diff options
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-acorn.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 8 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ibm_iic.c | 6 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-iop3xx.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mpc.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mv64xxx.c | 7 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-nforce2.c | 12 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 47 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pca-isa.c | 39 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pca-platform.c | 48 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 77 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-powermac.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-versatile.c | 10 |
15 files changed, 194 insertions, 89 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7f95905bbb9..da809ad0996 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -132,6 +132,7 @@ config I2C_PIIX4 Serverworks CSB5 Serverworks CSB6 Serverworks HT-1000 + Serverworks HT-1100 SMSC Victory66 This driver can also be built as a module. If so, the module @@ -617,12 +618,12 @@ config I2C_ELEKTOR will be called i2c-elektor. config I2C_PCA_ISA - tristate "PCA9564 on an ISA bus" + tristate "PCA9564/PCA9665 on an ISA bus" depends on ISA select I2C_ALGOPCA default n help - This driver supports ISA boards using the Philips PCA9564 + This driver supports ISA boards using the Philips PCA9564/PCA9665 parallel bus to I2C bus controller. This driver can also be built as a module. If so, the module @@ -634,11 +635,11 @@ config I2C_PCA_ISA time). If unsure, say N. config I2C_PCA_PLATFORM - tristate "PCA9564 as platform device" + tristate "PCA9564/PCA9665 as platform device" select I2C_ALGOPCA default n help - This driver supports a memory mapped Philips PCA9564 + This driver supports a memory mapped Philips PCA9564/PCA9665 parallel bus to I2C bus controller. This driver can also be built as a module. If so, the module diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 9aefb5e5864..86796488ef4 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -15,9 +15,9 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/io.h> #include <asm/hardware/ioc.h> #include <asm/system.h> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 5d7789834b9..3fae3a91ce5 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -216,7 +216,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev, { unsigned long timeout; - timeout = jiffies + DAVINCI_I2C_TIMEOUT; + timeout = jiffies + dev->adapter.timeout; while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB) { if (time_after(jiffies, timeout)) { @@ -289,7 +289,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - DAVINCI_I2C_TIMEOUT); + dev->adapter.timeout); if (r == 0) { dev_err(dev->dev, "controller timed out\n"); i2c_davinci_init(dev); @@ -546,9 +546,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name)); adap->algo = &i2c_davinci_algo; adap->dev.parent = &pdev->dev; - - /* FIXME */ - adap->timeout = 1; + adap->timeout = DAVINCI_I2C_TIMEOUT; adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 88f0db73b36..8b92a4666e0 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -415,7 +415,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){ if (dev->irq >= 0){ /* Interrupt mode */ ret = wait_event_interruptible_timeout(dev->wq, - !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ); + !(in_8(&iic->sts) & STS_PT), dev->adap.timeout); if (unlikely(ret < 0)) DBG("%d: wait interrupted\n", dev->idx); @@ -426,7 +426,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){ } else { /* Polling mode */ - unsigned long x = jiffies + dev->adap.timeout * HZ; + unsigned long x = jiffies + dev->adap.timeout; while (in_8(&iic->sts) & STS_PT){ if (unlikely(time_after(jiffies, x))){ @@ -748,7 +748,7 @@ static int __devinit iic_probe(struct of_device *ofdev, i2c_set_adapdata(adap, dev); adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; - adap->timeout = 1; + adap->timeout = HZ; ret = i2c_add_adapter(adap); if (ret < 0) { diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 3190690c26c..a75c75e77b9 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -488,7 +488,7 @@ iop3xx_i2c_probe(struct platform_device *pdev) /* * Default values...should these come in from board code? */ - new_adapter->timeout = 100; + new_adapter->timeout = HZ; new_adapter->algo = &iop3xx_i2c_algo; init_waitqueue_head(&adapter_data->waitq); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 3163eab3f60..26bf3701058 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -116,7 +116,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) } else { /* Interrupt mode */ result = wait_event_timeout(i2c->queue, - (i2c->interrupt & CSR_MIF), timeout * HZ); + (i2c->interrupt & CSR_MIF), timeout); if (unlikely(!