aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Samsung-S3C24XX/Overview.txt35
-rw-r--r--Documentation/arm/Samsung-S3C24XX/S3C2412.txt120
-rw-r--r--Documentation/arm/Samsung-S3C24XX/S3C2413.txt21
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/boot/compressed/head-at91rm9200.S6
-rw-r--r--arch/arm/boot/compressed/ll_char_wr.S6
-rw-r--r--arch/arm/configs/onearm_defconfig1053
-rw-r--r--arch/arm/configs/s3c2410_defconfig50
-rw-r--r--arch/arm/kernel/entry-common.S2
-rw-r--r--arch/arm/kernel/head-nommu.S2
-rw-r--r--arch/arm/kernel/head.S4
-rw-r--r--arch/arm/lib/backtrace.S8
-rw-r--r--arch/arm/lib/clear_user.S4
-rw-r--r--arch/arm/lib/copy_page.S2
-rw-r--r--arch/arm/lib/csumipv6.S2
-rw-r--r--arch/arm/lib/delay.S18
-rw-r--r--arch/arm/lib/ecard.S4
-rw-r--r--arch/arm/lib/findbit.S10
-rw-r--r--arch/arm/lib/io-readsb.S6
-rw-r--r--arch/arm/lib/io-readsw-armv3.S6
-rw-r--r--arch/arm/lib/io-writesb.S6
-rw-r--r--arch/arm/lib/io-writesw-armv3.S6
-rw-r--r--arch/arm/lib/memchr.S2
-rw-r--r--arch/arm/lib/memset.S4
-rw-r--r--arch/arm/lib/memzero.S4
-rw-r--r--arch/arm/lib/strchr.S2
-rw-r--r--arch/arm/lib/strncpy_from_user.S5
-rw-r--r--arch/arm/lib/strnlen_user.S5
-rw-r--r--arch/arm/lib/strrchr.S2
-rw-r--r--arch/arm/lib/uaccess.S8
-rw-r--r--arch/arm/mach-at91rm9200/Kconfig6
-rw-r--r--arch/arm/mach-at91rm9200/Makefile1
-rw-r--r--arch/arm/mach-at91rm9200/board-1arm.c109
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig3
-rw-r--r--arch/arm/mach-ixp4xx/Makefile24
-rw-r--r--arch/arm/mach-pxa/sleep.S2
-rw-r--r--arch/arm/mach-s3c2410/Kconfig4
-rw-r--r--arch/arm/mach-s3c2410/sleep.S2
-rw-r--r--arch/arm/mach-sa1100/sleep.S2
-rw-r--r--arch/arm/mm/copypage-v3.S2
-rw-r--r--arch/arm/mm/proc-v6.S32
-rw-r--r--arch/arm/nwfpe/entry26.S2
-rw-r--r--arch/arm/tools/mach-types71
-rw-r--r--drivers/mfd/ucb1x00-core.c4
-rw-r--r--include/asm-arm/assembler.h36
45 files changed, 1515 insertions, 192 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 8c6ee684174..3e46d2a3115 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -7,11 +7,13 @@ Introduction
------------
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
- by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
- the S3C2440 are supported CPUs.
+ by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
+ S3C2440 and S3C2442 devices are supported.
Support for the S3C2400 series is in progress.
+ Support for the S3C2412 and S3C2413 CPUs is being merged.
+
Configuration
-------------
@@ -43,9 +45,18 @@ Machines
Samsung's own development board, geared for PDA work.
+ Samsung/Aiji SMDK2412
+
+ The S3C2412 version of the SMDK2440.
+
+ Samsung/Aiji SMDK2413
+
+ The S3C2412 version of the SMDK2440.
+
Samsung/Meritech SMDK2440
- The S3C2440 compatible version of the SMDK2440
+ The S3C2440 compatible version of the SMDK2440, which has the
+ option of an S3C2440 or S3C2442 CPU module.
Thorcom VR1000
@@ -211,24 +222,6 @@ Port Contributors
Lucas Correia Villa Real (S3C2400 port)
-Document Changes
-----------------
-
- 05 Sep 2004 - BJD - Added Document Changes section
- 05 Sep 2004 - BJD - Added Klaus Fetscher to list of contributors
- 25 Oct 2004 - BJD - Added Dimitry Andric to list of contributors
- 25 Oct 2004 - BJD - Updated the MTD from the 2.6.9 merge
- 21 Jan 2005 - BJD - Added rx3715, added Shannon to contributors
- 10 Feb 2005 - BJD - Added Guillaume Gourat to contributors
- 02 Mar 2005 - BJD - Added SMDK2440 to list of machines
- 06 Mar 2005 - BJD - Added Christer Weinigel
- 08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
- 08 Mar 2005 - BJD - Added section on adding machines
- 09 Sep 2005 - BJD - Added section on platform data
- 11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections
- 11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information
-
-
Document Author
---------------
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
new file mode 100644
index 00000000000..cb82a7fc790
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -0,0 +1,120 @@
+ S3C2412 ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
+ from Samsung. This part has an ARM926-EJS core, capable of running up
+ to 266MHz (see data-sheet for more information)
+
+
+Clock
+-----
+
+ The core clock code provides a set of clocks to the drivers, and allows
+ for source selection and a number of other features.
