diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_si_intf.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 466 |
1 files changed, 264 insertions, 202 deletions
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ba7e75b731c..97b6225c070 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -80,7 +80,7 @@ #define SI_USEC_PER_JIFFY (1000000/HZ) #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a - short timeout */ + short timeout */ /* Bit for BMC global enables. */ #define IPMI_BMC_RCV_MSG_INTR 0x01 @@ -114,8 +114,7 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = -{ +static struct device_driver ipmi_driver = { .name = DEVICE_NAME, .bus = &platform_bus_type }; @@ -169,8 +168,7 @@ enum si_stat_indexes { SI_NUM_STATS }; -struct smi_info -{ +struct smi_info { int intf_num; ipmi_smi_t intf; struct si_sm_data *si_sm; @@ -183,8 +181,10 @@ struct smi_info struct ipmi_smi_msg *curr_msg; enum si_intf_state si_state; - /* Used to handle the various types of I/O that can occur with - IPMI */ + /* + * Used to handle the various types of I/O that can occur with + * IPMI + */ struct si_sm_io io; int (*io_setup)(struct smi_info *info); void (*io_cleanup)(struct smi_info *info); @@ -195,15 +195,18 @@ struct smi_info void (*addr_source_cleanup)(struct smi_info *info); void *addr_source_data; - /* Per-OEM handler, called from handle_flags(). - Returns 1 when handle_flags() needs to be re-run - or 0 indicating it set si_state itself. - */ + /* + * Per-OEM handler, called from handle_flags(). Returns 1 + * when handle_flags() needs to be re-run or 0 indicating it + * set si_state itself. + */ int (*oem_data_avail_handler)(struct smi_info *smi_info); - /* Flags from the last GET_MSG_FLAGS command, used when an ATTN - is set to hold the flags until we are done handling everything - from the flags. */ + /* + * Flags from the last GET_MSG_FLAGS command, used when an ATTN + * is set to hold the flags until we are done handling everything + * from the flags. + */ #define RECEIVE_MSG_AVAIL 0x01 #define EVENT_MSG_BUFFER_FULL 0x02 #define WDT_PRE_TIMEOUT_INT 0x08 @@ -211,25 +214,31 @@ struct smi_info #define OEM1_DATA_AVAIL 0x40 #define OEM2_DATA_AVAIL 0x80 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ - OEM1_DATA_AVAIL | \ - OEM2_DATA_AVAIL) + OEM1_DATA_AVAIL | \ + OEM2_DATA_AVAIL) unsigned char msg_flags; - /* If set to true, this will request events the next time the - state machine is idle. */ + /* + * If set to true, this will request events the next time the + * state machine is idle. + */ atomic_t req_events; - /* If true, run the state machine to completion on every send - call. Generally used after a panic to make sure stuff goes - out. */ + /* + * If true, run the state machine to completion on every send + * call. Generally used after a panic to make sure stuff goes + * out. + */ int run_to_completion; /* The I/O port of an SI interface. */ int port; - /* The space between start addresses of the two ports. For - instance, if the first port is 0xca2 and the spacing is 4, then - the second port is 0xca6. */ + /* + * The space between start addresses of the two ports. For + * instance, if the first port is 0xca2 and the spacing is 4, then + * the second port is 0xca6. + */ unsigned int spacing; /* zero if no irq; */ @@ -244,10 +253,12 @@ struct smi_info /* Used to gracefully stop the timer without race conditions. */ atomic_t stop_operation; - /* The driver will disable interrupts when it gets into a - situation where it cannot handle messages due to lack of - memory. Once that situation clears up, it will re-enable - interrupts. */ + /* + * The driver will disable interrupts when it gets into a + * situation where it cannot handle messages due to lack of + * memory. Once that situation clears up, it will re-enable + * interrupts. + */ int interrupt_disabled; /* From the get device id response... */ @@ -257,8 +268,10 @@ struct smi_info struct device *dev; struct platform_device *pdev; - /* True if we allocated the device, false if it came from - * someplace else (like PCI). */ + /* + * True if we allocated the device, false if it came from + * someplace else (like PCI). + */ int dev_registered; /* Slave address, could be reported from DMI. */ @@ -267,7 +280,7 @@ struct smi_info /* Counters and things for the proc filesystem. */ atomic_t stats[SI_NUM_STATS]; - struct task_struct *thread; + struct task_struct *thread; struct list_head link; }; @@ -288,7 +301,7 @@ static int try_smi_init(struct smi_info *smi); static void cleanup_one_si(struct smi_info *to_clean); static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); -static int register_xaction_notifier(struct notifier_block * nb) +static int register_xaction_notifier(struct notifier_block *nb) { return atomic_notifier_chain_register(&xaction_notifier_list, nb); } @@ -297,7 +310,7 @@ static void deliver_recv_msg(struct smi_info *smi_info, struct ipmi_smi_msg *msg) { /* Deliver the message to the upper layer with the lock - released. */ + released. */ spin_unlock(&(smi_info->si_lock)); ipmi_smi_msg_received(smi_info->intf, msg); spin_lock(&(smi_info->si_lock)); @@ -329,8 +342,10 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) struct timeval t; #endif - /* No need to save flags, we aleady have interrupts off and we - already hold the SMI lock. */ + /* + * No need to save flags, we aleady have interrupts off and we + * already hold the SMI lock. + */ if (!smi_info->run_to_completion) spin_lock(&(smi_info->msg_lock)); @@ -353,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) link); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif err = atomic_notifier_call_chain(&xaction_notifier_list, 0, smi_info); @@ -365,13 +380,12 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) smi_info->si_sm, smi_info->curr_msg->data, smi_info->curr_msg->data_size); - if (err) { + if (err) return_hosed_msg(smi_info, err); - } rv = SI_SM_CALL_WITHOUT_DELAY; } - out: + out: if (!smi_info->run_to_completion) spin_unlock(&(smi_info->msg_lock)); @@ -382,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info) { unsigned char msg[2]; - /* If we are enabling interrupts, we have to tell the - BMC to use them. */ + /* + * If we are enabling interrupts, we have to tell the + * BMC to use them. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; @@ -415,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info) smi_info->si_state = SI_CLEARING_FLAGS; } -/* When we have a situtaion where we run out of memory and cannot - allocate messages, we just leave them in the BMC and run the system - polled until we can allocate some memory. Once we have some - memory, we will re-enable the interrupt. */ +/* + * When we have a situtaion where we run out of memory and cannot + * allocate messages, we just leave them in the BMC and run the system + * polled until we can allocate some memory. Once we have some + * memory, we will re-enable the interrupt. + */ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { @@ -486,12 +504,11 @@ static void handle_flags(struct smi_info *smi_info) smi_info->curr_msg->data_size); smi_info->si_state = SI_GETTING_EVENTS; } else if (smi_info->msg_flags & OEM_DATA_AVAIL && - smi_info->oem_data_avail_handler) { + smi_info->oem_data_avail_handler) { if (smi_info->oem_data_avail_handler(smi_info)) goto retry; - } else { + } else smi_info->si_state = SI_NORMAL; - } } static void handle_transaction_done(struct smi_info *smi_info) @@ -501,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info) struct timeval t; do_gettimeofday(&t); - printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif switch (smi_info->si_state) { case SI_NORMAL: @@ -514,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; deliver_recv_msg(smi_info, msg); @@ -530,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); if (msg[2] != 0) { - /* Error fetching flags, just give up for - now. */ + /* Error fetching flags, just give up for now. */ smi_info->si_state = SI_NORMAL; } else if (len < 4) { - /* Hmm, no flags. That's technically illegal, but - don't use uninitialized data. */ + /* + * Hmm, no flags. That's technically illegal, but + * don't use uninitialized data. + */ smi_info->si_state = SI_NORMAL; } else { smi_info->msg_flags = msg[3]; @@ -572,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -587,10 +609,12 @@ static void handle_transaction_done(struct smi_info *smi_info) } else { smi_inc_stat(smi_info, events); - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -606,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -621,10 +647,12 @@ static void handle_transaction_done(struct smi_info *smi_info) } else { smi_inc_stat(smi_info, incoming_messages); - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -712,46 +740,49 @@ static void handle_transaction_done(struct smi_info *smi_info) } } -/* Called on timeouts and events. Timeouts should pass the elapsed - time, interrupts should pass in zero. Must be called with - si_lock held and interrupts disabled. */ +/* + * Called on timeouts and events. Timeouts should pass the elapsed + * time, interrupts should pass in zero. Must be called with + * si_lock held and interrupts disabled. + */ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, int time) { enum si_sm_result si_sm_result; restart: - /* There used to be a loop here that waited a little while - (around 25us) before giving