aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/eeh.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh.c')
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c96
1 files changed, 73 insertions, 23 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 32eaddfa547..84bc8f7e17e 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -449,7 +449,11 @@ EXPORT_SYMBOL(eeh_check_failure);
/* ------------------------------------------------------------- */
/* The code below deals with error recovery */
-/** Return negative value if a permanent error, else return
+/**
+ * eeh_slot_availability - returns error status of slot
+ * @pdn pci device node
+ *
+ * Return negative value if a permanent error, else return
* a number of milliseconds to wait until the PCI slot is
* ready to be used.
*/
@@ -474,11 +478,42 @@ eeh_slot_availability(struct pci_dn *pdn)
printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n",
rc, rets[0], rets[1], rets[2]);
- return -1;
+ return -2;
+}
+
+/**
+ * rtas_pci_enable - enable MMIO or DMA transfers for this slot
+ * @pdn pci device node
+ */
+
+int
+rtas_pci_enable(struct pci_dn *pdn, int function)
+{
+ int config_addr;
+ int rc;
+
+ /* Use PE configuration address, if present */
+ config_addr = pdn->eeh_config_addr;
+ if (pdn->eeh_pe_config_addr)
+ config_addr = pdn->eeh_pe_config_addr;
+
+ rc = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
+ config_addr,
+ BUID_HI(pdn->phb->buid),
+ BUID_LO(pdn->phb->buid),
+ function);
+
+ if (rc)
+ printk(KERN_WARNING "EEH: Cannot enable function %d, err=%d dn=%s\n",
+ function, rc, pdn->node->full_name);
+
+ return rc;
}
-/** rtas_pci_slot_reset raises/lowers the pci #RST line
- * state: 1/0 to raise/lower the #RST
+/**
+ * rtas_pci_slot_reset - raises/lowers the pci #RST line
+ * @pdn pci device node
+ * @state: 1/0 to raise/lower the #RST
*
* Clear the EEH-frozen condition on a slot. This routine
* asserts the PCI #RST line if the 'state' argument is '1',
@@ -511,24 +546,21 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid),
state);
- if (rc) {
- printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n",
+ if (rc)
+ printk (KERN_WARNING "EEH: Unable to reset the failed slot,"
+ " (%d) #RST=%d dn=%s\n",
rc, state, pdn->node->full_name);
- return;
- }
}
-/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
- * dn -- device node to be reset.
+/**
+ * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
+ * @pdn: pci device node to be reset.
*
* Return 0 if success, else a non-zero value.
*/
-int
-rtas_set_slot_reset(struct pci_dn *pdn)
+static void __rtas_set_slot_reset(struct pci_dn *pdn)
{
- int i, rc;
-
rtas_pci_slot_reset (pdn, 1);
/* The PCI bus requires that the reset be held high for at least
@@ -549,17 +581,33 @@ rtas_set_slot_reset(struct pci_dn *pdn)
* up traffic. */
#define PCI_BUS_SETTLE_TIME_MSEC 1800
msleep (PCI_BUS_SETTLE_TIME_MSEC);
+}
+
+int rtas_set_slot_reset(struct pci_dn *pdn)
+{
+ int i, rc;
+
+ __rtas_set_slot_reset(pdn);
/* Now double check with the firmware to make sure the device is
* ready to be used; if not, wait for recovery. */
for (i=0; i<10; i++) {
rc = eeh_slot_availability (pdn);
- if (rc < 0)
- printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n", rc, pdn->node->full_name);
if (rc == 0)
return 0;
- if (rc < 0)
+
+ if (rc == -2) {
+ printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n",
+ i, pdn->node->full_name);
+ __rtas_set_slot_reset(pdn);
+ continue;
+ }
+
+ if (rc < 0) {
+ printk (KERN_ERR "EEH: unrecoverable slot failure %s\n",
+ pdn->node->full_name);
return -1;
+ }
msleep (rc+100);
}
@@ -582,6 +630,8 @@ rtas_set_slot_reset(struct pci_dn *pdn)
/**
* __restore_bars - Restore the Base Address Registers
+ * @pdn: pci device node
+ *
* Loads the PCI configuration space base address registers,
* the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node.
@@ -691,11 +741,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
{
struct eeh_early_enable_info *info = data;
int ret;
- char *status = get_property(dn, "status", NULL);
- u32 *class_code = (u32 *)get_property(dn, "class-code", NULL);
- u32 *vendor_id = (u32 *)get_property(dn, "vendor-id", NULL);
- u32 *device_id = (u32 *)get_property(dn, "device-id", NULL);
- u32 *regs;
+ const char *status = get_property(dn, "status", NULL);
+ const u32 *class_code = get_property(dn, "class-code", NULL);
+ const u32 *vendor_id = get_property(dn, "vendor-id", NULL);
+ const u32 *device_id = get_property(dn, "device-id", NULL);
+ const u32 *regs;
int enable;
struct pci_dn *pdn = PCI_DN(dn);
@@ -737,7 +787,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
/* Ok... see if this device supports EEH. Some do, some don't,
* and the only way to find out is to check each and every one. */
- regs = (u32 *)get_property(dn, "reg", NULL);
+ regs = get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
/* Try to enable eeh */