aboutsummaryrefslogtreecommitdiff
path: root/arch/v850/kernel/rte_me2_cb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/rte_me2_cb.c')
-rw-r--r--arch/v850/kernel/rte_me2_cb.c298
1 files changed, 0 insertions, 298 deletions
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dff..00000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines. */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
- see mach_reserve_bootmem for details), so just use both as one big area. */
-#define RAM_START SDRAM_ADDR
-#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
- unsigned long *ram_len)
-{
- *ram_start = RAM_START;
- *ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
- tv->tv_sec = 0;
- tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART. */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud)
-{
- /* The RTE-V850E/ME2-CB connects some general-purpose I/O
- pins on the CPU to the RTS/CTS lines of UARTB channel 0's
- serial connection.
- I/O pins P21 and P22 are RTS and CTS respectively. */
- if (chan == 0) {
- /* Put P21 & P22 in I/O port mode. */
- ME2_PORT2_PMC &= ~0x6;
- /* Make P21 and output, and P22 an input. */
- ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
- }
-
- me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
- /* Initialize interrupts. */
- me2_init_irqs ();
- rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM. */
-static inline rom_kernel_init (void)
-{
- /* If the kernel is in ROM, we have to copy any initialized data
- from ROM into RAM. */
- extern unsigned long _data_load_start, _sdata, _edata;
- register unsigned long *src = &_data_load_start;
- register unsigned long *dst = &_sdata, *end = &_edata;
-
- while (dst != end)
- *dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
- unsigned long *p1, *p2;
-
- ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
- /* vector copy to iRAM */
- p1 = (unsigned long *)0; /* v85x vector start */
- p2 = (unsigned long *)&_intv_start;
- while (p2 < (unsigned long *)&_intv_end)
- *p1++ = *p2++;
-
- ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
- /* CF card detected? */
- if (CB_CF_STS0 & 0x0030)
- return;
-
- CB_CF_REG0 = 0x0002; /* reest on */
- mdelay (10);
- CB_CF_REG0 = 0x0003; /* power on */
- mdelay (10);
- CB_CF_REG0 = 0x0001; /* reset off */
- mdelay (10);
-}
-
-static void cf_power_off (void)
-{
- CB_CF_REG0 = 0x0003; /* power on */
- mdelay (10);
- CB_CF_REG0 = 0x0002; /* reest on */
- mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
- install_interrupt_vectors ();
-
- /* CS1 SDRAM instruction cache enable */
- v850e_cache_enable (0x04, 0x03, 0);
-
- rte_cb_early_init ();
-
- /* CompactFlash power on */
- cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
- rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller. */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
- { "CB_EXTTM0", IRQ_CB_EXTTM0, 1, 1, 6 },
- { "CB_EXTSIO", IRQ_CB_EXTSIO, 1, 1, 6 },
- { "CB_TOVER", IRQ_CB_TOVER, 1, 1, 6 },
- { "CB_GINT0", IRQ_CB_GINT0, 1, 1, 6 },
- { "CB_USB", IRQ_CB_USB, 1, 1, 6 },
- { "CB_LANC", IRQ_CB_LANC, 1, 1, 6 },
- { "CB_USB_VBUS_ON", IRQ_CB_USB_VBUS_ON, 1, 1, 6 },
- { "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
- { "CB_EXTTM1", IRQ_CB_EXTTM1, 1, 1, 6 },
- { "CB_EXTTM2", IRQ_CB_EXTTM2, 1, 1, 6 },
- { 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
- cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
- /* Initalize on board PIC1 (not PIC0) enable */
- CB_PIC_INT0M = 0x0000;
- CB_PIC_INT1M = 0x0000;
- CB_PIC_INTR = 0x0000;
- CB_PIC_INTEN |= CB_PIC_INT1EN;
-
- ME2_PORT2_PMC |= 0x08; /* INTP23/SCK1 mode */
- ME2_PORT2_PFC &= ~0x08; /* INTP23 mode */
- ME2_INTR(2) &= ~0x08; /* INTP23 falling-edge detect */
- ME2_INTF(2) &= ~0x08; /* " */
-
- rte_cb_init_irqs (); /* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ. */
-void cb_pic_enable_irq (unsigned irq)
-{
- CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
- CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
- cb_pic_disable_irq (irq);
-
- if (--cb_pic_active_irqs == 0)
- free_irq (IRQ_CB_PIC, 0);
-
- CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
- struct pt_regs *regs)
-{
- irqreturn_t rval = IRQ_NONE;
- unsigned status = CB_PIC_INTR;
- unsigned enable = CB_PIC_INT1M;
-
- /* Only pay attention to enabled interrupts. */
- status &= enable;
-
- CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
- if (status) {
- unsigned mask = 1;
-
- irq = CB_PIC_BASE_IRQ;
- do {
- /* There's an active interrupt, find out which one,
- and call its handler. */
- while (! (status & mask)) {
- irq++;
- mask <<= 1;
- }
- status &= ~mask;
-
- CB_PIC_INTR = mask;
-
- /* Recursively call handle_irq to handle it. */
- handle_irq (irq, regs);
- rval = IRQ_HANDLED;
- } while (status);
- }
-
- CB_PIC_INTEN |= CB_PIC_INT1EN;
-
- return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
- int rval;
-
- if (cb_pic_active_irqs == 0) {
- rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
- IRQF_DISABLED, "cb_pic_handler", 0);
- if (rval != 0)
- return rval;
- }
-
- cb_pic_active_irqs++;
-
- cb_pic_enable_irq (irq);
-
- return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
- INITS (which is terminated by an entry with the name field == 0). */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
- struct hw_interrupt_type *hw_irq_types)
-{
- struct cb_pic_irq_init *init;
- for (init = inits; init->name; init++) {
- struct hw_interrupt_type *hwit = hw_irq_types++;
-
- hwit->typename = init->name;
-
- hwit->startup = cb_pic_startup_irq;
- hwit->shutdown = cb_pic_shutdown_irq;
- hwit->enable = cb_pic_enable_irq;
- hwit->disable = cb_pic_disable_irq;
- hwit->ack = irq_nop;
- hwit->end = irq_nop;
-
- /* Initialize kernel IRQ infrastructure for this interrupt. */
- init_irq_handlers(init->base, init->num, init->interval, hwit);
- }
-}