1 files changed, 285 insertions, 0 deletions
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
new file mode 100644
index 00000000000..7c747e7d71b
--- /dev/null
+++ b/arch/sh/kernel/kgdb.c
@@ -0,0 +1,285 @@
+/*
+ * SuperH KGDB support
+ *
+ * Copyright (C) 2008  Paul Mundt
+ *
+ * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+
+char in_nmi = 0;	/* Set during NMI to prevent re-entry */
+
+/* Macros for single step instruction identification */
+#define OPCODE_BT(op)		(((op) & 0xff00) == 0x8900)
+#define OPCODE_BF(op)		(((op) & 0xff00) == 0x8b00)
+#define OPCODE_BTF_DISP(op)	(((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
+				 (((op) & 0x7f ) << 1))
+#define OPCODE_BFS(op)		(((op) & 0xff00) == 0x8f00)
+#define OPCODE_BTS(op)		(((op) & 0xff00) == 0x8d00)
+#define OPCODE_BRA(op)		(((op) & 0xf000) == 0xa000)
+#define OPCODE_BRA_DISP(op)	(((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+				 (((op) & 0x7ff) << 1))
+#define OPCODE_BRAF(op)		(((op) & 0xf0ff) == 0x0023)
+#define OPCODE_BRAF_REG(op)	(((op) & 0x0f00) >> 8)
+#define OPCODE_BSR(op)		(((op) & 0xf000) == 0xb000)
+#define OPCODE_BSR_DISP(op)	(((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+				 (((op) & 0x7ff) << 1))
+#define OPCODE_BSRF(op)		(((op) & 0xf0ff) == 0x0003)
+#define OPCODE_BSRF_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_JMP(op)		(((op) & 0xf0ff) == 0x402b)
+#define OPCODE_JMP_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_JSR(op)		(((op) & 0xf0ff) == 0x400b)
+#define OPCODE_JSR_REG(op)	(((op) >> 8) & 0xf)
+#define OPCODE_RTS(op)		((op) == 0xb)
+#define OPCODE_RTE(op)		((op) == 0x2b)
+
+#define SR_T_BIT_MASK           0x1
+#define STEP_OPCODE             0xc33d
+
+/* Calculate the new address for after a step */
+static short *get_step_address(struct pt_regs *linux_regs)
+{
+	opcode_t op = __raw_readw(linux_regs->pc);
+	long addr;
+
+	/* BT */
+	if (OPCODE_BT(op)) {
+		if (linux_regs->sr & SR_T_BIT_MASK)
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 2;
+	}
+
+	/* BTS */
+	else if (OPCODE_BTS(op)) {
+		if (linux_regs->sr & SR_T_BIT_MASK)
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 4;	/* Not in delay slot */
+	}
+
+	/* BF */
+	else if (OPCODE_BF(op)) {
+		if (!(linux_regs->sr & SR_T_BIT_MASK))
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 2;
+	}
+
+	/* BFS */
+	else if (OPCODE_BFS(op)) {
+		if (!(linux_regs->sr & SR_T_BIT_MASK))
+			addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+		else
+			addr = linux_regs->pc + 4;	/* Not in delay slot */
+	}
+
+	/* BRA */
+	else if (OPCODE_BRA(op))
+		addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
+
+	/* BRAF */
+	else if (OPCODE_BRAF(op))
+		addr = linux_regs->pc + 4
+		    + linux_regs->regs[OPCODE_BRAF_REG(op)];
+
+	/* BSR */
+	else if (OPCODE_BSR(op))
+		addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
+
+	/* BSRF */
+	else if (OPCODE_BSRF(op))
+		addr = linux_regs->pc + 4
+		    + linux_regs->regs[OPCODE_BSRF_REG(op)];
+
+	/* JMP */
+	else if (OPCODE_JMP(op))
+		addr = linux_regs->regs[OPCODE_JMP_REG(op)];
+
+	/* JSR */
+	else if (OPCODE_JSR(op))
+		addr = linux_regs->regs[OPCODE_JSR_REG(op)];
+
+	/* RTS */
+	else if (OPCODE_RTS(op))
+		addr = linux_regs->pr;
+
+	/* RTE */
+	else if (OPCODE_RTE(op))
+		addr = linux_regs->regs[15];
+
+	/* Other */
+	else
+		addr = linux_regs->pc + instruction_size(op);
+
+	flush_icache_range(addr, addr + instruction_size(op));
+	return (short *)addr;
+}
+
+/*
+ * Replace the instruction immediately after the current instruction
+ * (i.e. next in the expected flow of control) with a trap instruction,
+ * so that returning will cause only a single instruction to be executed.
