aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx/mpc85xx_ads.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/85xx/mpc85xx_ads.c')
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c244
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
new file mode 100644
index 00000000000..b7821dbae00
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -0,0 +1,244 @@
+/*
+ * MPC85xx setup and early boot code plus other random bits.
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/prom.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include "mpc85xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ *
+ * Note: Likely, this table and the following function should be
+ * obtained and derived from the OF Device Tree.
+ */
+static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
+ MPC85XX_INTERNAL_IRQ_SENSES,
+ 0x0, /* External 0: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
+#else
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * This is little evil, but works around the fact
+ * that revA boards have IDSEL starting at 18
+ * and others boards (older) start at 12
+ *
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
+ };
+
+ const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+#endif /* CONFIG_PCI */
+
+
+void __init mpc85xx_ads_pic_init(void)
+{
+ struct mpic *mpic1;
+ phys_addr_t OpenPIC_PAddr;
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+
+ mpic1 = mpic_alloc(OpenPIC_PAddr,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
+ mpc85xx_ads_openpic_initsenses,
+ sizeof(mpc85xx_ads_openpic_initsenses),
+ " OpenPIC ");
+ BUG_ON(mpic1 == NULL);
+ mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
+ mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
+ mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
+ mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
+ mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
+ mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
+ mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
+ mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
+
+ /* dummy mappings to get to 48 */
+ mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
+ mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
+ mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
+ mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
+
+ /* External ints */
+ mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
+ mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
+ mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
+ mpic_init(mpic1);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc85xx_ads_setup_arch(void)
+{
+ struct device_node *cpu;
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != 0) {
+ unsigned int *fp;
+
+ fp = (int *)get_property(cpu, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(cpu);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = mpc85xx_map_irq;
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: mpc85xx\n");
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+void __init platform_init(void)
+{
+ ppc_md.setup_arch = mpc85xx_ads_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
+
+ ppc_md.init_IRQ = mpc85xx_ads_pic_init;
+ ppc_md.get_irq = mpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = NULL;
+ ppc_md.halt = NULL;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = generic_calibrate_decr;
+
+ ppc_md.progress = udbg_progress;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_ads platform_init(): exit", 0);
+}