diff options
Diffstat (limited to 'arch/x86/include/asm/visws')
| -rw-r--r-- | arch/x86/include/asm/visws/cobalt.h | 125 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/lithium.h | 53 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/piix4.h | 107 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/sgivw.h | 5 |
4 files changed, 290 insertions, 0 deletions
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h new file mode 100644 index 00000000000..9627a8fe84e --- /dev/null +++ b/arch/x86/include/asm/visws/cobalt.h @@ -0,0 +1,125 @@ +#ifndef ASM_X86__VISWS__COBALT_H +#define ASM_X86__VISWS__COBALT_H + +#include <asm/fixmap.h> + +/* + * Cobalt SGI Visual Workstation system ASIC + */ + +#define CO_CPU_NUM_PHYS 0x1e00 +#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) + +#define CO_CPU_MAX 4 + +#define CO_CPU_PHYS 0xc2000000 +#define CO_APIC_PHYS 0xc4000000 + +/* see set_fixmap() and asm/fixmap.h */ +#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) +#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) + +/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ +#define CO_CPU_REV 0x08 +#define CO_CPU_CTRL 0x10 +#define CO_CPU_STAT 0x20 +#define CO_CPU_TIMEVAL 0x30 + +/* CO_CPU_CTRL bits */ +#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ +#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ + +/* CO_CPU_STATUS bits */ +#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ + +/* CO_CPU_TIMEVAL value */ +#define CO_TIME_HZ 100000000 /* Cobalt core rate */ + +/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ +#define CO_APIC_HI(n) (((n) * 0x10) + 4) +#define CO_APIC_LO(n) ((n) * 0x10) +#define CO_APIC_ID 0x0ffc + +/* CO_APIC_ID bits */ +#define CO_APIC_ENABLE 0x00000100 + +/* CO_APIC_LO bits */ +#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ +#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ + +/* + * Where things are physically wired to Cobalt + * #defines with no board _<type>_<rev>_ are common to all (thus far) + */ +#define CO_APIC_IDE0 4 +#define CO_APIC_IDE1 2 /* Only on 320 */ + +#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ + +/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ +#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ +#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ + +#define CO_APIC_PIIX4_USB 7 /* this one is weird */ + +/* Lithium PCI Bridge B -- "the one with PIIX4" */ +#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ +#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ + +#define CO_APIC_VIDOUT0 16 +#define CO_APIC_VIDOUT1 17 +#define CO_APIC_VIDIN0 18 +#define CO_APIC_VIDIN1 19 + +#define CO_APIC_LI_AUDIO 22 + +#define CO_APIC_AS 24 +#define CO_APIC_RE 25 + +#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ +#define CO_APIC_NMI 29 +#define CO_APIC_LAST CO_APIC_NMI + +/* + * This is how irqs are assigned on the Visual Workstation. + * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). + * All other devices (including PCI) go to Cobalt and are irq's 16 on up. + */ +#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ +#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) +#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ +#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ +#define CO_IRQ_IDE0 14 /* knowledge of... */ +#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ +#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) + +#ifdef CONFIG_X86_VISWS_APIC +static inline void co_cpu_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; +} + +static inline unsigned long co_cpu_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); +} + +static inline void co_apic_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; +} + +static inline unsigned long co_apic_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); +} +#endif + +extern char visws_board_type; + +#define VISWS_320 0 +#define VISWS_540 1 + +extern char visws_board_rev; + +#endif /* ASM_X86__VISWS__COBALT_H */ diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h new file mode 100644 index 00000000000..b36d3b378c6 --- /dev/null +++ b/arch/x86/include/asm/visws/lithium.h @@ -0,0 +1,53 @@ +#ifndef ASM_X86__VISWS__LITHIUM_H +#define ASM_X86__VISWS__LITHIUM_H + +#include <asm/fixmap.h> + +/* + * Lithium is the SGI Visual Workstation I/O ASIC + */ + +#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */ +#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */ + +/* see set_fixmap() and asm/fixmap.h */ +#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA)) +#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB)) + +/* Not a standard PCI? (not in linux/pci.h) */ +#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */ +#define LI_PCI_INTEN 0x46 + +/* LI_PCI_INTENT bits */ +#define LI_INTA_0 0x0001 +#define LI_INTA_1 0x0002 +#define LI_INTA_2 0x0004 +#define LI_INTA_3 0x0008 +#define LI_INTA_4 0x0010 +#define LI_INTB 0x0020 +#define LI_INTC 0x0040 +#define LI_INTD 0x0080 + +/* More special purpose macros... */ +static inline void li_pcia_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v; +} + +static inline unsigned short li_pcia_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIA_VADDR+reg)); +} + +static inline void li_pcib_write16(unsigned long reg, unsigned short v) +{ + *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v; +} + +static inline unsigned short li_pcib_read16(unsigned long reg) +{ + return *((volatile unsigned short *)(LI_PCIB_VADDR+reg)); +} + +#endif /* ASM_X86__VISWS__LITHIUM_H */ + diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h new file mode 100644 index 00000000000..61c938045ec --- /dev/null +++ b/arch/x86/include/asm/visws/piix4.h @@ -0,0 +1,107 @@ +#ifndef ASM_X86__VISWS__PIIX4_H +#define ASM_X86__VISWS__PIIX4_H + +/* + * PIIX4 as used on SGI Visual Workstations + */ + +#define PIIX_PM_START 0x0F80 + +#define SIO_GPIO_START 0x0FC0 + +#define SIO_PM_START 0x0FC8 + +#define PMBASE PIIX_PM_START +#define GPIREG0 (PMBASE+0x30) +#define GPIREG(x) (GPIREG0+((x)/8)) +#define GPIBIT(x) (1 << ((x)%8)) + +#define PIIX_GPI_BD_ID1 18 +#define PIIX_GPI_BD_ID2 19 +#define PIIX_GPI_BD_ID3 20 +#define PIIX_GPI_BD_ID4 21 +#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) +#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ + GPIBIT(PIIX_GPI_BD_ID2) | \ + GPIBIT(PIIX_GPI_BD_ID3) | \ + GPIBIT(PIIX_GPI_BD_ID4) ) + +#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) + +#define SIO_INDEX 0x2e +#define SIO_DATA 0x2f + +#define SIO_DEV_SEL 0x7 +#define SIO_DEV_ENB 0x30 +#define SIO_DEV_MSB 0x60 +#define SIO_DEV_LSB 0x61 + +#define SIO_GP_DEV 0x7 + +#define SIO_GP_BASE SIO_GPIO_START +#define SIO_GP_MSB (SIO_GP_BASE>>8) +#define SIO_GP_LSB (SIO_GP_BASE&0xff) + +#define SIO_GP_DATA1 (SIO_GP_BASE+0) + +#define SIO_PM_DEV 0x8 + +#define SIO_PM_BASE SIO_PM_START +#define SIO_PM_MSB (SIO_PM_BASE>>8) +#define SIO_PM_LSB (SIO_PM_BASE&0xff) +#define SIO_PM_INDEX (SIO_PM_BASE+0) +#define SIO_PM_DATA (SIO_PM_BASE+1) + +#define SIO_PM_FER2 0x1 + +#define SIO_PM_GP_EN 0x80 + + + +/* + * This is the dev/reg where generating a config cycle will + * result in a PCI special cycle. + */ +#define SPECIAL_DEV 0xff +#define SPECIAL_REG 0x00 + +/* + * PIIX4 needs to see a special cycle with the following data + * to be convinced the processor has gone into the stop grant + * state. PIIX4 insists on seeing this before it will power + * down a system. + */ +#define PIIX_SPECIAL_STOP 0x00120002 + +#define PIIX4_RESET_PORT 0xcf9 +#define PIIX4_RESET_VAL 0x6 + +#define PMSTS_PORT 0xf80 // 2 bytes PM Status +#define PMEN_PORT 0xf82 // 2 bytes PM Enable +#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control + +#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state + +/* + * PMSTS and PMEN I/O bit definitions. + * (Bits are the same in both registers) + */ +#define PM_STS_RSM (1<<15) // Resume Status +#define PM_STS_PWRBTNOR (1<<11) // Power Button Override +#define PM_STS_RTC (1<<10) // RTC status +#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? +#define PM_STS_GBL (1<<5) // Global Status +#define PM_STS_BM (1<<4) // Bus Master Status +#define PM_STS_TMROF (1<<0) // Timer Overflow Status. + +/* + * Stop clock GPI register + */ +#define PIIX_GPIREG0 (0xf80 + 0x30) + +/* + * Stop clock GPI bit in GPIREG0 + */ +#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in + +#endif /* ASM_X86__VISWS__PIIX4_H */ diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h new file mode 100644 index 00000000000..5fbf63e1003 --- /dev/null +++ b/arch/x86/include/asm/visws/sgivw.h @@ -0,0 +1,5 @@ +/* + * Frame buffer position and size: + */ +extern unsigned long sgivwfb_mem_phys; +extern unsigned long sgivwfb_mem_size; |