+
+
+Power
+-----
+
+ No support for suspend/resume to RAM in the current system.
+
+
+DMA
+---
+
+ No current support for DMA.
+
+
+GPIO
+----
+
+ There is support for setting the GPIO to input/output/special function
+ and reading or writing to them.
+
+
+UART
+----
+
+ The UART hardware is similar to the S3C2440, and is supported by the
+ s3c2410 driver in the drivers/serial directory.
+
+
+NAND
+----
+
+ The NAND hardware is similar to the S3C2440, and is supported by the
+ s3c2410 driver in the drivers/mtd/nand directory.
+
+
+USB Host
+--------
+
+ The USB hardware is similar to the S3C2410, with extended clock source
+ control. The OHCI portion is supported by the ohci-s3c2410 driver, and
+ the clock control selection is supported by the core clock code.
+
+
+USB Device
+----------
+
+ No current support in the kernel
+
+
+IRQs
+----
+
+ All the standard, and external interrupt sources are supported. The
+ extra sub-sources are not yet supported.
+
+
+RTC
+---
+
+ The RTC hardware is similar to the S3C2410, and is supported by the
+ s3c2410-rtc driver.
+
+
+Watchdog
+--------
+
+ The watchdog harware is the same as the S3C2410, and is supported by
+ the s3c2410_wdt driver.
+
+
+MMC/SD/SDIO
+-----------
+
+ No current support for the MMC/SD/SDIO block.
+
+IIC
+---
+
+ The IIC hardware is the same as the S3C2410, and is supported by the
+ i2c-s3c24xx driver.
+
+
+IIS
+---
+
+ No current support for the IIS interface.
+
+
+SPI
+---
+
+ No current support for the SPI interfaces.
+
+
+ATA
+---
+
+ No current support for the on-board ATA block.
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
new file mode 100644
index 00000000000..ab2a88858f1
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
@@ -0,0 +1,21 @@
+ S3C2413 ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The S3C2413 is an extended version of the S3C2412, with an camera
+ interface and mobile DDR memory support. See the S3C2412 support
+ documentation for more information.
+
+
+Camera Interface
+---------------
+
+ This block is currently not supported.
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2006 Simtec Electronics
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1b7e5c2e90e..3d1a3fb7d5f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -253,7 +253,7 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -372,7 +372,7 @@ config ISA_DMA_API
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S
index 57a3b163b2c..d68b9acd826 100644
--- a/arch/arm/boot/compressed/head-at91rm9200.S
+++ b/arch/arm/boot/compressed/head-at91rm9200.S
@@ -61,6 +61,12 @@
cmp r7, r3
beq 99f
+ @ Ajeco 1ARM : 1075
+ mov r3, #(MACH_TYPE_ONEARM & 0xff)
+ orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
+ cmp r7, r3
+ beq 99f
+
@ Unknown board, use the AT91RM9200DK board
@ mov r7, #MACH_TYPE_AT91RM9200
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
index d7bbd9da2fc..8517c8606b4 100644
--- a/arch/arm/boot/compressed/ll_char_wr.S
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -77,7 +77,7 @@ Lrow4bpplp:
subne r1, r1, #1
ldrneb r7, [r6, r1]
bne Lrow4bpplp
- LOADREGS(fd, sp!, {r4 - r7, pc})
+ ldmfd sp!, {r4 - r7, pc}
@
@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
@@ -105,7 +105,7 @@ Lrow8bpplp:
subne r1, r1, #1
ldrneb r7, [r6, r1]
bne Lrow8bpplp
- LOADREGS(fd, sp!, {r4 - r7, pc})
+ ldmfd sp!, {r4 - r7, pc}
@
@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
@@ -127,7 +127,7 @@ Lrow1bpp:
strb r7, [r0], r5
mov r7, r7, lsr #8
strb r7, [r0], r5
- LOADREGS(fd, sp!, {r4 - r7, pc})
+ ldmfd sp!, {r4 - r7, pc}
.bss
ENTRY(con_charconvtable)
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
new file mode 100644
index 00000000000..5401c01caef
--- /dev/null
+++ b/arch/arm/configs/onearm_defconfig
@@ -0,0 +1,1053 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-git10
+# Mon Jun 26 13:45:44 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+CONFIG_MACH_ONEARM=y
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KAFA is not set
+
+#
+# AT91RM9200 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91RM9200=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index e1766138009..f20814e6f49 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Tue Jun 20 18:57:01 2006
+# Linux kernel version: 2.6.17-git9
+# Sun Jun 25 23:56:32 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -49,7 +49,6 @@ CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -81,18 +80,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -100,14 +107,6 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_NETX is not set
#
# S3C24XX Implementations
@@ -123,11 +122,14 @@ CONFIG_ARCH_SMDK2410=y
CONFIG_ARCH_S3C2440=y
CONFIG_SMDK2440_CPU2440=y
CONFIG_SMDK2440_CPU2442=y
+CONFIG_MACH_SMDK2413=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_RX3715=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_NEXCODER_2440=y
+CONFIG_S3C2410_CLOCK=y
CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2412=y
CONFIG_CPU_S3C244X=y
CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C2442=y
@@ -153,8 +155,11 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
+CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v4=y
+CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
