aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/Kconfig22
-rw-r--r--arch/sh/boards/board-ap325rxa.c10
-rw-r--r--arch/sh/boards/board-sh7785lcr.c18
-rw-r--r--arch/sh/boards/mach-ecovec24/Makefile9
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c670
-rw-r--r--arch/sh/boards/mach-highlander/setup.c7
-rw-r--r--arch/sh/boards/mach-kfr2r09/Makefile2
-rw-r--r--arch/sh/boards/mach-kfr2r09/lcd_wqvga.c332
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c386
-rw-r--r--arch/sh/boards/mach-migor/setup.c11
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c4
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c110
-rw-r--r--arch/sh/boards/mach-x3proto/setup.c7
13 files changed, 1572 insertions, 16 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2b1af0eefa6..aedd9deb5de 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -160,7 +160,6 @@ config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
- select IO_TRAPPED if MMU
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
@@ -171,6 +170,13 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
+config SH_SH7785LCR_PT
+ bool "SH7785LCR prototype board on 32-bit MMU mode"
+ depends on SH_SH7785LCR && 32BIT
+ default n
+ help
+ If you use prototype board, this option is enabled.
+
config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
@@ -193,6 +199,20 @@ config SH_AP325RXA
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+config SH_KFR2R09
+ bool "KFR2R09"
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+ bool "EcoVec"
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
config SH_SH7763RDP
bool "SH7763RDP"
depends on CPU_SUBTYPE_SH7763
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index b9c88cc519e..327d47c25a5 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -188,7 +188,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.name = "LB070WV1",
.xres = 800,
.yres = 480,
- .left_margin = 40,
+ .left_margin = 32,
.right_margin = 160,
.hsync_len = 8,
.upper_margin = 63,
@@ -211,7 +211,7 @@ static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000, /* P4-only space */
- .end = 0xfe941fff,
+ .end = 0xfe942fff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -227,6 +227,9 @@ static struct platform_device lcdc_device = {
.dev = {
.platform_data = &lcdc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
};
static void camera_power(int val)
@@ -377,6 +380,9 @@ static struct platform_device ceu_device = {
.dev = {
.platform_data = &sh_mobile_ceu_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU,
+ },
};
struct spi_gpio_platform_data sdcard_cn3_platform_data = {
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 42410a15d25..e5a8a2fde39 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -223,6 +223,19 @@ static struct platform_device sm501_device = {
.resource = sm501_resources,
};
+static struct resource i2c_proto_resources[] = {
+ [0] = {
+ .start = PCA9564_PROTO_32BIT_ADDR,
+ .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ [1] = {
+ .start = 12,
+ .end = 12,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct resource i2c_resources[] = {
[0] = {
.start = PCA9564_ADDR,
@@ -271,6 +284,11 @@ static int __init sh7785lcr_devices_setup(void)
i2c_register_board_info(0, sh7785lcr_i2c_devices,
ARRAY_SIZE(sh7785lcr_i2c_devices));
+ if (mach_is_sh7785lcr_pt()) {
+ i2c_device.resource = i2c_proto_resources;
+ i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+ }
+
return platform_add_devices(sh7785lcr_devices,
ARRAY_SIZE(sh7785lcr_devices));
}
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 00000000000..51f85215165
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y := setup.o \ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 00000000000..96bc1698310
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,670 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/sh_keysc.h>
+#include <asm/clock.h>
+#include <cpu/sh7724.h>
+
+/*
+ * Address Interface BusWidth
+ *-----------------------------------------
+ * 0x0000_0000 uboot 16bit
+ * 0x0004_0000 Linux romImage 16bit
+ * 0x0014_0000 MTD for Linux 16bit
+ * 0x0400_0000 Internal I/O 16/32bit
+ * 0x0800_0000 DRAM 32bit
+ * 0x1800_0000 MFI 16bit
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+static struct heartbeat_data heartbeat_data = {
+ .regsize = 8,
+ .nr_bits = 4,
+ .bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = 0xA405012C, /* PTG */
+ .end = 0xA405012E - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "boot loader",
+ .offset = 0,
+ .size = (5 * 1024 * 1024),
+ .mask_flags = MTD_CAP_ROM,
+ }, {
+ .name = "free-area",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR (0xA4600000)
+#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
+static struct resource sh_eth_resources[] = {
+ [0] = {
+ .start = SH_ETH_ADDR,
+ .end = SH_ETH_ADDR + 0x1FC,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 91,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+ .phy = 0x1f, /* SMSC LAN8700 */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_eth_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .resource = sh_eth_resources,
+};
+
+/* USB0 host */
+void usb0_port_power(int port, int power)
+{
+ gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+ .on_chip = 1,
+ .port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+ [0] = {
+ .start = 0xa4d80000,
+ .end = 0xa4d80124 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device usb0_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb0_host_data,
+ },
+ .num_resources = ARRAY_SIZE(usb0_host_resources),
+ .resource = usb0_host_resources,
+};
+
+/*
+ * USB1
+ *
+ * CN5 can use both host/function,
+ * and we can determine it by checking PTB[3]
+ *
+ * This time only USB1 host is supported.
