diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/corgi.c | 58 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi_lcd.c | 21 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/generic.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/poodle.c | 113 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/spitz.c | 4 |
5 files changed, 137 insertions, 65 deletions
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 426c2bc517e..60c8b9d8bb9 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include <asm/arch/mmc.h> #include <asm/arch/udc.h> #include <asm/arch/corgi.h> +#include <asm/arch/sharpsl.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> @@ -198,13 +199,10 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + if (( 1 << vdd) & p_d->ocr_mask) GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + else GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } } static int corgi_mci_get_ro(struct device *dev) @@ -259,6 +257,16 @@ static struct platform_device *devices[] __initdata = { static void __init corgi_init(void) { + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); @@ -285,42 +293,14 @@ static void __init fixup_corgi(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -static void __init corgi_init_irq(void) -{ - pxa_init_irq(); -} - -static struct map_desc corgi_io_desc[] __initdata = { -/* virtual physical length */ -/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */ -/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init corgi_map_io(void) -{ - pxa_map_io(); - iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; -} - #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -332,8 +312,8 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -345,8 +325,8 @@ MACHINE_START(HUSKY, "SHARP Husky") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index c5efcd04fcb..850538fadec 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/device.h> #include <linux/module.h> -#include <asm/mach-types.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> #include <asm/arch/hardware.h> @@ -468,6 +467,7 @@ void corgi_put_hsync(void) { if (get_hsync_time) symbol_put(w100fb_get_hsynclen); + get_hsync_time = NULL; } void corgi_wait_hsync(void) @@ -477,20 +477,37 @@ void corgi_wait_hsync(void) #endif #ifdef CONFIG_PXA_SHARP_Cxx00 +static struct device *spitz_pxafb_dev; + +static int is_pxafb_device(struct device * dev, void * data) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, dev); + + return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); +} + unsigned long spitz_get_hsync_len(void) { + if (!spitz_pxafb_dev) { + spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); + if (!spitz_pxafb_dev) + return 0; + } if (!get_hsync_time) get_hsync_time = symbol_get(pxafb_get_hsync_time); if (!get_hsync_time) return 0; - return pxafb_get_hsync_time(&pxafb_device.dev); + return pxafb_get_hsync_time(spitz_pxafb_dev); } void spitz_put_hsync(void) { + put_device(spitz_pxafb_dev); if (get_hsync_time) symbol_put(pxafb_get_hsync_time); + spitz_pxafb_dev = NULL; + get_hsync_time = NULL; } void spitz_wait_hsync(void) diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index a45aaa115a7..d327c127edd 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -34,6 +34,7 @@ #include <asm/arch/udc.h> #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> +#include <asm/arch/i2c.h> #include "generic.h" @@ -207,6 +208,11 @@ static struct platform_device pxafb_device = { .resource = pxafb_resources, }; +void __init set_pxa_fb_parent(struct device *parent_dev) +{ + pxafb_device.dev.parent = parent_dev; +} + static struct platform_device ffuart_device = { .name = "pxa2xx-uart", .id = 0, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 47cfb8bb831..f2563881001 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,6 +30,8 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/irq.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> #include <asm/arch/poodle.h> #include <asm/arch/pxafb.h> @@ -93,6 +95,83 @@ static struct platform_device locomo_device = { .resource = locomo_resources, }; + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ +static struct pxamci_platform_data poodle_mci_platform_data; + +static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT); + + poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void poodle_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) + GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR); + else + GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR); +} + +static void poodle_mci_exit(struct device *dev, void *data) +{ + free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data poodle_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = poodle_mci_init, + .setpower = poodle_mci_setpower, + .exit = poodle_mci_exit, +}; + + +/* + * USB Device Controller + */ +static void poodle_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + } +} + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + /* no connect GPIO; poodle can't tell connection status */ + .udc_command = poodle_udc_command, +}; + + /* PXAFB device */ static struct pxafb_mach_info poodle_fb_info __initdata = { .pixclock = 144700, @@ -126,6 +205,15 @@ static void __init poodle_init(void) { int ret = 0; + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00008000; + PGSR1 = 0x003F0202; + PGSR2 = 0x0001C000; + PCFR |= PCFR_OPDE; + /* cpu initialize */ /* Pgsr Register */ PGSR0 = 0x0146dd80; @@ -155,6 +243,9 @@ static void __init poodle_init(void) GPSR2 = 0x00000000; set_pxa_fb_info(&poodle_fb_info); + pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT); + pxa_set_udc_info(&udc_info); + pxa_set_mci_info(&poodle_mci_platform_data); scoop_num = 1; scoop_devs = &poodle_pcmcia_scoop[0]; @@ -171,32 +262,12 @@ static void __init fixup_poodle(struct machine_desc *desc, sharpsl_save_param(); } -static struct map_desc poodle_io_desc[] __initdata = { - /* virtual physical length */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init poodle_map_io(void) -{ - pxa_map_io(); - iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; - PCFR |= PCFR_OPDE; -} - MACHINE_START(POODLE, "SHARP Poodle") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, - .map_io = poodle_map_io, + .map_io = pxa_map_io, .init_irq = pxa_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 568afe3d6e1..d0ab428c2d7 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -36,7 +36,6 @@ #include <asm/arch/irq.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> -#include <asm/arch/ohci.h> #include <asm/arch/pxafb.h> #include <asm/arch/akita.h> #include <asm/arch/spitz.h> @@ -304,7 +303,6 @@ static struct platform_device *devices[] __initdata = { &spitzkbd_device, &spitzts_device, &spitzbl_device, - &spitzbattery_device, }; static void __init common_init(void) @@ -328,7 +326,7 @@ static void __init common_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_mci_info(&spitz_mci_platform_data); - pxafb_device.dev.parent = &spitzssp_device.dev; + set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); } |