aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/8260_io/fcc_enet.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/8260_io/fcc_enet.c')
-rw-r--r--arch/ppc/8260_io/fcc_enet.c2379
1 files changed, 0 insertions, 2379 deletions
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
deleted file mode 100644
index d38b57e24ce..00000000000
--- a/arch/ppc/8260_io/fcc_enet.c
+++ /dev/null
@@ -1,2379 +0,0 @@
-/*
- * Fast Ethernet Controller (FCC) driver for Motorola MPC8260.
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is a combination of the 8xx fec and
- * 8260 SCC Ethernet drivers. This version has some additional
- * configuration options, which should probably be moved out of
- * here. This driver currently works for the EST SBC8260,
- * SBS Diablo/BCM, Embedded Planet RPX6, TQM8260, and others.
- *
- * Right now, I am very watseful with the buffers. I allocate memory
- * pages and then divide them into 2K frame buffers. This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets. Since this is a cache coherent processor and CPM,
- * I could also preallocate SKB's and use them directly on the interface.
- *
- * 2004-12 Leo Li (leoli@freescale.com)
- * - Rework the FCC clock configuration part, make it easier to configure.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/signal.h>
-
-/* We can't use the PHY interrupt if we aren't using MDIO. */
-#if !defined(CONFIG_USE_MDIO)
-#undef PHY_INTERRUPT
-#endif
-
-/* If we have a PHY interrupt, we will advertise both full-duplex and half-
- * duplex capabilities. If we don't have a PHY interrupt, then we will only
- * advertise half-duplex capabilities.
- */
-#define MII_ADVERTISE_HALF (ADVERTISE_100HALF | ADVERTISE_10HALF | \
- ADVERTISE_CSMA)
-#define MII_ADVERTISE_ALL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- MII_ADVERTISE_HALF)
-#ifdef PHY_INTERRUPT
-#define MII_ADVERTISE_DEFAULT MII_ADVERTISE_ALL
-#else
-#define MII_ADVERTISE_DEFAULT MII_ADVERTISE_HALF
-#endif
-#include <asm/cpm2.h>
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT (2*HZ)
-
-#ifdef CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs */
-
-typedef struct {
- uint mii_data;
- void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
- uint id;
- char *name;
-
- const phy_cmd_t *config;
- const phy_cmd_t *startup;
- const phy_cmd_t *ack_int;
- const phy_cmd_t *shutdown;
-} phy_info_t;
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
-#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
-#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
-#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
-#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
-#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
-#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
-#endif /* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers. These are allocated from the page
- * pool. The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter. We just use
- * the skbuffer directly.
- */
-#define FCC_ENET_RX_PAGES 16
-#define FCC_ENET_RX_FRSIZE 2048
-#define FCC_ENET_RX_FRPPG (PAGE_SIZE / FCC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE (FCC_ENET_RX_FRPPG * FCC_ENET_RX_PAGES)
-#define TX_RING_SIZE 16 /* Must be power of two */
-#define TX_RING_MOD_MASK 15 /* for this to work */
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets.
- * size includes support for VLAN
- */
-#define PKT_MAXBUF_SIZE 1522
-#define PKT_MINBUF_SIZE 64
-
-/* Maximum input DMA size. Must be a should(?) be a multiple of 4.
- * size includes support for VLAN
- */
-#define PKT_MAXDMA_SIZE 1524
-
-/* Maximum input buffer size. Must be a multiple of 32.
-*/
-#define PKT_MAXBLR_SIZE 1536
-
-static int fcc_enet_open(struct net_device *dev);
-static int fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int fcc_enet_rx(struct net_device *dev);
-static irqreturn_t fcc_enet_interrupt(int irq, void *dev_id);
-static int fcc_enet_close(struct net_device *dev);
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev);
-/* static void set_multicast_list(struct net_device *dev); */
-static void fcc_restart(struct net_device *dev, int duplex);
-static void fcc_stop(struct net_device *dev);
-static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
-
-/* These will be configurable for the FCC choice.
- * Multiple ports can be configured. There is little choice among the
- * I/O pins to the PHY, except the clocks. We will need some board
- * dependent clock selection.
- * Why in the hell did I put these inside #ifdef's? I dunno, maybe to
- * help show what pins are used for each device.
- */
-
-/* Since the CLK setting changes greatly from board to board, I changed
- * it to a easy way. You just need to specify which CLK number to use.
- * Note that only limited choices can be make on each port.
- */
-
-/* FCC1 Clock Source Configuration. There are board specific.
- Can only choose from CLK9-12 */
-#ifdef CONFIG_SBC82xx
-#define F1_RXCLK 9
-#define F1_TXCLK 10
-#else
-#define F1_RXCLK 12
-#define F1_TXCLK 11
-#endif
-
-/* FCC2 Clock Source Configuration. There are board specific.
- Can only choose from CLK13-16 */
-#define F2_RXCLK 13
-#define F2_TXCLK 14
-
-/* FCC3 Clock Source Configuration. There are board specific.
- Can only choose from CLK13-16 */
-#define F3_RXCLK 15
-#define F3_TXCLK 16
-
-/* Automatically generates register configurations */
-#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK ((uint)0xff000000)
-
-#define PC_F2RXCLK PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK ((uint)0x00ff0000)
-
-#define PC_F3RXCLK PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK ((uint)0x0000ff00)
-
-
-/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL ((uint)0x00000001)
-#define PA1_CRS ((uint)0x00000002)
-#define PA1_TXER ((uint)0x00000004)
-#define PA1_TXEN ((uint)0x00000008)
-#define PA1_RXDV ((uint)0x00000010)
-#define PA1_RXER ((uint)0x00000020)
-#define PA1_TXDAT ((uint)0x00003c00)
-#define PA1_RXDAT ((uint)0x0003c000)
-#define PA1_PSORA_BOUT (PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA_BIN (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
- PA1_RXDV | PA1_RXER)
-#define PA1_DIRA_BOUT (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA_BIN (PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER ((uint)0x00000001)
-#define PB2_RXDV ((uint)0x00000002)
-#define PB2_TXEN ((uint)0x00000004)
-#define PB2_RXER ((uint)0x00000008)
-#define PB2_COL ((uint)0x00000010)
-#define PB2_CRS ((uint)0x00000020)
-#define PB2_TXDAT ((uint)0x000003c0)
-#define PB2_RXDAT ((uint)0x00003c00)
-#define PB2_PSORB_BOUT (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
- PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB_BIN (PB2_TXEN)
-#define PB2_DIRB_BOUT (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB_BIN (PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV ((uint)0x00004000)
-#define PB3_RXER ((uint)0x00008000)
-#define PB3_TXER ((uint)0x00010000)
-#define PB3_TXEN ((uint)0x00020000)
-#define PB3_COL ((uint)0x00040000)
-#define PB3_CRS ((uint)0x00080000)
-#ifndef CONFIG_RPX8260
-#define PB3_TXDAT ((uint)0x0f000000)
-#define PC3_TXDAT ((uint)0x00000000)
-#else
-#define PB3_TXDAT ((uint)0x0f000000)
-#define PC3_TXDAT 0
-#endif
-#define PB3_RXDAT ((uint)0x00f00000)
-#define PB3_PSORB_BOUT (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
- PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB_BIN (0)
-#define PB3_DIRB_BOUT (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB_BIN (PB3_TXDAT | PB3_TXEN | PB3_TXER)
-
-#define PC3_PSORC_BOUT (PC3_TXDAT)
-#define PC3_PSORC_BIN (0)
-#define PC3_DIRC_BOUT (0)
-#define PC3_DIRC_BIN (PC3_TXDAT)
-
-
-/* MII status/control serial interface.
-*/
-#if defined(CONFIG_RPX8260)
-/* The EP8260 doesn't use Port C for MDIO */
-#define PC_MDIO ((uint)0x00000000)
-#define PC_MDCK ((uint)0x00000000)
-#elif defined(CONFIG_TQM8260)
-/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
-#define PC_MDIO ((uint)0x00000002)
-#define PC_MDCK ((uint)0x00000001)
-#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
-#define PC_MDIO ((uint)0x00400000)
-#define PC_MDCK ((uint)0x00200000)
-#else
-#define PC_MDIO ((uint)0x00000004)
-#define PC_MDCK ((uint)0x00000020)
-#endif
-
-#if defined(CONFIG_USE_MDIO) && (!defined(PC_MDIO) || !defined(PC_MDCK))
-#error "Must define PC_MDIO and PC_MDCK if using MDIO"
-#endif
-
-/* PHY addresses */
-/* default to dynamic config of phy addresses */
-#define FCC1_PHY_ADDR 0
-#ifdef CONFIG_PQ2FADS
-#define FCC2_PHY_ADDR 0
-#else
-#define FCC2_PHY_ADDR 2
-#endif
-#define FCC3_PHY_ADDR 3
-
-/* A table of information for supporting FCCs. This does two things.
