diff options
Diffstat (limited to 'arch/ppc64/kernel/pmac_pci.c')
| -rw-r--r-- | arch/ppc64/kernel/pmac_pci.c | 793 |
1 files changed, 0 insertions, 793 deletions
diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c deleted file mode 100644 index dc40a0cad0b..00000000000 --- a/arch/ppc64/kernel/pmac_pci.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * Support for PCI bridges found on Power Macintoshes. - * At present the "bandit" and "chaos" bridges are supported. - * Fortunately you access configuration space in the same - * way with either bridge. - * - * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) - * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/iommu.h> - -#include "pci.h" -#include "pmac.h" - -#define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* XXX Could be per-controller, but I don't think we risk anything by - * assuming we won't have both UniNorth and Bandit */ -static int has_uninorth; -static struct pci_controller *u3_agp; -struct device_node *k2_skiplist[2]; - -static int __init fixup_one_level_bus_range(struct device_node *node, int higher) -{ - for (; node != 0;node = node->sibling) { - int * bus_range; - unsigned int *class_code; - int len; - - /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range != NULL && len > 2 * sizeof(int)) { - if (bus_range[1] > higher) - higher = bus_range[1]; - } - higher = fixup_one_level_bus_range(node->child, higher); - } - return higher; -} - -/* This routine fixes the "bus-range" property of all bridges in the - * system since they tend to have their "last" member wrong on macs - * - * Note that the bus numbers manipulated here are OF bus numbers, they - * are not Linux bus numbers. - */ -static void __init fixup_bus_range(struct device_node *bridge) -{ - int * bus_range; - int len; - - /* Lookup the "bus-range" property for the hose */ - bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); - return; - } - bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); -} - -/* - * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. - * - * The "Bandit" version is present in all early PCI PowerMacs, - * and up to the first ones using Grackle. Some machines may - * have 2 bandit controllers (2 PCI busses). - * - * "Chaos" is used in some "Bandit"-type machines as a bridge - * for the separate display bus. It is accessed the same - * way as bandit, but cannot be probed for devices. It therefore - * has its own config access functions. - * - * The "UniNorth" version is present in all Core99 machines - * (iBook, G4, new IMacs, and all the recent Apple machines). - * It contains 3 controllers in one ASIC. - * - * The U3 is the bridge used on G5 machines. It contains on - * AGP bus which is dealt with the old UniNorth access routines - * and an HyperTransport bus which uses its own set of access - * functions. - */ - -#define MACRISC_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) - -#define MACRISC_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ - |1UL) - -static unsigned long __pmac macrisc_cfg_access(struct pci_controller* hose, - u8 bus, u8 dev_fn, u8 offset) -{ - unsigned int caddr; - - if (bus == hose->first_busno) { - if (dev_fn < (11 << 3)) - return 0; - caddr = MACRISC_CFA0(dev_fn, offset); - } else - caddr = MACRISC_CFA1(bus, dev_fn, offset); - - /* Uninorth will return garbage if we don't read back the value ! */ - do { - out_le32(hose->cfg_addr, caddr); - } while (in_le32(hose->cfg_addr) != caddr); - - offset &= has_uninorth ? 0x07 : 0x03; - return ((unsigned long)hose->cfg_data) + offset; -} - -static int __pmac macrisc_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int __pmac macrisc_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops macrisc_pci_ops = -{ - macrisc_read_config, - macrisc_write_config -}; - -/* - * These versions of U3 HyperTransport config space access ops do not - * implement self-view of the HT host yet - */ - -/* - * This function deals with some "special cases" devices. - * - * 0 -> No special case - * 1 -> Skip the device but act as if the access was successfull - * (return 0xff's on reads, eventually, cache config space - * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) - */ -static int u3_ht_skip_device(struct pci_controller *hose, - struct pci_bus *bus, unsigned int devfn) -{ - struct device_node *busdn, *dn; - int i; - - /* We only allow config cycles to devices that are in OF device-tree - * as we are apparently having some weird things going on with some - * revs of K2 on recent G5s - */ - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = hose->arch_data; - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn) - break; - if (dn == NULL) - return -1; - - /* - * When a device in K2 is powered down, we die on config - * cycle accesses. Fix that here. - */ - for (i=0; i<2; i++) - if (k2_skiplist[i] == dn) - return 1; - - return 0; -} - -#define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) -#define