg);
/* Set INPUT_MODE to Composite (0) or S-Video (1) */
- cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
@@ -318,12 +373,12 @@ static int set_v4lstd(struct cx18 *cx)
This happens for example with the Yuan MPC622. */
if (fmt >= 4 && fmt < 8) {
/* Set format to NTSC-M */
- cx18_av_and_or(cx, 0x400, ~0xf, 1);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE);
/* Turn off LCOMB */
cx18_av_and_or(cx, 0x47b, ~6, 0);
}
- cx18_av_and_or(cx, 0x400, ~0xf, fmt);
- cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE);
+ cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL);
cx18_av_vbi_setup(cx);
input_change(cx);
return 0;
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 786901d72e9..c172823ce1d 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -37,12 +37,16 @@ enum cx18_av_video_input {
CX18_AV_COMPOSITE7,
CX18_AV_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX18_AV_SVIDEO_LUMA1 = 0x10,
CX18_AV_SVIDEO_LUMA2 = 0x20,
CX18_AV_SVIDEO_LUMA3 = 0x30,
CX18_AV_SVIDEO_LUMA4 = 0x40,
+ CX18_AV_SVIDEO_LUMA5 = 0x50,
+ CX18_AV_SVIDEO_LUMA6 = 0x60,
+ CX18_AV_SVIDEO_LUMA7 = 0x70,
+ CX18_AV_SVIDEO_LUMA8 = 0x80,
CX18_AV_SVIDEO_CHROMA4 = 0x400,
CX18_AV_SVIDEO_CHROMA5 = 0x500,
CX18_AV_SVIDEO_CHROMA6 = 0x600,
@@ -291,14 +295,24 @@ struct cx18_av_state {
#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */
#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */
+/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/
+#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */
+#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */
+#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */
+#define CXADEC_NO_ACFG_ALL 0x07
+
/* ----------------------------------------------------------------------- */
/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value,
+ int no_acfg_mask);
u8 cx18_av_read(struct cx18 *cx, u16 addr);
u32 cx18_av_read4(struct cx18 *cx, u16 addr);
int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value,
+ int no_acfg_mask);
int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index baccd079243..c26e0ef5b07 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -23,6 +23,7 @@
#include "cx18-driver.h"
#include "cx18-cards.h"
+#include "cx18-av-core.h"
#include "cx18-i2c.h"
#include <media/cs5345.h>
@@ -54,22 +55,22 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* ESMT M13S128324A-5B memory */
.chip_config = 0x003,
@@ -81,6 +82,11 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
@@ -94,22 +100,22 @@ static const struct cx18_card cx18_card_hvr1600_samsung = {
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* Samsung K4D263238G-VC33 memory */
.chip_config = 0x003,
@@ -121,6 +127,11 @@ static const struct cx18_card cx18_card_hvr1600_samsung = {
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
@@ -141,19 +152,19 @@ static const struct cx18_card cx18_card_h900 = {
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
- CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 },
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
+ CX18_AV_AUDIO8, 0 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
@@ -183,23 +194,26 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = {
static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
.name = "Yuan MPC718",
- .comment = "Not yet supported!\n",
- .v4l2_capabilities = 0,
+ .comment = "Some Composite and S-Video inputs are currently working.\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+ { CX18_CARD_INPUT_SVIDEO2, 2,
+ CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+ { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
- { CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 },
},
- .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index bccb67f0db1..dc2dd945d4c 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -36,36 +36,6 @@
#define CX18_CARD_INPUT_COMPOSITE2 5
#define CX18_CARD_INPUT_COMPOSITE3 6
-enum cx34180_video_input {
- /* Composite video inputs In1-In8 */
- CX23418_COMPOSITE1 = 1,
- CX23418_COMPOSITE2,
- CX23418_COMPOSITE3,
- CX23418_COMPOSITE4,
- CX23418_COMPOSITE5,
- CX23418_COMPOSITE6,
- CX23418_COMPOSITE7,
- CX23418_COMPOSITE8,
-
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
- chroma input (In5-In8) */
- CX23418_SVIDEO_LUMA1 = 0x10,
- CX23418_SVIDEO_LUMA2 = 0x20,
- CX23418_SVIDEO_LUMA3 = 0x30,
- CX23418_SVIDEO_LUMA4 = 0x40,
- CX23418_SVIDEO_CHROMA4 = 0x400,
- CX23418_SVIDEO_CHROMA5 = 0x500,
- CX23418_SVIDEO_CHROMA6 = 0x600,
- CX23418_SVIDEO_CHROMA7 = 0x700,
- CX23418_SVIDEO_CHROMA8 = 0x800,
-
- /* S-Video aliases for common luma/chroma combinations */
- CX23418_SVIDEO1 = 0x510,
- CX23418_SVIDEO2 = 0x620,
- CX23418_SVIDEO3 = 0x730,
- CX23418_SVIDEO4 = 0x840,
-};
-
/* audio inputs */
#define CX18_CARD_INPUT_AUD_TUNER 1
#define CX18_CARD_INPUT_LINE_IN1 2
@@ -75,16 +45,6 @@ enum cx34180_video_input {
#define CX18_CARD_MAX_AUDIO_INPUTS 3
#define CX18_CARD_MAX_TUNERS 2
-enum cx23418_audio_input {
- /* Audio inputs: serial or In4-In8 */
- CX23418_AUDIO_SERIAL,
- CX23418_AUDIO4 = 4,
- CX23418_AUDIO5,
- CX23418_AUDIO6,
- CX23418_AUDIO7,
- CX23418_AUDIO8,
-};
-
/* V4L2 capability aliases */
#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
V4L2_CAP_AUDIO | V4L2_CAP_READWRITE)
@@ -118,6 +78,13 @@ struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
u32 initial_value;
};
+struct cx18_gpio_i2c_slave_reset {
+ u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+ u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+ int msecs_asserted; /* time period reset must remain asserted */
+ int msecs_recovery; /* time after deassert for chips to be ready */
+};
+
struct cx18_card_tuner {
v4l2_std_id std; /* standard for which the tuner is suitable */
int tuner; /* tuner ID (from tuner.h) */
@@ -154,7 +121,8 @@ struct cx18_card {
/* GPIO card-specific settings */
u8 xceive_pin; /* XCeive tuner GPIO reset pin */
- struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
struct cx18_card_tuner_i2c *i2c;
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index c9744173f96..cae38985b13 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -69,11 +69,21 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
struct cx18 *cx = stream->cx;
- int ret = -EINVAL;
+ int ret;
u32 v;
CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
+
+ mutex_lock(&cx->serialize_lock);
+ ret = cx18_init_on_first_open(cx);
+ mutex_unlock(&cx->serialize_lock);
+ if (ret) {
+ CX18_ERR("Failed to initialize firmware starting DVB feed\n");
+ return ret;
+ }
+ ret = -EINVAL;
+
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
@@ -101,6 +111,11 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
if (stream->dvb.feeding++ == 0) {
CX18_DEBUG_INFO("Starting Transport DMA\n");
ret = cx18_start_v4l2_encode_stream(stream);
+ if (ret < 0) {
+ CX18_DEBUG_INFO(
+ "Failed to start Transport DMA\n");
+ stream->dvb.feeding--;
+ }
} else
ret = 0;
mutex_unlock(&stream->dvb.feedlock);
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index ceb63653c92..b302833f6f9 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -53,10 +53,34 @@ static void gpio_write(struct cx18 *cx)
write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
CX18_REG_GPIO_OUT1);
write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
- write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
+ write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
CX18_REG_GPIO_OUT2);
}
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
+{
+ const struct cx18_gpio_i2c_slave_reset *p;
+
+ p = &cx->card->gpio_i2c_slave_reset;
+
+ if ((p->active_lo_mask | p->active_hi_mask) == 0)
+ return;
+
+ /* Assuming that the masks are a subset of the bits in gpio_dir */
+
+ /* Assert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted));
+
+ /* Deassert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery));
+}
+
void cx18_gpio_init(struct cx18 *cx)
{
cx->gpio_dir = cx->card->gpio_init.direction;
diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index 41bac8856b5..525c328f748 100644
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -21,4 +21,5 @@
*/
void cx18_gpio_init(struct cx18 *cx);
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx);
int cx18_reset_tuner_gpio(void *dev, int cmd, int value);
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 1d6c51a7531..680bc4e35b7 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -405,6 +405,8 @@ int init_cx18_i2c(struct cx18 *cx)
cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
+ cx18_reset_i2c_slaves_gpio(cx);
+
return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
i2c_bit_add_bus(&cx->i2c_adap[1]);
}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 607efdcd22f..1da6f134888 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -433,7 +433,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
int chroma = vid_input & 0xf00;
if ((vid_input & ~0xff0) ||
- luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 ||
+ luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 ||
chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
v4l_err(client, "0x%04x is not a valid video input!\n",
vid_input);
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index e976fc6bef7..80c8883e54b 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -332,6 +332,12 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
+ if (!chip) {
+ printk(KERN_ERR "BUG: cx88 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS);
if (err < 0)
goto _error;
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 92b2a6db4fd..3c006103c1e 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -268,6 +268,12 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream)
dprintk("opening device and trying to acquire exclusive lock\n");
+ if (!dev) {
+ printk(KERN_ERR "BUG: em28xx can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
/* Sets volume, mute, etc */
dev->mute = 0;
@@ -415,6 +421,12 @@ static int em28xx_audio_init(struct em28xx *dev)
static int devnr;
int ret, err;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
printk(KERN_INFO "em28xx-audio.c: probing for em28x1 "
"non standard usbaudio\n");
printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus "
@@ -458,6 +470,12 @@ static int em28xx_audio_fini(struct em28xx *dev)
if (dev == NULL)
return 0;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
if (dev->adev) {
snd_card_free(dev->adev->sndcard);
kfree(dev->adev);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 3e4f3c7e92e..8cbda43727c 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -157,6 +157,7 @@ struct em28xx_board em28xx_boards[] = {
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.mts_firmware = 1,
+ .has_dvb = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -524,6 +525,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (rc > 0) {
switch (rc) {
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
case CHIP_ID_EM2883:
em28xx_info("chip ID is em2882/em2883\n");
dev->wait_after_write = 0;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 8cf4983f003..0b2333ee07f 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -382,6 +382,11 @@ static int dvb_init(struct em28xx *dev)
int result = 0;
struct em28xx_dvb *dvb;
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
@@ -444,6 +449,11 @@ out_free:
static int dvb_fini(struct em28xx *dev)
{
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
if (dev->dvb) {
unregister_dvb(dev->dvb);
dev->dvb = NULL;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 9058bed0795..fac1ab23f62 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -84,5 +84,6 @@
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
+ CHIP_ID_EM2860 = 34,
CHIP_ID_EM2883 = 36,
};
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index fb163ecd921..285bc62bbe4 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1848,32 +1848,28 @@ static DEFINE_MUTEX(em28xx_extension_devlist_lock);
int em28xx_register_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
-
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
+ struct em28xx *dev = NULL;
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
- if (dev)
- ops->init(dev);
-
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->init(dev);
+ }
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
-
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
void em28xx_unregister_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
-
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
+ struct em28xx *dev = NULL;
- if (dev)
- ops->fini(dev);
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->fini(dev);
+ }
mutex_lock(&em28xx_extension_devlist_lock);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 7cc8e9b19fb..5ec5bb9a94d 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1019,12 +1019,12 @@ static int pxa_camera_probe(struct platform_device *pdev)
struct pxa_camera_dev *pcdev;
struct resource *res;
void __iomem *base;
- unsigned int irq;
+ int irq;
int err = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || irq < 0) {
err = -ENODEV;
goto exit;
}
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index ba3082422a0..f118de6e367 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -613,9 +613,15 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream)
struct snd_pcm_runtime *runtime = substream->runtime;
snd_card_saa7134_pcm_t *pcm;
snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
- struct saa7134_dev *dev = saa7134->dev;
+ struct saa7134_dev *dev;
int amux, err;
+ if (!saa7134) {
+ printk(KERN_ERR "BUG: saa7134 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+ dev = saa7134->dev;
mutex_lock(&dev->dmasound.lock);
dev->dmasound.read_count = 0;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index b111903aa32..2618cfa592e 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4114,11 +4114,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- /*
- TODO:
.mpeg = SAA7134_MPEG_DVB,
- */
-
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -4157,7 +4153,7 @@ struct saa7134_board saa7134_boards[] = {
} },
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
},
},
[SAA7134_BOARD_AVERMEDIA_M115] = {
@@ -4167,6 +4163,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -5351,22 +5348,21 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev,
{
switch (command) {
case XC2028_TUNER_RESET:
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
- saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
- saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
- saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
- saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
- 0x0001e000, 0x0001e000);
- return 0;
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ switch (dev->board) {
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ break;
+ }
+ return 0;
}
return -EINVAL;
}
@@ -5553,9 +5549,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
- case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
case SAA7134_BOARD_AVERMEDIA_M115:
- case SAA7134_BOARD_AVERMEDIA_A16D:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
@@ -5565,6 +5559,18 @@ int saa7134_board_init1(struct saa7134_dev *dev)
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
msleep(10);
break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ msleep(1);
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004);
@@ -5615,7 +5621,8 @@ int saa7134_board_init1(struct saa7134_dev *dev)
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
printk("%s: %s: hybrid analog/dvb card\n"
- "%s: Sorry, only the analog inputs are supported for now.\n",
+ "%s: Sorry, only analog s-video and composite input "
+ "are supported for now.\n",
dev->name, card(dev).name, dev->name);
break;
}
@@ -5675,6 +5682,7 @@ static void saa7134_tuner_setup(struct saa7134_dev *dev)
switch (dev->board) {
case SAA7134_BOARD_AVERMEDIA_A16D:
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
ctl.demod = XC3028_FE_ZARLINK456;
break;
default:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 469f93aac00..341b101b035 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -153,12 +153,12 @@ static int mt352_aver777_init(struct dvb_frontend* fe)
return 0;
}
-static int mt352_aver_a16d_init(struct dvb_frontend *fe)
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
{
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
- static u8 reset [] = { RESET, 0x80 };
- static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
- static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
mt352_write(fe, clock_config, sizeof(clock_config));
@@ -167,12 +167,9 @@ static int mt352_aver_a16d_init(struct dvb_frontend *fe)
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
return 0;
}
-
-
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
@@ -215,14 +212,10 @@ static struct mt352_config avermedia_777 = {
.demod_init = mt352_aver777_init,
};
-static struct mt352_config avermedia_16d = {
- .demod_address = 0xf,
- .demod_init = mt352_aver_a16d_init,
-};
-
-static struct mt352_config avermedia_e506r_mt352_dev = {
+static struct mt352_config avermedia_xc3028_mt352_dev = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
};
/* ==================================================================
@@ -975,9 +968,10 @@ static int dvb_init(struct saa7134_dev *dev)
}
break;
case SAA7134_BOARD_AVERMEDIA_A16D:
- dprintk("avertv A16D dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d,
- &dev->i2c_adap);
+ dprintk("AverMedia A16D dvb setup\n");
+ dev->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
break;
case SAA7134_BOARD_MD7134:
@@ -1091,7 +1085,8 @@ static int dvb_init(struct saa7134_dev *dev)
ads_tech_duo_config.tuner_address);
goto dettach_frontend;
}
- }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
@@ -1260,11 +1255,14 @@ static int dvb_init(struct saa7134_dev *dev)
goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
dev->dvb.frontend = dvb_attach(mt352_attach,
- &avermedia_e506r_mt352_dev,
- &dev->i2c_adap);
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
- break;
case SAA7134_BOARD_MD7134_BRIDGE_2:
dev->dvb.frontend = dvb_attach(tda10086_attach,
&sd1878_4m, &dev->i2c_adap);
@@ -1338,7 +1336,8 @@ static int dvb_init(struct saa7134_dev *dev)
return ret;
dettach_frontend:
- dvb_frontend_detach(dev->dvb.frontend);
+ if (dev->dvb.frontend)
+ dvb_frontend_detach(dev->dvb.frontend);
dev->dvb.frontend = NULL;
return -1;
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 81431ee4184..3ae71a34082 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -110,9 +110,10 @@ static int ts_release(struct inode *inode, struct file *file)
{
struct saa7134_dev *dev = file->private_data;
+ mutex_lock(&dev->empress_tsq.vb_lock);
+
videobuf_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
- dev->empress_users--;
/* stop the encoder */
ts_reset_encoder(dev);
@@ -121,6 +122,10 @@ static int ts_release(struct inode *inode, struct file *file)
saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
+ dev->empress_users--;
+
+ mutex_unlock(&dev->empress_tsq.vb_lock);
+
return 0;
}
@@ -218,8 +223,7 @@ static int empress_enum_fmt_cap(struct file *file, void *priv,
static int empress_g_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f);
@@ -232,8 +236,7 @@ static int empress_g_fmt_cap(struct file *file, void *priv,
static int empress_s_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f);
@@ -247,8 +250,7 @@ static int empress_s_fmt_cap(struct file *file, void *priv,
static int empress_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *p)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_reqbufs(&dev->empress_tsq, p);
}
@@ -256,24 +258,21 @@ static int empress_reqbufs(struct file *file, void *priv,
static int empress_querybuf(struct file *file, void *priv,
struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_querybuf(&dev->empress_tsq, b);
}
static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_qbuf(&dev->empress_tsq, b);
}
static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_dqbuf(&dev->empress_tsq, b,
file->f_flags & O_NONBLOCK);
@@ -282,8 +281,7 @@ static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
static int empress_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamon(&dev->empress_tsq);
}
@@ -291,8 +289,7 @@ static int empress_streamon(struct file *file, void *priv,
static int empress_streamoff(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamoff(&dev->empress_tsq);
}
@@ -300,8 +297,7 @@ static int empress_streamoff(struct file *file, void *priv,
static int empress_s_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
/* count == 0 is abused in saa6752hs.c, so that special
case is handled here explicitly. */
@@ -320,8 +316,7 @@ static int empress_s_ext_ctrls(struct file *file, void *priv,
static int empress_g_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 919632b10aa..76e6501d238 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -323,6 +323,15 @@ int saa7134_input_init1(struct saa7134_dev *dev)
saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ ir_codes = ir_codes_avermedia_a16d;
+ mask_keycode = 0x02F200;
+ mask_keydown = 0x000400;
+ polling = 50; /* ms */
+ /* Without this we won't receive key up events */
+ saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+ saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+ break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001f;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index a1b92446c8b..d015bfe0095 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -763,15 +763,6 @@ static struct device_driver ic_drv = {
.owner = THIS_MODULE,
};
-/*
- * Image capture host - this is a host device, not a bus device, so,
- * no bus reference, no probing.
- */
-static struct class soc_camera_host_class = {
- .owner = THIS_MODULE,
- .name = "camera_host",
-};
-
static void dummy_release(struct device *dev)
{
}
@@ -801,7 +792,6 @@ int soc_camera_host_register(struct soc_camera_host *ici)
/* Number might be equal to the platform device ID */
sprintf(ici->dev.bus_id, "camera_host%d", ici->nr);
- ici->dev.class = &soc_camera_host_class;
mutex_lock(&list_lock);
list_for_each_entry(ix, &hosts, list) {
@@ -1003,14 +993,9 @@ static int __init soc_camera_init(void)
ret = driver_register(&ic_drv);
if (ret)
goto edrvr;
- ret = class_register(&soc_camera_host_class);
- if (ret)
- goto eclr;
return 0;
-eclr:
- driver_unregister(&ic_drv);
edrvr:
bus_unregister(&soc_camera_bus_type);
return ret;
@@ -1018,7 +1003,6 @@ edrvr:
static void __exit soc_camera_exit(void)
{
- class_unregister(&soc_camera_host_class);
driver_unregister(&ic_drv);
bus_unregister(&soc_camera_bus_type);
}
diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile
new file mode 100644
index 00000000000..968c1994eda
--- /dev/null
+++ b/drivers/media/video/uvc/Makefile
@@ -0,0 +1,3 @@
+uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \
+ uvc_status.o uvc_isight.o
+obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
new file mode 100644
index 00000000000..f0ee46d1554
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -0,0 +1,1256 @@
+/*
+ * uvc_ctrl.c -- USB Video Class driver - Controls
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include "uvcvideo.h"
+
+#define UVC_CTRL_NDATA 2
+#define UVC_CTRL_DATA_CURRENT 0
+#define UVC_CTRL_DATA_BACKUP 1
+
+/* ------------------------------------------------------------------------
+ * Control, formats, ...
+ */
+
+static struct uvc_control_info uvc_ctrls[] = {
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BRIGHTNESS_CONTROL,
+ .index = 0,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_CONTRAST_CONTROL,
+ .index = 1,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_CONTROL,
+ .index = 2,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SATURATION_CONTROL,
+ .index = 3,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SHARPNESS_CONTROL,
+ .index = 4,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAMMA_CONTROL,
+ .index = 5,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BACKLIGHT_COMPENSATION_CONTROL,
+ .index = 8,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAIN_CONTROL,
+ .index = 9,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_POWER_LINE_FREQUENCY_CONTROL,
+ .index = 10,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_AUTO_CONTROL,
+ .index = 11,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_MODE_CONTROL,
+ .index = 1,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_PRIORITY_CONTROL,
+ .index = 2,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL,
+ .index = 3,
+ .size = 4,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_ABSOLUTE_CONTROL,
+ .index = 5,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_AUTO_CONTROL,
+ .index = 17,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL,
+ .index = 12,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL,
+ .index = 6,
+ .size = 2,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL,
+ .index = 13,
+ .size = 1,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
+ },
+ {
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .index = 7,
+ .size = 4,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
+ | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE,
+ },
+};
+
+static struct uvc_menu_info power_line_frequency_controls[] = {
+ { 0, "Disabled" },
+ { 1, "50 Hz" },
+ { 2, "60 Hz" },
+};
+
+static struct uvc_menu_info exposure_auto_controls[] = {
+ { 1, "Manual Mode" },
+ { 2, "Auto Mode" },
+ { 4, "Shutter Priority Mode" },
+ { 8, "Aperture Priority Mode" },
+};
+
+static struct uvc_control_mapping uvc_ctrl_mappings[] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .name = "Brightness",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BRIGHTNESS_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_CONTRAST,
+ .name = "Contrast",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_CONTRAST_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_HUE,
+ .name = "Hue",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_SATURATION,
+ .name = "Saturation",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SATURATION_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .name = "Sharpness",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_SHARPNESS_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_GAMMA,
+ .name = "Gamma",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAMMA_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_BACKLIGHT_COMPENSATION,
+ .name = "Backlight Compensation",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_BACKLIGHT_COMPENSATION_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_GAIN,
+ .name = "Gain",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_GAIN_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .name = "Power Line Frequency",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_POWER_LINE_FREQUENCY_CONTROL,
+ .size = 2,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_ENUM,
+ .menu_info = power_line_frequency_controls,
+ .menu_count = ARRAY_SIZE(power_line_frequency_controls),
+ },
+ {
+ .id = V4L2_CID_HUE_AUTO,
+ .name = "Hue, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_HUE_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_AUTO,
+ .name = "Exposure, Auto",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_MODE_CONTROL,
+ .size = 4,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_MENU,
+ .data_type = UVC_CTRL_DATA_TYPE_BITMASK,
+ .menu_info = exposure_auto_controls,
+ .menu_count = ARRAY_SIZE(exposure_auto_controls),
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY,
+ .name = "Exposure, Auto Priority",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_AE_PRIORITY_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE_ABSOLUTE,
+ .name = "Exposure (Absolute)",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL,
+ .size = 32,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .name = "White Balance Temperature, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+ .name = "White Balance Temperature",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .name = "White Balance Component, Auto",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .name = "White Balance Blue Component",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .name = "White Balance Red Component",
+ .entity = UVC_GUID_UVC_PROCESSING,
+ .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL,
+ .size = 16,
+ .offset = 16,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_SIGNED,
+ },
+ {
+ .id = V4L2_CID_FOCUS_ABSOLUTE,
+ .name = "Focus (absolute)",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_ABSOLUTE_CONTROL,
+ .size = 16,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_INTEGER,
+ .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
+ },
+ {
+ .id = V4L2_CID_FOCUS_AUTO,
+ .name = "Focus, Auto",
+ .entity = UVC_GUID_UVC_CAMERA,
+ .selector = CT_FOCUS_AUTO_CONTROL,
+ .size = 1,
+ .offset = 0,
+ .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
+ .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
+ },
+};
+
+/* ------------------------------------------------------------------------
+ * Utility functions
+ */
+
+static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id)
+{
+ return ctrl->data + id * ctrl->info->size;
+}
+
+static inline int uvc_get_bit(const __u8 *data, int bit)
+{
+ return (data[bit >> 3] >> (bit & 7)) & 1;
+}
+
+/* Extract the bit string specified by mapping->offset and mapping->size
+ * from the little-endian data stored at 'data' and return the result as
+ * a signed 32bit integer. Sign extension will be performed if the mapping
+ * references a signed data type.
+ */
+static __s32 uvc_get_le_value(const __u8 *data,
+ struct uvc_control_mapping *mapping)
+{
+ int bits = mapping->size;
+ int offset = mapping->offset;
+ __s32 value = 0;
+ __u8 mask;
+
+ data += offset / 8;
+ offset &= 7;
+ mask = ((1LL << bits) - 1) << offset;
+
+ for (; bits > 0; data++) {
+ __u8 byte = *data & mask;
+ value |= offset > 0 ? (byte >> offset) : (byte << (-offset));
+ bits -= 8 - (offset > 0 ? offset : 0);
+ offset -= 8;
+ mask = (1 << bits) - 1;
+ }
+
+ /* Sign-extend the value if needed */
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED)
+ value |= -(value & (1 << (mapping->size - 1)));
+
+ return value;
+}
+
+/* Set the bit string specified by mapping->offset and mapping->size
+ * in the little-endian data stored at 'data' to the value 'value'.
+ */
+static void uvc_set_le_value(__s32 value, __u8 *data,
+ struct uvc_control_mapping *mapping)
+{
+ int bits = mapping->size;
+ int offset = mapping->offset;
+ __u8 mask;
+
+ data += offset / 8;
+ offset &= 7;
+
+ for (; bits > 0; data++) {
+ mask = ((1LL << bits) - 1) << offset;
+ *data = (*data & ~mask) | ((value << offset) & mask);
+ value >>= offset ? offset : 8;
+ bits -= 8 - offset;
+ offset = 0;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * Terminal and unit management
+ */
+
+static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING;
+static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA;
+static const __u8 uvc_media_transport_input_guid[16] =
+ UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT;
+
+static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16])
+{
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case ITT_CAMERA:
+ return memcmp(uvc_camera_guid, guid, 16) == 0;
+
+ case ITT_MEDIA_TRANSPORT_INPUT:
+ return memcmp(uvc_media_transport_input_guid, guid, 16) == 0;
+
+ case VC_PROCESSING_UNIT:
+ return memcmp(uvc_processing_guid, guid, 16) == 0;
+
+ case VC_EXTENSION_UNIT:
+ return memcmp(entity->extension.guidExtensionCode,
+ guid, 16) == 0;
+
+ default:
+ return 0;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * UVC Controls
+ */
+
+static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id,
+ struct uvc_control_mapping **mapping, struct uvc_control **control,
+ int next)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *map;
+ unsigned int i;
+
+ if (entity == NULL)
+ return;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL)
+ continue;
+
+ list_for_each_entry(map, &ctrl->info->mappings, list) {
+ if ((map->id == v4l2_id) && !next) {
+ *control = ctrl;
+ *mapping = map;
+ return;
+ }
+
+ if ((*mapping == NULL || (*mapping)->id > map->id) &&
+ (map->id > v4l2_id) && next) {
+ *control = ctrl;
+ *mapping = map;
+ }
+ }
+ }
+}
+
+struct uvc_control *uvc_find_control(struct uvc_video_device *video,
+ __u32 v4l2_id, struct uvc_control_mapping **mapping)
+{
+ struct uvc_control *ctrl = NULL;
+ struct uvc_entity *entity;
+ int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL;
+
+ *mapping = NULL;
+
+ /* Mask the query flags. */
+ v4l2_id &= V4L2_CTRL_ID_MASK;
+
+ /* Find the control. */
+ __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+
+ list_for_each_entry(entity, &video->iterms, chain) {
+ __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+ }
+
+ list_for_each_entry(entity, &video->extensions, chain) {
+ __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
+ if (ctrl && !next)
+ return ctrl;
+ }
+
+ if (ctrl == NULL && !next)
+ uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n",
+ v4l2_id);
+
+ return ctrl;
+}
+
+int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
+ struct v4l2_queryctrl *v4l2_ctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ struct uvc_menu_info *menu;
+ unsigned int i;
+ __u8 data[8];
+ int ret;
+
+ ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping);
+ if (ctrl == NULL)
+ return -EINVAL;
+
+ v4l2_ctrl->id = mapping->id;
+ v4l2_ctrl->type = mapping->v4l2_type;
+ strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name);
+ v4l2_ctrl->flags = 0;
+
+ if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR))
+ v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_DEF) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->default_value = uvc_get_le_value(data, mapping);
+ }
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ v4l2_ctrl->minimum = 0;
+ v4l2_ctrl->maximum = mapping->menu_count - 1;
+ v4l2_ctrl->step = 1;
+
+ menu = mapping->menu_info;
+ for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ if (menu->value == v4l2_ctrl->default_value) {
+ v4l2_ctrl->default_value = i;
+ break;
+ }
+ }
+
+ return 0;
+ }
+
+ if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->minimum = uvc_get_le_value(data, mapping);
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_MAX) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->maximum = uvc_get_le_value(data, mapping);
+ }
+ if (ctrl->info->flags & UVC_CONTROL_GET_RES) {
+ if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ &data, ctrl->info->size)) < 0)
+ return ret;
+ v4l2_ctrl->step = uvc_get_le_value(data, mapping);
+ }
+
+ return 0;
+}
+
+
+/* --------------------------------------------------------------------------
+ * Control transactions
+ *
+ * To make extended set operations as atomic as the hardware allows, controls
+ * are handled using begin/commit/rollback operations.
+ *
+ * At the beginning of a set request, uvc_ctrl_begin should be called to
+ * initialize the request. This function acquires the control lock.
+ *
+ * When setting a control, the new value is stored in the control data field
+ * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for
+ * later processing. If the UVC and V4L2 control sizes differ, the current
+ * value is loaded from the hardware before storing the new value in the data
+ * field.
+ *
+ * After processing all controls in the transaction, uvc_ctrl_commit or
+ * uvc_ctrl_rollback must be called to apply the pending changes to the
+ * hardware or revert them. When applying changes, all controls marked as
+ * dirty will be modified in the UVC device, and the dirty flag will be
+ * cleared. When reverting controls, the control data field
+ * UVC_CTRL_DATA_CURRENT is reverted to its previous value
+ * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the
+ * control lock.
+ */
+int uvc_ctrl_begin(struct uvc_video_device *video)
+{
+ return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0;
+}
+
+static int uvc_ctrl_commit_entity(struct uvc_device *dev,
+ struct uvc_entity *entity, int rollback)
+{
+ struct uvc_control *ctrl;
+ unsigned int i;
+ int ret;
+
+ if (entity == NULL)
+ return 0;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL || !ctrl->dirty)
+ continue;
+
+ if (!rollback)
+ ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id,
+ dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ else
+ ret = 0;
+
+ if (rollback || ret < 0)
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ ctrl->info->size);
+
+ if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0)
+ ctrl->loaded = 0;
+
+ ctrl->dirty = 0;
+
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback)
+{
+ struct uvc_entity *entity;
+ int ret = 0;
+
+ /* Find the control. */
+ ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback);
+ if (ret < 0)
+ goto done;
+
+ list_for_each_entry(entity, &video->iterms, chain) {
+ ret = uvc_ctrl_commit_entity(video->dev, entity, rollback);
+ if (ret < 0)
+ goto done;
+ }
+
+ list_for_each_entry(entity, &video->extensions, chain) {
+ ret = uvc_ctrl_commit_entity(video->dev, entity, rollback);
+ if (ret < 0)
+ goto done;
+ }
+
+done:
+ mutex_unlock(&video->ctrl_mutex);
+ return ret;
+}
+
+int uvc_ctrl_get(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ struct uvc_menu_info *menu;
+ unsigned int i;
+ int ret;
+
+ ctrl = uvc_find_control(video, xctrl->id, &mapping);
+ if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0)
+ return -EINVAL;
+
+ if (!ctrl->loaded) {
+ ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id,
+ video->dev->intfnum, ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+
+ if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0)
+ ctrl->loaded = 1;
+ }
+
+ xctrl->value = uvc_get_le_value(
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping);
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ menu = mapping->menu_info;
+ for (i = 0; i < mapping->menu_count; ++i, ++menu) {
+ if (menu->value == xctrl->value) {
+ xctrl->value = i;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int uvc_ctrl_set(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl)
+{
+ struct uvc_control *ctrl;
+ struct uvc_control_mapping *mapping;
+ s32 value = xctrl->value;
+ int ret;
+
+ ctrl = uvc_find_control(video, xctrl->id, &mapping);
+ if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0)
+ return -EINVAL;
+
+ if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+ if (value < 0 || value >= mapping->menu_count)
+ return -EINVAL;
+ value = mapping->menu_info[value].value;
+ }
+
+ if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) {
+ if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) {
+ memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ 0, ctrl->info->size);
+ } else {
+ ret = uvc_query_ctrl(video->dev, GET_CUR,
+ ctrl->entity->id, video->dev->intfnum,
+ ctrl->info->selector,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ if (ret < 0)
+ return ret;
+ }
+
+ if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0)
+ ctrl->loaded = 1;
+ }
+
+ if (!ctrl->dirty) {
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ ctrl->info->size);
+ }
+
+ uvc_set_le_value(value,
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping);
+
+ ctrl->dirty = 1;
+ ctrl->modified = 1;
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Dynamic controls
+ */
+
+int uvc_xu_ctrl_query(struct uvc_video_device *video,
+ struct uvc_xu_control *xctrl, int set)
+{
+ struct uvc_entity *entity;
+ struct uvc_control *ctrl = NULL;
+ unsigned int i, found = 0;
+ __u8 *data;
+ int ret;
+
+ /* Find the extension unit. */
+ list_for_each_entry(entity, &video->extensions, chain) {
+ if (entity->id == xctrl->unit)
+ break;
+ }
+
+ if (entity->id != xctrl->unit) {
+ uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n",
+ xctrl->unit);
+ return -EINVAL;
+ }
+
+ /* Find the control. */
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->info == NULL)
+ continue;
+
+ if (ctrl->info->selector == xctrl->selector) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ uvc_trace(UVC_TRACE_CONTROL,
+ "Control " UVC_GUID_FORMAT "/%u not found.\n",
+ UVC_GUID_ARGS(entity->extension.guidExtensionCode),
+ xctrl->selector);
+ return -EINVAL;
+ }
+
+ /* Validate control data size. */
+ if (ctrl->info->size != xctrl->size)
+ return -EINVAL;
+
+ if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) ||
+ (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR)))
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&video->ctrl_mutex))
+ return -ERESTARTSYS;
+
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ xctrl->size);
+ data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT);
+
+ if (set && copy_from_user(data, xctrl->data, xctrl->size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit,
+ video->dev->intfnum, xctrl->selector, data,
+ xctrl->size);
+ if (ret < 0)
+ goto out;
+
+ if (!set && copy_to_user(xctrl->data, data, xctrl->size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+out:
+ if (ret)
+ memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT),
+ uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP),
+ xctrl->size);
+
+ mutex_unlock(&video->ctrl_mutex);
+ return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+/*
+ * Restore control values after resume, skipping controls that haven't been
+ * changed.
+ *
+ * TODO
+ * - Don't restore modified controls that are back to their default value.
+ * - Handle restore order (Auto-Exposure Mode should be restored before
+ * Exposure Time).
+ */
+int uvc_ctrl_resume_device(struct uvc_device *dev)
+{
+ struct uvc_control *ctrl;
+ struct uvc_entity *entity;
+ unsigned int i;
+ int ret;
+
+ /* Walk the entities list and restore controls when possible. */
+ list_for_each_entry(entity, &dev->entities, list) {
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+
+ if (ctrl->info == NULL || !ctrl->modified ||
+ (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0)
+ continue;
+
+ printk(KERN_INFO "restoring control " UVC_GUID_FORMAT
+ "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity),
+ ctrl->info->index, ctrl->info->selector);
+ ctrl->dirty = 1;
+ }
+
+ ret = uvc_ctrl_commit_entity(dev, entity, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Control and mapping handling
+ */
+
+static void uvc_ctrl_add_ctrl(struct uvc_device *dev,
+ struct uvc_control_info *info)
+{
+ struct uvc_entity *entity;
+ struct uvc_control *ctrl = NULL;
+ int ret, found = 0;
+ unsigned int i;
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ if (!uvc_entity_match_guid(entity, info->entity))
+ continue;
+
+ for (i = 0; i < entity->ncontrols; ++i) {
+ ctrl = &entity->controls[i];
+ if (ctrl->index == info->index) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found)
+ return;
+
+ if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) {
+ /* Check if the device control information and length match
+ * the user supplied information.
+ */
+ __u32 flags;
+ __le16 size;
+ __u8 inf;
+
+ if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id,
+ dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) {
+ uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on "
+ "control " UVC_GUID_FORMAT "/%u (%d).\n",
+ UVC_GUID_ARGS(info->entity), info->selector,
+ ret);
+ return;
+ }
+
+ if (info->size != le16_to_cpu(size)) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT
+ "/%u size doesn't match user supplied "
+ "value.\n", UVC_GUID_ARGS(info->entity),
+ info->selector);
+ return;
+ }
+
+ if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id,
+ dev->intfnum, info->selector, &inf, 1)) < 0) {
+ uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on "
+ "control " UVC_GUID_FORMAT "/%u (%d).\n",
+ UVC_GUID_ARGS(info->entity), info->selector,
+ ret);
+ return;
+ }
+
+ flags = info->flags;
+ if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) ||
+ ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u flags don't match "
+ "supported operations.\n",
+ UVC_GUID_ARGS(info->entity), info->selector);
+ return;
+ }
+ }
+
+ ctrl->info = info;
+ ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL);
+ uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u "
+ "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity),
+ ctrl->info->selector, dev->udev->devpath, entity->id);
+}
+
+/*
+ * Add an item to the UVC control information list, and instantiate a control
+ * structure for each device that supports the control.
+ */
+int uvc_ctrl_add_info(struct uvc_control_info *info)
+{
+ struct uvc_control_info *ctrl;
+ struct uvc_device *dev;
+ int ret = 0;
+
+ /* Find matching controls by walking the devices, entities and
+ * controls list.
+ */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+
+ /* First check if the list contains a control matching the new one.
+ * Bail out if it does.
+ */
+ list_for_each_entry(ctrl, &uvc_driver.controls, list) {
+ if (memcmp(ctrl->entity, info->entity, 16))
+ continue;
+
+ if (ctrl->selector == info->selector) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u is already defined.\n",
+ UVC_GUID_ARGS(info->entity), info->selector);
+ ret = -EEXIST;
+ goto end;
+ }
+ if (ctrl->index == info->index) {
+ uvc_trace(UVC_TRACE_CONTROL, "Control "
+ UVC_GUID_FORMAT "/%u would overwrite index "
+ "%d.\n", UVC_GUID_ARGS(info->entity),
+ info->selector, info->index);
+ ret = -EEXIST;
+ goto end;
+ }
+ }
+
+ list_for_each_entry(dev, &uvc_driver.devices, list)
+ uvc_ctrl_add_ctrl(dev, info);
+
+ INIT_LIST_HEAD(&info->mappings);
+ list_add_tail(&info->list, &uvc_driver.controls);
+end:
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+ return ret;
+}
+
+int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping)
+{
+ struct uvc_control_info *info;
+ struct uvc_control_mapping *map;
+ int ret = -EINVAL;
+
+ if (mapping->id & ~V4L2_CTRL_ID_MASK) {
+ uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with "
+ "invalid control id 0x%08x\n", mapping->name,
+ mapping->id);
+ return -EINVAL;
+ }
+
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ list_for_each_entry(info, &uvc_driver.controls, list) {
+ if (memcmp(info->entity, mapping->entity, 16) ||
+ info->selector != mapping->selector)
+ continue;
+
+ if (info->size * 8 < mapping->size + mapping->offset) {
+ uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would "
+ "overflow control " UVC_GUID_FORMAT "/%u\n",
+ mapping->name, UVC_GUID_ARGS(info->entity),
+ info->selector);
+ ret = -EOVERFLOW;
+ goto end;
+ }
+
+ /* Check if the list contains a mapping matching the new one.
+ * Bail out if it does.
+ */
+ list_for_each_entry(map, &info->mappings, list) {
+ if (map->id == mapping->id) {
+ uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is "
+ "already defined.\n", mapping->name);
+ ret = -EEXIST;
+ goto end;
+ }
+ }
+
+ mapping->ctrl = info;
+ list_add_tail(&mapping->list, &info->mappings);
+ uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control "
+ UVC_GUID_FORMAT "/%u.\n", mapping->name,
+ UVC_GUID_ARGS(info->entity), info->selector);
+
+ ret = 0;
+ break;
+ }
+end:
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+ return ret;
+}
+
+/*
+ * Initialize device controls.