+ */
+void usb1_port_power(int port, int power)
+{
+ if (!gpio_get_value(GPIO_PTB3)) {
+ printk(KERN_ERR "USB1 function is not supported\n");
+ return;
+ }
+
+ gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+ .on_chip = 1,
+ .port_power = usb1_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90124 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device usb1_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb1_host_data,
+ },
+ .num_resources = ARRAY_SIZE(usb1_host_resources),
+ .resource = usb1_host_resources,
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .ch[0] = {
+ .interface_type = RGB18,
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .lcd_cfg = {
+ .sync = 0, /* hsync and vsync are active low */
+ },
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
+ .board_cfg = {
+ },
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000,
+ .end = 0xfe942fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 106,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+ [0] = {
+ .name = "CEU0",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu0_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(ceu0_resources),
+ .resource = ceu0_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu0_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+ [0] = {
+ .name = "CEU1",
+ .start = 0xfe914000,
+ .end = 0xfe91409f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 63,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu1_device = {
+ .name = "sh_mobile_ceu",
+ .id = 1, /* "ceu1" clock */
+ .num_resources = ARRAY_SIZE(ceu1_resources),
+ .resource = ceu1_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu1_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_CEU1,
+ },
+};
+
+/* I2C device */
+static struct i2c_board_info i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("r2025sd", 0x32),
+ },
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+ .mode = SH_KEYSC_MODE_1,
+ .scan_timing = 3,
+ .delay = 50,
+ .kycr2_delay = 100,
+ .keycodes = { KEY_1, 0, 0, 0, 0,
+ KEY_2, 0, 0, 0, 0,
+ KEY_3, 0, 0, 0, 0,
+ KEY_4, 0, 0, 0, 0,
+ KEY_5, 0, 0, 0, 0,
+ KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0x044b0000,
+ .end = 0x044b000f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 79,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* keysc0 clock */
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+ &heartbeat_device,
+ &nor_flash_device,
+ &sh_eth_device,
+ &usb0_host_device,
+ &usb1_host_device, /* USB1 host support */
+ &lcdc_device,
+ &ceu0_device,
+ &ceu1_device,
+ &keysc_device,
+};
+
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+ struct i2c_msg msg[2];
+ u8 buf;
+ int ret;
+
+ msg[0].addr = EEPROM_ADDR;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = &command;
+
+ msg[1].addr = EEPROM_ADDR;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 1;
+ msg[1].buf = &buf;
+
+ ret = i2c_transfer(a, msg, 2);
+ if (ret < 0) {
+ printk(KERN_ERR "error %d\n", ret);
+ buf = 0xff;
+ }
+
+ return buf;
+}
+
+#define MAC_LEN 6
+static void __init sh_eth_init(void)
+{
+ struct i2c_adapter *a = i2c_get_adapter(1);
+ struct clk *eth_clk;
+ u8 mac[MAC_LEN];
+ int i;
+
+ if (!a) {
+ pr_err("can not get I2C 1\n");
+ return;
+ }
+
+ eth_clk = clk_get(NULL, "eth0");
+ if (!eth_clk) {
+ pr_err("can not get eth0 clk\n");
+ return;
+ }
+
+ /* read MAC address frome EEPROM */
+ for (i = 0; i < MAC_LEN; i++) {
+ mac[i] = mac_read(a, 0x10 + i);
+ msleep(10);
+ }
+
+ /* clock enable */
+ clk_enable(eth_clk);
+
+ /* reset sh-eth */
+ ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+ /* set MAC addr */
+ ctrl_outl((mac[0] << 24) |
+ (mac[1] << 16) |
+ (mac[2] << 8) |
+ (mac[3] << 0), SH_ETH_MAHR);
+ ctrl_outl((mac[4] << 8) |
+ (mac[5] << 0), SH_ETH_MALR);
+
+ clk_put(eth_clk);
+}
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA 0xA405018A
+static int __init arch_setup(void)
+{
+ /* enable SCIFA0 */
+ gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+ gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+ /* enable debug LED */
+ gpio_request(GPIO_PTG0, NULL);
+ gpio_request(GPIO_PTG1, NULL);
+ gpio_request(GPIO_PTG2, NULL);
+ gpio_request(GPIO_PTG3, NULL);
+ gpio_direction_output(GPIO_PTG0, 0);
+ gpio_direction_output(GPIO_PTG1, 0);
+ gpio_direction_output(GPIO_PTG2, 0);
+ gpio_direction_output(GPIO_PTG3, 0);
+ ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+ /* enable SH-Eth */
+ gpio_request(GPIO_PTA1, NULL);
+ gpio_direction_output(GPIO_PTA1, 1);
+ mdelay(20);
+
+ gpio_request(GPIO_FN_RMII_RXD0, NULL);
+ gpio_request(GPIO_FN_RMII_RXD1, NULL);
+ gpio_request(GPIO_FN_RMII_TXD0, NULL);
+ gpio_request(GPIO_FN_RMII_TXD1, NULL);
+ gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+ gpio_request(GPIO_FN_RMII_TX_EN, NULL);
+ gpio_request(GPIO_FN_RMII_RX_ER, NULL);
+ gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
+ gpio_request(GPIO_FN_MDIO, NULL);
+ gpio_request(GPIO_FN_MDC, NULL);
+ gpio_request(GPIO_FN_LNKSTA, NULL);
+
+ /* enable USB */
+ ctrl_outw(0x0000, 0xA4D80000);
+ ctrl_outw(0x0000, 0xA4D90000);
+ gpio_request(GPIO_PTB3, NULL);
+ gpio_request(GPIO_PTB4, NULL);
+ gpio_request(GPIO_PTB5, NULL);
+ gpio_direction_input(GPIO_PTB3);
+ gpio_direction_output(GPIO_PTB4, 0);
+ gpio_direction_output(GPIO_PTB5, 0);
+ ctrl_outw(0x0600, 0xa40501d4);
+ ctrl_outw(0x0600, 0xa4050192);
+
+ /* enable LCDC */
+ gpio_request(GPIO_FN_LCDD23, NULL);
+ gpio_request(GPIO_FN_LCDD22, NULL);
+ gpio_request(GPIO_FN_LCDD21, NULL);
+ gpio_request(GPIO_FN_LCDD20, NULL);
+ gpio_request(GPIO_FN_LCDD19, NULL);
+ gpio_request(GPIO_FN_LCDD18, NULL);
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDHSYN, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+ gpio_request(GPIO_FN_LCDVSYN, NULL);
+ gpio_request(GPIO_FN_LCDDON, NULL);
+ gpio_request(GPIO_FN_LCDLCLK, NULL);
+ ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+ gpio_request(GPIO_PTE6, NULL);
+ gpio_request(GPIO_PTU1, NULL);
+ gpio_request(GPIO_PTR1, NULL);
+ gpio_request(GPIO_PTA2, NULL);
+ gpio_direction_input(GPIO_PTE6);
+ gpio_direction_output(GPIO_PTU1, 0);
+ gpio_direction_output(GPIO_PTR1, 0);
+ gpio_direction_output(GPIO_PTA2, 0);
+
+ /* I/O buffer drive ability is low */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
+ if (gpio_get_value(GPIO_PTE6)) {
+ /* DVI */
+ lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
+ lcdc_info.ch[0].clock_divider = 1,
+ lcdc_info.ch[0].lcd_cfg.name = "DVI";
+ lcdc_info.ch[0].lcd_cfg.xres = 1280;
+ lcdc_info.ch[0].lcd_cfg.yres = 720;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+
+ gpio_set_value(GPIO_PTA2, 1);
+ gpio_set_value(GPIO_PTU1, 1);
+ } else {
+ /* Panel */
+
+ lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
+ lcdc_info.ch[0].clock_divider = 2,
+ lcdc_info.ch[0].lcd_cfg.name = "Panel";
+ lcdc_info.ch[0].lcd_cfg.xres = 800;
+ lcdc_info.ch[0].lcd_cfg.yres = 480;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+
+ gpio_set_value(GPIO_PTR1, 1);
+
+ /* FIXME
+ *
+ * LCDDON control is needed for Panel,
+ * but current sh_mobile_lcdc driver doesn't control it.