- * First, we know how many FCCs we have and they are always externally
- * numbered from zero. Second, it holds control register and I/O
- * information that could be different among board designs.
- */
-typedef struct fcc_info {
- uint fc_fccnum;
- uint fc_phyaddr;
- uint fc_cpmblock;
- uint fc_cpmpage;
- uint fc_proff;
- uint fc_interrupt;
- uint fc_trxclocks;
- uint fc_clockroute;
- uint fc_clockmask;
- uint fc_mdio;
- uint fc_mdck;
-} fcc_info_t;
-
-static fcc_info_t fcc_ports[] = {
-#ifdef CONFIG_FCC1_ENET
- { 0, FCC1_PHY_ADDR, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, PROFF_FCC1, SIU_INT_FCC1,
- (PC_F1RXCLK | PC_F1TXCLK), CMX1_CLK_ROUTE, CMX1_CLK_MASK,
- PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC2_ENET
- { 1, FCC2_PHY_ADDR, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, PROFF_FCC2, SIU_INT_FCC2,
- (PC_F2RXCLK | PC_F2TXCLK), CMX2_CLK_ROUTE, CMX2_CLK_MASK,
- PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC3_ENET
- { 2, FCC3_PHY_ADDR, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, PROFF_FCC3, SIU_INT_FCC3,
- (PC_F3RXCLK | PC_F3TXCLK), CMX3_CLK_ROUTE, CMX3_CLK_MASK,
- PC_MDIO, PC_MDCK },
-#endif
-};
-
-/* The FCC buffer descriptors track the ring buffers. The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors. The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller. The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions. The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fcc_enet_private {
- /* The saved address of a sent-in-place packet/buffer, for skfree(). */
- struct sk_buff* tx_skbuff[TX_RING_SIZE];
- ushort skb_cur;
- ushort skb_dirty;
-
- /* CPM dual port RAM relative addresses.
- */
- cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
- cbd_t *tx_bd_base;
- cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
- cbd_t *dirty_tx; /* The ring entries to be free()ed. */
- volatile fcc_t *fccp;
- volatile fcc_enet_t *ep;
- struct net_device_stats stats;
- uint tx_free;
- spinlock_t lock;
-
-#ifdef CONFIG_USE_MDIO
- uint phy_id;
- uint phy_id_done;
- uint phy_status;
- phy_info_t *phy;
- struct work_struct phy_relink;
- struct work_struct phy_display_config;
- struct net_device *dev;
-
- uint sequence_done;
-
- uint phy_addr;
-#endif /* CONFIG_USE_MDIO */
-
- int link;
- int old_link;
- int full_duplex;
-
- fcc_info_t *fip;
-};
-
-static void init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
- volatile cpm2_map_t *immap);
-static void init_fcc_startup(fcc_info_t *fip, struct net_device *dev);
-static void init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
- volatile cpm2_map_t *immap);
-static void init_fcc_param(fcc_info_t *fip, struct net_device *dev,
- volatile cpm2_map_t *immap);
-
-#ifdef CONFIG_USE_MDIO
-static int mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *));
-static uint mii_send_receive(fcc_info_t *fip, uint cmd);
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c);
-
-/* Make MII read/write commands for the FCC.
-*/
-#define mk_mii_read(REG) (0x60020000 | (((REG) & 0x1f) << 18))
-#define mk_mii_write(REG, VAL) (0x50020000 | (((REG) & 0x1f) << 18) | \
- ((VAL) & 0xffff))
-#define mk_mii_end 0
-#endif /* CONFIG_USE_MDIO */
-
-
-static int
-fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
- volatile cbd_t *bdp;
-
- /* Fill in a Tx ring entry */
- bdp = cep->cur_tx;
-
-#ifndef final_version
- if (!cep->tx_free || (bdp->cbd_sc & BD_ENET_TX_READY)) {
- /* Ooops. All transmit buffers are full. Bail out.
- * This should not happen, since the tx queue should be stopped.
- */
- printk("%s: tx queue full!.\n", dev->name);
- return 1;
- }
-#endif
-
- /* Clear all of the status flags. */
- bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
- /* If the frame is short, tell CPM to pad it. */
- if (skb->len <= ETH_ZLEN)
- bdp->cbd_sc |= BD_ENET_TX_PAD;
- else
- bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
- /* Set buffer length and buffer pointer. */
- bdp->cbd_datlen = skb->len;
- bdp->cbd_bufaddr = __pa(skb->data);
-
- spin_lock_irq(&cep->lock);
-
- /* Save skb pointer. */
- cep->tx_skbuff[cep->skb_cur] = skb;
-
- cep->stats.tx_bytes += skb->len;
- cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
- /* Send it on its way. Tell CPM its ready, interrupt when done,
- * its the last BD of the frame, and to put the CRC on the end.
- */
- bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-#if 0
- /* Errata says don't do this. */
- cep->fccp->fcc_ftodr = 0x8000;
-#endif
- dev->trans_start = jiffies;
-
- /* If this was the last BD in the ring, start at the beginning again. */
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
- bdp = cep->tx_bd_base;
- else
- bdp++;
-
- if (!--cep->tx_free)
- netif_stop_queue(dev);
-
- cep->cur_tx = (cbd_t *)bdp;
-
- spin_unlock_irq(&cep->lock);
-
- return 0;
-}
-
-
-static void
-fcc_enet_timeout(struct net_device *dev)
-{
- struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
- printk("%s: transmit timed out.\n", dev->name);
- cep->stats.tx_errors++;
-#ifndef final_version
- {
- int i;
- cbd_t *bdp;
- printk(" Ring data dump: cur_tx %p tx_free %d cur_rx %p.\n",
- cep->cur_tx, cep->tx_free,
- cep->cur_rx);
- bdp = cep->tx_bd_base;
- printk(" Tx @base %p :\n", bdp);
- for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
- printk("%04x %04x %08x\n",
- bdp->cbd_sc,
- bdp->cbd_datlen,
- bdp->cbd_bufaddr);
- bdp = cep->rx_bd_base;
- printk(" Rx @base %p :\n", bdp);
- for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
- printk("%04x %04x %08x\n",
- bdp->cbd_sc,
- bdp->cbd_datlen,
- bdp->cbd_bufaddr);
- }
-#endif
- if (cep->tx_free)
- netif_wake_queue(dev);
-}
-
-/* The interrupt handler. */
-static irqreturn_t
-fcc_enet_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- volatile struct fcc_enet_private *cep;
- volatile cbd_t *bdp;
- ushort int_events;
- int must_restart;
-
- cep = dev->priv;
-
- /* Get the interrupt events that caused us to be here.
- */
- int_events = cep->fccp->fcc_fcce;
- cep->fccp->fcc_fcce = (int_events & cep->fccp->fcc_fccm);
- must_restart = 0;
-
-#ifdef PHY_INTERRUPT
- /* We have to be careful here to make sure that we aren't
- * interrupted by a PHY interrupt.
- */
- disable_irq_nosync(PHY_INTERRUPT);
-#endif
-
- /* Handle receive event in its own function.
- */
- if (int_events & FCC_ENET_RXF)
- fcc_enet_rx(dev_id);
-
- /* Check for a transmit error. The manual is a little unclear
- * about this, so the debug code until I get it figured out. It
- * appears that if TXE is set, then TXB is not set. However,
- * if carrier sense is lost during frame transmission, the TXE
- * bit is set, "and continues the buffer transmission normally."
- * I don't know if "normally" implies TXB is set when the buffer
- * descriptor is closed.....trial and error :-).
- */
-
- /* Transmit OK, or non-fatal error. Update the buffer descriptors.
- */
- if (int_events & (FCC_ENET_TXE | FCC_ENET_TXB)) {
- spin_lock(&cep->lock);
- bdp = cep->dirty_tx;
- while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
- if (cep->tx_free == TX_RING_SIZE)
- break;
-
- if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
- cep->stats.tx_heartbeat_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
- cep->stats.tx_window_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
- cep->stats.tx_aborted_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
- cep->stats.tx_fifo_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
- cep->stats.tx_carrier_errors++;
-
-
- /* No heartbeat or Lost carrier are not really bad errors.
- * The others require a restart transmit command.
