aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/Kconfig37
-rw-r--r--drivers/acpi/Makefile1
-rw-r--r--drivers/acpi/ibm_acpi.c2798
3 files changed, 0 insertions, 2836 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e2ce4a9c1c9..45c43150826 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -218,43 +218,6 @@ config ACPI_ASUS
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
-config ACPI_IBM
- tristate "IBM ThinkPad Laptop Extras"
- depends on X86
- select BACKLIGHT_CLASS_DEVICE
- ---help---
- This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
- support for Fn-Fx key combinations, Bluetooth control, video
- output switching, ThinkLight control, UltraBay eject and more.
- For more information about this driver see <file:Documentation/ibm-acpi.txt>
- and <http://ibm-acpi.sf.net/> .
-
- If you have an IBM ThinkPad laptop, say Y or M here.
-
-config ACPI_IBM_DOCK
- bool "Legacy Docking Station Support"
- depends on ACPI_IBM
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the ibm_acpi driver to handle docking station events.
- This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will
- allow locking and removing the laptop from the docking station,
- but will not properly connect PCI devices.
-
- If you are not sure, say N here.
-
-config ACPI_IBM_BAY
- bool "Legacy Removable Bay Support"
- depends on ACPI_IBM
- default y
- ---help---
- Allows the ibm_acpi driver to handle removable bays. It will allow
- disabling the device in the bay, and also generate notifications when
- the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5956e9f64a8..92642ab1545 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
-obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
deleted file mode 100644
index dc1096608f4..00000000000
--- a/drivers/acpi/ibm_acpi.c
+++ /dev/null
@@ -1,2798 +0,0 @@
-/*
- * ibm_acpi.c - IBM ThinkPad ACPI Extras
- *
- *
- * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
- * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define IBM_VERSION "0.13"
-
-/*
- * Changelog:
- *
- * 2006-11-22 0.13 new maintainer
- * changelog now lives in git commit history, and will
- * not be updated further in-file.
- *
- * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
- * 2005-03-17 0.11 support for 600e, 770x
- * thanks to Jamie Lentin <lentinj@dial.pipex.com>
- * support for 770e, G41
- * G40 and G41 don't have a thinklight
- * temperatures no longer experimental
- * experimental brightness control
- * experimental volume control
- * experimental fan enable/disable
- * 2005-01-16 0.10 fix module loading on R30, R31
- * 2005-01-16 0.9 support for 570, R30, R31
- * ultrabay support on A22p, A3x
- * limit arg for cmos, led, beep, drop experimental status
- * more capable led control on A21e, A22p, T20-22, X20
- * experimental temperatures and fan speed
- * experimental embedded controller register dump
- * mark more functions as __init, drop incorrect __exit
- * use MODULE_VERSION
- * thanks to Henrik Brix Andersen <brix@gentoo.org>
- * fix parameter passing on module loading
- * thanks to Rusty Russell <rusty@rustcorp.com.au>
- * thanks to Jim Radford <radford@blackbean.org>
- * 2004-11-08 0.8 fix init error case, don't return from a macro
- * thanks to Chris Wright <chrisw@osdl.org>
- * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20
- * fix led control on A21e
- * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device
- * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20
- * proc file format changed
- * video_switch command
- * experimental cmos control
- * experimental led control
- * experimental acpi sounds
- * 2004-09-16 0.4 support for module parameters
- * hotkey mask can be prefixed by 0x
- * video output switching
- * video expansion control
- * ultrabay eject support
- * removed lcd brightness/on/off control, didn't work
- * 2004-08-17 0.3 support for R40
- * lcd off, brightness control
- * thinklight on/off
- * 2004-08-14 0.2 support for T series, X20
- * bluetooth enable/disable
- * hotkey events disabled by default
- * removed fan control, currently useless
- * 2004-08-09 0.1 initial release, support for X series
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <asm/uaccess.h>
-
-#include <linux/dmi.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/acnamesp.h>
-
-#define IBM_NAME "ibm"
-#define IBM_DESC "IBM ThinkPad ACPI Extras"
-#define IBM_FILE "ibm_acpi"
-#define IBM_URL "http://ibm-acpi.sf.net/"
-
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
-MODULE_DESCRIPTION(IBM_DESC);
-MODULE_VERSION(IBM_VERSION);
-MODULE_LICENSE("GPL");
-
-#define IBM_DIR IBM_NAME
-
-#define IBM_LOG IBM_FILE ": "
-#define IBM_ERR KERN_ERR IBM_LOG
-#define IBM_NOTICE KERN_NOTICE IBM_LOG
-#define IBM_INFO KERN_INFO IBM_LOG
-#define IBM_DEBUG KERN_DEBUG IBM_LOG
-
-#define IBM_MAX_ACPI_ARGS 3
-
-#define __unused __attribute__ ((unused))
-
-static int experimental;
-module_param(experimental, int, 0);
-
-static acpi_handle root_handle = NULL;
-
-#define IBM_HANDLE(object, parent, paths...) \
- static acpi_handle object##_handle; \
- static acpi_handle *object##_parent = &parent##_handle; \
- static char *object##_path; \
- static char *object##_paths[] = { paths }
-
-IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
- "\\_SB.PCI.ISA.EC", /* 570 */
- "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
- "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */
- "\\_SB.PCI0.ICH3.EC0", /* R31 */
- "\\_SB.PCI0.LPC.EC", /* all others */
- );
-
-IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */
- "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
- "\\_SB.PCI0.VID0", /* 770e */
- "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
- "\\_SB.PCI0.AGP.VID", /* all others */
- ); /* R30, R31 */
-
-IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */
-
-IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */
- "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */
- "\\CMS", /* R40, R40e */
- ); /* all others */
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
- "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
- "\\_SB.PCI0.PCI1.DOCK", /* all others */
- "\\_SB.PCI.ISA.SLCE", /* 570 */
- ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
- "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
- "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
- ); /* A21e, R30, R31 */
-
-IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
- "_EJ0", /* all others */
- ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-
-IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
- "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
- ); /* all others */
-
-IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
- "_EJ0", /* 770x */
- ); /* all others */
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
-
-IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */
- "^HKEY", /* R30, R31 */
- "HKEY", /* all others */
- ); /* 570 */
-
-IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */
-IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */
-
-IBM_HANDLE(led, ec, "SLED", /* 570 */
- "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- "LED", /* all others */
- ); /* R30, R31 */
-
-IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
-IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
-IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
-IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */
-
-IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
- "\\FSPD", /* 600e/x, 770e, 770x */
- ); /* all others */
-
-IBM_HANDLE(sfan, ec, "SFAN", /* 570 */
- "JFNS", /* 770x-JL */
- ); /* all others */
-
-#define IBM_HKEY_HID "IBM0068"
-#define IBM_PCI_HID "PNP0A03"
-
-enum thermal_access_mode {
- IBMACPI_THERMAL_NONE = 0, /* No thermal support */
- IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
- IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
- IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
- IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
-};
-
-#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
-struct ibm_thermal_sensors_struct {
- s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
-};
-
-/*
- * FAN ACCESS MODES
- *
- * IBMACPI_FAN_RD_ACPI_GFAN:
- * ACPI GFAN method: returns fan level
- *
- * see IBMACPI_FAN_WR_ACPI_SFAN
- * EC 0x2f not available if GFAN exists
- *
- * IBMACPI_FAN_WR_ACPI_SFAN:
- * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
- *
- * EC 0x2f might be available *for reading*, but never for writing.
- *
- * IBMACPI_FAN_WR_TPEC:
- * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
- * on almost all ThinkPads
- *
- * Fan speed changes of any sort (including those caused by the
- * disengaged mode) are usually done slowly by the firmware as the
- * maximum ammount of fan duty cycle change per second seems to be
- * limited.
- *
- * Reading is not available if GFAN exists.
- * Writing is not available if SFAN exists.
- *
- * Bits
- * 7 automatic mode engaged;
- * (default operation mode of the ThinkPad)
- * fan level is ignored in this mode.