+ */
+int uvc_ctrl_init_device(struct uvc_device *dev)
+{
+ struct uvc_control_info *info;
+ struct uvc_control *ctrl;
+ struct uvc_entity *entity;
+ unsigned int i;
+
+ /* Walk the entities list and instantiate controls */
+ list_for_each_entry(entity, &dev->entities, list) {
+ unsigned int bControlSize = 0, ncontrols = 0;
+ __u8 *bmControls = NULL;
+
+ if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) {
+ bmControls = entity->extension.bmControls;
+ bControlSize = entity->extension.bControlSize;
+ } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) {
+ bmControls = entity->processing.bmControls;
+ bControlSize = entity->processing.bControlSize;
+ } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) {
+ bmControls = entity->camera.bmControls;
+ bControlSize = entity->camera.bControlSize;
+ }
+
+ for (i = 0; i < bControlSize; ++i)
+ ncontrols += hweight8(bmControls[i]);
+
+ if (ncontrols == 0)
+ continue;
+
+ entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL);
+ if (entity->controls == NULL)
+ return -ENOMEM;
+
+ entity->ncontrols = ncontrols;
+
+ ctrl = entity->controls;
+ for (i = 0; i < bControlSize * 8; ++i) {
+ if (uvc_get_bit(bmControls, i) == 0)
+ continue;
+
+ ctrl->entity = entity;
+ ctrl->index = i;
+ ctrl++;
+ }
+ }
+
+ /* Walk the controls info list and associate them with the device
+ * controls, then add the device to the global device list. This has
+ * to be done while holding the controls lock, to make sure
+ * uvc_ctrl_add_info() will not get called in-between.
+ */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ list_for_each_entry(info, &uvc_driver.controls, list)
+ uvc_ctrl_add_ctrl(dev, info);
+
+ list_add_tail(&dev->list, &uvc_driver.devices);
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+
+ return 0;
+}
+
+/*
+ * Cleanup device controls.
+ */
+void uvc_ctrl_cleanup_device(struct uvc_device *dev)
+{
+ struct uvc_entity *entity;
+ unsigned int i;
+
+ /* Remove the device from the global devices list */
+ mutex_lock(&uvc_driver.ctrl_mutex);
+ if (dev->list.next != NULL)
+ list_del(&dev->list);
+ mutex_unlock(&uvc_driver.ctrl_mutex);
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ for (i = 0; i < entity->ncontrols; ++i)
+ kfree(entity->controls[i].data);
+
+ kfree(entity->controls);
+ }
+}
+
+void uvc_ctrl_init(void)
+{
+ struct uvc_control_info *ctrl = uvc_ctrls;
+ struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls);
+ struct uvc_control_mapping *mapping = uvc_ctrl_mappings;
+ struct uvc_control_mapping *mend =
+ mapping + ARRAY_SIZE(uvc_ctrl_mappings);
+
+ for (; ctrl < cend; ++ctrl)
+ uvc_ctrl_add_info(ctrl);
+
+ for (; mapping < mend; ++mapping)
+ uvc_ctrl_add_mapping(mapping);
+}
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
new file mode 100644
index 00000000000..60ced589f89
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -0,0 +1,1955 @@
+/*
+ * uvc_driver.c -- USB Video Class driver
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+/*
+ * This driver aims to support video input devices compliant with the 'USB
+ * Video Class' specification.
+ *
+ * The driver doesn't support the deprecated v4l1 interface. It implements the
+ * mmap capture method only, and doesn't do any image format conversion in
+ * software. If your user-space application doesn't support YUYV or MJPEG, fix
+ * it :-). Please note that the MJPEG data have been stripped from their
+ * Huffman tables (DHT marker), you will need to add it back if your JPEG
+ * codec can't handle MJPEG data.
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+#define DRIVER_AUTHOR "Laurent Pinchart <laurent.pinchart@skynet.be>"
+#define DRIVER_DESC "USB Video Class driver"
+#ifndef DRIVER_VERSION
+#define DRIVER_VERSION "v0.1.0"
+#endif
+
+static unsigned int uvc_quirks_param;
+unsigned int uvc_trace_param;
+
+/* ------------------------------------------------------------------------
+ * Control, formats, ...
+ */
+
+static struct uvc_format_desc uvc_fmts[] = {
+ {
+ .name = "YUV 4:2:2 (YUYV)",
+ .guid = UVC_GUID_FORMAT_YUY2,
+ .fcc = V4L2_PIX_FMT_YUYV,
+ },
+ {
+ .name = "YUV 4:2:0 (NV12)",
+ .guid = UVC_GUID_FORMAT_NV12,
+ .fcc = V4L2_PIX_FMT_NV12,
+ },
+ {
+ .name = "MJPEG",
+ .guid = UVC_GUID_FORMAT_MJPEG,
+ .fcc = V4L2_PIX_FMT_MJPEG,
+ },
+ {
+ .name = "YVU 4:2:0 (YV12)",
+ .guid = UVC_GUID_FORMAT_YV12,
+ .fcc = V4L2_PIX_FMT_YVU420,
+ },
+ {
+ .name = "YUV 4:2:0 (I420)",
+ .guid = UVC_GUID_FORMAT_I420,
+ .fcc = V4L2_PIX_FMT_YUV420,
+ },
+ {
+ .name = "YUV 4:2:2 (UYVY)",
+ .guid = UVC_GUID_FORMAT_UYVY,
+ .fcc = V4L2_PIX_FMT_UYVY,
+ },
+ {
+ .name = "Greyscale",
+ .guid = UVC_GUID_FORMAT_Y800,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "RGB Bayer",
+ .guid = UVC_GUID_FORMAT_BY8,
+ .fcc = V4L2_PIX_FMT_SBGGR8,
+ },
+};
+
+/* ------------------------------------------------------------------------
+ * Utility functions
+ */
+
+struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
+ __u8 epaddr)
+{
+ struct usb_host_endpoint *ep;
+ unsigned int i;
+
+ for (i = 0; i < alts->desc.bNumEndpoints; ++i) {
+ ep = &alts->endpoint[i];
+ if (ep->desc.bEndpointAddress == epaddr)
+ return ep;
+ }
+
+ return NULL;
+}
+
+static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16])
+{
+ unsigned int len = ARRAY_SIZE(uvc_fmts);
+ unsigned int i;
+
+ for (i = 0; i < len; ++i) {
+ if (memcmp(guid, uvc_fmts[i].guid, 16) == 0)
+ return &uvc_fmts[i];
+ }
+
+ return NULL;
+}
+
+static __u32 uvc_colorspace(const __u8 primaries)
+{
+ static const __u8 colorprimaries[] = {
+ 0,
+ V4L2_COLORSPACE_SRGB,
+ V4L2_COLORSPACE_470_SYSTEM_M,
+ V4L2_COLORSPACE_470_SYSTEM_BG,
+ V4L2_COLORSPACE_SMPTE170M,
+ V4L2_COLORSPACE_SMPTE240M,
+ };
+
+ if (primaries < ARRAY_SIZE(colorprimaries))
+ return colorprimaries[primaries];
+
+ return 0;
+}
+
+/* Simplify a fraction using a simple continued fraction decomposition. The
+ * idea here is to convert fractions such as 333333/10000000 to 1/30 using
+ * 32 bit arithmetic only. The algorithm is not perfect and relies upon two
+ * arbitrary parameters to remove non-significative terms from the simple
+ * continued fraction decomposition. Using 8 and 333 for n_terms and threshold
+ * respectively seems to give nice results.
+ */
+void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator,
+ unsigned int n_terms, unsigned int threshold)
+{
+ uint32_t *an;
+ uint32_t x, y, r;
+ unsigned int i, n;
+
+ an = kmalloc(n_terms * sizeof *an, GFP_KERNEL);
+ if (an == NULL)
+ return;
+
+ /* Convert the fraction to a simple continued fraction. See
+ * http://mathforum.org/dr.math/faq/faq.fractions.html
+ * Stop if the current term is bigger than or equal to the given
+ * threshold.
+ */
+ x = *numerator;
+ y = *denominator;
+
+ for (n = 0; n < n_terms && y != 0; ++n) {
+ an[n] = x / y;
+ if (an[n] >= threshold) {
+ if (n < 2)
+ n++;
+ break;
+ }
+
+ r = x - an[n] * y;
+ x = y;
+ y = r;
+ }
+
+ /* Expand the simple continued fraction back to an integer fraction. */
+ x = 0;
+ y = 1;
+
+ for (i = n; i > 0; --i) {
+ r = y;
+ y = an[i-1] * y + x;
+ x = r;
+ }
+
+ *numerator = y;
+ *denominator = x;
+ kfree(an);
+}
+
+/* Convert a fraction to a frame interval in 100ns multiples. The idea here is
+ * to compute numerator / denominator * 10000000 using 32 bit fixed point
+ * arithmetic only.
+ */
+uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator)
+{
+ uint32_t multiplier;
+
+ /* Saturate the result if the operation would overflow. */
+ if (denominator == 0 ||
+ numerator/denominator >= ((uint32_t)-1)/10000000)
+ return (uint32_t)-1;
+
+ /* Divide both the denominator and the multiplier by two until
+ * numerator * multiplier doesn't overflow. If anyone knows a better
+ * algorithm please let me know.
+ */
+ multiplier = 10000000;
+ while (numerator > ((uint32_t)-1)/multiplier) {
+ multiplier /= 2;
+ denominator /= 2;
+ }
+
+ return denominator ? numerator * multiplier / denominator : 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Terminal and unit management
+ */
+
+static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id)
+{
+ struct uvc_entity *entity;
+
+ list_for_each_entry(entity, &dev->entities, list) {
+ if (entity->id == id)
+ return entity;
+ }
+
+ return NULL;
+}
+
+static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev,
+ int id, struct uvc_entity *entity)
+{
+ unsigned int i;
+
+ if (entity == NULL)
+ entity = list_entry(&dev->entities, struct uvc_entity, list);
+
+ list_for_each_entry_continue(entity, &dev->entities, list) {
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case TT_STREAMING:
+ if (entity->output.bSourceID == id)
+ return entity;
+ break;
+
+ case VC_PROCESSING_UNIT:
+ if (entity->processing.bSourceID == id)
+ return entity;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ for (i = 0; i < entity->selector.bNrInPins; ++i)
+ if (entity->selector.baSourceID[i] == id)
+ return entity;
+ break;
+
+ case VC_EXTENSION_UNIT:
+ for (i = 0; i < entity->extension.bNrInPins; ++i)
+ if (entity->extension.baSourceID[i] == id)
+ return entity;
+ break;
+ }
+ }
+
+ return NULL;
+}
+
+/* ------------------------------------------------------------------------
+ * Descriptors handling
+ */
+
+static int uvc_parse_format(struct uvc_device *dev,
+ struct uvc_streaming *streaming, struct uvc_format *format,
+ __u32 **intervals, unsigned char *buffer, int buflen)
+{
+ struct usb_interface *intf = streaming->intf;
+ struct usb_host_interface *alts = intf->cur_altsetting;
+ struct uvc_format_desc *fmtdesc;
+ struct uvc_frame *frame;
+ const unsigned char *start = buffer;
+ unsigned int interval;
+ unsigned int i, n;
+ __u8 ftype;
+
+ format->type = buffer[2];
+ format->index = buffer[3];
+
+ switch (buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_FRAME_BASED:
+ if (buflen < 27) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Find the format descriptor from its GUID. */
+ fmtdesc = uvc_format_by_guid(&buffer[5]);
+
+ if (fmtdesc != NULL) {
+ strncpy(format->name, fmtdesc->name,
+ sizeof format->name);
+ format->fcc = fmtdesc->fcc;
+ } else {
+ uvc_printk(KERN_INFO, "Unknown video format "
+ UVC_GUID_FORMAT "\n",
+ UVC_GUID_ARGS(&buffer[5]));
+ snprintf(format->name, sizeof format->name,
+ UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5]));
+ format->fcc = 0;
+ }
+
+ format->bpp = buffer[21];
+ if (buffer[2] == VS_FORMAT_UNCOMPRESSED) {
+ ftype = VS_FRAME_UNCOMPRESSED;
+ } else {
+ ftype = VS_FRAME_FRAME_BASED;
+ if (buffer[27])
+ format->flags = UVC_FMT_FLAG_COMPRESSED;
+ }
+ break;
+
+ case VS_FORMAT_MJPEG:
+ if (buflen < 11) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ strncpy(format->name, "MJPEG", sizeof format->name);
+ format->fcc = V4L2_PIX_FMT_MJPEG;
+ format->flags = UVC_FMT_FLAG_COMPRESSED;
+ format->bpp = 0;
+ ftype = VS_FRAME_MJPEG;
+ break;
+
+ case VS_FORMAT_DV:
+ if (buflen < 9) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ switch (buffer[8] & 0x7f) {
+ case 0:
+ strncpy(format->name, "SD-DV", sizeof format->name);
+ break;
+ case 1:
+ strncpy(format->name, "SDL-DV", sizeof format->name);
+ break;
+ case 2:
+ strncpy(format->name, "HD-DV", sizeof format->name);
+ break;
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d: unknown DV format %u\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber, buffer[8]);
+ return -EINVAL;
+ }
+
+ strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz",
+ sizeof format->name);
+
+ format->fcc = V4L2_PIX_FMT_DV;
+ format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM;
+ format->bpp = 0;
+ ftype = 0;
+
+ /* Create a dummy frame descriptor. */
+ frame = &format->frame[0];
+ memset(&format->frame[0], 0, sizeof format->frame[0]);
+ frame->bFrameIntervalType = 1;
+ frame->dwDefaultFrameInterval = 1;
+ frame->dwFrameInterval = *intervals;
+ *(*intervals)++ = 1;
+ format->nframes = 1;
+ break;
+
+ case VS_FORMAT_MPEG2TS:
+ case VS_FORMAT_STREAM_BASED:
+ /* Not supported yet. */
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d unsupported format %u\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber,
+ buffer[2]);
+ return -EINVAL;
+ }
+
+ uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name);
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+
+ /* Parse the frame descriptors. Only uncompressed, MJPEG and frame
+ * based formats have frame descriptors.
+ */
+ while (buflen > 2 && buffer[2] == ftype) {
+ frame = &format->frame[format->nframes];
+
+ if (ftype != VS_FRAME_FRAME_BASED)
+ n = buflen > 25 ? buffer[25] : 0;
+ else
+ n = buflen > 21 ? buffer[21] : 0;
+
+ n = n ? n : 3;
+
+ if (buflen < 26 + 4*n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d FRAME error\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ frame->bFrameIndex = buffer[3];
+ frame->bmCapabilities = buffer[4];
+ frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]);
+ frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]);
+ frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]);
+ frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]);
+ if (ftype != VS_FRAME_FRAME_BASED) {
+ frame->dwMaxVideoFrameBufferSize =
+ le32_to_cpup((__le32 *)&buffer[17]);
+ frame->dwDefaultFrameInterval =
+ le32_to_cpup((__le32 *)&buffer[21]);
+ frame->bFrameIntervalType = buffer[25];
+ } else {
+ frame->dwMaxVideoFrameBufferSize = 0;
+ frame->dwDefaultFrameInterval =
+ le32_to_cpup((__le32 *)&buffer[17]);
+ frame->bFrameIntervalType = buffer[21];
+ }
+ frame->dwFrameInterval = *intervals;
+
+ /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize
+ * completely. Observed behaviours range from setting the
+ * value to 1.1x the actual frame size of hardwiring the
+ * 16 low bits to 0. This results in a higher than necessary
+ * memory usage as well as a wrong image size information. For
+ * uncompressed formats this can be fixed by computing the
+ * value from the frame size.
+ */
+ if (!(format->flags & UVC_FMT_FLAG_COMPRESSED))
+ frame->dwMaxVideoFrameBufferSize = format->bpp
+ * frame->wWidth * frame->wHeight / 8;
+
+ /* Some bogus devices report dwMinFrameInterval equal to
+ * dwMaxFrameInterval and have dwFrameIntervalStep set to
+ * zero. Setting all null intervals to 1 fixes the problem and
+ * some other divisions by zero which could happen.
+ */
+ for (i = 0; i < n; ++i) {
+ interval = le32_to_cpup((__le32 *)&buffer[26+4*i]);
+ *(*intervals)++ = interval ? interval : 1;
+ }
+
+ /* Make sure that the default frame interval stays between
+ * the boundaries.
+ */
+ n -= frame->bFrameIntervalType ? 1 : 2;
+ frame->dwDefaultFrameInterval =
+ min(frame->dwFrameInterval[n],
+ max(frame->dwFrameInterval[0],
+ frame->dwDefaultFrameInterval));
+
+ uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
+ frame->wWidth, frame->wHeight,
+ 10000000/frame->dwDefaultFrameInterval,
+ (100000000/frame->dwDefaultFrameInterval)%10);
+
+ format->nframes++;
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) {
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen > 2 && buffer[2] == VS_COLORFORMAT) {
+ if (buflen < 6) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+ "interface %d COLORFORMAT error\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ format->colorspace = uvc_colorspace(buffer[3]);
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ return buffer - start;
+}
+
+static int uvc_parse_streaming(struct uvc_device *dev,
+ struct usb_interface *intf)
+{
+ struct uvc_streaming *streaming = NULL;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ struct usb_host_interface *alts = &intf->altsetting[0];
+ unsigned char *_buffer, *buffer = alts->extra;
+ int _buflen, buflen = alts->extralen;
+ unsigned int nformats = 0, nframes = 0, nintervals = 0;
+ unsigned int size, i, n, p;
+ __u32 *interval;
+ __u16 psize;
+ int ret = -EINVAL;
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass
+ != SC_VIDEOSTREAMING) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a "
+ "video streaming interface\n", dev->udev->devnum,
+ intf->altsetting[0].desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already "
+ "claimed\n", dev->udev->devnum,
+ intf->altsetting[0].desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ streaming = kzalloc(sizeof *streaming, GFP_KERNEL);
+ if (streaming == NULL) {
+ usb_driver_release_interface(&uvc_driver.driver, intf);
+ return -EINVAL;
+ }
+
+ mutex_init(&streaming->mutex);
+ streaming->intf = usb_get_intf(intf);
+ streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ /* The Pico iMage webcam has its class-specific interface descriptors
+ * after the endpoint descriptors.
+ */
+ if (buflen == 0) {
+ for (i = 0; i < alts->desc.bNumEndpoints; ++i) {
+ struct usb_host_endpoint *ep = &alts->endpoint[i];
+
+ if (ep->extralen == 0)
+ continue;
+
+ if (ep->extralen > 2 &&
+ ep->extra[1] == USB_DT_CS_INTERFACE) {
+ uvc_trace(UVC_TRACE_DESCR, "trying extra data "
+ "from endpoint %u.\n", i);
+ buffer = alts->endpoint[i].extra;
+ buflen = alts->endpoint[i].extralen;
+ break;
+ }
+ }
+ }
+
+ /* Skip the standard interface descriptors. */
+ while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) {
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ if (buflen <= 2) {
+ uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming "
+ "interface descriptors found.\n");
+ goto error;
+ }
+
+ /* Parse the header descriptor. */
+ if (buffer[2] == VS_OUTPUT_HEADER) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d OUTPUT HEADER descriptor is not supported.\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber);
+ goto error;
+ } else if (buffer[2] == VS_INPUT_HEADER) {
+ p = buflen >= 5 ? buffer[3] : 0;
+ n = buflen >= 12 ? buffer[12] : 0;
+
+ if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
+ "interface %d INPUT HEADER descriptor is "
+ "invalid.\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ streaming->header.bNumFormats = p;
+ streaming->header.bEndpointAddress = buffer[6];
+ streaming->header.bmInfo = buffer[7];
+ streaming->header.bTerminalLink = buffer[8];
+ streaming->header.bStillCaptureMethod = buffer[9];
+ streaming->header.bTriggerSupport = buffer[10];
+ streaming->header.bTriggerUsage = buffer[11];
+ streaming->header.bControlSize = n;
+
+ streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL);
+ if (streaming->header.bmaControls == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ memcpy(streaming->header.bmaControls, &buffer[13], p*n);
+ } else {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d HEADER descriptor not found.\n", dev->udev->devnum,
+ alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+
+ _buffer = buffer;
+ _buflen = buflen;
+
+ /* Count the format and frame descriptors. */
+ while (_buflen > 2) {
+ switch (_buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_MJPEG:
+ case VS_FORMAT_FRAME_BASED:
+ nformats++;
+ break;
+
+ case VS_FORMAT_DV:
+ /* DV format has no frame descriptor. We will create a
+ * dummy frame descriptor with a dummy frame interval.
+ */
+ nformats++;
+ nframes++;
+ nintervals++;
+ break;
+
+ case VS_FORMAT_MPEG2TS:
+ case VS_FORMAT_STREAM_BASED:
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
+ "interface %d FORMAT %u is not supported.\n",
+ dev->udev->devnum,
+ alts->desc.bInterfaceNumber, _buffer[2]);
+ break;
+
+ case VS_FRAME_UNCOMPRESSED:
+ case VS_FRAME_MJPEG:
+ nframes++;
+ if (_buflen > 25)
+ nintervals += _buffer[25] ? _buffer[25] : 3;
+ break;
+
+ case VS_FRAME_FRAME_BASED:
+ nframes++;
+ if (_buflen > 21)
+ nintervals += _buffer[21] ? _buffer[21] : 3;
+ break;
+ }
+
+ _buflen -= _buffer[0];
+ _buffer += _buffer[0];
+ }
+
+ if (nformats == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d has no supported formats defined.\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber);
+ goto error;
+ }
+
+ size = nformats * sizeof *format + nframes * sizeof *frame
+ + nintervals * sizeof *interval;
+ format = kzalloc(size, GFP_KERNEL);
+ if (format == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ frame = (struct uvc_frame *)&format[nformats];
+ interval = (__u32 *)&frame[nframes];
+
+ streaming->format = format;
+ streaming->nformats = nformats;
+
+ /* Parse the format descriptors. */
+ while (buflen > 2) {
+ switch (buffer[2]) {
+ case VS_FORMAT_UNCOMPRESSED:
+ case VS_FORMAT_MJPEG:
+ case VS_FORMAT_DV:
+ case VS_FORMAT_FRAME_BASED:
+ format->frame = frame;
+ ret = uvc_parse_format(dev, streaming, format,
+ &interval, buffer, buflen);
+ if (ret < 0)
+ goto error;
+
+ frame += format->nframes;
+ format++;
+
+ buflen -= ret;
+ buffer += ret;
+ continue;
+
+ default:
+ break;
+ }
+
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ /* Parse the alternate settings to find the maximum bandwidth. */
+ for (i = 0; i < intf->num_altsetting; ++i) {
+ struct usb_host_endpoint *ep;
+ alts = &intf->altsetting[i];
+ ep = uvc_find_endpoint(alts,
+ streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ continue;
+
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+ if (psize > streaming->maxpsize)
+ streaming->maxpsize = psize;
+ }
+
+ list_add_tail(&streaming->list, &dev->streaming);
+ return 0;
+
+error:
+ usb_driver_release_interface(&uvc_driver.driver, intf);
+ usb_put_intf(intf);
+ kfree(streaming->format);
+ kfree(streaming->header.bmaControls);
+ kfree(streaming);
+ return ret;
+}
+
+/* Parse vendor-specific extensions. */
+static int uvc_parse_vendor_control(struct uvc_device *dev,
+ const unsigned char *buffer, int buflen)
+{
+ struct usb_device *udev = dev->udev;
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ struct uvc_entity *unit;
+ unsigned int n, p;
+ int handled = 0;
+
+ switch (le16_to_cpu(dev->udev->descriptor.idVendor)) {
+ case 0x046d: /* Logitech */
+ if (buffer[1] != 0x41 || buffer[2] != 0x01)
+ break;
+
+ /* Logitech implements several vendor specific functions
+ * through vendor specific extension units (LXU).
+ *
+ * The LXU descriptors are similar to XU descriptors
+ * (see "USB Device Video Class for Video Devices", section
+ * 3.7.2.6 "Extension Unit Descriptor") with the following
+ * differences:
+ *
+ * ----------------------------------------------------------
+ * 0 bLength 1 Number
+ * Size of this descriptor, in bytes: 24+p+n*2
+ * ----------------------------------------------------------
+ * 23+p+n bmControlsType N Bitmap
+ * Individual bits in the set are defined:
+ * 0: Absolute
+ * 1: Relative
+ *
+ * This bitset is mapped exactly the same as bmControls.
+ * ----------------------------------------------------------
+ * 23+p+n*2 bReserved 1 Boolean
+ * ----------------------------------------------------------
+ * 24+p+n*2 iExtension 1 Index
+ * Index of a string descriptor that describes this
+ * extension unit.
+ * ----------------------------------------------------------
+ */
+ p = buflen >= 22 ? buffer[21] : 0;
+ n = buflen >= 25 + p ? buffer[22+p] : 0;
+
+ if (buflen < 25 + p + 2*n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d EXTENSION_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ break;
+ }
+
+ unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = VC_EXTENSION_UNIT;
+ memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
+ unit->extension.bNumControls = buffer[20];
+ unit->extension.bNrInPins =
+ le16_to_cpup((__le16 *)&buffer[21]);
+ unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->extension.baSourceID, &buffer[22], p);
+ unit->extension.bControlSize = buffer[22+p];
+ unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
+ unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit
+ + p + n;
+ memcpy(unit->extension.bmControls, &buffer[23+p], 2*n);
+
+ if (buffer[24+p+2*n] != 0)
+ usb_string(udev, buffer[24+p+2*n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Extension %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ handled = 1;
+ break;
+ }
+
+ return handled;
+}
+
+static int uvc_parse_standard_control(struct uvc_device *dev,
+ const unsigned char *buffer, int buflen)
+{
+ struct usb_device *udev = dev->udev;
+ struct uvc_entity *unit, *term;
+ struct usb_interface *intf;
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ unsigned int i, n, p, len;
+ __u16 type;
+
+ switch (buffer[2]) {
+ case VC_HEADER:
+ n = buflen >= 12 ? buffer[11] : 0;
+
+ if (buflen < 12 || buflen < 12 + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d HEADER error\n", udev->devnum,
+ alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]);
+ dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]);
+
+ /* Parse all USB Video Streaming interfaces. */
+ for (i = 0; i < n; ++i) {
+ intf = usb_ifnum_to_if(udev, buffer[12+i]);
+ if (intf == NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d "
+ "interface %d doesn't exists\n",
+ udev->devnum, i);
+ continue;
+ }
+
+ uvc_parse_streaming(dev, intf);
+ }
+ break;
+
+ case VC_INPUT_TERMINAL:
+ if (buflen < 8) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Make sure the terminal type MSB is not null, otherwise it
+ * could be confused with a unit.
+ */
+ type = le16_to_cpup((__le16 *)&buffer[4]);
+ if ((type & 0xff00) == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL %d has invalid "
+ "type 0x%04x, skipping\n", udev->devnum,
+ alts->desc.bInterfaceNumber,
+ buffer[3], type);
+ return 0;
+ }
+
+ n = 0;
+ p = 0;
+ len = 8;
+
+ if (type == ITT_CAMERA) {
+ n = buflen >= 15 ? buffer[14] : 0;
+ len = 15;
+
+ } else if (type == ITT_MEDIA_TRANSPORT_INPUT) {
+ n = buflen >= 9 ? buffer[8] : 0;
+ p = buflen >= 10 + n ? buffer[9+n] : 0;
+ len = 10;
+ }
+
+ if (buflen < len + n + p) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d INPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ term = kzalloc(sizeof *term + n + p, GFP_KERNEL);
+ if (term == NULL)
+ return -ENOMEM;
+
+ term->id = buffer[3];
+ term->type = type | UVC_TERM_INPUT;
+
+ if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) {
+ term->camera.bControlSize = n;
+ term->camera.bmControls = (__u8 *)term + sizeof *term;
+ term->camera.wObjectiveFocalLengthMin =
+ le16_to_cpup((__le16 *)&buffer[8]);
+ term->camera.wObjectiveFocalLengthMax =
+ le16_to_cpup((__le16 *)&buffer[10]);
+ term->camera.wOcularFocalLength =
+ le16_to_cpup((__le16 *)&buffer[12]);
+ memcpy(term->camera.bmControls, &buffer[15], n);
+ } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) {
+ term->media.bControlSize = n;
+ term->media.bmControls = (__u8 *)term + sizeof *term;
+ term->media.bTransportModeSize = p;
+ term->media.bmTransportModes = (__u8 *)term
+ + sizeof *term + n;
+ memcpy(term->media.bmControls, &buffer[9], n);
+ memcpy(term->media.bmTransportModes, &buffer[10+n], p);
+ }
+
+ if (buffer[7] != 0)
+ usb_string(udev, buffer[7], term->name,
+ sizeof term->name);
+ else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA)
+ sprintf(term->name, "Camera %u", buffer[3]);
+ else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT)
+ sprintf(term->name, "Media %u", buffer[3]);
+ else
+ sprintf(term->name, "Input %u", buffer[3]);
+
+ list_add_tail(&term->list, &dev->entities);
+ break;
+
+ case VC_OUTPUT_TERMINAL:
+ if (buflen < 9) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d OUTPUT_TERMINAL error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ /* Make sure the terminal type MSB is not null, otherwise it
+ * could be confused with a unit.
+ */
+ type = le16_to_cpup((__le16 *)&buffer[4]);
+ if ((type & 0xff00) == 0) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d OUTPUT_TERMINAL %d has invalid "
+ "type 0x%04x, skipping\n", udev->devnum,
+ alts->desc.bInterfaceNumber, buffer[3], type);
+ return 0;
+ }
+
+ term = kzalloc(sizeof *term, GFP_KERNEL);
+ if (term == NULL)
+ return -ENOMEM;
+
+ term->id = buffer[3];
+ term->type = type | UVC_TERM_OUTPUT;
+ term->output.bSourceID = buffer[7];
+
+ if (buffer[8] != 0)
+ usb_string(udev, buffer[8], term->name,
+ sizeof term->name);
+ else
+ sprintf(term->name, "Output %u", buffer[3]);
+
+ list_add_tail(&term->list, &dev->entities);
+ break;
+
+ case VC_SELECTOR_UNIT:
+ p = buflen >= 5 ? buffer[4] : 0;
+
+ if (buflen < 5 || buflen < 6 + p) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d SELECTOR_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + p, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ unit->selector.bNrInPins = buffer[4];
+ unit->selector.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->selector.baSourceID, &buffer[5], p);
+
+ if (buffer[5+p] != 0)
+ usb_string(udev, buffer[5+p], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Selector %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ case VC_PROCESSING_UNIT:
+ n = buflen >= 8 ? buffer[7] : 0;
+ p = dev->uvc_version >= 0x0110 ? 10 : 9;
+
+ if (buflen < p + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d PROCESSING_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ unit->processing.bSourceID = buffer[4];
+ unit->processing.wMaxMultiplier =
+ le16_to_cpup((__le16 *)&buffer[5]);
+ unit->processing.bControlSize = buffer[7];
+ unit->processing.bmControls = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->processing.bmControls, &buffer[8], n);
+ if (dev->uvc_version >= 0x0110)
+ unit->processing.bmVideoStandards = buffer[9+n];
+
+ if (buffer[8+n] != 0)
+ usb_string(udev, buffer[8+n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Processing %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ case VC_EXTENSION_UNIT:
+ p = buflen >= 22 ? buffer[21] : 0;
+ n = buflen >= 24 + p ? buffer[22+p] : 0;
+
+ if (buflen < 24 + p + n) {
+ uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
+ "interface %d EXTENSION_UNIT error\n",
+ udev->devnum, alts->desc.bInterfaceNumber);
+ return -EINVAL;
+ }
+
+ unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL);
+ if (unit == NULL)
+ return -ENOMEM;
+
+ unit->id = buffer[3];
+ unit->type = buffer[2];
+ memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
+ unit->extension.bNumControls = buffer[20];
+ unit->extension.bNrInPins =
+ le16_to_cpup((__le16 *)&buffer[21]);
+ unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
+ memcpy(unit->extension.baSourceID, &buffer[22], p);
+ unit->extension.bControlSize = buffer[22+p];
+ unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
+ memcpy(unit->extension.bmControls, &buffer[23+p], n);
+
+ if (buffer[23+p+n] != 0)
+ usb_string(udev, buffer[23+p+n], unit->name,
+ sizeof unit->name);
+ else
+ sprintf(unit->name, "Extension %u", buffer[3]);
+
+ list_add_tail(&unit->list, &dev->entities);
+ break;
+
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE "
+ "descriptor (%u)\n", buffer[2]);
+ break;
+ }
+
+ return 0;
+}
+
+static int uvc_parse_control(struct uvc_device *dev)
+{
+ struct usb_host_interface *alts = dev->intf->cur_altsetting;
+ unsigned char *buffer = alts->extra;
+ int buflen = alts->extralen;
+ int ret;
+
+ /* Parse the default alternate setting only, as the UVC specification
+ * defines a single alternate setting, the default alternate setting
+ * zero.
+ */
+
+ while (buflen > 2) {
+ if (uvc_parse_vendor_control(dev, buffer, buflen) ||
+ buffer[1] != USB_DT_CS_INTERFACE)
+ goto next_descriptor;
+
+ if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0)
+ return ret;
+
+next_descriptor:
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ /* Check if the optional status endpoint is present. */
+ if (alts->desc.bNumEndpoints == 1) {
+ struct usb_host_endpoint *ep = &alts->endpoint[0];
+ struct usb_endpoint_descriptor *desc = &ep->desc;
+
+ if (usb_endpoint_is_int_in(desc) &&
+ le16_to_cpu(desc->wMaxPacketSize) >= 8 &&
+ desc->bInterval != 0) {
+ uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint "
+ "(addr %02x).\n", desc->bEndpointAddress);
+ dev->int_ep = ep;
+ }
+ }
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * USB probe and disconnect
+ */
+
+/*
+ * Unregister the video devices.
+ */
+static void uvc_unregister_video(struct uvc_device *dev)
+{
+ if (dev->video.vdev) {
+ if (dev->video.vdev->minor == -1)
+ video_device_release(dev->video.vdev);
+ else
+ video_unregister_device(dev->video.vdev);
+ dev->video.vdev = NULL;
+ }
+}
+
+/*
+ * Scan the UVC descriptors to locate a chain starting at an Output Terminal
+ * and containing the following units:
+ *
+ * - a USB Streaming Output Terminal
+ * - zero or one Processing Unit
+ * - zero, one or mode single-input Selector Units
+ * - zero or one multiple-input Selector Units, provided all inputs are
+ * connected to input terminals
+ * - zero, one or mode single-input Extension Units
+ * - one Camera Input Terminal, or one or more External terminals.
+ *
+ * A side forward scan is made on each detected entity to check for additional
+ * extension units.
+ */
+static int uvc_scan_chain_entity(struct uvc_video_device *video,
+ struct uvc_entity *entity)
+{
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case VC_EXTENSION_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- XU %d", entity->id);
+
+ if (entity->extension.bNrInPins != 1) {
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more "
+ "than 1 input pin.\n", entity->id);
+ return -1;
+ }
+
+ list_add_tail(&entity->chain, &video->extensions);
+ break;
+
+ case VC_PROCESSING_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- PU %d", entity->id);
+
+ if (video->processing != NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple "
+ "Processing Units in chain.\n");
+ return -1;
+ }
+
+ video->processing = entity;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- SU %d", entity->id);
+
+ /* Single-input selector units are ignored. */
+ if (entity->selector.bNrInPins == 1)
+ break;
+
+ if (video->selector != NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector "
+ "Units in chain.\n");
+ return -1;
+ }
+
+ video->selector = entity;
+ break;
+
+ case ITT_VENDOR_SPECIFIC:
+ case ITT_CAMERA:
+ case ITT_MEDIA_TRANSPORT_INPUT:
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- IT %d\n", entity->id);
+
+ list_add_tail(&entity->chain, &video->iterms);
+ break;
+
+ default:
+ uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type "
+ "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int uvc_scan_chain_forward(struct uvc_video_device *video,
+ struct uvc_entity *entity, struct uvc_entity *prev)
+{
+ struct uvc_entity *forward;
+ int found;
+
+ /* Forward scan */
+ forward = NULL;
+ found = 0;
+
+ while (1) {
+ forward = uvc_entity_by_reference(video->dev, entity->id,
+ forward);
+ if (forward == NULL)
+ break;
+
+ if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT ||
+ forward == prev)
+ continue;
+
+ if (forward->extension.bNrInPins != 1) {
+ uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has"
+ "more than 1 input pin.\n", entity->id);
+ return -1;
+ }
+
+ list_add_tail(&forward->chain, &video->extensions);
+ if (uvc_trace_param & UVC_TRACE_PROBE) {
+ if (!found)
+ printk(" (-> XU");
+
+ printk(" %d", forward->id);
+ found = 1;
+ }
+ }
+ if (found)
+ printk(")");
+
+ return 0;
+}
+
+static int uvc_scan_chain_backward(struct uvc_video_device *video,
+ struct uvc_entity *entity)
+{
+ struct uvc_entity *term;
+ int id = -1, i;
+
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case VC_EXTENSION_UNIT:
+ id = entity->extension.baSourceID[0];
+ break;
+
+ case VC_PROCESSING_UNIT:
+ id = entity->processing.bSourceID;
+ break;
+
+ case VC_SELECTOR_UNIT:
+ /* Single-input selector units are ignored. */
+ if (entity->selector.bNrInPins == 1) {
+ id = entity->selector.baSourceID[0];
+ break;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- IT");
+
+ video->selector = entity;
+ for (i = 0; i < entity->selector.bNrInPins; ++i) {
+ id = entity->selector.baSourceID[i];
+ term = uvc_entity_by_id(video->dev, id);
+ if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) {
+ uvc_trace(UVC_TRACE_DESCR, "Selector unit %d "
+ "input %d isn't connected to an "
+ "input terminal\n", entity->id, i);
+ return -1;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" %d", term->id);
+
+ list_add_tail(&term->chain, &video->iterms);
+ uvc_scan_chain_forward(video, term, entity);
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk("\n");
+
+ id = 0;
+ break;
+ }
+
+ return id;
+}
+
+static int uvc_scan_chain(struct uvc_video_device *video)
+{
+ struct uvc_entity *entity, *prev;
+ int id;
+
+ entity = video->oterm;
+ uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id);
+ id = entity->output.bSourceID;
+ while (id != 0) {
+ prev = entity;
+ entity = uvc_entity_by_id(video->dev, id);
+ if (entity == NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found reference to "
+ "unknown entity %d.\n", id);
+ return -1;
+ }
+
+ /* Process entity */
+ if (uvc_scan_chain_entity(video, entity) < 0)
+ return -1;
+
+ /* Forward scan */
+ if (uvc_scan_chain_forward(video, entity, prev) < 0)
+ return -1;
+
+ /* Stop when a terminal is found. */
+ if (!UVC_ENTITY_IS_UNIT(entity))
+ break;
+
+ /* Backward scan */
+ id = uvc_scan_chain_backward(video, entity);
+ if (id < 0)
+ return id;
+ }
+
+ /* Initialize the video buffers queue. */
+ uvc_queue_init(&video->queue);
+
+ return 0;
+}
+
+/*
+ * Register the video devices.
+ *
+ * The driver currently supports a single video device per control interface
+ * only. The terminal and units must match the following structure:
+ *
+ * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING
+ *
+ * The Extension Units, if present, must have a single input pin. The
+ * Processing Unit and Extension Units can be in any order. Additional
+ * Extension Units connected to the main chain as single-unit branches are
+ * also supported.
+ */
+static int uvc_register_video(struct uvc_device *dev)
+{
+ struct video_device *vdev;
+ struct uvc_entity *term;
+ int found = 0, ret;
+
+ /* Check if the control interface matches the structure we expect. */
+ list_for_each_entry(term, &dev->entities, list) {
+ struct uvc_streaming *streaming;
+
+ if (UVC_ENTITY_TYPE(term) != TT_STREAMING)
+ continue;
+
+ memset(&dev->video, 0, sizeof dev->video);
+ mutex_init(&dev->video.ctrl_mutex);
+ INIT_LIST_HEAD(&dev->video.iterms);
+ INIT_LIST_HEAD(&dev->video.extensions);
+ dev->video.oterm = term;
+ dev->video.dev = dev;
+ if (uvc_scan_chain(&dev->video) < 0)
+ continue;
+
+ list_for_each_entry(streaming, &dev->streaming, list) {
+ if (streaming->header.bTerminalLink == term->id) {
+ dev->video.streaming = streaming;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found) {
+ uvc_printk(KERN_INFO, "No valid video chain found.\n");
+ return -1;
+ }
+
+ if (uvc_trace_param & UVC_TRACE_PROBE) {
+ uvc_printk(KERN_INFO, "Found a valid video chain (");
+ list_for_each_entry(term, &dev->video.iterms, chain) {
+ printk("%d", term->id);
+ if (term->chain.next != &dev->video.iterms)
+ printk(",");
+ }
+ printk(" -> %d).\n", dev->video.oterm->id);
+ }
+
+ /* Initialize the streaming interface with default streaming
+ * parameters.
+ */
+ if ((ret = uvc_video_init(&dev->video)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to initialize the device "
+ "(%d).\n", ret);
+ return ret;
+ }
+
+ /* Register the device with V4L. */
+ vdev = video_device_alloc();
+ if (vdev == NULL)
+ return -1;
+
+ /* We already hold a reference to dev->udev. The video device will be
+ * unregistered before the reference is released, so we don't need to
+ * get another one.
+ */
+ vdev->dev = &dev->intf->dev;
+ vdev->type = 0;
+ vdev->type2 = 0;
+ vdev->minor = -1;
+ vdev->fops = &uvc_fops;
+ vdev->release = video_device_release;
+ strncpy(vdev->name, dev->name, sizeof vdev->name);
+
+ /* Set the driver data before calling video_register_device, otherwise
+ * uvc_v4l2_open might race us.
+ *
+ * FIXME: usb_set_intfdata hasn't been called so far. Is that a
+ * problem ? Does any function which could be called here get
+ * a pointer to the usb_interface ?
