aboutsummaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa/powersave.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/powersave.txt')
-rw-r--r--Documentation/sound/alsa/powersave.txt41
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/sound/alsa/powersave.txt b/Documentation/sound/alsa/powersave.txt
new file mode 100644
index 00000000000..9657e809922
--- /dev/null
+++ b/Documentation/sound/alsa/powersave.txt
@@ -0,0 +1,41 @@
+Notes on Power-Saving Mode
+==========================
+
+AC97 and HD-audio drivers have the automatic power-saving mode.
+This feature is enabled via Kconfig CONFIG_SND_AC97_POWER_SAVE
+and CONFIG_SND_HDA_POWER_SAVE options, respectively.
+
+With the automatic power-saving, the driver turns off the codec power
+appropriately when no operation is required. When no applications use
+the device and/or no analog loopback is set, the power disablement is
+done fully or partially. It'll save a certain power consumption, thus
+good for laptops (even for desktops).
+
+The time-out for automatic power-off can be specified via power_save
+module option of snd-ac97-codec and snd-hda-intel modules. Specify
+the time-out value in seconds. 0 means to disable the automatic
+power-saving. The default value of timeout is given via
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT and
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options. Setting this to 1
+(the minimum value) isn't recommended because many applications try to
+reopen the device frequently. 10 would be a good choice for normal
+operations.
+
+The power_save option is exported as writable. This means you can
+adjust the value via sysfs on the fly. For example, to turn on the
+automatic power-save mode with 10 seconds, write to
+/sys/modules/snd_ac97_codec/parameters/power_save (usually as root):
+
+ # echo 10 > /sys/modules/snd_ac97_codec/parameters/power_save
+
+
+Note that you might hear click noise/pop when changing the power
+state. Also, it often takes certain time to wake up from the
+power-down to the active state. These are often hardly to fix, so
+don't report extra bug reports unless you have a fix patch ;-)
+
+For HD-audio interface, there is another module option,
+power_save_controller. This enables/disables the power-save mode of
+the controller side. Setting this on may reduce a bit more power
+consumption, but might result in longer wake-up time and click noise.
+Try to turn it off when you experience such a thing too often.