@@ -167,6 +172,7 @@ CONFIG_CPU_TLB_V4WBI=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
#
# Bus support
@@ -214,6 +220,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
#
# Userspace binary formats
@@ -242,6 +249,8 @@ CONFIG_NET=y
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -260,6 +269,8 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -267,6 +278,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -321,6 +333,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -408,10 +421,12 @@ CONFIG_MTD_BAST_MAXSIZE=4
#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
# CONFIG_MTD_NAND_S3C2410_HWECC is not set
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
@@ -425,8 +440,8 @@ CONFIG_MTD_NAND_S3C2410=y
#
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
@@ -735,6 +750,7 @@ CONFIG_I2C_ALGOBIT=m
#
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_ISA=m
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
@@ -765,13 +781,13 @@ CONFIG_SENSORS_EEPROM=m
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -799,8 +815,10 @@ CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
@@ -845,6 +863,7 @@ CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
@@ -976,10 +995,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
@@ -1024,6 +1045,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b5bcebca1cd..75af6d6e2f2 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -340,7 +340,7 @@ sys_mmap2:
streq r5, [sp, #4]
beq do_mmap2
mov r0, #-EINVAL
- RETINSTR(mov,pc, lr)
+ mov pc, lr
#else
str r5, [sp, #4]
b do_mmap2
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index adf62e5eaad..2af7e44218a 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -39,7 +39,7 @@
__INIT
.type stext, %function
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 04f7344e356..330b9476c39 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -71,7 +71,7 @@
__INIT
.type stext, %function
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
@@ -104,7 +104,7 @@ ENTRY(secondary_startup)
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 16153c86c3f..058b80d72aa 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -41,7 +41,7 @@ ENTRY(c_backtrace)
movne r0, #0
movs frame, r0
1: moveq r0, #-2
- LOADREGS(eqfd, sp!, {r4 - r8, pc})
+ ldmeqfd sp!, {r4 - r8, pc}
2: stmfd sp!, {pc} @ calculate offset of PC in STMIA instruction
ldr r0, [sp], #4
@@ -85,7 +85,7 @@ ENTRY(c_backtrace)
* A zero next framepointer means we're done.
*/
teq next, #0
- LOADREGS(eqfd, sp!, {r4 - r8, pc})
+ ldmeqfd sp!, {r4 - r8, pc}
/*
* The next framepointer must be above the
@@ -104,7 +104,7 @@ ENTRY(c_backtrace)
1007: ldr r0, =.Lbad
mov r1, frame
bl printk
- LOADREGS(fd, sp!, {r4 - r8, pc})
+ ldmfd sp!, {r4 - r8, pc}
.ltorg
.previous
@@ -145,7 +145,7 @@ ENTRY(c_backtrace)
adrne r0, .Lcr
blne printk
mov r0, stack
- LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc})
+ ldmfd sp!, {instr, reg, stack, r7, r8, pc}
.Lfp: .asciz " r%d = %08X%c"
.Lcr: .asciz "\n"
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 7ff9f831b3f..ea435ae2e4a 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -43,10 +43,10 @@ USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
mov r0, #0
- LOADREGS(fd,sp!, {r1, pc})
+ ldmfd sp!, {r1, pc}
.section .fixup,"ax"
.align 0
-9001: LOADREGS(fd,sp!, {r0, pc})
+9001: ldmfd sp!, {r0, pc}
.previous
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 68117968482..666c99cc074 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -43,4 +43,4 @@ ENTRY(copy_page)
bgt 1b @ 1
PLD( ldmeqia r1!, {r3, r4, ip, lr} )
PLD( beq 2b )
- LOADREGS(fd, sp!, {r4, pc}) @ 3
+ ldmfd sp!, {r4, pc} @ 3
diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S
index 7065a20ee8a..9621469beec 100644
--- a/arch/arm/lib/csumipv6.S
+++ b/arch/arm/lib/csumipv6.S
@@ -28,5 +28,5 @@ ENTRY(__csum_ipv6_magic)
adcs r0, r0, r3
adcs r0, r0, r2
adcs r0, r0, #0
- LOADREGS(fd, sp!, {pc})
+ ldmfd sp!, {pc}
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index 9183b06c0e2..930a7025922 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -31,7 +31,7 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
mov r2, r2, lsr #10 @ max = 0x00007fff
mul r0, r2, r0 @ max = 2^32-1
movs r0, r0, lsr #6
- RETINSTR(moveq,pc,lr)
+ moveq pc, lr
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
@@ -43,20 +43,20 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
ENTRY(__delay)
subs r0, r0, #1
#if 0
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
- RETINSTR(movls,pc,lr)
+ movls pc, lr
subs r0, r0, #1
#endif
bhi __delay
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index fb7b602a6f7..c55aaa2a208 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -29,7 +29,7 @@ ENTRY(ecard_loader_read)
CPSR2SPSR(r0)
mov lr, pc
mov pc, r2
- LOADREGS(fd, sp!, {r4 - r12, pc})
+ ldmfd sp!, {r4 - r12, pc}
@ Purpose: call an expansion card loader to reset the card
@ Proto : void read_loader(int card_base, char *loader);
@@ -41,5 +41,5 @@ ENTRY(ecard_loader_reset)
CPSR2SPSR(r0)
mov lr, pc
add pc, r1, #8
- LOADREGS(fd, sp!, {r4 - r12, pc})
+ ldmfd sp!, {r4 - r12, pc}
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 6f8e27a58c7..a5ca0248aa4 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -32,7 +32,7 @@ ENTRY(_find_first_zero_bit_le)
2: cmp r2, r1 @ any more?
