aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig42
-rw-r--r--drivers/gpio/Makefile5
-rw-r--r--drivers/gpio/adp5520-gpio.c206
-rw-r--r--drivers/gpio/bt8xxgpio.c7
-rw-r--r--drivers/gpio/gpiolib.c253
-rw-r--r--drivers/gpio/langwell_gpio.c297
-rw-r--r--drivers/gpio/max7301.c1
-rw-r--r--drivers/gpio/mc33880.c196
-rw-r--r--drivers/gpio/mcp23s08.c5
-rw-r--r--drivers/gpio/pca953x.c4
-rw-r--r--drivers/gpio/pcf857x.c4
-rw-r--r--drivers/gpio/ucb1400_gpio.c125
-rw-r--r--drivers/gpio/wm831x-gpio.c252
13 files changed, 1381 insertions, 16 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 96dda81c922..2ad0128c63c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,23 @@ config GPIO_TWL4030
Say yes here to access the GPIO signals of various multi-function
power management chips from Texas Instruments.
+config GPIO_WM831X
+ tristate "WM831x GPIOs"
+ depends on MFD_WM831X
+ help
+ Say yes here to access the GPIO signals of WM831x power management
+ chips from Wolfson Microelectronics.
+
+config GPIO_ADP5520
+ tristate "GPIO Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip GPIO found
+ on Analog Devices ADP5520 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp5520-gpio.
+
comment "PCI GPIO expanders:"
config GPIO_BT8XX
@@ -173,6 +190,12 @@ config GPIO_BT8XX
If unsure, say N.
+config GPIO_LANGWELL
+ bool "Intel Moorestown Platform Langwell GPIO support"
+ depends on PCI
+ help
+ Say Y here to support Intel Moorestown platform GPIO.
+
comment "SPI GPIO expanders:"
config GPIO_MAX7301
@@ -188,4 +211,23 @@ config GPIO_MCP23S08
SPI driver for Microchip MCP23S08 I/O expander. This provides
a GPIO interface supporting inputs and outputs.
+config GPIO_MC33880
+ tristate "Freescale MC33880 high-side/low-side switch"
+ depends on SPI_MASTER
+ help
+ SPI driver for Freescale MC33880 high-side/low-side switch.
+ This provides GPIO interface supporting inputs and outputs.
+
+comment "AC97 GPIO expanders:"
+
+config GPIO_UCB1400
+ bool "Philips UCB1400 GPIO"
+ depends on UCB1400_CORE
+ help
+ This enables support for the Philips UCB1400 GPIO pins.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_gpio.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9244c6fcd8b..00a532c9a1e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,13 +4,18 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
obj-$(CONFIG_GPIOLIB) += gpiolib.o
+obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
+obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
+obj-$(CONFIG_GPIO_MC33880) += mc33880.o
obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
+obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
diff --git a/drivers/gpio/adp5520-gpio.c b/drivers/gpio/adp5520-gpio.c
new file mode 100644
index 00000000000..ad05bbc7ffd
--- /dev/null
+++ b/drivers/gpio/adp5520-gpio.c
@@ -0,0 +1,206 @@
+/*
+ * GPIO driver for Analog Devices ADP5520 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/adp5520.h>
+
+#include <linux/gpio.h>
+
+struct adp5520_gpio {
+ struct device *master;
+ struct gpio_chip gpio_chip;
+ unsigned char lut[ADP5520_MAXGPIOS];
+ unsigned long output;
+};
+
+static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5520_gpio *dev;
+ uint8_t reg_val;
+
+ dev = container_of(chip, struct adp5520_gpio, gpio_chip);
+
+ /*
+ * There are dedicated registers for GPIO IN/OUT.