(i2c->interrupt & CSR_MIF))) { pr_debug("I2C: wait timeout\n"); @@ -308,7 +308,7 @@ static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, .name = "MPC adapter", .algo = &mpc_algo, - .timeout = 1, + .timeout = HZ, }; static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match) diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 7f186bbcb99..5a4945d1dba 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -358,7 +358,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) char abort = 0; time_left = wait_event_interruptible_timeout(drv_data->waitq, - !drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout)); + !drv_data->block, drv_data->adapter.timeout); spin_lock_irqsave(&drv_data->lock, flags); if (!time_left) { /* Timed out */ @@ -374,8 +374,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) spin_unlock_irqrestore(&drv_data->lock, flags); time_left = wait_event_timeout(drv_data->waitq, - !drv_data->block, - msecs_to_jiffies(drv_data->adapter.timeout)); + !drv_data->block, drv_data->adapter.timeout); if ((time_left <= 0) && drv_data->block) { drv_data->state = MV64XXX_I2C_STATE_IDLE; @@ -530,7 +529,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - drv_data->adapter.timeout = pdata->timeout; + drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); drv_data->adapter.nr = pd->id; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 05af6cd7f27..2ff4683703a 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -31,10 +31,14 @@ nForce3 250Gb MCP 00E4 nForce4 MCP 0052 nForce4 MCP-04 0034 - nForce4 MCP51 0264 - nForce4 MCP55 0368 + nForce MCP51 0264 + nForce MCP55 0368 nForce MCP61 03EB nForce MCP65 0446 + nForce MCP67 0542 + nForce MCP73 07D8 + nForce MCP78S 0752 + nForce MCP79 0AA2 This driver supports the 2 SMBuses that are included in the MCP of the nForce2/3/4/5xx chipsets. @@ -315,6 +319,10 @@ static struct pci_device_id nforce2_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS) }, { 0 } }; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index be8ee2cac8b..ece0125a1ee 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) { - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - dev->iclk = clk_get(dev->dev, "i2c_ick"); - if (IS_ERR(dev->iclk)) { - dev->iclk = NULL; - return -ENODEV; - } + int ret; + + dev->iclk = clk_get(dev->dev, "ick"); + if (IS_ERR(dev->iclk)) { + ret = PTR_ERR(dev->iclk); + dev->iclk = NULL; + return ret; } - dev->fclk = clk_get(dev->dev, "i2c_fck"); + dev->fclk = clk_get(dev->dev, "fck"); if (IS_ERR(dev->fclk)) { + ret = PTR_ERR(dev->fclk); if (dev->iclk != NULL) { clk_put(dev->iclk); dev->iclk = NULL; } dev->fclk = NULL; - return -ENODEV; + return ret; } return 0; @@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) { clk_put(dev->fclk); dev->fclk = NULL; - if (dev->iclk != NULL) { - clk_put(dev->iclk); - dev->iclk = NULL; - } + clk_put(dev->iclk); + dev->iclk = NULL; } static void omap_i2c_unidle(struct omap_i2c_dev *dev) { WARN_ON(!dev->idle); - if (dev->iclk != NULL) - clk_enable(dev->iclk); + clk_enable(dev->iclk); clk_enable(dev->fclk); dev->idle = 0; if (dev->iestate) @@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) } dev->idle = 1; clk_disable(dev->fclk); - if (dev->iclk != NULL) - clk_disable(dev->iclk); + clk_disable(dev->iclk); } static int omap_i2c_init(struct omap_i2c_dev *dev) @@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); if (cpu_class_is_omap1()) { - struct clk *armxor_ck; - - armxor_ck = clk_get(NULL, "armxor_ck"); - if (IS_ERR(armxor_ck)) - dev_warn(dev->dev, "Could not get armxor_ck\n"); - else { - fclk_rate = clk_get_rate(armxor_ck); - clk_put(armxor_ck); - } + /* + * The I2C functional clock is the armxor_ck, so there's + * no need to get "armxor_ck" separately. Now, if OMAP2420 + * always returns 12MHz for the functional clock, we can + * do this bit unconditionally. + */ + fclk_rate = clk_get_rate(dev->fclk); + /* TRM for 5912 says the I2C clock must be prescaled to be * between 7 - 12 MHz. The XOR input clock is typically * 12, 13 or 19.2 MHz. So we should have code that produces: diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 4aa8138cb0a..0ed68e2ccd2 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/delay.h> +#include <linux/jiffies.