- */
- if (bdp->cbd_sc &
- (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
- must_restart = 1;
- cep->stats.tx_errors++;
- }
-
- cep->stats.tx_packets++;
-
- /* Deferred means some collisions occurred during transmit,
- * but we eventually sent the packet OK.
- */
- if (bdp->cbd_sc & BD_ENET_TX_DEF)
- cep->stats.collisions++;
-
- /* Free the sk buffer associated with this last transmit. */
- dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
- cep->tx_skbuff[cep->skb_dirty] = NULL;
- cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
- /* Update pointer to next buffer descriptor to be transmitted. */
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
- bdp = cep->tx_bd_base;
- else
- bdp++;
-
- /* I don't know if we can be held off from processing these
- * interrupts for more than one frame time. I really hope
- * not. In such a case, we would now want to check the
- * currently available BD (cur_tx) and determine if any
- * buffers between the dirty_tx and cur_tx have also been
- * sent. We would want to process anything in between that
- * does not have BD_ENET_TX_READY set.
- */
-
- /* Since we have freed up a buffer, the ring is no longer
- * full.
- */
- if (!cep->tx_free++) {
- if (netif_queue_stopped(dev)) {
- netif_wake_queue(dev);
- }
- }
-
- cep->dirty_tx = (cbd_t *)bdp;
- }
-
- if (must_restart) {
- volatile cpm_cpm2_t *cp;
-
- /* Some transmit errors cause the transmitter to shut
- * down. We now issue a restart transmit. Since the
- * errors close the BD and update the pointers, the restart
- * _should_ pick up without having to reset any of our
- * pointers either. Also, To workaround 8260 device erratum
- * CPM37, we must disable and then re-enable the transmitter
- * following a Late Collision, Underrun, or Retry Limit error.
- */
- cep->fccp->fcc_gfmr &= ~FCC_GFMR_ENT;
- udelay(10); /* wait a few microseconds just on principle */
- cep->fccp->fcc_gfmr |= FCC_GFMR_ENT;
-
- cp = cpmp;
- cp->cp_cpcr =
- mk_cr_cmd(cep->fip->fc_cpmpage, cep->fip->fc_cpmblock,
- 0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG);
- }
- spin_unlock(&cep->lock);
- }
-
- /* Check for receive busy, i.e. packets coming but no place to
- * put them.
- */
- if (int_events & FCC_ENET_BSY) {
- cep->fccp->fcc_fcce = FCC_ENET_BSY;
- cep->stats.rx_dropped++;
- }
-
-#ifdef PHY_INTERRUPT
- enable_irq(PHY_INTERRUPT);
-#endif
- return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-fcc_enet_rx(struct net_device *dev)
-{
- struct fcc_enet_private *cep;
- volatile cbd_t *bdp;
- struct sk_buff *skb;
- ushort pkt_len;
-
- cep = dev->priv;
-
- /* First, grab all of the stats for the incoming packet.
- * These get messed up if we get called due to a busy condition.
- */
- bdp = cep->cur_rx;
-
-for (;;) {
- if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
- break;
-
-#ifndef final_version
- /* Since we have allocated space to hold a complete frame, both
- * the first and last indicators should be set.
- */
- if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
- (BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
- printk("CPM ENET: rcv is not first+last\n");
-#endif
-
- /* Frame too long or too short. */
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
- cep->stats.rx_length_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
- cep->stats.rx_frame_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
- cep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
- cep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CL) /* Late Collision */
- cep->stats.rx_frame_errors++;
-
- if (!(bdp->cbd_sc &
- (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR
- | BD_ENET_RX_OV | BD_ENET_RX_CL)))
- {
- /* Process the incoming frame. */
- cep->stats.rx_packets++;
-
- /* Remove the FCS from the packet length. */
- pkt_len = bdp->cbd_datlen - 4;
- cep->stats.rx_bytes += pkt_len;
-
- /* This does 16 byte alignment, much more than we need. */
- skb = dev_alloc_skb(pkt_len);
-
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- cep->stats.rx_dropped++;
- }
- else {
- skb_put(skb,pkt_len); /* Make room */
- skb_copy_to_linear_data(skb,
- (unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len);
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb);
- }
- }
-
- /* Clear the status flags for this buffer. */
- bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
- /* Mark the buffer empty. */
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
- /* Update BD pointer to next entry. */
- if (bdp->cbd_sc & BD_ENET_RX_WRAP)
- bdp = cep->rx_bd_base;
- else
- bdp++;
-
- }
- cep->cur_rx = (cbd_t *)bdp;
-
- return 0;
-}
-
-static int
-fcc_enet_close(struct net_device *dev)
-{
-#ifdef CONFIG_USE_MDIO
- struct fcc_enet_private *fep = dev->priv;
-#endif
-
- netif_stop_queue(dev);
- fcc_stop(dev);
-#ifdef CONFIG_USE_MDIO
- if (fep->phy)
- mii_do_cmd(dev, fep->phy->shutdown);
-#endif
-
- return 0;
-}
-
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev)
-{
- struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
- return &cep->stats;
-}
-
-#ifdef CONFIG_USE_MDIO
-
-/* NOTE: Most of the following comes from the FEC driver for 860. The
- * overall structure of MII code has been retained (as it's proved stable
- * and well-tested), but actual transfer requests are processed "at once"
- * instead of being queued (there's no interrupt-driven MII transfer
- * mechanism, one has to toggle the data/clock bits manually).
- */
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
- struct fcc_enet_private *fep;
- int retval, tmp;
-
- /* Add PHY address to register command. */
- fep = dev->priv;
- regval |= fep->phy_addr << 23;
-
- retval = 0;
-
- tmp = mii_send_receive(fep->fip, regval);
- if (func)
- func(tmp, dev);
-
- return retval;
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
- int k;
-
- if(!c)
- return;
-
- for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
- mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
- if (mii_reg & BMSR_LSTATUS)
- s |= PHY_STAT_LINK;
- if (mii_reg & BMSR_RFAULT)
- s |= PHY_STAT_FAULT;
- if (mii_reg & BMSR_ANEGCOMPLETE)
- s |= PHY_STAT_ANC;
-
- fep->phy_status = s;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
- if (mii_reg & BMCR_ANENABLE)
- s |= PHY_CONF_ANE;
- if (mii_reg & BMCR_LOOPBACK)
- s |= PHY_CONF_LOOP;
-
- fep->phy_status = s;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_CONF_SPMASK);
-
- if (mii_reg & ADVERTISE_10HALF)
- s |= PHY_CONF_10HDX;
- if (mii_reg & ADVERTISE_10FULL)
- s |= PHY_CONF_10FDX;
- if (mii_reg & ADVERTISE_100HALF)
- s |= PHY_CONF_100HDX;
- if (mii_reg & ADVERTISE_100FULL)
- s |= PHY_CONF_100FDX;
-
- fep->phy_status = s;
-}
-
-/* ------------------------------------------------------------------------- */
-/* Generic PHY support. Should work for all PHYs, but does not support link
- * change interrupts.
- */
-#ifdef CONFIG_FCC_GENERIC_PHY
-
-static phy_info_t phy_info_generic = {
- 0x00000000, /* 0-->match any PHY */
- "GENERIC",
-
- (const phy_cmd_t []) { /* config */
- /* advertise only half-duplex capabilities */
- { mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_HALF),
- mii_parse_anar },
-
- /* enable auto-negotiation */
- { mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup */
- /* restart auto-negotiation */
- { mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
- NULL },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* We don't actually use the ack_int table with a generic
- * PHY, but putting a reference to mii_parse_sr here keeps
- * us from getting a compiler warning about unused static
- * functions in the case where we only compile in generic
- * PHY support.
- */
- { mk_mii_read(MII_BMSR), mii_parse_sr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown */
- { mk_mii_end, }
- },
-};
-#endif /* ifdef CONFIG_FCC_GENERIC_PHY */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards */
-
-#ifdef CONFIG_FCC_LXT970
-
-#define MII_LXT970_MIRROR 16 /* Mirror register */
-#define MII_LXT970_IER 17 /* Interrupt Enable Register */
-#define MII_LXT970_ISR 18 /* Interrupt Status Register */
-#define MII_LXT970_CONFIG 19 /* Configuration Register */
-#define MII_LXT970_CSR 20 /* Chip Status Register */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
-
- if (mii_reg & 0x0800) {
- if (mii_reg & 0x1000)
- s |= PHY_STAT_100FDX;
- else
- s |= PHY_STAT_100HDX;
- } else {
- if (mii_reg & 0x1000)
- s |= PHY_STAT_10FDX;
- else
- s |= PHY_STAT_10HDX;
- }
-
- fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt970 = {
- 0x07810000,
- "LXT970",
-
- (const phy_cmd_t []) { /* config */
-#if 0
-// { mk_mii_write(MII_ADVERTISE, 0x0021), NULL },
-
- /* Set default operation of 100-TX....for some reason
- * some of these bits are set on power up, which is wrong.