U3_HT_CFA1(bus, devfn, off) \ - (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ - + 0x01000000UL) - -static unsigned long __pmac u3_ht_cfg_access(struct pci_controller* hose, - u8 bus, u8 devfn, u8 offset) -{ - if (bus == hose->first_busno) { - /* For now, we don't self probe U3 HT bridge */ - if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); - } else - return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); -} - -static int __pmac u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (u3_ht_skip_device(hose, bus, devfn)) { - case 0: - break; - case 1: - switch (len) { - case 1: - *val = 0xff; break; - case 2: - *val = 0xffff; break; - default: - *val = 0xfffffffful; break; - } - return PCIBIOS_SUCCESSFUL; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int __pmac u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (u3_ht_skip_device(hose, bus, devfn)) { - case 0: - break; - case 1: - return PCIBIOS_SUCCESSFUL; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops u3_ht_pci_ops = -{ - u3_ht_read_config, - u3_ht_write_config -}; - -static void __init setup_u3_agp(struct pci_controller* hose) -{ - /* On G5, we move AGP up to high bus number so we don't need - * to reassign bus numbers for HT. If we ever have P2P bridges - * on AGP, we'll have to move pci_assign_all_busses to the - * pci_controller structure so we enable it for AGP and not for - * HT childs. - * We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->first_busno = 0xf0; - hose->last_busno = 0xff; - has_uninorth = 1; - hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); - hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - - u3_agp = hose; -} - -static void __init setup_u3_ht(struct pci_controller* hose) -{ - struct device_node *np = (struct device_node *)hose->arch_data; - int i, cur; - - hose->ops = &u3_ht_pci_ops; - - /* We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); - - /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read it's configuration register (if any). - */ - hose->io_base_phys = 0xf4000000; - hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); - isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt; - hose->io_resource.name = np->full_name; - hose->io_resource.start = 0; - hose->io_resource.end = 0x003fffff; - hose->io_resource.flags = IORESOURCE_IO; - hose->pci_mem_offset = 0; - hose->first_busno = 0; - hose->last_busno = 0xef; - hose->mem_resources[0].name = np->full_name; - hose->mem_resources[0].start = 0x80000000; - hose->mem_resources[0].end = 0xefffffff; - hose->mem_resources[0].flags = IORESOURCE_MEM; - - if (u3_agp == NULL) { - DBG("U3 has no AGP, using full resource range\n"); - return; - } - - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered - */ - cur = 0; - for (i=0; i<3; i++) { - struct resource *res = &u3_agp->mem_resources[i]; - if (res->flags != IORESOURCE_MEM) - continue; - /* We don't care about "fine" resources */ - if (res->start >= 0xf0000000) - continue; - /* Check if it's just a matter of "shrinking" us in one direction */ - if (hose->mem_resources[cur].start == res->start) { - DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); - hose->mem_resources[cur].start = res->end + 1; - continue; - } - if (hose->mem_resources[cur].end == res->end) { - DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - /* No, it's not the case, we need a hole */ - if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - cur++; - DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", - cur-1, res->start - 1, cur, res->end + 1); - hose->mem_resources[cur].name = np->full_name; - hose->mem_resources[cur].flags = IORESOURCE_MEM; - hose->mem_resources[cur].start = res->end + 1; - hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; - hose->mem_resources[cur-1].end = res->start - 1; - } -} - -static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary) -{ - static unsigned int static_lc_ranges[2024]; - unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; - unsigned int size; - int rlen = 0, orig_rlen; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - - np = na + 5; - - /* First we try to merge ranges to fix a problem with some pmacs - * that can have more than 3 ranges, fortunately using contiguous - * addresses -- BenH - */ - dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - if (!dt_ranges) - return; - /* lc_ranges = alloc_bootmem(rlen);*/ - lc_ranges = static_lc_ranges; - if (!lc_ranges) - return; /* what can we do here ? */ - memcpy(lc_ranges, dt_ranges, rlen); - orig_rlen = rlen; - - /* Let's work on a copy of the "ranges" property instead of damaging - * the device-tree image in memory - */ - ranges = lc_ranges; - prev = NULL; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if (prev) { - if (prev[0] == ranges[0] && prev[1] == ranges[1] && - (prev[2] + prev[na+4]) == ranges[2] && - (prev[na+2] + prev[na+4]) == ranges[na+2]) { - prev[na+4] += ranges[na+4]; - ranges[0] = 