aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/cciss.c5
-rw-r--r--drivers/block/ll_rw_blk.c38
-rw-r--r--drivers/block/paride/pf.c22
-rw-r--r--drivers/block/scsi_ioctl.c1
-rw-r--r--drivers/block/ub.c55
5 files changed, 47 insertions, 74 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c56f995aada..486b6e1c7df 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -483,9 +483,6 @@ static int cciss_open(struct inode *inode, struct file *filep)
printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
- if (host->busy_initializing)
- return -EBUSY;
-
if (host->busy_initializing || drv->busy_configuring)
return -EBUSY;
/*
@@ -2991,6 +2988,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
cciss_procinit(i);
+ hba[i]->busy_initializing = 0;
for(j=0; j < NWD; j++) { /* mfm */
drive_info_struct *drv = &(hba[i]->drv[j]);
@@ -3033,7 +3031,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
add_disk(disk);
}
- hba[i]->busy_initializing = 0;
return(1);
clean4:
diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c
index 483d71b10cf..baedac52294 100644
--- a/drivers/block/ll_rw_blk.c
+++ b/drivers/block/ll_rw_blk.c
@@ -2373,44 +2373,6 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
EXPORT_SYMBOL(blkdev_issue_flush);
-/**
- * blkdev_scsi_issue_flush_fn - issue flush for SCSI devices
- * @q: device queue
- * @disk: gendisk
- * @error_sector: error offset
- *
- * Description:
- * Devices understanding the SCSI command set, can use this function as
- * a helper for issuing a cache flush. Note: driver is required to store
- * the error offset (in case of error flushing) in ->sector of struct
- * request.
- */
-int blkdev_scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk,
- sector_t *error_sector)
-{
- struct request *rq = blk_get_request(q, WRITE, __GFP_WAIT);
- int ret;
-
- rq->flags |= REQ_BLOCK_PC | REQ_SOFTBARRIER;
- rq->sector = 0;
- memset(rq->cmd, 0, sizeof(rq->cmd));
- rq->cmd[0] = 0x35;
- rq->cmd_len = 12;
- rq->data = NULL;
- rq->data_len = 0;
- rq->timeout = 60 * HZ;
-
- ret = blk_execute_rq(q, disk, rq, 0);
-
- if (ret && error_sector)
- *error_sector = rq->sector;
-
- blk_put_request(rq);
- return ret;
-}
-
-EXPORT_SYMBOL(blkdev_scsi_issue_flush_fn);
-
static void drive_stat_acct(struct request *rq, int nr_sectors, int new_io)
{
int rw = rq_data_dir(rq);
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 711d2f314ac..94af920465b 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -750,6 +750,14 @@ static int pf_ready(void)
static struct request_queue *pf_queue;
+static void pf_end_request(int uptodate)
+{
+ if (pf_req) {
+ end_request(pf_req, uptodate);
+ pf_req = NULL;
+ }
+}
+
static void do_pf_request(request_queue_t * q)
{
if (pf_busy)
@@ -765,7 +773,7 @@ repeat:
pf_count = pf_req->current_nr_sectors;
if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
- end_request(pf_req, 0);
+ pf_end_request(0);
goto repeat;
}
@@ -780,7 +788,7 @@ repeat:
pi_do_claimed(pf_current->pi, do_pf_write);
else {
pf_busy = 0;
- end_request(pf_req, 0);
+ pf_end_request(0);
goto repeat;
}
}
@@ -798,9 +806,11 @@ static int pf_next_buf(void)
if (!pf_count)
return 1;
spin_lock_irqsave(&pf_spin_lock, saved_flags);
- end_request(pf_req, 1);
- pf_count = pf_req->current_nr_sectors;
- pf_buf = pf_req->buffer;
+ pf_end_request(1);
+ if (pf_req) {
+ pf_count = pf_req->current_nr_sectors;
+ pf_buf = pf_req->buffer;
+ }
spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
return 1;
}
@@ -810,7 +820,7 @@ static inline void next_request(int success)
unsigned long saved_flags;
spin_lock_irqsave(&pf_spin_lock, saved_flags);
- end_request(pf_req, success);
+ pf_end_request(success);
pf_busy = 0;
do_pf_request(pf_queue);
spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
diff --git a/drivers/block/scsi_ioctl.c b/drivers/block/scsi_ioctl.c
index 856c2278e9d..079ec344eb4 100644
--- a/drivers/block/scsi_ioctl.c
+++ b/drivers/block/scsi_ioctl.c
@@ -168,6 +168,7 @@ static int verify_command(struct file *file, unsigned char *cmd)
safe_for_write(WRITE_VERIFY_12),
safe_for_write(WRITE_16),
safe_for_write(WRITE_LONG),
+ safe_for_write(WRITE_LONG_2),
safe_for_write(ERASE),
safe_for_write(GPCMD_MODE_SELECT_10),
safe_for_write(MODE_SELECT),
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index aa0bf7ee008..ed4d5006fe6 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -172,7 +172,7 @@ struct bulk_cs_wrap {
