aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/alchemy/pb1000/board_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy/pb1000/board_setup.c')
-rw-r--r--arch/mips/alchemy/pb1000/board_setup.c165
1 files changed, 165 insertions, 0 deletions
diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c
new file mode 100644
index 00000000000..25df167a95b
--- /dev/null
+++ b/arch/mips/alchemy/pb1000/board_setup.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1000.h>
+
+void board_reset(void)
+{
+}
+
+void __init board_setup(void)
+{
+ u32 pin_func, static_cfg0;
+ u32 sys_freqctrl, sys_clksrc;
+ u32 prid = read_c0_prid();
+
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
+ au_writel(8, SYS_AUXPLL);
+ au_writel(0, SYS_PINSTATERD);
+ udelay(100);
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* Zero and disable FREQ2 */
+ sys_freqctrl = au_readl(SYS_FREQCTRL0);
+ sys_freqctrl &= ~0xFFF00000;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+ /* Zero and disable USBH/USBD clocks */
+ sys_clksrc = au_readl(SYS_CLKSRC);
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
+ au_writel(sys_clksrc, SYS_CLKSRC);
+
+ sys_freqctrl = au_readl(SYS_FREQCTRL0);
+ sys_freqctrl &= ~0xFFF00000;
+
+ sys_clksrc = au_readl(SYS_CLKSRC);
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
+
+ switch (prid & 0x000000FF) {
+ case 0x00: /* DA */
+ case 0x01: /* HA */
+ case 0x02: /* HB */
+ /* CPU core freq to 48 MHz to slow it way down... */
+ au_writel(4, SYS_CPUPLL);
+
+ /*
+ * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+ * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+ */
+ sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+ /* CPU core freq to 384 MHz */
+ au_writel(0x20, SYS_CPUPLL);
+
+ printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
+ break;
+
+ default: /* HC and newer */
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ break;
+ }
+
+ /*
+ * Route 48 MHz FREQ2 into USB Host and/or Device
+ */
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
+ au_writel(sys_clksrc, SYS_CLKSRC);
+
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
+
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
+
+ au_writel(pin_func, SYS_PINFUNC);
+ au_writel(0x2800, SYS_TRIOUTCLR);
+ au_writel(0x0030, SYS_OUTPUTCLR);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+ /* Make GPIO 15 an input (for interrupt line) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+ /* We don't need I2S, so make it available for GPIO[31:29] */
+ pin_func |= SYS_PF_I2S;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0x8000, SYS_TRIOUTCLR);
+
+ static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
+ au_writel(static_cfg0, MEM_STCFG0);
+
+ /* configure RCE2* for LCD */
+ au_writel(0x00000004, MEM_STCFG2);
+
+ /* MEM_STTIME2 */
+ au_writel(0x09000000, MEM_STTIME2);
+
+ /* Set 32-bit base address decoding for RCE2* */
+ au_writel(0x10003ff0, MEM_STADDR2);
+
+ /*
+ * PCI CPLD setup
+ * Expand CE0 to cover PCI
+ */
+ au_writel(0x11803e40, MEM_STADDR1);
+
+ /* Burst visibility on */
+ au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
+
+ au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
+ au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
+
+ /* Setup the static bus controller */
+ au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
+ au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+ /*
+ * Enable Au1000 BCLK switching - note: sed1356 must not use
+ * its BCLK (Au1000 LCLK) for any timings
+ */
+ switch (prid & 0x000000FF) {
+ case 0x00: /* DA */
+ case 0x01: /* HA */
+ case 0x02: /* HB */
+ break;
+ default: /* HC and newer */
+ /*
+ * Enable sys bus clock divider when IDLE state or no bus
+ * activity.
+ */
+ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
+ break;
+ }
+}