+ * It is temporary correspondence
+ */
+ gpio_request(GPIO_PTF4, NULL);
+ gpio_direction_output(GPIO_PTF4, 1);
+ }
+
+ /* enable CEU0 */
+ gpio_request(GPIO_FN_VIO0_D15, NULL);
+ gpio_request(GPIO_FN_VIO0_D14, NULL);
+ gpio_request(GPIO_FN_VIO0_D13, NULL);
+ gpio_request(GPIO_FN_VIO0_D12, NULL);
+ gpio_request(GPIO_FN_VIO0_D11, NULL);
+ gpio_request(GPIO_FN_VIO0_D10, NULL);
+ gpio_request(GPIO_FN_VIO0_D9, NULL);
+ gpio_request(GPIO_FN_VIO0_D8, NULL);
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_FLD, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+ /* enable CEU1 */
+ gpio_request(GPIO_FN_VIO1_D7, NULL);
+ gpio_request(GPIO_FN_VIO1_D6, NULL);
+ gpio_request(GPIO_FN_VIO1_D5, NULL);
+ gpio_request(GPIO_FN_VIO1_D4, NULL);
+ gpio_request(GPIO_FN_VIO1_D3, NULL);
+ gpio_request(GPIO_FN_VIO1_D2, NULL);
+ gpio_request(GPIO_FN_VIO1_D1, NULL);
+ gpio_request(GPIO_FN_VIO1_D0, NULL);
+ gpio_request(GPIO_FN_VIO1_FLD, NULL);
+ gpio_request(GPIO_FN_VIO1_HD, NULL);
+ gpio_request(GPIO_FN_VIO1_VD, NULL);
+ gpio_request(GPIO_FN_VIO1_CLK, NULL);
+ platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+ /* enable KEYSC */
+ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+ gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYIN0, NULL);
+
+ /* enable user debug switch */
+ gpio_request(GPIO_PTR0, NULL);
+ gpio_request(GPIO_PTR4, NULL);
+ gpio_request(GPIO_PTR5, NULL);
+ gpio_request(GPIO_PTR6, NULL);
+ gpio_direction_input(GPIO_PTR0);
+ gpio_direction_input(GPIO_PTR4);
+ gpio_direction_input(GPIO_PTR5);
+ gpio_direction_input(GPIO_PTR6);
+
+ /* enable I2C device */
+ i2c_register_board_info(1, i2c1_devices,
+ ARRAY_SIZE(i2c1_devices));
+
+ return platform_add_devices(ecovec_devices,
+ ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+ sh_eth_init();
+ return 0;
+}
+device_initcall(devices_setup);
+
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+ .mv_name = "R0P7724 (EcoVec)",
+};
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 1639f891500..566e69d8d72 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
#include <net/ax88796.h>
#include <asm/machvec.h>
#include <mach/highlander.h>
@@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = {
.resource = r8a66597_usb_host_resources,
};
+static struct m66592_platdata usbf_platdata = {
+ .xtal = M66592_PLATDATA_XTAL_24MHZ,
+ .vif = 1,
+};
+
static struct resource m66592_usb_peripheral_resources[] = {
[0] = {
.name = "m66592_udc",
@@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = {
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbf_platdata,
},
.num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
.resource = m66592_usb_peripheral_resources,
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 00000000000..5d5867826e3
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1,2 @@
+obj-y := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 00000000000..8ccb1cc8b58
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,332 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+ 0x02, /* WEMODE: 1=cont, 0=one-shot */
+ 0x00, 0x00,
+ 0x00, /* EPF, DFM */
+ 0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+ 0x0b,
+ 0x63, /* 400 lines */
+ 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+ 0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+ 0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+ 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
+ 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+ 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so,
+ int i, unsigned long v)
+{
+ if (i)
+ so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+ else
+ so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so,
+ unsigned char const *data, int no_data)
+{
+ int i;
+
+ for (i = 0; i < no_data; i++)
+ write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ unsigned long device_code;
+
+ /* access protect OFF */
+ write_reg(sohandle, so, 0, 0xb0);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* deep standby OFF */
+ write_reg(sohandle, so, 0, 0xb1);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* device code command */
+ write_reg(sohandle, so, 0, 0xbf);
+ mdelay(50);
+
+ /* dummy read */
+ read_reg(sohandle, so);
+
+ /* read device code */
+ device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+ device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+ device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+ device_code |= (read_reg(sohandle, so) & 0xff);
