diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/gpio-core.h | 34 | ||||
| -rw-r--r-- | arch/arm/mach-s3c6400/include/mach/gpio-core.h | 21 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/Kconfig | 27 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/gpio-config.c | 163 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h | 176 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/gpio-cfg.h | 110 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/gpio-core.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/gpiolib.c | 6 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/Kconfig | 3 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/gpiolib.c | 75 |
11 files changed, 619 insertions, 6 deletions
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h new file mode 100644 index 00000000000..6c9fbb99ef1 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -0,0 +1,34 @@ +/* arch/arm/mach-s3c24100/include/mach/gpio-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C2410 - GPIO core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_CORE_H +#define __ASM_ARCH_GPIO_CORE_H __FILE__ + +#include <plat/gpio-core.h> +#include <mach/regs-gpio.h> + +extern struct s3c_gpio_chip s3c24xx_gpios[]; + +static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) +{ + struct s3c_gpio_chip *chip; + + if (pin > S3C2410_GPG10) + return NULL; + + chip = &s3c24xx_gpios[pin/32]; + return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; +} + +#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h new file mode 100644 index 00000000000..d89aae68b0a --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/gpio-core.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s3c6400/include/mach/gpio-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_CORE_H +#define __ASM_ARCH_GPIO_CORE_H __FILE__ + +/* currently we just include the platform support */ +#include <plat/gpio-core.h> + +#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 77fc38f5187..45e62cba595 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -120,6 +120,33 @@ config S3C_GPIO_TRACK Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + # device definitions to compile in config S3C_DEV_HSMMC diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 4d0299aef7c..68a3451a2d9 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -16,6 +16,7 @@ obj-y += time.o obj-y += clock.o obj-y += pwm-clock.o obj-y += gpio.o +obj-y += gpio-config.o # devices diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c new file mode 100644 index 00000000000..7642b975a99 --- /dev/null +++ b/arch/arm/plat-s3c/gpio-config.c @@ -0,0 +1,163 @@ +/* linux/arch/arm/plat-s3c/gpio-config.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO configuration core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setcfg(chip, offset, config); + local_irq_restore(flags); + + return ret; +} + +int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setpull(chip, offset, pull); + local_irq_restore(flags); + + return ret; +} + +#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX +int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif + +#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX +int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio >= 8) + reg -= 4; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ + +#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN +int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + return (__force s3c_gpio_pull_t)pup; +} +#endif diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h new file mode 100644 index 00000000000..652e2bbdaa2 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h @@ -0,0 +1,176 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This is meant for core cpu support, machine or other driver files + * should not be including this header. + */ + +#ifndef __PLAT_GPIO_CFG_HELPERS_H +#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ + +/* As a note, all gpio configuration functions are entered exclusively, either + * with the relevant lock held or the system prevented from doing anything else + * by disabling interrupts. +*/ + +static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int config) +{ + return (chip->config->set_config)(chip, off, config); +} + +static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return (chip->config->set_pull)(chip, off, pull); +} + +/** + * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function +*/ +extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. +*/ +extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of functions for + * each case. +*/ +extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + + +/* Pull-{up,down} resistor controls. + * + * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2412,S3C2413 = Pull-Down + * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] + * S3C2443 = Pull-Both [not same as S3C6400] + */ + +/** + * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-up resistor. + */ +extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * @chip: The gpio chip that is being configured + * @off: The offset for the GPIO being configured + * @param: pull: The pull mode being requested + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-down resistor. + */ +extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = No pull resistor connected + * 01 = Pull-up resistor connected + * 10 = Pull-down resistor connected + */ +extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + + +/** + * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off); + +/** + * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = Pull-up resistor connected + * 10 = Pull-down resistor connected + * x1 = No pull up resistor + */ +extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * @chip: The gpio chip that the GPIO pin belongs to. + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +#endif /* __PLAT_GPIO_CFG_HELPERS_H */ + diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h new file mode 100644 index 00000000000..29cd6a86cad --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h @@ -0,0 +1,110 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +/* Note, this interface is being added to the s3c64xx arch first and will + * be added to the s3c24xx systems later. + */ + +#ifndef __PLAT_GPIO_CFG_H +#define __PLAT_GPIO_CFG_H __FILE__ + +typedef unsigned int __bitwise__ s3c_gpio_pull_t; + +/* forward declaration if gpio-core.h hasn't been included */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_cfg GPIO configuration + * @cfg_eint: Configuration setting when used for external interrupt source + * @get_pull: Read the current pull configuration for the GPIO + * @set_pull: Set the current pull configuraiton for the GPIO + * @set_config: Set the current configuration for the GPIO + * @get_config: Read the current configuration for the GPIO + * + * Each chip can have more than one type of GPIO bank available and some + * have different capabilites even when they have the same control register + * layouts. Provide an point to vector control routine and provide any + * per-bank configuration information that other systems such as the + * external interrupt code will need. + */ +struct s3c_gpio_cfg { + unsigned int cfg_eint; + + s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, + s3c_gpio_pull_t pull); + + unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned config); +}; + +#define S3C_GPIO_SPECIAL_MARK (0xfffffff0) +#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x)) + +/* Defines for generic pin configurations */ +#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0)) +#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) +#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) + +#define s3c_gpio_is_cfg_special(_cfg) \ + (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) + +/** + * s3c_gpio_cfgpin() - Change the GPIO function of a pin. + * @pin pin The pin number to configure. + * @pin to The configuration for the pin's function. + * + * Configure which function is actually connected to the external + * pin, such as an gpio input, output or some form of special function + * connected to an internal peripheral block. + */ +extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); + +/* Define values for the pull-{up,down} available for each gpio pin. + * + * These values control the state of the weak pull-{up,down} resistors + * available on most pins on the S3C series. Not all chips support both + * up or down settings, and it may be dependant on the chip that is being + * used to whether the particular mode is available. + */ +#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) + +/** + * s3c_gpio_setpull() - set the state of a gpio pin pull resistor + * @pin: The pin number to configure the pull resistor. + * @pull: The configuration for the pull resistor. + * + * This function sets the state of the pull-{up,down} resistor for the + * specified pin. It will return 0 if successfull, or a negative error + * code if the pin cannot support the requested pull setting. +*/ +extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull() - get the pull resistor state of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the pull resistor value for the specified pin. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); + +#endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h index ad68b32a7f9..2fc60a580ac 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -20,16 +20,20 @@ * specific code. */ +struct s3c_gpio_cfg; + /** * struct s3c_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. + * @config: special function and pull-resistor control information. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. */ struct s3c_gpio_chip { struct gpio_chip chip; + struct s3c_gpio_cfg *config; void __iomem *base; }; @@ -48,7 +52,6 @@ static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) */ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); - /* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios * for use with the configuration calls, and other parts of the s3c gpiolib * support code. @@ -65,8 +68,10 @@ extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) { - return s3c_gpios[chip]; + return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; } #else +/* machine specific code should provide s3c_gpiolib_getchip */ + static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } #endif diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 9785a8fb480..f95c6c9d9f1 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -59,7 +59,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, return 0; } -static struct s3c_gpio_chip gpios[] = { +struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), .chip = { @@ -129,10 +129,10 @@ static struct