+ * Make sure we return the right value, even when configured as output
+ */
+
+ if (test_bit(off, &dev->output))
+ adp5520_read(dev->master, GPIO_OUT, &reg_val);
+ else
+ adp5520_read(dev->master, GPIO_IN, &reg_val);
+
+ return !!(reg_val & dev->lut[off]);
+}
+
+static void adp5520_gpio_set_value(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ struct adp5520_gpio *dev;
+ dev = container_of(chip, struct adp5520_gpio, gpio_chip);
+
+ if (val)
+ adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
+ else
+ adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
+}
+
+static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5520_gpio *dev;
+ dev = container_of(chip, struct adp5520_gpio, gpio_chip);
+
+ clear_bit(off, &dev->output);
+
+ return adp5520_clr_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
+}
+
+static int adp5520_gpio_direction_output(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ struct adp5520_gpio *dev;
+ int ret = 0;
+ dev = container_of(chip, struct adp5520_gpio, gpio_chip);
+
+ set_bit(off, &dev->output);
+
+ if (val)
+ ret |= adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
+ else
+ ret |= adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
+
+ ret |= adp5520_set_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
+
+ return ret;
+}
+
+static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
+{
+ struct adp5520_gpio_platfrom_data *pdata = pdev->dev.platform_data;
+ struct adp5520_gpio *dev;
+ struct gpio_chip *gc;
+ int ret, i, gpios;
+ unsigned char ctl_mask = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdev->id != ID_ADP5520) {
+ dev_err(&pdev->dev, "only ADP5520 supports GPIO\n");
+ return -ENODEV;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ dev->master = pdev->dev.parent;
+
+ for (gpios = 0, i = 0; i < ADP5520_MAXGPIOS; i++)
+ if (pdata->gpio_en_mask & (1 << i))
+ dev->lut[gpios++] = 1 << i;
+
+ if (gpios < 1) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ gc = &dev->gpio_chip;
+ gc->direction_input = adp5520_gpio_direction_input;
+ gc->direction_output = adp5520_gpio_direction_output;
+ gc->get = adp5520_gpio_get_value;
+ gc->set = adp5520_gpio_set_value;
+ gc->can_sleep = 1;
+
+ gc->base = pdata->gpio_start;
+ gc->ngpio = gpios;
+ gc->label = pdev->name;
+ gc->owner = THIS_MODULE;
+
+ ret = adp5520_clr_bits(dev->master, GPIO_CFG_1,
+ pdata->gpio_en_mask);
+
+ if (pdata->gpio_en_mask & GPIO_C3)
+ ctl_mask |= C3_MODE;
+
+ if (pdata->gpio_en_mask & GPIO_R3)
+ ctl_mask |= R3_MODE;
+
+ if (ctl_mask)
+ ret = adp5520_set_bits(dev->master, LED_CONTROL,
+ ctl_mask);
+
+ ret |= adp5520_set_bits(dev->master, GPIO_PULLUP,
+ pdata->gpio_pullup_mask);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to write\n");
+ goto err;
+ }
+
+ ret = gpiochip_add(&dev->gpio_chip);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+err:
+ kfree(dev);
+ return ret;
+}
+
+static int __devexit adp5520_gpio_remove(struct platform_device *pdev)
+{
+ struct adp5520_gpio *dev;
+ int ret;
+
+ dev = platform_get_drvdata(pdev);
+ ret = gpiochip_remove(&dev->gpio_chip);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed, %d\n",
+ "gpiochip_remove()", ret);
+ return ret;
+ }
+
+ kfree(dev);
+ return 0;
+}
+
+static struct platform_driver adp5520_gpio_driver = {
+ .driver = {
+ .name = "adp5520-gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = adp5520_gpio_probe,
+ .remove = __devexit_p(adp5520_gpio_remove),
+};
+
+static int __init adp5520_gpio_init(void)
+{
+ return platform_driver_register(&adp5520_gpio_driver);
+}
+module_init(adp5520_gpio_init);
+
+static void __exit adp5520_gpio_exit(void)
+{
+ platform_driver_unregister(&adp5520_gpio_driver);
+}
+module_exit(adp5520_gpio_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("GPIO ADP5520 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-gpio");
diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/bt8xxgpio.c
index 984b587f0f9..2559f228940 100644
--- a/drivers/gpio/bt8xxgpio.c
+++ b/drivers/gpio/bt8xxgpio.c
@@ -46,8 +46,7 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
-
-#include <asm/gpio.h>
+#include <linux/gpio.h>
/* Steal the hardware definitions from the bttv driver. */
#include "../media/video/bt8xx/bt848.h"
@@ -331,13 +330,13 @@ static struct pci_driver bt8xxgpio_pci_driver = {
.resume = bt8xxgpio_resume,
};
-static int bt8xxgpio_init(void)
+static int __init bt8xxgpio_init(void)
{
return pci_register_driver(&bt8xxgpio_pci_driver);
}
module_init(bt8xxgpio_init)
-static void bt8xxgpio_exit(void)
+static void __exit bt8xxgpio_exit(void)
{
pci_unregister_driver(&bt8xxgpio_pci_driver);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 51a8d4103be..bb11a429394 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1,5 +1,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <linux/device.h>
@@ -7,6 +8,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/gpio.h>
+#include <linux/idr.h>
/* Optional implementation infrastructure for GPIO interfaces.
@@ -49,6 +51,13 @@ struct gpio_desc {
#define FLAG_RESERVED 2
#define FLAG_EXPORT 3 /* protected by sysfs_lock */
#define FLAG_SYSFS 4 /* exported via /sys/class/gpio/control */
+#define FLAG_TRIG_FALL 5 /* trigger on falling edge */
+#define FLAG_TRIG_RISE 6 /* trigger on rising edge */
+
+#define PDESC_ID_SHIFT 16 /* add new flags before this one */
+
+#define GPIO_FLAGS_MASK ((1 << PDESC_ID_SHIFT) - 1)
+#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
#ifdef CONFIG_DEBUG_FS
const char *label;
@@ -56,6 +65,15 @@ struct gpio_desc {
};
static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
+#ifdef CONFIG_GPIO_SYSFS
+struct poll_desc {
+ struct work_struct work;
+ struct sysfs_dirent *value_sd;
+};
+
+static struct idr pdesc_idr;
+#endif
+
static inline void desc_set_label(struct gpio_desc *d, const char *label)
{
#ifdef CONFIG_DEBUG_FS
@@ -188,10 +206,10 @@ static DEFINE_MUTEX(sysfs_lock);
* /value
* * always readable, subject to hardware behavior
* * may be writable, as zero/nonzero
- *
- * REVISIT there will likely be an attribute for configuring async
- * notifications, e.g. to specify polling interval or IRQ trigger type
- * that would for example trigger a poll() on the "value".