+ */
+ dev->video.vdev = vdev;
+ video_set_drvdata(vdev, &dev->video);
+
+ if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) {
+ dev->video.vdev = NULL;
+ video_device_release(vdev);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Delete the UVC device.
+ *
+ * Called by the kernel when the last reference to the uvc_device structure
+ * is released.
+ *
+ * Unregistering the video devices is done here because every opened instance
+ * must be closed before the device can be unregistered. An alternative would
+ * have been to use another reference count for uvc_v4l2_open/uvc_release, and
+ * unregister the video devices on disconnect when that reference count drops
+ * to zero.
+ *
+ * As this function is called after or during disconnect(), all URBs have
+ * already been canceled by the USB core. There is no need to kill the
+ * interrupt URB manually.
+ */
+void uvc_delete(struct kref *kref)
+{
+ struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
+ struct list_head *p, *n;
+
+ /* Unregister the video device */
+ uvc_unregister_video(dev);
+ usb_put_intf(dev->intf);
+ usb_put_dev(dev->udev);
+
+ uvc_status_cleanup(dev);
+ uvc_ctrl_cleanup_device(dev);
+
+ list_for_each_safe(p, n, &dev->entities) {
+ struct uvc_entity *entity;
+ entity = list_entry(p, struct uvc_entity, list);
+ kfree(entity);
+ }
+
+ list_for_each_safe(p, n, &dev->streaming) {
+ struct uvc_streaming *streaming;
+ streaming = list_entry(p, struct uvc_streaming, list);
+ usb_driver_release_interface(&uvc_driver.driver,
+ streaming->intf);
+ usb_put_intf(streaming->intf);
+ kfree(streaming->format);
+ kfree(streaming->header.bmaControls);
+ kfree(streaming);
+ }
+
+ kfree(dev);
+}
+
+static int uvc_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct uvc_device *dev;
+ int ret;
+
+ if (id->idVendor && id->idProduct)
+ uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s "
+ "(%04x:%04x)\n", udev->devpath, id->idVendor,
+ id->idProduct);
+ else
+ uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
+ udev->devpath);
+
+ /* Allocate memory for the device and initialize it */
+ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&dev->entities);
+ INIT_LIST_HEAD(&dev->streaming);
+ kref_init(&dev->kref);
+
+ dev->udev = usb_get_dev(udev);
+ dev->intf = usb_get_intf(intf);
+ dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ dev->quirks = id->driver_info | uvc_quirks_param;
+
+ if (udev->product != NULL)
+ strncpy(dev->name, udev->product, sizeof dev->name);
+ else
+ snprintf(dev->name, sizeof dev->name,
+ "UVC Camera (%04x:%04x)",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ /* Parse the Video Class control descriptor */
+ if (uvc_parse_control(dev) < 0) {
+ uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
+ "descriptors.\n");
+ goto error;
+ }
+
+ uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n",
+ dev->uvc_version >> 8, dev->uvc_version & 0xff,
+ udev->product ? udev->product : "<unnamed>",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ if (uvc_quirks_param != 0) {
+ uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module "
+ "parameter for testing purpose.\n", uvc_quirks_param);
+ uvc_printk(KERN_INFO, "Please report required quirks to the "
+ "linux-uvc-devel mailing list.\n");
+ }
+
+ /* Initialize controls */
+ if (uvc_ctrl_init_device(dev) < 0)
+ goto error;
+
+ /* Register the video devices */
+ if (uvc_register_video(dev) < 0)
+ goto error;
+
+ /* Save our data pointer in the interface data */
+ usb_set_intfdata(intf, dev);
+
+ /* Initialize the interrupt URB */
+ if ((ret = uvc_status_init(dev)) < 0) {
+ uvc_printk(KERN_INFO, "Unable to initialize the status "
+ "endpoint (%d), status interrupt will not be "
+ "supported.\n", ret);
+ }
+
+ uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n");
+ return 0;
+
+error:
+ kref_put(&dev->kref, uvc_delete);
+ return -ENODEV;
+}
+
+static void uvc_disconnect(struct usb_interface *intf)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+
+ /* Set the USB interface data to NULL. This can be done outside the
+ * lock, as there's no other reader.
+ */
+ usb_set_intfdata(intf, NULL);
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING)
+ return;
+
+ /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide
+ * lock is needed to prevent uvc_disconnect from releasing its
+ * reference to the uvc_device instance after uvc_v4l2_open() received
+ * the pointer to the device (video_devdata) but before it got the
+ * chance to increase the reference count (kref_get).
+ */
+ mutex_lock(&uvc_driver.open_mutex);
+
+ dev->state |= UVC_DEV_DISCONNECTED;
+ kref_put(&dev->kref, uvc_delete);
+
+ mutex_unlock(&uvc_driver.open_mutex);
+}
+
+static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+
+ uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n",
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ /* Controls are cached on the fly so they don't need to be saved. */
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL)
+ return uvc_status_suspend(dev);
+
+ if (dev->video.streaming->intf != intf) {
+ uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB "
+ "interface mismatch.\n");
+ return -EINVAL;
+ }
+
+ return uvc_video_suspend(&dev->video);
+}
+
+static int uvc_resume(struct usb_interface *intf)
+{
+ struct uvc_device *dev = usb_get_intfdata(intf);
+ int ret;
+
+ uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
+ if ((ret = uvc_ctrl_resume_device(dev)) < 0)
+ return ret;
+
+ return uvc_status_resume(dev);
+ }
+
+ if (dev->video.streaming->intf != intf) {
+ uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB "
+ "interface mismatch.\n");
+ return -EINVAL;
+ }
+
+ return uvc_video_resume(&dev->video);
+}
+
+/* ------------------------------------------------------------------------
+ * Driver initialization and cleanup
+ */
+
+/*
+ * The Logitech cameras listed below have their interface class set to
+ * VENDOR_SPEC because they don't announce themselves as UVC devices, even
+ * though they are compliant.
+ */
+static struct usb_device_id uvc_ids[] = {
+ /* ALi M5606 (Clevo M540SR) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0402,
+ .idProduct = 0x5606,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Creative Live! Optia */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x041e,
+ .idProduct = 0x4057,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Microsoft Lifecam NX-6000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x045e,
+ .idProduct = 0x00f8,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Microsoft Lifecam VX-7000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x045e,
+ .idProduct = 0x0723,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Logitech Quickcam Fusion */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c1,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Orbit MP */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Pro for Notebook */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c3,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam Pro 5000 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c5,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam OEM Dell Notebook */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c6,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Logitech Quickcam OEM Cisco VT Camera II */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x046d,
+ .idProduct = 0x08c7,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
+ /* Apple Built-In iSight */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x05ac,
+ .idProduct = 0x8501,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_BUILTIN_ISIGHT },
+ /* Genesys Logic USB 2.0 PC Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x05e3,
+ .idProduct = 0x0505,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Silicon Motion SM371 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x090c,
+ .idProduct = 0xb371,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* MT6227 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0e8d,
+ .idProduct = 0x0004,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Syntek (HP Spartan) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x174f,
+ .idProduct = 0x5212,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Syntek (Asus U3S) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x174f,
+ .idProduct = 0x8a33,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Ecamm Pico iMage */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x18cd,
+ .idProduct = 0xcafe,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS },
+ /* Bodelin ProScopeHR */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_DEV_HI
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19ab,
+ .idProduct = 0x1000,
+ .bcdDevice_hi = 0x0126,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STATUS_INTERVAL },
+ /* SiGma Micro USB Web Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x1c4f,
+ .idProduct = 0x3000,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_IGNORE_SELECTOR_UNIT},
+ /* Acer OEM Webcam - Unknown vendor */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0100,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Packard Bell OEM Webcam */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0101,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Acer Crystal Eye webcam */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0102,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Acer OrbiCam - Unknown vendor */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x5986,
+ .idProduct = 0x0200,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, uvc_ids);
+
+struct uvc_driver uvc_driver = {
+ .driver = {
+ .name = "uvcvideo",
+ .probe = uvc_probe,
+ .disconnect = uvc_disconnect,
+ .suspend = uvc_suspend,
+ .resume = uvc_resume,
+ .id_table = uvc_ids,
+ .supports_autosuspend = 1,
+ },
+};
+
+static int __init uvc_init(void)
+{
+ int result;
+
+ INIT_LIST_HEAD(&uvc_driver.devices);
+ INIT_LIST_HEAD(&uvc_driver.controls);
+ mutex_init(&uvc_driver.open_mutex);
+ mutex_init(&uvc_driver.ctrl_mutex);
+
+ uvc_ctrl_init();
+
+ result = usb_register(&uvc_driver.driver);
+ if (result == 0)
+ printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n");
+ return result;
+}
+
+static void __exit uvc_cleanup(void)
+{
+ usb_deregister(&uvc_driver.driver);
+}
+
+module_init(uvc_init);
+module_exit(uvc_cleanup);
+
+module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(quirks, "Forced device quirks");
+module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c
new file mode 100644
index 00000000000..37bdefdbead
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_isight.c
@@ -0,0 +1,134 @@
+/*
+ * uvc_isight.c -- USB Video Class driver - iSight support
+ *
+ * Copyright (C) 2006-2007
+ * Ivan N. Zlatev <contact@i-nz.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include "uvcvideo.h"
+
+/* Built-in iSight webcams implements most of UVC 1.0 except a
+ * different packet format. Instead of sending a header at the
+ * beginning of each isochronous transfer payload, the webcam sends a
+ * single header per image (on its own in a packet), followed by
+ * packets containing data only.
+ *
+ * Offset Size (bytes) Description
+ * ------------------------------------------------------------------
+ * 0x00 1 Header length
+ * 0x01 1 Flags (UVC-compliant)
+ * 0x02 4 Always equal to '11223344'
+ * 0x06 8 Always equal to 'deadbeefdeadface'
+ * 0x0e 16 Unknown
+ *
+ * The header can be prefixed by an optional, unknown-purpose byte.
+ */
+
+static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf,
+ const __u8 *data, unsigned int len)
+{
+ static const __u8 hdr[] = {
+ 0x11, 0x22, 0x33, 0x44,
+ 0xde, 0xad, 0xbe, 0xef,
+ 0xde, 0xad, 0xfa, 0xce
+ };
+
+ unsigned int maxlen, nbytes;
+ __u8 *mem;
+ int is_header = 0;
+
+ if (buf == NULL)
+ return 0;
+
+ if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) ||
+ (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) {
+ uvc_trace(UVC_TRACE_FRAME, "iSight header found\n");
+ is_header = 1;
+ }
+
+ /* Synchronize to the input stream by waiting for a header packet. */
+ if (buf->state != UVC_BUF_STATE_ACTIVE) {
+ if (!is_header) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of "
+ "sync).\n");
+ return 0;
+ }
+
+ buf->state = UVC_BUF_STATE_ACTIVE;
+ }
+
+ /* Mark the buffer as done if we're at the beginning of a new frame.
+ *
+ * Empty buffers (bytesused == 0) don't trigger end of frame detection
+ * as it doesn't make sense to return an empty buffer.
+ */
+ if (is_header && buf->buf.bytesused != 0) {
+ buf->state = UVC_BUF_STATE_DONE;
+ return -EAGAIN;
+ }
+
+ /* Copy the video data to the buffer. Skip header packets, as they
+ * contain no data.
+ */
+ if (!is_header) {
+ maxlen = buf->buf.length - buf->buf.bytesused;
+ mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused;
+ nbytes = min(len, maxlen);
+ memcpy(mem, data, nbytes);
+ buf->buf.bytesused += nbytes;
+
+ if (len > maxlen || buf->buf.bytesused == buf->buf.length) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete "
+ "(overflow).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ }
+ }
+
+ return 0;
+}
+
+void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf)
+{
+ int ret, i;
+
+ for (i = 0; i < urb->number_of_packets; ++i) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
+ "lost (%d).\n",
+ urb->iso_frame_desc[i].status);
+ }
+
+ /* Decode the payload packet.
+ * uvc_video_decode is entered twice when a frame transition
+ * has been detected because the end of frame can only be
+ * reliably detected when the first packet of the new frame
+ * is processed. The first pass detects the transition and
+ * closes the previous frame's buffer, the second pass
+ * processes the data of the first payload of the new frame.
+ */
+ do {
+ ret = isight_decode(&video->queue, buf,
+ urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].actual_length);
+
+ if (buf == NULL)
+ break;
+
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+ }
+}
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
new file mode 100644
index 00000000000..0923f0e3b3d
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -0,0 +1,477 @@
+/*
+ * uvc_queue.c -- USB Video Class driver - Buffers management
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * Video buffers queue management.
+ *
+ * Video queues is initialized by uvc_queue_init(). The function performs
+ * basic initialization of the uvc_video_queue struct and never fails.
+ *
+ * Video buffer allocation and freeing are performed by uvc_alloc_buffers and
+ * uvc_free_buffers respectively. The former acquires the video queue lock,
+ * while the later must be called with the lock held (so that allocation can
+ * free previously allocated buffers). Trying to free buffers that are mapped
+ * to user space will return -EBUSY.
+ *
+ * Video buffers are managed using two queues. However, unlike most USB video
+ * drivers which use an in queue and an out queue, we use a main queue which
+ * holds all queued buffers (both 'empty' and 'done' buffers), and an irq
+ * queue which holds empty buffers. This design (copied from video-buf)
+ * minimizes locking in interrupt, as only one queue is shared between
+ * interrupt and user contexts.
+ *
+ * Use cases
+ * ---------
+ *
+ * Unless stated otherwise, all operations which modify the irq buffers queue
+ * are protected by the irq spinlock.
+ *
+ * 1. The user queues the buffers, starts streaming and dequeues a buffer.
+ *
+ * The buffers are added to the main and irq queues. Both operations are
+ * protected by the queue lock, and the latert is protected by the irq
+ * spinlock as well.
+ *
+ * The completion handler fetches a buffer from the irq queue and fills it
+ * with video data. If no buffer is available (irq queue empty), the handler
+ * returns immediately.
+ *
+ * When the buffer is full, the completion handler removes it from the irq
+ * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue.
+ * At that point, any process waiting on the buffer will be woken up. If a
+ * process tries to dequeue a buffer after it has been marked ready, the
+ * dequeing will succeed immediately.
+ *
+ * 2. Buffers are queued, user is waiting on a buffer and the device gets
+ * disconnected.
+ *
+ * When the device is disconnected, the kernel calls the completion handler
+ * with an appropriate status code. The handler marks all buffers in the
+ * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so
+ * that any process waiting on a buffer gets woken up.
+ *
+ * Waking up up the first buffer on the irq list is not enough, as the
+ * process waiting on the buffer might restart the dequeue operation
+ * immediately.
+ *
+ */
+
+void uvc_queue_init(struct uvc_video_queue *queue)
+{
+ mutex_init(&queue->mutex);
+ spin_lock_init(&queue->irqlock);
+ INIT_LIST_HEAD(&queue->mainqueue);
+ INIT_LIST_HEAD(&queue->irqqueue);
+}
+
+/*
+ * Allocate the video buffers.
+ *
+ * Pages are reserved to make sure they will not be swaped, as they will be
+ * filled in URB completion handler.
+ *
+ * Buffers will be individually mapped, so they must all be page aligned.
+ */
+int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+ unsigned int buflength)
+{
+ unsigned int bufsize = PAGE_ALIGN(buflength);
+ unsigned int i;
+ void *mem = NULL;
+ int ret;
+
+ if (nbuffers > UVC_MAX_VIDEO_BUFFERS)
+ nbuffers = UVC_MAX_VIDEO_BUFFERS;
+
+ mutex_lock(&queue->mutex);
+
+ if ((ret = uvc_free_buffers(queue)) < 0)
+ goto done;
+
+ /* Bail out if no buffers should be allocated. */
+ if (nbuffers == 0)
+ goto done;
+
+ /* Decrement the number of buffers until allocation succeeds. */
+ for (; nbuffers > 0; --nbuffers) {
+ mem = vmalloc_32(nbuffers * bufsize);
+ if (mem != NULL)
+ break;
+ }
+
+ if (mem == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ for (i = 0; i < nbuffers; ++i) {
+ memset(&queue->buffer[i], 0, sizeof queue->buffer[i]);
+ queue->buffer[i].buf.index = i;
+ queue->buffer[i].buf.m.offset = i * bufsize;
+ queue->buffer[i].buf.length = buflength;
+ queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ queue->buffer[i].buf.sequence = 0;
+ queue->buffer[i].buf.field = V4L2_FIELD_NONE;
+ queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP;
+ queue->buffer[i].buf.flags = 0;
+ init_waitqueue_head(&queue->buffer[i].wait);
+ }
+
+ queue->mem = mem;
+ queue->count = nbuffers;
+ queue->buf_size = bufsize;
+ ret = nbuffers;
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+static void __uvc_query_buffer(struct uvc_buffer *buf,
+ struct v4l2_buffer *v4l2_buf)
+{
+ memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf);
+
+ if (buf->vma_use_count)
+ v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED;
+
+ switch (buf->state) {
+ case UVC_BUF_STATE_ERROR:
+ case UVC_BUF_STATE_DONE:
+ v4l2_buf->flags |= V4L2_BUF_FLAG_DONE;
+ break;
+ case UVC_BUF_STATE_QUEUED:
+ case UVC_BUF_STATE_ACTIVE:
+ v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
+ break;
+ case UVC_BUF_STATE_IDLE:
+ default:
+ break;
+ }
+}
+
+int uvc_query_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf)
+{
+ int ret = 0;
+
+ mutex_lock(&queue->mutex);
+ if (v4l2_buf->index >= queue->count) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Queue a video buffer. Attempting to queue a buffer that has already been
+ * queued will return -EINVAL.
+ */
+int uvc_queue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf)
+{
+ struct uvc_buffer *buf;
+ unsigned long flags;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index);
+
+ if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+ "and/or memory (%u).\n", v4l2_buf->type,
+ v4l2_buf->memory);
+ return -EINVAL;
+ }
+
+ mutex_lock(&queue->mutex);
+ if (v4l2_buf->index >= queue->count) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
+ ret = -EINVAL;
+ goto done;
+ }
+
+ buf = &queue->buffer[v4l2_buf->index];
+ if (buf->state != UVC_BUF_STATE_IDLE) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state "
+ "(%u).\n", buf->state);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ if (queue->flags & UVC_QUEUE_DISCONNECTED) {
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+ ret = -ENODEV;
+ goto done;
+ }
+ buf->state = UVC_BUF_STATE_QUEUED;
+ buf->buf.bytesused = 0;
+ list_add_tail(&buf->stream, &queue->mainqueue);
+ list_add_tail(&buf->queue, &queue->irqqueue);
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking)
+{
+ if (nonblocking) {
+ return (buf->state != UVC_BUF_STATE_QUEUED &&
+ buf->state != UVC_BUF_STATE_ACTIVE)
+ ? 0 : -EAGAIN;
+ }
+
+ return wait_event_interruptible(buf->wait,
+ buf->state != UVC_BUF_STATE_QUEUED &&
+ buf->state != UVC_BUF_STATE_ACTIVE);
+}
+
+/*
+ * Dequeue a video buffer. If nonblocking is false, block until a buffer is
+ * available.
+ */
+int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf, int nonblocking)
+{
+ struct uvc_buffer *buf;
+ int ret = 0;
+
+ if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+ "and/or memory (%u).\n", v4l2_buf->type,
+ v4l2_buf->memory);
+ return -EINVAL;
+ }
+
+ mutex_lock(&queue->mutex);
+ if (list_empty(&queue->mainqueue)) {
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n");
+ ret = -EINVAL;
+ goto done;
+ }
+
+ buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+ if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0)
+ goto done;
+
+ uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n",
+ buf->buf.index, buf->state, buf->buf.bytesused);
+
+ switch (buf->state) {
+ case UVC_BUF_STATE_ERROR:
+ uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data "
+ "(transmission error).\n");
+ ret = -EIO;
+ case UVC_BUF_STATE_DONE:
+ buf->state = UVC_BUF_STATE_IDLE;
+ break;
+
+ case UVC_BUF_STATE_IDLE:
+ case UVC_BUF_STATE_QUEUED:
+ case UVC_BUF_STATE_ACTIVE:
+ default:
+ uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
+ "(driver bug?).\n", buf->state);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ list_del(&buf->stream);
+ __uvc_query_buffer(buf, v4l2_buf);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Poll the video queue.
+ *
+ * This function implements video queue polling and is intended to be used by
+ * the device poll handler.
+ */
+unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+ poll_table *wait)
+{
+ struct uvc_buffer *buf;
+ unsigned int mask = 0;
+
+ mutex_lock(&queue->mutex);
+ if (list_empty(&queue->mainqueue)) {
+ mask |= POLLERR;
+ goto done;
+ }
+ buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+
+ poll_wait(file, &buf->wait, wait);
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ mask |= POLLIN | POLLRDNORM;
+
+done:
+ mutex_unlock(&queue->mutex);
+ return mask;
+}
+
+/*
+ * Enable or disable the video buffers queue.
+ *
+ * The queue must be enabled before starting video acquisition and must be
+ * disabled after stopping it. This ensures that the video buffers queue
+ * state can be properly initialized before buffers are accessed from the
+ * interrupt handler.
+ *
+ * Enabling the video queue initializes parameters (such as sequence number,
+ * sync pattern, ...). If the queue is already enabled, return -EBUSY.
+ *
+ * Disabling the video queue cancels the queue and removes all buffers from
+ * the main queue.
+ *
+ * This function can't be called from interrupt context. Use
+ * uvc_queue_cancel() instead.
+ */
+int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+{
+ unsigned int i;
+ int ret = 0;
+
+ mutex_lock(&queue->mutex);
+ if (enable) {
+ if (uvc_queue_streaming(queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+ queue->sequence = 0;
+ queue->flags |= UVC_QUEUE_STREAMING;
+ } else {
+ uvc_queue_cancel(queue, 0);
+ INIT_LIST_HEAD(&queue->mainqueue);
+
+ for (i = 0; i < queue->count; ++i)
+ queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+
+ queue->flags &= ~UVC_QUEUE_STREAMING;
+ }
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and remove them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+ struct uvc_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ while (!list_empty(&queue->irqqueue)) {
+ buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_ERROR;
+ wake_up(&buf->wait);
+ }
+ /* This must be protected by the irqlock spinlock to avoid race
+ * conditions between uvc_queue_buffer and the disconnection event that
+ * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+ * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+ * state outside the queue code.
+ */
+ if (disconnect)
+ queue->flags |= UVC_QUEUE_DISCONNECTED;
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+ struct uvc_buffer *buf)
+{
+ struct uvc_buffer *nextbuf;
+ unsigned long flags;
+
+ if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
+ buf->buf.length != buf->buf.bytesused) {
+ buf->state = UVC_BUF_STATE_QUEUED;
+ buf->buf.bytesused = 0;
+ return buf;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ list_del(&buf->queue);
+ if (!list_empty(&queue->irqqueue))
+ nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ else
+ nextbuf = NULL;
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+ buf->buf.sequence = queue->sequence++;
+ do_gettimeofday(&buf->buf.timestamp);
+
+ wake_up(&buf->wait);
+ return nextbuf;
+}
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
new file mode 100644
index 00000000000..be9084e5eac
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -0,0 +1,207 @@
+/*
+ * uvc_status.c -- USB Video Class driver - Status endpoint
+ *
+ * Copyright (C) 2007-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+
+#include "uvcvideo.h"
+
+/* --------------------------------------------------------------------------
+ * Input device
+ */
+static int uvc_input_init(struct uvc_device *dev)
+{
+ struct usb_device *udev = dev->udev;
+ struct input_dev *input;
+ char *phys = NULL;
+ int ret;
+
+ input = input_allocate_device();
+ if (input == NULL)
+ return -ENOMEM;
+
+ phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath),
+ GFP_KERNEL);
+ if (phys == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+ sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath);
+
+ input->name = dev->name;
+ input->phys = phys;
+ usb_to_input_id(udev, &input->id);
+ input->dev.parent = &dev->intf->dev;
+
+ set_bit(EV_KEY, input->evbit);
+ set_bit(BTN_0, input->keybit);
+
+ if ((ret = input_register_device(input)) < 0)
+ goto error;
+
+ dev->input = input;
+ return 0;
+
+error:
+ input_free_device(input);
+ kfree(phys);
+ return ret;
+}
+
+static void uvc_input_cleanup(struct uvc_device *dev)
+{
+ if (dev->input)
+ input_unregister_device(dev->input);
+}
+
+/* --------------------------------------------------------------------------
+ * Status interrupt endpoint
+ */
+static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len)
+{
+ if (len < 3) {
+ uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event "
+ "received.\n");
+ return;
+ }
+
+ if (data[2] == 0) {
+ if (len < 4)
+ return;
+ uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
+ data[1], data[3] ? "pressed" : "released", len);
+ if (dev->input)
+ input_report_key(dev->input, BTN_0, data[3]);
+ } else {
+ uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
+ "len %d.\n", data[1], data[2], data[3], len);
+ }
+}
+
+static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len)
+{
+ char *attrs[3] = { "value", "info", "failure" };
+
+ if (len < 6 || data[2] != 0 || data[4] > 2) {
+ uvc_trace(UVC_TRACE_STATUS, "Invalid control status event "
+ "received.\n");
+ return;
+ }
+
+ uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n",
+ data[1], data[3], attrs[data[4]], len);
+}
+
+static void uvc_status_complete(struct urb *urb)
+{
+ struct uvc_device *dev = urb->context;
+ int len, ret;
+
+ switch (urb->status) {
+ case 0:
+ break;
+
+ case -ENOENT: /* usb_kill_urb() called. */
+ case -ECONNRESET: /* usb_unlink_urb() called. */
+ case -ESHUTDOWN: /* The endpoint is being disabled. */
+ case -EPROTO: /* Device is disconnected (reported by some
+ * host controller). */
+ return;
+
+ default:
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in status "
+ "completion handler.\n", urb->status);
+ return;
+ }
+
+ len = urb->actual_length;
+ if (len > 0) {
+ switch (dev->status[0] & 0x0f) {
+ case UVC_STATUS_TYPE_CONTROL:
+ uvc_event_control(dev, dev->status, len);
+ break;
+
+ case UVC_STATUS_TYPE_STREAMING:
+ uvc_event_streaming(dev, dev->status, len);
+ break;
+
+ default:
+ uvc_printk(KERN_INFO, "unknown event type %u.\n",
+ dev->status[0]);
+ break;
+ }
+ }
+
+ /* Resubmit the URB. */
+ urb->interval = dev->int_ep->desc.bInterval;
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n",
+ ret);
+ }
+}
+
+int uvc_status_init(struct uvc_device *dev)
+{
+ struct usb_host_endpoint *ep = dev->int_ep;
+ unsigned int pipe;
+ int interval;
+
+ if (ep == NULL)
+ return 0;
+
+ uvc_input_init(dev);
+
+ dev->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (dev->int_urb == NULL)
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+ */
+ interval = ep->desc.bInterval;
+ if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH &&
+ (dev->quirks & UVC_QUIRK_STATUS_INTERVAL))
+ interval = fls(interval) - 1;
+
+ usb_fill_int_urb(dev->int_urb, dev->udev, pipe,
+ dev->status, sizeof dev->status, uvc_status_complete,
+ dev, interval);
+
+ return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+}
+
+void uvc_status_cleanup(struct uvc_device *dev)
+{
+ usb_kill_urb(dev->int_urb);
+ usb_free_urb(dev->int_urb);
+ uvc_input_cleanup(dev);
+}
+
+int uvc_status_suspend(struct uvc_device *dev)
+{
+ usb_kill_urb(dev->int_urb);
+ return 0;
+}
+
+int uvc_status_resume(struct uvc_device *dev)
+{
+ if (dev->int_urb == NULL)
+ return 0;
+
+ return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+}
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
new file mode 100644
index 00000000000..2e0a66575bb
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -0,0 +1,1105 @@
+/*
+ * uvc_v4l2.c -- USB Video Class driver - V4L2 API
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * V4L2 interface
+ */
+
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls which can be mapped directly, and handle the others
+ * manually.
+ */
+static int uvc_v4l2_query_menu(struct uvc_video_device *video,
+ struct v4l2_querymenu *query_menu)
+{
+ struct uvc_menu_info *menu_info;
+ struct uvc_control_mapping *mapping;
+ struct uvc_control *ctrl;
+
+ ctrl = uvc_find_control(video, query_menu->id, &mapping);
+ if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
+ return -EINVAL;
+
+ if (query_menu->index >= mapping->menu_count)
+ return -EINVAL;
+
+ menu_info = &mapping->menu_info[query_menu->index];
+ strncpy(query_menu->name, menu_info->name, 32);
+ return 0;
+}
+
+/*
+ * Find the frame interval closest to the requested frame interval for the
+ * given frame format and size. This should be done by the device as part of
+ * the Video Probe and Commit negotiation, but some hardware don't implement
+ * that feature.
+ */
+static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval)
+{
+ unsigned int i;
+
+ if (frame->bFrameIntervalType) {
+ __u32 best = -1, dist;
+
+ for (i = 0; i < frame->bFrameIntervalType; ++i) {
+ dist = interval > frame->dwFrameInterval[i]
+ ? interval - frame->dwFrameInterval[i]
+ : frame->dwFrameInterval[i] - interval;
+
+ if (dist > best)
+ break;
+
+ best = dist;
+ }
+
+ interval = frame->dwFrameInterval[i-1];
+ } else {
+ const __u32 min = frame->dwFrameInterval[0];
+ const __u32 max = frame->dwFrameInterval[1];
+ const __u32 step = frame->dwFrameInterval[2];
+
+ interval = min + (interval - min + step/2) / step * step;
+ if (interval > max)
+ interval = max;
+ }
+
+ return interval;
+}
+
+static int uvc_v4l2_try_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt, struct uvc_streaming_control *probe,
+ struct uvc_format **uvc_format, struct uvc_frame **uvc_frame)
+{
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ __u16 rw, rh;
+ unsigned int d, maxd;
+ unsigned int i;
+ __u32 interval;
+ int ret = 0;
+ __u8 *fcc;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ fcc = (__u8 *)&fmt->fmt.pix.pixelformat;
+ uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n",
+ fmt->fmt.pix.pixelformat,
+ fcc[0], fcc[1], fcc[2], fcc[3],
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+
+ /* Check if the hardware supports the requested format. */
+ for (i = 0; i < video->streaming->nformats; ++i) {
+ format = &video->streaming->format[i];
+ if (format->fcc == fmt->fmt.pix.pixelformat)
+ break;
+ }
+
+ if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n",
+ fmt->fmt.pix.pixelformat);
+ return -EINVAL;
+ }
+
+ /* Find the closest image size. The distance between image sizes is
+ * the size in pixels of the non-overlapping regions between the
+ * requested size and the frame-specified size.
+ */
+ rw = fmt->fmt.pix.width;
+ rh = fmt->fmt.pix.height;
+ maxd = (unsigned int)-1;
+
+ for (i = 0; i < format->nframes; ++i) {
+ __u16 w = format->frame[i].wWidth;
+ __u16 h = format->frame[i].wHeight;
+
+ d = min(w, rw) * min(h, rh);
+ d = w*h + rw*rh - 2*d;
+ if (d < maxd) {
+ maxd = d;
+ frame = &format->frame[i];
+ }
+
+ if (maxd == 0)
+ break;
+ }
+
+ if (frame == NULL) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n",
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+ return -EINVAL;
+ }
+
+ /* Use the default frame interval. */
+ interval = frame->dwDefaultFrameInterval;
+ uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us "
+ "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval,
+ (100000000/interval)%10);
+
+ /* Set the format index, frame index and frame interval. */
+ memset(probe, 0, sizeof *probe);
+ probe->bmHint = 1; /* dwFrameInterval */
+ probe->bFormatIndex = format->index;
+ probe->bFrameIndex = frame->bFrameIndex;
+ probe->dwFrameInterval = uvc_try_frame_interval(frame, interval);
+ /* Some webcams stall the probe control set request when the
+ * dwMaxVideoFrameSize field is set to zero. The UVC specification
+ * clearly states that the field is read-only from the host, so this
+ * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by
+ * the webcam to work around the problem.
+ *
+ * The workaround could probably be enabled for all webcams, so the
+ * quirk can be removed if needed. It's currently useful to detect
+ * webcam bugs and fix them before they hit the market (providing
+ * developers test their webcams with the Linux driver as well as with
+ * the Windows driver).
+ */
+ if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
+ probe->dwMaxVideoFrameSize =
+ video->streaming->ctrl.dwMaxVideoFrameSize;
+
+ /* Probe the device */
+ if ((ret = uvc_probe_video(video, probe)) < 0)
+ goto done;
+
+ fmt->fmt.pix.width = frame->wWidth;
+ fmt->fmt.pix.height = frame->wHeight;
+ fmt->fmt.pix.field = V4L2_FIELD_NONE;
+ fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8;
+ fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+ fmt->fmt.pix.colorspace = format->colorspace;
+ fmt->fmt.pix.priv = 0;
+
+ if (uvc_format != NULL)
+ *uvc_format = format;
+ if (uvc_frame != NULL)
+ *uvc_frame = frame;
+
+done:
+ return ret;
+}
+
+static int uvc_v4l2_get_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt)
+{
+ struct uvc_format *format = video->streaming->cur_format;
+ struct uvc_frame *frame = video->streaming->cur_frame;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (format == NULL || frame == NULL)
+ return -EINVAL;
+
+ fmt->fmt.pix.pixelformat = format->fcc;
+ fmt->fmt.pix.width = frame->wWidth;
+ fmt->fmt.pix.height = frame->wHeight;
+ fmt->fmt.pix.field = V4L2_FIELD_NONE;
+ fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8;
+ fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize;
+ fmt->fmt.pix.colorspace = format->colorspace;
+ fmt->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int uvc_v4l2_set_format(struct uvc_video_device *video,
+ struct v4l2_format *fmt)
+{
+ struct uvc_streaming_control probe;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ int ret;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (uvc_queue_streaming(&video->queue))
+ return -EBUSY;
+
+ ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame);
+ if (ret < 0)
+ return ret;
+
+ if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0)
+ return ret;
+
+ memcpy(&video->streaming->ctrl, &probe, sizeof probe);
+ video->streaming->cur_format = format;
+ video->streaming->cur_frame = frame;
+
+ return 0;
+}
+
+static int uvc_v4l2_get_streamparm(struct uvc_video_device *video,
+ struct v4l2_streamparm *parm)
+{
+ uint32_t numerator, denominator;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ numerator = video->streaming->ctrl.dwFrameInterval;
+ denominator = 10000000;
+ uvc_simplify_fraction(&numerator, &denominator, 8, 333);
+
+ memset(parm, 0, sizeof *parm);
+ parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+ parm->parm.capture.capturemode = 0;
+ parm->parm.capture.timeperframe.numerator = numerator;
+ parm->parm.capture.timeperframe.denominator = denominator;
+ parm->parm.capture.extendedmode = 0;
+ parm->parm.capture.readbuffers = 0;
+
+ return 0;
+}
+
+static int uvc_v4l2_set_streamparm(struct uvc_video_device *video,
+ struct v4l2_streamparm *parm)
+{
+ struct uvc_frame *frame = video->streaming->cur_frame;
+ struct uvc_streaming_control probe;
+ uint32_t interval;
+ int ret;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (uvc_queue_streaming(&video->queue))
+ return -EBUSY;
+
+ memcpy(&probe, &video->streaming->ctrl, sizeof probe);
+ interval = uvc_fraction_to_interval(
+ parm->parm.capture.timeperframe.numerator,
+ parm->parm.capture.timeperframe.denominator);
+
+ uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
+ parm->parm.capture.timeperframe.numerator,
+ parm->parm.capture.timeperframe.denominator,
+ interval);
+ probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+ /* Probe the device with the new settings. */
+ if ((ret = uvc_probe_video(video, &probe)) < 0)
+ return ret;
+
+ /* Commit the new settings. */
+ if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0)
+ return ret;
+
+ memcpy(&video->streaming->ctrl, &probe, sizeof probe);
+
+ /* Return the actual frame period. */
+ parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval;
+ parm->parm.capture.timeperframe.denominator = 10000000;
+ uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator,
+ &parm->parm.capture.timeperframe.denominator,
+ 8, 333);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------
+ * Privilege management
+ */
+
+/*
+ * Privilege management is the multiple-open implementation basis. The current
+ * implementation is completely transparent for the end-user and doesn't
+ * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls.
+ * Those ioctls enable finer control on the device (by making possible for a
+ * user to request exclusive access to a device), but are not mature yet.
+ * Switching to the V4L2 priority mechanism might be considered in the future
+ * if this situation changes.
+ *
+ * Each open instance of a UVC device can either be in a privileged or
+ * unprivileged state. Only a single instance can be in a privileged state at
+ * a given time. Trying to perform an operation which requires privileges will
+ * automatically acquire the required privileges if possible, or return -EBUSY
+ * otherwise. Privileges are dismissed when closing the instance.