0; - ranges += np; - continue; - } - } - prev = ranges; - ranges += np; - } - - /* - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - ranges = lc_ranges; - rlen = orig_rlen; - while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - size = ranges[na+4]; - switch (ranges[0] >> 24) { - case 1: /* I/O space */ - if (ranges[2] != 0) - break; - hose->io_base_phys = ranges[na+2]; - /* limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; - hose->io_base_virt = ioremap(ranges[na+2], size); - if (primary) - isa_io_base = (unsigned long) hose->io_base_virt; - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = ranges[2]; - break; - case 2: /* memory space */ - memno = 0; - if (ranges[1] == 0 && ranges[2] == 0 - && ranges[na+4] <= (16 << 20)) { - /* 1st 16MB, i.e. ISA memory area */ -#if 0 - if (primary) - isa_mem_base = ranges[na+2]; -#endif - memno = 1; - } - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - if (memno == 0) - hose->pci_mem_offset = ranges[na+2] - ranges[2]; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - res->start = ranges[na+2]; - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - ranges += np; - } -} - -/* - * We assume that if we have a G3 powermac, we have one bridge called - * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, - * if we have one or more bandit or chaos bridges, we don't have a MPC106. - */ -static int __init add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - char* disp_name; - int *bus_range; - int primary = 1; - struct property *of_prop; - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose == NULL) - return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - - disp_name = NULL; - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose); - disp_name = "U3-HT"; - primary = 1; - } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pmac_process_bridge_OF_ranges(hose, dev, primary); - - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); - - return 0; -} - -/* - * We use our own read_irq_line here because PCI_INTERRUPT_PIN is - * crap on some of Apple ASICs. We unconditionally use the Open Firmware - * interrupt number as this is always right. - */ -static int pmac_pci_read_irq_line(struct pci_dev *pci_dev) -{ - struct device_node *node; - - node = pci_device_to_OF_node(pci_dev); - if (node == NULL) - return -1; - if (node->n_intrs == 0) - return -1; - pci_dev->irq = node->intrs[0].line; - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); - - return 0; -} - -void __init pmac_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pmac_pci_read_irq_line(dev); -} - -static void __init pmac_fixup_phb_resources(void) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; - hose->io_resource.start += offset; - hose->io_resource.end += offset; - printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", - hose->global_number, - hose->io_resource.start, hose->io_resource.end); - } -} - -void __init pmac_pci_init(void) -{ - struct device_node *np, *root; - struct device_node *ht = NULL; - - /* Probe root PCI hosts, that is on U3 the AGP host and the - * HyperTransport host. That one is actually "kept" around - * and actually added last as it's resource management relies - * on the AGP resources to have been setup first - */ - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); - return; - } - for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) - continue; - if (strcmp(np->name, "pci") == 0) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { - of_node_get(np); - ht = np; - } - } - of_node_put(root); - - /* Now setup the HyperTransport host if we found any - */ - if (ht && add_bridge(ht) != 0) - of_node_put(ht); - - /* Fixup the IO resources on our host bridges as the common code - * does it only for childs of the host bridges - */ - pmac_fixup_phb_resources(); - - /* Setup the linkage between OF nodes and PHBs */ - pci_devs_phb_init(); - - /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We - * assume there is no P2P bridge on the AGP bus, which should be a - * safe assumptions hopefully. - */ - if (u3_agp) { - struct device_node *np = u3_agp->arch_data; - PCI_DN(np)->busno = 0xf0; - for (np = np->child; np; np = np->sibling) - PCI_DN(np)->busno = 0xf0; - } - - pmac_check_ht_link(); - - /* Tell pci.c to not use the common resource allocation mecanism */ - pci_probe_only = 1; - - /* Allow all IO */ - io_page_mask = -1; -} - -/* - * Disable second function on K2-SATA, it's broken - * and disable IO BARs on first one - */ -static void fixup_k2_sata(struct pci_dev* dev) -{ - int i; - u16 cmd; - - if (PCI_FUNC(dev->devfn) > 0) { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 6; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } else { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~PCI_COMMAND_IO; - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 5; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); - |