diff options
Diffstat (limited to 'arch/x86/mach-visws/setup.c')
| -rw-r--r-- | arch/x86/mach-visws/setup.c | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c deleted file mode 100644 index de4c9dbd086..00000000000 --- a/arch/x86/mach-visws/setup.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Unmaintained SGI Visual Workstation support. - * Split out from setup.c by davej@suse.de - */ - -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> - -#include <asm/fixmap.h> -#include <asm/arch_hooks.h> -#include <asm/io.h> -#include <asm/e820.h> -#include <asm/setup.h> -#include "cobalt.h" -#include "piix4.h" - -int no_broadcast; - -char visws_board_type = -1; -char visws_board_rev = -1; - -void __init visws_get_board_type_and_rev(void) -{ - int raw; - - visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) - >> PIIX_GPI_BD_SHIFT; - /* - * Get Board rev. - * First, we have to initialize the 307 part to allow us access - * to the GPIO registers. Let's map them at 0x0fc0 which is right - * after the PIIX4 PM section. - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable GPIO registers. */ - - /* - * Now, we have to map the power management section to write - * a bit which enables access to the GPIO registers. - * What lunatic came up with this shit? - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable PM registers. */ - - /* - * Now, write the PM register which enables the GPIO registers. - */ - outb_p(SIO_PM_FER2, SIO_PM_INDEX); - outb_p(SIO_PM_GP_EN, SIO_PM_DATA); - - /* - * Now, initialize the GPIO registers. - * We want them all to be inputs which is the - * power on default, so let's leave them alone. - * So, let's just read the board rev! - */ - raw = inb_p(SIO_GP_DATA1); - raw &= 0x7f; /* 7 bits of valid board revision ID. */ - - if (visws_board_type == VISWS_320) { - if (raw < 0x6) { - visws_board_rev = 4; - } else if (raw < 0xc) { - visws_board_rev = 5; - } else { - visws_board_rev = 6; - } - } else if (visws_board_type == VISWS_540) { - visws_board_rev = 2; - } else { - visws_board_rev = raw; - } - - printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", - (visws_board_type == VISWS_320 ? "320" : - (visws_board_type == VISWS_540 ? "540" : - "unknown")), visws_board_rev); -} - -void __init pre_intr_init_hook(void) -{ - init_VISWS_APIC_irqs(); -} - -void __init intr_init_hook(void) -{ -#ifdef CONFIG_X86_LOCAL_APIC - apic_intr_init(); -#endif -} - -void __init pre_setup_arch_hook() -{ - visws_get_board_type_and_rev(); -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_IRQPOLL, - .name = "timer", -}; - -void __init time_init_hook(void) -{ - printk(KERN_INFO "Starting Cobalt Timer system clock\n"); - - /* Set the countdown value */ - co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); - - /* Start the timer */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); - - /* Enable (unmask) the timer interrupt */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); - - /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */ - setup_irq(0, &irq0); -} - -/* Hook for machine specific memory setup. */ - -#define MB (1024 * 1024) - -unsigned long sgivwfb_mem_phys; -unsigned long sgivwfb_mem_size; -EXPORT_SYMBOL(sgivwfb_mem_phys); -EXPORT_SYMBOL(sgivwfb_mem_size); - -long long mem_size __initdata = 0; - -char * __init machine_specific_memory_setup(void) -{ - long long gfx_mem_size = 8 * MB; - - mem_size = boot_params.alt_mem_k; - - if (!mem_size) { - printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); - mem_size = 128 * MB; - } - - /* - * this hardcodes the graphics memory to 8 MB - * it really should be sized dynamically (or at least - * set as a boot param) - */ - if (!sgivwfb_mem_size) { - printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); - sgivwfb_mem_size = 8 * MB; - } - - /* - * Trim to nearest MB - */ - sgivwfb_mem_size &= ~((1 << 20) - 1); - sgivwfb_mem_phys = mem_size - gfx_mem_size; - - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); - add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); - - return "PROM"; -} |