+
+ return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ int i;
+
+ /* write start */
+ write_memory_start(sohandle, so);
+
+ /* paint it black */
+ for (i = 0; i < (240 * 400); i++)
+ write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ /* access protect off */
+ write_reg(sohandle, so, 0, 0xb0);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* exit deep standby mode */
+ write_reg(sohandle, so, 0, 0xb1);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* frame memory I/F */
+ write_reg(sohandle, so, 0, 0xb3);
+ write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+ /* display mode and frame memory write mode */
+ write_reg(sohandle, so, 0, 0xb4);
+ write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+ /* panel */
+ write_reg(sohandle, so, 0, 0xc0);
+ write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+ /* timing (normal) */
+ write_reg(sohandle, so, 0, 0xc1);
+ write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+ /* timing (partial) */
+ write_reg(sohandle, so, 0, 0xc2);
+ write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+ /* timing (idle) */
+ write_reg(sohandle, so, 0, 0xc3);
+ write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+ /* timing (source/VCOM/gate driving) */
+ write_reg(sohandle, so, 0, 0xc4);
+ write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+ /* gamma (red) */
+ write_reg(sohandle, so, 0, 0xc8);
+ write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+ /* gamma (green) */
+ write_reg(sohandle, so, 0, 0xc9);
+ write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+ /* gamma (blue) */
+ write_reg(sohandle, so, 0, 0xca);
+ write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+ /* power (common) */
+ write_reg(sohandle, so, 0, 0xd0);
+ write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+ /* VCOM */
+ write_reg(sohandle, so, 0, 0xd1);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x0f);
+ write_reg(sohandle, so, 1, 0x02);
+
+ /* power (normal) */
+ write_reg(sohandle, so, 0, 0xd2);
+ write_reg(sohandle, so, 1, 0x63);
+ write_reg(sohandle, so, 1, 0x24);
+
+ /* power (partial) */
+ write_reg(sohandle, so, 0, 0xd3);
+ write_reg(sohandle, so, 1, 0x63);
+ write_reg(sohandle, so, 1, 0x24);
+
+ /* power (idle) */
+ write_reg(sohandle, so, 0, 0xd4);
+ write_reg(sohandle, so, 1, 0x63);
+ write_reg(sohandle, so, 1, 0x24);
+
+ write_reg(sohandle, so, 0, 0xd8);
+ write_reg(sohandle, so, 1, 0x77);
+ write_reg(sohandle, so, 1, 0x77);
+
+ /* TE signal */
+ write_reg(sohandle, so, 0, 0x35);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* TE signal line */
+ write_reg(sohandle, so, 0, 0x44);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x00);
+
+ /* column address */
+ write_reg(sohandle, so, 0, 0x2a);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0xef);
+
+ /* page address */
+ write_reg(sohandle, so, 0, 0x2b);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x00);
+ write_reg(sohandle, so, 1, 0x01);
+ write_reg(sohandle, so, 1, 0x8f);
+
+ /* exit sleep mode */
+ write_reg(sohandle, so, 0, 0x11);
+
+ mdelay(120);
+
+ /* clear vram */
+ clear_memory(sohandle, so);
+
+ /* display ON */
+ write_reg(sohandle, so, 0, 0x29);
+ mdelay(1);
+
+ write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+ struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ /* power on */
+ gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
+ gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
+ gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
+ udelay(1100);
+ gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
+ udelay(10);
+ gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
+ mdelay(20);
+
+ if (read_device_code(sohandle, so) != 0x01221517)
+ return -ENODEV;
+
+ pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+ display_on(sohandle, so);
+ return 0;
+}
+
+#define CTRL_CKSW 0x10
+#define CTRL_C10 0x20
+#define CTRL_CPSW 0x80
+#define MAIN_MLED4 0x40
+#define MAIN_MSW 0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+ struct i2c_adapter *a;
+ struct i2c_msg msg;
+ unsigned char buf[2];
+ int ret;
+
+ a = i2c_get_adapter(0);
+ if (!a)
+ return -ENODEV;
+
+ buf[0] = 0x00;
+ if (on)
+ buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+ else
