diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-pci | 43 | ||||
| -rw-r--r-- | Documentation/dvb/README.flexcop | 205 | ||||
| -rw-r--r-- | Documentation/dvb/technisat.txt | 34 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 6 | ||||
| -rw-r--r-- | Documentation/scsi/cxgb3i.txt | 11 | ||||
| -rw-r--r-- | Documentation/x86/boot.txt | 5 |
6 files changed, 76 insertions, 228 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ceddcff4082..e638e15a889 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -1,3 +1,46 @@ +What: /sys/bus/pci/drivers/.../bind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause + the driver to attempt to bind to the device found at + this location. This is useful for overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../unbind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause the + driver to attempt to unbind from the device found at + this location. This may be useful when overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../new_id +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device ID to this file will attempt to + dynamically add a new device ID to a PCI device driver. + This may allow the driver to support more hardware than + was included in the driver's static device ID support + table at compile time. The format for the device ID is: + VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID, + Device ID, Subsystem Vendor ID, Subsystem Device ID, + Class, Class Mask, and Private Driver Data. The Vendor ID + and Device ID fields are required, the rest are optional. + Upon successfully adding an ID, the driver will probe + for the device and attempt to bind to it. For example: + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings <bhutchings@solarflare.com> diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469de7c..00000000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null @@ -1,205 +0,0 @@ -This README escorted the skystar2-driver rewriting procedure. It describes the -state of the new flexcop-driver set and some internals are written down here -too. - -This document hopefully describes things about the flexcop and its -device-offsprings. Goal was to write an easy-to-write and easy-to-read set of -drivers based on the skystar2.c and other information. - -Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been -touched and rewritten. - -History & News -============== - 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana) - - - - -General coding processing -========================= - -We should proceed as follows (as long as no one complains): - -0) Think before start writing code! - -1) rewriting the skystar2.c with the help of the flexcop register descriptions -and splitting up the files to a pci-bus-part and a flexcop-part. -The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the -device-specific part and b2c2-flexcop.ko for the common flexcop-functions. - -2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c -and other pci drivers) - -3) make some beautification (see 'Improvements when rewriting (refactoring) is -done') - -4) Testing the new driver and maybe substitute the skystar2.c with it, to reach -a wider tester audience. - -5) creating an usb-bus-part using the already written flexcop code for the pci -card. - -Idea: create a kernel-object for the flexcop and export all important -functions. This option saves kernel-memory, but maybe a lot of functions have -to be exported to kernel namespace. - - -Current situation -================= - -0) Done :) -1) Done (some minor issues left) -2) Done -3) Not ready yet, more information is necessary -4) next to be done (see the table below) -5) USB driver is working (yes, there are some minor issues) - -What seems to be ready? ------------------------ - -1) Rewriting -1a) i2c is cut off from the flexcop-pci.c and seems to work -1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c -1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c -1e) eeprom (reading MAC address) -1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) -1f) misc. register accesses for reading parameters (e.g. resetting, revision) -1g) pid/mac filter (flexcop-hw-filter.c) -1i) dvb-stuff initialization in flexcop.c (done) -1h) dma stuff (now just using the size-irq, instead of all-together, to be done) -1j) remove flexcop initialization from flexcop-pci.c completely (done) -1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') -1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from -non-static where possible, moved code to proper places) - -2) Search for errors in the leftover of flexcop-pci.c (partially done) -5a) add MAC address reading -5c) feeding of ISOC data to the software demux (format of the isochronous data -and speed optimization, no real error) (thanks to Vadim Catana) - -What to do in the near future? --------------------------------------- -(no special order here) - -5) USB driver -5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) - -Testing changes ---------------- - -O = item is working -P = item is partially working -X = item is not working -N = item does not apply here -<empty field> = item need to be examined - - | PCI | USB -item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 --------+-------+---------+---------+-------+-------+---------+---------+------- -1a) | O | | | | N | N | N | N -1b) | O | | | | | | O | -1c) | N | N | | | N | N | O | -1d) | O | O -1e) | O | O -1f) | P -1g) | O -1h) | P | -1i) | O | N -1j) | O | N -1l) | O | N -2) | O | N -5a) | N | O -5b)* | N | -5c) | N | O - -* - not done yet - -Known bugs and problems and TODO --------------------------------- - -1g/h/l) when pid filtering is enabled on the pci card - -DMA usage currently: - The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first - address and triggers an IRQ when it's full and starts writing to the second - address. When the second address is full, the IRQ is triggered again, and - the flexcop writes to first address again, and so on. - The buffersize of each address is currently 640*188 bytes. - - Problem is, when using hw-pid-filtering and doing some low-bandwidth - operation (like scanning) the buffers won't be filled enough to trigger - the IRQ. That's why: - - When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ - is triggered. Is the current write address of DMA1 different to the one - during the last IRQ, then the data is passed to the demuxer. - - There is an additional DMA-IRQ-method: packet count IRQ. This isn't - implemented correctly yet. - - The solution is to disable HW PID filtering, but I don't know how the DVB - API software demux behaves on slow systems with 45MBit/s TS. - -Solved bugs :) --------------- -1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't -working) -SOLUTION: also index 0 was affected, because net_translation is done for -these indexes by default - -5b) isochronous transfer does only work in the first attempt (for the Sky2PC -USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really -woke up again (don't know if this need fixes, see -flexcop-fe-tuner.c:flexcop_sleep) - -NEWS: when the driver is loaded and unloaded and loaded again (w/o doing -anything in the while the driver is loaded the first time), no transfers take -place anymore. - -Improvements when rewriting (refactoring) is done -================================================= - -- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control - (enable sleeping for other demods than dvb-s) -- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA) - -Debugging ---------- -- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it - with this flexcop, this is important, because i2c is now using the - flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for - that, please tell us so). - -Everything which is identical in the following table, can be put into a common -flexcop-module. - - PCI USB -------------------------------------------------------------------------------- -Different: -Register access: accessing IO memory USB control message -I2C bus: I2C bus of the FC USB control message -Data transfer: DMA isochronous transfer -EEPROM transfer: through i2c bus not clear yet - -Identical: -Streaming: accessing registers -PID Filtering: accessing registers -Sram destinations: accessing registers -Tuner/Demod: I2C bus -DVB-stuff: can be written for common use - -Acknowledgements (just for the rewriting part) -================ - -Bjarne Steinsbo thought a lot in the first place of the pci part for this code -sharing idea. - -Andreas Oberritter for providing a recent PCI initialization template -(pluto2.c). - -Boleslaw Ciesielski for pointing out a problem with firmware loader. - -Vadim Catana for correcting the USB transfer. - -comments, critics and ideas to linux-dvb@linuxtv.org. diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt index cdf6ee4b2da..3f435ffb289 100644 --- a/Documentation/dvb/technisat.txt +++ b/Documentation/dvb/technisat.txt @@ -1,5 +1,5 @@ -How to set up the Technisat devices -=================================== +How to set up the Technisat/B2C2 Flexcop devices +================================================ 1) Find out what device you have ================================ @@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)... If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: "Multimedia devices" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there. +In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only). Then please activate: 2a) Main module part: a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR +b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card +OR c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" Notice: d.) is helpful for troubleshooting 2b) Frontend module part: -1.) Revision 2.3: +1.) SkyStar DVB-S Revision 2.3: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" -2.) Revision 2.6: +2.) SkyStar DVB-S Revision 2.6: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" -3.) Revision 2.7: +3.) SkyStar DVB-S Revision 2.7: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -4.) Revision 2.8: +4.) SkyStar DVB-S Revision 2.8: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -5.) DVB-T card: +5.) AirStar DVB-T card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" -6.) DVB-C card: +6.) CableStar DVB-C card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" -7.) ATSC card 1st generation: +7.) AirStar ATSC card 1st generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" -8.) ATSC card 2nd generation: +8.) AirStar ATSC card 2nd generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners" -Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008 +9.) AirStar ATSC card 3rd generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support" + +Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 10c4b8b75c9..28de395fa09 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file icn= [HW,ISDN] Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]] - ide= [HW] (E)IDE subsystem - Format: ide=nodma or ide=doubler + ide-core.nodma= [HW] (E)IDE subsystem + Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc + .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom + .chs .ignore_cable are additional options See Documentation/ide/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt index 8141fa01978..7ac8032ee9b 100644 --- a/Documentation/scsi/cxgb3i.txt +++ b/Documentation/scsi/cxgb3i.txt @@ -4,7 +4,7 @@ Introduction ============ The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc. -series of products) supports iSCSI acceleration and iSCSI Direct Data Placement +series of products) support iSCSI acceleration and iSCSI Direct Data Placement (DDP) where the hardware handles the expensive byte touching operations, such as CRC computation and verification, and direct DMA to the final host memory destination: @@ -31,9 +31,9 @@ destination: the TCP segments onto the wire. It handles TCP retransmission if needed. - On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP + On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP segments, separating the header and data, calculating and verifying - the digests, then forwards the header to the host. The payload data, + the digests, then forwarding the header to the host. The payload data, if possible, will be directly placed into the pre-posted host DDP buffer. Otherwise, the payload data will be sent to the host too. @@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator: sure the ip address is unique in the network. 3. edit /etc/iscsi/iscsid.conf - The default setting for MaxRecvDataSegmentLength (131072) is too big, - replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no - bigger than 15360 (for example 8192): + The default setting for MaxRecvDataSegmentLength (131072) is too big; + replace with a value no bigger than 15360 (for example 8192): node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192 diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 12299697b7c..e0203662f9e 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -543,7 +543,10 @@ Protocol: 2.08+ The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. + numbers. The currently supported compression formats are gzip + (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA + (magic number 5D 00). The uncompressed payload is currently always ELF + (magic number 7F 45 4C 46). Field name: payload_length Type: read |