blo 1b
3: mov r0, r1 @ no free bits
- RETINSTR(mov,pc,lr)
+ mov pc, lr
/*
* Purpose : Find next 'zero' bit
@@ -66,7 +66,7 @@ ENTRY(_find_first_bit_le)
2: cmp r2, r1 @ any more?
blo 1b
3: mov r0, r1 @ no free bits
- RETINSTR(mov,pc,lr)
+ mov pc, lr
/*
* Purpose : Find next 'one' bit
@@ -98,7 +98,7 @@ ENTRY(_find_first_zero_bit_be)
2: cmp r2, r1 @ any more?
blo 1b
3: mov r0, r1 @ no free bits
- RETINSTR(mov,pc,lr)
+ mov pc, lr
ENTRY(_find_next_zero_bit_be)
teq r1, #0
@@ -126,7 +126,7 @@ ENTRY(_find_first_bit_be)
2: cmp r2, r1 @ any more?
blo 1b
3: mov r0, r1 @ no free bits
- RETINSTR(mov,pc,lr)
+ mov pc, lr
ENTRY(_find_next_bit_be)
teq r1, #0
@@ -164,5 +164,5 @@ ENTRY(_find_next_bit_be)
addeq r2, r2, #1
mov r0, r2
#endif
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S
index d3d8de71a2c..fb966ad0276 100644
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@@ -72,7 +72,7 @@ ENTRY(__raw_readsb)
bpl .Linsb_16_lp
tst r2, #15
- LOADREGS(eqfd, sp!, {r4 - r6, pc})
+ ldmeqfd sp!, {r4 - r6, pc}
.Linsb_no_16: tst r2, #8
beq .Linsb_no_8
@@ -109,7 +109,7 @@ ENTRY(__raw_readsb)
str r3, [r1], #4
.Linsb_no_4: ands r2, r2, #3
- LOADREGS(eqfd, sp!, {r4 - r6, pc})
+ ldmeqfd sp!, {r4 - r6, pc}
cmp r2, #2
ldrb r3, [r0]
@@ -119,4 +119,4 @@ ENTRY(__raw_readsb)
ldrgtb r3, [r0]
strgtb r3, [r1]
- LOADREGS(fd, sp!, {r4 - r6, pc})
+ ldmfd sp!, {r4 - r6, pc}
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 146d47c1545..4ef90418514 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -28,7 +28,7 @@
strb r3, [r1], #1
subs r2, r2, #1
- RETINSTR(moveq, pc, lr)
+ moveq pc, lr
ENTRY(__raw_readsw)
teq r2, #0 @ do we have to check for the zero len?
@@ -69,7 +69,7 @@ ENTRY(__raw_readsw)
bpl .Linsw_8_lp
tst r2, #7
- LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
+ ldmeqfd sp!, {r4, r5, r6, pc}
.Lno_insw_8: tst r2, #4
beq .Lno_insw_4
@@ -102,6 +102,6 @@ ENTRY(__raw_readsw)
movne r3, r3, lsr #8
strneb r3, [r1]
- LOADREGS(fd, sp!, {r4, r5, r6, pc})
+ ldmfd sp!, {r4, r5, r6, pc}
diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S
index 08209fc640e..7eba2b6cc69 100644
--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@@ -64,7 +64,7 @@ ENTRY(__raw_writesb)
bpl .Loutsb_16_lp
tst r2, #15
- LOADREGS(eqfd, sp!, {r4, r5, pc})
+ ldmeqfd sp!, {r4, r5, pc}
.Loutsb_no_16: tst r2, #8
beq .Loutsb_no_8
@@ -80,7 +80,7 @@ ENTRY(__raw_writesb)
outword r3
.Loutsb_no_4: ands r2, r2, #3
- LOADREGS(eqfd, sp!, {r4, r5, pc})
+ ldmeqfd sp!, {r4, r5, pc}
cmp r2, #2
ldrb r3, [r1], #1
@@ -90,4 +90,4 @@ ENTRY(__raw_writesb)
ldrgtb r3, [r1]
strgtb r3, [r0]
- LOADREGS(fd, sp!, {r4, r5, pc})
+ ldmfd sp!, {r4, r5, pc}
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 52d62b48129..1607a29f49b 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -29,7 +29,7 @@
orr r3, r3, r3, lsl #16
str r3, [r0]
subs r2, r2, #1
- RETINSTR(moveq, pc, lr)
+ moveq pc, lr
ENTRY(__raw_writesw)
teq r2, #0 @ do we have to check for the zero len?