+ *
+ * Operations which require privileges are:
+ *
+ * - VIDIOC_S_INPUT
+ * - VIDIOC_S_PARM
+ * - VIDIOC_S_FMT
+ * - VIDIOC_TRY_FMT
+ * - VIDIOC_REQBUFS
+ */
+static int uvc_acquire_privileges(struct uvc_fh *handle)
+{
+ int ret = 0;
+
+ /* Always succeed if the handle is already privileged. */
+ if (handle->state == UVC_HANDLE_ACTIVE)
+ return 0;
+
+ /* Check if the device already has a privileged handle. */
+ mutex_lock(&uvc_driver.open_mutex);
+ if (atomic_inc_return(&handle->device->active) != 1) {
+ atomic_dec(&handle->device->active);
+ ret = -EBUSY;
+ goto done;
+ }
+
+ handle->state = UVC_HANDLE_ACTIVE;
+
+done:
+ mutex_unlock(&uvc_driver.open_mutex);
+ return ret;
+}
+
+static void uvc_dismiss_privileges(struct uvc_fh *handle)
+{
+ if (handle->state == UVC_HANDLE_ACTIVE)
+ atomic_dec(&handle->device->active);
+
+ handle->state = UVC_HANDLE_PASSIVE;
+}
+
+static int uvc_has_privileges(struct uvc_fh *handle)
+{
+ return handle->state == UVC_HANDLE_ACTIVE;
+}
+
+/* ------------------------------------------------------------------------
+ * V4L2 file operations
+ */
+
+static int uvc_v4l2_open(struct inode *inode, struct file *file)
+{
+ struct video_device *vdev;
+ struct uvc_video_device *video;
+ struct uvc_fh *handle;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n");
+ mutex_lock(&uvc_driver.open_mutex);
+ vdev = video_devdata(file);
+ video = video_get_drvdata(vdev);
+
+ if (video->dev->state & UVC_DEV_DISCONNECTED) {
+ ret = -ENODEV;
+ goto done;
+ }
+
+ ret = usb_autopm_get_interface(video->dev->intf);
+ if (ret < 0)
+ goto done;
+
+ /* Create the device handle. */
+ handle = kzalloc(sizeof *handle, GFP_KERNEL);
+ if (handle == NULL) {
+ usb_autopm_put_interface(video->dev->intf);
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ handle->device = video;
+ handle->state = UVC_HANDLE_PASSIVE;
+ file->private_data = handle;
+
+ kref_get(&video->dev->kref);
+
+done:
+ mutex_unlock(&uvc_driver.open_mutex);
+ return ret;
+}
+
+static int uvc_v4l2_release(struct inode *inode, struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n");
+
+ /* Only free resources if this is a privileged handle. */
+ if (uvc_has_privileges(handle)) {
+ uvc_video_enable(video, 0);
+
+ mutex_lock(&video->queue.mutex);
+ if (uvc_free_buffers(&video->queue) < 0)
+ uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
+ "free buffers.\n");
+ mutex_unlock(&video->queue.mutex);
+ }
+
+ /* Release the file handle. */
+ uvc_dismiss_privileges(handle);
+ kfree(handle);
+ file->private_data = NULL;
+
+ usb_autopm_put_interface(video->dev->intf);
+ kref_put(&video->dev->kref, uvc_delete);
+ return 0;
+}
+
+static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
+ int ret = 0;
+
+ if (uvc_trace_param & UVC_TRACE_IOCTL)
+ v4l_printk_ioctl(cmd);
+
+ switch (cmd) {
+ /* Query capabilities */
+ case VIDIOC_QUERYCAP:
+ {
+ struct v4l2_capability *cap = arg;
+
+ memset(cap, 0, sizeof *cap);
+ strncpy(cap->driver, "uvcvideo", sizeof cap->driver);
+ strncpy(cap->card, vdev->name, 32);
+ strncpy(cap->bus_info, video->dev->udev->bus->bus_name,
+ sizeof cap->bus_info);
+ cap->version = DRIVER_VERSION_NUMBER;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
+ | V4L2_CAP_STREAMING;
+ break;
+ }
+
+ /* Get, Set & Query control */
+ case VIDIOC_QUERYCTRL:
+ return uvc_query_v4l2_ctrl(video, arg);
+
+ case VIDIOC_G_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+ struct v4l2_ext_control xctrl;
+
+ memset(&xctrl, 0, sizeof xctrl);
+ xctrl.id = ctrl->id;
+
+ uvc_ctrl_begin(video);
+ ret = uvc_ctrl_get(video, &xctrl);
+ uvc_ctrl_rollback(video);
+ if (ret >= 0)
+ ctrl->value = xctrl.value;
+ break;
+ }
+
+ case VIDIOC_S_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+ struct v4l2_ext_control xctrl;
+
+ memset(&xctrl, 0, sizeof xctrl);
+ xctrl.id = ctrl->id;
+ xctrl.value = ctrl->value;
+
+ uvc_ctrl_begin(video);
+ ret = uvc_ctrl_set(video, &xctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ return ret;
+ }
+ ret = uvc_ctrl_commit(video);
+ break;
+ }
+
+ case VIDIOC_QUERYMENU:
+ return uvc_v4l2_query_menu(video, arg);
+
+ case VIDIOC_G_EXT_CTRLS:
+ {
+ struct v4l2_ext_controls *ctrls = arg;
+ struct v4l2_ext_control *ctrl = ctrls->controls;
+ unsigned int i;
+
+ uvc_ctrl_begin(video);
+ for (i = 0; i < ctrls->count; ++ctrl, ++i) {
+ ret = uvc_ctrl_get(video, ctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ ctrls->error_idx = i;
+ return ret;
+ }
+ }
+ ctrls->error_idx = 0;
+ ret = uvc_ctrl_rollback(video);
+ break;
+ }
+
+ case VIDIOC_S_EXT_CTRLS:
+ case VIDIOC_TRY_EXT_CTRLS:
+ {
+ struct v4l2_ext_controls *ctrls = arg;
+ struct v4l2_ext_control *ctrl = ctrls->controls;
+ unsigned int i;
+
+ ret = uvc_ctrl_begin(video);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ctrls->count; ++ctrl, ++i) {
+ ret = uvc_ctrl_set(video, ctrl);
+ if (ret < 0) {
+ uvc_ctrl_rollback(video);
+ ctrls->error_idx = i;
+ return ret;
+ }
+ }
+
+ ctrls->error_idx = 0;
+
+ if (cmd == VIDIOC_S_EXT_CTRLS)
+ ret = uvc_ctrl_commit(video);
+ else
+ ret = uvc_ctrl_rollback(video);
+ break;
+ }
+
+ /* Get, Set & Enum input */
+ case VIDIOC_ENUMINPUT:
+ {
+ const struct uvc_entity *selector = video->selector;
+ struct v4l2_input *input = arg;
+ struct uvc_entity *iterm = NULL;
+ u32 index = input->index;
+ int pin = 0;
+
+ if (selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ if (index != 0)
+ return -EINVAL;
+ iterm = list_first_entry(&video->iterms,
+ struct uvc_entity, chain);
+ pin = iterm->id;
+ } else if (pin < selector->selector.bNrInPins) {
+ pin = selector->selector.baSourceID[index];
+ list_for_each_entry(iterm, video->iterms.next, chain) {
+ if (iterm->id == pin)
+ break;
+ }
+ }
+
+ if (iterm == NULL || iterm->id != pin)
+ return -EINVAL;
+
+ memset(input, 0, sizeof *input);
+ input->index = index;
+ strncpy(input->name, iterm->name, sizeof input->name);
+ if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA)
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+ break;
+ }
+
+ case VIDIOC_G_INPUT:
+ {
+ u8 input;
+
+ if (video->selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ *(int *)arg = 0;
+ break;
+ }
+
+ ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id,
+ video->dev->intfnum, SU_INPUT_SELECT_CONTROL,
+ &input, 1);
+ if (ret < 0)
+ return ret;
+
+ *(int *)arg = input - 1;
+ break;
+ }
+
+ case VIDIOC_S_INPUT:
+ {
+ u8 input = *(u32 *)arg + 1;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ if (video->selector == NULL ||
+ (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
+ if (input != 1)
+ return -EINVAL;
+ break;
+ }
+
+ if (input > video->selector->selector.bNrInPins)
+ return -EINVAL;
+
+ return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id,
+ video->dev->intfnum, SU_INPUT_SELECT_CONTROL,
+ &input, 1);
+ }
+
+ /* Try, Get, Set & Enum format */
+ case VIDIOC_ENUM_FMT:
+ {
+ struct v4l2_fmtdesc *fmt = arg;
+ struct uvc_format *format;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ fmt->index >= video->streaming->nformats)
+ return -EINVAL;
+
+ format = &video->streaming->format[fmt->index];
+ fmt->flags = 0;
+ if (format->flags & UVC_FMT_FLAG_COMPRESSED)
+ fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ strncpy(fmt->description, format->name,
+ sizeof fmt->description);
+ fmt->description[sizeof fmt->description - 1] = 0;
+ fmt->pixelformat = format->fcc;
+ break;
+ }
+
+ case VIDIOC_TRY_FMT:
+ {
+ struct uvc_streaming_control probe;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL);
+ }
+
+ case VIDIOC_S_FMT:
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_set_format(video, arg);
+
+ case VIDIOC_G_FMT:
+ return uvc_v4l2_get_format(video, arg);
+
+ /* Frame size enumeration */
+ case VIDIOC_ENUM_FRAMESIZES:
+ {
+ struct v4l2_frmsizeenum *fsize = arg;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame;
+ int i;
+
+ /* Look for the given pixel format */
+ for (i = 0; i < video->streaming->nformats; i++) {
+ if (video->streaming->format[i].fcc ==
+ fsize->pixel_format) {
+ format = &video->streaming->format[i];
+ break;
+ }
+ }
+ if (format == NULL)
+ return -EINVAL;
+
+ if (fsize->index >= format->nframes)
+ return -EINVAL;
+
+ frame = &format->frame[fsize->index];
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = frame->wWidth;
+ fsize->discrete.height = frame->wHeight;
+ break;
+ }
+
+ /* Frame interval enumeration */
+ case VIDIOC_ENUM_FRAMEINTERVALS:
+ {
+ struct v4l2_frmivalenum *fival = arg;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ int i;
+
+ /* Look for the given pixel format and frame size */
+ for (i = 0; i < video->streaming->nformats; i++) {
+ if (video->streaming->format[i].fcc ==
+ fival->pixel_format) {
+ format = &video->streaming->format[i];
+ break;
+ }
+ }
+ if (format == NULL)
+ return -EINVAL;
+
+ for (i = 0; i < format->nframes; i++) {
+ if (format->frame[i].wWidth == fival->width &&
+ format->frame[i].wHeight == fival->height) {
+ frame = &format->frame[i];
+ break;
+ }
+ }
+ if (frame == NULL)
+ return -EINVAL;
+
+ if (frame->bFrameIntervalType) {
+ if (fival->index >= frame->bFrameIntervalType)
+ return -EINVAL;
+
+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+ fival->discrete.numerator =
+ frame->dwFrameInterval[fival->index];
+ fival->discrete.denominator = 10000000;
+ uvc_simplify_fraction(&fival->discrete.numerator,
+ &fival->discrete.denominator, 8, 333);
+ } else {
+ fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+ fival->stepwise.min.numerator =
+ frame->dwFrameInterval[0];
+ fival->stepwise.min.denominator = 10000000;
+ fival->stepwise.max.numerator =
+ frame->dwFrameInterval[1];
+ fival->stepwise.max.denominator = 10000000;
+ fival->stepwise.step.numerator =
+ frame->dwFrameInterval[2];
+ fival->stepwise.step.denominator = 10000000;
+ uvc_simplify_fraction(&fival->stepwise.min.numerator,
+ &fival->stepwise.min.denominator, 8, 333);
+ uvc_simplify_fraction(&fival->stepwise.max.numerator,
+ &fival->stepwise.max.denominator, 8, 333);
+ uvc_simplify_fraction(&fival->stepwise.step.numerator,
+ &fival->stepwise.step.denominator, 8, 333);
+ }
+ break;
+ }
+
+ /* Get & Set streaming parameters */
+ case VIDIOC_G_PARM:
+ return uvc_v4l2_get_streamparm(video, arg);
+
+ case VIDIOC_S_PARM:
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ return uvc_v4l2_set_streamparm(video, arg);
+
+ /* Cropping and scaling */
+ case VIDIOC_CROPCAP:
+ {
+ struct v4l2_cropcap *ccap = arg;
+ struct uvc_frame *frame = video->streaming->cur_frame;
+
+ if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ ccap->bounds.left = 0;
+ ccap->bounds.top = 0;
+ ccap->bounds.width = frame->wWidth;
+ ccap->bounds.height = frame->wHeight;
+
+ ccap->defrect = ccap->bounds;
+
+ ccap->pixelaspect.numerator = 1;
+ ccap->pixelaspect.denominator = 1;
+ break;
+ }
+
+ case VIDIOC_G_CROP:
+ case VIDIOC_S_CROP:
+ return -EINVAL;
+
+ /* Buffers & streaming */
+ case VIDIOC_REQBUFS:
+ {
+ struct v4l2_requestbuffers *rb = arg;
+ unsigned int bufsize =
+ video->streaming->ctrl.dwMaxVideoFrameSize;
+
+ if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb->memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if ((ret = uvc_acquire_privileges(handle)) < 0)
+ return ret;
+
+ ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize);
+ if (ret < 0)
+ return ret;
+
+ if (!(video->streaming->cur_format->flags &
+ UVC_FMT_FLAG_COMPRESSED))
+ video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE;
+
+ rb->count = ret;
+ ret = 0;
+ break;
+ }
+
+ case VIDIOC_QUERYBUF:
+ {
+ struct v4l2_buffer *buf = arg;
+
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_query_buffer(&video->queue, buf);
+ }
+
+ case VIDIOC_QBUF:
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_queue_buffer(&video->queue, arg);
+
+ case VIDIOC_DQBUF:
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_dequeue_buffer(&video->queue, arg,
+ file->f_flags & O_NONBLOCK);
+
+ case VIDIOC_STREAMON:
+ {
+ int *type = arg;
+
+ if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ if ((ret = uvc_video_enable(video, 1)) < 0)
+ return ret;
+ break;
+ }
+
+ case VIDIOC_STREAMOFF:
+ {
+ int *type = arg;
+
+ if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (!uvc_has_privileges(handle))
+ return -EBUSY;
+
+ return uvc_video_enable(video, 0);
+ }
+
+ /* Analog video standards make no sense for digital cameras. */
+ case VIDIOC_ENUMSTD:
+ case VIDIOC_QUERYSTD:
+ case VIDIOC_G_STD:
+ case VIDIOC_S_STD:
+
+ case VIDIOC_OVERLAY:
+
+ case VIDIOC_ENUMAUDIO:
+ case VIDIOC_ENUMAUDOUT:
+
+ case VIDIOC_ENUMOUTPUT:
+ uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd);
+ return -EINVAL;
+
+ /* Dynamic controls. */
+ case UVCIOC_CTRL_ADD:
+ {
+ struct uvc_xu_control_info *xinfo = arg;
+ struct uvc_control_info *info;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ info = kmalloc(sizeof *info, GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+
+ memcpy(info->entity, xinfo->entity, sizeof info->entity);
+ info->index = xinfo->index;
+ info->selector = xinfo->selector;
+ info->size = xinfo->size;
+ info->flags = xinfo->flags;
+
+ info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX |
+ UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF;
+
+ ret = uvc_ctrl_add_info(info);
+ if (ret < 0)
+ kfree(info);
+ break;
+ }
+
+ case UVCIOC_CTRL_MAP:
+ {
+ struct uvc_xu_control_mapping *xmap = arg;
+ struct uvc_control_mapping *map;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ map = kmalloc(sizeof *map, GFP_KERNEL);
+ if (map == NULL)
+ return -ENOMEM;
+
+ map->id = xmap->id;
+ memcpy(map->name, xmap->name, sizeof map->name);
+ memcpy(map->entity, xmap->entity, sizeof map->entity);
+ map->selector = xmap->selector;
+ map->size = xmap->size;
+ map->offset = xmap->offset;
+ map->v4l2_type = xmap->v4l2_type;
+ map->data_type = xmap->data_type;
+
+ ret = uvc_ctrl_add_mapping(map);
+ if (ret < 0)
+ kfree(map);
+ break;
+ }
+
+ case UVCIOC_CTRL_GET:
+ return uvc_xu_ctrl_query(video, arg, 0);
+
+ case UVCIOC_CTRL_SET:
+ return uvc_xu_ctrl_query(video, arg, 1);
+
+ default:
+ if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg,
+ uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
+ uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n",
+ cmd);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int uvc_v4l2_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n");
+ return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl);
+}
+
+static ssize_t uvc_v4l2_read(struct file *file, char __user *data,
+ size_t count, loff_t *ppos)
+{
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n");
+ return -ENODEV;
+}
+
+/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count--;
+}
+
+static struct vm_operations_struct uvc_vm_ops = {
+ .open = uvc_vm_open,
+ .close = uvc_vm_close,
+};
+
+static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+ struct uvc_buffer *buffer;
+ struct page *page;
+ unsigned long addr, start, size;
+ unsigned int i;
+ int ret = 0;
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
+
+ start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+
+ mutex_lock(&video->queue.mutex);
+
+ for (i = 0; i < video->queue.count; ++i) {
+ buffer = &video->queue.buffer[i];
+ if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+
+ if (i == video->queue.count || size != video->queue.buf_size) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * VM_IO marks the area as being an mmaped region for I/O to a
+ * device. It also prevents the region from being core dumped.
+ */
+ vma->vm_flags |= VM_IO;
+
+ addr = (unsigned long)video->queue.mem + buffer->buf.m.offset;
+ while (size > 0) {
+ page = vmalloc_to_page((void *)addr);
+ if ((ret = vm_insert_page(vma, start, page)) < 0)
+ goto done;
+
+ start += PAGE_SIZE;
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &uvc_vm_ops;
+ vma->vm_private_data = buffer;
+ uvc_vm_open(vma);
+
+done:
+ mutex_unlock(&video->queue.mutex);
+ return ret;
+}
+
+static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_video_device *video = video_get_drvdata(vdev);
+
+ uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n");
+
+ return uvc_queue_poll(&video->queue, file, wait);
+}
+
+struct file_operations uvc_fops = {
+ .owner = THIS_MODULE,
+ .open = uvc_v4l2_open,
+ .release = uvc_v4l2_release,
+ .ioctl = uvc_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek,
+ .read = uvc_v4l2_read,
+ .mmap = uvc_v4l2_mmap,
+ .poll = uvc_v4l2_poll,
+};
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
new file mode 100644
index 00000000000..6faf1fb2161
--- /dev/null
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -0,0 +1,934 @@
+/*
+ * uvc_video.c -- USB Video Class driver - Video handling
+ *
+ * Copyright (C) 2005-2008
+ * Laurent Pinchart (laurent.pinchart@skynet.be)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+#include <asm/unaligned.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * UVC Controls
+ */
+
+static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size,
+ int timeout)
+{
+ __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ unsigned int pipe;
+ int ret;
+
+ pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0)
+ : usb_sndctrlpipe(dev->udev, 0);
+ type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT;
+
+ ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8,
+ unit << 8 | intfnum, data, size, timeout);
+
+ if (ret != size) {
+ uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u "
+ "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret,
+ size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size)
+{
+ return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
+ UVC_CTRL_CONTROL_TIMEOUT);
+}
+
+static void uvc_fixup_buffer_size(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl)
+{
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+
+ if (ctrl->bFormatIndex <= 0 ||
+ ctrl->bFormatIndex > video->streaming->nformats)
+ return;
+
+ format = &video->streaming->format[ctrl->bFormatIndex - 1];
+
+ if (ctrl->bFrameIndex <= 0 ||
+ ctrl->bFrameIndex > format->nframes)
+ return;
+
+ frame = &format->frame[ctrl->bFrameIndex - 1];
+
+ if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) ||
+ (ctrl->dwMaxVideoFrameSize == 0 &&
+ video->dev->uvc_version < 0x0110))
+ ctrl->dwMaxVideoFrameSize =
+ frame->dwMaxVideoFrameBufferSize;
+}
+
+static int uvc_get_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe, __u8 query)
+{
+ __u8 data[34];
+ __u8 size;
+ int ret;
+
+ size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+ ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum,
+ probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+ UVC_CTRL_STREAMING_TIMEOUT);
+
+ if (ret < 0)
+ return ret;
+
+ ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
+ ctrl->bFormatIndex = data[2];
+ ctrl->bFrameIndex = data[3];
+ ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]);
+ ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]);
+ ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]);
+ ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]);
+ ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]);
+ ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]);
+ ctrl->dwMaxVideoFrameSize =
+ le32_to_cpu(get_unaligned((__le32 *)&data[18]));
+ ctrl->dwMaxPayloadTransferSize =
+ le32_to_cpu(get_unaligned((__le32 *)&data[22]));
+
+ if (size == 34) {
+ ctrl->dwClockFrequency =
+ le32_to_cpu(get_unaligned((__le32 *)&data[26]));
+ ctrl->bmFramingInfo = data[30];
+ ctrl->bPreferedVersion = data[31];
+ ctrl->bMinVersion = data[32];
+ ctrl->bMaxVersion = data[33];
+ } else {
+ ctrl->dwClockFrequency = video->dev->clock_frequency;
+ ctrl->bmFramingInfo = 0;
+ ctrl->bPreferedVersion = 0;
+ ctrl->bMinVersion = 0;
+ ctrl->bMaxVersion = 0;
+ }
+
+ /* Some broken devices return a null or wrong dwMaxVideoFrameSize.
+ * Try to get the value from the format and frame descriptor.
+ */
+ uvc_fixup_buffer_size(video, ctrl);
+
+ return 0;
+}
+
+int uvc_set_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe)
+{
+ __u8 data[34];
+ __u8 size;
+
+ size = video->dev->uvc_version >= 0x0110 ? 34 : 26;
+ memset(data, 0, sizeof data);
+
+ *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
+ data[2] = ctrl->bFormatIndex;
+ data[3] = ctrl->bFrameIndex;
+ *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval);
+ *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate);
+ *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate);
+ *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
+ *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
+ *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
+ /* Note: Some of the fields below are not required for IN devices (see
+ * UVC spec, 4.3.1.1), but we still copy them in case support for OUT
+ * devices is added in the future. */
+ put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize),
+ (__le32 *)&data[18]);
+ put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize),
+ (__le32 *)&data[22]);
+
+ if (size == 34) {
+ put_unaligned(cpu_to_le32(ctrl->dwClockFrequency),
+ (__le32 *)&data[26]);
+ data[30] = ctrl->bmFramingInfo;
+ data[31] = ctrl->bPreferedVersion;
+ data[32] = ctrl->bMinVersion;
+ data[33] = ctrl->bMaxVersion;
+ }
+
+ return __uvc_query_ctrl(video->dev, SET_CUR, 0,
+ video->streaming->intfnum,
+ probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size,
+ UVC_CTRL_STREAMING_TIMEOUT);
+}
+
+int uvc_probe_video(struct uvc_video_device *video,
+ struct uvc_streaming_control *probe)
+{
+ struct uvc_streaming_control probe_min, probe_max;
+ __u16 bandwidth;
+ unsigned int i;
+ int ret;
+
+ mutex_lock(&video->streaming->mutex);
+
+ /* Perform probing. The device should adjust the requested values
+ * according to its capabilities. However, some devices, namely the
+ * first generation UVC Logitech webcams, don't implement the Video
+ * Probe control properly, and just return the needed bandwidth. For
+ * that reason, if the needed bandwidth exceeds the maximum available
+ * bandwidth, try to lower the quality.
+ */
+ if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0)
+ goto done;
+
+ /* Get the minimum and maximum values for compression settings. */
+ if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) {
+ ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN);
+ if (ret < 0)
+ goto done;
+ ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX);
+ if (ret < 0)
+ goto done;
+
+ probe->wCompQuality = probe_max.wCompQuality;
+ }
+
+ for (i = 0; i < 2; ++i) {
+ if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 ||
+ (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0)
+ goto done;
+
+ if (video->streaming->intf->num_altsetting == 1)
+ break;
+
+ bandwidth = probe->dwMaxPayloadTransferSize;
+ if (bandwidth <= video->streaming->maxpsize)
+ break;
+
+ if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) {
+ ret = -ENOSPC;
+ goto done;
+ }
+
+ /* TODO: negotiate compression parameters */
+ probe->wKeyFrameRate = probe_min.wKeyFrameRate;
+ probe->wPFrameRate = probe_min.wPFrameRate;
+ probe->wCompQuality = probe_max.wCompQuality;
+ probe->wCompWindowSize = probe_min.wCompWindowSize;
+ }
+
+done:
+ mutex_unlock(&video->streaming->mutex);
+ return ret;
+}
+
+/* ------------------------------------------------------------------------
+ * Video codecs
+ */
+
+/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
+#define UVC_STREAM_EOH (1 << 7)
+#define UVC_STREAM_ERR (1 << 6)
+#define UVC_STREAM_STI (1 << 5)
+#define UVC_STREAM_RES (1 << 4)
+#define UVC_STREAM_SCR (1 << 3)
+#define UVC_STREAM_PTS (1 << 2)
+#define UVC_STREAM_EOF (1 << 1)
+#define UVC_STREAM_FID (1 << 0)
+
+/* Video payload decoding is handled by uvc_video_decode_start(),
+ * uvc_video_decode_data() and uvc_video_decode_end().
+ *
+ * uvc_video_decode_start is called with URB data at the start of a bulk or
+ * isochronous payload. It processes header data and returns the header size
+ * in bytes if successful. If an error occurs, it returns a negative error
+ * code. The following error codes have special meanings.
+ *
+ * - EAGAIN informs the caller that the current video buffer should be marked
+ * as done, and that the function should be called again with the same data
+ * and a new video buffer. This is used when end of frame conditions can be
+ * reliably detected at the beginning of the next frame only.
+ *
+ * If an error other than -EAGAIN is returned, the caller will drop the current
+ * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be
+ * made until the next payload. -ENODATA can be used to drop the current
+ * payload if no other error code is appropriate.
+ *
+ * uvc_video_decode_data is called for every URB with URB data. It copies the
+ * data to the video buffer.
+ *
+ * uvc_video_decode_end is called with header data at the end of a bulk or
+ * isochronous payload. It performs any additional header data processing and
+ * returns 0 or a negative error code if an error occured. As header data have
+ * already been processed by uvc_video_decode_start, this functions isn't
+ * required to perform sanity checks a second time.
+ *
+ * For isochronous transfers where a payload is always transfered in a single
+ * URB, the three functions will be called in a row.
+ *
+ * To let the decoder process header data and update its internal state even
+ * when no video buffer is available, uvc_video_decode_start must be prepared
+ * to be called with a NULL buf parameter. uvc_video_decode_data and
+ * uvc_video_decode_end will never be called with a NULL buffer.
+ */
+static int uvc_video_decode_start(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ __u8 fid;
+
+ /* Sanity checks:
+ * - packet must be at least 2 bytes long
+ * - bHeaderLength value must be at least 2 bytes (see above)
+ * - bHeaderLength value can't be larger than the packet size.
+ */
+ if (len < 2 || data[0] < 2 || data[0] > len)
+ return -EINVAL;
+
+ /* Skip payloads marked with the error bit ("error frames"). */
+ if (data[1] & UVC_STREAM_ERR) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit "
+ "set).\n");
+ return -ENODATA;
+ }
+
+ fid = data[1] & UVC_STREAM_FID;
+
+ /* Store the payload FID bit and return immediately when the buffer is
+ * NULL.
+ */
+ if (buf == NULL) {
+ video->last_fid = fid;
+ return -ENODATA;
+ }
+
+ /* Synchronize to the input stream by waiting for the FID bit to be
+ * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * queue->last_fid is initialized to -1, so the first isochronous
+ * frame will always be in sync.
+ *
+ * If the device doesn't toggle the FID bit, invert video->last_fid
+ * when the EOF bit is set to force synchronisation on the next packet.
+ */
+ if (buf->state != UVC_BUF_STATE_ACTIVE) {
+ if (fid == video->last_fid) {
+ uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of "
+ "sync).\n");
+ if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) &&
+ (data[1] & UVC_STREAM_EOF))
+ video->last_fid ^= UVC_STREAM_FID;
+ return -ENODATA;
+ }
+
+ /* TODO: Handle PTS and SCR. */
+ buf->state = UVC_BUF_STATE_ACTIVE;
+ }
+
+ /* Mark the buffer as done if we're at the beginning of a new frame.
+ * End of frame detection is better implemented by checking the EOF
+ * bit (FID bit toggling is delayed by one frame compared to the EOF
+ * bit), but some devices don't set the bit at end of frame (and the
+ * last payload can be lost anyway). We thus must check if the FID has
+ * been toggled.
+ *
+ * queue->last_fid is initialized to -1, so the first isochronous
+ * frame will never trigger an end of frame detection.
+ *
+ * Empty buffers (bytesused == 0) don't trigger end of frame detection
+ * as it doesn't make sense to return an empty buffer. This also
+ * avoids detecting and of frame conditions at FID toggling if the
+ * previous payload had the EOF bit set.
+ */
+ if (fid != video->last_fid && buf->buf.bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
+ "toggled).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ return -EAGAIN;
+ }
+
+ video->last_fid = fid;
+
+ return data[0];
+}
+
+static void uvc_video_decode_data(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ struct uvc_video_queue *queue = &video->queue;
+ unsigned int maxlen, nbytes;
+ void *mem;
+
+ if (len <= 0)
+ return;
+
+ /* Copy the video data to the buffer. */
+ maxlen = buf->buf.length - buf->buf.bytesused;
+ mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused;
+ nbytes = min((unsigned int)len, maxlen);
+ memcpy(mem, data, nbytes);
+ buf->buf.bytesused += nbytes;
+
+ /* Complete the current frame if the buffer size was exceeded. */
+ if (len > maxlen) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ }
+}
+
+static void uvc_video_decode_end(struct uvc_video_device *video,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+{
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+ if (data[0] == len)
+ uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
+ buf->state = UVC_BUF_STATE_DONE;
+ if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
+ video->last_fid ^= UVC_STREAM_FID;
+ }
+}
+
+/* ------------------------------------------------------------------------
+ * URB handling
+ */
+
+/*
+ * Completion handler for video URBs.
+ */
+static void uvc_video_decode_isoc(struct urb *urb,
+ struct uvc_video_device *video, struct uvc_buffer *buf)
+{
+ u8 *mem;
+ int ret, i;
+
+ for (i = 0; i < urb->number_of_packets; ++i) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
+ "lost (%d).\n", urb->iso_frame_desc[i].status);
+ continue;
+ }
+
+ /* Decode the payload header. */
+ mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ do {
+ ret = uvc_video_decode_start(video, buf, mem,
+ urb->iso_frame_desc[i].actual_length);
+ if (ret == -EAGAIN)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+
+ if (ret < 0)
+ continue;
+
+ /* Decode the payload data. */
+ uvc_video_decode_data(video, buf, mem + ret,
+ urb->iso_frame_desc[i].actual_length - ret);
+
+ /* Process the header again. */
+ uvc_video_decode_end(video, buf, mem, ret);
+
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ }
+}
+
+static void uvc_video_decode_bulk(struct urb *urb,
+ struct uvc_video_device *video, struct uvc_buffer *buf)
+{
+ u8 *mem;
+ int len, ret;
+
+ mem = urb->transfer_buffer;
+ len = urb->actual_length;
+ video->bulk.payload_size += len;
+
+ /* If the URB is the first of its payload, decode and save the
+ * header.
+ */
+ if (video->bulk.header_size == 0) {
+ do {
+ ret = uvc_video_decode_start(video, buf, mem, len);
+ if (ret == -EAGAIN)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ } while (ret == -EAGAIN);
+
+ /* If an error occured skip the rest of the payload. */
+ if (ret < 0 || buf == NULL) {
+ video->bulk.skip_payload = 1;
+ return;
+ }
+
+ video->bulk.header_size = ret;
+ memcpy(video->bulk.header, mem, video->bulk.header_size);
+
+ mem += ret;
+ len -= ret;
+ }
+
+ /* The buffer queue might have been cancelled while a bulk transfer
+ * was in progress, so we can reach here with buf equal to NULL. Make
+ * sure buf is never dereferenced if NULL.
+ */
+
+ /* Process video data. */
+ if (!video->bulk.skip_payload && buf != NULL)
+ uvc_video_decode_data(video, buf, mem, len);
+
+ /* Detect the payload end by a URB smaller than the maximum size (or
+ * a payload size equal to the maximum) and process the header again.
+ */
+ if (urb->actual_length < urb->transfer_buffer_length ||
+ video->bulk.payload_size >= video->bulk.max_payload_size) {
+ if (!video->bulk.skip_payload && buf != NULL) {
+ uvc_video_decode_end(video, buf, video->bulk.header,
+ video->bulk.header_size);
+ if (buf->state == UVC_BUF_STATE_DONE ||
+ buf->state == UVC_BUF_STATE_ERROR)
+ buf = uvc_queue_next_buffer(&video->queue, buf);
+ }
+
+ video->bulk.header_size = 0;
+ video->bulk.skip_payload = 0;
+ video->bulk.payload_size = 0;
+ }
+}
+
+static void uvc_video_complete(struct urb *urb)
+{
+ struct uvc_video_device *video = urb->context;
+ struct uvc_video_queue *queue = &video->queue;
+ struct uvc_buffer *buf = NULL;
+ unsigned long flags;
+ int ret;
+
+ switch (urb->status) {
+ case 0:
+ break;
+
+ default:
+ uvc_printk(KERN_WARNING, "Non-zero status (%d) in video "
+ "completion handler.\n", urb->status);
+
+ case -ENOENT: /* usb_kill_urb() called. */
+ if (video->frozen)
+ return;
+
+ case -ECONNRESET: /* usb_unlink_urb() called. */
+ case -ESHUTDOWN: /* The endpoint is being disabled. */
+ uvc_queue_cancel(queue, urb->status == -ESHUTDOWN);
+ return;
+ }
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ if (!list_empty(&queue->irqqueue))
+ buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
+ video->decode(urb, video, buf);
+
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n",
+ ret);
+ }
+}
+
+/*
+ * Uninitialize isochronous/bulk URBs and free transfer buffers.
+ */
+static void uvc_uninit_video(struct uvc_video_device *video)
+{
+ struct urb *urb;
+ unsigned int i;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ if ((urb = video->urb[i]) == NULL)
+ continue;
+
+ usb_kill_urb(urb);
+ /* urb->transfer_buffer_length is not touched by USB core, so
+ * we can use it here as the buffer length.
+ */
+ if (video->urb_buffer[i]) {
+ usb_buffer_free(video->dev->udev,
+ urb->transfer_buffer_length,
+ video->urb_buffer[i], urb->transfer_dma);
+ video->urb_buffer[i] = NULL;
+ }
+
+ usb_free_urb(urb);
+ video->urb[i] = NULL;
+ }
+}
+
+/*
+ * Initialize isochronous URBs and allocate transfer buffers. The packet size
+ * is given by the endpoint.
+ */
+static int uvc_init_video_isoc(struct uvc_video_device *video,
+ struct usb_host_endpoint *ep)
+{
+ struct urb *urb;
+ unsigned int npackets, i, j;
+ __u16 psize;
+ __u32 size;
+
+ /* Compute the number of isochronous packets to allocate by dividing
+ * the maximum video frame size by the packet size. Limit the result
+ * to UVC_MAX_ISO_PACKETS.
+ */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+
+ size = video->streaming->ctrl.dwMaxVideoFrameSize;
+ if (size > UVC_MAX_FRAME_SIZE)
+ return -EINVAL;
+
+ npackets = (size + psize - 1) / psize;
+ if (npackets > UVC_MAX_ISO_PACKETS)
+ npackets = UVC_MAX_ISO_PACKETS;
+
+ size = npackets * psize;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ urb = usb_alloc_urb(npackets, GFP_KERNEL);
+ if (urb == NULL) {
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev,
+ size, GFP_KERNEL, &urb->transfer_dma);
+ if (video->urb_buffer[i] == NULL) {
+ usb_free_urb(urb);
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ urb->dev = video->dev->udev;
+ urb->context = video;
+ urb->pipe = usb_rcvisocpipe(video->dev->udev,
+ ep->desc.bEndpointAddress);
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->interval = ep->desc.bInterval;
+ urb->transfer_buffer = video->urb_buffer[i];
+ urb->complete = uvc_video_complete;
+ urb->number_of_packets = npackets;
+ urb->transfer_buffer_length = size;
+
+ for (j = 0; j < npackets; ++j) {
+ urb->iso_frame_desc[j].offset = j * psize;
+ urb->iso_frame_desc[j].length = psize;
+ }
+
+ video->urb[i] = urb;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize bulk URBs and allocate transfer buffers. The packet size is
+ * given by the endpoint.
+ */
+static int uvc_init_video_bulk(struct uvc_video_device *video,
+ struct usb_host_endpoint *ep)
+{
+ struct urb *urb;
+ unsigned int pipe, i;
+ __u16 psize;
+ __u32 size;
+
+ /* Compute the bulk URB size. Some devices set the maximum payload
+ * size to a value too high for memory-constrained devices. We must
+ * then transfer the payload accross multiple URBs. To be consistant
+ * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk
+ * URB.
+ */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff;
+ size = video->streaming->ctrl.dwMaxPayloadTransferSize;
+ video->bulk.max_payload_size = size;
+ if (size > psize * UVC_MAX_ISO_PACKETS)
+ size = psize * UVC_MAX_ISO_PACKETS;
+
+ pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress);
+
+ for (i = 0; i < UVC_URBS; ++i) {
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (urb == NULL) {
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev,
+ size, GFP_KERNEL, &urb->transfer_dma);
+ if (video->urb_buffer[i] == NULL) {
+ usb_free_urb(urb);
+ uvc_uninit_video(video);
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(urb, video->dev->udev, pipe,
+ video->urb_buffer[i], size, uvc_video_complete,
+ video);
+ urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+
+ video->urb[i] = urb;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize isochronous/bulk URBs and allocate transfer buffers.
+ */
+static int uvc_init_video(struct uvc_video_device *video)
+{
+ struct usb_interface *intf = video->streaming->intf;
+ struct usb_host_interface *alts;
+ struct usb_host_endpoint *ep = NULL;
+ int intfnum = video->streaming->intfnum;
+ unsigned int bandwidth, psize, i;
+ int ret;
+
+ video->last_fid = -1;
+ video->bulk.header_size = 0;
+ video->bulk.skip_payload = 0;
+ video->bulk.payload_size = 0;
+
+ if (intf->num_altsetting > 1) {
+ /* Isochronous endpoint, select the alternate setting. */
+ bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize;
+
+ if (bandwidth == 0) {
+ uvc_printk(KERN_WARNING, "device %s requested null "
+ "bandwidth, defaulting to lowest.\n",
+ video->vdev->name);
+ bandwidth = 1;
+ }
+
+ for (i = 0; i < intf->num_altsetting; ++i) {
+ alts = &intf->altsetting[i];
+ ep = uvc_find_endpoint(alts,
+ video->streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ continue;
+
+ /* Check if the bandwidth is high enough. */
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
+ if (psize >= bandwidth)
+ break;
+ }
+
+ if (i >= intf->num_altsetting)
+ return -EIO;
+
+ if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0)
+ return ret;
+
+ ret = uvc_init_video_isoc(video, ep);
+ } else {
+ /* Bulk endpoint, proceed to URB initialization. */
+ ep = uvc_find_endpoint(&intf->altsetting[0],
+ video->streaming->header.bEndpointAddress);
+ if (ep == NULL)
+ return -EIO;
+
+ ret = uvc_init_video_bulk(video, ep);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Submit the URBs. */
+ for (i = 0; i < UVC_URBS; ++i) {
+ if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) {
+ uvc_printk(KERN_ERR, "Failed to submit URB %u "
+ "(%d).\n", i, ret);
+ uvc_uninit_video(video);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+/*
+ * Stop streaming without disabling the video queue.
+ *
+ * To let userspace applications resume without trouble, we must not touch the
+ * video buffers in any way. We mark the device as frozen to make sure the URB
+ * completion handler won't try to cancel the queue when we kill the URBs.
+ */
+int uvc_video_suspend(struct uvc_video_device *video)
+{
+ if (!uvc_queue_streaming(&video->queue))
+ return 0;
+
+ video->frozen = 1;
+ uvc_uninit_video(video);
+ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
+ return 0;
+}
+
+/*
+ * Reconfigure the video interface and restart streaming if it was enable
+ * before suspend.
+ *
+ * If an error occurs, disable the video queue. This will wake all pending
+ * buffers, making sure userspace applications are notified of the problem
+ * instead of waiting forever.
+ */
+int uvc_video_resume(struct uvc_video_device *video)
+{
+ int ret;
+
+ video->frozen = 0;
+
+ if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) {
+ uvc_queue_enable(&video->queue, 0);
+ return ret;
+ }
+
+ if (!uvc_queue_streaming(&video->queue))
+ return 0;
+
+ if ((ret = uvc_init_video(video)) < 0)
+ uvc_queue_enable(&video->queue, 0);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------
+ * Video device
+ */
+
+/*
+ * Initialize the UVC video device by retrieving the default format and
+ * committing it.
+ *
+ * Some cameras (namely the Fuji Finepix) set the format and frame
+ * indexes to zero. The UVC standard doesn't clearly make this a spec
+ * violation, so try to silently fix the values if possible.
+ *
+ * This function is called before registering the device with V4L.
+ */
+int uvc_video_init(struct uvc_video_device *video)
+{
+ struct uvc_streaming_control *probe = &video->streaming->ctrl;
+ struct uvc_format *format = NULL;
+ struct uvc_frame *frame = NULL;
+ unsigned int i;
+ int ret;
+
+ if (video->streaming->nformats == 0) {
+ uvc_printk(KERN_INFO, "No supported video formats found.\n");
+ return -EINVAL;
+ }
+
+ /* Alternate setting 0 should be the default, yet the XBox Live Vision
+ * Cam (and possibly other devices) crash or otherwise misbehave if
+ * they don't receive a SET_INTERFACE request before any other video
+ * control request.
+ */
+ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
+
+ /* Some webcams don't suport GET_DEF request on the probe control. We
+ * fall back to GET_CUR if GET_DEF fails.
+ */
+ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 &&
+ (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0)
+ return ret;
+
+ /* Check if the default format descriptor exists. Use the first
+ * available format otherwise.
+ */
+ for (i = video->streaming->nformats; i > 0; --i) {
+ format = &video->streaming->format[i-1];
+ if (format->index == probe->bFormatIndex)
+ break;
+ }
+
+ if (format->nframes == 0) {
+ uvc_printk(KERN_INFO, "No frame descriptor found for the "
+ "default format.\n");
+ return -EINVAL;
+ }
+
+ /* Zero bFrameIndex might be correct. Stream-based formats (including
+ * MPEG-2 TS and DV) do not support frames but have a dummy frame
+ * descriptor with bFrameIndex set to zero. If the default frame
+ * descriptor is not found, use the first avalable frame.
+ */
+ for (i = format->nframes; i > 0; --i) {
+ frame = &format->frame[i-1];
+ if (frame->bFrameIndex == probe->bFrameIndex)
+ break;
+ }
+
+ /* Commit the default settings. */
+ probe->bFormatIndex = format->index;
+ probe->bFrameIndex = frame->bFrameIndex;
+ if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0)
+ return ret;
+
+ video->streaming->cur_format = format;
+ video->streaming->cur_frame = frame;
+ atomic_set(&video->active, 0);
+
+ /* Select the video decoding function */
+ if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT)
+ video->decode = uvc_video_decode_isight;
+ else if (video->streaming->intf->num_altsetting > 1)
+ video->decode = uvc_video_decode_isoc;
+ else
+ video->decode = uvc_video_decode_bulk;
+
+ return 0;
+}
+
+/*
+ * Enable or disable the video stream.