- */
- { mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
- { mk_mii_read(MII_BMCR), mii_parse_cr },
- { mk_mii_read(MII_ADVERTISE), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
- { mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* read SR and ISR to acknowledge */
-
- { mk_mii_read(MII_BMSR), mii_parse_sr },
- { mk_mii_read(MII_LXT970_ISR), NULL },
-
- /* find out the current status */
-
- { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards */
-
-#ifdef CONFIG_FCC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR 16 /* Port Control Register */
-#define MII_LXT971_SR2 17 /* Status Register 2 */
-#define MII_LXT971_IER 18 /* Interrupt Enable Register */
-#define MII_LXT971_ISR 19 /* Interrupt Status Register */
-#define MII_LXT971_LCR 20 /* LED Control Register */
-#define MII_LXT971_TCR 30 /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
-
- if (mii_reg & 0x4000) {
- if (mii_reg & 0x0200)
- s |= PHY_STAT_100FDX;
- else
- s |= PHY_STAT_100HDX;
- } else {
- if (mii_reg & 0x0200)
- s |= PHY_STAT_10FDX;
- else
- s |= PHY_STAT_10HDX;
- }
- if (mii_reg & 0x0008)
- s |= PHY_STAT_FAULT;
-
- fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt971 = {
- 0x0001378e,
- "LXT971",
-
- (const phy_cmd_t []) { /* config */
- /* configure link capabilities to advertise */
- { mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_DEFAULT),
- mii_parse_anar },
-
- /* enable auto-negotiation */
- { mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-
- /* restart auto-negotiation */
- { mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
- NULL },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* find out the current status */
- { mk_mii_read(MII_BMSR), NULL },
- { mk_mii_read(MII_BMSR), mii_parse_sr },
- { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
- /* we only need to read ISR to acknowledge */
- { mk_mii_read(MII_LXT971_ISR), NULL },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FCC_LXT971 */
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
-
-#ifdef CONFIG_FCC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR 17 /* Mode Control Register */
-#define MII_QS6612_FTR 27 /* Factory Test Register */
-#define MII_QS6612_MCO 28 /* Misc. Control Register */
-#define MII_QS6612_ISR 29 /* Interrupt Source Register */
-#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
-#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
-
- switch((mii_reg >> 2) & 7) {
- case 1: s |= PHY_STAT_10HDX; break;
- case 2: s |= PHY_STAT_100HDX; break;
- case 5: s |= PHY_STAT_10FDX; break;
- case 6: s |= PHY_STAT_100FDX; break;
- }
-
- fep->phy_status = s;
-}
-
-static phy_info_t phy_info_qs6612 = {
- 0x00181440,
- "QS6612",
-
- (const phy_cmd_t []) { /* config */
-// { mk_mii_write(MII_ADVERTISE, 0x061), NULL }, /* 10 Mbps */
-
- /* The PHY powers up isolated on the RPX,
- * so send a command to allow operation.
- */
-
- { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
- /* parse cr and anar to get some info */
-
- { mk_mii_read(MII_BMCR), mii_parse_cr },
- { mk_mii_read(MII_ADVERTISE), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
- { mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
-
- /* we need to read ISR, SR and ANER to acknowledge */
-
- { mk_mii_read(MII_QS6612_ISR), NULL },
- { mk_mii_read(MII_BMSR), mii_parse_sr },
- { mk_mii_read(MII_EXPANSION), NULL },
-
- /* read pcr to get info */
-
- { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-
-#endif /* CONFIG_FEC_QS6612 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Davicom DM9131 is used on the HYMOD board */
-
-#ifdef CONFIG_FCC_DM9131
-
-/* register definitions */
-
-#define MII_DM9131_ACR 16 /* Aux. Config Register */
-#define MII_DM9131_ACSR 17 /* Aux. Config/Status Register */
-#define MII_DM9131_10TCSR 18 /* 10BaseT Config/Status Reg. */
-#define MII_DM9131_INTR 21 /* Interrupt Register */
-#define MII_DM9131_RECR 22 /* Receive Error Counter Reg. */
-#define MII_DM9131_DISCR 23 /* Disconnect Counter Register */
-
-static void mii_parse_dm9131_acsr(uint mii_reg, struct net_device *dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
-
- switch ((mii_reg >> 12) & 0xf) {
- case 1: s |= PHY_STAT_10HDX; break;
- case 2: s |= PHY_STAT_10FDX; break;
- case 4: s |= PHY_STAT_100HDX; break;
- case 8: s |= PHY_STAT_100FDX; break;
- }
-
- fep->phy_status = s;
-}
-
-static phy_info_t phy_info_dm9131 = {
- 0x00181b80,
- "DM9131",
-
- (const phy_cmd_t []) { /* config */
- /* parse cr and anar to get some info */
- { mk_mii_read(MII_BMCR), mii_parse_cr },
- { mk_mii_read(MII_ADVERTISE), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_DM9131_INTR, 0x0002), NULL },
- { mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
-
- /* we need to read INTR, SR and ANER to acknowledge */
-
- { mk_mii_read(MII_DM9131_INTR), NULL },
- { mk_mii_read(MII_BMSR), mii_parse_sr },
- { mk_mii_read(MII_EXPANSION), NULL },
-
- /* read acsr to get info */
-
- { mk_mii_read(MII_DM9131_ACSR), mii_parse_dm9131_acsr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_DM9131_INTR, 0x0f00), NULL },
- { mk_mii_end, }
- },
-};
-
-
-#endif /* CONFIG_FEC_DM9131 */
-#ifdef CONFIG_FCC_DM9161
-/* ------------------------------------------------------------------------- */
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP 0x0400
-#define MIIM_DM9161_CR_RSTAN 0x1200
-
-#define MIIM_DM9161_SCR 0x10
-#define MIIM_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR 0x11
-#define MIIM_DM9161_SCSR_100F 0x8000
-#define MIIM_DM9161_SCSR_100H 0x4000
-#define MIIM_DM9161_SCSR_10F 0x2000
-#define MIIM_DM9161_SCSR_10H 0x1000
-/* DM9161 10BT register */
-#define MIIM_DM9161_10BTCSR 0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-/* DM9161 Interrupt Register */
-#define MIIM_DM9161_INTR 0x15
-#define MIIM_DM9161_INTR_PEND 0x8000
-#define MIIM_DM9161_INTR_DPLX_MASK 0x0800
-#define MIIM_DM9161_INTR_SPD_MASK 0x0400
-#define MIIM_DM9161_INTR_LINK_MASK 0x0200
-#define MIIM_DM9161_INTR_MASK 0x0100
-#define MIIM_DM9161_INTR_DPLX_CHANGE 0x0010
-#define MIIM_DM9161_INTR_SPD_CHANGE 0x0008
-#define MIIM_DM9161_INTR_LINK_CHANGE 0x0004
-#define MIIM_DM9161_INTR_INIT 0x0000
-#define MIIM_DM9161_INTR_STOP \
-(MIIM_DM9161_INTR_DPLX_MASK | MIIM_DM9161_INTR_SPD_MASK \
- | MIIM_DM9161_INTR_LINK_MASK | MIIM_DM9161_INTR_MASK)
-
-static void mii_parse_dm9161_sr(uint mii_reg, struct net_device * dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint regstat, timeout=0xffff;
-
- while(!(mii_reg & 0x0020) && timeout--)
- {
- regstat=mk_mii_read(MII_BMSR);
- regstat |= fep->phy_addr <<23;
- mii_reg = mii_send_receive(fep->fip,regstat);
- }
-
- mii_parse_sr(mii_reg, dev);
-}
-
-static void mii_parse_dm9161_scsr(uint mii_reg, struct net_device * dev)
-{
- volatile struct fcc_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
- switch((mii_reg >>12) & 0xf) {
- case 1:
- {
- s |= PHY_STAT_10HDX;
- printk("10BaseT Half Duplex\n");
- break;
- }
- case 2:
- {
- s |= PHY_STAT_10FDX;
- printk("10BaseT Full Duplex\n");
- break;
- }
- case 4:
- {
- s |= PHY_STAT_100HDX;
- printk("100BaseT Half Duplex\n");
- break;
- }
- case 8:
- {
- s |= PHY_STAT_100FDX;
- printk("100BaseT Full Duplex\n");
- break;
- }
- }
-
- fep->phy_status = s;
-
-}
-
-static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
-{
- int timeout = HZ;
-
- /* Davicom takes a bit to come up after a reset,
- * so wait here for a bit */
- schedule_timeout_uninterruptible(timeout);
-}
-
-static phy_info_t phy_info_dm9161 = {
