aboutsummaryrefslogtreecommitdiff
path: root/Documentation/i2c/chips/adm1025
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/i2c/chips/adm1025')
-rw-r--r--Documentation/i2c/chips/adm102551
1 files changed, 0 insertions, 51 deletions
diff --git a/Documentation/i2c/chips/adm1025 b/Documentation/i2c/chips/adm1025
deleted file mode 100644
index 39d2b781b5d..00000000000
--- a/Documentation/i2c/chips/adm1025
+++ /dev/null
@@ -1,51 +0,0 @@
-Kernel driver adm1025
-=====================
-
-Supported chips:
- * Analog Devices ADM1025, ADM1025A
- Prefix: 'adm1025'
- Addresses scanned: I2C 0x2c - 0x2e
- Datasheet: Publicly available at the Analog Devices website
- * Philips NE1619
- Prefix: 'ne1619'
- Addresses scanned: I2C 0x2c - 0x2d
- Datasheet: Publicly available at the Philips website
-
-The NE1619 presents some differences with the original ADM1025:
- * Only two possible addresses (0x2c - 0x2d).
- * No temperature offset register, but we don't use it anyway.
- * No INT mode for pin 16. We don't play with it anyway.
-
-Authors:
- Chen-Yuan Wu <gwu@esoft.com>,
- Jean Delvare <khali@linux-fr.org>
-
-Description
------------
-
-(This is from Analog Devices.) The ADM1025 is a complete system hardware
-monitor for microprocessor-based systems, providing measurement and limit
-comparison of various system parameters. Five voltage measurement inputs
-are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and
-the processor core voltage. The ADM1025 can monitor a sixth power-supply
-voltage by measuring its own VCC. One input (two pins) is dedicated to a
-remote temperature-sensing diode and an on-chip temperature sensor allows
-ambient temperature to be monitored.
-
-One specificity of this chip is that the pin 11 can be hardwired in two
-different manners. It can act as the +12V power-supply voltage analog
-input, or as the a fifth digital entry for the VID reading (bit 4). It's
-kind of strange since both are useful, and the reason for designing the
-chip that way is obscure at least to me. The bit 5 of the configuration
-register can be used to define how the chip is hardwired. Please note that
-it is not a choice you have to make as the user. The choice was already
-made by your motherboard's maker. If the configuration bit isn't set
-properly, you'll have a wrong +12V reading or a wrong VID reading. The way
-the driver handles that is to preserve this bit through the initialization
-process, assuming that the BIOS set it up properly beforehand. If it turns
-out not to be true in some cases, we'll provide a module parameter to force
-modes.
-
-This driver also supports the ADM1025A, which differs from the ADM1025
-only in that it has "open-drain VID inputs while the ADM1025 has on-chip
-100k pull-ups on the VID inputs". It doesn't make any difference for us.