diff options
Diffstat (limited to 'arch/sh/boards/board-ap325rxa.c')
| -rw-r--r-- | arch/sh/boards/board-ap325rxa.c | 205 |
1 files changed, 162 insertions, 43 deletions
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index fd1612590bf..1c67cba6e34 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -15,14 +15,17 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/smc911x.h> +#include <linux/gpio.h> #include <media/soc_camera_platform.h> #include <media/sh_mobile_ceu.h> -#include <asm/sh_mobile_lcdc.h> +#include <video/sh_mobile_lcdc.h> #include <asm/io.h> #include <asm/clock.h> +#include <cpu/sh7723.h> static struct smc911x_platdata smc911x_info = { .flags = SMC911X_USE_32BIT, @@ -52,20 +55,33 @@ static struct platform_device smc9118_device = { }, }; +/* + * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF). + * If this area erased, this board can not boot. + */ static struct mtd_partition ap325rxa_nor_flash_partitions[] = { { - .name = "uboot", - .offset = 0, - .size = (1 * 1024 * 1024), - .mask_flags = MTD_WRITEABLE, /* Read-only */ + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = (2 * 1024 * 1024), + .name = "free-area0", + .offset = MTDPART_OFS_APPEND, + .size = ((7 * 1024 * 1024) + (512 * 1024)), }, { - .name = "other", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, + .name = "CPLD-Data", + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, /* Read-only */ + .size = (1024 * 128 * 2), + }, { + .name = "free-area1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -93,20 +109,45 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +static struct mtd_partition nand_partition_info[] = { + { + .name = "nand_data", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct resource nand_flash_resources[] = { + [0] = { + .start = 0xa4530000, + .end = 0xa45300ff, + .flags = IORESOURCE_MEM, + } +}; + +static struct sh_flctl_platform_data nand_flash_data = { + .parts = nand_partition_info, + .nr_parts = ARRAY_SIZE(nand_partition_info), + .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E, + .has_hwecc = 1, +}; + +static struct platform_device nand_flash_device = { + .name = "sh_flctl", + .resource = nand_flash_resources, + .num_resources = ARRAY_SIZE(nand_flash_resources), + .dev = { + .platform_data = &nand_flash_data, + }, +}; + #define FPGA_LCDREG 0xB4100180 #define FPGA_BKLREG 0xB4100212 #define FPGA_LCDREG_VAL 0x0018 -#define PORT_PHCR 0xA405010E -#define PORT_PLCR 0xA4050114 -#define PORT_PMCR 0xA4050116 -#define PORT_PRCR 0xA405011C -#define PORT_PSCR 0xA405011E -#define PORT_PZCR 0xA405014C -#define PORT_HIZCRA 0xA4050158 #define PORT_MSELCRB 0xA4050182 -#define PORT_PSDR 0xA405013E -#define PORT_PZDR 0xA405016C -#define PORT_PSELD 0xA4050154 +#define PORT_HIZCRC 0xA405015C +#define PORT_DRVCRA 0xA405018A +#define PORT_DRVCRB 0xA405018C static void ap320_wvga_power_on(void *board_data) { @@ -116,8 +157,7 @@ static void ap320_wvga_power_on(void *board_data) ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); /* backlight */ - ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); - ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + gpio_set_value(GPIO_PTS3, 0); ctrl_outw(0x100, FPGA_BKLREG); } @@ -157,6 +197,10 @@ static struct resource lcdc_resources[] = { .end = 0xfe941fff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device lcdc_device = { @@ -263,6 +307,7 @@ static struct resource ceu_resources[] = { static struct platform_device ceu_device = { .name = "sh_mobile_ceu", + .id = 0, /* "ceu0" clock */ .num_resources = ARRAY_SIZE(ceu_resources), .resource = ceu_resources, .dev = { @@ -278,43 +323,117 @@ static struct platform_device *ap325rxa_devices[] __initdata = { #ifdef CONFIG_I2C &camera_device, #endif + &nand_flash_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, }; static int __init ap325rxa_devices_setup(void) { - clk_always_enable("mstp200"); /* LCDC */ - clk_always_enable("mstp203"); /* CEU */ + /* LD3 and LD4 LEDs */ + gpio_request(GPIO_PTX5, NULL); /* RUN */ + gpio_direction_output(GPIO_PTX5, 1); + gpio_export(GPIO_PTX5, 0); + + gpio_request(GPIO_PTX4, NULL); /* INDICATOR */ + gpio_direction_output(GPIO_PTX4, 0); + gpio_export(GPIO_PTX4, 0); + + /* SW1 input */ + gpio_request(GPIO_PTF7, NULL); /* MODE */ + gpio_direction_input(GPIO_PTF7); + gpio_export(GPIO_PTF7, 0); + + /* LCDC */ + gpio_request(GPIO_FN_LCDD15, NULL); + gpio_request(GPIO_FN_LCDD14, NULL); + gpio_request(GPIO_FN_LCDD13, NULL); + gpio_request(GPIO_FN_LCDD12, NULL); + gpio_request(GPIO_FN_LCDD11, NULL); + gpio_request(GPIO_FN_LCDD10, NULL); + gpio_request(GPIO_FN_LCDD9, NULL); + gpio_request(GPIO_FN_LCDD8, NULL); + gpio_request(GPIO_FN_LCDD7, NULL); + gpio_request(GPIO_FN_LCDD6, NULL); + gpio_request(GPIO_FN_LCDD5, NULL); + gpio_request(GPIO_FN_LCDD4, NULL); + gpio_request(GPIO_FN_LCDD3, NULL); + gpio_request(GPIO_FN_LCDD2, NULL); + gpio_request(GPIO_FN_LCDD1, NULL); + gpio_request(GPIO_FN_LCDD0, NULL); + gpio_request(GPIO_FN_LCDLCLK_PTR, NULL); + gpio_request(GPIO_FN_LCDDCK, NULL); + gpio_request(GPIO_FN_LCDVEPWC, NULL); + gpio_request(GPIO_FN_LCDVCPWC, NULL); + gpio_request(GPIO_FN_LCDVSYN, NULL); + gpio_request(GPIO_FN_LCDHSYN, NULL); + gpio_request(GPIO_FN_LCDDISP, NULL); + gpio_request(GPIO_FN_LCDDON, NULL); + + /* LCD backlight */ + gpio_request(GPIO_PTS3, NULL); + gpio_direction_output(GPIO_PTS3, 1); + + /* CEU */ + gpio_request(GPIO_FN_VIO_CLK2, NULL); + gpio_request(GPIO_FN_VIO_VD2, NULL); + gpio_request(GPIO_FN_VIO_HD2, NULL); + gpio_request(GPIO_FN_VIO_FLD, NULL); + gpio_request(GPIO_FN_VIO_CKO, NULL); + gpio_request(GPIO_FN_VIO_D15, NULL); + gpio_request(GPIO_FN_VIO_D14, NULL); + gpio_request(GPIO_FN_VIO_D13, NULL); + gpio_request(GPIO_FN_VIO_D12, NULL); + gpio_request(GPIO_FN_VIO_D11, NULL); + gpio_request(GPIO_FN_VIO_D10, NULL); + gpio_request(GPIO_FN_VIO_D9, NULL); + gpio_request(GPIO_FN_VIO_D8, NULL); + + gpio_request(GPIO_PTZ7, NULL); + gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */ + gpio_request(GPIO_PTZ6, NULL); + gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */ + gpio_request(GPIO_PTZ5, NULL); + gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */ + gpio_request(GPIO_PTZ4, NULL); + gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */ + + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + + /* FLCTL */ + gpio_request(GPIO_FN_FCE, NULL); + gpio_request(GPIO_FN_NAF7, NULL); + gpio_request(GPIO_FN_NAF6, NULL); + gpio_request(GPIO_FN_NAF5, NULL); + gpio_request(GPIO_FN_NAF4, NULL); + gpio_request(GPIO_FN_NAF3, NULL); + gpio_request(GPIO_FN_NAF2, NULL); + gpio_request(GPIO_FN_NAF1, NULL); + gpio_request(GPIO_FN_NAF0, NULL); + gpio_request(GPIO_FN_FCDE, NULL); + gpio_request(GPIO_FN_FOE, NULL); + gpio_request(GPIO_FN_FSC, NULL); + gpio_request(GPIO_FN_FWE, NULL); + gpio_request(GPIO_FN_FRB, NULL); + + ctrl_outw(0, PORT_HIZCRC); + ctrl_outw(0xFFFF, PORT_DRVCRA); + ctrl_outw(0xFFFF, PORT_DRVCRB); platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); - + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } device_initcall(ap325rxa_devices_setup); -static void __init ap325rxa_setup(char **cmdline_p) -{ - /* LCDC configuration */ - ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); - ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); - ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); - ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); - ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); - - /* CEU */ - ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); - ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); - ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); - ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); -} - static struct sh_machine_vector mv_ap325rxa __initmv = { .mv_name = "AP-325RXA", - .mv_setup = ap325rxa_setup, }; |