aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/ipmi/ipmi_bt_sm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ipmi/ipmi_bt_sm.c')
-rw-r--r--drivers/char/ipmi/ipmi_bt_sm.c153
1 files changed, 94 insertions, 59 deletions
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index e736119b649..7b98c067190 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -37,26 +37,32 @@
#define BT_DEBUG_ENABLE 1 /* Generic messages */
#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */
#define BT_DEBUG_STATES 4 /* Verbose look at state changes */
-/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
- value */
+/*
+ * BT_DEBUG_OFF must be zero to correspond to the default uninitialized
+ * value
+ */
static int bt_debug; /* 0 == BT_DEBUG_OFF */
module_param(bt_debug, int, 0644);
MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
-/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
- and 64 byte buffers. However, one HP implementation wants 255 bytes of
- buffer (with a documented message of 160 bytes) so go for the max.
- Since the Open IPMI architecture is single-message oriented at this
- stage, the queue depth of BT is of no concern. */
+/*
+ * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
+ * and 64 byte buffers. However, one HP implementation wants 255 bytes of
+ * buffer (with a documented message of 160 bytes) so go for the max.
+ * Since the Open IPMI architecture is single-message oriented at this
+ * stage, the queue depth of BT is of no concern.
+ */
#define BT_NORMAL_TIMEOUT 5 /* seconds */
#define BT_NORMAL_RETRY_LIMIT 2
#define BT_RESET_DELAY 6 /* seconds after warm reset */
-/* States are written in chronological order and usually cover
- multiple rows of the state table discussion in the IPMI spec. */
+/*
+ * States are written in chronological order and usually cover
+ * multiple rows of the state table discussion in the IPMI spec.
+ */
enum bt_states {
BT_STATE_IDLE = 0, /* Order is critical in this list */
@@ -76,10 +82,12 @@ enum bt_states {
BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */
};
-/* Macros seen at the end of state "case" blocks. They help with legibility
- and debugging. */
+/*
+ * Macros seen at the end of state "case" blocks. They help with legibility
+ * and debugging.
+ */
-#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
+#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; }
#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; }
@@ -110,11 +118,13 @@ struct si_sm_data {
#define BT_H_BUSY 0x40
#define BT_B_BUSY 0x80
-/* Some bits are toggled on each write: write once to set it, once
- more to clear it; writing a zero does nothing. To absolutely
- clear it, check its state and write if set. This avoids the "get
- current then use as mask" scheme to modify one bit. Note that the
- variable "bt" is hardcoded into these macros. */
+/*
+ * Some bits are toggled on each write: write once to set it, once
+ * more to clear it; writing a zero does nothing. To absolutely
+ * clear it, check its state and write if set. This avoids the "get
+ * current then use as mask" scheme to modify one bit. Note that the
+ * variable "bt" is hardcoded into these macros.
+ */
#define BT_STATUS bt->io->inputb(bt->io, 0)
#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x)
@@ -125,8 +135,10 @@ struct si_sm_data {
#define BT_INTMASK_R bt->io->inputb(bt->io, 2)
#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x)
-/* Convenience routines for debugging. These are not multi-open safe!
- Note the macros have hardcoded variables in them. */
+/*
+ * Convenience routines for debugging. These are not multi-open safe!
+ * Note the macros have hardcoded variables in them.
+ */
static char *state2txt(unsigned char state)
{
@@ -182,7 +194,8 @@ static char *status2txt(unsigned char status)
static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
{
memset(bt, 0, sizeof(struct si_sm_data));
- if (bt->io != io) { /* external: one-time only things */
+ if (bt->io != io) {
+ /* external: one-time only things */
bt->io = io;
bt->seq = 0;
}
@@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
for (i = 0; i < size; i ++)
- printk (" %02x", data[i]);
+ printk(" %02x", data[i]);
printk("\n");
}
bt->write_data[0] = size + 1; /* all data plus seq byte */
@@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt,
return 0;
}
-/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
- it calls this. Strip out the length and seq bytes. */
+/*
+ * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
+ * it calls this. Strip out the length and seq bytes.
+ */
static int bt_get_result(struct si_sm_data *bt,
unsigned char *data,
@@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt,
memcpy(data + 2, bt->read_data + 4, msg_len - 2);
if (bt_debug & BT_DEBUG_MSG) {
- printk (KERN_WARNING "BT: result %d bytes:", msg_len);
+ printk(KERN_WARNING "BT: result %d bytes:", msg_len);
for (i = 0; i < msg_len; i++)
printk(" %02x", data[i]);
- printk ("\n");
+ printk("\n");
}
return msg_len;
}
@@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt)
BT_INTMASK_W(BT_BMC_HWRST);
}
-/* Get rid of an unwanted/stale response. This should only be needed for
- BMCs that support multiple outstanding requests. */
+/*
+ * Get rid of an unwanted/stale response. This should only be needed for
+ * BMCs that support multiple outstanding requests.