+ */
+int uvc_video_enable(struct uvc_video_device *video, int enable)
+{
+ int ret;
+
+ if (!enable) {
+ uvc_uninit_video(video);
+ usb_set_interface(video->dev->udev,
+ video->streaming->intfnum, 0);
+ uvc_queue_enable(&video->queue, 0);
+ return 0;
+ }
+
+ if ((ret = uvc_queue_enable(&video->queue, 1)) < 0)
+ return ret;
+
+ return uvc_init_video(video);
+}
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
new file mode 100644
index 00000000000..a995a780db1
--- /dev/null
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -0,0 +1,796 @@
+#ifndef _USB_VIDEO_H_
+#define _USB_VIDEO_H_
+
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+
+
+/*
+ * Dynamic controls
+ */
+
+/* Data types for UVC control data */
+#define UVC_CTRL_DATA_TYPE_RAW 0
+#define UVC_CTRL_DATA_TYPE_SIGNED 1
+#define UVC_CTRL_DATA_TYPE_UNSIGNED 2
+#define UVC_CTRL_DATA_TYPE_BOOLEAN 3
+#define UVC_CTRL_DATA_TYPE_ENUM 4
+#define UVC_CTRL_DATA_TYPE_BITMASK 5
+
+/* Control flags */
+#define UVC_CONTROL_SET_CUR (1 << 0)
+#define UVC_CONTROL_GET_CUR (1 << 1)
+#define UVC_CONTROL_GET_MIN (1 << 2)
+#define UVC_CONTROL_GET_MAX (1 << 3)
+#define UVC_CONTROL_GET_RES (1 << 4)
+#define UVC_CONTROL_GET_DEF (1 << 5)
+/* Control should be saved at suspend and restored at resume. */
+#define UVC_CONTROL_RESTORE (1 << 6)
+/* Control can be updated by the camera. */
+#define UVC_CONTROL_AUTO_UPDATE (1 << 7)
+
+#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \
+ UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \
+ UVC_CONTROL_GET_DEF)
+
+struct uvc_xu_control_info {
+ __u8 entity[16];
+ __u8 index;
+ __u8 selector;
+ __u16 size;
+ __u32 flags;
+};
+
+struct uvc_xu_control_mapping {
+ __u32 id;
+ __u8 name[32];
+ __u8 entity[16];
+ __u8 selector;
+
+ __u8 size;
+ __u8 offset;
+ enum v4l2_ctrl_type v4l2_type;
+ __u32 data_type;
+};
+
+struct uvc_xu_control {
+ __u8 unit;
+ __u8 selector;
+ __u16 size;
+ __u8 __user *data;
+};
+
+#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info)
+#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping)
+#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control)
+#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control)
+
+#ifdef __KERNEL__
+
+#include <linux/poll.h>
+
+/* --------------------------------------------------------------------------
+ * UVC constants
+ */
+
+#define SC_UNDEFINED 0x00
+#define SC_VIDEOCONTROL 0x01
+#define SC_VIDEOSTREAMING 0x02
+#define SC_VIDEO_INTERFACE_COLLECTION 0x03
+
+#define PC_PROTOCOL_UNDEFINED 0x00
+
+#define CS_UNDEFINED 0x20
+#define CS_DEVICE 0x21
+#define CS_CONFIGURATION 0x22
+#define CS_STRING 0x23
+#define CS_INTERFACE 0x24
+#define CS_ENDPOINT 0x25
+
+/* VideoControl class specific interface descriptor */
+#define VC_DESCRIPTOR_UNDEFINED 0x00
+#define VC_HEADER 0x01
+#define VC_INPUT_TERMINAL 0x02
+#define VC_OUTPUT_TERMINAL 0x03
+#define VC_SELECTOR_UNIT 0x04
+#define VC_PROCESSING_UNIT 0x05
+#define VC_EXTENSION_UNIT 0x06
+
+/* VideoStreaming class specific interface descriptor */
+#define VS_UNDEFINED 0x00
+#define VS_INPUT_HEADER 0x01
+#define VS_OUTPUT_HEADER 0x02
+#define VS_STILL_IMAGE_FRAME 0x03
+#define VS_FORMAT_UNCOMPRESSED 0x04
+#define VS_FRAME_UNCOMPRESSED 0x05
+#define VS_FORMAT_MJPEG 0x06
+#define VS_FRAME_MJPEG 0x07
+#define VS_FORMAT_MPEG2TS 0x0a
+#define VS_FORMAT_DV 0x0c
+#define VS_COLORFORMAT 0x0d
+#define VS_FORMAT_FRAME_BASED 0x10
+#define VS_FRAME_FRAME_BASED 0x11
+#define VS_FORMAT_STREAM_BASED 0x12
+
+/* Endpoint type */
+#define EP_UNDEFINED 0x00
+#define EP_GENERAL 0x01
+#define EP_ENDPOINT 0x02
+#define EP_INTERRUPT 0x03
+
+/* Request codes */
+#define RC_UNDEFINED 0x00
+#define SET_CUR 0x01
+#define GET_CUR 0x81
+#define GET_MIN 0x82
+#define GET_MAX 0x83
+#define GET_RES 0x84
+#define GET_LEN 0x85
+#define GET_INFO 0x86
+#define GET_DEF 0x87
+
+/* VideoControl interface controls */
+#define VC_CONTROL_UNDEFINED 0x00
+#define VC_VIDEO_POWER_MODE_CONTROL 0x01
+#define VC_REQUEST_ERROR_CODE_CONTROL 0x02
+
+/* Terminal controls */
+#define TE_CONTROL_UNDEFINED 0x00
+
+/* Selector Unit controls */
+#define SU_CONTROL_UNDEFINED 0x00
+#define SU_INPUT_SELECT_CONTROL 0x01
+
+/* Camera Terminal controls */
+#define CT_CONTROL_UNDEFINED 0x00
+#define CT_SCANNING_MODE_CONTROL 0x01
+#define CT_AE_MODE_CONTROL 0x02
+#define CT_AE_PRIORITY_CONTROL 0x03
+#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04
+#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05
+#define CT_FOCUS_ABSOLUTE_CONTROL 0x06
+#define CT_FOCUS_RELATIVE_CONTROL 0x07
+#define CT_FOCUS_AUTO_CONTROL 0x08
+#define CT_IRIS_ABSOLUTE_CONTROL 0x09
+#define CT_IRIS_RELATIVE_CONTROL 0x0a
+#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b
+#define CT_ZOOM_RELATIVE_CONTROL 0x0c
+#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d
+#define CT_PANTILT_RELATIVE_CONTROL 0x0e
+#define CT_ROLL_ABSOLUTE_CONTROL 0x0f
+#define CT_ROLL_RELATIVE_CONTROL 0x10
+#define CT_PRIVACY_CONTROL 0x11
+
+/* Processing Unit controls */
+#define PU_CONTROL_UNDEFINED 0x00
+#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01
+#define PU_BRIGHTNESS_CONTROL 0x02
+#define PU_CONTRAST_CONTROL 0x03
+#define PU_GAIN_CONTROL 0x04
+#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05
+#define PU_HUE_CONTROL 0x06
+#define PU_SATURATION_CONTROL 0x07
+#define PU_SHARPNESS_CONTROL 0x08
+#define PU_GAMMA_CONTROL 0x09
+#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a
+#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b
+#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c
+#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d
+#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e
+#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f
+#define PU_HUE_AUTO_CONTROL 0x10
+#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11
+#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12
+
+#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01
+#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02
+#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03
+
+/* VideoStreaming interface controls */
+#define VS_CONTROL_UNDEFINED 0x00
+#define VS_PROBE_CONTROL 0x01
+#define VS_COMMIT_CONTROL 0x02
+#define VS_STILL_PROBE_CONTROL 0x03
+#define VS_STILL_COMMIT_CONTROL 0x04
+#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05
+#define VS_STREAM_ERROR_CODE_CONTROL 0x06
+#define VS_GENERATE_KEY_FRAME_CONTROL 0x07
+#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
+#define VS_SYNC_DELAY_CONTROL 0x09
+
+#define TT_VENDOR_SPECIFIC 0x0100
+#define TT_STREAMING 0x0101
+
+/* Input Terminal types */
+#define ITT_VENDOR_SPECIFIC 0x0200
+#define ITT_CAMERA 0x0201
+#define ITT_MEDIA_TRANSPORT_INPUT 0x0202
+
+/* Output Terminal types */
+#define OTT_VENDOR_SPECIFIC 0x0300
+#define OTT_DISPLAY 0x0301
+#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302
+
+/* External Terminal types */
+#define EXTERNAL_VENDOR_SPECIFIC 0x0400
+#define COMPOSITE_CONNECTOR 0x0401
+#define SVIDEO_CONNECTOR 0x0402
+#define COMPONENT_CONNECTOR 0x0403
+
+#define UVC_TERM_INPUT 0x0000
+#define UVC_TERM_OUTPUT 0x8000
+
+#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff)
+#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0)
+#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0)
+#define UVC_ENTITY_IS_ITERM(entity) \
+ (((entity)->type & 0x8000) == UVC_TERM_INPUT)
+#define UVC_ENTITY_IS_OTERM(entity) \
+ (((entity)->type & 0x8000) == UVC_TERM_OUTPUT)
+
+#define UVC_STATUS_TYPE_CONTROL 1
+#define UVC_STATUS_TYPE_STREAMING 2
+
+/* ------------------------------------------------------------------------
+ * GUIDs
+ */
+#define UVC_GUID_UVC_CAMERA \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}
+#define UVC_GUID_UVC_OUTPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02}
+#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+#define UVC_GUID_UVC_PROCESSING \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01}
+#define UVC_GUID_UVC_SELECTOR \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02}
+
+#define UVC_GUID_LOGITECH_DEV_INFO \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e}
+#define UVC_GUID_LOGITECH_USER_HW \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f}
+#define UVC_GUID_LOGITECH_VIDEO \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50}
+#define UVC_GUID_LOGITECH_MOTOR \
+ {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \
+ 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56}
+
+#define UVC_GUID_FORMAT_MJPEG \
+ { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YUY2 \
+ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_NV12 \
+ { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YV12 \
+ { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_I420 \
+ { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_UYVY \
+ { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y800 \
+ { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BY8 \
+ { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+
+/* ------------------------------------------------------------------------
+ * Driver specific constants.
+ */
+
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0)
+
+/* Number of isochronous URBs. */
+#define UVC_URBS 5
+/* Maximum number of packets per isochronous URB. */
+#define UVC_MAX_ISO_PACKETS 40
+/* Maximum frame size in bytes, for sanity checking. */
+#define UVC_MAX_FRAME_SIZE (16*1024*1024)
+/* Maximum number of video buffers. */
+#define UVC_MAX_VIDEO_BUFFERS 32
+
+#define UVC_CTRL_CONTROL_TIMEOUT 300
+#define UVC_CTRL_STREAMING_TIMEOUT 1000
+
+/* Devices quirks */
+#define UVC_QUIRK_STATUS_INTERVAL 0x00000001
+#define UVC_QUIRK_PROBE_MINMAX 0x00000002
+#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004
+#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008
+#define UVC_QUIRK_STREAM_NO_FID 0x00000010
+#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020
+
+/* Format flags */
+#define UVC_FMT_FLAG_COMPRESSED 0x00000001
+#define UVC_FMT_FLAG_STREAM 0x00000002
+
+/* ------------------------------------------------------------------------
+ * Structures.
+ */
+
+struct uvc_device;
+
+/* TODO: Put the most frequently accessed fields at the beginning of
+ * structures to maximize cache efficiency.
+ */
+struct uvc_streaming_control {
+ __u16 bmHint;
+ __u8 bFormatIndex;
+ __u8 bFrameIndex;
+ __u32 dwFrameInterval;
+ __u16 wKeyFrameRate;
+ __u16 wPFrameRate;
+ __u16 wCompQuality;
+ __u16 wCompWindowSize;
+ __u16 wDelay;
+ __u32 dwMaxVideoFrameSize;
+ __u32 dwMaxPayloadTransferSize;
+ __u32 dwClockFrequency;
+ __u8 bmFramingInfo;
+ __u8 bPreferedVersion;
+ __u8 bMinVersion;
+ __u8 bMaxVersion;
+};
+
+struct uvc_menu_info {
+ __u32 value;
+ __u8 name[32];
+};
+
+struct uvc_control_info {
+ struct list_head list;
+ struct list_head mappings;
+
+ __u8 entity[16];
+ __u8 index;
+ __u8 selector;
+
+ __u16 size;
+ __u32 flags;
+};
+
+struct uvc_control_mapping {
+ struct list_head list;
+
+ struct uvc_control_info *ctrl;
+
+ __u32 id;
+ __u8 name[32];
+ __u8 entity[16];
+ __u8 selector;
+
+ __u8 size;
+ __u8 offset;
+ enum v4l2_ctrl_type v4l2_type;
+ __u32 data_type;
+
+ struct uvc_menu_info *menu_info;
+ __u32 menu_count;
+};
+
+struct uvc_control {
+ struct uvc_entity *entity;
+ struct uvc_control_info *info;
+
+ __u8 index; /* Used to match the uvc_control entry with a
+ uvc_control_info. */
+ __u8 dirty : 1,
+ loaded : 1,
+ modified : 1;
+
+ __u8 *data;
+};
+
+struct uvc_format_desc {
+ char *name;
+ __u8 guid[16];
+ __u32 fcc;
+};
+
+/* The term 'entity' refers to both UVC units and UVC terminals.
+ *
+ * The type field is either the terminal type (wTerminalType in the terminal
+ * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor).
+ * As the bDescriptorSubtype field is one byte long, the type value will
+ * always have a null MSB for units. All terminal types defined by the UVC
+ * specification have a non-null MSB, so it is safe to use the MSB to
+ * differentiate between units and terminals as long as the descriptor parsing
+ * code makes sure terminal types have a non-null MSB.
+ *
+ * For terminals, the type's most significant bit stores the terminal
+ * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should
+ * always be accessed with the UVC_ENTITY_* macros and never directly.
+ */
+
+struct uvc_entity {
+ struct list_head list; /* Entity as part of a UVC device. */
+ struct list_head chain; /* Entity as part of a video device
+ * chain. */
+ __u8 id;
+ __u16 type;
+ char name[64];
+
+ union {
+ struct {
+ __u16 wObjectiveFocalLengthMin;
+ __u16 wObjectiveFocalLengthMax;
+ __u16 wOcularFocalLength;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ } camera;
+
+ struct {
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 bTransportModeSize;
+ __u8 *bmTransportModes;
+ } media;
+
+ struct {
+ __u8 bSourceID;
+ } output;
+
+ struct {
+ __u8 bSourceID;
+ __u16 wMaxMultiplier;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 bmVideoStandards;
+ } processing;
+
+ struct {
+ __u8 bNrInPins;
+ __u8 *baSourceID;
+ } selector;
+
+ struct {
+ __u8 guidExtensionCode[16];
+ __u8 bNumControls;
+ __u8 bNrInPins;
+ __u8 *baSourceID;
+ __u8 bControlSize;
+ __u8 *bmControls;
+ __u8 *bmControlsType;
+ } extension;
+ };
+
+ unsigned int ncontrols;
+ struct uvc_control *controls;
+};
+
+struct uvc_frame {
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u8 bFrameIntervalType;
+ __u32 dwDefaultFrameInterval;
+ __u32 *dwFrameInterval;
+};
+
+struct uvc_format {
+ __u8 type;
+ __u8 index;
+ __u8 bpp;
+ __u8 colorspace;
+ __u32 fcc;
+ __u32 flags;
+
+ char name[32];
+
+ unsigned int nframes;
+ struct uvc_frame *frame;
+};
+
+struct uvc_streaming_header {
+ __u8 bNumFormats;
+ __u8 bEndpointAddress;
+ __u8 bTerminalLink;
+ __u8 bControlSize;
+ __u8 *bmaControls;
+ /* The following fields are used by input headers only. */
+ __u8 bmInfo;
+ __u8 bStillCaptureMethod;
+ __u8 bTriggerSupport;
+ __u8 bTriggerUsage;
+};
+
+struct uvc_streaming {
+ struct list_head list;
+
+ struct usb_interface *intf;
+ int intfnum;
+ __u16 maxpsize;
+
+ struct uvc_streaming_header header;
+
+ unsigned int nformats;
+ struct uvc_format *format;
+
+ struct uvc_streaming_control ctrl;
+ struct uvc_format *cur_format;
+ struct uvc_frame *cur_frame;
+
+ struct mutex mutex;
+};
+
+enum uvc_buffer_state {
+ UVC_BUF_STATE_IDLE = 0,
+ UVC_BUF_STATE_QUEUED = 1,
+ UVC_BUF_STATE_ACTIVE = 2,
+ UVC_BUF_STATE_DONE = 3,
+ UVC_BUF_STATE_ERROR = 4,
+};
+
+struct uvc_buffer {
+ unsigned long vma_use_count;
+ struct list_head stream;
+
+ /* Touched by interrupt handler. */
+ struct v4l2_buffer buf;
+ struct list_head queue;
+ wait_queue_head_t wait;
+ enum uvc_buffer_state state;
+};
+
+#define UVC_QUEUE_STREAMING (1 << 0)
+#define UVC_QUEUE_DISCONNECTED (1 << 1)
+#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2)
+
+struct uvc_video_queue {
+ void *mem;
+ unsigned int flags;
+ __u32 sequence;
+
+ unsigned int count;
+ unsigned int buf_size;
+ struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS];
+ struct mutex mutex; /* protects buffers and mainqueue */
+ spinlock_t irqlock; /* protects irqqueue */
+
+ struct list_head mainqueue;
+ struct list_head irqqueue;
+};
+
+struct uvc_video_device {
+ struct uvc_device *dev;
+ struct video_device *vdev;
+ atomic_t active;
+ unsigned int frozen : 1;
+
+ struct list_head iterms;
+ struct uvc_entity *oterm;
+ struct uvc_entity *processing;
+ struct uvc_entity *selector;
+ struct list_head extensions;
+ struct mutex ctrl_mutex;
+
+ struct uvc_video_queue queue;
+
+ /* Video streaming object, must always be non-NULL. */
+ struct uvc_streaming *streaming;
+
+ void (*decode) (struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf);
+
+ /* Context data used by the bulk completion handler. */
+ struct {
+ __u8 header[256];
+ unsigned int header_size;
+ int skip_payload;
+ __u32 payload_size;
+ __u32 max_payload_size;
+ } bulk;
+
+ struct urb *urb[UVC_URBS];
+ char *urb_buffer[UVC_URBS];
+
+ __u8 last_fid;
+};
+
+enum uvc_device_state {
+ UVC_DEV_DISCONNECTED = 1,
+};
+
+struct uvc_device {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ __u32 quirks;
+ int intfnum;
+ char name[32];
+
+ enum uvc_device_state state;
+ struct kref kref;
+ struct list_head list;
+
+ /* Video control interface */
+ __u16 uvc_version;
+ __u32 clock_frequency;
+
+ struct list_head entities;
+
+ struct uvc_video_device video;
+
+ /* Status Interrupt Endpoint */
+ struct usb_host_endpoint *int_ep;
+ struct urb *int_urb;
+ __u8 status[16];
+ struct input_dev *input;
+
+ /* Video Streaming interfaces */
+ struct list_head streaming;
+};
+
+enum uvc_handle_state {
+ UVC_HANDLE_PASSIVE = 0,
+ UVC_HANDLE_ACTIVE = 1,
+};
+
+struct uvc_fh {
+ struct uvc_video_device *device;
+ enum uvc_handle_state state;
+};
+
+struct uvc_driver {
+ struct usb_driver driver;
+
+ struct mutex open_mutex; /* protects from open/disconnect race */
+
+ struct list_head devices; /* struct uvc_device list */
+ struct list_head controls; /* struct uvc_control_info list */
+ struct mutex ctrl_mutex; /* protects controls and devices
+ lists */
+};
+
+/* ------------------------------------------------------------------------
+ * Debugging, printing and logging
+ */
+
+#define UVC_TRACE_PROBE (1 << 0)
+#define UVC_TRACE_DESCR (1 << 1)
+#define UVC_TRACE_CONTROL (1 << 2)
+#define UVC_TRACE_FORMAT (1 << 3)
+#define UVC_TRACE_CAPTURE (1 << 4)
+#define UVC_TRACE_CALLS (1 << 5)
+#define UVC_TRACE_IOCTL (1 << 6)
+#define UVC_TRACE_FRAME (1 << 7)
+#define UVC_TRACE_SUSPEND (1 << 8)
+#define UVC_TRACE_STATUS (1 << 9)
+
+extern unsigned int uvc_trace_param;
+
+#define uvc_trace(flag, msg...) \
+ do { \
+ if (uvc_trace_param & flag) \
+ printk(KERN_DEBUG "uvcvideo: " msg); \
+ } while (0)
+
+#define uvc_printk(level, msg...) \
+ printk(level "uvcvideo: " msg)
+
+#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \
+ "%02x%02x%02x%02x%02x%02x"
+#define UVC_GUID_ARGS(guid) \
+ (guid)[3], (guid)[2], (guid)[1], (guid)[0], \
+ (guid)[5], (guid)[4], \
+ (guid)[7], (guid)[6], \
+ (guid)[8], (guid)[9], \
+ (guid)[10], (guid)[11], (guid)[12], \
+ (guid)[13], (guid)[14], (guid)[15]
+
+/* --------------------------------------------------------------------------
+ * Internal functions.
+ */
+
+/* Core driver */
+extern struct uvc_driver uvc_driver;
+extern void uvc_delete(struct kref *kref);
+
+/* Video buffers queue management. */
+extern void uvc_queue_init(struct uvc_video_queue *queue);
+extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
+ unsigned int nbuffers, unsigned int buflength);
+extern int uvc_free_buffers(struct uvc_video_queue *queue);
+extern int uvc_query_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf);
+extern int uvc_queue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf);
+extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+ struct v4l2_buffer *v4l2_buf, int nonblocking);
+extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
+extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
+extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+ struct uvc_buffer *buf);
+extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
+ struct file *file, poll_table *wait);
+static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
+{
+ return queue->flags & UVC_QUEUE_STREAMING;
+}
+
+/* V4L2 interface */
+extern struct file_operations uvc_fops;
+
+/* Video */
+extern int uvc_video_init(struct uvc_video_device *video);
+extern int uvc_video_suspend(struct uvc_video_device *video);
+extern int uvc_video_resume(struct uvc_video_device *video);
+extern int uvc_video_enable(struct uvc_video_device *video, int enable);
+extern int uvc_probe_video(struct uvc_video_device *video,
+ struct uvc_streaming_control *probe);
+extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
+ __u8 intfnum, __u8 cs, void *data, __u16 size);
+extern int uvc_set_video_ctrl(struct uvc_video_device *video,
+ struct uvc_streaming_control *ctrl, int probe);
+
+/* Status */
+extern int uvc_status_init(struct uvc_device *dev);
+extern void uvc_status_cleanup(struct uvc_device *dev);
+extern int uvc_status_suspend(struct uvc_device *dev);
+extern int uvc_status_resume(struct uvc_device *dev);
+
+/* Controls */
+extern struct uvc_control *uvc_find_control(struct uvc_video_device *video,
+ __u32 v4l2_id, struct uvc_control_mapping **mapping);
+extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
+ struct v4l2_queryctrl *v4l2_ctrl);
+
+extern int uvc_ctrl_add_info(struct uvc_control_info *info);
+extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping);
+extern int uvc_ctrl_init_device(struct uvc_device *dev);
+extern void uvc_ctrl_cleanup_device(struct uvc_device *dev);
+extern int uvc_ctrl_resume_device(struct uvc_device *dev);
+extern void uvc_ctrl_init(void);
+
+extern int uvc_ctrl_begin(struct uvc_video_device *video);
+extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback);
+static inline int uvc_ctrl_commit(struct uvc_video_device *video)
+{
+ return __uvc_ctrl_commit(video, 0);
+}
+static inline int uvc_ctrl_rollback(struct uvc_video_device *video)
+{
+ return __uvc_ctrl_commit(video, 1);
+}
+
+extern int uvc_ctrl_get(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl);
+extern int uvc_ctrl_set(struct uvc_video_device *video,
+ struct v4l2_ext_control *xctrl);
+
+extern int uvc_xu_ctrl_query(struct uvc_video_device *video,
+ struct uvc_xu_control *ctrl, int set);
+
+/* Utility functions */
+extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator,
+ unsigned int n_terms, unsigned int threshold);
+extern uint32_t uvc_fraction_to_interval(uint32_t numerator,
+ uint32_t denominator);
+extern struct usb_host_endpoint *uvc_find_endpoint(
+ struct usb_host_interface *alts, __u8 epaddr);
+
+/* Quirks support */
+void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video,
+ struct uvc_buffer *buf);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index 31e8af0ba27..67a661cf521 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -51,12 +51,51 @@
#define VIDEO_NUM_DEVICES 256
#define VIDEO_NAME "video4linux"
+struct std_descr {
+ v4l2_std_id std;
+ const char *descr;
+};
+
+static const struct std_descr standards[] = {
+ { V4L2_STD_NTSC, "NTSC" },
+ { V4L2_STD_NTSC_M, "NTSC-M" },
+ { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" },
+ { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" },
+ { V4L2_STD_NTSC_443, "NTSC-443" },
+ { V4L2_STD_PAL, "PAL" },
+ { V4L2_STD_PAL_BG, "PAL-BG" },
+ { V4L2_STD_PAL_B, "PAL-B" },
+ { V4L2_STD_PAL_B1, "PAL-B1" },
+ { V4L2_STD_PAL_G, "PAL-G" },
+ { V4L2_STD_PAL_H, "PAL-H" },
+ { V4L2_STD_PAL_I, "PAL-I" },
+ { V4L2_STD_PAL_DK, "PAL-DK" },
+ { V4L2_STD_PAL_D, "PAL-D" },
+ { V4L2_STD_PAL_D1, "PAL-D1" },
+ { V4L2_STD_PAL_K, "PAL-K" },
+ { V4L2_STD_PAL_M, "PAL-M" },
+ { V4L2_STD_PAL_N, "PAL-N" },
+ { V4L2_STD_PAL_Nc, "PAL-Nc" },
+ { V4L2_STD_PAL_60, "PAL-60" },
+ { V4L2_STD_SECAM, "SECAM" },
+ { V4L2_STD_SECAM_B, "SECAM-B" },
+ { V4L2_STD_SECAM_G, "SECAM-G" },
+ { V4L2_STD_SECAM_H, "SECAM-H" },
+ { V4L2_STD_SECAM_DK, "SECAM-DK" },
+ { V4L2_STD_SECAM_D, "SECAM-D" },
+ { V4L2_STD_SECAM_K, "SECAM-K" },
+ { V4L2_STD_SECAM_K1, "SECAM-K1" },
+ { V4L2_STD_SECAM_L, "SECAM-L" },
+ { V4L2_STD_SECAM_LC, "SECAM-Lc" },
+ { 0, "Unknown" }
+};
+
/* video4linux standard ID conversion to standard name
*/
-char *v4l2_norm_to_name(v4l2_std_id id)
+const char *v4l2_norm_to_name(v4l2_std_id id)
{
- char *name;
u32 myid = id;
+ int i;
/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
64 bit comparations. So, on that architecture, with some gcc
@@ -64,110 +103,17 @@ char *v4l2_norm_to_name(v4l2_std_id id)
*/
BUG_ON(myid != id);
- switch (myid) {
- case V4L2_STD_PAL:
- name = "PAL";
- break;
- case V4L2_STD_PAL_BG:
- name = "PAL-BG";
- break;
- case V4L2_STD_PAL_DK:
- name = "PAL-DK";
- break;
- case V4L2_STD_PAL_B:
- name = "PAL-B";
- break;
- case V4L2_STD_PAL_B1:
- name = "PAL-B1";
- break;
- case V4L2_STD_PAL_G:
- name = "PAL-G";
- break;
- case V4L2_STD_PAL_H:
- name = "PAL-H";
- break;
- case V4L2_STD_PAL_I:
- name = "PAL-I";
- break;
- case V4L2_STD_PAL_D:
- name = "PAL-D";
- break;
- case V4L2_STD_PAL_D1:
- name = "PAL-D1";
- break;
- case V4L2_STD_PAL_K:
- name = "PAL-K";
- break;
- case V4L2_STD_PAL_M:
- name = "PAL-M";
- break;
- case V4L2_STD_PAL_N:
- name = "PAL-N";
- break;
- case V4L2_STD_PAL_Nc:
- name = "PAL-Nc";
- break;
- case V4L2_STD_PAL_60:
- name = "PAL-60";
- break;
- case V4L2_STD_NTSC:
- name = "NTSC";
- break;
- case V4L2_STD_NTSC_M:
- name = "NTSC-M";
- break;
- case V4L2_STD_NTSC_M_JP:
- name = "NTSC-M-JP";
- break;
- case V4L2_STD_NTSC_443:
- name = "NTSC-443";
- break;
- case V4L2_STD_NTSC_M_KR:
- name = "NTSC-M-KR";
- break;
- case V4L2_STD_SECAM:
- name = "SECAM";
- break;
- case V4L2_STD_SECAM_DK:
- name = "SECAM-DK";
- break;
- case V4L2_STD_SECAM_B:
- name = "SECAM-B";
- break;
- case V4L2_STD_SECAM_D:
- name = "SECAM-D";
- break;
- case V4L2_STD_SECAM_G:
- name = "SECAM-G";
- break;
- case V4L2_STD_SECAM_H:
- name = "SECAM-H";
- break;
- case V4L2_STD_SECAM_K:
- name = "SECAM-K";
- break;
- case V4L2_STD_SECAM_K1:
- name = "SECAM-K1";
- break;
- case V4L2_STD_SECAM_L:
- name = "SECAM-L";
- break;
- case V4L2_STD_SECAM_LC:
- name = "SECAM-LC";
- break;
- default:
- name = "Unknown";
- break;
- }
-
- return name;
+ for (i = 0; standards[i].std; i++)
+ if (myid == standards[i].std)
+ break;
+ return standards[i].descr;
}
EXPORT_SYMBOL(v4l2_norm_to_name);
/* Fill in the fields of a v4l2_standard structure according to the
'id' and 'transmission' parameters. Returns negative on error. */
int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name)
+ int id, const char *name)
{
u32 index = vs->index;
@@ -1218,95 +1164,40 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
case VIDIOC_ENUMSTD:
{
struct v4l2_standard *p = arg;
- v4l2_std_id id = vfd->tvnorms,curr_id=0;
- unsigned int index = p->index,i;
-
- if (index<0) {
- ret=-EINVAL;
- break;
- }
-
- /* Return norm array on a canonical way */
- for (i=0;i<= index && id; i++) {
- if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) {
- curr_id = V4L2_STD_PAL;
- } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) {
- curr_id = V4L2_STD_PAL_BG;
- } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) {
- curr_id = V4L2_STD_PAL_DK;
- } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) {
- curr_id = V4L2_STD_PAL_B;
- } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) {
- curr_id = V4L2_STD_PAL_B1;
- } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) {
- curr_id = V4L2_STD_PAL_G;
- } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) {
- curr_id = V4L2_STD_PAL_H;
- } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) {
- curr_id = V4L2_STD_PAL_I;
- } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) {
- curr_id = V4L2_STD_PAL_D;
- } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) {
- curr_id = V4L2_STD_PAL_D1;
- } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) {
- curr_id = V4L2_STD_PAL_K;
- } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) {
- curr_id = V4L2_STD_PAL_M;
- } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) {
- curr_id = V4L2_STD_PAL_N;
- } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) {
- curr_id = V4L2_STD_PAL_Nc;
- } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) {
- curr_id = V4L2_STD_PAL_60;
- } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
- curr_id = V4L2_STD_NTSC;
- } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) {
- curr_id = V4L2_STD_NTSC_M;
- } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) {
- curr_id = V4L2_STD_NTSC_M_JP;
- } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) {
- curr_id = V4L2_STD_NTSC_443;
- } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) {
- curr_id = V4L2_STD_NTSC_M_KR;
- } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
- curr_id = V4L2_STD_SECAM;
- } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) {
- curr_id = V4L2_STD_SECAM_DK;
- } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) {
- curr_id = V4L2_STD_SECAM_B;
- } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) {
- curr_id = V4L2_STD_SECAM_D;
- } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) {
- curr_id = V4L2_STD_SECAM_G;
- } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) {
- curr_id = V4L2_STD_SECAM_H;
- } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) {
- curr_id = V4L2_STD_SECAM_K;
- } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) {
- curr_id = V4L2_STD_SECAM_K1;
- } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) {
- curr_id = V4L2_STD_SECAM_L;
- } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) {
- curr_id = V4L2_STD_SECAM_LC;
- } else {
+ v4l2_std_id id = vfd->tvnorms, curr_id = 0;
+ unsigned int index = p->index, i, j = 0;
+ const char *descr = "";
+
+ /* Return norm array in a canonical way */
+ for (i = 0; i <= index && id; i++) {
+ /* last std value in the standards array is 0, so this
+ while always ends there since (id & 0) == 0. */
+ while ((id & standards[j].std) != standards[j].std)
+ j++;
+ curr_id = standards[j].std;
+ descr = standards[j].descr;
+ j++;
+ if (curr_id == 0)
break;
- }
- id &= ~curr_id;
+ if (curr_id != V4L2_STD_PAL &&
+ curr_id != V4L2_STD_SECAM &&
+ curr_id != V4L2_STD_NTSC)
+ id &= ~curr_id;
}
- if (i<=index)
+ if (i <= index)
return -EINVAL;
- v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id));
+ v4l2_video_std_construct(p, curr_id, descr);
p->index = index;
- dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
+ dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
"framelines=%d\n", p->index,
(unsigned long long)p->id, p->name,
p->frameperiod.numerator,
p->frameperiod.denominator,
p->framelines);
- ret=0;
+ ret = 0;
break;
}
case VIDIOC_G_STD:
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 845be1864f6..5ff9a58b613 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -327,13 +327,14 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
int hmax = buf->vb.height;
int wmax = buf->vb.width;
struct timeval ts;
- char *tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ char *tmpbuf;
void *vbuf = videobuf_to_vmalloc(&buf->vb);
- if (!tmpbuf)
+ if (!vbuf)
return;
- if (!vbuf)
+ tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ if (!tmpbuf)
return;
for (h = 0; h < hmax; h++) {
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index fe872fbd671..e01926b7b5b 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0091"
+#define DRV_VERSION "EHEA_0092"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
@@ -452,7 +452,7 @@ struct ehea_bcmc_reg_entry {
struct ehea_bcmc_reg_array {
struct ehea_bcmc_reg_entry *arr;
int num_entries;
- struct mutex lock;
+ spinlock_t lock;
};
#define EHEA_PORT_UP 1
@@ -478,6 +478,7 @@ struct ehea_port {
int num_add_tx_qps;
int num_mcs;
int resets;
+ u64 flags;
u64 mac_addr;
u32 logical_port_id;
u32 port_speed;
@@ -501,7 +502,8 @@ struct port_res_cfg {
};
enum ehea_flag_bits {
- __EHEA_STOP_XFER
+ __EHEA_STOP_XFER,
+ __EHEA_DISABLE_PORT_RESET
};
void ehea_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 075fd547421..0920b796bd7 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -118,6 +118,7 @@ static struct of_device_id ehea_device_table[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, ehea_device_table);
static struct of_platform_driver ehea_driver = {
.name = "ehea",
@@ -137,6 +138,12 @@ void ehea_dump(void *adr, int len, char *msg)
}
}
+void ehea_schedule_port_reset(struct ehea_port *port)
+{
+ if (!test_bit(__EHEA_DISABLE_PORT_RESET, &port->flags))
+ schedule_work(&port->reset_task);
+}
+
static void ehea_update_firmware_handles(void)
{
struct ehea_fw_handle_entry *arr = NULL;
@@ -241,7 +248,7 @@ static void ehea_update_bcmc_registrations(void)
}
if (num_registrations) {
- arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+ arr = kzalloc(num_registrations * sizeof(*arr), GFP_ATOMIC);
if (!arr)
return; /* Keep the existing array */
} else
@@ -301,7 +308,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev)
memset(stats, 0, sizeof(*stats));
- cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ cb2 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
if (!cb2) {
ehea_error("no mem for cb2");
goto out;
@@ -587,7 +594,7 @@ static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq,
"Resetting port.", pr->qp->init_attr.qp_nr);
ehea_dump(cqe, sizeof(*cqe), "CQE");
}
- schedule_work(&pr->port->reset_task);
+ ehea_schedule_port_reset(pr->port);
return 1;
}
@@ -616,7 +623,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
*tcph = tcp_hdr(skb);
/* check if ip header and tcp header are complete */
- if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+ if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
@@ -765,7 +772,7 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota)
ehea_error("Send Completion Error: Resetting port");
if (netif_msg_tx_err(pr->port))
ehea_dump(cqe, sizeof(*cqe), "Send CQE");
- schedule_work(&pr->port->reset_task);
+ ehea_schedule_port_reset(pr->port);
break;
}
@@ -885,7 +892,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
eqe = ehea_poll_eq(port->qp_eq);
}
- schedule_work(&port->reset_task);
+ ehea_schedule_port_reset(port);
return IRQ_HANDLED;
}
@@ -1763,7 +1770,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
if (port->state == EHEA_PORT_UP) {
@@ -1785,7 +1792,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
out_upregs:
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
@@ -1947,7 +1954,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
ehea_promiscuous(dev, 0);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
@@ -1978,7 +1985,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
out:
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
return;
}
@@ -2497,7 +2504,7 @@ static int ehea_up(struct net_device *dev)
}
}
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
@@ -2520,7 +2527,7 @@ out:
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
ehea_update_firmware_handles();
mutex_unlock(&ehea_fw_handles.lock);
@@ -2575,7 +2582,7 @@ static int ehea_down(struct net_device *dev)
mutex_lock(&ehea_fw_handles.lock);
- mutex_lock(&ehea_bcmc_regs.lock);
+ spin_lock(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
@@ -2584,7 +2591,7 @@ static int ehea_down(struct net_device *dev)
port->state = EHEA_PORT_DOWN;
ehea_update_bcmc_registrations();
- mutex_unlock(&ehea_bcmc_regs.lock);
+ spin_unlock(&ehea_bcmc_regs.lock);
ret = ehea_clean_all_portres(port);
if (ret)
@@ -2605,13 +2612,14 @@ static int ehea_stop(struct net_device *dev)
if (netif_msg_ifdown(port))
ehea_info("disabling port %s", dev->name);
+ set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
cancel_work_sync(&port->reset_task);
-
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
ret = ehea_down(dev);
mutex_unlock(&port->port_lock);
+ clear_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
return ret;
}
@@ -2941,7 +2949,7 @@ static void ehea_tx_watchdog(struct net_device *dev)
if (netif_carrier_ok(dev) &&
!test_bit(__EHEA_STOP_XFER, &ehea_driver_flags))
- schedule_work(&port->reset_task);
+ ehea_schedule_port_reset(port);
}
int ehea_sense_adapter_attr(struct ehea_adapter *adapter)
@@ -3590,7 +3598,7 @@ int __init ehea_module_init(void)
memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
mutex_init(&ehea_fw_handles.lock);
- mutex_init(&ehea_bcmc_regs.lock);
+ spin_lock_init(&ehea_bcmc_regs.lock);
ret = check_module_parm();
if (ret)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index afd063fe11a..786d668c612 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -4198,12 +4198,23 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
netif_carrier_off(dev);
if (netif_running(dev)) {
+ unsigned long flags;
+
nv_disable_irq(dev);
netif_tx_lock_bh(dev);
- spin_lock(&np->lock);
+ /* with plain spinlock lockdep complains */
+ spin_lock_irqsave(&np->lock, flags);
/* stop engines */
+ /* FIXME:
+ * this can take some time, and interrupts are disabled
+ * due to spin_lock_irqsave, but let's hope no daemon
+ * is going to change the settings very often...
+ * Worst case:
+ * NV_RXSTOP_DELAY1MAX + NV_TXSTOP_DELAY1MAX
+ * + some minor delays, which is up to a second approximately
+ */
nv_stop_rxtx(dev);
- spin_unlock(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
netif_tx_unlock_bh(dev);
}
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index e36321152d5..8268b3535b3 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -463,6 +463,9 @@ static void restart(struct net_device *dev)
else
C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
}
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 5d2108c5ac7..babc79ad490 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1636,6 +1636,12 @@ static int emac_poll_rx(void *param, int budget)
goto next;
}
+ if (len < ETH_HLEN) {
+ ++dev->estats.rx_dropped_stack;
+ emac_recycle_rx_skb(dev, slot, len);
+ goto next;
+ }
+
if (len && len < EMAC_RX_COPY_THRESH) {
struct sk_buff *copy_skb =
alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
@@ -2719,6 +2725,8 @@ static int __devinit emac_probe(struct of_device *ofdev,
/* Clean rings */
memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+ memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *));
+ memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *));
/* Attach to ZMII, if needed */
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) &&
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 3b2a6c59808..993d87c9296 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -277,7 +277,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
*tcph = tcp_hdr(skb);
/* check if ip header and tcp header are complete */
- if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+ if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 109bab34094..62e93dac6b1 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -992,6 +992,7 @@ static int fr_rx(struct sk_buff *skb)
dev->stats.rx_bytes += skb->len;
if (pvc->state.becn)
dev->stats.rx_compressed++;
+ skb->dev = dev;
netif_rx(skb);
return NET_RX_SUCCESS;
} else {
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index d669e5956ce..f106bc1585a 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -64,7 +64,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
int hdrlen, phdrlen, head_need, tail_need;
u16 fc;
int prism_header, ret;
- struct ieee80211_hdr_4addr *hdr;
+ struct ieee80211_hdr_4addr *fhdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -86,8 +86,8 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
phdrlen = 0;
}
- hdr = (struct ieee80211_hdr_4addr *) skb->data;
- fc = le16_to_cpu(hdr->frame_ctl);
+ fhdr = (struct ieee80211_hdr_4addr *) skb->data;
+ fc = le16_to_cpu(fhdr->frame_ctl);
if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) {
printk(KERN_DEBUG "%s: dropped management frame with header "
@@ -572,7 +572,7 @@ hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr,
hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff ||
hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) {
/* RA (or BSSID) is not ours - drop */
- PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with "
+ PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with "
"not own or broadcast %s=%s\n",
local->dev->name,
fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID",
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 06b23df8f69..af3d4ef2a80 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1930,7 +1930,7 @@ static void handle_pspoll(local_info_t *local,
PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n");
return;
}
- aid &= ~BIT(15) & ~BIT(14);
+ aid &= ~(BIT(15) | BIT(14));
if (aid == 0 || aid > MAX_AID_TABLE_SIZE) {
PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid);
return;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ed4317a17cb..80039a0ae02 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -533,10 +533,10 @@ static void prism2_detach(struct pcmcia_device *link)
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define CFG_CHECK2(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
- cs_error(link, fn, ret); \
+do { int _ret = (retf); \
+if (_ret != 0) { \
+ PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
+ cs_error(link, fn, _ret); \
goto next_entry; \
} \
} while (0)
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 79a9bc95d2a..6c158a56948 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2835,7 +2835,7 @@ static void hostap_passive_scan(unsigned long data)
{
local_info_t *local = (local_info_t *) data;
struct net_device *dev = local->dev;
- u16 channel;
+ u16 chan;
if (local->passive_scan_interval <= 0)
return;
@@ -2872,11 +2872,11 @@ static void hostap_passive_scan(unsigned long data)
printk(KERN_DEBUG "%s: passive scan channel %d\n",
dev->name, local->passive_scan_channel);
- channel = local->passive_scan_channel;
+ chan = local->passive_scan_channel;
local->passive_scan_state = PASSIVE_SCAN_WAIT;
local->passive_scan_timer.expires = jiffies + HZ / 10;
} else {
- channel = local->channel;
+ chan = local->channel;
local->passive_scan_state = PASSIVE_SCAN_LISTEN;
local->passive_scan_timer.expires = jiffies +
local->passive_scan_interval * HZ;
@@ -2884,9 +2884,9 @@ static void hostap_passive_scan(unsigned long data)
if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST |
(HFA384X_TEST_CHANGE_CHANNEL << 8),
- channel, NULL, 0))
+ chan, NULL, 0))
printk(KERN_ERR "%s: passive scan channel set %d "
- "failed\n", dev->name, channel);
+ "failed\n", dev->name, chan);
add_timer(&local->passive_scan_timer);
}
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index b5213f61fb0..756ab56c1f4 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -594,7 +594,8 @@ void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx)
}
-int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+static int hostap_80211_header_parse(const struct sk_buff *skb,
+ unsigned char *haddr)
{
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
return ETH_ALEN;
@@ -839,7 +840,6 @@ const struct header_ops hostap_80211_ops = {
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
-
.parse = hostap_80211_header_parse,
};
EXPORT_SYMBOL(hostap_80211_ops);
@@ -1132,7 +1132,6 @@ EXPORT_SYMBOL(hostap_set_roaming);
EXPORT_SYMBOL(hostap_set_auth_algs);
EXPORT_SYMBOL(hostap_dump_rx_header);
EXPORT_SYMBOL(hostap_dump_tx_header);
-EXPORT_SYMBOL(hostap_80211_header_parse);
EXPORT_SYMBOL(hostap_80211_get_hdrlen);
EXPORT_SYMBOL(hostap_get_stats);
EXPORT_SYMBOL(hostap_setup_dev);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 63f20370032..38866ab0040 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -590,8 +590,12 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
if (rate == -1)
iwl3945_rt->rt_rate = 0;
- else
+ else {
+ if (stats->band == IEEE80211_BAND_5GHZ)
+ rate += IWL_FIRST_OFDM_RATE;
+
iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee;
+ }
/* antenna number */
antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 3bc2644039f..baa1abd5a14 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -6694,6 +6694,12 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
IWL_DEBUG_MAC80211("enter\n");
+ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+ IWL_DEBUG_MAC80211("leave - monitor\n");
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index ba0f28945eb..60b7a6498fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -2682,7 +2682,8 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
IWL_DEBUG_MAC80211("leave - monitor\n");
- return -1;
+ dev_kfree_skb_any(skb);
+ return 0;
}
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 24783103a7d..a8b4abce5bf 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -947,6 +947,7 @@ static struct usb_driver if_usb_driver = {
.id_table = if_usb_table,
.suspend = if_usb_suspend,
.resume = if_usb_resume,
+ .reset_resume = if_usb_resume,
};
static int __init if_usb_init_module(void)
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ec8f7002b09..39bb96b413e 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size,
int ret;
int begin, end, i;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE ||
- size > PCI_VPD_PCI22_SIZE - pos)
+ if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos)
return -EINVAL;
if (size == 0)
return 0;
@@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size,
u32 val;
int ret;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 ||
- size > PCI_VPD_PCI22_SIZE - pos || size < 4)
+ if (pos < 0 || pos > vpd->base.len || pos & 3 ||
+ size > vpd->base.len - pos || size < 4)
return -EINVAL;
val = (u8) *buf++;
@@ -255,11 +254,6 @@ out:
return 4;
}
-static int pci_vpd_pci22_get_size(struct pci_dev *dev)
-{
- return PCI_VPD_PCI22_SIZE;
-}
-
static void pci_vpd_pci22_release(struct pci_dev *dev)
{
kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
@@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev)
static struct pci_vpd_ops pci_vpd_pci22_ops = {
.read = pci_vpd_pci22_read,
.write = pci_vpd_pci22_write,
- .get_size = pci_vpd_pci22_get_size,
.release = pci_vpd_pci22_release,
};
@@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
if (!vpd)
return -ENOMEM;
+ vpd->base.len = PCI_VPD_PCI22_SIZE;
vpd->base.ops = &pci_vpd_pci22_ops;
spin_lock_init(&vpd->lock);
vpd->cap = cap;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 648596d469f..91156f85a92 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -700,9 +700,10 @@ cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
cleanup_p2p_bridge, NULL, NULL);
- if (!(bridge = acpiphp_handle_to_bridge(handle)))
- return AE_OK;
- cleanup_bridge(bridge);
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge)
+ cleanup_bridge(bridge);
+
return AE_OK;
}
@@ -715,9 +716,19 @@ static void remove_bridge(acpi_handle handle)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
(u32)1, cleanup_p2p_bridge, NULL, NULL);
+ /*
+ * On root bridges with hotplug slots directly underneath (ie,
+ * no p2p bridge inbetween), we call cleanup_bridge().