*/
struct ub_dev;
-#define UB_MAX_REQ_SG 4
+#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
#define UB_MAX_SECTORS 64
/*
@@ -387,7 +387,7 @@ struct ub_dev {
struct bulk_cs_wrap work_bcs;
struct usb_ctrlrequest work_cr;
- int sg_stat[UB_MAX_REQ_SG+1];
+ int sg_stat[6];
struct ub_scsi_trace tr;
};
@@ -525,12 +525,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
"qlen %d qmax %d\n",
sc->cmd_queue.qlen, sc->cmd_queue.qmax);
cnt += sprintf(page + cnt,
- "sg %d %d %d %d %d\n",
+ "sg %d %d %d %d %d .. %d\n",
sc->sg_stat[0],
sc->sg_stat[1],
sc->sg_stat[2],
sc->sg_stat[3],
- sc->sg_stat[4]);
+ sc->sg_stat[4],
+ sc->sg_stat[5]);
list_for_each (p, &sc->luns) {
lun = list_entry(p, struct ub_lun, link);
@@ -835,7 +836,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
/*
* build the command
@@ -891,7 +892,7 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
@@ -1010,7 +1011,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->send_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
/* Fill what we shouldn't be filling, because usb-storage did so. */
sc->work_urb.actual_length = 0;
@@ -1019,7 +1019,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
return rc;
}
@@ -1190,11 +1189,9 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
if (urb->status != 0) {
- printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
goto Bad_End;
}
if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
- printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
/* XXX Must do reset here to unconfuse the device */
goto Bad_End;
}
@@ -1395,14 +1392,12 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
page_address(sg->page) + sg->offset, sg->length,
ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
@@ -1442,7 +1437,6 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->recv_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
&sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -1563,7 +1557,6 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -2000,17 +1993,16 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
(unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
if (rc == -EPIPE) {
- printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
sc->name); /* P3 */
} else {
- printk(KERN_WARNING
+ printk(KERN_NOTICE
"%s: Unable to submit GetMaxLUN (%d)\n",
sc->name, rc);
}
@@ -2028,6 +2020,18 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
+ if ((rc = sc->work_urb.status) < 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_NOTICE
+ "%s: Error at GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_io;
+ }
+
if (sc->work_urb.actual_length != 1) {
printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
sc->work_urb.actual_length); /* P3 */
@@ -2048,6 +2052,7 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
kfree(p);
return nluns;
+err_io:
err_submit:
kfree(p);
err_alloc:
@@ -2080,7 +2085,6 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -2213,8 +2217,10 @@ static int ub_probe(struct usb_interface *intf,
* This is needed to clear toggles. It is a problem only if we do
* `rmmod ub && modprobe ub` without disconnects, but we like that.
*/
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
/*
* The way this is used by the startup code is a little specific.
@@ -2241,10 +2247,10 @@ static int ub_probe(struct usb_interface *intf,
for (i = 0; i < 3; i++) {
if ((rc = ub_sync_getmaxlun(sc)) < 0) {
/*
- * Some devices (i.e. Iomega Zip100) need this --
- * apparently the bulk pipes get STALLed when the
- * GetMaxLUN request is processed.
- * XXX I have a ZIP-100, verify it does this.
+ * This segment is taken from usb-storage. They say
+ * that ZIP-100 needs this, but my own ZIP-100 works
+ * fine without this.
+ * Still, it does not seem to hurt anything.
*/
if (rc == -EPIPE) {
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
@@ -2313,7 +2319,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
disk->private_data = lun;
- disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
+ disk->driverfs_dev = &sc->intf->dev;
rc = -ENOMEM;
if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
@@ -2466,9 +2472,6 @@ static int __init ub_init(void)
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
devfs_mk_dir(DEVFS_NAME);
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 05:51:43 +0000