+ buf[1] = 0;
+
+ msg.addr = 0x75;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[0] = 0x01;
+ if (on)
+ buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+ else
+ buf[1] = 0;
+
+ msg.addr = 0x75;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+ kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+ kfr2r09_lcd_backlight(0);
+}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 00000000000..c08d33fe210
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,386 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/usb/r8a66597.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = (4 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ },
+ {
+ .name = "other",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+ .width = 2,
+ .parts = kfr2r09_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = kfr2r09_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
+ .dev = {
+ .platform_data = &kfr2r09_nor_flash_data,
+ },
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+ [0] = {
+ .name = "NAND Flash",
+ .start = 0x10000000,
+ .end = 0x1001ffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+ .name = "onenand-flash",
+ .resource = kfr2r09_nand_flash_resources,
+ .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+ .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+ .scan_timing = 3,
+ .delay = 10,
+ .keycodes = {
+ KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+ KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+ KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+ KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+ KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+ 0, 0, 0, 0, 0
+ },
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0x044b0000,
+ .end = 0x044b000f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 79,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
+ .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+ .resource = kfr2r09_sh_keysc_resources,
+ .dev = {
+ .platform_data = &kfr2r09_sh_keysc_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = SYS18,
+ .clock_divider = 6,
+ .flags = LCDC_FLAGS_DWPOL,
+ .lcd_cfg = {
+ .name = "TX07D34VM0AAA",
+ .xres = 240,
+ .yres = 400,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 0,
+ .lower_margin = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ },
+ .lcd_size_cfg = {
+ .width = 35,
+ .height = 58,
+ },
+ .board_cfg = {
+ .setup_sys = kfr2r09_lcd_setup,
+ .display_on = kfr2r09_lcd_on,
+ .display_off = kfr2r09_lcd_off,
+ },
+ .sys_bus_cfg = {
+ .ldmt2r = 0x07010904,
+ .ldmt3r = 0x14012914,
+ /* set 1s delay to encourage fsync() */
+ .deferred_io_msec = 1000,
+ },
+ }
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe942fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 106,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+ .resource = kfr2r09_sh_lcdc_resources,
+ .dev = {
+ .platform_data = &kfr2r09_sh_lcdc_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
+};
+
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+ .on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+ [0] = {
+ .start = 0x04d80000,
+ .end = 0x04d80123,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+ .name = "r8a66597_udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &kfr2r09_usb0_gadget_data,
+ },
+ .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+ .resource = kfr2r09_usb0_gadget_resources,
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+ &kfr2r09_nor_flash_device,
+ &kfr2r09_nand_flash_device,
+ &kfr2r09_sh_keysc_device,
+ &kfr2r09_sh_lcdc_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+#ifdef CONFIG_I2C
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+ struct i2c_adapter *a;
+ struct i2c_msg msg;
+ unsigned char buf[2];
+ int ret;
+
+ a = i2c_get_adapter(0);
+ if (!a)
+ return -ENODEV;
+
+ /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[0] = 0;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = I2C_M_RD;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[1] = buf[0] | (1 << 1);
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ return 0;
+}
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+ return -ENODEV;
+}
+#endif
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+ int plugged_in;
+
+ gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+ gpio_direction_input(GPIO_PTN4);
