aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/kernel/time_64.c2
-rw-r--r--arch/x86/kernel/tsc_32.c2
-rw-r--r--include/linux/delay.h2
-rw-r--r--init/calibrate.c36
4 files changed, 22 insertions, 20 deletions
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 12b4a71bd07..39ae8511a13 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -123,7 +123,7 @@ void __init time_init(void)
(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
cpu_khz = calculate_cpu_khz();
- lpj_tsc = ((unsigned long)tsc_khz * 1000)/HZ;
+ lpj_fine = ((unsigned long)tsc_khz * 1000)/HZ;
if (unsynchronized_tsc())
mark_tsc_unstable("TSCs unsynchronized");
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 0af49fb533e..048baab7726 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -425,7 +425,7 @@ void __init tsc_init(void)
lpj = ((u64)tsc_khz * 1000);
do_div(lpj, HZ);
- lpj_tsc = lpj;
+ lpj_fine = lpj;
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
diff --git a/include/linux/delay.h b/include/linux/delay.h
index 01aec60590a..fd832c6d419 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -41,7 +41,7 @@ static inline void ndelay(unsigned long x)
#define ndelay(x) ndelay(x)
#endif
-extern unsigned long lpj_tsc;
+extern unsigned long lpj_fine;
void calibrate_delay(void);
void msleep(unsigned int msecs);
unsigned long msleep_interruptible(unsigned int msecs);
diff --git a/init/calibrate.c b/init/calibrate.c
index 86286974dad..7963e3fc51d 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -10,7 +10,7 @@
#include <linux/timex.h>
#include <linux/smp.h>
-unsigned long lpj_tsc;
+unsigned long lpj_fine;
unsigned long preset_lpj;
static int __init lpj_setup(char *str)
{
@@ -35,9 +35,9 @@ static unsigned long __cpuinit calibrate_delay_direct(void)
unsigned long pre_start, start, post_start;
unsigned long pre_end, end, post_end;
unsigned long start_jiffies;
- unsigned long tsc_rate_min, tsc_rate_max;
- unsigned long good_tsc_sum = 0;
- unsigned long good_tsc_count = 0;
+ unsigned long timer_rate_min, timer_rate_max;
+ unsigned long good_timer_sum = 0;
+ unsigned long good_timer_count = 0;
int i;
if (read_current_timer(&pre_start) < 0 )
@@ -81,22 +81,24 @@ static unsigned long __cpuinit calibrate_delay_direct(void)
}
read_current_timer(&post_end);
- tsc_rate_max = (post_end - pre_start) / DELAY_CALIBRATION_TICKS;
- tsc_rate_min = (pre_end - post_start) / DELAY_CALIBRATION_TICKS;
+ timer_rate_max = (post_end - pre_start) /
+ DELAY_CALIBRATION_TICKS;
+ timer_rate_min = (pre_end - post_start) /
+ DELAY_CALIBRATION_TICKS;
/*
- * If the upper limit and lower limit of the tsc_rate is
+ * If the upper limit and lower limit of the timer_rate is
* >= 12.5% apart, redo calibration.
*/
if (pre_start != 0 && pre_end != 0 &&
- (tsc_rate_max - tsc_rate_min) < (tsc_rate_max >> 3)) {
- good_tsc_count++;
- good_tsc_sum += tsc_rate_max;
+ (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) {
+ good_timer_count++;
+ good_timer_sum += timer_rate_max;
}
}
- if (good_tsc_count)
- return (good_tsc_sum/good_tsc_count);
+ if (good_timer_count)
+ return (good_timer_sum/good_timer_count);
printk(KERN_WARNING "calibrate_delay_direct() failed to get a good "
"estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");
@@ -111,8 +113,8 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;}
* bit takes on average 1.5/HZ seconds. This (like the original) is a little
* better than 1%
* For the boot cpu we can skip the delay calibration and assign it a value
- * calculated based on the tsc frequency.
- * For the rest of the CPUs we cannot assume that the tsc frequency is same as
+ * calculated based on the timer frequency.
+ * For the rest of the CPUs we cannot assume that the timer frequency is same as
* the cpu frequency, hence do the calibration for those.
*/
#define LPS_PREC 8
@@ -126,11 +128,11 @@ void __cpuinit calibrate_delay(void)
loops_per_jiffy = preset_lpj;
printk(KERN_INFO
"Calibrating delay loop (skipped) preset value.. ");
- } else if ((smp_processor_id() == 0) && lpj_tsc) {
- loops_per_jiffy = lpj_tsc;
+ } else if ((smp_processor_id() == 0) && lpj_fine) {
+ loops_per_jiffy = lpj_fine;
printk(KERN_INFO
"Calibrating delay loop (skipped), "
- "using tsc calculated value.. ");
+ "value calculated using timer frequency.. ");
} else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) {
printk(KERN_INFO
"Calibrating delay using timer specific routine.. ");