- 0x00181b88,
- "Davicom DM9161E",
- (const phy_cmd_t[]) { /* config */
- { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_STOP), NULL},
- /* Do not bypass the scrambler/descrambler */
- { mk_mii_write(MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT), NULL},
- /* Configure 10BTCSR register */
- { mk_mii_write(MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT),NULL},
- /* Configure some basic stuff */
- { mk_mii_write(MII_BMCR, 0x1000), NULL},
- { mk_mii_read(MII_BMCR), mii_parse_cr },
- { mk_mii_read(MII_ADVERTISE), mii_parse_anar },
- { mk_mii_end,}
- },
- (const phy_cmd_t[]) { /* startup */
- /* Restart Auto Negotiation */
- { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_RSTAN), NULL},
- /* Status is read once to clear old link state */
- { mk_mii_read(MII_BMSR), mii_dm9161_wait},
- /* Auto-negotiate */
- { mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
- /* Read the status */
- { mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
- /* Clear any pending interrupts */
- { mk_mii_read(MIIM_DM9161_INTR), NULL},
- /* Enable Interrupts */
- { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_INIT), NULL},
- { mk_mii_end,}
- },
- (const phy_cmd_t[]) { /* ack_int */
- { mk_mii_read(MIIM_DM9161_INTR), NULL},
-#if 0
- { mk_mii_read(MII_BMSR), NULL},
- { mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
- { mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-#endif
- { mk_mii_end,}
- },
- (const phy_cmd_t[]) { /* shutdown */
- { mk_mii_read(MIIM_DM9161_INTR),NULL},
- { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_STOP), NULL},
- { mk_mii_end,}
- },
-};
-#endif /* CONFIG_FCC_DM9161 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FCC_LXT970
- &phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FCC_LXT971
- &phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FCC_QS6612
- &phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FCC_DM9131
- &phy_info_dm9131,
-#endif /* CONFIG_FEC_DM9131 */
-
-#ifdef CONFIG_FCC_DM9161
- &phy_info_dm9161,
-#endif /* CONFIG_FCC_DM9161 */
-
-#ifdef CONFIG_FCC_GENERIC_PHY
- /* Generic PHY support. This must be the last PHY in the table.
- * It will be used to support any PHY that doesn't match a previous
- * entry in the table.
- */
- &phy_info_generic,
-#endif /* CONFIG_FCC_GENERIC_PHY */
-
- NULL
-};
-
-static void mii_display_status(struct work_struct *work)
-{
- volatile struct fcc_enet_private *fep =
- container_of(work, struct fcc_enet_private, phy_relink);
- struct net_device *dev = fep->dev;
- uint s = fep->phy_status;
-
- if (!fep->link && !fep->old_link) {
- /* Link is still down - don't print anything */
- return;
- }
-
- printk("%s: status: ", dev->name);
-
- if (!fep->link) {
- printk("link down");
- } else {
- printk("link up");
-
- switch(s & PHY_STAT_SPMASK) {
- case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
- case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
- case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
- case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
- default:
- printk(", Unknown speed/duplex");
- }
-
- if (s & PHY_STAT_ANC)
- printk(", auto-negotiation complete");
- }
-
- if (s & PHY_STAT_FAULT)
- printk(", remote fault");
-
- printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
- volatile struct fcc_enet_private *fep =
- container_of(work, struct fcc_enet_private,
- phy_display_config);
- struct net_device *dev = fep->dev;
- uint s = fep->phy_status;
-
- printk("%s: config: auto-negotiation ", dev->name);
-
- if (s & PHY_CONF_ANE)
- printk("on");
- else
- printk("off");
-
- if (s & PHY_CONF_100FDX)
- printk(", 100FDX");
- if (s & PHY_CONF_100HDX)
- printk(", 100HDX");
- if (s & PHY_CONF_10FDX)
- printk(", 10FDX");
- if (s & PHY_CONF_10HDX)
- printk(", 10HDX");
- if (!(s & PHY_CONF_SPMASK))
- printk(", No speed/duplex selected?");
-
- if (s & PHY_CONF_LOOP)
- printk(", loopback enabled");
-
- printk(".\n");
-
- fep->sequence_done = 1;
-}
-
-static void mii_relink(struct net_device *dev)
-{
- struct fcc_enet_private *fep = dev->priv;
- int duplex = 0;
-
- fep->old_link = fep->link;
- fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-
-#ifdef MDIO_DEBUG
- printk(" mii_relink: link=%d\n", fep->link);
-#endif
-
- if (fep->link) {
- if (fep->phy_status
- & (PHY_STAT_100FDX | PHY_STAT_10FDX))
- duplex = 1;
- fcc_restart(dev, duplex);
-#ifdef MDIO_DEBUG
- printk(" mii_relink: duplex=%d\n", duplex);
-#endif
- }
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
- struct fcc_enet_private *fep = dev->priv;
-
- mii_relink(dev);
-
- schedule_work(&fep->phy_relink);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
- struct fcc_enet_private *fep = dev->priv;
-
- schedule_work(&fep->phy_display_config);
-}
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_BMCR), mii_queue_relink },
- { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_BMCR), mii_queue_config },
- { mk_mii_end, } };
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
- struct fcc_enet_private *fep;
- int i;
-
- fep = dev->priv;
- printk("mii_reg: %08x\n", mii_reg);
- fep->phy_id |= (mii_reg & 0xffff);
-
- for(i = 0; phy_info[i]; i++)
- if((phy_info[i]->id == (fep->phy_id >> 4)) || !phy_info[i]->id)
- break;
-
- if(!phy_info[i])
- panic("%s: PHY id 0x%08x is not supported!\n",
- dev->name, fep->phy_id);
-
- fep->phy = phy_info[i];
- fep->phy_id_done = 1;
-
- printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
- dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID. This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
- struct fcc_enet_private *fep;
- uint phytype;
-
- fep = dev->priv;
-
- if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
- /* Got first part of ID, now get remainder. */
- fep->phy_id = phytype << 16;
- mii_queue(dev, mk_mii_read(MII_PHYSID2), mii_discover_phy3);
- } else {
- fep->phy_addr++;
- if (fep->phy_addr < 32) {
- mii_queue(dev, mk_mii_read(MII_PHYSID1),
- mii_discover_phy);
- } else {
- printk("fec: No PHY device found.\n");
- }
- }
-}
-#endif /* CONFIG_USE_MDIO */
-
-#ifdef PHY_INTERRUPT
-/* This interrupt occurs when the PHY detects a link change. */
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id)
-{
- struct net_device *dev = dev_id;
- struct fcc_enet_private *fep = dev->priv;
- fcc_info_t *fip = fep->fip;
-
- if (fep->phy) {
- /* We don't want to be interrupted by an FCC
- * interrupt here.
- */
- disable_irq_nosync(fip->fc_interrupt);
-
- mii_do_cmd(dev, fep->phy->ack_int);
- /* restart and display status */
- mii_do_cmd(dev, phy_cmd_relink);
-
- enable_irq(fip->fc_interrupt);
- }
- return IRQ_HANDLED;
-}
-#endif /* ifdef PHY_INTERRUPT */
-
-#if 0 /* This should be fixed someday */
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering. Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not. I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
- struct fcc_enet_private *cep;
- struct dev_mc_list *dmi;
- u_char *mcptr, *tdptr;
- volatile fcc_enet_t *ep;
- int i, j;
-
- cep = (struct fcc_enet_private *)dev->priv;
-
-return;
- /* Get pointer to FCC area in parameter RAM.
- */
- ep = (fcc_enet_t *)dev->base_addr;
-
- if (dev->flags&IFF_PROMISC) {
-
- /* Log any net taps. */
- printk("%s: Promiscuous mode enabled.\n", dev->name);
- cep->fccp->fcc_fpsmr |= FCC_PSMR_PRO;
- } else {
-
- cep->fccp->fcc_fpsmr &= ~FCC_PSMR_PRO;
-
- if (dev->flags & IFF_ALLMULTI) {
- /* Catch all multicast addresses, so set the
- * filter to all 1's.