- * 6 disengage mode (takes precedence over bit 7);
- * not available on all thinkpads. May disable
- * the tachometer, and speeds up fan to 100% duty-cycle,
- * which speeds it up far above the standard RPM
- * levels. It is not impossible that it could cause
- * hardware damage.
- * 5-3 unused in some models. Extra bits for fan level
- * in others, but still useless as all values above
- * 7 map to the same speed as level 7 in these models.
- * 2-0 fan level (0..7 usually)
- * 0x00 = stop
- * 0x07 = max (set when temperatures critical)
- * Some ThinkPads may have other levels, see
- * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
- *
- * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
- * does so, its initial value is meaningless (0x07).
- *
- * For firmware bugs, refer to:
- * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * ----
- *
- * ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
- * Main fan tachometer reading (in RPM)
- *
- * This register is present on all ThinkPads with a new-style EC, and
- * it is known not to be present on the A21m/e, and T22, as there is
- * something else in offset 0x84 according to the ACPI DSDT. Other
- * ThinkPads from this same time period (and earlier) probably lack the
- * tachometer as well.
- *
- * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
- * was never fixed by IBM to report the EC firmware version string
- * probably support the tachometer (like the early X models), so
- * detecting it is quite hard. We need more data to know for sure.
- *
- * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
- * might result.
- *
- * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
- * register is not invalidated in ThinkPads that disable tachometer
- * readings. Thus, the tachometer readings go stale.
- *
- * For firmware bugs, refer to:
- * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * IBMACPI_FAN_WR_ACPI_FANS:
- * ThinkPad X31, X40, X41. Not available in the X60.
- *
- * FANS ACPI handle: takes three arguments: low speed, medium speed,
- * high speed. ACPI DSDT seems to map these three speeds to levels
- * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
- * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
- *
- * The speeds are stored on handles
- * (FANA:FAN9), (FANC:FANB), (FANE:FAND).
- *
- * There are three default speed sets, acessible as handles:
- * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
- *
- * ACPI DSDT switches which set is in use depending on various
- * factors.
- *
- * IBMACPI_FAN_WR_TPEC is also available and should be used to
- * command the fan. The X31/X40/X41 seems to have 8 fan levels,
- * but the ACPI tables just mention level 7.
- */
-
-enum fan_status_access_mode {
- IBMACPI_FAN_NONE = 0, /* No fan status or control */
- IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
- IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
-};
-
-enum fan_control_access_mode {
- IBMACPI_FAN_WR_NONE = 0, /* No fan control */
- IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
- IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
- IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
-};
-
-enum fan_control_commands {
- IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
- IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
- IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
- * and also watchdog cmd */
-};
-
-enum { /* Fan control constants */
- fan_status_offset = 0x2f, /* EC register 0x2f */
- fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
- * 0x84 must be read before 0x85 */
-
- IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer
- * disengaged */
- IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan
- * control */
-};
-
-static char *ibm_thinkpad_ec_found = NULL;
-
-struct ibm_struct {
- char *name;
- char param[32];
-
- char *hid;
- struct acpi_driver *driver;
-
- int (*init) (void);
- int (*read) (char *);
- int (*write) (char *);
- void (*exit) (void);
-
- void (*notify) (struct ibm_struct *, u32);
- acpi_handle *handle;
- int type;
- struct acpi_device *device;
-
- int driver_registered;
- int proc_created;
- int init_called;
- int notify_installed;
-
- int experimental;
-};
-
-static struct proc_dir_entry *proc_dir = NULL;
-
-static struct backlight_device *ibm_backlight_device = NULL;
-
-#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
-#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
-
-static int acpi_evalf(acpi_handle handle,
- void *res, char *method, char *fmt, ...)
-{
- char *fmt0 = fmt;
- struct acpi_object_list params;
- union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
- struct acpi_buffer result, *resultp;
- union acpi_object out_obj;
- acpi_status status;
- va_list ap;
- char res_type;
- int success;
- int quiet;
-
- if (!*fmt) {
- printk(IBM_ERR "acpi_evalf() called with empty format\n");
- return 0;
- }
-
- if (*fmt == 'q') {
- quiet = 1;
- fmt++;
- } else
- quiet = 0;
-
- res_type = *(fmt++);
-
- params.count = 0;
- params.pointer = &in_objs[0];
-
- va_start(ap, fmt);
- while (*fmt) {
- char c = *(fmt++);
- switch (c) {
- case 'd': /* int */
- in_objs[params.count].integer.value = va_arg(ap, int);
- in_objs[params.count++].type = ACPI_TYPE_INTEGER;
- break;
- /* add more types as needed */
- default:
- printk(IBM_ERR "acpi_evalf() called "
- "with invalid format character '%c'\n", c);
- return 0;
- }
- }
- va_end(ap);
-
- if (res_type != 'v') {
- result.length = sizeof(out_obj);
- result.pointer = &out_obj;
- resultp = &result;
- } else
- resultp = NULL;
-
- status = acpi_evaluate_object(handle, method, &params, resultp);
-
- switch (res_type) {
- case 'd': /* int */
- if (res)
- *(int *)res = out_obj.integer.value;
- success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
- break;
- case 'v': /* void */
- success = status == AE_OK;
- break;
- /* add more types as needed */
- default:
- printk(IBM_ERR "acpi_evalf() called "
- "with invalid format character '%c'\n", res_type);
- return 0;
- }
-
- if (!success && !quiet)
- printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
- method, fmt0, status);
-
- return success;
-}
-
-static void __unused acpi_print_int(acpi_handle handle, char *method)
-{
- int i;
-
- if (acpi_evalf(handle, &i, method, "d"))
- printk(IBM_INFO "%s = 0x%x\n", method, i);
- else
- printk(IBM_ERR "error calling %s\n", method);
-}
-
-static char *next_cmd(char **cmds)
-{
- char *start = *cmds;
- char *end;
-
- while ((end = strchr(start, ',')) && end == start)
- start = end + 1;
-
- if (!end)
- return NULL;
-
- *end = 0;
- *cmds = end + 1;
- return start;
-}
-
-static int ibm_acpi_driver_init(void)
-{
- printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
- printk(IBM_INFO "%s\n", IBM_URL);
-
- if (ibm_thinkpad_ec_found)
- printk(IBM_INFO "ThinkPad EC firmware %s\n",
- ibm_thinkpad_ec_found);
-
- return 0;
-}
-
-static int driver_read(char *p)
-{
- int len = 0;
-
- len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
- len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
-
- return len;
-}
-
-static int hotkey_supported;
-static int hotkey_mask_supported;
-static int hotkey_orig_status;
-static int hotkey_orig_mask;
-
-static int hotkey_get(int *status, int *mask)
-{
- if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
- return 0;
-
- if (hotkey_mask_supported)
- if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
- return 0;
-
- return 1;
-}
-
-static int hotkey_set(int status, int mask)
-{
- int i;
-
- if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
- return 0;
-
- if (hotkey_mask_supported)
- for (i = 0; i < 32; i++) {
- int bit = ((1 << i) & mask) != 0;
- if (!acpi_evalf(hkey_handle,
- NULL, "MHKM", "vdd", i + 1, bit))
- return 0;
- }
-
- return 1;
-}
-
-static int hotkey_init(void)
-{
- /* hotkey not supported on 570 */
- hotkey_supported = hkey_handle != NULL;
-
- if (hotkey_supported) {
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24 */
- hotkey_mask_supported =
- acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
-
- if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int hotkey_read(char *p)
-{
- int status, mask;
- int len = 0;
-
- if (!hotkey_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
-
- if (!hotkey_get(&status, &mask))
- return -EIO;
-
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
- if (hotkey_mask_supported) {
- len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
- len += sprintf(p + len,
- "commands:\tenable, disable, reset, <mask>\n");
- } else {
- len += sprintf(p + len, "mask:\t\tnot supported\n");
- len += sprintf(p + len, "commands:\tenable, disable, reset\n");
- }
-
- return len;
-}
-
-static int hotkey_write(char *buf)
-{
- int status, mask;
- char *cmd;
- int do_cmd = 0;
-
- if (!hotkey_supported)
- return -ENODEV;
-
- if (!hotkey_get(&status, &mask))
- return -EIO;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status = 1;
- } else if (strlencmp(cmd, "disable") == 0) {
- status = 0;
- } else if (strlencmp(cmd, "reset") == 0) {
- status = hotkey_orig_status;
- mask = hotkey_orig_mask;
- } else if (sscanf(cmd, "0x%x", &mask) == 1) {
- /* mask set */
- } else if (sscanf(cmd, "%x", &mask) == 1) {
- /* mask set */
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !hotkey_set(status, mask))
- return -EIO;