up. That turned out to be - pointless, the minimum delays I was seeing were in the 300us - range, which is far too long to wait in an interrupt. So - we just run until the state machine tells us something - happened or it needs a delay. */ + /* + * There used to be a loop here that waited a little while + * (around 25us) before giving up. That turned out to be + * pointless, the minimum delays I was seeing were in the 300us + * range, which is far too long to wait in an interrupt. So + * we just run until the state machine tells us something + * happened or it needs a delay. + */ si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); time = 0; while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) - { si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) - { + if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) { smi_inc_stat(smi_info, complete_transactions); handle_transaction_done(smi_info); si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - else if (si_sm_result == SI_SM_HOSED) - { + } else if (si_sm_result == SI_SM_HOSED) { smi_inc_stat(smi_info, hosed_count); - /* Do the before return_hosed_msg, because that - releases the lock. */ + /* + * Do the before return_hosed_msg, because that + * releases the lock. + */ smi_info->si_state = SI_NORMAL; if (smi_info->curr_msg != NULL) { - /* If we were handling a user message, format - a response to send to the upper layer to - tell it about the error. */ + /* + * If we were handling a user message, format + * a response to send to the upper layer to + * tell it about the error. + */ return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED); } si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); @@ -761,17 +792,18 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, * We prefer handling attn over new messages. But don't do * this if there is not yet an upper layer to handle anything. */ - if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) - { + if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) { unsigned char msg[2]; smi_inc_stat(smi_info, attentions); - /* Got a attn, send down a get message flags to see - what's causing it. It would be better to handle - this in the upper layer, but due to the way - interrupts work with the SMI, that's not really - possible. */ + /* + * Got a attn, send down a get message flags to see + * what's causing it. It would be better to handle + * this in the upper layer, but due to the way + * interrupts work with the SMI, that's not really + * possible. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_MSG_FLAGS_CMD; @@ -788,13 +820,14 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, si_sm_result = start_next_msg(smi_info); if (si_sm_result != SI_SM_IDLE) goto restart; - } + } if ((si_sm_result == SI_SM_IDLE) - && (atomic_read(&smi_info->req_events))) - { - /* We are idle and the upper layer requested that I fetch - events, so do so. */ + && (atomic_read(&smi_info->req_events))) { + /* + * We are idle and the upper layer requested that I fetch + * events, so do so. + */ atomic_set(&smi_info->req_events, 0); smi_info->curr_msg = ipmi_alloc_smi_msg(); @@ -871,11 +904,8 @@ static void sender(void *send_info, spin_unlock_irqrestore(&smi_info->msg_lock, flags); spin_lock_irqsave(&smi_info->si_lock, flags); - if ((smi_info->si_state == SI_NORMAL) - && (smi_info->curr_msg == NULL)) - { + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) start_next_msg(smi_info); - } spin_unlock_irqrestore(&smi_info->si_lock, flags); } @@ -906,9 +936,8 @@ static int ipmi_thread(void *data) spin_lock_irqsave(&(smi_info->si_lock), flags); smi_result = smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); - if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { - /* do nothing */ - } + if (smi_result == SI_SM_CALL_WITHOUT_DELAY) + ; /* do nothing */ else if (smi_result == SI_SM_CALL_WITH_DELAY) schedule(); else @@ -959,7 +988,7 @@ static void smi_timeout(unsigned long data) spin_lock_irqsave(&(smi_info->si_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif jiffies_now = jiffies; time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies) @@ -977,8 +1006,10 @@ static void smi_timeout(unsigned long data) goto do_add_timer; } - /* If the state machine asks for a short delay, then shorten - the timer timeout. */ + /* + * If the state machine asks for a short delay, then shorten + * the timer timeout. + */ if (smi_result == SI_SM_CALL_WITH_DELAY) { smi_inc_stat(smi_info, short_timeouts); smi_info->si_timer.expires = jiffies + 1; @@ -1005,7 +1036,7 @@ static irqreturn_t si_irq_handler(int irq, void *data) #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); @@ -1048,7 +1079,7 @@ static int smi_start_processing(void *send_info, * The BT interface is efficient enough to not need a thread, * and there is no need for a thread if we have interrupts. */ - else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) + else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) enable = 1; if (enable) { @@ -1074,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable) atomic_set(&smi_info->req_events, 0); } -static struct ipmi_smi_handlers handlers = -{ +static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, .start_processing = smi_start_processing, .sender = sender, @@ -1085,8 +1115,10 @@ static struct ipmi_smi_handlers handlers = .poll = poll, }; -/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, - a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ +/* + * There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS. + */ static LIST_HEAD(smi_infos); static DEFINE_MUTEX(smi_infos_lock); @@ -1277,10 +1309,9 @@ static void port_cleanup(struct smi_info *info) int idx; if (addr) { - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) release_region(addr + idx * info->io.regspacing, info->io.regsize); - } } } @@ -1294,8 +1325,10 @@ static int port_setup(struct smi_info *info) info->io_cleanup = port_cleanup; - /* Figure out the actual inb/inw/inl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual inb/inw/inl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = port_inb; @@ -1310,17 +1343,18 @@ static int port_setup(struct smi_info *info) info->io.outputb = port_outl; break; default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Some BIOSes reserve disjoint I/O regions in their ACPI + /* + * Some BIOSes reserve disjoint I/O regions in their ACPI * tables. This causes problems when trying to register the * entire I/O region. Therefore we must register each I/O * port separately. */ - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) { if (request_region(addr + idx * info->io.regspacing, info->io.regsize, DEVICE_NAME) == NULL) { /* Undo allocations */ @@ -1408,8 +1442,10 @@ static int mem_setup(struct smi_info *info) info->io_cleanup = mem_cleanup; - /* Figure out the actual readb/readw/readl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual readb/readw/readl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = intf_mem_inb; @@ -1430,16 +1466,18 @@ static int mem_setup(struct smi_info *info) break; #endif default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Calculate the total amount of memory to claim. This is an + /* + * Calculate the total amount of memory to claim. This is an * unusual looking calculation, but it avoids claiming any * more memory than it has to. It will claim everything * between the first address to the end of the last full - * register. */ + * register. + */ mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); @@ -1769,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void) #include <linux/acpi.h> -/* Once we get an ACPI failure, we don't try any more, because we go - through the tables sequentially. Once we don't find a table, there - are no more. */ +/* + * Once we get an ACPI failure, we don't try any more, because we go + * through the tables sequentially. Once we don't find a table, there + * are no more. + */ static int acpi_failure; /* For GPE-type interrupts. */ @@ -1834,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf + * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/ + * Docs/TechPapers/IA64/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; @@ -1856,14 +1897,18 @@ struct SPMITable { */ u8 InterruptType; - /* If bit 0 of InterruptType is set, then this is the SCI - interrupt in the GPEx_STS register. */ + /* + * If bit 0 of InterruptType is set, then this is the SCI + * interrupt in the GPEx_STS register. + */ u8 GPE; s16 Reserved; - /* If bit 1 of InterruptType is set, then this is the I/O - APIC/SAPIC interrupt. */ + /* + * If bit 1 of InterruptType is set, then this is the I/O + * APIC/SAPIC interrupt. + */ u32 GlobalSystemInterrupt; /* The actual register address. */ @@ -1881,7 +1926,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) if (spmi->IPMIlegacy != 1) { printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); - return -ENODEV; + return -ENODEV; } if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) @@ -1898,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->addr_source = "ACPI"; /* Figure out the interface type. */ - switch (spmi->InterfaceType) - { + switch (spmi->InterfaceType) { case 1: /* KCS */ info->si_type = SI_KCS; break; @@ -1947,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->io.addr_type = IPMI_IO_ADDR_SPACE; } else { kfree(info); - printk("ipmi_si: