aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/smp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/smp.c')
-rw-r--r--arch/powerpc/platforms/pseries/smp.c200
1 files changed, 0 insertions, 200 deletions
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index c6624b8a0e7..4408518eaeb 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -64,197 +64,6 @@ static cpumask_t of_spin_map;
extern void generic_secondary_smp_init(unsigned long);
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Get state of physical CPU.
- * Return codes:
- * 0 - The processor is in the RTAS stopped state
- * 1 - stop-self is in progress
- * 2 - The processor is not in the RTAS stopped state
- * -1 - Hardware Error
- * -2 - Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
- int cpu_status;
- int status, qcss_tok;
-
- qcss_tok = rtas_token("query-cpu-stopped-state");
- if (qcss_tok == RTAS_UNKNOWN_SERVICE)
- return -1;
- status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
- if (status != 0) {
- printk(KERN_ERR
- "RTAS query-cpu-stopped-state failed: %i\n", status);
- return status;
- }
-
- return cpu_status;
-}
-
-static int pSeries_cpu_disable(void)
-{
- int cpu = smp_processor_id();
-
- cpu_clear(cpu, cpu_online_map);
- vdso_data->processorCount--;
-
- /*fix boot_cpuid here*/
- if (cpu == boot_cpuid)
- boot_cpuid = any_online_cpu(cpu_online_map);
-
- /* FIXME: abstract this to not be platform specific later on */
- xics_migrate_irqs_away();
- return 0;
-}
-
-static void pSeries_cpu_die(unsigned int cpu)
-{
- int tries;
- int cpu_status;
- unsigned int pcpu = get_hard_smp_processor_id(cpu);
-
- for (tries = 0; tries < 25; tries++) {
- cpu_status = query_cpu_stopped(pcpu);
- if (cpu_status == 0 || cpu_status == -1)
- break;
- msleep(200);
- }
- if (cpu_status != 0) {
- printk("Querying DEAD? cpu %i (%i) shows %i\n",
- cpu, pcpu, cpu_status);
- }
-
- /* Isolation and deallocation are definatly done by
- * drslot_chrp_cpu. If they were not they would be
- * done here. Change isolate state to Isolate and
- * change allocation-state to Unusable.
- */
- paca[cpu].cpu_start = 0;
-}
-
-/*
- * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
- * here is that a cpu device node may represent up to two logical cpus
- * in the SMT case. We must honor the assumption in other code that
- * the logical ids for sibling SMT threads x and y are adjacent, such
- * that x^1 == y and y^1 == x.
- */
-static int pSeries_add_processor(struct device_node *np)
-{
- unsigned int cpu;
- cpumask_t candidate_map, tmp = CPU_MASK_NONE;
- int err = -ENOSPC, len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return 0;
-
- nthreads = len / sizeof(u32);
- for (i = 0; i < nthreads; i++)
- cpu_set(i, tmp);
-
- lock_cpu_hotplug();
-
- BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
-
- /* Get a bitmap of unoccupied slots. */
- cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
- if (cpus_empty(candidate_map)) {
- /* If we get here, it most likely means that NR_CPUS is
- * less than the partition's max processors setting.
- */
- printk(KERN_ERR "Cannot add cpu %s; this system configuration"
- " supports %d logical cpus.\n", np->full_name,
- cpus_weight(cpu_possible_map));
- goto out_unlock;
- }
-
- while (!cpus_empty(tmp))
- if (cpus_subset(tmp, candidate_map))
- /* Found a range where we can insert the new cpu(s) */
- break;
- else
- cpus_shift_left(tmp, tmp, nthreads);
-
- if (cpus_empty(tmp)) {
- printk(KERN_ERR "Unable to find space in cpu_present_map for"
- " processor %s with %d thread(s)\n", np->name,
- nthreads);
- goto out_unlock;
- }
-
- for_each_cpu_mask(cpu, tmp) {
- BUG_ON(cpu_isset(cpu, cpu_present_map));
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, *intserv++);
- }
- err = 0;
-out_unlock:
- unlock_cpu_hotplug();
- return err;
-}
-
-/*
- * Update the present map for a cpu node which is going away, and set
- * the hard id in the paca(s) to -1 to be consistent with boot time
- * convention for non-present cpus.
- */
-static void pSeries_remove_processor(struct device_node *np)
-{
- unsigned int cpu;
- int len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return;
-
- nthreads = len / sizeof(u32);
-
- lock_cpu_hotplug();
- for (i = 0; i < nthreads; i++) {
- for_each_present_cpu(cpu) {
- if (get_hard_smp_processor_id(cpu) != intserv[i])
- continue;
- BUG_ON(cpu_online(cpu));
- cpu_clear(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, -1);
- break;
- }
- if (cpu == NR_CPUS)
- printk(KERN_WARNING "Could not find cpu to remove "
- "with physical id 0x%x\n", intserv[i]);
- }
- unlock_cpu_hotplug();
-}
-
-static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
- int err = NOTIFY_OK;
-
- switch (action) {
- case PSERIES_RECONFIG_ADD:
- if (pSeries_add_processor(node))
- err = NOTIFY_BAD;
- break;
- case PSERIES_RECONFIG_REMOVE:
- pSeries_remove_processor(node);
- break;
- default:
- err = NOTIFY_DONE;
- break;
- }
- return err;
-}
-
-static struct notifier_block pSeries_smp_nb = {
- .notifier_call = pSeries_smp_notifier,
-};
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
/**
* smp_startup_cpu() - start the given cpu
*
@@ -422,15 +231,6 @@ static void __init smp_init_pseries(void)
DBG(" -> smp_init_pSeries()\n");
-#ifdef CONFIG_HOTPLUG_CPU
- smp_ops->cpu_disable = pSeries_cpu_disable;
- smp_ops->cpu_die = pSeries_cpu_die;
-
- /* Processors can be added/removed only on LPAR */
- if (firmware_has_feature(FW_FEATURE_LPAR))
- pSeries_reconfig_notifier_register(&pSeries_smp_nb);
-#endif
-
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {