aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_hpt3x2n.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
-rw-r--r--drivers/ata/pata_hpt3x2n.c74
1 files changed, 58 insertions, 16 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 65f2e180e7f..6a34521b9e0 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,10 +8,10 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
+ * Portions Copyright (C) 2005-2006 MontaVista Software, Inc.
*
*
* TODO
- * 371N
* Work out best PLL policy
*/
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -115,14 +115,13 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
}
/**
- * hpt3x2n_pre_reset - reset the hpt3x2n bus
- * @ap: ATA port to reset
+ * hpt3x2n_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
*
- * Perform the initial reset handling for the 3x2n series controllers.
- * Reset the hardware and state machine, obtain the cable type.
+ * Return the cable type attached to this port
*/
-static int hpt3xn_pre_reset(struct ata_port *ap)
+static int hpt3x2n_cable_detect(struct ata_port *ap)
{
u8 scr2, ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -135,15 +134,26 @@ static int hpt3xn_pre_reset(struct ata_port *ap)
pci_write_config_byte(pdev, 0x5B, scr2);
if (ata66 & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
else
- ap->cbl = ATA_CBL_PATA80;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * hpt3x2n_pre_reset - reset the hpt3x2n bus
+ * @ap: ATA port to reset
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the initial reset handling for the 3x2n series controllers.
+ * Reset the hardware and state machine,
+ */
+static int hpt3xn_pre_reset(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
/* Reset the state machine */
- pci_write_config_byte(pdev, 0x50, 0x37);
- pci_write_config_byte(pdev, 0x54, 0x37);
+ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
-
return ata_std_prereset(ap);
}
@@ -364,6 +374,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = hpt3x2n_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = hpt3x2n_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -422,8 +433,9 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
{
unsigned long freq;
u32 fcnt;
+ unsigned long iobase = pci_resource_start(pdev, 4);
- pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt);
+ fcnt = inl(iobase + 0x90); /* Not PCI readable for some chips */
if ((fcnt >> 12) != 0xABCDE) {
printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n");
return 33; /* Not BIOS set */
@@ -492,6 +504,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
unsigned int pci_mhz;
unsigned int f_low, f_high;
int adjust;
+ unsigned long iobase = pci_resource_start(dev, 4);
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -501,6 +514,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (class_rev < 6)
return -ENODEV;
break;
+ case PCI_DEVICE_ID_TTI_HPT371:
+ if (class_rev < 2)
+ return -ENODEV;
+ /* 371N if rev > 1 */
+ break;
case PCI_DEVICE_ID_TTI_HPT372:
/* 372N if rev >= 1*/
if (class_rev == 0)
@@ -528,6 +546,19 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
irqmask &= ~0x10;
pci_write_config_byte(dev, 0x5a, irqmask);
+ /*
+ * HPT371 chips physically have only one channel, the secondary one,
+ * but the primary channel registers do exist! Go figure...
+ * So, we manually disable the non-existing channel here
+ * (if the BIOS hasn't done this already).
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371) {
+ u8 mcr1;
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ mcr1 &= ~0x04;
+ pci_write_config_byte(dev, 0x50, mcr1);
+ }
+
/* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
50 for UDMA100. Right now we always use 66 */
@@ -546,14 +577,24 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
break;
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
- if (adjust == 8)
- printk(KERN_WARNING "hpt3xn: DPLL did not stabilize.\n");
+ if (adjust == 8) {
+ printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+ return -ENODEV;
+ }
/* Set our private data up. We only need a few flags so we use
it directly */
port->private_data = NULL;
- if (pci_mhz > 60)
+ if (pci_mhz > 60) {
port->private_data = (void *)PCI66;
+ /*
+ * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+ * the MISC. register to stretch the UltraDMA Tss timing.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
+ outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
+ }
/* Now kick off ATA set up */
port_info[0] = port_info[1] = port;
@@ -562,6 +603,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
static const struct pci_device_id hpt3x2n[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
+ { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), },