aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap1/pm.c9
-rw-r--r--arch/arm/mach-omap1/sleep.S161
2 files changed, 1 insertions, 169 deletions
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 64adb24ffb7..1a2a3715857 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -95,7 +95,6 @@ static struct kobj_attribute sleep_while_idle_attr =
#endif
-static void (*omap_sram_idle)(void) = NULL;
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
/*
@@ -676,23 +675,17 @@ static int __init omap_pm_init(void)
* memory the MPU can see when it wakes up.
*/
if (cpu_is_omap730()) {
- omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
- omap730_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
omap730_cpu_suspend_sz);
} else if (cpu_is_omap15xx()) {
- omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
- omap1510_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
omap1510_cpu_suspend_sz);
} else if (cpu_is_omap16xx()) {
- omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
- omap1610_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
omap1610_cpu_suspend_sz);
}
- if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
+ if (omap_sram_suspend == NULL) {
printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
return -ENODEV;
}
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index abef33d10f0..68f5b39030b 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -39,167 +39,6 @@
.text
-/*
- * Forces OMAP into idle state
- *
- * omapXXXX_idle_loop_suspend()
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- * wakes up it continues execution at the point it went to sleep.
- *
- * Note: Because of slightly different configuration values we have
- * processor specific functions here.
- */
-
-#if defined(CONFIG_ARCH_OMAP730)
-ENTRY(omap730_idle_loop_suspend)
-
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
-
- @ load base address of ARM_IDLECT1 and ARM_IDLECT2
- mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
- @ turn off clock domains
- @ get ARM_IDLECT2 into r2
- ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
- orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
- strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
- @ request ARM idle
- @ get ARM_IDLECT1 into r1
- ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
- orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff
- strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- mov r5, #IDLE_WAIT_CYCLES & 0xff
- orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_730: subs r5, r5, #1
- bne l_730
-/*
- * Let's wait for the next clock tick to wake us up.
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
-/*
- * omap730_idle_loop_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
- */
-
- @ restore ARM_IDLECT1 and ARM_IDLECT2 and return
- @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
- strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
-ENTRY(omap730_idle_loop_suspend_sz)
- .word . - omap730_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP730 */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-ENTRY(omap1510_idle_loop_suspend)
-
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
-
- @ load base address of ARM_IDLECT1 and ARM_IDLECT2
- mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
- @ turn off clock domains
- @ get ARM_IDLECT2 into r2
- ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
- orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
- strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
- @ request ARM idle
- @ get ARM_IDLECT1 into r1
- ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
- orr r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff
- strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- mov r5, #IDLE_WAIT_CYCLES & 0xff
- orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_1510: subs r5, r5, #1
- bne l_1510
-/*
- * Let's wait for the next clock tick to wake us up.
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
-/*
- * omap1510_idle_loop_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
- */
-
- @ restore ARM_IDLECT1 and ARM_IDLECT2 and return
- @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
- strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
-ENTRY(omap1510_idle_loop_suspend_sz)
- .word . - omap1510_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-ENTRY(omap1610_idle_loop_suspend)
-
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
-
- @ load base address of ARM_IDLECT1 and ARM_IDLECT2
- mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
- orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
- @ turn off clock domains
- @ get ARM_IDLECT2 into r2
- ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
- orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
- strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
- @ request ARM idle
- @ get ARM_IDLECT1 into r1
- ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
- orr r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff
- strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- mov r5, #IDLE_WAIT_CYCLES & 0xff
- orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_1610: subs r5, r5, #1
- bne l_1610
-/*
- * Let's wait for the next clock tick to wake us up.
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
-/*
- * omap1610_idle_loop_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
- */
-
- @ restore ARM_IDLECT1 and ARM_IDLECT2 and return
- @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
- strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
-ENTRY(omap1610_idle_loop_suspend_sz)
- .word . - omap1610_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP16XX */
/*
* Forces OMAP into deep sleep state