-
- return 0;
-}
-
-static void hotkey_exit(void)
-{
- if (hotkey_supported)
- hotkey_set(hotkey_orig_status, hotkey_orig_mask);
-}
-
-static void hotkey_notify(struct ibm_struct *ibm, u32 event)
-{
- int hkey;
-
- if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
- acpi_bus_generate_event(ibm->device, event, hkey);
- else {
- printk(IBM_ERR "unknown hotkey event %d\n", event);
- acpi_bus_generate_event(ibm->device, event, 0);
- }
-}
-
-static int bluetooth_supported;
-
-static int bluetooth_init(void)
-{
- /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
- bluetooth_supported = hkey_handle &&
- acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
-
- return 0;
-}
-
-static int bluetooth_status(void)
-{
- int status;
-
- if (!bluetooth_supported ||
- !acpi_evalf(hkey_handle, &status, "GBDC", "d"))
- status = 0;
-
- return status;
-}
-
-static int bluetooth_read(char *p)
-{
- int len = 0;
- int status = bluetooth_status();
-
- if (!bluetooth_supported)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!(status & 1))
- len += sprintf(p + len, "status:\t\tnot installed\n");
- else {
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
- len += sprintf(p + len, "commands:\tenable, disable\n");
- }
-
- return len;
-}
-
-static int bluetooth_write(char *buf)
-{
- int status = bluetooth_status();
- char *cmd;
- int do_cmd = 0;
-
- if (!bluetooth_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status |= 2;
- } else if (strlencmp(cmd, "disable") == 0) {
- status &= ~2;
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
- return -EIO;
-
- return 0;
-}
-
-static int wan_supported;
-
-static int wan_init(void)
-{
- wan_supported = hkey_handle &&
- acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
-
- return 0;
-}
-
-static int wan_status(void)
-{
- int status;
-
- if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
- status = 0;
-
- return status;
-}
-
-static int wan_read(char *p)
-{
- int len = 0;
- int status = wan_status();
-
- if (!wan_supported)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!(status & 1))
- len += sprintf(p + len, "status:\t\tnot installed\n");
- else {
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
- len += sprintf(p + len, "commands:\tenable, disable\n");
- }
-
- return len;
-}
-
-static int wan_write(char *buf)
-{
- int status = wan_status();
- char *cmd;
- int do_cmd = 0;
-
- if (!wan_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status |= 2;
- } else if (strlencmp(cmd, "disable") == 0) {
- status &= ~2;
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
- return -EIO;
-
- return 0;
-}
-
-enum video_access_mode {
- IBMACPI_VIDEO_NONE = 0,
- IBMACPI_VIDEO_570, /* 570 */
- IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */
- IBMACPI_VIDEO_NEW, /* all others */
-};
-
-static enum video_access_mode video_supported;
-static int video_orig_autosw;
-
-static int video_init(void)
-{
- int ivga;
-
- if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
- /* G41, assume IVGA doesn't change */
- vid_handle = vid2_handle;
-
- if (!vid_handle)
- /* video switching not supported on R30, R31 */
- video_supported = IBMACPI_VIDEO_NONE;
- else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
- /* 570 */
- video_supported = IBMACPI_VIDEO_570;
- else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
- /* 600e/x, 770e, 770x */
- video_supported = IBMACPI_VIDEO_770;
- else
- /* all others */
- video_supported = IBMACPI_VIDEO_NEW;
-
- return 0;
-}
-
-static int video_status(void)
-{
- int status = 0;
- int i;
-
- if (video_supported == IBMACPI_VIDEO_570) {
- if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
- status = i & 3;
- } else if (video_supported == IBMACPI_VIDEO_770) {
- if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
- status |= 0x01 * i;
- if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
- status |= 0x02 * i;
- } else if (video_supported == IBMACPI_VIDEO_NEW) {
- acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
- if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
- status |= 0x02 * i;
-
- acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
- if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
- status |= 0x01 * i;
- if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
- status |= 0x08 * i;
- }
-
- return status;
-}
-
-static int video_autosw(void)
-{
- int autosw = 0;
-
- if (video_supported == IBMACPI_VIDEO_570)
- acpi_evalf(vid_handle, &autosw, "SWIT", "d");
- else if (video_supported == IBMACPI_VIDEO_770 ||
- video_supported == IBMACPI_VIDEO_NEW)
- acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
-
- return autosw & 1;
-}
-
-static int video_read(char *p)
-{
- int status = video_status();
- int autosw = video_autosw();
- int len = 0;
-
- if (!video_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
-
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
- len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
- if (video_supported == IBMACPI_VIDEO_NEW)
- len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
- len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
- len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
- len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
- if (video_supported == IBMACPI_VIDEO_NEW)
- len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
- len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
- len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
-
- return len;
-}
-
-static int video_switch(void)
-{
- int autosw = video_autosw();
- int ret;
-
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
- ret = video_supported == IBMACPI_VIDEO_570 ?
- acpi_evalf(ec_handle, NULL, "_Q16", "v") :
- acpi_evalf(vid_handle, NULL, "VSWT", "v");
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-
- return ret;
-}
-
-static int video_expand(void)
-{
- if (video_supported == IBMACPI_VIDEO_570)
- return acpi_evalf(ec_handle, NULL, "_Q17", "v");
- else if (video_supported == IBMACPI_VIDEO_770)
- return acpi_evalf(vid_handle, NULL, "VEXP", "v");
- else
- return acpi_evalf(NULL, NULL, "\\VEXP", "v");
-}
-
-static int video_switch2(int status)
-{
- int ret;
-
- if (video_supported == IBMACPI_VIDEO_570) {
- ret = acpi_evalf(NULL, NULL,
- "\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
- } else if (video_supported == IBMACPI_VIDEO_770) {
- int autosw = video_autosw();
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
-
- ret = acpi_evalf(vid_handle, NULL,
- "ASWT", "vdd", status * 0x100, 0);
-
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
- } else {
- ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
- acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
- }
-
- return ret;
-}
-
-static int video_write(char *buf)
-{
- char *cmd;
- int enable, disable, status;
-
- if (!video_supported)
- return -ENODEV;
-
- enable = disable = 0;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "lcd_enable") == 0) {
- enable |= 0x01;
- } else if (strlencmp(cmd, "lcd_disable") == 0) {
- disable |= 0x01;
- } else if (strlencmp(cmd, "crt_enable") == 0) {
- enable |= 0x02;
- } else if (strlencmp(cmd, "crt_disable") == 0) {
- disable |= 0x02;
- } else if (video_supported == IBMACPI_VIDEO_NEW &&
- strlencmp(cmd, "dvi_enable") == 0) {
- enable |= 0x08;
- } else if (video_supported == IBMACPI_VIDEO_NEW &&
- strlencmp(cmd, "dvi_disable") == 0) {
- disable |= 0x08;
- } else if (strlencmp(cmd, "auto_enable") == 0) {
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "auto_disable") == 0) {
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
- return -EIO;
- } else if (strlencmp(cmd, "video_switch") == 0) {
- if (!video_switch())
- return -EIO;
- } else if (strlencmp(cmd, "expand_toggle") == 0) {
- if (!video_expand())
- return -EIO;
- } else
- return -EINVAL;
- }
-
- if (enable || disable) {
- status = (video_status() & 0x0f & ~disable) | enable;
- if (!video_switch2(status))
- return -EIO;
- }
-
- return 0;
-}
-
-static void video_exit(void)
-{
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
-}
-
-static int light_supported;
-static int light_status_supported;
-
-static int light_init(void)
-{
- /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
- light_supported = (cmos_handle || lght_handle) && !ledb_handle;
-
- if (light_supported)
- /* light status not supported on
- 570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
- light_status_supported = acpi_evalf(ec_handle, NULL,
- "KBLT", "qv");
-
- return 0;
-}
-
-static int light_read(char *p)
-{
- int len = 0;
- int status = 0;
-
- if (!light_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- } else if (!light_status_supported) {
- len += sprintf(p + len, "status:\t\tunknown\n");
- len += sprintf(p + len, "commands:\ton, off\n");
- } else {
- if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
- return -EIO;
- len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
- len += sprintf(p + len, "commands:\ton, off\n");
- }
-
- return len;
-}
-
-static int light_write(char *buf)
-{
- int cmos_cmd, lght_cmd;
- char *cmd;
- int success;
-
- if (!light_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "on") == 0) {
- cmos_cmd = 0x0c;
- lght_cmd = 1;
- } else if (strlencmp(cmd, "off") == 0) {
- cmos_cmd = 0x0d;
- lght_cmd = 0;
- } else
- return -EINVAL;
-
- success = cmos_handle ?
- acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
- acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
- if (!success)
- return -EIO;
- }
-
- return 0;
-}
-
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
-static int _sta(acpi_handle handle)
-{
- int status;
-
- if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
- status = 0;
-
- return status;
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_DOCK
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int dock_read(char *p)
-{
- int len = 0;
- int docked = dock_docked();
-
- if (!dock_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!docked)
- len += sprintf(p + len, "status:\t\tundocked\n");
- else {
- len += sprintf(p + len, "status:\t\tdocked\n");
- len += sprintf(p + len, "commands:\tdock, undock\n");
- }
-
- return len;
-}
-
-static int dock_write(char *buf)
-{
- char *cmd;
-
- if (!dock_docked())
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "undock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
- !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "dock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
- int docked = dock_docked();
- int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
-
- if (event == 1 && !pci) /* 570 */
- acpi_bus_generate_event(ibm->device, event, 1); /* button */
- else if (event == 1 && pci) /* 570 */
- acpi_bus_generate_event(ibm->device, event, 3); /* dock */
- else if (event == 3 && docked)
- acpi_bus_generate_event(ibm->device, event, 1); /* button */
- else if (event == 3 && !docked)
- acpi_bus_generate_event(ibm->device, event, 2); /* undock */
- else if (event == 0 && docked)
- acpi_bus_generate_event(ibm->device, event, 3); /* dock */
- else {
- printk(IBM_ERR "unknown dock event %d, status %d\n",
- event, _sta(dock_handle));
- acpi_bus_generate_event(ibm->device, event, 0); /* unknown */
- }
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_BAY
-static int bay_status_supported;
-static int bay_status2_supported;
-static int bay_eject_supported;
-static int bay_eject2_supported;
-
-static int bay_init(void)
-{
- bay_status_supported = bay_handle &&
- acpi_evalf(bay_handle, NULL, "_STA", "qv");
- bay_status2_supported = bay2_handle &&
- acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
- bay_eject_supported = bay_handle && bay_ej_handle &&
- (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
- bay_eject2_supported = bay2_handle && bay2_ej_handle &&
- (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
- return 0;
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
- int len = 0;
- int occupied = bay_occupied(bay);
- int occupied2 = bay_occupied(bay2);
- int eject, eject2;
-
- len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
- (occupied ? "occupied" : "unoccupied") :
- "not supported");
- if (bay_status2_supported)
- len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
- "occupied" : "unoccupied");
-
- eject = bay_eject_supported && occupied;
- eject2 = bay_eject2_supported && occupied2;
-
- if (eject && eject2)
- len += sprintf(p + len, "commands:\teject, eject2\n");
- else if (eject)
- len += sprintf(p + len, "commands:\teject\n");
- else if (eject2)
- len += sprintf(p + len, "commands:\teject2\n");
-
- return len;
-}
-
-static int bay_write(char *buf)
-{
- char *cmd;
-
- if (!bay_eject_supported && !bay_eject2_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
- if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else if (bay_eject2_supported &&
- strlencmp(cmd, "eject2") == 0) {
- if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
- acpi_bus_generate_event(ibm->device, event, 0);
-}
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-static int cmos_read(char *p)
-{
- int len = 0;
-
- /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- R30, R31, T20-22, X20-21 */
- if (!cmos_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
- }
-
- return len;
-}
-
-static int cmos_eval(int cmos_cmd)
-{
- if (cmos_handle)
- return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
- else
- return 1;
-}
-
-static int cmos_write(char *buf)
-{
- char *cmd;
- int cmos_cmd;
-
- if (!cmos_handle)
- return -EINVAL;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
- cmos_cmd >= 0 && cmos_cmd <= 21) {
- /* cmos_cmd set */
- } else
- return -EINVAL;
-
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- }
-
- return 0;
-}
-
-enum led_access_mode {
- IBMACPI_LED_NONE = 0,
- IBMACPI_LED_570, /* 570 */
- IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- IBMACPI_LED_NEW, /* all others */
-};
-static enum led_access_mode led_supported;
-
-static int led_init(void)
-{
- if (!led_handle)
- /* led not supported on R30, R31 */
- led_supported = IBMACPI_LED_NONE;
- else if (strlencmp(led_path, "SLED") == 0)
- /* 570 */
- led_supported = IBMACPI_LED_570;
- else if (strlencmp(led_path, "SYSL") == 0)
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- led_supported = IBMACPI_LED_OLD;
- else
- /* all others */
- led_supported = IBMACPI_LED_NEW;
-
- return 0;
-}
-
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
-
-static int led_read(char *p)
-{
- int len = 0;
-
- if (!led_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
- len += sprintf(p + len, "status:\t\tsupported\n");
-
- if (led_supported == IBMACPI_LED_570) {
- /* 570 */
- int i, status;
- for (i = 0; i < 8; i++) {
- if (!acpi_evalf(ec_handle,
- &status, "GLED", "dd", 1 << i))
- return -EIO;
- len += sprintf(p + len, "%d:\t\t%s\n",
- i, led_status(status));
- }
- }
-
- len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
-
- return len;
-}
-
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
-#define EC_HLCL 0x0c
-#define EC_HLBL 0x0d
-#define EC_HLMS 0x0e
-
-static int led_write(char *buf)
-{
- char *cmd;
- int led, ind, ret;
-
- if (!led_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
- return -EINVAL;
-
- if (strstr(cmd, "off")) {
- ind = 0;
- } else if (strstr(cmd, "on")) {
- ind = 1;
- } else if (strstr(cmd, "blink")) {
- ind = 2;
- } else
- return -EINVAL;
-
- if (led_supported == IBMACPI_LED_570) {
- /* 570 */
- led = 1 << led;
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_sled_arg1[ind]))
- return -EIO;
- } else if (led_supported == IBMACPI_LED_OLD) {
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
- led = 1 << led;
- ret = ec_write(EC_HLMS, led);
- if (ret >= 0)
- ret =
- ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
- if (ret >= 0)
- ret =
- ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
- if (ret < 0)
- return ret;
- } else {
- /* all others */
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_led_arg1[ind]))
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static int beep_read(char *p)
-{
- int len = 0;
-
- if (!beep_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
- }
-
- return len;
-}
-
-static int beep_write(char *buf)
-{
- char *cmd;
- int beep_cmd;
-
- if (!beep_handle)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
- beep_cmd >= 0 && beep_cmd <= 17) {
- /* beep_cmd set */
- } else
- return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
- }
-
- return 0;
-}
-
-static int acpi_ec_read(int i, u8 * p)
-{
- int v;
-
- if (ecrd_handle) {
- if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
- return 0;
- *p = v;
- } else {
- if (ec_read(i, p) < 0)
- return 0;
- }
-
- return 1;
-}
-
-static int acpi_ec_write(int i, u8 v)
-{
- if (ecwr_handle) {
- if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
- return 0;
- } else {
- if (ec_write(i, v) < 0)
- return 0;
- }
-
- return 1;
-}
-
-static enum thermal_access_mode thermal_read_mode;
-
-static int thermal_init(void)
-{
- u8 t, ta1, ta2;
- int i;
- int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
- if (ibm_thinkpad_ec_found && experimental) {
- /*
- * Direct EC access mode: sensors at registers
- * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
- * non-implemented, thermal sensors return 0x80 when
- * not available
- */
-
- ta1 = ta2 = 0;
- for (i = 0; i < 8; i++) {
- if (likely(acpi_ec_read(0x78 + i, &t))) {
- ta1 |= t;
- } else {
- ta1 = 0;
- break;
- }
- if (likely(acpi_ec_read(0xC0 + i, &t))) {
- ta2 |= t;
- } else {
- ta1 = 0;
- break;
- }
- }
- if (ta1 == 0) {
- /* This is sheer paranoia, but we handle it anyway */
- if (acpi_tmp7) {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "falling back to ACPI TMPx access mode\n");
- thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
- } else {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "disabling thermal sensors access\n");
- thermal_read_mode = IBMACPI_THERMAL_NONE;
- }
- } else {
- thermal_read_mode =
- (ta2 != 0) ?
- IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
- }
- } else if (acpi_tmp7) {
- if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
- /* 600e/x, 770e, 770x */
- thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
- } else {
- /* Standard ACPI TMPx access, max 8 sensors */
- thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
- }
- } else {
- /* temperatures not supported on 570, G4x, R30, R31, R32 */
- thermal_read_mode = IBMACPI_THERMAL_NONE;
- }
-
- return 0;
-}
-
-static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
-{
- int i, t;
- s8 tmp;
- char tmpi[] = "TMPi";
-
- if (!s)
- return -EINVAL;
-
- switch (thermal_read_mode) {
-#if IBMACPI_MAX_THERMAL_SENSORS >= 16
- case IBMACPI_THERMAL_TPEC_16:
- for (i = 0; i < 8; i++) {
- if (!acpi_ec_read(0xC0 + i, &tmp))
- return -EIO;
- s->temp[i + 8] = tmp * 1000;
- }
- /* fallthrough */
-#endif
- case IBMACPI_THERMAL_TPEC_8:
- for (i = 0; i < 8; i++) {
- if (!acpi_ec_read(0x78 + i, &tmp))
- return -EIO;
- s->temp[i] = tmp * 1000;
- }
- return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
-
- case IBMACPI_THERMAL_ACPI_UPDT:
- if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
- return -EIO;
- for (i = 0; i < 8; i++) {
- tmpi[3] = '0' + i;
- if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
- return -EIO;
- s->temp[i] = (t - 2732) * 100;
- }
- return 8;
-
- case IBMACPI_THERMAL_ACPI_TMP07:
- for (i = 0; i < 8; i++) {
- tmpi[3] = '0' + i;
- if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
- return -EIO;
- s->temp[i] = t * 1000;
- }
- return 8;
-
- case IBMACPI_THERMAL_NONE:
- default:
- return 0;
- }
-}
-
-static int thermal_read(char *p)
-{
- int len = 0;
- int n, i;
- struct ibm_thermal_sensors_struct t;
-
- n = thermal_get_sensors(&t);
- if (unlikely(n < 0))
- return n;
-
- len += sprintf(p + len, "temperatures:\t");
-
- if (n > 0) {
- for (i = 0; i < (n - 1); i++)
- len += sprintf(p + len, "%d ", t.temp[i] / 1000);
- len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
- } else
- len += sprintf(p + len, "not supported\n");
-
- return len;
-}
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(char *p)
-{
- int len = 0;
- int i, j;
- u8 v;
-
- len += sprintf(p + len, "EC "
- " +00 +01 +02 +03 +04 +05 +06 +07"
- " +08 +09 +0a +0b +0c +0d +0e +0f\n");
- for (i = 0; i < 256; i += 16) {
- len += sprintf(p + len, "EC 0x%02x:", i);
- for (j = 0; j < 16; j++) {
- if (!acpi_ec_read(i + j, &v))
- break;
- if (v != ecdump_regs[i + j])
- len += sprintf(p + len, " *%02x", v);
- else
- len += sprintf(p + len, " %02x", v);
- ecdump_regs[i + j] = v;
- }
- len += sprintf(p + len, "\n");
- if (j != 16)
- break;
- }
-
- /* These are way too dangerous to advertise openly... */
-#if 0
- len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
- " (<offset> is 00-ff, <value> is 00-ff)\n");
- len += sprintf(p + len, "commands:\t0x<offset> <value> "
- " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
- return len;
-}
-
-static int ecdump_write(char *buf)
-{
- char *cmd;
- int i, v;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
- /* i and v set */
- } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
- /* i and v set */
- } else
- return -EINVAL;
- if (i >= 0 && i < 256 && v >= 0 && v < 256) {
- if (!acpi_ec_write(i, v))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int brightness_offset = 0x31;
-
-static int brightness_get(struct backlight_device *bd)
-{
- u8 level;
- if (!acpi_ec_read(brightness_offset, &level))
- return -EIO;
-
- level &= 0x7;
-
- return level;
-}
-
-static int brightness_read(char *p)
-{
- int len = 0;
- int level;
-
- if ((level = brightness_get(NULL)) < 0) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
- } else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
- len += sprintf(p + len, "commands:\tup, down\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-7)\n");
- }
-
- return len;
-}
-
-#define BRIGHTNESS_UP 4
-#define BRIGHTNESS_DOWN 5
-
-static int brightness_set(int value)
-{
- int cmos_cmd, inc, i;
- int current_value = brightness_get(NULL);
-
- value &= 7;
-
- cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
- inc = value > current_value ? 1 : -1;
- for (i = current_value; i != value; i += inc) {
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- if (!acpi_ec_write(brightness_offset, i + inc))
- return -EIO;
- }
-
- return 0;
-}
-
-static int brightness_write(char *buf)
-{
- int level;
- int new_level;
- char *cmd;
-
- while ((cmd = next_cmd(&buf))) {
- if ((level = brightness_get(NULL)) < 0)
- return level;
- level &= 7;
-
- if (strlencmp(cmd, "up") == 0) {
- new_level = level == 7 ? 7 : level + 1;
- } else if (strlencmp(cmd, "down") == 0) {
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 7) {
- /* new_level set */
- } else
- return -EINVAL;
-
- brightness_set(new_level);
- }
-
- return 0;
-}
-
-static int brightness_update_status(struct backlight_device *bd)
-{
- return brightness_set(
- (bd->props.fb_blank == FB_BLANK_UNBLANK &&
- bd->props.power == FB_BLANK_UNBLANK) ?
