aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/4xx/bamboo.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/4xx/bamboo.c')
-rw-r--r--arch/ppc/platforms/4xx/bamboo.c52
1 files changed, 44 insertions, 8 deletions
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index f116787b0b7..05e2824db71 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -123,33 +123,69 @@ bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
static void __init bamboo_set_emacdata(void)
{
- unsigned char * selection1_base;
+ u8 * base_addr;
struct ocp_def *def;
struct ocp_func_emac_data *emacdata;
- u8 selection1_val;
+ u8 val;
int mode;
+ u32 excluded = 0;
- selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
- selection1_val = readb(selection1_base);
- iounmap((void *) selection1_base);
- if (BAMBOO_SEL_MII(selection1_val))
+ base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
+ val = readb(base_addr);
+ iounmap((void *) base_addr);
+ if (BAMBOO_SEL_MII(val))
mode = PHY_MODE_MII;
- else if (BAMBOO_SEL_RMII(selection1_val))
+ else if (BAMBOO_SEL_RMII(val))
mode = PHY_MODE_RMII;
else
mode = PHY_MODE_SMII;
- /* Set mac_addr and phy mode for each EMAC */
+ /*
+ * SW2 on the Bamboo is used for ethernet configuration and is accessed
+ * via the CONFIG2 register in the FPGA. If the ANEG pin is set,
+ * overwrite the supported features with the settings in SW2.
+ *
+ * This is used as a workaround for the improperly biased RJ-45 sockets
+ * on the Rev. 0 Bamboo. By default only 10baseT is functional.
+ * Removing inductors L17 and L18 from the board allows 100baseT, but
+ * disables 10baseT. The Rev. 1 has no such limitations.
+ */
+
+ base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
+ val = readb(base_addr);
+ iounmap((void *) base_addr);
+ if (!BAMBOO_AUTONEGOTIATE(val)) {
+ excluded |= SUPPORTED_Autoneg;
+ if (BAMBOO_FORCE_100Mbps(val)) {
+ excluded |= SUPPORTED_10baseT_Full;
+ excluded |= SUPPORTED_10baseT_Half;
+ if (BAMBOO_FULL_DUPLEX_EN(val))
+ excluded |= SUPPORTED_100baseT_Half;
+ else
+ excluded |= SUPPORTED_100baseT_Full;
+ } else {
+ excluded |= SUPPORTED_100baseT_Full;
+ excluded |= SUPPORTED_100baseT_Half;
+ if (BAMBOO_FULL_DUPLEX_EN(val))
+ excluded |= SUPPORTED_10baseT_Half;
+ else
+ excluded |= SUPPORTED_10baseT_Full;
+ }
+ }
+
+ /* Set mac_addr, phy mode and unsupported phy features for each EMAC */
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
emacdata = def->additions;
memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
emacdata->phy_mode = mode;
+ emacdata->phy_feat_exc = excluded;
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
emacdata = def->additions;
memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
emacdata->phy_mode = mode;
+ emacdata->phy_feat_exc = excluded;
}
static int