+ * /edge
+ * * configures behavior of poll(2) on /value
+ * * available only if pin can generate IRQs on input
+ * * is read/write as "none", "falling", "rising", or "both"
*/
static ssize_t gpio_direction_show(struct device *dev,
@@ -288,6 +306,175 @@ static ssize_t gpio_value_store(struct device *dev,
static /*const*/ DEVICE_ATTR(value, 0644,
gpio_value_show, gpio_value_store);
+static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
+{
+ struct work_struct *work = priv;
+
+ schedule_work(work);
+ return IRQ_HANDLED;
+}
+
+static void gpio_notify_sysfs(struct work_struct *work)
+{
+ struct poll_desc *pdesc;
+
+ pdesc = container_of(work, struct poll_desc, work);
+ sysfs_notify_dirent(pdesc->value_sd);
+}
+
+static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
+ unsigned long gpio_flags)
+{
+ struct poll_desc *pdesc;
+ unsigned long irq_flags;
+ int ret, irq, id;
+
+ if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags)
+ return 0;
+
+ irq = gpio_to_irq(desc - gpio_desc);
+ if (irq < 0)
+ return -EIO;
+
+ id = desc->flags >> PDESC_ID_SHIFT;
+ pdesc = idr_find(&pdesc_idr, id);
+ if (pdesc) {
+ free_irq(irq, &pdesc->work);
+ cancel_work_sync(&pdesc->work);
+ }
+
+ desc->flags &= ~GPIO_TRIGGER_MASK;
+
+ if (!gpio_flags) {
+ ret = 0;
+ goto free_sd;
+ }
+
+ irq_flags = IRQF_SHARED;
+ if (test_bit(FLAG_TRIG_FALL, &gpio_flags))
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (test_bit(FLAG_TRIG_RISE, &gpio_flags))
+ irq_flags |= IRQF_TRIGGER_RISING;
+
+ if (!pdesc) {
+ pdesc = kmalloc(sizeof(*pdesc), GFP_KERNEL);
+ if (!pdesc) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ do {
+ ret = -ENOMEM;
+ if (idr_pre_get(&pdesc_idr, GFP_KERNEL))
+ ret = idr_get_new_above(&pdesc_idr,
+ pdesc, 1, &id);
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto free_mem;
+
+ desc->flags &= GPIO_FLAGS_MASK;
+ desc->flags |= (unsigned long)id << PDESC_ID_SHIFT;
+
+ if (desc->flags >> PDESC_ID_SHIFT != id) {
+ ret = -ERANGE;
+ goto free_id;
+ }
+
+ pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
+ if (!pdesc->value_sd) {
+ ret = -ENODEV;
+ goto free_id;
+ }
+ INIT_WORK(&pdesc->work, gpio_notify_sysfs);
+ }
+
+ ret = request_irq(irq, gpio_sysfs_irq, irq_flags,
+ "gpiolib", &pdesc->work);
+ if (ret)
+ goto free_sd;
+
+ desc->flags |= gpio_flags;
+ return 0;
+
+free_sd:
+ sysfs_put(pdesc->value_sd);
+free_id:
+ idr_remove(&pdesc_idr, id);
+ desc->flags &= GPIO_FLAGS_MASK;
+free_mem:
+ kfree(pdesc);
+err_out:
+ return ret;
+}
+
+static const struct {
+ const char *name;
+ unsigned long flags;
+} trigger_types[] = {
+ { "none", 0 },
+ { "falling", BIT(FLAG_TRIG_FALL) },
+ { "rising", BIT(FLAG_TRIG_RISE) },
+ { "both", BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) },
+};
+
+static ssize_t gpio_edge_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ const struct gpio_desc *desc = dev_get_drvdata(dev);
+ ssize_t status;
+
+ mutex_lock(&sysfs_lock);
+
+ if (!test_bit(FLAG_EXPORT, &desc->flags))
+ status = -EIO;
+ else {
+ int i;
+
+ status = 0;
+ for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
+ if ((desc->flags & GPIO_TRIGGER_MASK)
+ == trigger_types[i].flags) {
+ status = sprintf(buf, "%s\n",
+ trigger_types[i].name);
+ break;
+ }
+ }
+
+ mutex_unlock(&sysfs_lock);
+ return status;
+}
+
+static ssize_t gpio_edge_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct gpio_desc *desc = dev_get_drvdata(dev);
+ ssize_t status;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
+ if (sysfs_streq(trigger_types[i].name, buf))
+ goto found;
+ return -EINVAL;
+
+found:
+ mutex_lock(&sysfs_lock);
+
+ if (!test_bit(FLAG_EXPORT, &desc->flags))
+ status = -EIO;
+ else {
+ status = gpio_setup_irq(desc, dev, trigger_types[i].flags);
+ if (!status)
+ status = size;
+ }
+
+ mutex_unlock(&sysfs_lock);
+
+ return status;
+}
+
+static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store);
+
static const struct attribute *gpio_attrs[] = {
&dev_attr_direction.attr,
&dev_attr_value.attr,
@@ -473,7 +660,7 @@ int gpio_export(unsigned gpio, bool direction_may_change)
struct device *dev;
dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%d", gpio);