- bd->props.brightness : 0);
-}
-
-static struct backlight_ops ibm_backlight_data = {
- .get_brightness = brightness_get,
- .update_status = brightness_update_status,
-};
-
-static int brightness_init(void)
-{
- int b;
-
- b = brightness_get(NULL);
- if (b < 0)
- return b;
-
- ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
- &ibm_backlight_data);
- if (IS_ERR(ibm_backlight_device)) {
- printk(IBM_ERR "Could not register backlight device\n");
- return PTR_ERR(ibm_backlight_device);
- }
-
- ibm_backlight_device->props.max_brightness = 7;
- ibm_backlight_device->props.brightness = b;
- backlight_update_status(ibm_backlight_device);
-
- return 0;
-}
-
-static void brightness_exit(void)
-{
- if (ibm_backlight_device) {
- backlight_device_unregister(ibm_backlight_device);
- ibm_backlight_device = NULL;
- }
-}
-
-static int volume_offset = 0x30;
-
-static int volume_read(char *p)
-{
- int len = 0;
- u8 level;
-
- if (!acpi_ec_read(volume_offset, &level)) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
- } else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
- len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
- len += sprintf(p + len, "commands:\tup, down, mute\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-15)\n");
- }
-
- return len;
-}
-
-#define VOLUME_DOWN 0
-#define VOLUME_UP 1
-#define VOLUME_MUTE 2
-
-static int volume_write(char *buf)
-{
- int cmos_cmd, inc, i;
- u8 level, mute;
- int new_level, new_mute;
- char *cmd;
-
- while ((cmd = next_cmd(&buf))) {
- if (!acpi_ec_read(volume_offset, &level))
- return -EIO;
- new_mute = mute = level & 0x40;
- new_level = level = level & 0xf;
-
- if (strlencmp(cmd, "up") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 15 ? 15 : level + 1;
- } else if (strlencmp(cmd, "down") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 15) {
- /* new_level set */
- } else if (strlencmp(cmd, "mute") == 0) {
- new_mute = 0x40;
- } else
- return -EINVAL;
-
- if (new_level != level) { /* mute doesn't change */
- cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
- inc = new_level > level ? 1 : -1;
-
- if (mute && (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level)))
- return -EIO;
-
- for (i = level; i != new_level; i += inc)
- if (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, i + inc))
- return -EIO;
-
- if (mute && (!cmos_eval(VOLUME_MUTE) ||
- !acpi_ec_write(volume_offset,
- new_level + mute)))
- return -EIO;
- }
-
- if (new_mute != mute) { /* level doesn't change */
- cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
-
- if (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level + new_mute))
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static enum fan_status_access_mode fan_status_access_mode;
-static enum fan_control_access_mode fan_control_access_mode;
-static enum fan_control_commands fan_control_commands;
-
-static int fan_control_status_known;
-static u8 fan_control_initial_status;
-
-static void fan_watchdog_fire(struct work_struct *ignored);
-static int fan_watchdog_maxinterval;
-static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
-
-static int fan_init(void)
-{
- fan_status_access_mode = IBMACPI_FAN_NONE;
- fan_control_access_mode = IBMACPI_FAN_WR_NONE;
- fan_control_commands = 0;
- fan_control_status_known = 1;
- fan_watchdog_maxinterval = 0;
-
- if (gfan_handle) {
- /* 570, 600e/x, 770e, 770x */
- fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
- } else {
- /* all other ThinkPads: note that even old-style
- * ThinkPad ECs supports the fan control register */
- if (likely(acpi_ec_read(fan_status_offset,
- &fan_control_initial_status))) {
- fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
-
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the fan status, and it ends up
- * being set to 0x07 when it *could* be either
- * 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
- if (fan_control_initial_status == 0x07 &&
- ibm_thinkpad_ec_found &&
- ((ibm_thinkpad_ec_found[0] == '1' &&
- ibm_thinkpad_ec_found[1] == 'Y') ||
- (ibm_thinkpad_ec_found[0] == '7' &&
- (ibm_thinkpad_ec_found[1] == '6' ||
- ibm_thinkpad_ec_found[1] == '8' ||
- ibm_thinkpad_ec_found[1] == '0'))
- )) {
- printk(IBM_NOTICE
- "fan_init: initial fan status is "
- "unknown, assuming it is in auto "
- "mode\n");
- fan_control_status_known = 0;
- }
- } else {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "fan status and control unavailable\n");
- return 0;
- }
- }
-
- if (sfan_handle) {
- /* 570, 770x-JL */
- fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
- fan_control_commands |=
- IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
- } else {
- if (!gfan_handle) {
- /* gfan without sfan means no fan control */
- /* all other models implement TP EC 0x2f control */
-
- if (fans_handle) {
- /* X31, X40, X41 */
- fan_control_access_mode =
- IBMACPI_FAN_WR_ACPI_FANS;
- fan_control_commands |=
- IBMACPI_FAN_CMD_SPEED |
- IBMACPI_FAN_CMD_LEVEL |
- IBMACPI_FAN_CMD_ENABLE;
- } else {
- fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
- fan_control_commands |=
- IBMACPI_FAN_CMD_LEVEL |
- IBMACPI_FAN_CMD_ENABLE;
- }
- }
- }
-
- return 0;
-}
-
-static int fan_get_status(u8 *status)
-{
- u8 s;
-
- /* TODO:
- * Add IBMACPI_FAN_RD_ACPI_FANS ? */
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_ACPI_GFAN:
- /* 570, 600e/x, 770e, 770x */
-
- if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
- return -EIO;
-
- if (likely(status))
- *status = s & 0x07;
-
- break;
-
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
- return -EIO;
-
- if (likely(status))
- *status = s;
-
- break;
-
- default:
- return -ENXIO;
- }
-
- return 0;
-}
-
-static int fan_get_speed(unsigned int *speed)
-{
- u8 hi, lo;
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
- !acpi_ec_read(fan_rpm_offset + 1, &hi)))
- return -EIO;
-
- if (likely(speed))
- *speed = (hi << 8) | lo;
-
- break;
-
- default:
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void fan_exit(void)
-{
- cancel_delayed_work(&fan_watchdog_task);
- flush_scheduled_work();
-}
-
-static void fan_watchdog_reset(void)
-{
- static int fan_watchdog_active = 0;
-
- if (fan_watchdog_active)
- cancel_delayed_work(&fan_watchdog_task);
-
- if (fan_watchdog_maxinterval > 0) {
- fan_watchdog_active = 1;
- if (!schedule_delayed_work(&fan_watchdog_task,
- msecs_to_jiffies(fan_watchdog_maxinterval
- * 1000))) {
- printk(IBM_ERR "failed to schedule the fan watchdog, "
- "watchdog will not trigger\n");
- }
- } else
- fan_watchdog_active = 0;
-}
-
-static int fan_read(char *p)
-{
- int len = 0;
- int rc;
- u8 status;
- unsigned int speed = 0;
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_ACPI_GFAN:
- /* 570, 600e/x, 770e, 770x */
- if ((rc = fan_get_status(&status)) < 0)
- return rc;
-
- len += sprintf(p + len, "status:\t\t%s\n"
- "level:\t\t%d\n",
- (status != 0) ? "enabled" : "disabled", status);
- break;
-
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if ((rc = fan_get_status(&status)) < 0)
- return rc;
-
- if (unlikely(!fan_control_status_known)) {
- if (status != fan_control_initial_status)
- fan_control_status_known = 1;
- else
- /* Return most likely status. In fact, it
- * might be the only possible status */
- status = IBMACPI_FAN_EC_AUTO;
- }
-
- len += sprintf(p + len, "status:\t\t%s\n",
- (status != 0) ? "enabled" : "disabled");
-
- /* No ThinkPad boots on disengaged mode, we can safely
