aboutsummaryrefslogtreecommitdiff
path: root/Documentation/video4linux/cx18.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/video4linux/cx18.txt')
-rw-r--r--Documentation/video4linux/cx18.txt36
1 files changed, 15 insertions, 21 deletions
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 6842c262890..914cb7e734a 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,36 +1,30 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
-1) The only hardware currently supported is the Hauppauge HVR-1600
- card and the Compro VideoMate H900 (note that this card only
- supports analog input, it has no digital tuner!).
+1) Currently supported are:
-2) Some people have problems getting the i2c bus to work. Cause unknown.
- The symptom is that the eeprom cannot be read and the card is
- unusable.
+ - Hauppauge HVR-1600
+ - Compro VideoMate H900
+ - Yuan MPC718
+ - Conexant Raptor PAL/SECAM devkit
-3) The audio from the analog tuner is mono only. Probably caused by
- incorrect audio register information in the datasheet. We are
- waiting for updated information from Conexant.
+2) Some people have problems getting the i2c bus to work.
+ The symptom is that the eeprom cannot be read and the card is
+ unusable. This is probably fixed, but if you have problems
+ then post to the video4linux or ivtv-users mailinglist.
-4) VBI (raw or sliced) has not yet been implemented.
+3) VBI (raw or sliced) has not yet been implemented.
-5) MPEG indexing is not yet implemented.
+4) MPEG indexing is not yet implemented.
-6) The driver is still a bit rough around the edges, this should
+5) The driver is still a bit rough around the edges, this should
improve over time.
Firmware:
-The firmware needs to be extracted from the Windows Hauppauge HVR-1600
-driver, available here:
-
-http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
+You can obtain the firmware files here:
-Unzip, then copy the following files to the firmware directory
-and rename them as follows:
+http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
-Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
-Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
-Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
+Untar and copy the .fw files to your firmware directory.