+ *
+ * The else clause cleans up root bridges that either had no
+ * hotplug slots at all, or had a p2p bridge underneath.
+ */
bridge = acpiphp_handle_to_bridge(handle);
if (bridge)
cleanup_bridge(bridge);
+ else
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ handle_hotplug_event_bridge);
}
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 72cf61ed8f9..e1637bd82b8 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
any need to change it. */
struct mempolicy *oldpol;
cpumask_t oldmask = current->cpus_allowed;
- int node = pcibus_to_node(dev->bus);
+ int node = dev_to_node(&dev->dev);
if (node >= 0) {
node_to_cpumask_ptr(nodecpumask, node);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 271d41cc05a..9c718583a23 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -489,13 +489,13 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr,
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
*
* Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining? maybe automatic for prefetchable regions?
*/
static int
pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
@@ -518,7 +518,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+ return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 1);
}
/**
@@ -541,9 +555,46 @@ pci_remove_resource_files(struct pci_dev *pdev)
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
+
+ res_attr = pdev->res_attr_wc[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
}
}
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+ /* allocate attribute structure, piggyback attribute name */
+ int name_len = write_combine ? 13 : 10;
+ struct bin_attribute *res_attr;
+ int retval;
+
+ res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+ if (res_attr) {
+ char *res_attr_name = (char *)(res_attr + 1);
+
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ } else
+ retval = -ENOMEM;
+
+ return retval;
+}
+
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
@@ -557,31 +608,19 @@ static int pci_create_resource_files(struct pci_dev *pdev)
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
- /* allocate attribute structure, piggyback attribute name */
- res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
-
- pdev->res_attr[i] = res_attr;
- sprintf(res_attr_name, "resource%d", i);
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, i);
- res_attr->mmap = pci_mmap_resource;
- res_attr->private = &pdev->resource[i];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- if (retval) {
- pci_remove_resource_files(pdev);
- return retval;
- }
- } else {
- return -ENOMEM;
+ retval = pci_create_attr(pdev, i, 0);
+ /* for prefetchable resources, create a WC mappable file */
+ if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ retval = pci_create_attr(pdev, i, 1);
+
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
}
}
return 0;
@@ -697,9 +736,9 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
if (attr) {
pdev->vpd->attr = attr;
- attr->size = pdev->vpd->ops->get_size(pdev);
+ attr->size = pdev->vpd->len;
attr->attr.name = "vpd";
- attr->attr.mode = S_IRUGO | S_IWUSR;
+ attr->attr.mode = S_IRUSR | S_IWUSR;
attr->read = pci_read_vpd;
attr->write = pci_write_vpd;
retval = sysfs_create_bin_file(&pdev->dev.kobj, attr);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 0a497c1b422..00408c97e5f 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
struct pci_vpd_ops {
int (*read)(struct pci_dev *dev, int pos, int size, char *buf);
int (*write)(struct pci_dev *dev, int pos, int size, const char *buf);
- int (*get_size)(struct pci_dev *dev);
void (*release)(struct pci_dev *dev);
};
struct pci_vpd {
+ unsigned int len;
struct pci_vpd_ops *ops;
struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
};
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dabb563f51d..a3497dc6ebc 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+/*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device. This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
+ * will dump 32k of data. Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang. Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+{
+ /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+ if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+ ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+ (dev->revision & 0xf0) == 0x0)) {
+ if (dev->vpd)
+ dev->vpd->len = 0x80;
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 82f62d25f92..67421b0d3a7 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -331,14 +331,14 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
RCNR = 0;
}
+ device_init_wakeup(&pdev->dev, 1);
+
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
- device_init_wakeup(&pdev->dev, 1);
-
platform_set_drvdata(pdev, rtc);
return 0;
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 72c8992fdf2..a6644b332b5 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -85,7 +85,7 @@ typedef unsigned int sigINT;
/* ------------------------------------------------------------------ */
/* What type of processor the file is meant to run on. */
/* This will let us know whether to read sigWORDs as high/low or low/high. */
-#define PROC_INTEL 0x00 /* Intel 80x86 */
+#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */
#define PROC_MOTOROLA 0x01 /* Motorola 68K */
#define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */
#define PROC_ALPHA 0x03 /* DEC Alpha */
@@ -104,6 +104,7 @@ typedef unsigned int sigINT;
#define PROC_486 0x08 /* Intel 80486 */
#define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */
#define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */
+#define PROC_IA64 0x40 /* Intel IA64 processor */
/* PROC_i960: */
#define PROC_960RX 0x01 /* Intel 80960RC/RD */
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index a0b6d414953..59fbef08d69 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2359,6 +2359,24 @@ void scsi_esp_unregister(struct esp *esp)
}
EXPORT_SYMBOL(scsi_esp_unregister);
+static int esp_target_alloc(struct scsi_target *starget)
+{
+ struct esp *esp = shost_priv(dev_to_shost(&starget->dev));
+ struct esp_target_data *tp = &esp->target[starget->id];
+
+ tp->starget = starget;
+
+ return 0;
+}
+
+static void esp_target_destroy(struct scsi_target *starget)
+{
+ struct esp *esp = shost_priv(dev_to_shost(&starget->dev));
+ struct esp_target_data *tp = &esp->target[starget->id];
+
+ tp->starget = NULL;
+}
+
static int esp_slave_alloc(struct scsi_device *dev)
{
struct esp *esp = shost_priv(dev->host);
@@ -2370,8 +2388,6 @@ static int esp_slave_alloc(struct scsi_device *dev)
return -ENOMEM;
dev->hostdata = lp;
- tp->starget = dev->sdev_target;
-
spi_min_period(tp->starget) = esp->min_period;
spi_max_offset(tp->starget) = 15;
@@ -2608,6 +2624,8 @@ struct scsi_host_template scsi_esp_template = {
.name = "esp",
.info = esp_info,
.queuecommand = esp_queuecommand,
+ .target_alloc = esp_target_alloc,
+ .target_destroy = esp_target_destroy,
.slave_alloc = esp_slave_alloc,
.slave_configure = esp_slave_configure,
.slave_destroy = esp_slave_destroy,
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 3690360d7a7..c6457bfc8a4 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -456,6 +456,10 @@ static int __scsi_host_match(struct device *dev, void *data)
*
* Return value:
* A pointer to located Scsi_Host or NULL.
+ *
+ * The caller must do a scsi_host_put() to drop the reference
+ * that scsi_host_get() took. The put_device() below dropped
+ * the reference from class_find_device().
**/
struct Scsi_Host *scsi_host_lookup(unsigned short hostnum)
{
@@ -463,9 +467,10 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum)
struct Scsi_Host *shost = ERR_PTR(-ENXIO);
cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match);
- if (cdev)
+ if (cdev) {
shost = scsi_host_get(class_to_shost(cdev));
-
+ put_device(cdev);
+ }
return shost;
}
EXPORT_SYMBOL(scsi_host_lookup);
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 45df83b9d84..0fe031f003e 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -61,7 +61,7 @@ static int ses_probe(struct device *dev)
return err;
}
-#define SES_TIMEOUT 30
+#define SES_TIMEOUT (30 * HZ)
#define SES_RETRIES 3
static int ses_recv_diag(struct scsi_device *sdev, int page_code,
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 7ee86d4a761..c82df8bd4d8 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -178,6 +178,9 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr)
the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL,
0, sshdr, SR_TIMEOUT,
retries--);
+ if (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)
+ sdev->changed = 1;
} while (retries > 0 &&
(!scsi_status_is_good(the_result) ||
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index f20952c43cb..fd9bb777df2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -49,6 +49,7 @@
#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
+#define CTS_CHECK_JIFFIES (HZ / 50)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
{
struct circ_buf *xmit = &uart->port.info->xmit;
- if (uart->port.x_char) {
- UART_PUT_CHAR(uart, uart->port.x_char);
- uart->port.icount.tx++;
- uart->port.x_char = 0;
- }
/*
* Check the modem control lines before
* transmitting anything.
@@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
return;
}
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ }
+
while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
- struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
- bfin_serial_mctrl_check(uart);
-}
-#endif
-
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
@@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
uart->tx_done = 0;
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
uart->tx_count = 0;
uart->tx_done = 1;
@@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
uart->port.x_char = 0;
}
- /*
- * Check the modem control lines before
- * transmitting anything.
- */
- bfin_serial_mctrl_check(uart);
-
uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
- schedule_work(&uart->cts_workqueue);
+ uart->cts_timer.data = (unsigned long)(uart);
+ uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+ uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+ add_timer(&(uart->cts_timer));
} else {
tty->hw_stopped = 0;
}
@@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void)
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+ init_timer(&(bfin_serial_ports[i].cts_timer));
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 4b628526df0..a86e952ed4c 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -12,3 +12,12 @@ menuconfig THERMAL
cooling devices.
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
+
+config THERMAL_HWMON
+ bool "Hardware monitoring support"
+ depends on HWMON=y || HWMON=THERMAL
+ help
+ The generic thermal sysfs driver's hardware monitoring support
+ requires a 2.10.7/3.0.2 or later lm-sensors userspace.
+
+ Say Y if your user-space is new enough.
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 6098787341f..fe07462d594 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -295,8 +295,8 @@ thermal_cooling_device_trip_point_show(struct device *dev,
/* Device management */
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
+
/* hwmon sys I/F */
#include <linux/hwmon.h>
static LIST_HEAD(thermal_hwmon_list);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 3da1ab4b389..c070b34b669 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* appletouch */
+ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 7dcda187d9b..fafe7db20d6 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1246,7 +1246,7 @@ static int pxafb_resume(struct platform_device *dev)
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
+static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
{
/*
* We reserve one page for the palette, plus the size
@@ -1348,7 +1348,7 @@ decode_mode:
pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
}
-static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
+static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
{
struct pxafb_info *fbi;
void *addr;
@@ -1410,7 +1410,7 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
}
#ifdef CONFIG_FB_PXA_PARAMETERS
-static int __init parse_opt_mode(struct device *dev, const char *this_opt)
+static int __devinit parse_opt_mode(struct device *dev, const char *this_opt)
{
struct pxafb_mach_info *inf = dev->platform_data;
@@ -1469,7 +1469,7 @@ done:
return 0;
}
-static int __init parse_opt(struct device *dev, char *this_opt)
+static int __devinit parse_opt(struct device *dev, char *this_opt)
{
struct pxafb_mach_info *inf = dev->platform_data;
struct pxafb_mode_info *mode = &inf->modes[0];
@@ -1567,7 +1567,7 @@ static int __init parse_opt(struct device *dev, char *this_opt)
return 0;
}
-static int __init pxafb_parse_options(struct device *dev, char *options)
+static int __devinit pxafb_parse_options(struct device *dev, char *options)
{
char *this_opt;
int ret;
@@ -1588,8 +1588,8 @@ static int __init pxafb_parse_options(struct device *dev, char *options)
static char g_options[256] __devinitdata = "";
-#ifndef CONFIG_MODULES
-static int __devinit pxafb_setup_options(void)
+#ifndef MODULE
+static int __init pxafb_setup_options(void)
{
char *options = NULL;
@@ -1613,7 +1613,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
#define pxafb_setup_options() (0)
#endif
-static int __init pxafb_probe(struct platform_device *dev)
+static int __devinit pxafb_probe(struct platform_device *dev)
{
struct pxafb_info *fbi;
struct pxafb_mach_info *inf;
@@ -1685,14 +1685,14 @@ static int __init pxafb_probe(struct platform_device *dev)
if (r == NULL) {
dev_err(&dev->dev, "no I/O memory resource defined\n");
ret = -ENODEV;
- goto failed;
+ goto failed_fbi;
}
r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
if (r == NULL) {
dev_err(&dev->dev, "failed to request I/O memory\n");
ret = -EBUSY;
- goto failed;
+ goto failed_fbi;
}
fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
@@ -1735,8 +1735,17 @@ static int __init pxafb_probe(struct platform_device *dev)
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
*/
- pxafb_check_var(&fbi->fb.var, &fbi->fb);
- pxafb_set_par(&fbi->fb);
+ ret = pxafb_check_var(&fbi->fb.var, &fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "failed to get suitable mode\n");
+ goto failed_free_irq;
+ }
+
+ ret = pxafb_set_par(&fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "Failed to set parameters\n");
+ goto failed_free_irq;
+ }
platform_set_drvdata(dev, fbi);
@@ -1744,7 +1753,7 @@ static int __init pxafb_probe(struct platform_device *dev)
if (ret < 0) {
dev_err(&dev->dev,
"Failed to register framebuffer device: %d\n", ret);
- goto failed_free_irq;
+ goto failed_free_cmap;
}
#ifdef CONFIG_CPU_FREQ
@@ -1763,18 +1772,23 @@ static int __init pxafb_probe(struct platform_device *dev)
return 0;
+failed_free_cmap:
+ if (fbi->fb.cmap.len)
+ fb_dealloc_cmap(&fbi->fb.cmap);
failed_free_irq:
free_irq(irq, fbi);
-failed_free_res:
- release_mem_region(r->start, r->end - r->start + 1);
-failed_free_io:
- iounmap(fbi->mmio_base);
failed_free_mem:
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
-failed:
+failed_free_io:
+ iounmap(fbi->mmio_base);
+failed_free_res:
+ release_mem_region(r->start, r->end - r->start + 1);
+failed_fbi:
+ clk_put(fbi->clk);
platform_set_drvdata(dev, NULL);
kfree(fbi);
+failed:
return ret;
}
@@ -1787,7 +1801,7 @@ static struct platform_driver pxafb_driver = {
},
};
-static int __devinit pxafb_init(void)
+static int __init pxafb_init(void)
{
if (pxafb_setup_options())
return -EINVAL;
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 0f3c2bb7bf3..7084e7e146c 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -124,9 +124,9 @@ static int virtio_dev_probe(struct device *_d)
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else {
- add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
/* They should never have set feature bits beyond 32 */
dev->config->set_features(dev, dev->features[0]);
+ add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
}
return err;
}
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 6a63535fc04..eaa3f2a79ff 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = {
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushl %ebp \n\t"
- "movl %esp, %ebp \n\t"
- "pusha \n\t"
- "pushf \n\t"
- "push %es \n\t"
- "push %ds \n\t"
- "pop %es \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl 4(%eax),%ebx \n\t"
- "movl 8(%eax),%ecx \n\t"
- "movl 12(%eax),%edx \n\t"
- "movl 16(%eax),%esi \n\t"
- "movl 20(%eax),%edi \n\t"
- "movl (%eax),%eax \n\t"
- "push %cs \n\t"
- "call *12(%ebp) \n\t"
- "pushf \n\t"
- "pushl %eax \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl %ebx,4(%eax) \n\t"
- "movl %ecx,8(%eax) \n\t"
- "movl %edx,12(%eax) \n\t"
- "movl %esi,16(%eax) \n\t"
- "movl %edi,20(%eax) \n\t"
- "movw %ds,24(%eax) \n\t"
- "movw %es,26(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,28(%eax) \n\t"
- "pop %es \n\t"
- "popf \n\t"
- "popa \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushl %ebp \n\t"
+ "movl %esp, %ebp \n\t"
+ "pusha \n\t"
+ "pushf \n\t"
+ "push %es \n\t"
+ "push %ds \n\t"
+ "pop %es \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl 4(%eax),%ebx \n\t"
+ "movl 8(%eax),%ecx \n\t"
+ "movl 12(%eax),%edx \n\t"
+ "movl 16(%eax),%esi \n\t"
+ "movl 20(%eax),%edi \n\t"
+ "movl (%eax),%eax \n\t"
+ "push %cs \n\t"
+ "call *12(%ebp) \n\t"
+ "pushf \n\t"
+ "pushl %eax \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl %ebx,4(%eax) \n\t"
+ "movl %ecx,8(%eax) \n\t"
+ "movl %edx,12(%eax) \n\t"
+ "movl %esi,16(%eax) \n\t"
+ "movl %edi,20(%eax) \n\t"
+ "movw %ds,24(%eax) \n\t"
+ "movw %es,26(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,28(%eax) \n\t"
+ "pop %es \n\t"
+ "popf \n\t"
+ "popa \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
+
/*
* cru_detect
@@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void)
#define HPWDT_ARCH 64
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushq %rbp \n\t"
- "movq %rsp, %rbp \n\t"
- "pushq %rax \n\t"
- "pushq %rbx \n\t"
- "pushq %rdx \n\t"
- "pushq %r12 \n\t"
- "pushq %r9 \n\t"
- "movq %rsi, %r12 \n\t"
- "movq %rdi, %r9 \n\t"
- "movl 4(%r9),%ebx \n\t"
- "movl 8(%r9),%ecx \n\t"
- "movl 12(%r9),%edx \n\t"
- "movl 16(%r9),%esi \n\t"
- "movl 20(%r9),%edi \n\t"
- "movl (%r9),%eax \n\t"
- "call *%r12 \n\t"
- "pushfq \n\t"
- "popq %r12 \n\t"
- "popfq \n\t"
- "movl %eax, (%r9) \n\t"
- "movl %ebx, 4(%r9) \n\t"
- "movl %ecx, 8(%r9) \n\t"
- "movl %edx, 12(%r9) \n\t"
- "movl %esi, 16(%r9) \n\t"
- "movl %edi, 20(%r9) \n\t"
- "movq %r12, %rax \n\t"
- "movl %eax, 28(%r9) \n\t"
- "popq %r9 \n\t"
- "popq %r12 \n\t"
- "popq %rdx \n\t"
- "popq %rbx \n\t"
- "popq %rax \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushq %rbp \n\t"
+ "movq %rsp, %rbp \n\t"
+ "pushq %rax \n\t"
+ "pushq %rbx \n\t"
+ "pushq %rdx \n\t"
+ "pushq %r12 \n\t"
+ "pushq %r9 \n\t"
+ "movq %rsi, %r12 \n\t"
+ "movq %rdi, %r9 \n\t"
+ "movl 4(%r9),%ebx \n\t"
+ "movl 8(%r9),%ecx \n\t"
+ "movl 12(%r9),%edx \n\t"
+ "movl 16(%r9),%esi \n\t"
+ "movl 20(%r9),%edi \n\t"
+ "movl (%r9),%eax \n\t"
+ "call *%r12 \n\t"
+ "pushfq \n\t"
+ "popq %r12 \n\t"
+ "popfq \n\t"
+ "movl %eax, (%r9) \n\t"
+ "movl %ebx, 4(%r9) \n\t"
+ "movl %ecx, 8(%r9) \n\t"
+ "movl %edx, 12(%r9) \n\t"
+ "movl %esi, 16(%r9) \n\t"
+ "movl %edi, 20(%r9) \n\t"
+ "movq %r12, %rax \n\t"
+ "movl %eax, 28(%r9) \n\t"
+ "popq %r9 \n\t"
+ "popq %r12 \n\t"
+ "popq %rdx \n\t"
+ "popq %rbx \n\t"
+ "popq %rax \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
/*
* dmi_find_cru
@@ -418,20 +423,23 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral != 0) {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
- }
+ if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral == 0) {
+ printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ "but unable to determine source.\n");
+ } else {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
}
- die_nmi_called = 0;
- return NOTIFY_DONE;
+ return NOTIFY_STOP;
}
/*
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 4f0f22b020e..76e5b7386af 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -529,7 +529,7 @@ void xen_evtchn_do_upcall(struct pt_regs *regs)
#ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */
/* Clear master flag /before/ clearing selector flag. */
- rmb();
+ wmb();
#endif
pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
while (pending_words != 0) {
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 0fa95b198e6..d48ff5f370f 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -16,7 +16,6 @@
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/binfmts.h>
@@ -548,7 +547,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
struct {
struct elfhdr elf_ex;
struct elfhdr interp_elf_ex;
- struct exec interp_ex;
} *loc;
loc = kmalloc(sizeof(*loc), GFP_KERNEL);
@@ -680,7 +678,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
}
/* Get the exec headers */
- loc->interp_ex = *((struct exec *)bprm->buf);
loc->interp_elf_ex = *((struct elfhdr *)bprm->buf);
break;
}
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 470c10ceb0f..10d8a0aa871 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -931,8 +931,16 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part)
struct gendisk *disk;
int ret;
int part;
+ int perm = 0;
- ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode);
+ if (file->f_mode & FMODE_READ)
+ perm |= MAY_READ;
+ if (file->f_mode & FMODE_WRITE)
+ perm |= MAY_WRITE;
+ /*
+ * hooks: /n/, see "layering violations".
+ */
+ ret = devcgroup_inode_permission(bdev->bd_inode, perm);
if (ret != 0)
return ret;
diff --git a/fs/buffer.c b/fs/buffer.c
index a073f3f4f01..0f51c0f7c26 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -821,7 +821,7 @@ static int fsync_buffers_list(spinlock_t *lock, struct list_head *list)
* contents - it is a noop if I/O is still in
* flight on potentially older contents.
*/
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block(SWRITE_SYNC, 1, &bh);
brelse(bh);
spin_lock(lock);
}
@@ -2940,16 +2940,19 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[])
for (i = 0; i < nr; i++) {
struct buffer_head *bh = bhs[i];
- if (rw == SWRITE)
+ if (rw == SWRITE || rw == SWRITE_SYNC)
lock_buffer(bh);
else if (test_set_buffer_locked(bh))
continue;
- if (rw == WRITE || rw == SWRITE) {
+ if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) {
if (test_clear_buffer_dirty(bh)) {
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
- submit_bh(WRITE, bh);
+ if (rw == SWRITE_SYNC)
+ submit_bh(WRITE_SYNC, bh);
+ else
+ submit_bh(WRITE, bh);
continue;
}
} else {
@@ -2978,7 +2981,7 @@ int sync_dirty_buffer(struct buffer_head *bh)
if (test_clear_buffer_dirty(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
diff --git a/fs/dcache.c b/fs/dcache.c
index 3ee588d5f58..6068c25b393 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -17,6 +17,7 @@
#include <linux/syscalls.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/fsnotify.h>
#include <linux/slab.h>
@@ -106,9 +107,10 @@ static void dentry_lru_remove(struct dentry *dentry)
/*
* Release the dentry's inode, using the filesystem
* d_iput() operation if defined.
- * Called with dcache_lock and per dentry lock held, drops both.
*/
static void dentry_iput(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct inode *inode = dentry->d_inode;
if (inode) {
@@ -132,12 +134,13 @@ static void dentry_iput(struct dentry * dentry)
* d_kill - kill dentry and return parent
* @dentry: dentry to kill
*
- * Called with dcache_lock and d_lock, releases both. The dentry must
- * already be unhashed and removed from the LRU.
+ * The dentry must already be unhashed and removed from the LRU.
*
* If this is the root of the dentry tree, return NULL.
*/
static struct dentry *d_kill(struct dentry *dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct dentry *parent;
@@ -383,11 +386,11 @@ restart:
* Try to prune ancestors as well. This is necessary to prevent
* quadratic behavior of shrink_dcache_parent(), but is also expected
* to be beneficial in reducing dentry cache fragmentation.
- *
- * Called with dcache_lock, drops it and then regains.
- * Called with dentry->d_lock held, drops it.
*/
static void prune_one_dentry(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
+ __acquires(dcache_lock)
{
__d_drop(dentry);
dentry = d_kill(dentry);
@@ -1604,10 +1607,9 @@ static int d_isparent(struct dentry *p1, struct dentry *p2)
*
* Note: If ever the locking in lock_rename() changes, then please
* remember to update this too...
- *
- * On return, dcache_lock will have been unlocked.
*/
static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias)
+ __releases(dcache_lock)
{
struct mutex *m1 = NULL, *m2 = NULL;
struct dentry *ret;
@@ -1743,11 +1745,9 @@ out_nolock:
shouldnt_be_hashed:
spin_unlock(&dcache_lock);
BUG();
- goto shouldnt_be_hashed;
}
-static int prepend(char **buffer, int *buflen, const char *str,
- int namelen)
+static int prepend(char **buffer, int *buflen, const char *str, int namelen)
{
*buflen -= namelen;
if (*buflen < 0)
@@ -1757,8 +1757,13 @@ static int prepend(char **buffer, int *buflen, const char *str,
return 0;
}
+static int prepend_name(char **buffer, int *buflen, struct qstr *name)
+{
+ return prepend(buffer, buflen, name->name, name->len);
+}
+
/**
- * d_path - return the path of a dentry
+ * __d_path - return the path of a dentry
* @path: the dentry/vfsmount to report
* @root: root vfsmnt/dentry (may be modified by this function)
* @buffer: buffer to return value in
@@ -1779,9 +1784,10 @@ char *__d_path(const struct path *path, struct path *root,
{
struct dentry *dentry = path->dentry;
struct vfsmount *vfsmnt = path->mnt;
- char * end = buffer+buflen;
- char * retval;
+ char *end = buffer + buflen;
+ char *retval;
+ spin_lock(&vfsmount_lock);
prepend(&end, &buflen, "\0", 1);
if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
(prepend(&end, &buflen, " (deleted)", 10) != 0))
@@ -1800,38 +1806,37 @@ char *__d_path(const struct path *path, struct path *root,
break;
if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) {
/* Global root? */
- spin_lock(&vfsmount_lock);
if (vfsmnt->mnt_parent == vfsmnt) {
- spin_unlock(&vfsmount_lock);
goto global_root;
}
dentry = vfsmnt->mnt_mountpoint;
vfsmnt = vfsmnt->mnt_parent;
- spin_unlock(&vfsmount_lock);
continue;
}
parent = dentry->d_parent;
prefetch(parent);
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
retval = end;
dentry = parent;
}
+out:
+ spin_unlock(&vfsmount_lock);
return retval;
global_root:
retval += 1; /* hit the slash */
- if (prepend(&retval, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0)
+ if (prepend_name(&retval, &buflen, &dentry->d_name) != 0)
goto Elong;
root->mnt = vfsmnt;
root->dentry = dentry;
- return retval;
+ goto out;
+
Elong:
- return ERR_PTR(-ENAMETOOLONG);
+ retval = ERR_PTR(-ENAMETOOLONG);
+ goto out;
}
/**
@@ -1845,9 +1850,9 @@ Elong:
*
* Returns the buffer or an error code if the path was too long.
*
- * "buflen" should be positive. Caller holds the dcache_lock.
+ * "buflen" should be positive.
*/
-char *d_path(struct path *path, char *buf, int buflen)
+char *d_path(const struct path *path, char *buf, int buflen)
{
char *res;
struct path root;
@@ -1915,16 +1920,11 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen)
retval = end-1;
*retval = '/';
- for (;;) {
- struct dentry *parent;
- if (IS_ROOT(dentry))
- break;
+ while (!IS_ROOT(dentry)) {
+ struct dentry *parent = dentry->d_parent;
- parent = dentry->d_parent;
prefetch(parent);
-
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
@@ -1975,7 +1975,7 @@ asmlinkage long sys_getcwd(char __user *buf, unsigned long size)
error = -ENOENT;
/* Has the current directory has been unlinked? */
spin_lock(&dcache_lock);
- if (pwd.dentry->d_parent == pwd.dentry || !d_unhashed(pwd.dentry)) {
+ if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) {
unsigned long len;
struct path tmp = root;
char * cwd;
diff --git a/fs/exec.c b/fs/exec.c
index 9448f1b50b4..da94a6f05df 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -26,7 +26,6 @@
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/smp_lock.h>
@@ -61,6 +60,11 @@
#include <linux/kmod.h>
#endif
+#ifdef __alpha__
+/* for /sbin/loader handling in search_binary_handler() */
+#include <linux/a.out.h>
+#endif
+
int core_uses_pid;
char core_pattern[CORENAME_MAX_SIZE] = "core";
int suid_dumpable = 0;
@@ -1155,7 +1159,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
{
int try,retval;
struct linux_binfmt *fmt;
-#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT)
+#ifdef __alpha__
/* handle /sbin/loader.. */
{
struct exec * eh = (struct exec *) bprm->buf;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9ecb92f6854..9ff7b1c0423 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -855,7 +855,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
*/
/* Update group descriptor block for new group */
- gdp = (struct ext4_group_desc *)primary->b_data + gdb_off;
+ gdp = (struct ext4_group_desc *)((char *)primary->b_data +
+ gdb_off * EXT4_DESC_SIZE(sb));
ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 43e99513334..3141690558c 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -591,7 +591,7 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages);
fc->minor = arg->minor;
fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
- fc->max_write = min_t(unsigned, 4096, fc->max_write);
+ fc->max_write = max_t(unsigned, 4096, fc->max_write);
fc->conn_init = 1;
}
fuse_put_request(fc, req);
@@ -667,7 +667,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
fc->flags = d.flags;
fc->user_id = d.user_id;
fc->group_id = d.group_id;
- fc->max_read = min_t(unsigned, 4096, d.max_read);
+ fc->max_read = max_t(unsigned, 4096, d.max_read);
/* Used by get_root_inode() */
sb->s_fs_info = fc;
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index c19184f2e70..bec76b1c2bb 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -246,15 +246,11 @@ static void find_metapath(const struct gfs2_sbd *sdp, u64 block,
}
-static inline unsigned int zero_metapath_length(const struct metapath *mp,
- unsigned height)
+static inline unsigned int metapath_branch_start(const struct metapath *mp)
{
- unsigned int i;
- for (i = 0; i < height - 1; i++) {
- if (mp->mp_list[i] != 0)
- return i;
- }
- return height;
+ if (mp->mp_list[0] == 0)
+ return 2;
+ return 1;
}
/**
@@ -436,7 +432,7 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock,
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct buffer_head *dibh = mp->mp_bh[0];
u64 bn, dblock = 0;
- unsigned n, i, blks, alloced = 0, iblks = 0, zmpl = 0;
+ unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0;
unsigned dblks = 0;
unsigned ptrs_per_blk;
const unsigned end_of_metadata = height - 1;
@@ -471,9 +467,8 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock,
/* Building up tree height */
state = ALLOC_GROW_HEIGHT;
iblks = height - ip->i_height;
- zmpl = zero_metapath_length(mp, height);
- iblks -= zmpl;
- iblks += height;
+ branch_start = metapath_branch_start(mp);
+ iblks += (height - branch_start);
}
}
@@ -509,13 +504,13 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock,
sizeof(struct gfs2_meta_header));
*ptr = zero_bn;
state = ALLOC_GROW_DEPTH;
- for(i = zmpl; i < height; i++) {
+ for(i = branch_start; i < height; i++) {
if (mp->mp_bh[i] == NULL)
break;
brelse(mp->mp_bh[i]);
mp->mp_bh[i] = NULL;
}
- i = zmpl;
+ i = branch_start;
}
if (n == 0)
break;
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 6387523a315..3401628d742 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -195,7 +195,7 @@ ulong_aligned:
depending on architecture. I've experimented with several ways
of writing this section such as using an else before the goto
but this one seems to be the fastest. */
- while ((unsigned char *)plong < end - 1) {
+ while ((unsigned char *)plong < end - sizeof(unsigned long)) {
prefetch(plong + 1);
if (((*plong) & LBITMASK) != lskipval)
break;
diff --git a/fs/locks.c b/fs/locks.c
index 11dbf08651b..dce8c747371 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -561,9 +561,6 @@ static void locks_insert_lock(struct file_lock **pos, struct file_lock *fl)
/* insert into file's list */
fl->fl_next = *pos;
*pos = fl;
-
- if (fl->fl_ops && fl->fl_ops->fl_insert)
- fl->fl_ops->fl_insert(fl);
}
/*
@@ -586,9 +583,6 @@ static void locks_delete_lock(struct file_lock **thisfl_p)
fl->fl_fasync = NULL;
}
- if (fl->fl_ops && fl->fl_ops->fl_remove)
- fl->fl_ops->fl_remove(fl);
-
if (fl->fl_nspid) {
put_pid(fl->fl_nspid);
fl->fl_nspid = NULL;
diff --git a/fs/namei.c b/fs/namei.c
index c7e43536c49..01e67dddcc3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -581,15 +581,13 @@ static __always_inline int link_path_walk(const char *name, struct nameidata *nd
int result;
/* make sure the stuff we saved doesn't go away */
- dget(save.dentry);
- mntget(save.mnt);
+ path_get(&save);
result = __link_path_walk(name, nd);
if (result == -ESTALE) {
/* nd->path had been dropped */
nd->path = save;
- dget(nd->path.dentry);
- mntget(nd->path.mnt);
+ path_get(&nd->path);
nd->flags |= LOOKUP_REVAL;
result = __link_path_walk(name, nd);
}
@@ -1216,8 +1214,9 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
nd->flags = flags;
nd->depth = 0;
- nd->path.mnt = mntget(mnt);
- nd->path.dentry = dget(dentry);
+ nd->path.dentry = dentry;
+ nd->path.mnt = mnt;
+ path_get(&nd->path);
retval = path_walk(name, nd);
if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
@@ -2857,16 +2856,17 @@ int generic_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct nameidata nd;
void *cookie;
+ int res;
nd.depth = 0;
cookie = dentry->d_inode->i_op->follow_link(dentry, &nd);
- if (!IS_ERR(cookie)) {
- int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
- if (dentry->d_inode->i_op->put_link)
- dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
- cookie = ERR_PTR(res);
- }
- return PTR_ERR(cookie);
+ if (IS_ERR(cookie))
+ return PTR_ERR(cookie);
+
+ res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
+ if (dentry->d_inode->i_op->put_link)
+ dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
+ return res;
}
int vfs_follow_link(struct nameidata *nd, const char *link)
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 49c7cd0502c..779d2eb649c 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -130,10 +130,11 @@ static int xdr_decode_fhstatus3(struct rpc_rqst *req, __be32 *p,
struct mnt_fhstatus *res)
{
struct nfs_fh *fh = res->fh;
+ unsigned size;
if ((res->status = ntohl(*p++)) == 0) {
- int size = ntohl(*p++);
- if (size <= NFS3_FHSIZE) {
+ size = ntohl(*p++);
+ if (size <= NFS3_FHSIZE && size != 0) {
fh->size = size;
memcpy(fh->data, p, size);
} else
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 2a4a024a4e7..614efeed543 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1216,8 +1216,6 @@ static int nfs_validate_mount_data(void *options,
{
struct nfs_mount_data *data = (struct nfs_mount_data *)options;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
@@ -1251,13 +1249,13 @@ static int nfs_validate_mount_data(void *options,
case 5:
memset(data->context, 0, sizeof(data->context));
case 6:
- if (data->flags & NFS_MOUNT_VER3)
+ if (data->flags & NFS_MOUNT_VER3) {
+ if (data->root.size > NFS3_FHSIZE || data->root.size == 0)
+ goto out_invalid_fh;
mntfh->size = data->root.size;
- else
+ } else
mntfh->size = NFS2_FHSIZE;
- if (mntfh->size > sizeof(mntfh->data))
- goto out_invalid_fh;
memcpy(mntfh->data, data->root.data, mntfh->size);
if (mntfh->size < sizeof(mntfh->data))
@@ -1585,24 +1583,29 @@ static int nfs_get_sb(struct file_system_type *fs_type,
{
struct nfs_server *server = NULL;
struct super_block *s;
- struct nfs_fh mntfh;
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
- security_init_mnt_opts(&data.lsm_opts);
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name);
+ error = nfs_validate_mount_data(raw_data, data, mntfh, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs_create_server(&data, &mntfh);
+ server = nfs_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
@@ -1630,16 +1633,16 @@ static int nfs_get_sb(struct file_system_type *fs_type,
if (!s->s_root) {
/* initial superblock/root creation */
- nfs_fill_super(s, &data);
+ nfs_fill_super(s, data);
}
- mntroot = nfs_get_root(s, &mntfh);
+ mntroot = nfs_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
@@ -1649,9 +1652,12 @@ static int nfs_get_sb(struct file_system_type *fs_type,
error = 0;
out:
- kfree(data.nfs_server.hostname);
- kfree(data.mount_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->nfs_server.hostname);
+ kfree(data->mount_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_err_nosb:
@@ -1800,8 +1806,6 @@ static int nfs4_validate_mount_data(void *options,
struct nfs4_mount_data *data = (struct nfs4_mount_data *)options;
char *c;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
@@ -1959,26 +1963,31 @@ out_no_client_address:
static int nfs4_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
{
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
struct super_block *s;
struct nfs_server *server;
- struct nfs_fh mntfh;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
- security_init_mnt_opts(&data.lsm_opts);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
+
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs4_validate_mount_data(raw_data, &data, dev_name);
+ error = nfs4_validate_mount_data(raw_data, data, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs4_create_server(&data, &mntfh);
+ server = nfs4_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
@@ -2009,13 +2018,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
nfs4_fill_super(s);
}
- mntroot = nfs4_get_root(s, &mntfh);
+ mntroot = nfs4_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
@@ -2025,10 +2034,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
error = 0;
out:
- kfree(data.client_address);
- kfree(data.nfs_server.export_path);
- kfree(data.nfs_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->client_address);
+ kfree(data->nfs_server.export_path);
+ kfree(data->nfs_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_free:
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 6d8ace3e325..f333848fd3b 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -739,12 +739,13 @@ int nfs_updatepage(struct file *file, struct page *page,
}
status = nfs_writepage_setup(ctx, page, offset, count);
- __set_page_dirty_nobuffers(page);
+ if (status < 0)
+ nfs_set_pageerror(page);
+ else
+ __set_page_dirty_nobuffers(page);
dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n",
status, (long long)i_size_read(inode));
- if (status < 0)
- nfs_set_pageerror(page);
return status;
}
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index cf9401e8cd0..cfdb08b484e 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -21,7 +21,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/sysctl.h>
#include <linux/configfs.h>
#include "tcp.h"
@@ -36,65 +35,6 @@
* cluster references throughout where nodes are looked up */
struct o2nm_cluster *o2nm_single_cluster = NULL;
-#define OCFS2_MAX_HB_CTL_PATH 256
-static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
-
-static ctl_table ocfs2_nm_table[] = {
- {
- .ctl_name = 1,
- .procname = "hb_ctl_path",
- .data = ocfs2_hb_ctl_path,
- .maxlen = OCFS2_MAX_HB_CTL_PATH,
- .mode = 0644,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string,
- },
- { .ctl_name = 0 }
-};
-
-static ctl_table ocfs2_mod_table[] = {
- {
- .ctl_name = FS_OCFS2_NM,
- .procname = "nm",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_nm_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_kern_table[] = {
- {
- .ctl_name = FS_OCFS2,
- .procname = "ocfs2",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_mod_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_root_table[] = {
- {
- .ctl_name = CTL_FS,
- .procname = "fs",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_kern_table
- },
- { .ctl_name = 0 }
-};
-
-static struct ctl_table_header *ocfs2_table_header = NULL;
-
-const char *o2nm_get_hb_ctl_path(void)
-{
- return ocfs2_hb_ctl_path;
-}
-EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path);
struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
{
@@ -941,9 +881,6 @@ void o2nm_undepend_this_node(void)
static void __exit exit_o2nm(void)
{
- if (ocfs2_table_header)
- unregister_sysctl_table(ocfs2_table_header);
-
/* XXX sync with hb callbacks and shut down hb? */
o2net_unregister_hb_callbacks();
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
@@ -964,16 +901,9 @@ static int __init init_o2nm(void)
if (ret)
goto out;
- ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
- if (!ocfs2_table_header) {
- printk(KERN_ERR "nodemanager: unable to register sysctl\n");
- ret = -ENOMEM; /* or something. */
- goto out_o2net;
- }
-
ret = o2net_register_hb_callbacks();
if (ret)
- goto out_sysctl;
+ goto out_o2net;
config_group_init(&o2nm_cluster_group.cs_subsys.su_group);
mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex);
@@ -990,8 +920,6 @@ static int __init init_o2nm(void)
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
out_callbacks:
o2net_unregister_hb_callbacks();
-out_sysctl:
- unregister_sysctl_table(ocfs2_table_header);
out_o2net:
o2net_exit();
out:
diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h
index 7c860361b8d..c992ea0da4a 100644
--- a/fs/ocfs2/cluster/nodemanager.h
+++ b/fs/ocfs2/cluster/nodemanager.h
@@ -33,10 +33,6 @@
#include <linux/configfs.h>
#include <linux/rbtree.h>
-#define FS_OCFS2_NM 1
-
-const char *o2nm_get_hb_ctl_path(void);
-
struct o2nm_node {
spinlock_t nd_lock;
struct config_item nd_item;
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index bbd1667aa7d..fcd120f1493 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -317,8 +317,7 @@ out:
return rc;
}
-static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
struct dlm_ctxt *dlm = conn->cc_lockspace;
struct o2dlm_private *priv = conn->cc_private;
@@ -333,43 +332,6 @@ static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn,
return 0;
}
-static void o2hb_stop(const char *group)
-{
- int ret;
- char *argv[5], *envp[3];
-
- argv[0] = (char *)o2nm_get_hb_ctl_path();
- argv[1] = "-K";
- argv[2] = "-u";
- argv[3] = (char *)group;
- argv[4] = NULL;
-
- mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]);
-
- /* minimal command environment taken from cpu_run_sbin_hotplug */
- envp[0] = "HOME=/";
- envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
- envp[2] = NULL;
-
- ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
- if (ret < 0)
- mlog_errno(ret);
-}
-
-/*
- * Hangup is a hack for tools compatibility. Older ocfs2-tools software
- * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This
- * happens regardless of whether the DLM got started, so we can't do it
- * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into
- * the glue and provide a "hangup" API for super.c to call.
