diff options
Diffstat (limited to 'arch/sh/boards/se/7751')
| -rw-r--r-- | arch/sh/boards/se/7751/Makefile | 4 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/io.c | 171 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/irq.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/led.c | 18 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/mach.c | 54 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/setup.c | 109 |
6 files changed, 75 insertions, 283 deletions
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index ce7ca247f84..188900c4832 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -2,7 +2,7 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o +obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o - +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c index 99041b26926..e8d846cec89 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/se/7751/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,96 +8,21 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/pci.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> #include <asm/addrspace.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - -#if 0 -/****************************************************************** - * Variables from io_se.c, related to PCMCIA (not PCI); we're not - * compiling them in, and have removed references from functions - * which follow. [Many checked for IO ports in the range bounded - * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. - * As start/stop are uninitialized, only port 0x0 would match?] - * When used, remember to adjust names to avoid clash with io_se? - *****************************************************************/ -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; -/*************************************************************/ -#endif - -/* - * The 7751 Solution Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -static inline volatile __u16 * -port2adr(unsigned int port) +static inline volatile u16 *port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#if 0 - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } -#if 0 -/* The 7751 Solution Engine seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -111,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char sh7751se_inb_p(unsigned long port) @@ -123,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port)) & 0xff; + ctrl_delay(); return v; } @@ -135,12 +58,12 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -148,12 +71,12 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -162,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -172,73 +95,41 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void sh7751se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index bf6c023615d..c607b0a4847 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/irq.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c index a878726d3c7..ff0355dea81 100644 --- a/arch/sh/boards/se/7751/led.c +++ b/arch/sh/boards/se/7751/led.c @@ -8,23 +8,8 @@ * * This file contains Solution Engine specific LED code. */ - -#include <asm/se7751/se7751.h> - -static void mach_led(int position, int value) -{ - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - - if (value) { - *p |= (1<<8); - } else { - *p &= ~(1<<8); - } -} - -#ifdef CONFIG_HEARTBEAT - #include <linux/sched.h> +#include <asm/se7751.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ void heartbeat_7751se(void) @@ -64,4 +49,3 @@ void heartbeat_7751se(void) *p = 1<<(bit+8); } -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c deleted file mode 100644 index 62d8d3e6259..00000000000 --- a/arch/sh/boards/se/7751/mach.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_7751se.c - * - * Minor tweak of mach_se.c file to reference 7751se-specific items. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Hitachi 7751 SolutionEngine - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/se7751/io.h> - -void heartbeat_7751se(void); -void init_7751se_IRQ(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_7751se __initmv = { - .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - - .mv_isa_port2addr = sh7751se_isa_port2addr, - - .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif -}; -ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 48dc5aee67d..73e826310ba 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -1,4 +1,4 @@ -/* +/* * linux/arch/sh/kernel/setup_7751se.c * * Copyright (C) 2000 Kazumoto Kojima @@ -11,78 +11,15 @@ #include <linux/init.h> #include <linux/irq.h> - -#include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -#endif - -/* - * Configure the Super I/O chip - */ -#if 0 -/* Leftover code from regular Solution Engine, for reference. */ -/* The SH7751 Solution Engine has a different SuperIO. */ -static void __init smsc_config(int index, int data) -{ - outb_p(index, INDEX_PORT); - outb_p(data, DATA_PORT); -} - -static void __init init_smsc(void) -{ - outb_p(CONFIG_ENTER, CONFIG_PORT); - outb_p(CONFIG_ENTER, CONFIG_PORT); - - /* FDC */ - smsc_config(CURRENT_LDN_INDEX, LDN_FDC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - - /* AUXIO (GPIO): to use IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); - smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ - smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ - - /* COM1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x03); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ - - /* COM2 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM2); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x02); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ - - /* RTC */ - smsc_config(CURRENT_LDN_INDEX, LDN_RTC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ - - /* XXX: PARPORT, KBD, and MOUSE will come here... */ - outb_p(CONFIG_EXIT, CONFIG_PORT); -} -#endif - -const char *get_system_type(void) -{ - return "7751 SolutionEngine"; -} +void heartbeat_7751se(void); +void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> static int kgdb_uart_setup(void); static struct kgdb_sermap kgdb_uart_sermap = { "ttyS", 0, kgdb_uart_setup, NULL }; @@ -91,7 +28,7 @@ static struct kgdb_sermap kgdb_uart_sermap = /* * Initialize the board */ -void __init platform_setup(void) +static void __init sh7751se_setup(char **cmdline_p) { /* Call init_smsc() replacement to set up SuperIO. */ /* XXX: RTC setting comes here */ @@ -225,3 +162,37 @@ static int kgdb_uart_setup(void) return 0; } #endif /* CONFIG_SH_KGDB */ + + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7751se __initmv = { + .mv_name = "7751 SolutionEngine", + .mv_setup = sh7751se_setup, + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_init_irq = init_7751se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7751se, +#endif +}; +ALIAS_MV(7751se) |