Unknown ACPI I/O Address type\n"); + printk(KERN_WARNING + "ipmi_si: Unknown ACPI I/O Address type\n"); return -EIO; } info->io.addr_data = spmi->addr.address; @@ -1981,8 +2026,7 @@ static __devinit void acpi_find_bmc(void) #endif #ifdef CONFIG_DMI -struct dmi_ipmi_data -{ +struct dmi_ipmi_data { u8 type; u8 addr_space; unsigned long base_addr; @@ -2007,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* I/O */ base_addr &= 0xFFFE; dmi->addr_space = IPMI_IO_ADDR_SPACE; - } - else { + } else /* Memory */ dmi->addr_space = IPMI_MEM_ADDR_SPACE; - } + /* If bit 4 of byte 0x10 is set, then the lsb for the address is odd. */ dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); @@ -2020,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* The top two bits of byte 0x10 hold the register spacing. */ reg_spacing = (data[0x10] & 0xC0) >> 6; - switch(reg_spacing){ + switch (reg_spacing) { case 0x00: /* Byte boundaries */ dmi->offset = 1; break; @@ -2036,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm, } } else { /* Old DMI spec. */ - /* Note that technically, the lower bit of the base + /* + * Note that technically, the lower bit of the base * address should be 1 if the address is I/O and 0 if * the address is in memory. So many systems get that * wrong (and all that I have seen are I/O) so we just * ignore that bit and assume I/O. Systems that use - * memory should use the newer spec, anyway. */ + * memory should use the newer spec, anyway. + */ dmi->base_addr = base_addr & 0xfffe; dmi->addr_space = IPMI_IO_ADDR_SPACE; dmi->offset = 1; @@ -2248,13 +2293,13 @@ static struct pci_device_id ipmi_pci_devices[] = { MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); static struct pci_driver ipmi_pci_driver = { - .name = DEVICE_NAME, - .id_table = ipmi_pci_devices, - .probe = ipmi_pci_probe, - .remove = __devexit_p(ipmi_pci_remove), + .name = DEVICE_NAME, + .id_table = ipmi_pci_devices, + .probe = ipmi_pci_probe, + .remove = __devexit_p(ipmi_pci_remove), #ifdef CONFIG_PM - .suspend = ipmi_pci_suspend, - .resume = ipmi_pci_resume, + .suspend = ipmi_pci_suspend, + .resume = ipmi_pci_resume, #endif }; #endif /* CONFIG_PCI */ @@ -2324,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev, info->io.addr_data, info->io.regsize, info->io.regspacing, info->irq); - dev->dev.driver_data = (void*) info; + dev->dev.driver_data = (void *) info; return try_smi_init(info); } @@ -2337,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev) static struct of_device_id ipmi_match[] = { - { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS }, - { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC }, - { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT }, + { .type = "ipmi", .compatible = "ipmi-kcs", + .data = (void *)(unsigned long) SI_KCS }, + { .type = "ipmi", .compatible = "ipmi-smic", + .data = (void *)(unsigned long) SI_SMIC }, + { .type = "ipmi", .compatible = "ipmi-bt", + .data = (void *)(unsigned long) SI_BT }, {}, }; -static struct of_platform_driver ipmi_of_platform_driver = -{ +static struct of_platform_driver ipmi_of_platform_driver = { .name = "ipmi", .match_table = ipmi_match, .probe = ipmi_of_probe, @@ -2365,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info) if (!resp) return -ENOMEM; - /* Do a Get Device ID command, since it comes back with some - useful info. */ + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ msg[0] = IPMI_NETFN_APP_REQUEST << 2; msg[1] = IPMI_GET_DEVICE_ID_CMD; smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); smi_result = smi_info->handlers->event(smi_info->si_sm, 0); - for (;;) - { + for (;;) { if (smi_result == SI_SM_CALL_WITH_DELAY || smi_result == SI_SM_CALL_WITH_TICK_DELAY) { schedule_timeout_uninterruptible(1); smi_result = smi_info->handlers->event( smi_info->si_sm, 100); - } - else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) - { + } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { smi_result = smi_info->handlers->event( smi_info->si_sm, 0); - } - else + } else break; } if (smi_result == SI_SM_HOSED) { - /* We couldn't get the state machine to run, so whatever's at - the port is probably not an IPMI SMI interface. */ + /* + * We couldn't get the state machine to run, so whatever's at + * the port is probably not an IPMI SMI interface. + */ rv = -ENODEV; goto out; } @@ -2476,7 +2523,7 @@ static int param_read_proc(char *page, char **start, off_t off, static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) { smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) | - RECEIVE_MSG_AVAIL); + RECEIVE_MSG_AVAIL); return 1; } @@ -2518,10 +2565,9 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; - } - else