+ desc, ioname ? ioname : "gpio%d", gpio);
if (dev) {
if (direction_may_change)
status = sysfs_create_group(&dev->kobj,
@@ -481,6 +668,14 @@ int gpio_export(unsigned gpio, bool direction_may_change)
else
status = device_create_file(dev,
&dev_attr_value);
+
+ if (!status && gpio_to_irq(gpio) >= 0
+ && (direction_may_change
+ || !test_bit(FLAG_IS_OUT,
+ &desc->flags)))
+ status = device_create_file(dev,
+ &dev_attr_edge);
+
if (status != 0)
device_unregister(dev);
} else
@@ -505,6 +700,51 @@ static int match_export(struct device *dev, void *data)
}
/**
+ * gpio_export_link - create a sysfs link to an exported GPIO node
+ * @dev: device under which to create symlink
+ * @name: name of the symlink
+ * @gpio: gpio to create symlink to, already exported
+ *
+ * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN
+ * node. Caller is responsible for unlinking.
+ *
+ * Returns zero on success, else an error.
+ */
+int gpio_export_link(struct device *dev, const char *name, unsigned gpio)
+{
+ struct gpio_desc *desc;
+ int status = -EINVAL;
+
+ if (!gpio_is_valid(gpio))
+ goto done;
+
+ mutex_lock(&sysfs_lock);
+
+ desc = &gpio_desc[gpio];
+
+ if (test_bit(FLAG_EXPORT, &desc->flags)) {
+ struct device *tdev;
+
+ tdev = class_find_device(&gpio_class, NULL, desc, match_export);
+ if (tdev != NULL) {
+ status = sysfs_create_link(&dev->kobj, &tdev->kobj,
+ name);
+ } else {
+ status = -ENODEV;
+ }
+ }
+
+ mutex_unlock(&sysfs_lock);
+
+done:
+ if (status)
+ pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(gpio_export_link);
+
+/**
* gpio_unexport - reverse effect of gpio_export()
* @gpio: gpio to make unavailable
*
@@ -527,6 +767,7 @@ void gpio_unexport(unsigned gpio)
dev = class_find_device(&gpio_class, NULL, desc, match_export);
if (dev) {
+ gpio_setup_irq(desc, dev, 0);
clear_bit(FLAG_EXPORT, &desc->flags);
put_device(dev);
device_unregister(dev);
@@ -611,6 +852,8 @@ static int __init gpiolib_sysfs_init(void)
unsigned long flags;
unsigned gpio;
+ idr_init(&pdesc_idr);
+
status = class_register(&gpio_class);
if (status < 0)
return status;
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
new file mode 100644
index 00000000000..5711ce5353c
--- /dev/null
+++ b/drivers/gpio/langwell_gpio.c
@@ -0,0 +1,297 @@
+/* langwell_gpio.c Moorestown platform Langwell chip GPIO driver
+ * Copyright (c) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Moorestown platform Langwell chip.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+struct lnw_gpio_register {
+ u32 GPLR[2];
+ u32 GPDR[2];
+ u32 GPSR[2];
+ u32 GPCR[2];
+ u32 GRER[2];
+ u32 GFER[2];
+ u32 GEDR[2];
+};
+
+struct lnw_gpio {
+ struct gpio_chip chip;
+ struct lnw_gpio_register *reg_base;
+ spinlock_t lock;
+ unsigned irq_base;
+};
+
+static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ u8 reg = offset / 32;
+ void __iomem *gplr;
+
+ gplr = (void __iomem *)(&lnw->reg_base->GPLR[reg]);
+ return readl(gplr) & BIT(offset % 32);
+}
+
+static void lnw_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ u8 reg = offset / 32;
+ void __iomem *gpsr, *gpcr;
+
+ if (value) {
+ gpsr = (void __iomem *)(&lnw->reg_base->GPSR[reg]);
+ writel(BIT(offset % 32), gpsr);
+ } else {
+ gpcr = (void __iomem *)(&lnw->reg_base->GPCR[reg]);
+ writel(BIT(offset % 32), gpcr);
+ }
+}
+
+static int lnw_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ u8 reg = offset / 32;
+ u32 value;
+ unsigned long flags;
+ void __iomem *gpdr;
+
+ gpdr = (void __iomem *)(&lnw->reg_base->GPDR[reg]);
+ spin_lock_irqsave(&lnw->lock, flags);
+ value = readl(gpdr);
+ value &= ~BIT(offset % 32);
+ writel(value, gpdr);
+ spin_unlock_irqrestore(&lnw->lock, flags);
+ return 0;
+}
+
+static int lnw_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ u8 reg = offset / 32;
+ unsigned long flags;
+ void __iomem *gpdr;
+
+ lnw_gpio_set(chip, offset, value);
+ gpdr = (void __iomem *)(&lnw->reg_base->GPDR[reg]);
+ spin_lock_irqsave(&lnw->lock, flags);
+ value = readl(gpdr);
+ value |= BIT(offset % 32);;
+ writel(value, gpdr);
+ spin_unlock_irqrestore(&lnw->lock, flags);
+ return 0;
+}
+
+static int lnw_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ return lnw->irq_base + offset;