+ plugged_in = gpio_get_value(GPIO_PTN4);
+ if (!plugged_in)
+ return -ENODEV; /* no cable plugged in */
+
+ if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+ return -ENODEV; /* unable to configure using i2c */
+
+ ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+ gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+ gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+ msleep(20); /* wait 20ms to let the clock settle */
+ clk_enable(clk_get(NULL, "usb0"));
+ ctrl_outw(0x0600, 0xa40501d4);
+
+ return 0;
+}
+
+static int __init kfr2r09_devices_setup(void)
+{
+ /* enable SCIF1 serial port for YC401 console support */
+ gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+ gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+ /* setup NOR flash at CS0 */
+ ctrl_outl(0x36db0400, BSC_CS0BCR);
+ ctrl_outl(0x00000500, BSC_CS0WCR);
+
+ /* setup NAND flash at CS4 */
+ ctrl_outl(0x36db0400, BSC_CS4BCR);
+ ctrl_outl(0x00000500, BSC_CS4WCR);
+
+ /* setup KEYSC pins */
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+ gpio_request(GPIO_FN_KEYIN0, NULL);
+ gpio_request(GPIO_FN_KEYIN1, NULL);
+ gpio_request(GPIO_FN_KEYIN2, NULL);
+ gpio_request(GPIO_FN_KEYIN3, NULL);
+ gpio_request(GPIO_FN_KEYIN4, NULL);
+ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+ /* setup LCDC pins for SYS panel */
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+ gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+ gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+ gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+ gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+ gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+ gpio_direction_output(GPIO_PTE4, 1);
+ gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+ gpio_direction_output(GPIO_PTF4, 1);
+ gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+ gpio_direction_output(GPIO_PTU0, 1);
+
+ /* setup USB function */
+ if (kfr2r09_usb0_gadget_setup() == 0)
+ platform_device_register(&kfr2r09_usb0_gadget_device);
+
+ return platform_add_devices(kfr2r09_devices,
+ ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+ /* MD0=1, MD1=1, MD2=0: Clock Mode 3
+ * MD3=0: 16-bit Area0 Bus Width
+ * MD5=1: Little Endian
+ * MD8=1: Test Mode Disabled
+ */
+ return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+ .mv_name = "kfr2r09",
+ .mv_mode_pins = kfr2r09_mode_pins,
+};
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f9b2e4df35b..6ed1fd32369 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -98,6 +98,9 @@ static struct platform_device sh_keysc_device = {
.dev = {
.platform_data = &sh_keysc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
};
static struct mtd_partition migor_nor_flash_partitions[] =
@@ -276,7 +279,7 @@ static struct resource migor_lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000, /* P4-only space */
- .end = 0xfe941fff,
+ .end = 0xfe942fff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -292,6 +295,9 @@ static struct platform_device migor_lcdc_device = {
.dev = {
.platform_data = &sh_mobile_lcdc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
};
static struct clk *camera_clk;
@@ -379,6 +385,9 @@ static struct platform_device migor_ceu_device = {
.dev = {
.platform_data = &sh_mobile_ceu_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU,
+ },
};
struct spi_gpio_platform_data sdcard_cn9_platform_data = {
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index af84904ed86..36374078e52 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -22,6 +22,7 @@
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
+#include <cpu/sh7722.h>
/* Heartbeat */
static struct heartbeat_data heartbeat_data = {
@@ -137,6 +138,9 @@ static struct platform_device sh_keysc_device = {
.dev = {
.platform_data = &sh_keysc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
};
static struct platform_device *se7722_devices[] __initdata = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 15456a0773b..00973e0f8c6 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
* SW41 : abxx xxxx -> a = 0 : Analog monitor
* 1 : Digital monitor
* b = 0 : VGA
- * 1 : SVGA
+ * 1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
*/
/* Heartbeat */
@@ -158,7 +166,7 @@ static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
- .end = 0xfe941fff,