- */
- ep->fen_gaddrh = 0xffffffff;
- ep->fen_gaddrl = 0xffffffff;
- }
- else {
- /* Clear filter and add the addresses in the list.
- */
- ep->fen_gaddrh = 0;
- ep->fen_gaddrl = 0;
-
- dmi = dev->mc_list;
-
- for (i=0; i<dev->mc_count; i++, dmi = dmi->next) {
-
- /* Only support group multicast for now.
- */
- if (!(dmi->dmi_addr[0] & 1))
- continue;
-
- /* The address in dmi_addr is LSB first,
- * and taddr is MSB first. We have to
- * copy bytes MSB first from dmi_addr.
- */
- mcptr = (u_char *)dmi->dmi_addr + 5;
- tdptr = (u_char *)&ep->fen_taddrh;
- for (j=0; j<6; j++)
- *tdptr++ = *mcptr--;
-
- /* Ask CPM to run CRC and set bit in
- * filter mask.
- */
- cpmp->cp_cpcr = mk_cr_cmd(cep->fip->fc_cpmpage,
- cep->fip->fc_cpmblock, 0x0c,
- CPM_CR_SET_GADDR) | CPM_CR_FLG;
- udelay(10);
- while (cpmp->cp_cpcr & CPM_CR_FLG);
- }
- }
- }
-}
-#endif /* if 0 */
-
-
-/* Set the individual MAC address.
- */
-int fcc_enet_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr= (struct sockaddr *) p;
- struct fcc_enet_private *cep;
- volatile fcc_enet_t *ep;
- unsigned char *eap;
- int i;
-
- cep = (struct fcc_enet_private *)(dev->priv);
- ep = cep->ep;
-
- if (netif_running(dev))
- return -EBUSY;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
- eap = (unsigned char *) &(ep->fen_paddrh);
- for (i=5; i>=0; i--)
- *eap++ = addr->sa_data[i];
-
- return 0;
-}
-
-
-/* Initialize the CPM Ethernet on FCC.
- */
-static int __init fec_enet_init(void)
-{
- struct net_device *dev;
- struct fcc_enet_private *cep;
- fcc_info_t *fip;
- int i, np, err;
- volatile cpm2_map_t *immap;
- volatile iop_cpm2_t *io;
-
- immap = (cpm2_map_t *)CPM_MAP_ADDR; /* and to internal registers */
- io = &immap->im_ioport;
-
- np = sizeof(fcc_ports) / sizeof(fcc_info_t);
- fip = fcc_ports;
-
- while (np-- > 0) {
- /* Create an Ethernet device instance.
- */
- dev = alloc_etherdev(sizeof(*cep));
- if (!dev)
- return -ENOMEM;
-
- cep = dev->priv;
- spin_lock_init(&cep->lock);
- cep->fip = fip;
-
- init_fcc_shutdown(fip, cep, immap);
- init_fcc_ioports(fip, io, immap);
- init_fcc_param(fip, dev, immap);
-
- dev->base_addr = (unsigned long)(cep->ep);
-
- /* The CPM Ethernet specific entries in the device
- * structure.
- */
- dev->open = fcc_enet_open;
- dev->hard_start_xmit = fcc_enet_start_xmit;
- dev->tx_timeout = fcc_enet_timeout;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->stop = fcc_enet_close;
- dev->get_stats = fcc_enet_get_stats;
- /* dev->set_multicast_list = set_multicast_list; */
- dev->set_mac_address = fcc_enet_set_mac_address;
-
- init_fcc_startup(fip, dev);
-
- err = register_netdev(dev);
- if (err) {
- free_netdev(dev);
- return err;
- }
-
- printk("%s: FCC ENET Version 0.3, ", dev->name);
- for (i=0; i<5; i++)
- printk("%02x:", dev->dev_addr[i]);
- printk("%02x\n", dev->dev_addr[5]);
-
-#ifdef CONFIG_USE_MDIO
- /* Queue up command to detect the PHY and initialize the
- * remainder of the interface.
- */
- cep->phy_id_done = 0;
- cep->phy_addr = fip->fc_phyaddr;
- mii_queue(dev, mk_mii_read(MII_PHYSID1), mii_discover_phy);
- INIT_WORK(&cep->phy_relink, mii_display_status);
- INIT_WORK(&cep->phy_display_config, mii_display_config);
- cep->dev = dev;
-#endif /* CONFIG_USE_MDIO */
-
- fip++;
- }
-
- return 0;
-}
-module_init(fec_enet_init);
-
-/* Make sure the device is shut down during initialization.
-*/
-static void __init
-init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
- volatile cpm2_map_t *immap)
-{
- volatile fcc_enet_t *ep;
- volatile fcc_t *fccp;
-
- /* Get pointer to FCC area in parameter RAM.
- */
- ep = (fcc_enet_t *)(&immap->im_dprambase[fip->fc_proff]);
-
- /* And another to the FCC register area.
- */
- fccp = (volatile fcc_t *)(&immap->im_fcc[fip->fc_fccnum]);
- cep->fccp = fccp; /* Keep the pointers handy */
- cep->ep = ep;
-
- /* Disable receive and transmit in case someone left it running.
- */
- fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-}
-
-/* Initialize the I/O pins for the FCC Ethernet.
-*/
-static void __init
-init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
- volatile cpm2_map_t *immap)
-{
-
- /* FCC1 pins are on port A/C. FCC2/3 are port B/C.
- */
- if (fip->fc_proff == PROFF_FCC1) {
- /* Configure port A and C pins for FCC1 Ethernet.
- */
- io->iop_pdira &= ~PA1_DIRA_BOUT;
- io->iop_pdira |= PA1_DIRA_BIN;
- io->iop_psora &= ~PA1_PSORA_BOUT;
- io->iop_psora |= PA1_PSORA_BIN;
- io->iop_ppara |= (PA1_DIRA_BOUT | PA1_DIRA_BIN);
- }
- if (fip->fc_proff == PROFF_FCC2) {
- /* Configure port B and C pins for FCC Ethernet.
- */
- io->iop_pdirb &= ~PB2_DIRB_BOUT;
- io->iop_pdirb |= PB2_DIRB_BIN;
- io->iop_psorb &= ~PB2_PSORB_BOUT;
- io->iop_psorb |= PB2_PSORB_BIN;
- io->iop_pparb |= (PB2_DIRB_BOUT | PB2_DIRB_BIN);
- }
- if (fip->fc_proff == PROFF_FCC3) {
- /* Configure port B and C pins for FCC Ethernet.
- */
- io->iop_pdirb &= ~PB3_DIRB_BOUT;
- io->iop_pdirb |= PB3_DIRB_BIN;
- io->iop_psorb &= ~PB3_PSORB_BOUT;
- io->iop_psorb |= PB3_PSORB_BIN;
- io->iop_pparb |= (PB3_DIRB_BOUT | PB3_DIRB_BIN);
-
- io->iop_pdirc &= ~PC3_DIRC_BOUT;
- io->iop_pdirc |= PC3_DIRC_BIN;
- io->iop_psorc &= ~PC3_PSORC_BOUT;
- io->iop_psorc |= PC3_PSORC_BIN;
- io->iop_pparc |= (PC3_DIRC_BOUT | PC3_DIRC_BIN);
-
- }
-
- /* Port C has clocks......
- */
- io->iop_psorc &= ~(fip->fc_trxclocks);
- io->iop_pdirc &= ~(fip->fc_trxclocks);
- io->iop_pparc |= fip->fc_trxclocks;
-
-#ifdef CONFIG_USE_MDIO
- /* ....and the MII serial clock/data.
- */
- io->iop_pdatc |= (fip->fc_mdio | fip->fc_mdck);
- io->iop_podrc &= ~(fip->fc_mdio | fip->fc_mdck);
- io->iop_pdirc |= (fip->fc_mdio | fip->fc_mdck);
- io->iop_pparc &= ~(fip->fc_mdio | fip->fc_mdck);
-#endif /* CONFIG_USE_MDIO */
-
- /* Configure Serial Interface clock routing.
- * First, clear all FCC bits to zero,
- * then set the ones we want.
- */
- immap->im_cpmux.cmx_fcr &= ~(fip->fc_clockmask);
- immap->im_cpmux.cmx_fcr |= fip->fc_clockroute;
-}
-
-static void __init
-init_fcc_param(fcc_info_t *fip, struct net_device *dev,
- volatile cpm2_map_t *immap)
-{
- unsigned char *eap;
- unsigned long mem_addr;
- bd_t *bd;
- int i, j;
- struct fcc_enet_private *cep;
- volatile fcc_enet_t *ep;
- volatile cbd_t *bdp;
- volatile cpm_cpm2_t *cp;
-
- cep = (struct fcc_enet_private *)(dev->priv);
- ep = cep->ep;
- cp = cpmp;
-
- bd = (bd_t *)__res;
-
- /* Zero the whole thing.....I must have missed some individually.
