aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_mpiix.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_mpiix.c')
-rw-r--r--drivers/ata/pata_mpiix.c40
1 files changed, 19 insertions, 21 deletions
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 4abe45ac19a..987c5fafab0 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.6"
enum {
IDETIM = 0x6C, /* IDE control register */
@@ -53,7 +53,6 @@ static int mpiix_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
return -ENOENT;
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -185,12 +184,12 @@ static struct ata_port_operations mpiix_port_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = mpiix_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = mpiix_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -201,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = {
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* Single threaded by the PCI probe logic */
- static struct ata_probe_ent probe;
static int printed_version;
+ struct ata_host *host;
+ struct ata_port *ap;
void __iomem *cmd_addr, *ctl_addr;
u16 idetim;
int irq;
@@ -210,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
+ host = ata_host_alloc(&dev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
/* MPIIX has many functions which can be turned on or off according
to other devices present. Make sure IDE is enabled before we try
and use it */
@@ -238,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
without BARs set fools the setup. #2 If you pci_disable_device
the MPIIX your box goes castors up */
- INIT_LIST_HEAD(&probe.node);
- probe.dev = pci_dev_to_dev(dev);
- probe.port_ops = &mpiix_port_ops;
- probe.sht = &mpiix_sht;
- probe.pio_mask = 0x1F;
- probe.irq_flags = IRQF_SHARED;
- probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- probe.n_ports = 1;
+ ap = host->ports[0];
+ ap->ops = &mpiix_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
- probe.irq = irq;
- probe.port[0].cmd_addr = cmd_addr;
- probe.port[0].ctl_addr = ctl_addr;
- probe.port[0].altstatus_addr = ctl_addr;
+ ap->ioaddr.cmd_addr = cmd_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
- ata_std_ports(&probe.port[0]);
+ ata_std_ports(&ap->ioaddr);
- /* Now add the port that is active */
- if (ata_device_add(&probe))
- return 0;
- return -ENODEV;
+ /* activate host */
+ return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+ &mpiix_sht);
}
static const struct pci_device_id mpiix[] = {