- * assume the tachometer is online if fan control status
- * was unknown */
- if ((rc = fan_get_speed(&speed)) < 0)
- return rc;
-
- len += sprintf(p + len, "speed:\t\t%d\n", speed);
-
- if (status & IBMACPI_FAN_EC_DISENGAGED)
- /* Disengaged mode takes precedence */
- len += sprintf(p + len, "level:\t\tdisengaged\n");
- else if (status & IBMACPI_FAN_EC_AUTO)
- len += sprintf(p + len, "level:\t\tauto\n");
- else
- len += sprintf(p + len, "level:\t\t%d\n", status);
- break;
-
- case IBMACPI_FAN_NONE:
- default:
- len += sprintf(p + len, "status:\t\tnot supported\n");
- }
-
- if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
- len += sprintf(p + len, "commands:\tlevel <level>");
-
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_SFAN:
- len += sprintf(p + len, " (<level> is 0-7)\n");
- break;
-
- default:
- len += sprintf(p + len, " (<level> is 0-7, "
- "auto, disengaged)\n");
- break;
- }
- }
-
- if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
- len += sprintf(p + len, "commands:\tenable, disable\n"
- "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
- "1-120 (seconds))\n");
-
- if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
- len += sprintf(p + len, "commands:\tspeed <speed>"
- " (<speed> is 0-65535)\n");
-
- return len;
-}
-
-static int fan_set_level(int level)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if (level >= 0 && level <= 7) {
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
- return -EIO;
- } else
- return -EINVAL;
- break;
-
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if ((level != IBMACPI_FAN_EC_AUTO) &&
- (level != IBMACPI_FAN_EC_DISENGAGED) &&
- ((level < 0) || (level > 7)))
- return -EINVAL;
-
- if (!acpi_ec_write(fan_status_offset, level))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_enable(void)
-{
- u8 s;
- int rc;
-
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if ((rc = fan_get_status(&s)) < 0)
- return rc;
-
- /* Don't go out of emergency fan mode */
- if (s != 7)
- s = IBMACPI_FAN_EC_AUTO;
-
- if (!acpi_ec_write(fan_status_offset, s))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if ((rc = fan_get_status(&s)) < 0)
- return rc;
-
- s &= 0x07;
-
- /* Set fan to at least level 4 */
- if (s < 4)
- s = 4;
-
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
- return -EIO;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_disable(void)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if (!acpi_ec_write(fan_status_offset, 0x00))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
- return -EIO;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_speed(int speed)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- if (speed >= 0 && speed <= 65535) {
- if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
- speed, speed, speed))
- return -EIO;
- } else
- return -EINVAL;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_write_cmd_level(const char *cmd, int *rc)
-{
- int level;
-
- if (strlencmp(cmd, "level auto") == 0)
- level = IBMACPI_FAN_EC_AUTO;
- else if (strlencmp(cmd, "level disengaged") == 0)
- level = IBMACPI_FAN_EC_DISENGAGED;
- else if (sscanf(cmd, "level %d", &level) != 1)
- return 0;
-
- if ((*rc = fan_set_level(level)) == -ENXIO)
- printk(IBM_ERR "level command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_enable(const char *cmd, int *rc)
-{
- if (strlencmp(cmd, "enable") != 0)
- return 0;
-
- if ((*rc = fan_set_enable()) == -ENXIO)
- printk(IBM_ERR "enable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_disable(const char *cmd, int *rc)
-{
- if (strlencmp(cmd, "disable") != 0)
- return 0;
-
- if ((*rc = fan_set_disable()) == -ENXIO)
- printk(IBM_ERR "disable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_speed(const char *cmd, int *rc)
-{
- int speed;
-
- /* TODO:
- * Support speed <low> <medium> <high> ? */
-
- if (sscanf(cmd, "speed %d", &speed) != 1)
- return 0;
-
- if ((*rc = fan_set_speed(speed)) == -ENXIO)
- printk(IBM_ERR "speed command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_watchdog(const char *cmd, int *rc)
-{
- int interval;
-
- if (sscanf(cmd, "watchdog %d", &interval) != 1)
- return 0;
-
- if (interval < 0 || interval > 120)
- *rc = -EINVAL;
- else
- fan_watchdog_maxinterval = interval;
-
- return 1;
-}
-
-static int fan_write(char *buf)
-{
- char *cmd;
- int rc = 0;
-
- while (!rc && (cmd = next_cmd(&buf))) {
- if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
- fan_write_cmd_level(cmd, &rc)) &&
- !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
- (fan_write_cmd_enable(cmd, &rc) ||
- fan_write_cmd_disable(cmd, &rc) ||
- fan_write_cmd_watchdog(cmd, &rc))) &&
- !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
- fan_write_cmd_speed(cmd, &rc))
- )
- rc = -EINVAL;
- else if (!rc)
- fan_watchdog_reset();
- }
-
- return rc;
-}
-
-static void fan_watchdog_fire(struct work_struct *ignored)
-{
- printk(IBM_NOTICE "fan watchdog: enabling fan\n");
- if (fan_set_enable()) {
- printk(IBM_ERR "fan watchdog: error while enabling fan\n");
- /* reschedule for later */
- fan_watchdog_reset();
- }
-}
-
-static struct ibm_struct ibms[] = {
- {
- .name = "driver",
- .init = ibm_acpi_driver_init,
- .read = driver_read,
- },
- {
- .name = "hotkey",
- .hid = IBM_HKEY_HID,
- .init = hotkey_init,
- .read = hotkey_read,
- .write = hotkey_write,
- .exit = hotkey_exit,
- .notify = hotkey_notify,
- .handle = &hkey_handle,
- .type = ACPI_DEVICE_NOTIFY,
- },
- {
- .name = "bluetooth",
- .init = bluetooth_init,
- .read = bluetooth_read,
- .write = bluetooth_write,
- },
- {
- .name = "wan",
- .init = wan_init,
- .read = wan_read,
- .write = wan_write,
- .experimental = 1,
- },
- {
- .name = "video",
- .init = video_init,
- .read = video_read,
- .write = video_write,
- .exit = video_exit,
- },
- {
- .name = "light",
- .init = light_init,
- .read = light_read,
- .write = light_write,
- },
-#ifdef CONFIG_ACPI_IBM_DOCK
- {
- .name = "dock",
- .read = dock_read,
- .write = dock_write,
- .notify = dock_notify,
- .handle = &dock_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
- {
- .name = "dock",
- .hid = IBM_PCI_HID,
- .notify = dock_notify,
- .handle = &pci_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
- {
- .name = "bay",
- .init = bay_init,
- .read = bay_read,
- .write = bay_write,
- .notify = bay_notify,
- .handle = &bay_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-#endif /* CONFIG_ACPI_IBM_BAY */
- {
- .name = "cmos",
- .read = cmos_read,
- .write = cmos_write,
- },
- {
- .name = "led",
- .init = led_init,
- .read = led_read,
- .write = led_write,
- },
- {
- .name = "beep",
- .read = beep_read,
- .write = beep_write,
- },
- {
- .name = "thermal",
- .init = thermal_init,
- .read = thermal_read,
- },
- {
- .name = "ecdump",
- .read = ecdump_read,
- .write = ecdump_write,
- .experimental = 1,
- },
- {
- .name = "brightness",
- .read = brightness_read,
- .write = brightness_write,
- .init = brightness_init,
- .exit = brightness_exit,
- },
- {
- .name = "volume",
- .read = volume_read,
- .write = volume_write,
- },
- {
- .name = "fan",
- .read = fan_read,
- .write = fan_write,
- .init = fan_init,
- .exit = fan_exit,
- .experimental = 1,
- },
-};
-
-static int dispatch_read(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct ibm_struct *ibm = data;
- int len;
-
- if (!ibm || !ibm->read)
- return -EINVAL;
-
- len = ibm->read(page);
- if (len < 0)
- return len;
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
-}
-
