aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/prpmc800.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/prpmc800.h')
-rw-r--r--arch/ppc/platforms/prpmc800.h82
1 files changed, 0 insertions, 82 deletions
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
deleted file mode 100644
index 26f604e05cf..00000000000
--- a/arch/ppc/platforms/prpmc800.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc800.h
- *
- * Definitions for Motorola PrPMC800 board support
- *
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- /*
- * From Processor to PCI:
- * PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
- * PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
- * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI to Processor:
- * System Memory: 0x00000000 -> 0x00000000
- */
-
-#ifndef __ASMPPC_PRPMC800_H
-#define __ASMPPC_PRPMC800_H
-
-#define PRPMC800_PCI_CONFIG_ADDR 0xfe000cf8
-#define PRPMC800_PCI_CONFIG_DATA 0xfe000cfc
-
-#define PRPMC800_PROC_PCI_IO_START 0xfe400000U
-#define PRPMC800_PROC_PCI_IO_END 0xfeefffffU
-#define PRPMC800_PCI_IO_START 0x00000000U
-#define PRPMC800_PCI_IO_END 0x00afffffU
-
-#define PRPMC800_PROC_PCI_MEM_START 0x80000000U
-#define PRPMC800_PROC_PCI_MEM_END 0x9fffffffU
-#define PRPMC800_PCI_MEM_START 0x80000000U
-#define PRPMC800_PCI_MEM_END 0x9fffffffU
-
-#define PRPMC800_NM_PROC_PCI_MEM_START 0x40000000U
-#define PRPMC800_NM_PROC_PCI_MEM_END 0xdfffffffU
-#define PRPMC800_NM_PCI_MEM_START 0x40000000U
-#define PRPMC800_NM_PCI_MEM_END 0xdfffffffU
-
-#define PRPMC800_PCI_DRAM_OFFSET 0x00000000U
-#define PRPMC800_PCI_PHY_MEM_OFFSET 0x00000000U
-
-#define PRPMC800_ISA_IO_BASE PRPMC800_PROC_PCI_IO_START
-#define PRPMC800_ISA_MEM_BASE 0x00000000U
-
-#define PRPMC800_HARRIER_XCSR_BASE HARRIER_DEFAULT_XCSR_BASE
-#define PRPMC800_HARRIER_MPIC_BASE 0xff000000
-
-#define PRPMC800_SERIAL_1 0xfeff00c0
-
-#define PRPMC800_BASE_BAUD 1843200
-
-/*
- * interrupt vector number and priority for harrier internal interrupt
- * sources
- */
-#define PRPMC800_INT_IRQ 16
-#define PRPMC800_INT_PRI 15
-
-/* UART Defines. */
-#define RS_TABLE_SIZE 4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* UARTS are at IRQ 16 */
-#define STD_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
- iomem_base: (unsigned char *)PRPMC800_SERIAL_1, \
- iomem_reg_shift: 0, \
- io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
- STD_SERIAL_PORT_DFNS
-
-#endif /* __ASMPPC_PRPMC800_H */