+ */
static void drain_BMC2HOST(struct si_sm_data *bt)
{
@@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt)
printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
bt->write_count, bt->seq);
for (i = 0; i < bt->write_count; i++)
- printk (" %02x", bt->write_data[i]);
- printk ("\n");
+ printk(" %02x", bt->write_data[i]);
+ printk("\n");
}
for (i = 0; i < bt->write_count; i++)
HOST2BMC(bt->write_data[i]);
@@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt)
{
unsigned char i;
- /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
- Keep layout of first four bytes aligned with write_data[] */
+ /*
+ * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
+ * Keep layout of first four bytes aligned with write_data[]
+ */
bt->read_data[0] = BMC2HOST;
bt->read_count = bt->read_data[0];
@@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt)
if (max > 16)
max = 16;
for (i = 0; i < max; i++)
- printk (" %02x", bt->read_data[i]);
- printk ("%s\n", bt->read_count == max ? "" : " ...");
+ printk(KERN_CONT " %02x", bt->read_data[i]);
+ printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ...");
}
/* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
@@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */
reason, STATE2TXT, STATUS2TXT);
- /* Per the IPMI spec, retries are based on the sequence number
- known only to this module, so manage a restart here. */
+ /*
+ * Per the IPMI spec, retries are based on the sequence number
+ * known only to this module, so manage a restart here.
+ */
(bt->error_retries)++;
if (bt->error_retries < bt->BT_CAP_retries) {
printk("%d retries left\n",
@@ -412,8 +433,8 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
- printk("failed %d retries, sending error response\n",
- bt->BT_CAP_retries);
+ printk(KERN_WARNING "failed %d retries, sending error response\n",
+ bt->BT_CAP_retries);
if (!bt->nonzero_status)
printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
@@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt,
return SI_SM_CALL_WITHOUT_DELAY;
}
- /* Concoct a useful error message, set up the next state, and
- be done with this sequence. */
+ /*
+ * Concoct a useful error message, set up the next state, and
+ * be done with this sequence.
+ */
bt->state = BT_STATE_IDLE;
switch (cCode) {
@@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
last_printed = bt->state;
}
- /* Commands that time out may still (eventually) provide a response.
- This stale response will get in the way of a new response so remove
- it if possible (hopefully during IDLE). Even if it comes up later
- it will be rejected by its (now-forgotten) seq number. */
+ /*
+ * Commands that time out may still (eventually) provide a response.
+ * This stale response will get in the way of a new response so remove
+ * it if possible (hopefully during IDLE). Even if it comes up later
+ * it will be rejected by its (now-forgotten) seq number.
+ */
if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
drain_BMC2HOST(bt);
@@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
}
if ((bt->state != BT_STATE_IDLE) &&
- (bt->state < BT_STATE_PRINTME)) { /* check timeout */
+ (bt->state < BT_STATE_PRINTME)) {
+ /* check timeout */
bt->timeout -= time;
if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
return error_recovery(bt,
@@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
switch (bt->state) {
- /* Idle state first checks for asynchronous messages from another
- channel, then does some opportunistic housekeeping. */
+ /*
+ * Idle state first checks for asynchronous messages from another
+ * channel, then does some opportunistic housekeeping.
+ */
case BT_STATE_IDLE:
if (status & BT_SMS_ATN) {
@@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
BT_CONTROL(BT_H_BUSY); /* set */
- /* Uncached, ordered writes should just proceeed serially but
- some BMCs don't clear B2H_ATN with one hit. Fast-path a
- workaround without too much penalty to the general case. */
+ /*
+ * Uncached, ordered writes should just proceeed serially but
+ * some BMCs don't clear B2H_ATN with one hit. Fast-path a
+ * workaround without too much penalty to the general case.
+ */
BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */
BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_CLEAR_B2H:
- if (status & BT_B2H_ATN) { /* keep hitting it */
+ if (status & BT_B2H_ATN) {
+ /* keep hitting it */
BT_CONTROL(BT_B2H_ATN);
BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
}
@@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
SI_SM_CALL_WITHOUT_DELAY);
case BT_STATE_READ_BYTES:
- if (!(status & BT_H_BUSY)) /* check in case of retry */
+ if (!(status & BT_H_BUSY))
+ /* check in case of retry */
BT_CONTROL(BT_H_BUSY);
BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */
i = read_all_bytes(bt); /* true == packet seq match */
@@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_STATE_CHANGE(BT_STATE_XACTION_START,
SI_SM_CALL_WITH_DELAY);
- /* Get BT Capabilities, using timing of upper level state machine.
- Set outreqs to prevent infinite loop on timeout. */
+ /*
+ * Get BT Capabilities, using timing of upper level state machine.
+ * Set outreqs to prevent infinite loop on timeout.
+ */
case BT_STATE_CAPABILITIES_BEGIN:
bt->BT_CAP_outreqs = 1;
{
@@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
static int bt_detect(struct si_sm_data *bt)
{
- /* It's impossible for the BT status and interrupt registers to be
- all 1's, (assuming a properly functioning, self-initialized BMC)
- but that's what you get from reading a bogus address, so we
- test that first. The calling routine uses negative logic. */
+ /*
+ * It's impossible for the BT status and interrupt registers to be
+ * all 1's, (assuming a properly functioning, self-initialized BMC)
+ * but that's what you get from reading a bogus address, so we
+ * test that first. The calling routine uses negative logic.
+ */
if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
return 1;
@@ -658,8 +694,7 @@ static int bt_size(void)
return sizeof(struct si_sm_data);
}
-struct si_sm_handlers bt_smi_handlers =
-{
+struct si_sm_handlers bt_smi_handlers = {
.init_data = bt_init_data,
.start_transaction = bt_start_transaction,
.get_result = bt_get_result,
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-30 04:56:40 +0000