-static int dispatch_write(struct file *file, const char __user * userbuf,
- unsigned long count, void *data)
-{
- struct ibm_struct *ibm = data;
- char *kernbuf;
- int ret;
-
- if (!ibm || !ibm->write)
- return -EINVAL;
-
- kernbuf = kmalloc(count + 2, GFP_KERNEL);
- if (!kernbuf)
- return -ENOMEM;
-
- if (copy_from_user(kernbuf, userbuf, count)) {
- kfree(kernbuf);
- return -EFAULT;
- }
-
- kernbuf[count] = 0;
- strcat(kernbuf, ",");
- ret = ibm->write(kernbuf);
- if (ret == 0)
- ret = count;
-
- kfree(kernbuf);
-
- return ret;
-}
-
-static void dispatch_notify(acpi_handle handle, u32 event, void *data)
-{
- struct ibm_struct *ibm = data;
-
- if (!ibm || !ibm->notify)
- return;
-
- ibm->notify(ibm, event);
-}
-
-static int __init setup_notify(struct ibm_struct *ibm)
-{
- acpi_status status;
- int ret;
-
- if (!*ibm->handle)
- return 0;
-
- ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
- if (ret < 0) {
- printk(IBM_ERR "%s device not present\n", ibm->name);
- return -ENODEV;
- }
-
- acpi_driver_data(ibm->device) = ibm;
- sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
-
- status = acpi_install_notify_handler(*ibm->handle, ibm->type,
- dispatch_notify, ibm);
- if (ACPI_FAILURE(status)) {
- if (status == AE_ALREADY_EXISTS) {
- printk(IBM_NOTICE "another device driver is already handling %s events\n",
- ibm->name);
- } else {
- printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
- ibm->name, status);
- }
- return -ENODEV;
- }
- ibm->notify_installed = 1;
- return 0;
-}
-
-static int __init ibm_device_add(struct acpi_device *device)
-{
- return 0;
-}
-
-static int __init register_driver(struct ibm_struct *ibm)
-{
- int ret;
-
- ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
- if (!ibm->driver) {
- printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
- return -1;
- }
-
- sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
- ibm->driver->ids = ibm->hid;
- ibm->driver->ops.add = &ibm_device_add;
-
- ret = acpi_bus_register_driver(ibm->driver);
- if (ret < 0) {
- printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
- ibm->hid, ret);
- kfree(ibm->driver);
- }
-
- return ret;
-}
-
-static void ibm_exit(struct ibm_struct *ibm);
-
-static int __init ibm_init(struct ibm_struct *ibm)
-{
- int ret;
- struct proc_dir_entry *entry;
-
- if (ibm->experimental && !experimental)
- return 0;
-
- if (ibm->hid) {
- ret = register_driver(ibm);
- if (ret < 0)
- return ret;
- ibm->driver_registered = 1;
- }
-
- if (ibm->init) {
- ret = ibm->init();
- if (ret != 0)
- return ret;
- ibm->init_called = 1;
- }
-
- if (ibm->read) {
- entry = create_proc_entry(ibm->name,
- S_IFREG | S_IRUGO | S_IWUSR,
- proc_dir);
- if (!entry) {
- printk(IBM_ERR "unable to create proc entry %s\n",
- ibm->name);
- return -ENODEV;
- }
- entry->owner = THIS_MODULE;
- entry->data = ibm;
- entry->read_proc = &dispatch_read;
- if (ibm->write)
- entry->write_proc = &dispatch_write;
- ibm->proc_created = 1;
- }
-
- if (ibm->notify) {
- ret = setup_notify(ibm);
- if (ret == -ENODEV) {
- printk(IBM_NOTICE "disabling subdriver %s\n",
- ibm->name);
- ibm_exit(ibm);
- return 0;
- }
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static void ibm_exit(struct ibm_struct *ibm)
-{
- if (ibm->notify_installed)
- acpi_remove_notify_handler(*ibm->handle, ibm->type,
- dispatch_notify);
-
- if (ibm->proc_created)
- remove_proc_entry(ibm->name, proc_dir);
-
- if (ibm->init_called && ibm->exit)
- ibm->exit();
-
- if (ibm->driver_registered) {
- acpi_bus_unregister_driver(ibm->driver);
- kfree(ibm->driver);
- }
-}
-
-static void __init ibm_handle_init(char *name,
- acpi_handle * handle, acpi_handle parent,
- char **paths, int num_paths, char **path)
-{
- int i;
- acpi_status status;
-
- for (i = 0; i < num_paths; i++) {
- status = acpi_get_handle(parent, paths[i], handle);
- if (ACPI_SUCCESS(status)) {
- *path = paths[i];
- return;
- }
- }
-
- *handle = NULL;
-}
-
-#define IBM_HANDLE_INIT(object) \
- ibm_handle_init(#object, &object##_handle, *object##_parent, \
- object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-
-static int __init set_ibm_param(const char *val, struct kernel_param *kp)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(ibms); i++)
- if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
- if (strlen(val) > sizeof(ibms[i].param) - 2)
- return -ENOSPC;
- strcpy(ibms[i].param, val);
- strcat(ibms[i].param, ",");
- return 0;
- }
-
- return -EINVAL;
-}
-
-#define IBM_PARAM(feature) \
- module_param_call(feature, set_ibm_param, NULL, NULL, 0)
-
-IBM_PARAM(hotkey);
-IBM_PARAM(bluetooth);
-IBM_PARAM(video);
-IBM_PARAM(light);
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_PARAM(dock);
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_PARAM(bay);
-#endif /* CONFIG_ACPI_IBM_BAY */
-IBM_PARAM(cmos);
-IBM_PARAM(led);
-IBM_PARAM(beep);
-IBM_PARAM(ecdump);
-IBM_PARAM(brightness);
-IBM_PARAM(volume);
-IBM_PARAM(fan);
-
-static void acpi_ibm_exit(void)
-{
- int i;
-
- for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
- ibm_exit(&ibms[i]);
-
- if (proc_dir)
- remove_proc_entry(IBM_DIR, acpi_root_dir);
-
- if (ibm_thinkpad_ec_found)
- kfree(ibm_thinkpad_ec_found);
-}
-
-static char* __init check_dmi_for_ec(void)
-{
- struct dmi_device *dev = NULL;
- char ec_fw_string[18];
-
- /*
- * ThinkPad T23 or newer, A31 or newer, R50e or newer,
- * X32 or newer, all Z series; Some models must have an
- * up-to-date BIOS or they will not be detected.
- *
- * See http://thinkwiki.org/wiki/List_of_DMI_IDs
- */
- while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
- if (sscanf(dev->name,
- "IBM ThinkPad Embedded Controller -[%17c",
- ec_fw_string) == 1) {
- ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
- ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
- return kstrdup(ec_fw_string, GFP_KERNEL);
- }
- }
- return NULL;
-}
-
-static int __init acpi_ibm_init(void)
-{
- int ret, i;
-
- if (acpi_disabled)
- return -ENODEV;
-
- /* ec is required because many other handles are relative to it */
- IBM_HANDLE_INIT(ec);
- if (!ec_handle) {
- printk(IBM_ERR "ec object not found\n");
- return -ENODEV;
- }
-
- /* Models with newer firmware report the EC in DMI */
- ibm_thinkpad_ec_found = check_dmi_for_ec();
-
- /* these handles are not required */
- IBM_HANDLE_INIT(vid);
- IBM_HANDLE_INIT(vid2);
- IBM_HANDLE_INIT(ledb);
- IBM_HANDLE_INIT(led);
- IBM_HANDLE_INIT(hkey);
- IBM_HANDLE_INIT(lght);
- IBM_HANDLE_INIT(cmos);
-#ifdef CONFIG_ACPI_IBM_DOCK
- IBM_HANDLE_INIT(dock);
-#endif
- IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
- IBM_HANDLE_INIT(bay);
- if (bay_handle)
- IBM_HANDLE_INIT(bay_ej);
- IBM_HANDLE_INIT(bay2);
- if (bay2_handle)
- IBM_HANDLE_INIT(bay2_ej);
-#endif /* CONFIG_ACPI_IBM_BAY */
- IBM_HANDLE_INIT(beep);
- IBM_HANDLE_INIT(ecrd);
- IBM_HANDLE_INIT(ecwr);
- IBM_HANDLE_INIT(fans);
- IBM_HANDLE_INIT(gfan);
- IBM_HANDLE_INIT(sfan);
-
- proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
- if (!proc_dir) {
- printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
- acpi_ibm_exit();
- return -ENODEV;
- }
- proc_dir->owner = THIS_MODULE;
-
- for (i = 0; i < ARRAY_SIZE(ibms); i++) {
- ret = ibm_init(&ibms[i]);
- if (ret >= 0 && *ibms[i].param)
- ret = ibms[i].write(ibms[i].param);
- if (ret < 0) {
- acpi_ibm_exit();
- return ret;
- }
- }
-
- return 0;
-}
-
-module_init(acpi_ibm_init);
-module_exit(acpi_ibm_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 10:38:45 +0000