diff options
Diffstat (limited to 'drivers/ata/ahci.c')
| -rw-r--r-- | drivers/ata/ahci.c | 21 |
1 files changed, 20 insertions, 1 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c729e6988bb..2e1a7cb2ed5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_mv */ { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_MV_PATA), + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ @@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + static inline int ahci_nr_ports(u32 cap) { return (cap & 0x1f) + 1; @@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev, "MV_AHCI HACK: port_map %x -> %x\n", port_map, port_map & mv); + dev_printk(KERN_ERR, &pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); port_map &= mv; } @@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) |