- * It works when I do this.
- */
- memset((char *)ep, 0, sizeof(fcc_enet_t));
-
- /* Allocate space for the buffer descriptors from regular memory.
- * Initialize base addresses for the buffer descriptors.
- */
- cep->rx_bd_base = kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
- GFP_KERNEL | GFP_DMA);
- ep->fen_genfcc.fcc_rbase = __pa(cep->rx_bd_base);
- cep->tx_bd_base = kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
- GFP_KERNEL | GFP_DMA);
- ep->fen_genfcc.fcc_tbase = __pa(cep->tx_bd_base);
-
- cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
- cep->cur_rx = cep->rx_bd_base;
-
- ep->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
- ep->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-
- /* Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- */
- ep->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
-
- /* Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- */
- mem_addr = CPM_FCC_SPECIAL_BASE + (fip->fc_fccnum * 128);
- ep->fen_genfcc.fcc_riptr = mem_addr;
- ep->fen_genfcc.fcc_tiptr = mem_addr+32;
- ep->fen_padptr = mem_addr+64;
- memset((char *)(&(immap->im_dprambase[(mem_addr+64)])), 0x88, 32);
-
- ep->fen_genfcc.fcc_rbptr = 0;
- ep->fen_genfcc.fcc_tbptr = 0;
- ep->fen_genfcc.fcc_rcrc = 0;
- ep->fen_genfcc.fcc_tcrc = 0;
- ep->fen_genfcc.fcc_res1 = 0;
- ep->fen_genfcc.fcc_res2 = 0;
-
- ep->fen_camptr = 0; /* CAM isn't used in this driver */
-
- /* Set CRC preset and mask.
- */
- ep->fen_cmask = 0xdebb20e3;
- ep->fen_cpres = 0xffffffff;
-
- ep->fen_crcec = 0; /* CRC Error counter */
- ep->fen_alec = 0; /* alignment error counter */
- ep->fen_disfc = 0; /* discard frame counter */
- ep->fen_retlim = 15; /* Retry limit threshold */
- ep->fen_pper = 0; /* Normal persistence */
-
- /* Clear hash filter tables.
- */
- ep->fen_gaddrh = 0;
- ep->fen_gaddrl = 0;
- ep->fen_iaddrh = 0;
- ep->fen_iaddrl = 0;
-
- /* Clear the Out-of-sequence TxBD.
- */
- ep->fen_tfcstat = 0;
- ep->fen_tfclen = 0;
- ep->fen_tfcptr = 0;
-
- ep->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
- ep->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
-
- /* Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So, far we have only been given one Ethernet address. We make
- * it unique by setting a few bits in the upper byte of the
- * non-static part of the address.
- */
- eap = (unsigned char *)&(ep->fen_paddrh);
- for (i=5; i>=0; i--) {
-
-/*
- * The EP8260 only uses FCC3, so we can safely give it the real
- * MAC address.
- */
-#ifdef CONFIG_SBC82xx
- if (i == 5) {
- /* bd->bi_enetaddr holds the SCC0 address; the FCC
- devices count up from there */
- dev->dev_addr[i] = bd->bi_enetaddr[i] & ~3;
- dev->dev_addr[i] += 1 + fip->fc_fccnum;
- *eap++ = dev->dev_addr[i];
- }
-#else
-#ifndef CONFIG_RPX8260
- if (i == 3) {
- dev->dev_addr[i] = bd->bi_enetaddr[i];
- dev->dev_addr[i] |= (1 << (7 - fip->fc_fccnum));
- *eap++ = dev->dev_addr[i];
- } else
-#endif
- {
- *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
- }
-#endif
- }
-
- ep->fen_taddrh = 0;
- ep->fen_taddrm = 0;
- ep->fen_taddrl = 0;
-
- ep->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */
- ep->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */
-
- /* Clear stat counters, in case we ever enable RMON.
- */
- ep->fen_octc = 0;
- ep->fen_colc = 0;
- ep->fen_broc = 0;
- ep->fen_mulc = 0;
- ep->fen_uspc = 0;
- ep->fen_frgc = 0;
- ep->fen_ospc = 0;
- ep->fen_jbrc = 0;
- ep->fen_p64c = 0;
- ep->fen_p65c = 0;
- ep->fen_p128c = 0;
- ep->fen_p256c = 0;
- ep->fen_p512c = 0;
- ep->fen_p1024c = 0;
-
- ep->fen_rfthr = 0; /* Suggested by manual */
- ep->fen_rfcnt = 0;
- ep->fen_cftype = 0;
-
- /* Now allocate the host memory pages and initialize the
- * buffer descriptors.
- */
- bdp = cep->tx_bd_base;
- for (i=0; i<TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page.
- */
- bdp->cbd_sc = 0;
- bdp->cbd_datlen = 0;
- bdp->cbd_bufaddr = 0;
- bdp++;
- }
-
- /* Set the last buffer to wrap.
- */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-
- bdp = cep->rx_bd_base;
- for (i=0; i<FCC_ENET_RX_PAGES; i++) {
-
- /* Allocate a page.
- */
- mem_addr = __get_free_page(GFP_KERNEL);
-
- /* Initialize the BD for every fragment in the page.
- */
- for (j=0; j<FCC_ENET_RX_FRPPG; j++) {
- bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
- bdp->cbd_datlen = 0;
- bdp->cbd_bufaddr = __pa(mem_addr);
- mem_addr += FCC_ENET_RX_FRSIZE;
- bdp++;
- }
- }
-
- /* Set the last buffer to wrap.
- */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock, 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG);
-
- cep->skb_cur = cep->skb_dirty = 0;
-}
-
-/* Let 'er rip.
-*/
-static void __init
-init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
-{
- volatile fcc_t *fccp;
- struct fcc_enet_private *cep;
-
- cep = (struct fcc_enet_private *)(dev->priv);
- fccp = cep->fccp;
-
-#ifdef CONFIG_RPX8260
-#ifdef PHY_INTERRUPT
- /* Route PHY interrupt to IRQ. The following code only works for
- * IRQ1 - IRQ7. It does not work for Port C interrupts.
- */
- *((volatile u_char *) (RPX_CSR_ADDR + 13)) &= ~BCSR13_FETH_IRQMASK;
- *((volatile u_char *) (RPX_CSR_ADDR + 13)) |=
- ((PHY_INTERRUPT - SIU_INT_IRQ1 + 1) << 4);
-#endif
- /* Initialize MDIO pins. */
- *((volatile u_char *) (RPX_CSR_ADDR + 4)) &= ~BCSR4_MII_MDC;
- *((volatile u_char *) (RPX_CSR_ADDR + 4)) |=
- BCSR4_MII_READ | BCSR4_MII_MDIO;
- /* Enable external LXT971 PHY. */
- *((volatile u_char *) (RPX_CSR_ADDR + 4)) |= BCSR4_EN_PHY;
- udelay(1000);
- *((volatile u_char *) (RPX_CSR_ADDR+ 4)) |= BCSR4_EN_MII;
- udelay(1000);
-#endif /* ifdef CONFIG_RPX8260 */
-
- fccp->fcc_fcce = 0xffff; /* Clear any pending events */
-
- /* Leave FCC interrupts masked for now. Will be unmasked by
- * fcc_restart().
- */
- fccp->fcc_fccm = 0;
-
- /* Install our interrupt handler.
- */
- if (request_irq(fip->fc_interrupt, fcc_enet_interrupt, 0, "fenet",
- dev) < 0)
- printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
-
-#ifdef PHY_INTERRUPT
- /* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is
- * on Port C.
- */
- ((volatile cpm2_map_t *) CPM_MAP_ADDR)->im_intctl.ic_siexr |=
- (1 << (14 - (PHY_INTERRUPT - SIU_INT_IRQ1)));
-
- if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
- "mii", dev) < 0)
- printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#endif /* PHY_INTERRUPT */
-
- /* Set GFMR to enable Ethernet operating mode.
- */
- fccp->fcc_gfmr = (FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
-
- /* Set sync/delimiters.
- */
- fccp->fcc_fdsr = 0xd555;
-
- /* Set protocol specific processing mode for Ethernet.
- * This has to be adjusted for Full Duplex operation after we can
- * determine how to detect that.