@@ -80,7 +80,7 @@ ENTRY(__raw_writesw)
bpl .Loutsw_8_lp
tst r2, #7
- LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
+ ldmeqfd sp!, {r4, r5, r6, pc}
.Lno_outsw_8: tst r2, #4
beq .Lno_outsw_4
@@ -124,4 +124,4 @@ ENTRY(__raw_writesw)
orrne ip, ip, ip, lsr #16
strne ip, [r0]
- LOADREGS(fd, sp!, {r4, r5, r6, pc})
+ ldmfd sp!, {r4, r5, r6, pc}
diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S
index ac34fe55d21..e7ab1ea8eba 100644
--- a/arch/arm/lib/memchr.S
+++ b/arch/arm/lib/memchr.S
@@ -22,4 +22,4 @@ ENTRY(memchr)
bne 1b
sub r0, r0, #1
2: movne r0, #0
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index a1795f59993..95b110b07a8 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -53,7 +53,7 @@ ENTRY(memset)
stmgeia r0!, {r1, r3, ip, lr}
stmgeia r0!, {r1, r3, ip, lr}
bgt 2b
- LOADREGS(eqfd, sp!, {pc}) @ Now <64 bytes to go.
+ ldmeqfd sp!, {pc} @ Now <64 bytes to go.
/*
* No need to correct the count; we're only testing bits from now on
*/
@@ -77,4 +77,4 @@ ENTRY(memset)
strneb r1, [r0], #1
tst r2, #1
strneb r1, [r0], #1
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index 51ccc60160f..abf2508e822 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -53,7 +53,7 @@ ENTRY(__memzero)
stmgeia r0!, {r2, r3, ip, lr} @ 4
stmgeia r0!, {r2, r3, ip, lr} @ 4
bgt 3b @ 1
- LOADREGS(eqfd, sp!, {pc}) @ 1/2 quick exit
+ ldmeqfd sp!, {pc} @ 1/2 quick exit
/*
* No need to correct the count; we're only testing bits from now on
*/
@@ -77,4 +77,4 @@ ENTRY(__memzero)
strneb r2, [r0], #1 @ 1
tst r1, #1 @ 1 a byte left over
strneb r2, [r0], #1 @ 1
- RETINSTR(mov,pc,lr) @ 1
+ mov pc, lr @ 1
diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S
index 5b9b493733f..9f18d6fdee6 100644
--- a/arch/arm/lib/strchr.S
+++ b/arch/arm/lib/strchr.S
@@ -23,4 +23,4 @@ ENTRY(strchr)
teq r2, r1
movne r0, #0
subeq r0, r0, #1
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 629cc877527..35649f04fca 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -21,7 +21,6 @@
* -EFAULT on exception, or "len" if we fill the whole buffer
*/
ENTRY(__arch_strncpy_from_user)
- save_lr
mov ip, r1
1: subs r2, r2, #1
USER( ldrplbt r3, [r1], #1)
@@ -31,13 +30,13 @@ USER( ldrplbt r3, [r1], #1)
bne 1b
sub r1, r1, #1 @ take NUL character out of count
2: sub r0, r1, ip
- restore_pc
+ mov pc, lr
.section .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
- restore_pc
+ mov pc, lr
.previous
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 67bcd826812..3668a15991e 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -21,7 +21,6 @@
* or zero on exception, or n + 1 if too long
*/
ENTRY(__arch_strnlen_user)
- save_lr
mov r2, r0
1:
USER( ldrbt r3, [r0], #1)
@@ -31,10 +30,10 @@ USER( ldrbt r3, [r0], #1)
bne 1b
add r0, r0, #1
2: sub r0, r0, r2
- restore_pc
+ mov pc, lr
.section .fixup,"ax"
.align 0
9001: mov r0, #0
- restore_pc
+ mov pc, lr
.previous
diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S
index fa923f026f1..538df220aa4 100644
--- a/arch/arm/lib/strrchr.S
+++ b/arch/arm/lib/strrchr.S
@@ -22,4 +22,4 @@ ENTRY(strrchr)
teq r2, #0
bne 1b
mov r0, r3
- RETINSTR(mov,pc,lr)
+ mov pc, lr
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index 0cc450f863b..1f1545d737b 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -105,7 +105,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
movs ip, r2
bne .Lc2u_nowords
.Lc2u_finished: mov r0, #0
- LOADREGS(fd,sp!,{r2, r4 - r7, pc})
+ ldmfd sp!, {r2, r4 - r7, pc}
.Lc2u_src_not_aligned:
bic r1, r1, #3
@@ -280,7 +280,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
.section .fixup,"ax"
.align 0
-9001: LOADREGS(fd,sp!, {r0, r4 - r7, pc})
+9001: ldmfd sp!, {r0, r4 - r7, pc}
.previous
/* Prototype: unsigned long __arch_copy_from_user(void *to,const void *from,unsigned long n);
@@ -369,7 +369,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
bne .Lcfu_nowords
.Lcfu_finished: mov r0, #0
add sp, sp, #8
- LOADREGS(fd,sp!,{r4 - r7, pc})
+ ldmfd sp!, {r4 - r7, pc}
.Lcfu_src_not_aligned:
bic r1, r1, #3
@@ -556,6 +556,6 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
movne r1, r4
blne __memzero
mov r0, r4
- LOADREGS(fd,sp!, {r4 - r7, pc})
+ ldmfd sp!, {r4 - r7, pc}
.previous