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/wait.h> @@ -41,15 +42,17 @@ static int irq = -1; /* Data sheet recommends 59kHz for 100kHz operation due to variation * in the actual clock rate */ -static int clock = I2C_PCA_CON_59kHz; +static int clock = 59000; +static struct i2c_adapter pca_isa_ops; static wait_queue_head_t pca_wait; static void pca_isa_writebyte(void *pd, int reg, int val) { #ifdef DEBUG_IO static char *names[] = { "T/O", "DAT", "ADR", "CON" }; - printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val); + printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg], + base+reg, val); #endif outb(val, base+reg); } @@ -60,7 +63,7 @@ static int pca_isa_readbyte(void *pd, int reg) #ifdef DEBUG_IO { static char *names[] = { "STA", "DAT", "ADR", "CON" }; - printk("*** read %s => %#04x\n", names[reg], res); + printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res); } #endif return res; @@ -68,16 +71,22 @@ static int pca_isa_readbyte(void *pd, int reg) static int pca_isa_waitforcompletion(void *pd) { - int ret = 0; + long ret = ~0; + unsigned long timeout; if (irq > -1) { - ret = wait_event_interruptible(pca_wait, - pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI); + ret = wait_event_interruptible_timeout(pca_wait, + pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI, pca_isa_ops.timeout); } else { - while ((pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + /* Do polling */ + timeout = jiffies + pca_isa_ops.timeout; + while (((pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI) == 0) + && (ret = time_before(jiffies, timeout))) udelay(100); } - return ret; + return ret > 0; } static void pca_isa_resetchip(void *pd) @@ -102,8 +111,8 @@ static struct i2c_algo_pca_data pca_isa_data = { static struct i2c_adapter pca_isa_ops = { .owner = THIS_MODULE, .algo_data = &pca_isa_data, - .name = "PCA9564 ISA Adapter", - .timeout = 100, + .name = "PCA9564/PCA9665 ISA Adapter", + .timeout = HZ, }; static int __devinit pca_isa_match(struct device *dev, unsigned int id) @@ -195,7 +204,7 @@ static void __exit pca_isa_exit(void) } MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); -MODULE_DESCRIPTION("ISA base PCA9564 driver"); +MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver"); MODULE_LICENSE("GPL"); module_param(base, ulong, 0); @@ -204,7 +213,13 @@ MODULE_PARM_DESC(base, "I/O base address"); module_param(irq, int, 0); MODULE_PARM_DESC(irq, "IRQ"); module_param(clock, int, 0); -MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet"); +MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t" + "For PCA9564: 330000,288000,217000,146000," + "88000,59000,44000,36000\n" + "\t\tFor PCA9665:\tStandard: 60300 - 100099\n" + "\t\t\t\tFast: 100100 - 400099\n" + "\t\t\t\tFast+: 400100 - 10000099\n" + "\t\t\t\tTurbo: Up to 1265800"); module_init(pca_isa_init); module_exit(pca_isa_exit); diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 6bb15ad0a6b..7b23891b7d5 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/jiffies.h> #include <linux/errno.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -81,24 +82,23 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val) static int i2c_pca_pf_waitforcompletion(void *pd) { struct i2c_pca_pf_data *i2c = pd; - int ret = 0; + long ret = ~0; + unsigned long timeout; if (i2c->irq) { - ret = wait_event_interruptible(i2c->wait, + ret = wait_event_interruptible_timeout(i2c->wait, i2c->algo_data.read_byte(i2c, I2C_PCA_CON) - & I2C_PCA_CON_SI); + & I2C_PCA_CON_SI, i2c->adap.timeout); } else { - /* - * Do polling... - * XXX: Could get stuck in extreme cases! - * Maybe add timeout, but using irqs is preferred anyhow. - */ - while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) + /* Do polling */ + timeout = jiffies + i2c->adap.timeout; + while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + && (ret = time_before(jiffies, timeout))) udelay(100); } - return ret; + return ret > 0; } static void i2c_pca_pf_dummyreset(void *pd) @@ -172,14 +172,25 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; i2c->adap.owner = THIS_MODULE; - snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx", - (unsigned long) res->start); + snprintf(i2c->adap.name, sizeof(i2c->adap.name), + "PCA9564/PCA9665 at 0x%08lx", + (unsigned long) res->start); i2c->adap.algo_data = &i2c->algo_data; i2c->adap.dev.parent = &pdev->dev; - i2c->adap.timeout = platform_data->timeout; - i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed; + if (platform_data) { + i2c->adap.timeout = platform_data->timeout; + i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed; + i2c->gpio = platform_data->gpio; + } else { + i2c->adap.timeout = HZ; + i2c->algo_data.i2c_clock = 59000; + i2c->gpio = -1; + } + i2c->algo_data.data = i2c; + i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion; + i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { case IORESOURCE_MEM_32BIT: @@ -197,11 +208,6 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) break; } - i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion; - - i2c->gpio = platform_data->gpio; - i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; - /* Use gpio_is_valid() when in mainline */ if (i2c->gpio > -1) { ret = gpio_request(i2c->gpio, i2c->adap.name); @@ -246,7 +252,7 @@ e_remap: e_alloc: release_mem_region(res->start, res_len(res)); e_print: - printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret); + printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret); return ret; } @@ -290,7 +296,7 @@ static void __exit