- */
- fccp->fcc_fpsmr = FCC_PSMR_ENCRC;
-
-#ifdef CONFIG_PQ2ADS
- /* Enable the PHY. */
- *(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
- *(volatile uint *)(BCSR_ADDR + 4) |= BCSR1_FETH_RST;
-#endif
-#if defined(CONFIG_PQ2ADS) || defined(CONFIG_PQ2FADS)
- /* Enable the 2nd PHY. */
- *(volatile uint *)(BCSR_ADDR + 12) &= ~BCSR3_FETHIEN2;
- *(volatile uint *)(BCSR_ADDR + 12) |= BCSR3_FETH2_RST;
-#endif
-
-#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260)
- /* start in full duplex mode, and negotiate speed
- */
- fcc_restart (dev, 1);
-#else
- /* start in half duplex mode
- */
- fcc_restart (dev, 0);
-#endif
-}
-
-#ifdef CONFIG_USE_MDIO
-/* MII command/status interface.
- * I'm not going to describe all of the details. You can find the
- * protocol definition in many other places, including the data sheet
- * of most PHY parts.
- * I wonder what "they" were thinking (maybe weren't) when they leave
- * the I2C in the CPM but I have to toggle these bits......
- */
-#ifdef CONFIG_RPX8260
- /* The EP8260 has the MDIO pins in a BCSR instead of on Port C
- * like most other boards.
- */
-#define MDIO_ADDR ((volatile u_char *)(RPX_CSR_ADDR + 4))
-#define MAKE_MDIO_OUTPUT *MDIO_ADDR &= ~BCSR4_MII_READ
-#define MAKE_MDIO_INPUT *MDIO_ADDR |= BCSR4_MII_READ | BCSR4_MII_MDIO
-#define OUT_MDIO(bit) \
- if (bit) \
- *MDIO_ADDR |= BCSR4_MII_MDIO; \
- else \
- *MDIO_ADDR &= ~BCSR4_MII_MDIO;
-#define IN_MDIO (*MDIO_ADDR & BCSR4_MII_MDIO)
-#define OUT_MDC(bit) \
- if (bit) \
- *MDIO_ADDR |= BCSR4_MII_MDC; \
- else \
- *MDIO_ADDR &= ~BCSR4_MII_MDC;
-#else /* ifdef CONFIG_RPX8260 */
- /* This is for the usual case where the MDIO pins are on Port C.
- */
-#define MDIO_ADDR (((volatile cpm2_map_t *)CPM_MAP_ADDR)->im_ioport)
-#define MAKE_MDIO_OUTPUT MDIO_ADDR.iop_pdirc |= fip->fc_mdio
-#define MAKE_MDIO_INPUT MDIO_ADDR.iop_pdirc &= ~fip->fc_mdio
-#define OUT_MDIO(bit) \
- if (bit) \
- MDIO_ADDR.iop_pdatc |= fip->fc_mdio; \
- else \
- MDIO_ADDR.iop_pdatc &= ~fip->fc_mdio;
-#define IN_MDIO ((MDIO_ADDR.iop_pdatc) & fip->fc_mdio)
-#define OUT_MDC(bit) \
- if (bit) \
- MDIO_ADDR.iop_pdatc |= fip->fc_mdck; \
- else \
- MDIO_ADDR.iop_pdatc &= ~fip->fc_mdck;
-#endif /* ifdef CONFIG_RPX8260 */
-
-static uint
-mii_send_receive(fcc_info_t *fip, uint cmd)
-{
- uint retval;
- int read_op, i, off;
- const int us = 1;
-
- read_op = ((cmd & 0xf0000000) == 0x60000000);
-
- /* Write preamble
- */
- OUT_MDIO(1);
- MAKE_MDIO_OUTPUT;
- OUT_MDIO(1);
- for (i = 0; i < 32; i++)
- {
- udelay(us);
- OUT_MDC(1);
- udelay(us);
- OUT_MDC(0);
- }
-
- /* Write data
- */
- for (i = 0, off = 31; i < (read_op ? 14 : 32); i++, --off)
- {
- OUT_MDIO((cmd >> off) & 0x00000001);
- udelay(us);
- OUT_MDC(1);
- udelay(us);
- OUT_MDC(0);
- }
-
- retval = cmd;
-
- if (read_op)
- {
- retval >>= 16;
-
- MAKE_MDIO_INPUT;
- udelay(us);
- OUT_MDC(1);
- udelay(us);
- OUT_MDC(0);
-
- for (i = 0; i < 16; i++)
- {
- udelay(us);
- OUT_MDC(1);
- udelay(us);
- retval <<= 1;
- if (IN_MDIO)
- retval++;
- OUT_MDC(0);
- }
- }
-
- MAKE_MDIO_INPUT;
- udelay(us);
- OUT_MDC(1);
- udelay(us);
- OUT_MDC(0);
-
- return retval;
-}
-#endif /* CONFIG_USE_MDIO */
-
-static void
-fcc_stop(struct net_device *dev)
-{
- struct fcc_enet_private *fep= (struct fcc_enet_private *)(dev->priv);
- volatile fcc_t *fccp = fep->fccp;
- fcc_info_t *fip = fep->fip;
- volatile fcc_enet_t *ep = fep->ep;
- volatile cpm_cpm2_t *cp = cpmp;
- volatile cbd_t *bdp;
- int i;
-
- if ((fccp->fcc_gfmr & (FCC_GFMR_ENR | FCC_GFMR_ENT)) == 0)
- return; /* already down */
-
- fccp->fcc_fccm = 0;
-
- /* issue the graceful stop tx command */
- while (cp->cp_cpcr & CPM_CR_FLG);
- cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
- 0x0c, CPM_CR_GRA_STOP_TX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* Disable transmit/receive */
- fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-
- /* issue the restart tx command */
- fccp->fcc_fcce = FCC_ENET_GRA;
- while (cp->cp_cpcr & CPM_CR_FLG);
- cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
- 0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* free tx buffers */
- fep->skb_cur = fep->skb_dirty = 0;
- for (i=0; i<=TX_RING_MOD_MASK; i++) {
- if (fep->tx_skbuff[i] != NULL) {
- dev_kfree_skb(fep->tx_skbuff[i]);
- fep->tx_skbuff[i] = NULL;
- }
- }
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
- fep->tx_free = TX_RING_SIZE;
- ep->fen_genfcc.fcc_tbptr = ep->fen_genfcc.fcc_tbase;
-
- /* Initialize the tx buffer descriptors. */
- bdp = fep->tx_bd_base;
- for (i=0; i<TX_RING_SIZE; i++) {
- bdp->cbd_sc = 0;
- bdp->cbd_datlen = 0;
- bdp->cbd_bufaddr = 0;
- bdp++;
- }
- /* Set the last buffer to wrap. */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-}
-
-static void
-fcc_restart(struct net_device *dev, int duplex)
-{
- struct fcc_enet_private *fep = (struct fcc_enet_private *)(dev->priv);
- volatile fcc_t *fccp = fep->fccp;
-
- /* stop any transmissions in progress */
- fcc_stop(dev);
-
- if (duplex)
- fccp->fcc_fpsmr |= FCC_PSMR_FDE | FCC_PSMR_LPB;
- else
- fccp->fcc_fpsmr &= ~(FCC_PSMR_FDE | FCC_PSMR_LPB);
-
- /* Enable interrupts for transmit error, complete frame
- * received, and any transmit buffer we have also set the
- * interrupt flag.
- */
- fccp->fcc_fccm = (FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
-
- /* Enable transmit/receive */
- fccp->fcc_gfmr |= FCC_GFMR_ENR | FCC_GFMR_ENT;
-}
-
-static int
-fcc_enet_open(struct net_device *dev)
-{
- struct fcc_enet_private *fep = dev->priv;
-
-#ifdef CONFIG_USE_MDIO
- fep->sequence_done = 0;
- fep->link = 0;
-
- if (fep->phy) {
- fcc_restart(dev, 0); /* always start in half-duplex */
- mii_do_cmd(dev, fep->phy->ack_int);
- mii_do_cmd(dev, fep->phy->config);
- mii_do_cmd(dev, phy_cmd_config); /* display configuration */
- while(!fep->sequence_done)
- schedule();
-
- mii_do_cmd(dev, fep->phy->startup);
- netif_start_queue(dev);
- return 0; /* Success */
- }
- return -ENODEV; /* No PHY we understand */
-#else
- fep->link = 1;
- fcc_restart(dev, 0); /* always start in half-duplex */
- netif_start_queue(dev);
- return 0; /* Always succeed */
-#endif /* CONFIG_USE_MDIO */
-}
-