aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410/clock.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410/clock.c')
-rw-r--r--arch/arm/mach-s3c2410/clock.c565
1 files changed, 196 insertions, 369 deletions
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e13fb677889..5b4831c4c1d 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -1,15 +1,9 @@
/* linux/arch/arm/mach-s3c2410/clock.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- ** Copyright (C) 2004 ARM Limited.
- ** Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,418 +26,251 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include "clock.h"
-#include "cpu.h"
-
-/* clock information */
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
{
- return 0;
-}
-
-/* Clock API calls */
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p;
- struct clk *clk = ERR_PTR(-ENOENT);
- int idno;
+ clkcon = __raw_readl(S3C2410_CLKCON);
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
+ if (enable)
+ clkcon |= clocks;
else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, list) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
- /* check for the case where a device was supplied, but the
- * clock that was being searched for is not device specific */
-
- if (IS_ERR(clk)) {
- list_for_each_entry(p, &clocks, list) {
- if (p->id == -1 && strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- }
+ clkcon &= ~clocks;
- mutex_unlock(&clocks_mutex);
- return clk;
-}
+ /* ensure none of the special function bits set */
+ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
+ __raw_writel(clkcon, S3C2410_CLKCON);
-int clk_enable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return -EINVAL;
-
- clk_enable(clk->parent);
-
- mutex_lock(&clocks_mutex);
-
- if ((clk->usage++) == 0)
- (clk->enable)(clk, 1);
-
- mutex_unlock(&clocks_mutex);
return 0;
}
-void clk_disable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return;
-
- mutex_lock(&clocks_mutex);
-
- if ((--clk->usage) == 0)
- (clk->enable)(clk, 0);
-
- mutex_unlock(&clocks_mutex);
- clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (IS_ERR(clk))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
-
- if (clk->parent != NULL)
- return clk_get_rate(clk->parent);
-
- return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
-
- return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = (clk->set_rate)(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
{
- return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = 0;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
-
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
-
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
- .name = "xtal",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_mpll = {
- .name = "mpll",
- .id = -1,
-};
-
-struct clk clk_upll = {
- .name = "upll",
- .id = -1,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_f = {
- .name = "fclk",
- .id = -1,
- .rate = 0,
- .parent = &clk_mpll,
- .ctrlbit = 0,
-};
-
-struct clk clk_h = {
- .name = "hclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_p = {
- .name = "pclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_usb_bus = {
- .name = "usb-bus",
- .id = -1,
- .rate = 0,
- .parent = &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long orig = clkslow;
if (enable)
- dclkcon |= clk->ctrlbit;
+ clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
else
- dclkcon &= ~clk->ctrlbit;
+ clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ __raw_writel(clkslow, S3C2410_CLKSLOW);
- return 0;
-}
+ /* if we started the UPLL, then allow to settle */
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long dclkcon;
- unsigned int uclk;
-
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
- }
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+ udelay(200);
return 0;
}
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
-
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_xtal)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_dclk0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_NAND,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SPI,
}
-
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
};
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+static struct clk init_clocks[] = {
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = 0,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ }, {
+ .name = "usb-bus-gadget",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ },
};
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
- .name = "uclk",
- .id = -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
- clk->owner = THIS_MODULE;
-
- if (clk->enable == NULL)
- clk->enable = clk_null_enable;
-
- /* add to the list of available clocks */
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->list, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-/* initalise all the clocks */
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
-int __init s3c24xx_setup_clocks(unsigned long xtal,
- unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
+int __init s3c2410_baseclk_add(void)
{
- printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ struct clk *clkp;
+ struct clk *xtal;
+ int ret;
+ int ptr;
- /* initialise the main system clocks */
+ clk_upll.enable = s3c2410_upll_enable;
- clk_xtal.rate = xtal;
- clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+ if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+ printk(KERN_ERR "failed to register usb bus clock\n");
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
+ /* register clocks from clock array */
- /* assume uart clocks are correctly setup */
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ /* ensure that we note the clock state */
- /* register our clocks */
+ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
- if (s3c24xx_register_clock(&clk_xtal) < 0)
- printk(KERN_ERR "failed to register master xtal\n");
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
- if (s3c24xx_register_clock(&clk_mpll) < 0)
- printk(KERN_ERR "failed to register mpll clock\n");
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsytems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
+
+ /* install (and disable) the clocks we do not need immediately */
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
- if (s3c24xx_register_clock(&clk_upll) < 0)
- printk(KERN_ERR "failed to register upll clock\n");
+ s3c2410_clkcon_enable(clkp, 0);
+ }
- if (s3c24xx_register_clock(&clk_f) < 0)
- printk(KERN_ERR "failed to register cpu fclk\n");
+ /* show the clock-slow value */
- if (s3c24xx_register_clock(&clk_h) < 0)
- printk(KERN_ERR "failed to register cpu hclk\n");
+ xtal = clk_get(NULL, "xtal");
- if (s3c24xx_register_clock(&clk_p) < 0)
- printk(KERN_ERR "failed to register cpu pclk\n");
+ printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+ print_mhz(clk_get_rate(xtal) /
+ ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+ (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+ (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+ (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
return 0;
}