+ .end = 0xfe942fff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -174,6 +182,9 @@ static struct platform_device lcdc_device = {
.dev = {
.platform_data = &lcdc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
};
/* CEU0 */
@@ -205,6 +216,9 @@ static struct platform_device ceu0_device = {
.dev = {
.platform_data = &sh_mobile_ceu0_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
};
/* CEU1 */
@@ -236,6 +250,9 @@ static struct platform_device ceu1_device = {
.dev = {
.platform_data = &sh_mobile_ceu1_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU1,
+ },
};
/* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -274,6 +291,9 @@ static struct platform_device keysc_device = {
.dev = {
.platform_data = &keysc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
};
/* SH Eth */
@@ -302,15 +322,19 @@ static struct platform_device sh_eth_device = {
},
.num_resources = ARRAY_SIZE(sh_eth_resources),
.resource = sh_eth_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_ETHER,
+ },
};
static struct r8a66597_platdata sh7724_usb0_host_data = {
+ .on_chip = 1,
};
static struct resource sh7724_usb0_host_resources[] = {
[0] = {
.start = 0xa4d80000,
- .end = 0xa4d800ff,
+ .end = 0xa4d80124 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -330,6 +354,38 @@ static struct platform_device sh7724_usb0_host_device = {
},
.num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
.resource = sh7724_usb0_host_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_USB0,
+ },
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+ .on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90123,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+ .name = "r8a66597_udc",
+ .id = 1, /* USB1 */
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh7724_usb1_gadget_data,
+ },
+ .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
+ .resource = sh7724_usb1_gadget_resources,
};
static struct platform_device *ms7724se_devices[] __initdata = {
@@ -342,6 +398,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&keysc_device,
&sh_eth_device,
&sh7724_usb0_host_device,
+ &sh7724_usb1_gadget_device,
};
#define EEPROM_OP 0xBA206000
@@ -421,9 +478,38 @@ static int __init devices_setup(void)
/* turn on USB clocks, use external clock */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+#ifdef CONFIG_PM
+ /* Let LED9 show STATUS2 */
+ gpio_request(GPIO_FN_STATUS2, NULL);
+
+ /* Lit LED10 show STATUS0 */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+
+ /* Lit LED11 show PDSTATUS */
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+ /* Lit LED9 */
+ gpio_request(GPIO_PTJ6, NULL);
+ gpio_direction_output(GPIO_PTJ6, 1);
+ gpio_export(GPIO_PTJ6, 0);
+
+ /* Lit LED10 */
+ gpio_request(GPIO_PTJ5, NULL);
+ gpio_direction_output(GPIO_PTJ5, 1);
+ gpio_export(GPIO_PTJ5, 0);
+
+ /* Lit LED11 */
+ gpio_request(GPIO_PTJ7, NULL);
+ gpio_direction_output(GPIO_PTJ7, 1);
+ gpio_export(GPIO_PTJ7, 0);
+#endif
+
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
+ /* enable USB1 port */
+ ctrl_outw(0x0600, 0xa4050192);
+
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -546,15 +632,15 @@ static int __init devices_setup(void)
sh_eth_init();
if (sw & SW41_B) {
- /* SVGA */
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 600;
- lcdc_info.ch[0].lcd_cfg.left_margin = 142;
- lcdc_info.ch[0].lcd_cfg.right_margin = 52;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ /* 720p */
+ lcdc_info.ch[0].lcd_cfg.xres = 1280;
+ lcdc_info.ch[0].lcd_cfg.yres = 720;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
} else {
/* VGA */
lcdc_info.ch[0].lcd_cfg.xres = 640;
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 8913ae39a80..efe4cb9f8a7 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
#include <asm/ilsel.h>
static struct resource heartbeat_resources[] = {
@@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = {
.resource = r8a66597_usb_host_resources,
};
+static struct m66592_platdata usbf_platdata = {
+ .xtal = M66592_PLATDATA_XTAL_24MHZ,
+ .vif = 1,
+};
+
static struct resource m66592_usb_peripheral_resources[] = {
[0] = {
.name = "m66592_udc",
@@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = {
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbf_platdata,
},
.num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
.resource = m66592_usb_peripheral_resources,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 13:09:34 +0000