+}
+
+static int lnw_irq_type(unsigned irq, unsigned type)
+{
+ struct lnw_gpio *lnw = get_irq_chip_data(irq);
+ u32 gpio = irq - lnw->irq_base;
+ u8 reg = gpio / 32;
+ unsigned long flags;
+ u32 value;
+ void __iomem *grer = (void __iomem *)(&lnw->reg_base->GRER[reg]);
+ void __iomem *gfer = (void __iomem *)(&lnw->reg_base->GFER[reg]);
+
+ if (gpio < 0 || gpio > lnw->chip.ngpio)
+ return -EINVAL;
+ spin_lock_irqsave(&lnw->lock, flags);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ value = readl(grer) | BIT(gpio % 32);
+ else
+ value = readl(grer) & (~BIT(gpio % 32));
+ writel(value, grer);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ value = readl(gfer) | BIT(gpio % 32);
+ else
+ value = readl(gfer) & (~BIT(gpio % 32));
+ writel(value, gfer);
+ spin_unlock_irqrestore(&lnw->lock, flags);
+
+ return 0;
+};
+
+static void lnw_irq_unmask(unsigned irq)
+{
+ struct lnw_gpio *lnw = get_irq_chip_data(irq);
+ u32 gpio = irq - lnw->irq_base;
+ u8 reg = gpio / 32;
+ void __iomem *gedr;
+
+ gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]);
+ writel(BIT(gpio % 32), gedr);
+};
+
+static void lnw_irq_mask(unsigned irq)
+{
+};
+
+static struct irq_chip lnw_irqchip = {
+ .name = "LNW-GPIO",
+ .mask = lnw_irq_mask,
+ .unmask = lnw_irq_unmask,
+ .set_type = lnw_irq_type,
+};
+
+static struct pci_device_id lnw_gpio_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f) },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, lnw_gpio_ids);
+
+static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct lnw_gpio *lnw = (struct lnw_gpio *)get_irq_data(irq);
+ u32 reg, gpio;
+ void __iomem *gedr;
+ u32 gedr_v;
+
+ /* check GPIO controller to check which pin triggered the interrupt */
+ for (reg = 0; reg < lnw->chip.ngpio / 32; reg++) {
+ gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]);
+ gedr_v = readl(gedr);
+ if (!gedr_v)
+ continue;
+ for (gpio = reg*32; gpio < reg*32+32; gpio++) {
+ gedr_v = readl(gedr);
+ if (gedr_v & BIT(gpio % 32)) {
+ pr_debug("pin %d triggered\n", gpio);
+ generic_handle_irq(lnw->irq_base + gpio);
+ }
+ }
+ /* clear the edge detect status bit */
+ writel(gedr_v, gedr);
+ }
+ desc->chip->eoi(irq);
+}
+
+static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ void *base;
+ int i;
+ resource_size_t start, len;
+ struct lnw_gpio *lnw;
+ u32 irq_base;
+ u32 gpio_base;
+ int retval = 0;
+
+ retval = pci_enable_device(pdev);
+ if (retval)
+ goto done;
+
+ retval = pci_request_regions(pdev, "langwell_gpio");
+ if (retval) {
+ dev_err(&pdev->dev, "error requesting resources\n");
+ goto err2;
+ }
+ /* get the irq_base from bar1 */
+ start = pci_resource_start(pdev, 1);
+ len = pci_resource_len(pdev, 1);
+ base = ioremap_nocache(start, len);
+ if (!base) {
+ dev_err(&pdev->dev, "error mapping bar1\n");
+ goto err3;
+ }
+ irq_base = *(u32 *)base;
+ gpio_base = *((u32 *)base + 1);
+ /* release the IO mapping, since we already get the info from bar1 */
+ iounmap(base);
+ /* get the register base from bar0 */
+ start = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ base = ioremap_nocache(start, len);
+ if (!base) {
+ dev_err(&pdev->dev, "error mapping bar0\n");
+ retval = -EFAULT;
+ goto err3;
+ }
+
+ lnw = kzalloc(sizeof(struct lnw_gpio), GFP_KERNEL);
+ if (!lnw) {
+ dev_err(&pdev->dev, "can't allocate langwell_gpio chip data\n");
+ retval = -ENOMEM;
+ goto err4;
+ }
+ lnw->reg_base = base;
+ lnw->irq_base = irq_base;
+ lnw->chip.label = dev_name(&pdev->dev);
+ lnw->chip.direction_input = lnw_gpio_direction_input;
+ lnw->chip.direction_output = lnw_gpio_direction_output;
+ lnw->chip.get = lnw_gpio_get;
+ lnw->chip.set = lnw_gpio_set;
+ lnw->chip.to_irq = lnw_gpio_to_irq;
+ lnw->chip.base = gpio_base;
+ lnw->chip.ngpio = 64;
+ lnw->chip.can_sleep = 0;
+ pci_set_drvdata(pdev, lnw);
+ retval = gpiochip_add(&lnw->chip);
+ if (retval) {
+ dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
+ goto err5;
+ }
+ set_irq_data(pdev->irq, lnw);
+ set_irq_chained_handler(pdev->irq, lnw_irq_handler);
+ for (i = 0; i < lnw->chip.ngpio; i++) {
+ set_irq_chip_and_handler_name(i + lnw->irq_base, &lnw_irqchip,