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 1ab5b782831..70d402f76ce 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -4,6 +4,12 @@ menu "AT91RM9200 Implementations"
comment "AT91RM9200 Board Type"
+config MACH_ONEARM
+ bool "Ajeco 1ARM Single Board Computer"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer
+
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index 81ebc6684ad..82db957322d 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -10,6 +10,7 @@ obj- :=
obj-$(CONFIG_PM) += pm.o
# Board-specific support
+obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c
new file mode 100644
index 00000000000..dc79e0992af
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-1arm.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+static void __init onearm_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(PQFP_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata onearm_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 3,
+ .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
+};
+
+static void __init onearm_map_io(void)
+{
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 18.432 MHz crystal */
+ at91_clock_init(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&onearm_uart_config);
+}
+
+static struct at91_eth_data __initdata onearm_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata onearm_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata onearm_udc_data = {
+ .vbus_pin = AT91_PIN_PC2,
+ .pullup_pin = AT91_PIN_PC3,
+};
+
+static void __init onearm_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&onearm_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&onearm_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&onearm_udc_data);
+}
+
+MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = onearm_map_io,
+ .init_irq = onearm_init_irq,
+ .init_machine = onearm_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 3b23f43cb16..57f23b46539 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -35,7 +35,6 @@ config ARCH_ADI_COYOTE
config ARCH_IXDP425
bool "IXDP425"
- select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
@@ -43,7 +42,6 @@ config ARCH_IXDP425
config MACH_IXDPG425
bool "IXDPG425"
- select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
@@ -51,7 +49,6 @@ config MACH_IXDPG425
config MACH_IXDP465
bool "IXDP465"
- select PCI
help
Say 'Y' here if you want your kernel to support Intel's
IXDP465 Development Platform (Also known as BMP).
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 5a4aaa0e0a0..640315d8b96 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -2,13 +2,23 @@
# Makefile for the linux kernel.
#
+obj-pci-y :=
+obj-pci-n :=
+
+obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
+obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
+obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
+obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+
obj-y += common.o
-obj-$(CONFIG_PCI) += common-pci.o
-obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o
-obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
-obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
-obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
+obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
+obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
+obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
+obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
+obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index c9862688ff3..0650bed3b96 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -189,7 +189,7 @@ ENTRY(pxa_cpu_suspend)
.data
.align 5
ENTRY(pxa_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC @ set SVC, irqs off
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
msr cpsr_c, r0
ldr r0, sleep_save_sp @ stack phys addr
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index f5d9cd498a5..b4171dd43df 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -71,13 +71,13 @@ config ARCH_S3C2440
Say Y here if you are using the SMDK2440.
config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 cpu module"
+ bool "SMDK2440 with S3C2440 CPU module"
depends on ARCH_S3C2440
default y if ARCH_S3C2440
select CPU_S3C2440
config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 cpu module"
+ bool "SMDM2440 with S3C2442 CPU module"
depends on ARCH_S3C2440
select CPU_S3C2442