- *
- * Other stacks will eventually provide a NULL ->hangup() pointer.
- */
-static void o2cb_cluster_hangup(const char *group, int grouplen)
-{
- o2hb_stop(group);
-}
-
static int o2cb_cluster_this_node(unsigned int *node)
{
int node_num;
@@ -388,7 +350,6 @@ static int o2cb_cluster_this_node(unsigned int *node)
static struct ocfs2_stack_operations o2cb_stack_ops = {
.connect = o2cb_cluster_connect,
.disconnect = o2cb_cluster_disconnect,
- .hangup = o2cb_cluster_hangup,
.this_node = o2cb_cluster_this_node,
.dlm_lock = o2cb_dlm_lock,
.dlm_unlock = o2cb_dlm_unlock,
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 6b97d11f6bf..c021280dd46 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -816,8 +816,7 @@ out:
return rc;
}
-static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
dlm_release_lockspace(conn->cc_lockspace, 2);
conn->cc_lockspace = NULL;
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 119f60cea9c..10e149ae5e3 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -26,6 +26,7 @@
#include <linux/fs.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/sysctl.h>
#include "ocfs2_fs.h"
@@ -33,11 +34,13 @@
#define OCFS2_STACK_PLUGIN_O2CB "o2cb"
#define OCFS2_STACK_PLUGIN_USER "user"
+#define OCFS2_MAX_HB_CTL_PATH 256
static struct ocfs2_locking_protocol *lproto;
static DEFINE_SPINLOCK(ocfs2_stack_lock);
static LIST_HEAD(ocfs2_stack_list);
static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1];
+static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
/*
* The stack currently in use. If not null, active_stack->sp_count > 0,
@@ -349,7 +352,7 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn,
BUG_ON(conn == NULL);
- ret = active_stack->sp_ops->disconnect(conn, hangup_pending);
+ ret = active_stack->sp_ops->disconnect(conn);
/* XXX Should we free it anyway? */
if (!ret) {
@@ -362,13 +365,48 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn,
}
EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect);
+/*
+ * Leave the group for this filesystem. This is executed by a userspace
+ * program (stored in ocfs2_hb_ctl_path).
+ */
+static void ocfs2_leave_group(const char *group)
+{
+ int ret;
+ char *argv[5], *envp[3];
+
+ argv[0] = ocfs2_hb_ctl_path;
+ argv[1] = "-K";
+ argv[2] = "-u";
+ argv[3] = (char *)group;
+ argv[4] = NULL;
+
+ /* minimal command environment taken from cpu_run_sbin_hotplug */
+ envp[0] = "HOME=/";
+ envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+ envp[2] = NULL;
+
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "ocfs2: Error %d running user helper "
+ "\"%s %s %s %s\"\n",
+ ret, argv[0], argv[1], argv[2], argv[3]);
+ }
+}
+
+/*
+ * Hangup is a required post-umount. ocfs2-tools software expects the
+ * filesystem to call "ocfs2_hb_ctl" during unmount. This happens
+ * regardless of whether the DLM got started, so we can't do it
+ * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does
+ * the actual work.
+ */
void ocfs2_cluster_hangup(const char *group, int grouplen)
{
BUG_ON(group == NULL);
BUG_ON(group[grouplen] != '\0');
- if (active_stack->sp_ops->hangup)
- active_stack->sp_ops->hangup(group, grouplen);
+ ocfs2_leave_group(group);
/* cluster_disconnect() was called with hangup_pending==1 */
ocfs2_stack_driver_put();
@@ -548,10 +586,83 @@ error:
return ret;
}
+/*
+ * Sysctl bits
+ *
+ * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't
+ * make as much sense in a multiple cluster stack world, but it's safer
+ * and easier to preserve the name.
+ */
+
+#define FS_OCFS2_NM 1
+
+static ctl_table ocfs2_nm_table[] = {
+ {
+ .ctl_name = 1,
+ .procname = "hb_ctl_path",
+ .data = ocfs2_hb_ctl_path,
+ .maxlen = OCFS2_MAX_HB_CTL_PATH,
+ .mode = 0644,
+ .proc_handler = &proc_dostring,
+ .strategy = &sysctl_string,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table ocfs2_mod_table[] = {
+ {
+ .ctl_name = FS_OCFS2_NM,
+ .procname = "nm",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_nm_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_kern_table[] = {
+ {
+ .ctl_name = FS_OCFS2,
+ .procname = "ocfs2",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_mod_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_root_table[] = {
+ {
+ .ctl_name = CTL_FS,
+ .procname = "fs",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_kern_table
+ },
+ { .ctl_name = 0 }
+};
+
+static struct ctl_table_header *ocfs2_table_header = NULL;
+
+
+/*
+ * Initialization
+ */
+
static int __init ocfs2_stack_glue_init(void)
{
strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB);
+ ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
+ if (!ocfs2_table_header) {
+ printk(KERN_ERR
+ "ocfs2 stack glue: unable to register sysctl\n");
+ return -ENOMEM; /* or something. */
+ }
+
return ocfs2_sysfs_init();
}
@@ -559,6 +670,8 @@ static void __exit ocfs2_stack_glue_exit(void)
{
lproto = NULL;
ocfs2_sysfs_exit();
+ if (ocfs2_table_header)
+ unregister_sysctl_table(ocfs2_table_header);
}
MODULE_AUTHOR("Oracle");
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index 005e4f170e0..db56281dd1b 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -134,22 +134,10 @@ struct ocfs2_stack_operations {
* be freed. Thus, a stack must not return from ->disconnect()
* until it will no longer reference the conn pointer.
*
- * If hangup_pending is zero, ocfs2_cluster_disconnect() will also
- * be dropping the reference on the module.
+ * Once this call returns, the stack glue will be dropping this
+ * connection's reference on the module.
*/
- int (*disconnect)(struct ocfs2_cluster_connection *conn,
- int hangup_pending);
-
- /*
- * ocfs2_cluster_hangup() exists for compatibility with older
- * ocfs2 tools. Only the classic stack really needs it. As such
- * ->hangup() is not required of all stacks. See the comment by
- * ocfs2_cluster_hangup() for more details.
- *
- * Note that ocfs2_cluster_hangup() can only be called if
- * hangup_pending was passed to ocfs2_cluster_disconnect().
- */
- void (*hangup)(const char *group, int grouplen);
+ int (*disconnect)(struct ocfs2_cluster_connection *conn);
/*
* ->this_node() returns the cluster's unique identifier for the
@@ -258,4 +246,5 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto)
/* Used by stack plugins */
int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin);
void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin);
+
#endif /* STACKGLUE_H */
diff --git a/fs/pipe.c b/fs/pipe.c
index ec228bc9f88..700f4e0d957 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1003,8 +1003,7 @@ struct file *create_write_pipe(void)
void free_write_pipe(struct file *f)
{
free_pipe_info(f->f_dentry->d_inode);
- dput(f->f_path.dentry);
- mntput(f->f_path.mnt);
+ path_put(&f->f_path);
put_filp(f);
}
@@ -1015,8 +1014,8 @@ struct file *create_read_pipe(struct file *wrf)
return ERR_PTR(-ENFILE);
/* Grab pipe from the writer */
- f->f_path.mnt = mntget(wrf->f_path.mnt);
- f->f_path.dentry = dget(wrf->f_path.dentry);
+ f->f_path = wrf->f_path;
+ path_get(&wrf->f_path);
f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping;
f->f_pos = 0;
@@ -1068,8 +1067,7 @@ int do_pipe(int *fd)
err_fdr:
put_unused_fd(fdr);
err_read_pipe:
- dput(fr->f_dentry);
- mntput(fr->f_vfsmnt);
+ path_put(&fr->f_path);
put_filp(fr);
err_write_pipe:
free_write_pipe(fw);
diff --git a/fs/select.c b/fs/select.c
index 8dda969614a..da0e88201c3 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -249,7 +249,6 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
retval++;
}
}
- cond_resched();
}
if (res_in)
*rinp = res_in;
@@ -257,6 +256,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
*routp = res_out;
if (res_ex)
*rexp = res_ex;
+ cond_resched();
}
wait = NULL;
if (retval || !*timeout || signal_pending(current))
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 7a5f69be6ac..44cc702f96c 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -682,38 +682,26 @@ static int udf_vrs(struct super_block *sb, int silent)
/*
* Check whether there is an anchor block in the given block
*/
-static int udf_check_anchor_block(struct super_block *sb, sector_t block,
- bool varconv)
+static int udf_check_anchor_block(struct super_block *sb, sector_t block)
{
- struct buffer_head *bh = NULL;
- tag *t;
+ struct buffer_head *bh;
uint16_t ident;
- uint32_t location;
- if (varconv) {
- if (udf_fixed_to_variable(block) >=
- sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
- return 0;
- bh = sb_bread(sb, udf_fixed_to_variable(block));
- }
- else
- bh = sb_bread(sb, block);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_VARCONV) &&
+ udf_fixed_to_variable(block) >=
+ sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
+ return 0;
+ bh = udf_read_tagged(sb, block, block, &ident);
if (!bh)
return 0;
-
- t = (tag *)bh->b_data;
- ident = le16_to_cpu(t->tagIdent);
- location = le32_to_cpu(t->tagLocation);
brelse(bh);
- if (ident != TAG_IDENT_AVDP)
- return 0;
- return location == block;
+
+ return ident == TAG_IDENT_AVDP;
}
/* Search for an anchor volume descriptor pointer */
-static sector_t udf_scan_anchors(struct super_block *sb, bool varconv,
- sector_t lastblock)
+static sector_t udf_scan_anchors(struct super_block *sb, sector_t lastblock)
{
sector_t last[6];
int i;
@@ -739,7 +727,7 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv,
sb->s_blocksize_bits)
continue;
- if (udf_check_anchor_block(sb, last[i], varconv)) {
+ if (udf_check_anchor_block(sb, last[i])) {
sbi->s_anchor[0] = last[i];
sbi->s_anchor[1] = last[i] - 256;
return last[i];
@@ -748,17 +736,17 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv,
if (last[i] < 256)
continue;
- if (udf_check_anchor_block(sb, last[i] - 256, varconv)) {
+ if (udf_check_anchor_block(sb, last[i] - 256)) {
sbi->s_anchor[1] = last[i] - 256;
return last[i];
}
}
- if (udf_check_anchor_block(sb, sbi->s_session + 256, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 256)) {
sbi->s_anchor[0] = sbi->s_session + 256;
return last[0];
}
- if (udf_check_anchor_block(sb, sbi->s_session + 512, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 512)) {
sbi->s_anchor[0] = sbi->s_session + 512;
return last[0];
}
@@ -780,23 +768,24 @@ static void udf_find_anchor(struct super_block *sb)
int i;
struct udf_sb_info *sbi = UDF_SB(sb);
- lastblock = udf_scan_anchors(sb, 0, sbi->s_last_block);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
if (lastblock)
goto check_anchor;
/* No anchor found? Try VARCONV conversion of block numbers */
+ UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
/* Firstly, we try to not convert number of the last block */
- lastblock = udf_scan_anchors(sb, 1,
+ lastblock = udf_scan_anchors(sb,
udf_variable_to_fixed(sbi->s_last_block));
- if (lastblock) {
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ if (lastblock)
goto check_anchor;
- }
/* Secondly, we try with converted number of the last block */
- lastblock = udf_scan_anchors(sb, 1, sbi->s_last_block);
- if (lastblock)
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
+ if (!lastblock) {
+ /* VARCONV didn't help. Clear it. */
+ UDF_CLEAR_FLAG(sb, UDF_FLAG_VARCONV);
+ }
check_anchor:
/*
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index 8fa9c2d7091..8ec865de5f1 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -16,7 +16,7 @@
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
-#define UDFFS_DEBUG
+#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
#define udf_debug(f, a...) \
diff --git a/fs/utimes.c b/fs/utimes.c
index af059d5cb48..b6b664e7145 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -40,14 +40,9 @@ asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times)
#endif
-static bool nsec_special(long nsec)
-{
- return nsec == UTIME_OMIT || nsec == UTIME_NOW;
-}
-
static bool nsec_valid(long nsec)
{
- if (nsec_special(nsec))
+ if (nsec == UTIME_OMIT || nsec == UTIME_NOW)
return true;
return nsec >= 0 && nsec <= 999999999;
@@ -102,7 +97,11 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
if (error)
goto dput_and_out;
- /* Don't worry, the checks are done in inode_change_ok() */
+ if (times && times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_NOW)
+ times = NULL;
+
+ /* In most cases, the checks are done in inode_change_ok() */
newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
if (times) {
error = -EPERM;
@@ -124,28 +123,34 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
newattrs.ia_valid |= ATTR_MTIME_SET;
}
- }
- /*
- * If times is NULL or both times are either UTIME_OMIT or
- * UTIME_NOW, then need to check permissions, because
- * inode_change_ok() won't do it.
- */
- if (!times || (nsec_special(times[0].tv_nsec) &&
- nsec_special(times[1].tv_nsec))) {
+ /*
+ * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT
+ * cases, we need to make an extra check that is not done by
+ * inode_change_ok().
+ */
+ if (((times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_OMIT)
+ ||
+ (times[0].tv_nsec == UTIME_OMIT &&
+ times[1].tv_nsec == UTIME_NOW))
+ && !is_owner_or_cap(inode))
+ goto mnt_drop_write_and_out;
+ } else {
+
+ /*
+ * If times is NULL (or both times are UTIME_NOW),
+ * then we need to check permissions, because
+ * inode_change_ok() won't do it.
+ */
error = -EACCES;
if (IS_IMMUTABLE(inode))
goto mnt_drop_write_and_out;
if (!is_owner_or_cap(inode)) {
- if (f) {
- if (!(f->f_mode & FMODE_WRITE))
- goto mnt_drop_write_and_out;
- } else {
- error = vfs_permission(&nd, MAY_WRITE);
- if (error)
- goto mnt_drop_write_and_out;
- }
+ error = permission(inode, MAY_WRITE, NULL);
+ if (error)
+ goto mnt_drop_write_and_out;
}
}
mutex_lock(&inode->i_mutex);
@@ -169,14 +174,6 @@ asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __
if (utimes) {
if (copy_from_user(&tstimes, utimes, sizeof(tstimes)))
return -EFAULT;
- if ((tstimes[0].tv_nsec == UTIME_OMIT ||
- tstimes[0].tv_nsec == UTIME_NOW) &&
- tstimes[0].tv_sec != 0)
- return -EINVAL;
- if ((tstimes[1].tv_nsec == UTIME_OMIT ||
- tstimes[1].tv_nsec == UTIME_NOW) &&
- tstimes[1].tv_sec != 0)
- return -EINVAL;
/* Nothing to do, we must not even check the path. */
if (tstimes[0].tv_nsec == UTIME_OMIT &&
diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h
index 525b4f6a7ac..acf55b48347 100644
--- a/include/asm-alpha/core_mcpcia.h
+++ b/include/asm-alpha/core_mcpcia.h
@@ -261,7 +261,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
}
#endif
-static inline int __mcpcia_is_mmio(unsigned long addr)
+extern inline int __mcpcia_is_mmio(unsigned long addr)
{
return (addr & 0x80000000UL) == 0;
}
diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h
index 90e6b5d6c21..46bfff58f67 100644
--- a/include/asm-alpha/core_t2.h
+++ b/include/asm-alpha/core_t2.h
@@ -356,13 +356,13 @@ struct el_t2_frame_corrected {
#define vip volatile int *
#define vuip volatile unsigned int *
-static inline u8 t2_inb(unsigned long addr)
+extern inline u8 t2_inb(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x00);
return __kernel_extbl(result, addr & 3);
}
-static inline void t2_outb(u8 b, unsigned long addr)
+extern inline void t2_outb(u8 b, unsigned long addr)
{
unsigned long w;
@@ -371,13 +371,13 @@ static inline void t2_outb(u8 b, unsigned long addr)
mb();
}
-static inline u16 t2_inw(unsigned long addr)
+extern inline u16 t2_inw(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x08);
return __kernel_extwl(result, addr & 3);
}
-static inline void t2_outw(u16 b, unsigned long addr)
+extern inline void t2_outw(u16 b, unsigned long addr)
{
unsigned long w;
@@ -386,12 +386,12 @@ static inline void t2_outw(u16 b, unsigned long addr)
mb();
}
-static inline u32 t2_inl(unsigned long addr)
+extern inline u32 t2_inl(unsigned long addr)
{
return *(vuip) ((addr << 5) + T2_IO + 0x18);
}
-static inline void t2_outl(u32 b, unsigned long addr)
+extern inline void t2_outl(u32 b, unsigned long addr)
{
*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
mb();
@@ -435,7 +435,7 @@ static inline void t2_outl(u32 b, unsigned long addr)
set_hae(msb); \
}
-static DEFINE_SPINLOCK(t2_hae_lock);
+extern spinlock_t t2_hae_lock;
/*
* NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h
index 38f18cf18c9..e971ab000f9 100644
--- a/include/asm-alpha/io.h
+++ b/include/asm-alpha/io.h
@@ -35,7 +35,7 @@
* register not being up-to-date with respect to the hardware
* value.
*/
-static inline void __set_hae(unsigned long new_hae)
+extern inline void __set_hae(unsigned long new_hae)
{
unsigned long flags;
local_irq_save(flags);
@@ -49,7 +49,7 @@ static inline void __set_hae(unsigned long new_hae)
local_irq_restore(flags);
}
-static inline void set_hae(unsigned long new_hae)
+extern inline void set_hae(unsigned long new_hae)
{
if (new_hae != alpha_mv.hae_cache)
__set_hae(new_hae);
@@ -176,7 +176,7 @@ REMAP2(u64, writeq, volatile)
#undef REMAP1
#undef REMAP2
-static inline void __iomem *generic_ioportmap(unsigned long a)
+extern inline void __iomem *generic_ioportmap(unsigned long a)
{
return alpha_mv.mv_ioportmap(a);
}
diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h
index 6a5be1f7deb..86c08a02d23 100644
--- a/include/asm-alpha/mmu_context.h
+++ b/include/asm-alpha/mmu_context.h
@@ -23,7 +23,7 @@
#endif
-extern inline unsigned long
+static inline unsigned long
__reload_thread(struct pcb_struct *pcb)
{
register unsigned long a0 __asm__("$16");
@@ -114,7 +114,7 @@ extern unsigned long last_asn;
#define __MMU_EXTERN_INLINE
#endif
-static inline unsigned long
+extern inline unsigned long
__get_new_mm_context(struct mm_struct *mm, long cpu)
{
unsigned long asn = cpu_last_asn(cpu);
@@ -226,7 +226,7 @@ ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
# endif
#endif
-extern inline int
+static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int i;
diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h
index 48348fe34c1..3495e8e00d7 100644
--- a/include/asm-alpha/percpu.h
+++ b/include/asm-alpha/percpu.h
@@ -1,6 +1,78 @@
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+#include <linux/compiler.h>
+#include <linux/threads.h>
-#include <asm-generic/percpu.h>
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+#ifndef MODULE
+#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
+#define PER_CPU_ATTRIBUTES
+#else
+/*
+ * To calculate addresses of locally defined variables, GCC uses 32-bit
+ * displacement from the GP. Which doesn't work for per cpu variables in
+ * modules, as an offset to the kernel per cpu area is way above 4G.
+ *
+ * This forces allocation of a GOT entry for per cpu variable using
+ * ldq instruction with a 'literal' relocation.
+ */
+#define SHIFT_PERCPU_PTR(var, offset) ({ \
+ extern int simple_identifier_##var(void); \
+ unsigned long __ptr, tmp_gp; \
+ asm ( "br %1, 1f \n\
+ 1: ldgp %1, 0(%1) \n\
+ ldq %0, per_cpu__" #var"(%1)\t!literal" \
+ : "=&r"(__ptr), "=&r"(tmp_gp)); \
+ (typeof(&per_cpu_var(var)))(__ptr + (offset)); })
+
+#define PER_CPU_ATTRIBUTES __used
+
+#endif /* MODULE */
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+ (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
+#define __get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, my_cpu_offset))
+#define __raw_get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var) per_cpu_var(var)
+#define __raw_get_cpu_var(var) per_cpu_var(var)
+
+#define PER_CPU_ATTRIBUTES
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
#endif /* __ALPHA_PERCPU_H */
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
index ed221d6408f..afe20fa58c9 100644
--- a/include/asm-alpha/system.h
+++ b/include/asm-alpha/system.h
@@ -184,7 +184,7 @@ enum amask_enum {
__amask; })
#define __CALL_PAL_R0(NAME, TYPE) \
-static inline TYPE NAME(void) \
+extern inline TYPE NAME(void) \
{ \
register TYPE __r0 __asm__("$0"); \
__asm__ __volatile__( \
@@ -196,7 +196,7 @@ static inline TYPE NAME(void) \
}
#define __CALL_PAL_W1(NAME, TYPE0) \
-static inline void NAME(TYPE0 arg0) \
+extern inline void NAME(TYPE0 arg0) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
__asm__ __volatile__( \
@@ -207,7 +207,7 @@ static inline void NAME(TYPE0 arg0) \
}
#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
-static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
register TYPE1 __r17 __asm__("$17") = arg1; \
@@ -219,7 +219,7 @@ static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
}
#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
-static inline RTYPE NAME(TYPE0 arg0) \
+extern inline RTYPE NAME(TYPE0 arg0) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
@@ -232,7 +232,7 @@ static inline RTYPE NAME(TYPE0 arg0) \
}
#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
-static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h
index e8df1e7aae6..c00106bac52 100644
--- a/include/asm-alpha/vga.h
+++ b/include/asm-alpha/vga.h
@@ -13,7 +13,7 @@
#define VT_BUF_HAVE_MEMSETW
#define VT_BUF_HAVE_MEMCPYW
-extern inline void scr_writew(u16 val, volatile u16 *addr)
+static inline void scr_writew(u16 val, volatile u16 *addr)
{
if (__is_ioaddr(addr))
__raw_writew(val, (volatile u16 __iomem *) addr);
@@ -21,7 +21,7 @@ extern inline void scr_writew(u16 val, volatile u16 *addr)
*addr = val;
}
-extern inline u16 scr_readw(volatile const u16 *addr)
+static inline u16 scr_readw(volatile const u16 *addr)
{
if (__is_ioaddr(addr))
return __raw_readw((volatile const u16 __iomem *) addr);
@@ -29,7 +29,7 @@ extern inline u16 scr_readw(volatile const u16 *addr)
return *addr;
}
-extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
{
if (__is_ioaddr(s))
memsetw_io((u16 __iomem *) s, c, count);
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 96bd09e31e3..2526b6ed6fa 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -96,7 +96,7 @@ struct bfin_serial_port {
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index e924569ad1d..ebf592b59aa 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -88,7 +88,7 @@ struct bfin_serial_port {
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 41d7b6490bb..1bf56ffa22f 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -96,7 +96,7 @@ struct bfin_serial_port {
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 59b4ad4e5b4..5e29446a8e0 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -99,7 +99,7 @@ struct bfin_serial_port {
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
@@ -187,7 +187,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
#ifdef CONFIG_BFIN_UART1_CTSRTS
peripheral_request(P_UART1_RTS, DRIVER_NAME);
- peripheral_request(P_UART1_CTS DRIVER_NAME);
+ peripheral_request(P_UART1_CTS, DRIVER_NAME);
#endif
#endif
@@ -202,7 +202,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
#ifdef CONFIG_BFIN_UART3_CTSRTS
peripheral_request(P_UART3_RTS, DRIVER_NAME);
- peripheral_request(P_UART3_CTS DRIVER_NAME);
+ peripheral_request(P_UART3_CTS, DRIVER_NAME);
#endif
#endif
SSYNC();
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 30d90b580f1..8aa02780e64 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -88,7 +88,7 @@ struct bfin_serial_port {
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 92a6d91d0c1..7cd25b8e7c9 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,6 +1,6 @@
header-y += kvm.h
-ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += auxvec.h
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
index c3fd3eb2576..c2611f6cfe3 100644
--- a/include/asm-ia64/sn/simulator.h
+++ b/include/asm-ia64/sn/simulator.h
@@ -8,7 +8,7 @@
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
-
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
@@ -16,5 +16,10 @@
#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type)
#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2)
extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+#else
+#define IS_MEDUSA() 0
+#define SIMULATOR_SLEEP()
+#define IS_RUNNING_ON_SIMULATOR() 0
+#endif
#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 0c5a358863f..2de73dbb2e9 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -56,7 +56,7 @@ struct cpuinfo_mips {
struct cache_desc tcache; /* Tertiary/split secondary cache */
int srsets; /* Shadow register sets */
int core; /* physical core number */
-#if defined(CONFIG_MIPS_MT_SMTC)
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
/*
* In the MIPS MT "SMTC" model, each TC is considered
* to be a "CPU" for the purposes of scheduling, but
@@ -64,7 +64,7 @@ struct cpuinfo_mips {
* to all TCs within the same VPE.
*/
int vpe_id; /* Virtual Processor number */
-#endif /* CONFIG_MIPS_MT */
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
int tc_id; /* Thread Context number */
#endif
diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h
index 3a492f225f0..954807d9d66 100644
--- a/include/asm-mips/gic.h
+++ b/include/asm-mips/gic.h
@@ -24,8 +24,8 @@
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
-#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS)
-#define REGP(base, phys) REG32((unsigned int)(base) + (phys))
+#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys) REG32((unsigned long)(base) + (phys))
/* Accessors */
#define GIC_REG(segment, offset) \
diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
index bafe68b1061..1c37d70579b 100644
--- a/include/asm-mips/lasat/serial.h
+++ b/include/asm-mips/lasat/serial.h
@@ -4,10 +4,10 @@
#define LASAT_BASE_BAUD_100 (7372800 / 16)
#define LASAT_UART_REGS_BASE_100 0x1c8b0000
#define LASAT_UART_REGS_SHIFT_100 2
-#define LASATINT_UART_100 8
+#define LASATINT_UART_100 16
/* * LASAT 200 boards serial configuration */
#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
#define LASAT_UART_REGS_SHIFT_200 3
-#define LASATINT_UART_200 13
+#define LASATINT_UART_200 21
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 1b5064dac00..0d302bad449 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -615,6 +615,7 @@ enum soc_au1500_ints {
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h
index 60e2f9338fc..51b34a48c84 100644
--- a/include/asm-mips/pgtable-bits.h
+++ b/include/asm-mips/pgtable-bits.h
@@ -134,6 +134,4 @@
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
-#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT)
-
#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 7381916dfcb..bca352e033c 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -1,6 +1,5 @@
include include/asm-generic/Kbuild.asm
-header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
index df111c362a7..b2efb332580 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -17,8 +17,6 @@
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-int check_media_bay(struct device_node *which_bay, int what);
-
/* Number of bays in the machine or 0 */
extern int media_bay_count;
@@ -29,6 +27,16 @@ int check_media_bay_by_base(unsigned long base, int what);
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+ return -ENODEV;
+}
+
#endif
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 6abead6e681..99348c1f4ca 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -131,7 +131,6 @@ struct spu {
u64 flags;
u64 class_0_pending;
u64 class_0_dar;
- u64 class_0_dsisr;
u64 class_1_dar;
u64 class_1_dsisr;
size_t ls_size;
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index 129ec148d45..a40fd491250 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -254,7 +254,7 @@ struct spu_state {
u64 spu_chnldata_RW[32];
u32 spu_mailbox_data[4];
u32 pu_mailbox_data[1];
- u64 class_0_dar, class_0_dsisr, class_0_pending;
+ u64 class_0_dar, class_0_pending;
u64 class_1_dar, class_1_dsisr;
unsigned long suspend_time;
spinlock_t register_lock;
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 2b6559a6d11..5235f875b93 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -34,7 +34,7 @@
* SMP since it is only used to order updates to system memory.
*/
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory")
+#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
#define read_barrier_depends() do { } while(0)
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index 6e6458853a3..bb06027fc83 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -112,8 +112,8 @@ extern int geode_get_dev_base(unsigned int dev);
#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
#define VSA_VR_SIGNATURE 0x0003
#define VSA_VR_MEM_SIZE 0x0200
-#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
-
+#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG 0x534d /* General Software signature */
/* GPIO */
#define GPIO_OUTPUT_VAL 0x00
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 1d8cd01fa51..844f2a89afb 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -18,6 +18,7 @@
#include <linux/kvm_para.h>
#include <linux/kvm_types.h>
+#include <asm/pvclock-abi.h>
#include <asm/desc.h>
#define KVM_MAX_VCPUS 16
@@ -282,7 +283,8 @@ struct kvm_vcpu_arch {
struct x86_emulate_ctxt emulate_ctxt;
gpa_t time;
- struct kvm_vcpu_time_info hv_clock;
+ struct pvclock_vcpu_time_info hv_clock;
+ unsigned int hv_clock_tsc_khz;
unsigned int time_offset;
struct page *time_page;
};
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
index 50984594207..bfd9900742b 100644
--- a/include/asm-x86/kvm_para.h
+++ b/include/asm-x86/kvm_para.h
@@ -48,24 +48,6 @@ struct kvm_mmu_op_release_pt {
#ifdef __KERNEL__
#include <asm/processor.h>
-/* xen binary-compatible interface. See xen headers for details */
-struct kvm_vcpu_time_info {
- uint32_t version;
- uint32_t pad0;
- uint64_t tsc_timestamp;
- uint64_t system_time;
- uint32_t tsc_to_system_mul;
- int8_t tsc_shift;
- int8_t pad[3];
-} __attribute__((__packed__)); /* 32 bytes */
-
-struct kvm_wall_clock {
- uint32_t wc_version;
- uint32_t wc_sec;
- uint32_t wc_nsec;
-} __attribute__((__packed__));
-
-
extern void kvmclock_init(void);
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index 3707650a169..2b5f2c91db2 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -18,7 +18,7 @@ static inline unsigned long long native_read_tscp(unsigned int *aux)
unsigned long low, high;
asm volatile(".byte 0x0f,0x01,0xf9"
: "=a" (low), "=d" (high), "=c" (*aux));
- return low | ((u64)high >> 32);
+ return low | ((u64)high << 32);
}
/*
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index 424e82f8ae2..ccf0ba3c3ab 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -14,7 +14,8 @@
#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
#ifdef CONFIG_X86_PAE
-#define __PHYSICAL_MASK_SHIFT 36
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT 44
#define __VIRTUAL_MASK_SHIFT 32
#define PAGETABLE_LEVELS 3
diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h
new file mode 100644
index 00000000000..6857f840b24
--- /dev/null
+++ b/include/asm-x86/pvclock-abi.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_PVCLOCK_ABI_H_
+#define _ASM_X86_PVCLOCK_ABI_H_
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time. There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done. Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_PVCLOCK_ABI_H_ */
diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h
new file mode 100644
index 00000000000..85b1bba8e0a
--- /dev/null
+++ b/include/asm-x86/pvclock.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_PVCLOCK_H_
+#define _ASM_X86_PVCLOCK_H_
+
+#include <linux/clocksource.h>
+#include <asm/pvclock-abi.h>
+
+/* some helper functions for xen and kvm pv clock sources */
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
+ struct pvclock_vcpu_time_info *vcpu,
+ struct timespec *ts);
+
+#endif /* _ASM_X86_PVCLOCK_H_ */
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index baf3a4dce28..e11f24038b1 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -150,13 +150,9 @@ static inline pte_t __pte_ma(pteval_t x)
return (pte_t) { .pte = x };
}
-#ifdef CONFIG_X86_PAE
#define pmd_val_ma(v) ((v).pmd)
#define pud_val_ma(v) ((v).pgd.pgd)
#define __pmd_ma(x) ((pmd_t) { (x) } )
-#else /* !X86_PAE */
-#define pmd_val_ma(v) ((v).pud.pgd.pgd)
-#endif /* CONFIG_X86_PAE */
#define pgd_val_ma(x) ((x).pgd)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 93b98856007..71d70d1fbce 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -166,6 +166,9 @@ unifdef-y += acct.h
unifdef-y += adb.h
unifdef-y += adfs_fs.h
unifdef-y += agpgart.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+unifdef-y += a.out.h
+endif
unifdef-y += apm_bios.h
unifdef-y += atalk.h
unifdef-y += atmdev.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index 208f4e8ed30..e86dfca4458 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,8 +1,6 @@
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
-#ifdef CONFIG_ARCH_SUPPORTS_AOUT
-
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
@@ -277,10 +275,4 @@ struct relocation_info
#endif /* no N_RELOCATION_INFO_DECLARED. */
#endif /*__ASSEMBLY__ */
-#else /* CONFIG_ARCH_SUPPORTS_AOUT */
-#ifndef __ASSEMBLY__
-struct exec {
-};
-#endif
-#endif /* CONFIG_ARCH_SUPPORTS_AOUT */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 661d90d6cf7..972b12bcfb3 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -30,14 +30,6 @@
#ifndef _AGP_BACKEND_H
#define _AGP_BACKEND_H 1
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
enum chipset_type {
NOT_SUPPORTED,
SUPPORTED,
@@ -57,7 +49,7 @@ struct agp_kern_info {
size_t aper_size;
int max_memory; /* In pages */
int current_memory;
- int cant_use_aperture;
+ bool cant_use_aperture;
unsigned long page_mask;
struct vm_operations_struct *vm_ops;
};
@@ -83,9 +75,9 @@ struct agp_memory {
off_t pg_start;
u32 type;
u32 physical;
- u8 is_bound;
- u8 is_flushed;
- u8 vmalloc_flag;
+ bool is_bound;
+ bool is_flushed;
+ bool vmalloc_flag;
};
#define AGP_NORMAL_MEMORY 0
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index 62aef589eb9..c8fdb6e658e 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -206,8 +206,8 @@ struct agp_front_data {
struct agp_controller *current_controller;
struct agp_controller *controllers;
struct agp_file_private *file_priv_list;
- u8 used_by_controller;
- u8 backend_acquired;
+ bool used_by_controller;
+ bool backend_acquired;
};
#endif /* __KERNEL__ */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 63c3bb98558..8b82974bdc1 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -571,7 +571,7 @@ extern void audit_log_lost(const char *message);
extern int audit_update_lsm_rules(void);
/* Private API (for audit.c only) */
-extern int audit_filter_user(struct netlink_skb_parms *cb, int type);
+extern int audit_filter_user(struct netlink_skb_parms *cb);
extern int audit_filter_type(int type);
extern int audit_receive_filter(int type, int pid, int uid, int seq,
void *data, size_t datasz, uid_t loginuid,
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 6a5dbdc8a7d..686895bacd9 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -94,7 +94,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat,
unsigned long freepfn,
unsigned long startpfn,
unsigned long endpfn);
-extern void reserve_bootmem_node(pg_data_t *pgdat,
+extern int reserve_bootmem_node(pg_data_t *pgdat,
unsigned long physaddr,
unsigned long size,
int flags);
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 2a6639407c8..d982eb89c77 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -300,7 +300,7 @@ extern int d_validate(struct dentry *, struct dentry *);
extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
extern char *__d_path(const struct path *path, struct path *root, char *, int);
-extern char *d_path(struct path *, char *, int);
+extern char *d_path(const struct path *, char *, int);
extern char *dentry_path(struct dentry *, char *, int);
/* Allocation counts.. */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d490779f18d..d8e2762ed14 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -83,6 +83,7 @@ extern int dir_notify_enable;
#define READ_SYNC (READ | (1 << BIO_RW_SYNC))
#define READ_META (READ | (1 << BIO_RW_META))
#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC))
+#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC))
#define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER))
#define SEL_IN 1
@@ -894,8 +895,6 @@ static inline int file_check_writeable(struct file *filp)
typedef struct files_struct *fl_owner_t;
struct file_lock_operations {
- void (*fl_insert)(struct file_lock *); /* lock insertion callback */
- void (*fl_remove)(struct file_lock *); /* lock removal callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
};
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index fb9af6a0fe9..8dc73013219 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -171,7 +171,7 @@ struct i2c_client {
struct i2c_adapter *adapter; /* the adapter we sit on */
struct i2c_driver *driver; /* and our access routines */
struct device dev; /* the device structure */
- int irq; /* irq issued by device (or -1) */
+ int irq; /* irq issued by device */
struct list_head list; /* DEPRECATED */
struct completion released;
};
diff --git a/include/linux/input.h b/include/linux/input.h
index e075c4b762f..d150c57e5f0 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -534,8 +534,8 @@ struct input_absinfo {
#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
#define KEY_FRAMEFORWARD 0x1b5
-
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 092b1b25291..de9d1df4bba 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -33,6 +33,7 @@
#define KVM_REQ_REPORT_TPR_ACCESS 2
#define KVM_REQ_MMU_RELOAD 3
#define KVM_REQ_TRIPLE_FAULT 4
+#define KVM_REQ_PENDING_TIMER 5
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 509159bcd4e..d18b1dd49fa 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -206,6 +206,7 @@ struct pci_dev {
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+ struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
#ifdef CONFIG_PCI_MSI
struct list_head msi_list;
#endif
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 06d3e6eb9ca..917707e6151 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -66,8 +66,7 @@ struct thermal_cooling_device {
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
/* thermal zone devices with the same type share one hwmon device */
struct thermal_hwmon_device {
char type[THERMAL_NAME_LENGTH];
@@ -94,8 +93,7 @@ struct thermal_zone_device {
struct idr idr;
struct mutex lock; /* protect cooling devices list */
struct list_head node;
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
struct list_head hwmon_node;
struct thermal_hwmon_device *hwmon;
struct thermal_hwmon_attr temp_input; /* hwmon sys attr */
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 59f1c0bd8f9..d2a00358676 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -27,8 +27,7 @@
* This routine is called by the kernel to write a series of
* characters to the tty device. The characters may come from
* user space or kernel space. This routine will return the
- * number of characters actually accepted for writing. This
- * routine is mandatory.
+ * number of characters actually accepted for writing.
*
* Optional: Required for writable devices.
*
@@ -134,7 +133,7 @@
* This routine notifies the tty driver that it should hangup the
* tty device.