+ handle_simple_irq, "demux");
+ set_irq_chip_data(i + lnw->irq_base, lnw);
+ }
+
+ spin_lock_init(&lnw->lock);
+ goto done;
+err5:
+ kfree(lnw);
+err4:
+ iounmap(base);
+err3:
+ pci_release_regions(pdev);
+err2:
+ pci_disable_device(pdev);
+done:
+ return retval;
+}
+
+static struct pci_driver lnw_gpio_driver = {
+ .name = "langwell_gpio",
+ .id_table = lnw_gpio_ids,
+ .probe = lnw_gpio_probe,
+};
+
+static int __init lnw_gpio_init(void)
+{
+ return pci_register_driver(&lnw_gpio_driver);
+}
+
+device_initcall(lnw_gpio_init);
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 7b82eaae262..480956f1ca5 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -339,3 +339,4 @@ module_exit(max7301_exit);
MODULE_AUTHOR("Juergen Beisert");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MAX7301 SPI based GPIO-Expander");
+MODULE_ALIAS("spi:" DRIVER_NAME);
diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/mc33880.c
new file mode 100644
index 00000000000..e7d01bd8fdb
--- /dev/null
+++ b/drivers/gpio/mc33880.c
@@ -0,0 +1,196 @@
+/*
+ * mc33880.c MC33880 high-side/low-side switch GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Freescale MC33880 high-side/low-side switch
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mc33880.h>
+#include <linux/gpio.h>
+
+#define DRIVER_NAME "mc33880"
+
+/*
+ * Pin configurations, see MAX7301 datasheet page 6
+ */
+#define PIN_CONFIG_MASK 0x03
+#define PIN_CONFIG_IN_PULLUP 0x03
+#define PIN_CONFIG_IN_WO_PULLUP 0x02
+#define PIN_CONFIG_OUT 0x01
+
+#define PIN_NUMBER 8
+
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory
+ */
+struct mc33880 {
+ struct mutex lock; /* protect from simultanous accesses */
+ u8 port_config;
+ struct gpio_chip chip;
+ struct spi_device *spi;
+};
+
+static int mc33880_write_config(struct mc33880 *mc)
+{
+ return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
+}
+
+
+static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
+{
+ if (value)
+ mc->port_config |= 1 << offset;
+ else
+ mc->port_config &= ~(1 << offset);
+
+ return mc33880_write_config(mc);
+}
+
+
+static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mc33880 *mc = container_of(chip, struct mc33880, chip);
+
+ mutex_lock(&mc->lock);
+
+ __mc33880_set(mc, offset, value);
+
+ mutex_unlock(&mc->lock);
+}
+
+static int __devinit mc33880_probe(struct spi_device *spi)
+{
+ struct mc33880 *mc;
+ struct mc33880_platform_data *pdata;
+ int ret;
+
+ pdata = spi->dev.platform_data;
+ if (!pdata || !pdata->base) {
+ dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+ return -EINVAL;
+ }
+
+ /*
+ * bits_per_word cannot be configured in platform data
+ */
+ spi->bits_per_word = 8;
+
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ mc = kzalloc(sizeof(struct mc33880), GFP_KERNEL);
+ if (!mc)
+ return -ENOMEM;
+
+ mutex_init(&mc->lock);
+
+ dev_set_drvdata(&spi->dev, mc);
+
+ mc->spi = spi;
+
+ mc->chip.label = DRIVER_NAME,
+ mc->chip.set = mc33880_set;
+ mc->chip.base = pdata->base;
+ mc->chip.ngpio = PIN_NUMBER;
+ mc->chip.can_sleep = 1;
+ mc->chip.dev = &spi->dev;
+ mc->chip.owner = THIS_MODULE;
+
+ mc->port_config = 0x00;
+ /* write twice, because during initialisation the first setting
+ * is just for testing SPI communication, and the second is the
+ * "real" configuration
+ */
+ ret = mc33880_write_config(mc);
+ mc->port_config = 0x00;
+ if (!ret)
+ ret = mc33880_write_config(mc);
+
+ if (ret) {
+ printk(KERN_ERR "Failed writing to " DRIVER_NAME ": %d\n", ret);
+ goto exit_destroy;
+ }
+
+ ret = gpiochip_add(&mc->chip);
+ if (ret)
+ goto exit_destroy;
+
+ return ret;
+
+exit_destroy:
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_destroy(&mc->lock);
+ kfree(mc);
+ return ret;
+}
+
+static int mc33880_remove(struct spi_device *spi)
+{
+ struct mc33880 *mc;
+ int ret;
+
+ mc = dev_get_drvdata(&spi->dev);
+ if (mc == NULL)
+ return -ENODEV;
+
+ dev_set_drvdata(&spi->dev, NULL);
+
+ ret = gpiochip_remove(&mc->chip);
+ if (!ret) {
+ mutex_destroy(&mc->lock);
+ kfree(mc);
+ } else
+ dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
+ ret);
+
+ return ret;
+}
+
