aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap1/Kconfig2
-rw-r--r--arch/avr32/Kconfig6
-rw-r--r--arch/blackfin/Kconfig6
-rw-r--r--arch/cris/Kconfig6
-rw-r--r--arch/cris/arch-v32/Kconfig2
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v32/mach-fs/Kconfig2
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/platforms/Kconfig2
-rw-r--r--arch/powerpc/sysdev/bestcomm/Kconfig4
-rw-r--r--arch/sh/Kconfig4
-rw-r--r--arch/x86/Kconfig4
13 files changed, 22 insertions, 22 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 3f325d3718a..cd8de89c5fa 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -109,7 +109,7 @@ config MACH_OMAP_PALMZ71
help
Support for the Palm Zire71 PDA. To boot the kernel,
you'll need a PalmOS compatible bootloader; check out
- http://hackndev.com/palm/z71 for more informations.
+ http://hackndev.com/palm/z71 for more information.
Say Y here if you have such a PDA, say N otherwise.
config MACH_OMAP_PALMTT
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 05fe3053dca..414a8ad97f5 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -127,13 +127,13 @@ config BOARD_HAMMERHEAD
select CPU_AT32AP7000
select USB_ARCH_HAS_HCD
help
- The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel.
+ The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel.
It offers versatile peripherals, such as ethernet, usb device, usb host etc.
- The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered
+ The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered
Device (PD).
- Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
+ Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which
will cover even the most exceptional need of memory bandwidth. Together with the onboard
video decoder the board is ready for video processing.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 0c1f86e3e44..3640cdc38aa 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -777,7 +777,7 @@ config CACHELINE_ALIGNED_L1
default n if BF54x
depends on !BF531
help
- If enabled, cacheline_anligned data is linked
+ If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency)
config SYSCALL_TAB_L1
@@ -957,7 +957,7 @@ config MPU
memory they do not own. This comes at a performance penalty
and is recommended only for debugging.
-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"
menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
@@ -989,7 +989,7 @@ config C_B3PEN
default n
choice
- prompt"Enable Asynchonous Memory Banks"
+ prompt "Enable Asynchronous Memory Banks"
default C_AMBEN_ALL
config C_AMBEN
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3462245fe9f..7adac388a77 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -438,7 +438,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
help
Enables the DMA1 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -565,7 +565,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
help
Enables the DMA7 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -604,7 +604,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
help
Enables the DMA3 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b3f7f..21bbd93be34 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config ETRAX_NBR_LED_GRP_ONE
help
Select this if you want one Ethernet LED group. This LED group
can be used for one or more Ethernet interfaces. However, it is
- recomended that each Ethernet interface use a dedicated LED group.
+ recommended that each Ethernet interface use a dedicated LED group.
config ETRAX_NBR_LED_GRP_TWO
bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fcef9d0..b9e328e688b 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
help
Enables the DMA9 input channel for ser4 (ttyS4).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d74475f1c..774de82abef 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
depends on ETRAX_ARCH_V32
default "0"
help
- SDRAM configuration for group 1. The defult value is 0
+ SDRAM configuration for group 1. The default value is 0
because group 1 is not used in the default configuration,
described in the help for SDRAM_GRP0_CONFIG.
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 206cb7953b0..92508c52167 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -136,7 +136,7 @@ config MACH_JAZZ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
- Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
Olivetti M700-10 workstations.
config LASAT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 74cc312c347..2e2160c3de7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -342,7 +342,7 @@ config PHYP_DUMP
help
Hypervisor-assisted dump is meant to be a kdump replacement
offering robustness and speed not possible without system
- hypervisor assistence.
+ hypervisor assistance.
If unsure, say "N"
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 200b9cb900e..9a8bb53d315 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -298,7 +298,7 @@ config CPM
config OF_RTC
bool
help
- Uses information from the OF or flattened device tree to instatiate
+ Uses information from the OF or flattened device tree to instantiate
platform devices for direct mapped RTC chips like the DS1742 or DS1743.
source "arch/powerpc/sysdev/bestcomm/Kconfig"
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 0b192a1c429..29e427085ef 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
select PPC_LIB_RHEAP
help
BestComm is the name of the communication coprocessor found
- on the Freescale MPC5200 family of processor. It's usage is
- optionnal for some drivers (like ATA), but required for
+ on the Freescale MPC5200 family of processor. Its usage is
+ optional for some drivers (like ATA), but required for
others (like FEC).
If you want to use drivers that require DMA operations,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8d50d527c59..2d52b515c24 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -640,10 +640,10 @@ config GUSA_RB
depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
help
Enabling this option will allow the kernel to implement some
- atomic operations using a software implemention of load-locked/
+ atomic operations using a software implementation of load-locked/
store-conditional (LLSC). On machines which do not have hardware
LLSC, this should be more efficient than the other alternative of
- disabling insterrupts around the atomic sequence.
+ disabling interrupts around the atomic sequence.
endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 06c02c00d7d..d7b5621382f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1129,7 +1129,7 @@ config NODES_SHIFT
depends on NEED_MULTIPLE_NODES
---help---
Specify the maximum number of NUMA Nodes available on the target
- system. Increases memory reserved to accomodate various tables.
+ system. Increases memory reserved to accommodate various tables.
config HAVE_ARCH_BOOTMEM
def_bool y
@@ -1307,7 +1307,7 @@ config MTRR_SANITIZER
add writeback entries.
Can be disabled with disable_mtrr_cleanup on the kernel command line.
- The largest mtrr entry size for a continous block can be set with
+ The largest mtrr entry size for a continuous block can be set with
mtrr_chunk_size.
If unsure, say Y.