*
- * Required:
+ * Optional:
*
* void (*break_ctl)(struct tty_stuct *tty, int state);
*
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
index cd599ad29fb..db431d513f2 100644
--- a/include/media/cx25840.h
+++ b/include/media/cx25840.h
@@ -32,12 +32,16 @@ enum cx25840_video_input {
CX25840_COMPOSITE7,
CX25840_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX25840_SVIDEO_LUMA1 = 0x10,
CX25840_SVIDEO_LUMA2 = 0x20,
CX25840_SVIDEO_LUMA3 = 0x30,
CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_LUMA5 = 0x50,
+ CX25840_SVIDEO_LUMA6 = 0x60,
+ CX25840_SVIDEO_LUMA7 = 0x70,
+ CX25840_SVIDEO_LUMA8 = 0x80,
CX25840_SVIDEO_CHROMA4 = 0x400,
CX25840_SVIDEO_CHROMA5 = 0x500,
CX25840_SVIDEO_CHROMA6 = 0x600,
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index bfee8be5d63..b8e8aa91905 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -146,6 +146,7 @@ extern IR_KEYTAB_TYPE ir_codes_behold_columbus[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE];
#endif
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 33f01ae08f7..859f7a6f6f6 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -40,9 +40,9 @@
#define VFL_TYPE_VTX 3
/* Video standard functions */
-extern char *v4l2_norm_to_name(v4l2_std_id id);
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name);
+ int id, const char *name);
/* Prints the ioctl in a human-readable format */
extern void v4l_printk_ioctl(unsigned int cmd);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a7044958c75..3a204acad90 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -557,6 +557,15 @@ enum ieee80211_key_alg {
ALG_CCMP,
};
+/**
+ * enum ieee80211_key_len - key length
+ * @WEP40: WEP 5 byte long key
+ * @WEP104: WEP 13 byte long key
+ */
+enum ieee80211_key_len {
+ LEN_WEP40 = 5,
+ LEN_WEP104 = 13,
+};
/**
* enum ieee80211_key_flags - key flags
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index ab502ec1c61..a87fc0312ed 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -178,7 +178,7 @@ extern struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops);
extern struct Qdisc *qdisc_create_dflt(struct net_device *dev,
struct Qdisc_ops *ops, u32 parentid);
extern void tcf_destroy(struct tcf_proto *tp);
-extern void tcf_destroy_chain(struct tcf_proto *fl);
+extern void tcf_destroy_chain(struct tcf_proto **fl);
static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff_head *list)
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 9b018da48cf..819a0331cda 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -10,6 +10,7 @@
#define __XEN_PUBLIC_XEN_H__
#include <asm/xen/interface.h>
+#include <asm/pvclock-abi.h>
/*
* XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
@@ -336,7 +337,7 @@ struct vcpu_info {
uint8_t evtchn_upcall_mask;
unsigned long evtchn_pending_sel;
struct arch_vcpu_info arch;
- struct vcpu_time_info time;
+ struct pvclock_vcpu_time_info time;
}; /* 64 bytes (x86) */
/*
@@ -384,9 +385,7 @@ struct shared_info {
* Wallclock time: updated only by control software. Guests should base
* their gettimeofday() syscall on this wallclock-base value.
*/
- uint32_t wc_version; /* Version counter: see vcpu_time_info_t. */
- uint32_t wc_sec; /* Secs 00:00:00 UTC, Jan 1, 1970. */
- uint32_t wc_nsec; /* Nsecs 00:00:00 UTC, Jan 1, 1970. */
+ struct pvclock_wall_clock wc;
struct arch_shared_info arch;
diff --git a/kernel/audit.c b/kernel/audit.c
index e8692a5748c..e092f1c0ce3 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -738,7 +738,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
- err = audit_filter_user(&NETLINK_CB(skb), msg_type);
+ err = audit_filter_user(&NETLINK_CB(skb));
if (err == 1) {
err = 0;
if (msg_type == AUDIT_USER_TTY) {
@@ -779,7 +779,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
}
/* fallthrough */
case AUDIT_LIST:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
@@ -798,7 +798,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
}
/* fallthrough */
case AUDIT_LIST_RULES:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 0e0bd27e651..98c50cc671b 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1544,6 +1544,7 @@ static void audit_log_rule_change(uid_t loginuid, u32 sessionid, u32 sid,
* @data: payload data
* @datasz: size of payload data
* @loginuid: loginuid of sender
+ * @sessionid: sessionid for netlink audit message
* @sid: SE Linux Security ID of sender
*/
int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
@@ -1720,7 +1721,7 @@ static int audit_filter_user_rules(struct netlink_skb_parms *cb,
return 1;
}
-int audit_filter_user(struct netlink_skb_parms *cb, int type)
+int audit_filter_user(struct netlink_skb_parms *cb)
{
enum audit_state state = AUDIT_DISABLED;
struct audit_entry *e;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 039baa4cd90..9fceb97e989 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1037,8 +1037,8 @@ int current_cpuset_is_being_rebound(void)
static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
- if ((int)val < 0)
- val = -1;
+ if (val < -1 || val >= SD_LV_MAX)
+ return -EINVAL;
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
@@ -1890,6 +1890,12 @@ static void common_cpu_mem_hotplug_unplug(void)
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
scan_for_empty_cpusets(&top_cpuset);
+ /*
+ * Scheduler destroys domains on hotplug events.
+ * Rebuild them based on the current settings.
+ */
+ rebuild_sched_domains();
+
cgroup_unlock();
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 449def8074f..7d1136e97c1 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1096,21 +1096,64 @@ static void unqueue_me_pi(struct futex_q *q)
* private futexes.
*/
static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
- struct task_struct *newowner)
+ struct task_struct *newowner,
+ struct rw_semaphore *fshared)
{
u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
struct futex_pi_state *pi_state = q->pi_state;
+ struct task_struct *oldowner = pi_state->owner;
u32 uval, curval, newval;
- int ret;
+ int ret, attempt = 0;
/* Owner died? */
+ if (!pi_state->owner)
+ newtid |= FUTEX_OWNER_DIED;
+
+ /*
+ * We are here either because we stole the rtmutex from the
+ * pending owner or we are the pending owner which failed to
+ * get the rtmutex. We have to replace the pending owner TID
+ * in the user space variable. This must be atomic as we have
+ * to preserve the owner died bit here.
+ *
+ * Note: We write the user space value _before_ changing the
+ * pi_state because we can fault here. Imagine swapped out
+ * pages or a fork, which was running right before we acquired
+ * mmap_sem, that marked all the anonymous memory readonly for
+ * cow.
+ *
+ * Modifying pi_state _before_ the user space value would
+ * leave the pi_state in an inconsistent state when we fault
+ * here, because we need to drop the hash bucket lock to
+ * handle the fault. This might be observed in the PID check
+ * in lookup_pi_state.
+ */
+retry:
+ if (get_futex_value_locked(&uval, uaddr))
+ goto handle_fault;
+
+ while (1) {
+ newval = (uval & FUTEX_OWNER_DIED) | newtid;
+
+ curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+
+ if (curval == -EFAULT)
+ goto handle_fault;
+ if (curval == uval)
+ break;
+ uval = curval;
+ }
+
+ /*
+ * We fixed up user space. Now we need to fix the pi_state
+ * itself.
+ */
if (pi_state->owner != NULL) {
spin_lock_irq(&pi_state->owner->pi_lock);
WARN_ON(list_empty(&pi_state->list));
list_del_init(&pi_state->list);
spin_unlock_irq(&pi_state->owner->pi_lock);
- } else
- newtid |= FUTEX_OWNER_DIED;
+ }
pi_state->owner = newowner;
@@ -1118,26 +1161,35 @@ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
WARN_ON(!list_empty(&pi_state->list));
list_add(&pi_state->list, &newowner->pi_state_list);
spin_unlock_irq(&newowner->pi_lock);
+ return 0;
/*
- * We own it, so we have to replace the pending owner
- * TID. This must be atomic as we have preserve the
- * owner died bit here.
+ * To handle the page fault we need to drop the hash bucket
+ * lock here. That gives the other task (either the pending
+ * owner itself or the task which stole the rtmutex) the
+ * chance to try the fixup of the pi_state. So once we are
+ * back from handling the fault we need to check the pi_state
+ * after reacquiring the hash bucket lock and before trying to
+ * do another fixup. When the fixup has been done already we
+ * simply return.
*/
- ret = get_futex_value_locked(&uval, uaddr);
+handle_fault:
+ spin_unlock(q->lock_ptr);
- while (!ret) {
- newval = (uval & FUTEX_OWNER_DIED) | newtid;
+ ret = futex_handle_fault((unsigned long)uaddr, fshared, attempt++);
- curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+ spin_lock(q->lock_ptr);
- if (curval == -EFAULT)
- ret = -EFAULT;
- if (curval == uval)
- break;
- uval = curval;
- }
- return ret;
+ /*
+ * Check if someone else fixed it for us:
+ */
+ if (pi_state->owner != oldowner)
+ return 0;
+
+ if (ret)
+ return ret;
+
+ goto retry;
}
/*
@@ -1507,7 +1559,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared,
* that case:
*/
if (q.pi_state->owner != curr)
- ret = fixup_pi_state_owner(uaddr, &q, curr);
+ ret = fixup_pi_state_owner(uaddr, &q, curr, fshared);
} else {
/*
* Catch the rare case, where the lock was released
@@ -1539,7 +1591,8 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared,
int res;
owner = rt_mutex_owner(&q.pi_state->pi_mutex);
- res = fixup_pi_state_owner(uaddr, &q, owner);
+ res = fixup_pi_state_owner(uaddr, &q, owner,
+ fshared);
/* propagate -EFAULT, if the fixup failed */
if (res)
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 79e3c90113c..3ec23c3ec97 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1499,7 +1499,8 @@ int kgdb_nmicallback(int cpu, void *regs)
return 1;
}
-void kgdb_console_write(struct console *co, const char *s, unsigned count)
+static void kgdb_console_write(struct console *co, const char *s,
+ unsigned count)
{
unsigned long flags;
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index f4ffbd0f306..a38895a5b8e 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -89,8 +89,22 @@ static void force_quiescent_state(struct rcu_data *rdp,
/*
* Don't send IPI to itself. With irqs disabled,
* rdp->cpu is the current cpu.
+ *
+ * cpu_online_map is updated by the _cpu_down()
+ * using stop_machine_run(). Since we're in irqs disabled
+ * section, stop_machine_run() is not exectuting, hence
+ * the cpu_online_map is stable.
+ *
+ * However, a cpu might have been offlined _just_ before
+ * we disabled irqs while entering here.
+ * And rcu subsystem might not yet have handled the CPU_DEAD
+ * notification, leading to the offlined cpu's bit
+ * being set in the rcp->cpumask.
+ *
+ * Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent
+ * sending smp_reschedule() to an offlined CPU.
*/
- cpumask = rcp->cpumask;
+ cpus_and(cpumask, rcp->cpumask, cpu_online_map);
cpu_clear(rdp->cpu, cpumask);
for_each_cpu_mask(cpu, cpumask)
smp_send_reschedule(cpu);
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index e1cdf196a51..5e02b774070 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -217,8 +217,6 @@ long rcu_batches_completed(void)
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
void __rcu_read_lock(void)
{
int idx;
diff --git a/kernel/sched.c b/kernel/sched.c
index eaf6751e761..94ead43eda6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1127,6 +1127,7 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer)
return HRTIMER_NORESTART;
}
+#ifdef CONFIG_SMP
static void hotplug_hrtick_disable(int cpu)
{
struct rq *rq = cpu_rq(cpu);
@@ -1182,6 +1183,7 @@ static void init_hrtick(void)
{
hotcpu_notifier(hotplug_hrtick, 0);
}
+#endif /* CONFIG_SMP */
static void init_rq_hrtick(struct rq *rq)
{
@@ -4396,22 +4398,20 @@ do_wait_for_common(struct completion *x, long timeout, int state)
signal_pending(current)) ||
(state == TASK_KILLABLE &&
fatal_signal_pending(current))) {
- __remove_wait_queue(&x->wait, &wait);
- return -ERESTARTSYS;
+ timeout = -ERESTARTSYS;
+ break;
}
__set_current_state(state);
spin_unlock_irq(&x->wait.lock);
timeout = schedule_timeout(timeout);
spin_lock_irq(&x->wait.lock);
- if (!timeout) {
- __remove_wait_queue(&x->wait, &wait);
- return timeout;
- }
- } while (!x->done);
+ } while (!x->done && timeout);
__remove_wait_queue(&x->wait, &wait);
+ if (!x->done)
+ return timeout;
}
x->done--;
- return timeout;
+ return timeout ?: 1;
}
static long __sched
@@ -5887,6 +5887,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu)
next = pick_next_task(rq, rq->curr);
if (!next)
break;
+ next->sched_class->put_prev_task(rq, next);
migrate_dead(dead_cpu, next);
}
@@ -6877,7 +6878,12 @@ static int default_relax_domain_level = -1;
static int __init setup_relax_domain_level(char *str)
{
- default_relax_domain_level = simple_strtoul(str, NULL, 0);
+ unsigned long val;
+
+ val = simple_strtoul(str, NULL, 0);
+ if (val < SD_LV_MAX)
+ default_relax_domain_level = val;
+
return 1;
}
__setup("relax_domain_level=", setup_relax_domain_level);
@@ -7236,6 +7242,18 @@ void __attribute__((weak)) arch_update_cpu_topology(void)
}
/*
+ * Free current domain masks.
+ * Called after all cpus are attached to NULL domain.
+ */
+static void free_sched_domains(void)
+{
+ ndoms_cur = 0;
+ if (doms_cur != &fallback_doms)
+ kfree(doms_cur);
+ doms_cur = &fallback_doms;
+}
+
+/*
* Set up scheduler domains and groups. Callers must hold the hotplug lock.
* For now this just excludes isolated cpus, but could be used to
* exclude other special cases in the future.
@@ -7382,6 +7400,7 @@ int arch_reinit_sched_domains(void)
get_online_cpus();
mutex_lock(&sched_domains_mutex);
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
err = arch_init_sched_domains(&cpu_online_map);
mutex_unlock(&sched_domains_mutex);
put_online_cpus();
@@ -7467,6 +7486,7 @@ static int update_sched_domains(struct notifier_block *nfb,
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
return NOTIFY_OK;
case CPU_UP_CANCELED:
@@ -7485,8 +7505,16 @@ static int update_sched_domains(struct notifier_block *nfb,
return NOTIFY_DONE;
}
+#ifndef CONFIG_CPUSETS
+ /*
+ * Create default domain partitioning if cpusets are disabled.
+ * Otherwise we let cpusets rebuild the domains based on the
+ * current setup.
+ */
+
/* The hotplug lock is already held by cpu_up/cpu_down */
arch_init_sched_domains(&cpu_online_map);
+#endif
return NOTIFY_OK;
}
@@ -7626,7 +7654,6 @@ static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
else
rt_se->rt_rq = parent->my_q;
- rt_se->rt_rq = &rq->rt;
rt_se->my_q = rt_rq;
rt_se->parent = parent;
INIT_LIST_HEAD(&rt_se->run_list);
@@ -8348,7 +8375,7 @@ static unsigned long to_ratio(u64 period, u64 runtime)
#ifdef CONFIG_CGROUP_SCHED
static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime)
{
- struct task_group *tgi, *parent = tg->parent;
+ struct task_group *tgi, *parent = tg ? tg->parent : NULL;
unsigned long total = 0;
if (!parent) {
@@ -8475,6 +8502,9 @@ int sched_group_set_rt_period(struct task_group *tg, long rt_period_us)
rt_period = (u64)rt_period_us * NSEC_PER_USEC;
rt_runtime = tg->rt_bandwidth.rt_runtime;
+ if (rt_period == 0)
+ return -EINVAL;
+
return tg_set_bandwidth(tg, rt_period, rt_runtime);
}
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 3432d573205..0f3c19197fa 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -250,7 +250,8 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
if (rt_rq->rt_time || rt_rq->rt_nr_running)
idle = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
- }
+ } else if (rt_rq->rt_nr_running)
+ idle = 0;
if (enqueue)
sched_rt_rq_enqueue(rt_rq);
@@ -449,13 +450,19 @@ void dec_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
#endif
}
-static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+static void __enqueue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
struct rt_rq *group_rq = group_rt_rq(rt_se);
- if (group_rq && rt_rq_throttled(group_rq))
+ /*
+ * Don't enqueue the group if its throttled, or when empty.
+ * The latter is a consequence of the former when a child group
+ * get throttled and the current group doesn't have any other
+ * active members.
+ */
+ if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running))
return;
list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
@@ -464,7 +471,7 @@ static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
inc_rt_tasks(rt_se, rt_rq);
}
-static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+static void __dequeue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
@@ -480,11 +487,10 @@ static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
* Because the prio of an upper entry depends on the lower
* entries, we must remove entries top - down.
*/
-static void dequeue_rt_stack(struct task_struct *p)
+static void dequeue_rt_stack(struct sched_rt_entity *rt_se)
{
- struct sched_rt_entity *rt_se, *back = NULL;
+ struct sched_rt_entity *back = NULL;
- rt_se = &p->rt;
for_each_sched_rt_entity(rt_se) {
rt_se->back = back;
back = rt_se;
@@ -492,7 +498,26 @@ static void dequeue_rt_stack(struct task_struct *p)
for (rt_se = back; rt_se; rt_se = rt_se->back) {
if (on_rt_rq(rt_se))
- dequeue_rt_entity(rt_se);
+ __dequeue_rt_entity(rt_se);
+ }
+}
+
+static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+ for_each_sched_rt_entity(rt_se)
+ __enqueue_rt_entity(rt_se);
+}
+
+static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+
+ for_each_sched_rt_entity(rt_se) {
+ struct rt_rq *rt_rq = group_rt_rq(rt_se);
+
+ if (rt_rq && rt_rq->rt_nr_running)
+ __enqueue_rt_entity(rt_se);
}
}
@@ -506,32 +531,15 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup)
if (wakeup)
rt_se->timeout = 0;
- dequeue_rt_stack(p);
-
- /*
- * enqueue everybody, bottom - up.
- */
- for_each_sched_rt_entity(rt_se)
- enqueue_rt_entity(rt_se);
+ enqueue_rt_entity(rt_se);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
{
struct sched_rt_entity *rt_se = &p->rt;
- struct rt_rq *rt_rq;
update_curr_rt(rq);
-
- dequeue_rt_stack(p);
-
- /*
- * re-enqueue all non-empty rt_rq entities.
- */
- for_each_sched_rt_entity(rt_se) {
- rt_rq = group_rt_rq(rt_se);
- if (rt_rq && rt_rq->rt_nr_running)
- enqueue_rt_entity(rt_se);
- }
+ dequeue_rt_entity(rt_se);
}
/*
@@ -542,8 +550,10 @@ static
void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se)
{
struct rt_prio_array *array = &rt_rq->active;
+ struct list_head *queue = array->queue + rt_se_prio(rt_se);
- list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
+ if (on_rt_rq(rt_se))
+ list_move_tail(&rt_se->run_list, queue);
}
static void requeue_task_rt(struct rq *rq, struct task_struct *p)
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index a38878e0e49..80179ef7450 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -198,6 +198,9 @@ static inline void sched_info_queued(struct task_struct *t)
/*
* Called when a process ceases being the active-running process, either
* voluntarily or involuntarily. Now we can calculate how long we ran.
+ * Also, if the process is still in the TASK_RUNNING state, call
+ * sched_info_queued() to mark that it has now again started waiting on
+ * the runqueue.
*/
static inline void sched_info_depart(struct task_struct *t)
{
@@ -206,6 +209,9 @@ static inline void sched_info_depart(struct task_struct *t)
t->sched_info.cpu_time += delta;
rq_sched_info_depart(task_rq(t), delta);
+
+ if (t->state == TASK_RUNNING)
+ sched_info_queued(t);
}
/*
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 01b6522fd92..c828c2339cc 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -49,12 +49,17 @@ static unsigned long get_timestamp(int this_cpu)
return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */
}
-void touch_softlockup_watchdog(void)
+static void __touch_softlockup_watchdog(void)
{
int this_cpu = raw_smp_processor_id();
__raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu);
}
+
+void touch_softlockup_watchdog(void)
+{
+ __raw_get_cpu_var(touch_timestamp) = 0;
+}
EXPORT_SYMBOL(touch_softlockup_watchdog);
void touch_all_softlockup_watchdogs(void)
@@ -80,7 +85,7 @@ void softlockup_tick(void)
unsigned long now;
if (touch_timestamp == 0) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
@@ -95,7 +100,7 @@ void softlockup_tick(void)
/* do not print during early bootup: */
if (unlikely(system_state != SYSTEM_RUNNING)) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
@@ -214,7 +219,7 @@ static int watchdog(void *__bind_cpu)
sched_setscheduler(current, SCHED_FIFO, &param);
/* initialize timestamp */
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
set_current_state(TASK_INTERRUPTIBLE);
/*
@@ -223,7 +228,7 @@ static int watchdog(void *__bind_cpu)
* debug-printout triggers in softlockup_tick().
*/
while (!kthread_should_stop()) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
schedule();
if (kthread_should_stop())
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index a76a5e122ae..85b18d79be8 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -68,6 +68,7 @@ static int fill_pool(void)
{
gfp_t gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
struct debug_obj *new;
+ unsigned long flags;
if (likely(obj_pool_free >= ODEBUG_POOL_MIN_LEVEL))
return obj_pool_free;
@@ -81,10 +82,10 @@ static int fill_pool(void)
if (!new)
return obj_pool_free;
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
hlist_add_head(&new->node, &obj_pool);
obj_pool_free++;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
}
return obj_pool_free;
}
@@ -110,16 +111,13 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b)
}
/*
- * Allocate a new object. If the pool is empty and no refill possible,
- * switch off the debugger.
+ * Allocate a new object. If the pool is empty, switch off the debugger.
*/
static struct debug_obj *
alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
{
struct debug_obj *obj = NULL;
- int retry = 0;
-repeat:
spin_lock(&pool_lock);
if (obj_pool.first) {
obj = hlist_entry(obj_pool.first, typeof(*obj), node);
@@ -141,9 +139,6 @@ repeat:
}
spin_unlock(&pool_lock);
- if (fill_pool() && !obj && !retry++)
- goto repeat;
-
return obj;
}
@@ -261,6 +256,8 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack)
struct debug_obj *obj;
unsigned long flags;
+ fill_pool();
+
db = get_bucket((unsigned long) addr);
spin_lock_irqsave(&db->lock, flags);
diff --git a/lib/ts_bm.c b/lib/ts_bm.c
index d90822c378a..4a7fce72898 100644
--- a/lib/ts_bm.c
+++ b/lib/ts_bm.c
@@ -63,7 +63,7 @@ static unsigned int bm_find(struct ts_config *conf, struct ts_state *state)
struct ts_bm *bm = ts_config_priv(conf);
unsigned int i, text_len, consumed = state->offset;
const u8 *text;
- int shift = bm->patlen, bs;
+ int shift = bm->patlen - 1, bs;
for (;;) {
text_len = conf->get_next_block(consumed, &text, conf, state);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index e8fb927392b..8d9f60e06f6 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -442,15 +442,17 @@ unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
return init_bootmem_core(pgdat, freepfn, startpfn, endpfn);
}
-void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
unsigned long size, int flags)
{
int ret;
ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
if (ret < 0)
- return;
+ return -ENOMEM;
reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+
+ return 0;
}
void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
diff --git a/mm/memory.c b/mm/memory.c
index 19e0ae9beec..d14b251a25a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -999,17 +999,15 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
goto no_page_table;
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
- if (!ptep)
- goto out;
pte = *ptep;
if (!pte_present(pte))
- goto unlock;
+ goto no_page;
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
page = vm_normal_page(vma, address, pte);
if (unlikely(!page))
- goto unlock;
+ goto bad_page;
if (flags & FOLL_GET)
get_page(page);
@@ -1024,6 +1022,15 @@ unlock:
out:
return page;
+bad_page:
+ pte_unmap_unlock(ptep, ptl);
+ return ERR_PTR(-EFAULT);
+
+no_page:
+ pte_unmap_unlock(ptep, ptl);
+ if (!pte_none(pte))
+ return page;
+ /* Fall through to ZERO_PAGE handling */
no_page_table:
/*
* When core dumping an enormous anonymous area that nobody
@@ -1038,6 +1045,26 @@ no_page_table:
return page;
}
+/* Can we do the FOLL_ANON optimization? */
+static inline int use_zero_page(struct vm_area_struct *vma)
+{
+ /*
+ * We don't want to optimize FOLL_ANON for make_pages_present()
+ * when it tries to page in a VM_LOCKED region. As to VM_SHARED,
+ * we want to get the page from the page tables to make sure
+ * that we serialize and update with any other user of that
+ * mapping.
+ */
+ if (vma->vm_flags & (VM_LOCKED | VM_SHARED))
+ return 0;
+ /*
+ * And if we have a fault or a nopfn routine, it's not an
+ * anonymous region.
+ */
+ return !vma->vm_ops ||
+ (!vma->vm_ops->fault && !vma->vm_ops->nopfn);
+}
+
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
@@ -1112,8 +1139,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
foll_flags = FOLL_TOUCH;
if (pages)
foll_flags |= FOLL_GET;
- if (!write && !(vma->vm_flags & VM_LOCKED) &&
- (!vma->vm_ops || !vma->vm_ops->fault))
+ if (!write && use_zero_page(vma))
foll_flags |= FOLL_ANON;
do {
@@ -1159,6 +1185,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
cond_resched();
}
+ if (IS_ERR(page))
+ return i ? i : PTR_ERR(page);
if (pages) {
pages[i] = page;
@@ -1757,7 +1785,6 @@ gotten:
page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte))) {
if (old_page) {
- page_remove_rmap(old_page, vma);
if (!PageAnon(old_page)) {
dec_mm_counter(mm, file_rss);
inc_mm_counter(mm, anon_rss);
@@ -1779,6 +1806,32 @@ gotten:
lru_cache_add_active(new_page);
page_add_new_anon_rmap(new_page, vma, address);
+ if (old_page) {
+ /*
+ * Only after switching the pte to the new page may
+ * we remove the mapcount here. Otherwise another
+ * process may come and find the rmap count decremented
+ * before the pte is switched to the new page, and
+ * "reuse" the old page writing into it while our pte
+ * here still points into it and can be read by other
+ * threads.
+ *
+ * The critical issue is to order this
+ * page_remove_rmap with the ptp_clear_flush above.
+ * Those stores are ordered by (if nothing else,)
+ * the barrier present in the atomic_add_negative
+ * in page_remove_rmap.
+ *
+ * Then the TLB flush in ptep_clear_flush ensures that
+ * no process can access the old page before the
+ * decremented mapcount is visible. And the old page
+ * cannot be reused until after the decremented
+ * mapcount is visible. So transitively, TLBs to
+ * old page will be flushed before it can be reused.
+ */
+ page_remove_rmap(old_page, vma);
+ }
+
/* Free the old page.. */
new_page = old_page;
ret |= VM_FAULT_WRITE;
diff --git a/mm/migrate.c b/mm/migrate.c
index 449d77d409f..112bcaeaa10 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -865,6 +865,11 @@ static int do_move_pages(struct mm_struct *mm, struct page_to_node *pm,
goto set_status;
page = follow_page(vma, pp->addr, FOLL_GET);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
if (!page)
goto set_status;
@@ -928,6 +933,11 @@ static int do_pages_stat(struct mm_struct *mm, struct page_to_node *pm)
goto set_status;
page = follow_page(vma, pm->addr, 0);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
/* Use PageReserved to check for zero page */
if (!page || PageReserved(page))
diff --git a/mm/slab.c b/mm/slab.c
index 06236e4ddc1..046607f05f3 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3263,9 +3263,12 @@ retry:
if (cpuset_zone_allowed_hardwall(zone, flags) &&
cache->nodelists[nid] &&
- cache->nodelists[nid]->free_objects)
+ cache->nodelists[nid]->free_objects) {
obj = ____cache_alloc_node(cache,
flags | GFP_THISNODE, nid);
+ if (obj)
+ break;
+ }
}
if (!obj) {
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 832a561500d..497df086141 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -441,12 +441,16 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
void __exit br_cleanup_bridges(void)
{
- struct net_device *dev, *nxt;
+ struct net_device *dev;
rtnl_lock();
- for_each_netdev_safe(&init_net, dev, nxt)
- if (dev->priv_flags & IFF_EBRIDGE)
+restart:
+ for_each_netdev(&init_net, dev) {
+ if (dev->priv_flags & IFF_EBRIDGE) {
del_br(dev->priv);
+ goto restart;
+ }
+ }
rtnl_unlock();
}
diff --git a/net/core/dev.c b/net/core/dev.c
index 472676dd550..bfa9a6a951d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -455,7 +455,7 @@ static int netdev_boot_setup_add(char *name, struct ifmap *map)
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
memset(s[i].name, 0, sizeof(s[i].name));
- strcpy(s[i].name, name);
+ strlcpy(s[i].name, name, IFNAMSIZ);
memcpy(&s[i].map, map, sizeof(s[i].map));
break;
}
@@ -480,7 +480,7 @@ int netdev_boot_setup_check(struct net_device *dev)
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
- !strncmp(dev->name, s[i].name, strlen(s[i].name))) {
+ !strcmp(dev->name, s[i].name)) {
dev->irq = s[i].map.irq;
dev->base_addr = s[i].map.base_addr;
dev->mem_start = s[i].map.mem_start;
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 1c2943a119f..79de3b14a8d 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -226,7 +226,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
ops = lookup_rules_ops(net, frh->family);
if (ops == NULL) {
- err = EAFNOSUPPORT;
+ err = -EAFNOSUPPORT;
goto errout;
}
@@ -365,7 +365,7 @@ static int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
ops = lookup_rules_ops(net, frh->family);
if (ops == NULL) {
- err = EAFNOSUPPORT;
+ err = -EAFNOSUPPORT;
goto errout;
}
diff --git a/net/core/filter.c b/net/core/filter.c
index 4f8369729a4..df374435583 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -68,7 +68,6 @@ static inline void *load_pointer(struct sk_buff *skb, int k,
* sk_filter - run a packet through a socket filter
* @sk: sock associated with &sk_buff
* @skb: buffer to filter
- * @needlock: set to 1 if the sock is not locked by caller.
*
* Run the filter code and then cut skb->data to correct size returned by
* sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index c66ac83316e..56a133c6145 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -253,6 +253,7 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/skbuff.h>
+#include <linux/scatterlist.h>
#include <linux/splice.h>
#include <linux/net.h>
#include <linux/socket.h>
@@ -1206,7 +1207,8 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc,
return -ENOTCONN;
while ((skb = tcp_recv_skb(sk, seq, &offset)) != NULL) {
if (offset < skb->len) {
- size_t used, len;
+ int used;
+ size_t len;
len = skb->len - offset;
/* Stop reading if we hit a patch of urgent data */
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index df0531c2814..1babb979fe0 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -95,6 +95,13 @@ static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr,
}
}
+ if (alg == ALG_WEP &&
+ key_len != LEN_WEP40 && key_len != LEN_WEP104) {
+ ieee80211_key_free(key);
+ err = -EINVAL;
+ goto out_unlock;
+ }
+
ieee80211_key_link(key, sdata, sta);
if (set_tx_key || (!sta && !sdata->default_key && key))
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index f23b5a4d4ac..ffe1af82fa4 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -308,8 +308,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd)
struct ieee80211_hw *hw = &local->hw;
int queue;
- tcf_destroy_chain(q->filter_list);
- q->filter_list = NULL;
+ tcf_destroy_chain(&q->filter_list);
for (queue = 0; queue < QD_NUM(hw); queue++) {
skb_queue_purge(&q->requeued[queue]);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 8db13fba10b..740acd6bc7d 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -331,12 +331,13 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph)
I. Upper bound for valid data: seq <= sender.td_maxend
II. Lower bound for valid data: seq + len >= sender.td_end - receiver.td_maxwin
- III. Upper bound for valid ack: sack <= receiver.td_end
- IV. Lower bound for valid ack: ack >= receiver.td_end - MAXACKWINDOW
+ III. Upper bound for valid (s)ack: sack <= receiver.td_end
+ IV. Lower bound for valid (s)ack: sack >= receiver.td_end - MAXACKWINDOW
- where sack is the highest right edge of sack block found in the packet.
+ where sack is the highest right edge of sack block found in the packet
+ or ack in the case of packet without SACK option.
- The upper bound limit for a valid ack is not ignored -
+ The upper bound limit for a valid (s)ack is not ignored -
we doesn't have to deal with fragments.
*/
@@ -606,12 +607,12 @@ static bool tcp_in_window(const struct nf_conn *ct,
before(seq, sender->td_maxend + 1),
after(end, sender->td_end - receiver->td_maxwin - 1),
before(sack, receiver->td_end + 1),
- after(ack, receiver->td_end - MAXACKWINDOW(sender)));
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1));
if (before(seq, sender->td_maxend + 1) &&
after(end, sender->td_end - receiver->td_maxwin - 1) &&
before(sack, receiver->td_end + 1) &&
- after(ack, receiver->td_end - MAXACKWINDOW(sender))) {
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)) {
/*
* Take into account window scaling (RFC 1323).
*/
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 6507c02dbe0..98bfe277eab 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -886,7 +886,7 @@ retry:
return netlink_unicast_kernel(sk, skb);
if (sk_filter(sk, skb)) {
- int err = skb->len;
+ err = skb->len;
kfree_skb(skb);
sock_put(sk);
return err;
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index c40773cdbe4..10f01ad0438 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1252,12 +1252,12 @@ void tcf_destroy(struct tcf_proto *tp)
kfree(tp);
}
-void tcf_destroy_chain(struct tcf_proto *fl)
+void tcf_destroy_chain(struct tcf_proto **fl)
{
struct tcf_proto *tp;
- while ((tp = fl) != NULL) {
- fl = tp->next;
+ while ((tp = *fl) != NULL) {
+ *fl = tp->next;
tcf_destroy(tp);
}
}
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 33527341638..db0e23ae85f 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -160,7 +160,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl)
*prev = flow->next;
pr_debug("atm_tc_put: qdisc %p\n", flow->q);
qdisc_destroy(flow->q);
- tcf_destroy_chain(flow->filter_list);
+ tcf_destroy_chain(&flow->filter_list);
if (flow->sock) {
pr_debug("atm_tc_put: f_count %d\n",
file_count(flow->sock->file));
@@ -586,10 +586,11 @@ static void atm_tc_destroy(struct Qdisc *sch)
struct atm_flow_data *flow;
pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p);
+ for (flow = p->flows; flow; flow = flow->next)
+ tcf_destroy_chain(&flow->filter_list);
+
/* races ? */
while ((flow = p->flows)) {
- tcf_destroy_chain(flow->filter_list);
- flow->filter_list = NULL;
if (flow->ref > 1)
printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow,
flow->ref);
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 09969c1fbc0..2a3c97f7dc6 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1704,7 +1704,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl)
BUG_TRAP(!cl->filters);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
qdisc_destroy(cl->q);
qdisc_put_rtab(cl->R_tab);
gen_kill_estimator(&cl->bstats, &cl->rate_est);
@@ -1728,10 +1728,8 @@ cbq_destroy(struct Qdisc* sch)
* be bound to classes which have been destroyed already. --TGR '04
*/
for (h = 0; h < 16; h++) {
- for (cl = q->classes[h]; cl; cl = cl->next) {
- tcf_destroy_chain(cl->filter_list);
- cl->filter_list = NULL;
- }
+ for (cl = q->classes[h]; cl; cl = cl->next)
+ tcf_destroy_chain(&cl->filter_list);
}
for (h = 0; h < 16; h++) {
struct cbq_class *next;
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 64465bacbe7..c4c1317cd47 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -416,7 +416,7 @@ static void dsmark_destroy(struct Qdisc *sch)
pr_debug("dsmark_destroy(sch %p,[qdisc %p])\n", sch, p);
- tcf_destroy_chain(p->filter_list);
+ tcf_destroy_chain(&p->filter_list);
qdisc_destroy(p->q);
kfree(p->mask);
}
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index fdfaa3fcc16..e817aa00441 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1123,7 +1123,7 @@ hfsc_destroy_class(struct Qdisc *sch, struct hfsc_class *cl)
{
struct hfsc_sched *q = qdisc_priv(sch);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
qdisc_destroy(cl->qdisc);
gen_kill_estimator(&cl->bstats, &cl->rate_est);
if (cl != &q->root)
@@ -1541,6 +1541,10 @@ hfsc_destroy_qdisc(struct Qdisc *sch)
unsigned int i;
for (i = 0; i < HFSC_HSIZE; i++) {
+ list_for_each_entry(cl, &q->clhash[i], hlist)
+ tcf_destroy_chain(&cl->filter_list);
+ }
+ for (i = 0; i < HFSC_HSIZE; i++) {
list_for_each_entry_safe(cl, next, &q->clhash[i], hlist)
hfsc_destroy_class(sch, cl);
}
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 2cef8f34b2c..0284791169c 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1236,7 +1236,7 @@ static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl)
qdisc_put_rtab(cl->rate);
qdisc_put_rtab(cl->ceil);
- tcf_destroy_chain(cl->filter_list);
+ tcf_destroy_chain(&cl->filter_list);
while (!list_empty(&cl->children))
htb_destroy_class(sch, list_entry(cl->children.next,
@@ -1265,7 +1265,7 @@ static void htb_destroy(struct Qdisc *sch)
and surprisingly it worked in 2.4. But it must precede it
because filter need its target class alive to be able to call
unbind_filter on it (without Oops). */
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
while (!list_empty(&q->root))
htb_destroy_class(sch, list_entry(q->root.next,
diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c
index 274b1ddb160..956c80ad596 100644
--- a/net/sched/sch_ingress.c
+++ b/net/sched/sch_ingress.c
@@ -104,7 +104,7 @@ static void ingress_destroy(struct Qdisc *sch)
{
struct ingress_qdisc_data *p = qdisc_priv(sch);
- tcf_destroy_chain(p->filter_list);
+ tcf_destroy_chain(&p->filter_list);
}
static int ingress_dump(struct Qdisc *sch, struct sk_buff *skb)
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 4aa2b45dad0..5532f1031ab 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -219,7 +219,7 @@ prio_destroy(struct Qdisc* sch)
int prio;
struct prio_sched_data *q = qdisc_priv(sch);
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
for (prio=0; prio<q->bands; prio++)
qdisc_destroy(q->queues[prio]);
}
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index f0463d757a9..6a97afbfb95 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -520,7 +520,7 @@ static void sfq_destroy(struct Qdisc *sch)
{
struct sfq_sched_data *q = qdisc_priv(sch);
- tcf_destroy_chain(q->filter_list);
+ tcf_destroy_chain(&q->filter_list);
q->perturb_period = 0;
del_timer_sync(&q->perturb_timer);
}
diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c
index 91d14224f6b..73d4572d136 100644
--- a/sound/isa/sb/sb_mixer.c
+++ b/sound/isa/sb/sb_mixer.c
@@ -925,7 +925,7 @@ static unsigned char als4000_saved_regs[] = {
static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
*val++ = snd_sbmixer_read(chip, *regs++);
}
@@ -933,7 +933,7 @@ static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
static void restore_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
snd_sbmixer_write(chip, *regs++, *val++);
}
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index 56f87cd33c1..3f00ddf450f 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -316,6 +316,8 @@ static int __devinit snd_aw2_create(struct snd_card *card,
return -ENOMEM;
}
+ /* (2) initialization of the chip hardware */
+ snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
if (request_irq(pci->irq, snd_aw2_saa7146_interrupt,
IRQF_SHARED, "Audiowerk2", chip)) {
@@ -329,8 +331,6 @@ static int __devinit snd_aw2_create(struct snd_card *card,
}
chip->irq = pci->irq;
- /* (2) initialization of the chip hardware */
- snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
free_irq(chip->irq, (void *)chip);
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index cc0cddadd58..6facac5aed9 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -936,11 +936,13 @@ static int add_controls(struct oxygen *chip,
for (i = 0; i < count; ++i) {
template = controls[i];
- err = chip->model->control_filter(&template);
- if (err < 0)
- return err;
- if (err == 1)
- continue;
+ if (chip->model->control_filter) {
+ err = chip->model->control_filter(&template);
+ if (err < 0)
+ return err;
+ if (err == 1)
+ continue;
+ }
if (!strcmp(template.name, "Master Playback Volume") &&
chip->model->dac_tlv) {
template.tlv.p = chip->model->dac_tlv;
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 98778cb69c6..1dcf9f3d110 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -269,28 +269,9 @@ void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
}
}
-static int get_eoi_gsi(struct kvm_ioapic *ioapic, int vector)
+static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi)
{
- int i;
-
- for (i = 0; i < IOAPIC_NUM_PINS; i++)
- if (ioapic->redirtbl[i].fields.vector == vector)
- return i;
- return -1;
-}
-
-void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
-{
- struct kvm_ioapic *ioapic = kvm->arch.vioapic;
union ioapic_redir_entry *ent;
- int gsi;
-
- gsi = get_eoi_gsi(ioapic, vector);
- if (gsi == -1) {
- printk(KERN_WARNING "Can't find redir item for %d EOI\n",
- vector);
- return;
- }
ent = &ioapic->redirtbl[gsi];
ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
@@ -300,6 +281,16 @@ void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
ioapic_deliver(ioapic, gsi);
}
+void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
+{
+ struct kvm_ioapic *ioapic = kvm->arch.vioapic;
+ int i;
+
+ for (i = 0; i < IOAPIC_NUM_PINS; i++)
+ if (ioapic->redirtbl[i].fields.vector == vector)
+ __kvm_ioapic_update_eoi(ioapic, i);
+}
+
static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr)
{
struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private;