if (ipmi_version_major(id) < 1 || - (ipmi_version_major(id) == 1 && - ipmi_version_minor(id) < 5)) { + } else if (ipmi_version_major(id) < 1 || + (ipmi_version_major(id) == 1 && + ipmi_version_minor(id) < 5)) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; } @@ -2613,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { if (smi_info->intf) { - /* The timer and thread are only running if the - interface has been started up and registered. */ + /* + * The timer and thread are only running if the + * interface has been started up and registered. + */ if (smi_info->thread != NULL) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); @@ -2739,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi) /* Allocate the state machine's data and initialize it. */ new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); if (!new_smi->si_sm) { - printk(" Could not allocate state machine memory\n"); + printk(KERN_ERR "Could not allocate state machine memory\n"); rv = -ENOMEM; goto out_err; } @@ -2749,7 +2797,7 @@ static int try_smi_init(struct smi_info *new_smi) /* Now that we know the I/O size, we can set up the I/O. */ rv = new_smi->io_setup(new_smi); if (rv) { - printk(" Could not set up I/O space\n"); + printk(KERN_ERR "Could not set up I/O space\n"); goto out_err; } @@ -2765,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } - /* Attempt a get device id command. If it fails, we probably - don't have a BMC here. */ + /* + * Attempt a get device id command. If it fails, we probably + * don't have a BMC here. + */ rv = try_get_dev_id(new_smi); if (rv) { if (new_smi->addr_source) @@ -2791,16 +2841,20 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->intf_num = smi_num; smi_num++; - /* Start clearing the flags before we enable interrupts or the - timer to avoid racing with the timer. */ + /* + * Start clearing the flags before we enable interrupts or the + * timer to avoid racing with the timer. + */ start_clear_flags(new_smi); /* IRQ is defined to be set when non-zero. */ if (new_smi->irq) new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; if (!new_smi->dev) { - /* If we don't already have a device from something - * else (like PCI), then register a new one. */ + /* + * If we don't already have a device from something + * else (like PCI), then register a new one. + */ new_smi->pdev = platform_device_alloc("ipmi_si", new_smi->intf_num); if (rv) { @@ -2871,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi) mutex_unlock(&smi_infos_lock); - printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]); + printk(KERN_INFO "IPMI %s interface initialized\n", + si_to_str[new_smi->si_type]); return 0; @@ -2886,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi) if (new_smi->irq_cleanup) new_smi->irq_cleanup(new_smi); - /* Wait until we know that we are out of any interrupt - handlers might have been running before we freed the - interrupt. */ + /* + * Wait until we know that we are out of any interrupt + * handlers might have been running before we freed the + * interrupt. + */ synchronize_sched(); if (new_smi->si_sm) { @@ -2960,11 +3017,10 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PCI rv = pci_register_driver(&ipmi_pci_driver); - if (rv){ + if (rv) printk(KERN_ERR "init_ipmi_si: Unable to register PCI driver: %d\n", rv); - } #endif #ifdef CONFIG_PPC_OF @@ -2993,7 +3049,8 @@ static __devinit int init_ipmi_si(void) of_unregister_platform_driver(&ipmi_of_platform_driver); #endif driver_unregister(&ipmi_driver); - printk("ipmi_si: Unable to find any System Interface(s)\n"); + printk(KERN_WARNING + "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; } else { mutex_unlock(&smi_infos_lock); @@ -3015,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean) /* Tell the driver that we are shutting down. */ atomic_inc(&to_clean->stop_operation); - /* Make sure the timer and thread are stopped and will not run - again. */ + /* + * Make sure the timer and thread are stopped and will not run + * again. + */ wait_for_timer_and_thread(to_clean); - /* Timeouts are stopped, now make sure the interrupts are off - for the device. A little tricky with locks to make sure - there are no races. */ + /* + * Timeouts are stopped, now make sure the interrupts are off + * for the device. A little tricky with locks to make sure + * there are no races. + */ spin_lock_irqsave(&to_clean->si_lock, flags); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { spin_unlock_irqrestore(&to_clean->si_lock, flags); @@ -3092,4 +3153,5 @@ module_exit(cleanup_ipmi_si); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces."); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT" + " system interfaces."); |