+ * Note that this model is slightly broken for instructions with delay
+ * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
+ * instruction in the delay slot will be executed.
+ */
+
+static unsigned long stepped_address;
+static opcode_t stepped_opcode;
+
+static void do_single_step(struct pt_regs *linux_regs)
+{
+	/* Determine where the target instruction will send us to */
+	unsigned short *addr = get_step_address(linux_regs);
+
+	stepped_address = (int)addr;
+
+	/* Replace it */
+	stepped_opcode = __raw_readw((long)addr);
+	*addr = STEP_OPCODE;
+
+	/* Flush and return */
+	flush_icache_range((long)addr, (long)addr +
+			   instruction_size(stepped_opcode));
+}
+
+/* Undo a single step */
+static void undo_single_step(struct pt_regs *linux_regs)
+{
+	/* If we have stepped, put back the old instruction */
+	/* Use stepped_address in case we stopped elsewhere */
+	if (stepped_opcode != 0) {
+		__raw_writew(stepped_opcode, stepped_address);
+		flush_icache_range(stepped_address, stepped_address + 2);
+	}
+
+	stepped_opcode = 0;
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		gdb_regs[GDB_R0 + i] = regs->regs[i];
+
+	gdb_regs[GDB_PC] = regs->pc;
+	gdb_regs[GDB_PR] = regs->pr;
+	gdb_regs[GDB_SR] = regs->sr;
+	gdb_regs[GDB_GBR] = regs->gbr;
+	gdb_regs[GDB_MACH] = regs->mach;
+	gdb_regs[GDB_MACL] = regs->macl;
+
+	__asm__ __volatile__ ("stc vbr, %0" : "=r" (gdb_regs[GDB_VBR]));
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		regs->regs[GDB_R0 + i] = gdb_regs[GDB_R0 + i];
+
+	regs->pc = gdb_regs[GDB_PC];
+	regs->pr = gdb_regs[GDB_PR];
+	regs->sr = gdb_regs[GDB_SR];
+	regs->gbr = gdb_regs[GDB_GBR];
+	regs->mach = gdb_regs[GDB_MACH];
+	regs->macl = gdb_regs[GDB_MACL];
+
+	__asm__ __volatile__ ("ldc %0, vbr" : : "r" (gdb_regs[GDB_VBR]));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	gdb_regs[GDB_R15] = p->thread.sp;
+	gdb_regs[GDB_PC] = p->thread.pc;
+}
+
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+			       char *remcomInBuffer, char *remcomOutBuffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	/* Undo any stepping we may have done */
+	undo_single_step(linux_regs);
+
+	switch (remcomInBuffer[0]) {
+	case 'c':
+	case 's':
+		/* try to read optional parameter, pc unchanged if no parm */
+		ptr = &remcomInBuffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->pc = addr;
+	case 'D':
+	case 'k':
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		if (remcomInBuffer[0] == 's') {
+			do_single_step(linux_regs);
+			kgdb_single_step = 1;
+
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
+		}
+
+		return 0;
+	}
+
+	/* this means that we do not want to exit from the handler: */
+	return -1;
+}
+
+/*
+ * The primary entry points for the kgdb debug trap table entries.
+ */
+BUILD_TRAP_HANDLER(singlestep)
+{
+	unsigned long flags;
+	TRAP_HANDLER_DECL;
+
+	local_irq_save(flags);
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+	kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+	local_irq_restore(flags);
+}
+
+
+BUILD_TRAP_HANDLER(breakpoint)
+{
+	unsigned long flags;
+	TRAP_HANDLER_DECL;
+
+	local_irq_save(flags);
+	kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+	local_irq_restore(flags);
+}
+
+int kgdb_arch_init(void)
+{
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+	/* Breakpoint instruction: trapa #0x3c */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	.gdb_bpt_instr		= { 0x3c, 0xc3 },
+#else
+	.gdb_bpt_instr		= { 0xc3, 0x3c },
+#endif
+};