s3c_gpio_chip gpios[] = { static __init int s3c24xx_gpiolib_init(void) { - struct s3c_gpio_chip *chip = gpios; + struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++) + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) s3c_gpiolib_add(chip); return 0; diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index 3df2ec19d08..842200abeb3 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -15,6 +15,9 @@ config PLAT_S3C64XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select S3C_GPIO_CFG_S3C64XX help Base platform code for any Samsung S3C64XX device diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 28ba23502bc..cc62941d7b5 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -18,8 +18,10 @@ #include <mach/map.h> #include <mach/gpio.h> +#include <mach/gpio-core.h> -#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> #include <plat/regs-gpio.h> /* GPIO bank summary: @@ -52,6 +54,12 @@ #define con_4bit_shift(__off) ((__off) * 4) +#if 1 +#define gpio_dbg(x...) do { } while(0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#endif + /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the * following example: @@ -77,6 +85,8 @@ static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset) con &= ~(0xf << con_4bit_shift(offset)); __raw_writel(con, base + OFF_GPCON); + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + return 0; } @@ -102,6 +112,8 @@ static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip, __raw_writel(con, base + OFF_GPCON); __raw_writel(dat, base + OFF_GPDAT); + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + return 0; } @@ -142,6 +154,8 @@ static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset) con &= ~(0xf << con_4bit_shift(offset)); __raw_writel(con, regcon); + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + return 0; } @@ -174,12 +188,35 @@ static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip, __raw_writel(con, regcon); __raw_writel(dat, base + OFF_GPDAT); + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + return 0; } +static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { + .cfg_eint = 7, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + static struct s3c_gpio_chip gpio_4bit[] = { { .base = S3C64XX_GPA_BASE, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPA(0), .ngpio = S3C64XX_GPIO_A_NR, @@ -187,6 +224,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPB_BASE, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPB(0), .ngpio = S3C64XX_GPIO_B_NR, @@ -194,6 +232,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPC_BASE, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPC(0), .ngpio = S3C64XX_GPIO_C_NR, @@ -201,6 +240,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPD_BASE, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPD(0), .ngpio = S3C64XX_GPIO_D_NR, @@ -208,6 +248,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPE_BASE, + .config = &gpio_4bit_cfg_noint, .chip = { .base = S3C64XX_GPE(0), .ngpio = S3C64XX_GPIO_E_NR, @@ -215,6 +256,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPG_BASE, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPG(0), .ngpio = S3C64XX_GPIO_G_NR, @@ -222,6 +264,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { }, }, { .base = S3C64XX_GPM_BASE, + .config = &gpio_4bit_cfg_eint0011, .chip = { .base = S3C64XX_GPM(0), .ngpio = S3C64XX_GPIO_M_NR, @@ -233,6 +276,7 @@ static struct s3c_gpio_chip gpio_4bit[] = { static struct s3c_gpio_chip gpio_4bit2[] = { { .base = S3C64XX_GPH_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0111, .chip = { .base = S3C64XX_GPH(0), .ngpio = S3C64XX_GPIO_H_NR, @@ -240,6 +284,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { }, }, { .base = S3C64XX_GPK_BASE + 0x4, + .config = &gpio_4bit_cfg_noint, .chip = { .base = S3C64XX_GPK(0), .ngpio = S3C64XX_GPIO_K_NR, @@ -247,6 +292,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { }, }, { .base = S3C64XX_GPL_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0011, .chip = { .base = S3C64XX_GPL(0), .ngpio = S3C64XX_GPIO_L_NR, @@ -255,9 +301,30 @@ static struct s3c_gpio_chip gpio_4bit2[] = { }, }; +static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + static struct s3c_gpio_chip gpio_2bit[] = { { .base = S3C64XX_GPF_BASE, + .config = &gpio_2bit_cfg_eint11, .chip = { .base = S3C64XX_GPF(0), .ngpio = S3C64XX_GPIO_F_NR, @@ -265,6 +332,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPI_BASE, + .config = &gpio_2bit_cfg_noint, .chip = { .base = S3C64XX_GPI(0), .ngpio = S3C64XX_GPIO_I_NR, @@ -272,6 +340,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPJ_BASE, + .config = &gpio_2bit_cfg_noint, .chip = { .base = S3C64XX_GPJ(0), .ngpio = S3C64XX_GPIO_J_NR, @@ -279,6 +348,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPN_BASE, + .config = &gpio_2bit_cfg_eint10, .chip = { .base = S3C64XX_GPN(0), .ngpio = S3C64XX_GPIO_N_NR, @@ -286,6 +356,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPO_BASE, + .config = &gpio_2bit_cfg_eint11, .chip = { .base = S3C64XX_GPO(0), .ngpio = S3C64XX_GPIO_O_NR, @@ -293,6 +364,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPP_BASE, + .config = &gpio_2bit_cfg_eint11, .chip = { .base = S3C64XX_GPP(0), .ngpio = S3C64XX_GPIO_P_NR, @@ -300,6 +372,7 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPQ_BASE, + .config = &gpio_2bit_cfg_eint11, .chip = { .base = S3C64XX_GPQ(0), .ngpio = S3C64XX_GPIO_Q_NR, |