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 5f6761ed96b..dc27167f4d5 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -128,7 +128,7 @@ s3c2410_sleep_save_phys:
*/
ENTRY(s3c2410_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
msr cpsr_c, r0
@@ load UART to allow us to print the two characters for
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 2fa1e289d17..5a84062f92a 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -177,7 +177,7 @@ sa1110_sdram_controller_fix:
.data
.align 5
ENTRY(sa1100_cpu_resume)
- mov r0, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+ mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, r0 @ set SVC, irqs off
ldr r0, sleep_save_sp @ stack phys addr
diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S
index 3c58ebbf035..2ee394b11bc 100644
--- a/arch/arm/mm/copypage-v3.S
+++ b/arch/arm/mm/copypage-v3.S
@@ -35,7 +35,7 @@ ENTRY(v3_copy_user_page)
stmia r0!, {r3, r4, ip, lr} @ 4
ldmneia r1!, {r3, r4, ip, lr} @ 4
bne 1b @ 1
- LOADREGS(fd, sp!, {r4, pc}) @ 3
+ ldmfd sp!, {r4, pc} @ 3
.align 5
/*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index ee6f1529873..09b1a41a6de 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -29,38 +29,6 @@
#define TTB_RGN_WT (2 << 3)
#define TTB_RGN_WB (3 << 3)
- .macro cpsie, flags
- .ifc \flags, f
- .long 0xf1080040
- .exitm
- .endif
- .ifc \flags, i
- .long 0xf1080080
- .exitm
- .endif
- .ifc \flags, if
- .long 0xf10800c0
- .exitm
- .endif
- .err
- .endm
-
- .macro cpsid, flags
- .ifc \flags, f
- .long 0xf10c0040
- .exitm
- .endif
- .ifc \flags, i
- .long 0xf10c0080
- .exitm
- .endif
- .ifc \flags, if
- .long 0xf10c00c0
- .exitm
- .endif
- .err
- .endm
-
ENTRY(cpu_v6_proc_init)
mov pc, lr
diff --git a/arch/arm/nwfpe/entry26.S b/arch/arm/nwfpe/entry26.S
index 51940a96d6a..3e6fb5d21d6 100644
--- a/arch/arm/nwfpe/entry26.S
+++ b/arch/arm/nwfpe/entry26.S
@@ -26,7 +26,7 @@
It is called from the kernel with code similar to this:
mov fp, #0
- teqp pc, #PSR_I_BIT | MODE_SVC
+ teqp pc, #PSR_I_BIT | SVC_MODE
ldr r4, .LC2
ldr pc, [r4] @ Call FP module USR entry point
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 6d7de9c0412..e1372a25311 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon May 8 20:11:05 2006
+# Last update: Mon Jun 26 22:26:08 2006
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -566,8 +566,8 @@ switchgrass MACH_SWITCHGRASS SWITCHGRASS 549
ens_cmu MACH_ENS_CMU ENS_CMU 550
mm6_sdb MACH_MM6_SDB MM6_SDB 551
saturn MACH_SATURN SATURN 552
-i30030evb MACH_ARGONPLUSEVB ARGONPLUSEVB 553
-mxc27530evb MACH_SCMA11EVB SCMA11EVB 554
+i30030evb MACH_I30030EVB I30030EVB 553
+mxc27530evb MACH_MXC27530EVB MXC27530EVB 554
smdk2800 MACH_SMDK2800 SMDK2800 555
mtwilson MACH_MTWILSON MTWILSON 556
ziti MACH_ZITI ZITI 557
@@ -647,7 +647,7 @@ sendt MACH_SENDT SENDT 630
mx2jazz MACH_MX2JAZZ MX2JAZZ 631
multiio MACH_MULTIIO MULTIIO 632
hrdisplay MACH_HRDISPLAY HRDISPLAY 633
-mxc27530ads MACH_SCMA11BB SCMA11BB 634
+mxc27530ads MACH_MXC27530ADS MXC27530ADS 634
trizeps3 MACH_TRIZEPS3 TRIZEPS3 635
zefeerdza MACH_ZEFEERDZA ZEFEERDZA 636
zefeerdzb MACH_ZEFEERDZB ZEFEERDZB 637
@@ -721,7 +721,7 @@ gp32 MACH_GP32 GP32 706
gem MACH_GEM GEM 707
i858 MACH_I858 I858 708
hx2750 MACH_HX2750 HX2750 709
-mxc91131evb MACH_ZEUSEVB ZEUSEVB 710
+mxc91131evb MACH_MXC91131EVB MXC91131EVB 710
p700 MACH_P700 P700 711
cpe MACH_CPE CPE 712
spitz MACH_SPITZ SPITZ 713
@@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787
rea9200 MACH_REA9200 REA9200 788
acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789
ixp425 MACH_IXP425 IXP425 790
-i30030ads MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791
+i30030ads MACH_I30030ADS I30030ADS 791
perch MACH_PERCH PERCH 792
eis05r1 MACH_EIS05R1 EIS05R1 793
pepperpad MACH_PEPPERPAD PEPPERPAD 794
@@ -930,7 +930,7 @@ netclient MACH_NETCLIENT NETCLIENT 916
xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917
xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918
omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919
-mxc30030evb MACH_ARGONLVEVB ARGONLVEVB 920
+mxc30030evb MACH_MXC30030EVB MXC30030EVB 920
rea_2d MACH_REA_2D REA_2D 921
eti3e524 MACH_TI3E524 TI3E524 922
ateb9200 MACH_ATEB9200 ATEB9200 923
@@ -986,7 +986,7 @@ redfox MACH_REDFOX REDFOX 972