i2c_pca_pf_exit(void) } MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); -MODULE_DESCRIPTION("I2C-PCA9564 platform driver"); +MODULE_DESCRIPTION("I2C-PCA9564/PCA9665 platform driver"); MODULE_LICENSE("GPL"); module_init(i2c_pca_pf_init); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 761f9dd5362..0249a7d762b 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -20,7 +20,7 @@ /* Supports: Intel PIIX4, 440MX - Serverworks OSB4, CSB5, CSB6, HT-1000 + Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 SMSC Victory66 @@ -226,6 +226,70 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, return 0; } +static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id) +{ + unsigned short smba_idx = 0xcd6; + u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; + + /* SB800 SMBus does not support forcing address */ + if (force || force_addr) { + dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + "forcing address!\n"); + return -EINVAL; + } + + /* Determine the address of the SMBus areas */ + if (!request_region(smba_idx, 2, "smba_idx")) { + dev_err(&PIIX4_dev->dev, "SMBus base address index region " + "0x%x already in use!\n", smba_idx); + return -EBUSY; + } + outb_p(smb_en, smba_idx); + smba_en_lo = inb_p(smba_idx + 1); + outb_p(smb_en + 1, smba_idx); + smba_en_hi = inb_p(smba_idx + 1); + release_region(smba_idx, 2); + + if ((smba_en_lo & 1) == 0) { + dev_err(&PIIX4_dev->dev, + "Host SMBus controller not enabled!\n"); + return -ENODEV; + } + + piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -EBUSY; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", + piix4_smba); + return -EBUSY; + } + + /* Request the SMBus I2C bus config region */ + if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { + dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " + "0x%x already in use!\n", piix4_smba + i2ccfg_offset); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + return -EBUSY; + } + i2ccfg = inb_p(piix4_smba + i2ccfg_offset); + release_region(piix4_smba + i2ccfg_offset, 1); + + if (i2ccfg & 1) + dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n"); + else + dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n"); + + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x, revision %d\n", + piix4_smba, i2ccfg >> 4); + + return 0; +} + static int piix4_transaction(void) { int temp; @@ -423,6 +487,8 @@ static struct pci_device_id piix4_ids[] = { PCI_DEVICE_ID_SERVERWORKS_CSB6) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, { 0, } }; @@ -433,7 +499,14 @@ static int __devinit piix4_probe(struct pci_dev *dev, { int retval; - retval = piix4_setup(dev, id); + if ((dev->vendor == PCI_VENDOR_ID_ATI) && + (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) && + (dev->revision >= 0x40)) + /* base address location etc changed in SB800 */ + retval = piix4_setup_sb800(dev, id); + else + retval = piix4_setup(dev, id); + if (retval) return retval; diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 60ca91745e5..3c9d71f6018 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -191,7 +191,8 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev) i2c_set_adapdata(adapter, NULL); /* We aren't that prepared to deal with this... */ if (rc) - printk("i2c-powermac.c: Failed to remove bus %s !\n", + printk(KERN_WARNING + "i2c-powermac.c: Failed to remove bus %s !\n", adapter->name); platform_set_drvdata(dev, NULL); kfree(adapter); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index bdb1f7510e9..c1405c8f6ba 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -210,11 +210,12 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) { unsigned int i; - printk("i2c: error: %s\n", why); - printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", + printk(KERN_ERR "i2c: error: %s\n", why); + printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); - printk("i2c: ICR: %08x ISR: %08x\n" - "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c))); + printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n", + readl(_ICR(i2c)), readl(_ISR(i2c))); + printk(KERN_DEBUG "i2c: log: "); for (i = 0; i < i2c->irqlogidx; i++) printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); printk("\n"); diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 4678babd3ce..fede619ba22 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev) i2c->algo = i2c_versatile_algo; i2c->algo.data = i2c; - ret = i2c_bit_add_bus(&i2c->adap); + if (dev->id >= 0) { + /* static bus numbering */ + i2c->adap.nr = dev->id; + ret = i2c_bit_add_numbered_bus(&i2c->adap); + } else + /* dynamic bus numbering */ + ret = i2c_bit_add_bus(&i2c->adap); if (ret >= 0) { platform_set_drvdata(dev, i2c); return 0; @@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void) platform_driver_unregister(&i2c_versatile_driver); } -module_init(i2c_versatile_init); +subsys_initcall(i2c_versatile_init); module_exit(i2c_versatile_exit); MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); |