+static struct spi_driver mc33880_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mc33880_probe,
+ .remove = __devexit_p(mc33880_remove),
+};
+
+static int __init mc33880_init(void)
+{
+ return spi_register_driver(&mc33880_driver);
+}
+/* register after spi postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(mc33880_init);
+
+static void __exit mc33880_exit(void)
+{
+ spi_unregister_driver(&mc33880_driver);
+}
+module_exit(mc33880_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index f6fae0e50e6..cd651ec8d03 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -6,12 +6,10 @@
#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
-
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/mcp23s08.h>
-#include <asm/gpio.h>
-
/* Registers are all 8 bits wide.
*
@@ -433,3 +431,4 @@ static void __exit mcp23s08_exit(void)
module_exit(mcp23s08_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:mcp23s08");
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index cdb6574d25a..6a2fb3fbb3d 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#ifdef CONFIG_OF_GPIO
@@ -20,8 +21,6 @@
#include <linux/of_gpio.h>
#endif
-#include <asm/gpio.h>
-
#define PCA953X_INPUT 0
#define PCA953X_OUTPUT 1
#define PCA953X_INVERT 2
@@ -40,6 +39,7 @@ static const struct i2c_device_id pca953x_id[] = {
{ "pca9557", 8, },
{ "max7310", 8, },
+ { "max7315", 8, },
{ "pca6107", 8, },
{ "tca6408", 8, },
{ "tca6416", 16, },
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 9525724be73..29f19ce3e80 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -20,14 +20,14 @@
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
-#include <asm/gpio.h>
-
static const struct i2c_device_id pcf857x_id[] = {
{ "pcf8574", 8 },
+ { "pcf8574a", 8 },
{ "pca8574", 8 },
{ "pca9670", 8 },
{ "pca9672", 8 },
diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/ucb1400_gpio.c
new file mode 100644
index 00000000000..50e6bd1392c
--- /dev/null
+++ b/drivers/gpio/ucb1400_gpio.c
@@ -0,0 +1,125 @@
+/*
+ * Philips UCB1400 GPIO driver
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+struct ucb1400_gpio_data *ucbdata;
+
+static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_direction(gpio->ac97, off, 0);
+ return 0;
+}
+
+static int ucb1400_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_direction(gpio->ac97, off, 1);
+ ucb1400_gpio_set_value(gpio->ac97, off, val);
+ return 0;
+}
+
+static int ucb1400_gpio_get(struct gpio_chip *gc, unsigned off)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ return ucb1400_gpio_get_value(gpio->ac97, off);
+}
+
+static void ucb1400_gpio_set(struct gpio_chip *gc, unsigned off, int val)
+{
+ struct ucb1400_gpio *gpio;
+ gpio = container_of(gc, struct ucb1400_gpio, gc);
+ ucb1400_gpio_set_value(gpio->ac97, off, val);
+}
+
+static int ucb1400_gpio_probe(struct platform_device *dev)
+{
+ struct ucb1400_gpio *ucb = dev->dev.platform_data;
+ int err = 0;
+
+ if (!(ucbdata && ucbdata->gpio_offset)) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ platform_set_drvdata(dev, ucb);
+
+ ucb->gc.label = "ucb1400_gpio";
+ ucb->gc.base = ucbdata->gpio_offset;
+ ucb->gc.ngpio = 10;
+ ucb->gc.owner = THIS_MODULE;
+
+ ucb->gc.direction_input = ucb1400_gpio_dir_in;
+ ucb->gc.direction_output = ucb1400_gpio_dir_out;
+ ucb->gc.get = ucb1400_gpio_get;
+ ucb->gc.set = ucb1400_gpio_set;
+ ucb->gc.can_sleep = 1;
+
+ err = gpiochip_add(&ucb->gc);
+ if (err)
+ goto err;
+
+ if (ucbdata && ucbdata->gpio_setup)
+ err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+
+err:
+ return err;
+
+}
+
+static int ucb1400_gpio_remove(struct platform_device *dev)
+{
+ int err = 0;
+ struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
+
+ if (ucbdata && ucbdata->gpio_teardown) {
+ err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+ if (err)
+ return err;
+ }
+
+ err = gpiochip_remove(&ucb->gc);
+ return err;
+}
+
+static struct platform_driver ucb1400_gpio_driver = {
+ .probe = ucb1400_gpio_probe,
+ .remove = ucb1400_gpio_remove,
+ .driver = {
+ .name = "ucb1400_gpio"
+ },
+};
+
+static int __init ucb1400_gpio_init(void)
+{
+ return platform_driver_register(&ucb1400_gpio_driver);
+}
+