mysh_ep9315_1 MACH_MYSH_EP9315_1 MYSH_EP9315_1 973
tpf106 MACH_TPF106 TPF106 974
at91rm9200kg MACH_AT91RM9200KG AT91RM9200KG 975
-racemt2 MACH_SLEDB SLEDB 976
+rcmt2 MACH_SLEDB SLEDB 976
ontrack MACH_ONTRACK ONTRACK 977
pm1200 MACH_PM1200 PM1200 978
ess24562 MACH_ESS24XXX ESS24XXX 979
@@ -1022,7 +1022,7 @@ smdk2440 MACH_SMDK2440 SMDK2440 1008
smdk2412 MACH_SMDK2412 SMDK2412 1009
webbox MACH_WEBBOX WEBBOX 1010
cwwndp MACH_CWWNDP CWWNDP 1011
-dragon MACH_DRAGON DRAGON 1012
+i839 MACH_DRAGON DRAGON 1012
opendo_cpu_board MACH_OPENDO_CPU_BOARD OPENDO_CPU_BOARD 1013
ccm2200 MACH_CCM2200 CCM2200 1014
etwarm MACH_ETWARM ETWARM 1015
@@ -1040,3 +1040,56 @@ edg79524 MACH_EDG79524 EDG79524 1026
ai2410 MACH_AI2410 AI2410 1027
ixp465 MACH_IXP465 IXP465 1028
balloon3 MACH_BALLOON3 BALLOON3 1029
+heins MACH_HEINS HEINS 1030
+mpluseva MACH_MPLUSEVA MPLUSEVA 1031
+rt042 MACH_RT042 RT042 1032
+cwiem MACH_CWIEM CWIEM 1033
+cm_x270 MACH_CM_X270 CM_X270 1034
+cm_x255 MACH_CM_X255 CM_X255 1035
+esh_at91 MACH_ESH_AT91 ESH_AT91 1036
+sandgate3 MACH_SANDGATE3 SANDGATE3 1037
+primo MACH_PRIMO PRIMO 1038
+gemstone MACH_GEMSTONE GEMSTONE 1039
+pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040
+sidewinder MACH_SIDEWINDER SIDEWINDER 1041
+picomod1 MACH_PICOMOD1 PICOMOD1 1042
+sg590 MACH_SG590 SG590 1043
+akai9307 MACH_AKAI9307 AKAI9307 1044
+fontaine MACH_FONTAINE FONTAINE 1045
+wombat MACH_WOMBAT WOMBAT 1046
+acq300 MACH_ACQ300 ACQ300 1047
+mod_270 MACH_MOD_270 MOD_270 1048
+vmc_vc0820 MACH_VC0820 VC0820 1049
+ani_aim MACH_ANI_AIM ANI_AIM 1050
+jellyfish MACH_JELLYFISH JELLYFISH 1051
+amanita MACH_AMANITA AMANITA 1052
+vlink MACH_VLINK VLINK 1053
+dexflex MACH_DEXFLEX DEXFLEX 1054
+eigen_ttq MACH_EIGEN_TTQ EIGEN_TTQ 1055
+arcom_titan MACH_ARCOM_TITAN ARCOM_TITAN 1056
+tabla MACH_TABLA TABLA 1057
+mdirac3 MACH_MDIRAC3 MDIRAC3 1058
+mrhfbp2 MACH_MRHFBP2 MRHFBP2 1059
+at91rm9200rb MACH_AT91RM9200RB AT91RM9200RB 1060
+ani_apm MACH_ANI_APM ANI_APM 1061
+ella1 MACH_ELLA1 ELLA1 1062
+inhand_pxa27x MACH_INHAND_PXA27X INHAND_PXA27X 1063
+inhand_pxa25x MACH_INHAND_PXA25X INHAND_PXA25X 1064
+empos_xm MACH_EMPOS_XM EMPOS_XM 1065
+empos MACH_EMPOS EMPOS 1066
+empos_tiny MACH_EMPOS_TINY EMPOS_TINY 1067
+empos_sm MACH_EMPOS_SM EMPOS_SM 1068
+egret MACH_EGRET EGRET 1069
+ostrich MACH_OSTRICH OSTRICH 1070
+n50 MACH_N50 N50 1071
+ecbat91 MACH_ECBAT91 ECBAT91 1072
+stareast MACH_STAREAST STAREAST 1073
+dspg_dw MACH_DSPG_DW DSPG_DW 1074
+onearm MACH_ONEARM ONEARM 1075
+mrg110_6 MACH_MRG110_6 MRG110_6 1076
+wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077
+xm_bulverde MACH_XM_BULVERDE XM_BULVERDE 1078
+msm6100 MACH_MSM6100 MSM6100 1079
+eti_b1 MACH_ETI_B1 ETI_B1 1080
+za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081
+bit2440 MACH_BIT2440 BIT2440 1082
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index aff83f96680..c8426a9bf27 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -420,8 +420,10 @@ static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
unsigned long mask;
mask = probe_irq_on();
- if (!mask)
+ if (!mask) {
+ probe_irq_off(mask);
return NO_IRQ;
+ }
/*
* Enable the ADC interrupt.
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
index d53bafa9bf1..fce83282082 100644
--- a/include/asm-arm/assembler.h
+++ b/include/asm-arm/assembler.h
@@ -55,30 +55,6 @@
#define PLD(code...)
#endif
-#define MODE_USR USR_MODE
-#define MODE_FIQ FIQ_MODE
-#define MODE_IRQ IRQ_MODE
-#define MODE_SVC SVC_MODE
-
-#define DEFAULT_FIQ MODE_FIQ
-
-/*
- * LOADREGS - ldm with PC in register list (eg, ldmfd sp!, {pc})
- */
-#ifdef __STDC__
-#define LOADREGS(cond, base, reglist...)\
- ldm##cond base,reglist
-#else
-#define LOADREGS(cond, base, reglist...)\
- ldm/**/cond base,reglist
-#endif
-
-/*
- * Build a return instruction for this processor type.
- */
-#define RETINSTR(instr, regs...)\
- instr regs
-
/*
* Enable and disable interrupts
*/
@@ -117,18 +93,6 @@
msr cpsr_c, \oldcpsr
.endm
-/*
- * These two are used to save LR/restore PC over a user-based access.
- * The old 26-bit architecture requires that we do. On 32-bit
- * architecture, we can safely ignore this requirement.
- */
- .macro save_lr
- .endm
-
- .macro restore_pc
- mov pc, lr
- .endm
-
#define USER(x...) \
9999: x; \
.section __ex_table,"a"; \