+static void __exit ucb1400_gpio_exit(void)
+{
+ platform_driver_unregister(&ucb1400_gpio_driver);
+}
+
+void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
+{
+ ucbdata = data;
+}
+
+module_init(ucb1400_gpio_init);
+module_exit(ucb1400_gpio_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
new file mode 100644
index 00000000000..f9c09a54ec7
--- /dev/null
+++ b/drivers/gpio/wm831x-gpio.c
@@ -0,0 +1,252 @@
+/*
+ * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#define WM831X_GPIO_MAX 16
+
+struct wm831x_gpio {
+ struct wm831x *wm831x;
+ struct gpio_chip gpio_chip;
+};
+
+static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct wm831x_gpio, gpio_chip);
+}
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI,
+ WM831X_GPN_DIR);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+ if (ret < 0)
+ return ret;
+
+ if (ret & 1 << offset)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+ value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ int gpio = i + chip->base;
+ int reg;
+ const char *label, *pull, *powerdomain;
+
+ /* We report the GPIO even if it's not requested since
+ * we're also reporting things like alternate
+ * functions which apply even when the GPIO is not in
+ * use as a GPIO.
+ */
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ label = "Unrequested";
+
+ seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+ reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+ if (reg < 0) {
+ dev_err(wm831x->dev,
+ "GPIO control %d read failed: %d\n",
+ gpio, reg);
+ seq_printf(s, "\n");
+ continue;
+ }
+
+ switch (reg & WM831X_GPN_PULL_MASK) {
+ case WM831X_GPIO_PULL_NONE:
+ pull = "nopull";
+ break;
+ case WM831X_GPIO_PULL_DOWN:
+ pull = "pulldown";
+ break;
+ case WM831X_GPIO_PULL_UP:
+ pull = "pullup";
+ default:
+ pull = "INVALID PULL";
+ break;
+ }
+
+ switch (i + 1) {
+ case 1 ... 3:
+ case 7 ... 9:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "VPMIC";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 4 ... 6:
+ case 10 ... 12:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "SYSVDD";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 13 ... 16:
+ powerdomain = "TPVDD";
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ seq_printf(s, " %s %s %s %s%s\n"
+ " %s%s (0x%4x)\n",
+ reg & WM831X_GPN_DIR ? "in" : "out",
+ wm831x_gpio_get(chip, i) ? "high" : "low",
+ pull,
+ powerdomain,
+ reg & WM831X_GPN_POL ? " inverted" : "",
+ reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
+ reg & WM831X_GPN_TRI ? " tristated" : "",
+ reg);
+ }
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip template_chip = {
+ .label = "wm831x",
+ .owner = THIS_MODULE,
+ .direction_input = wm831x_gpio_direction_in,
+ .get = wm831x_gpio_get,
+ .direction_output = wm831x_gpio_direction_out,
+ .set = wm831x_gpio_set,
+ .dbg_show = wm831x_gpio_dbg_show,
+ .can_sleep = 1,
+};
+
+static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_gpio *wm831x_gpio;
+ int ret;
+
+ wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
+ if (wm831x_gpio == NULL)
+ return -ENOMEM;
+
+ wm831x_gpio->wm831x = wm831x;
+ wm831x_gpio->gpio_chip = template_chip;
+ wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+ wm831x_gpio->gpio_chip.dev = &pdev->dev;
+ if (pdata && pdata->gpio_base)
+ wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+ else
+ wm831x_gpio->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&wm831x_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+ ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, wm831x_gpio);
+
+ return ret;
+
+err:
+ kfree(wm831x_gpio);
+ return ret;
+}
+
+static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+{
+ struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
+ if (ret == 0)
+ kfree(wm831x_gpio);
+
+ return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+ .driver.name = "wm831x-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = wm831x_gpio_probe,
+ .remove = __devexit_p(wm831x_gpio_remove),
+};
+
+static int __init wm831x_gpio_init(void)
+{
+ return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+ platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");