aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/cmd640.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/cmd640.c')
-rw-r--r--drivers/ide/pci/cmd640.c139
1 files changed, 60 insertions, 79 deletions
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index b38a1980dcd..1ad1e23e310 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -521,21 +521,23 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index)
static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
u8 pio_mode, unsigned int cycle_time)
{
+ struct ide_timing *t;
int setup_time, active_time, recovery_time, clock_time;
u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
int bus_speed;
- if (cmd640_vlb && ide_vlb_clk)
- bus_speed = ide_vlb_clk;
- else if (!cmd640_vlb && ide_pci_clk)
- bus_speed = ide_pci_clk;
+ if (cmd640_vlb)
+ bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
else
- bus_speed = system_bus_clock();
+ bus_speed = ide_pci_clk ? ide_pci_clk : 33;
if (pio_mode > 5)
pio_mode = 5;
- setup_time = ide_pio_timings[pio_mode].setup_time;
- active_time = ide_pio_timings[pio_mode].active_time;
+
+ t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
+ setup_time = t->setup;
+ active_time = t->active;
+
recovery_time = cycle_time - (setup_time + active_time);
clock_time = 1000 / bus_speed;
cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
@@ -609,11 +611,40 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
display_clocks(index);
}
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+static void cmd640_init_dev(ide_drive_t *drive)
+{
+ unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit;
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ /*
+ * Reset timing to the slowest speed and turn off prefetch.
+ * This way, the drive identify code has a better chance.
+ */
+ setup_counts[i] = 4; /* max possible */
+ active_counts[i] = 16; /* max possible */
+ recovery_counts[i] = 16; /* max possible */
+ program_drive_counts(drive, i);
+ set_prefetch_mode(drive, i, 0);
+ printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
+#else
+ /*
+ * Set the drive unmask flags to match the prefetch setting.
+ */
+ check_prefetch(drive, i);
+ printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
+ i, drive->no_io_32bit ? "off" : "on");
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+}
+
static const struct ide_port_ops cmd640_port_ops = {
+ .init_dev = cmd640_init_dev,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
.set_pio_mode = cmd640_set_pio_mode,
+#endif
};
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
static int pci_conf1(void)
{
@@ -656,10 +687,8 @@ static const struct ide_port_info cmd640_port_info __initdata = {
IDE_HFLAG_NO_DMA |
IDE_HFLAG_ABUSE_PREFETCH |
IDE_HFLAG_ABUSE_FAST_DEVSEL,
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
.port_ops = &cmd640_port_ops,
.pio_mask = ATA_PIO5,
-#endif
};
static int cmd640x_init_one(unsigned long base, unsigned long ctl)
@@ -685,12 +714,8 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl)
*/
static int __init cmd640x_init(void)
{
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- int second_port_toggled = 0;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
int second_port_cmd640 = 0, rc;
const char *bus_type, *port2;
- unsigned int index;
u8 b, cfr;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
@@ -776,88 +801,44 @@ static int __init cmd640x_init(void)
put_cmd640_reg(CMDTIM, 0);
put_cmd640_reg(BRST, 0x40);
- cmd_hwif1 = ide_find_port();
+ b = get_cmd640_reg(CNTRL);
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1 &&
- cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
- port2 = "not probed";
+ if (secondary_port_responding()) {
+ if ((b & CNTRL_ENA_2ND)) {
+ second_port_cmd640 = 1;
+ port2 = "okay";
+ } else if (cmd640_vlb) {
+ second_port_cmd640 = 1;
+ port2 = "alive";
+ } else
+ port2 = "not cmd640";
} else {
- b = get_cmd640_reg(CNTRL);
+ put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
+ second_port_cmd640 = 1;
+ port2 = "enabled";
} else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- second_port_toggled = 1;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- port2 = "enabled";
- } else {
- put_cmd640_reg(CNTRL, b); /* restore original setting */
- port2 = "not responding";
- }
+ put_cmd640_reg(CNTRL, b); /* restore original setting */
+ port2 = "not responding";
}
}
/*
* Initialize data for secondary cmd640 port, if enabled
*/
- if (second_port_cmd640 && cmd_hwif1) {
- ide_init_port_hw(cmd_hwif1, &hw[1]);
- idx[1] = cmd_hwif1->index;
+ if (second_port_cmd640) {
+ cmd_hwif1 = ide_find_port();
+ if (cmd_hwif1) {
+ ide_init_port_hw(cmd_hwif1, &hw[1]);
+ idx[1] = cmd_hwif1->index;
+ }
}
printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
second_port_cmd640 ? "" : "not ", port2);
- /*
- * Establish initial timings/prefetch for all drives.
- * Do not unnecessarily disturb any prior BIOS setup of these.
- */
- for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
- ide_drive_t *drive;
-
- if (index > 1) {
- if (cmd_hwif1 == NULL)
- continue;
- drive = &cmd_hwif1->drives[index & 1];
- } else {
- if (cmd_hwif0 == NULL)
- continue;
- drive = &cmd_hwif0->drives[index & 1];
- }
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- /*
- * Reset timing to the slowest speed and turn off prefetch.
- * This way, the drive identify code has a better chance.
- */
- setup_counts [index] = 4; /* max possible */
- active_counts [index] = 16; /* max possible */
- recovery_counts [index] = 16; /* max possible */
- program_drive_counts(drive, index);
- set_prefetch_mode(drive, index, 0);
- printk("cmd640: drive%d timings/prefetch cleared\n", index);
-#else
- /*
- * Set the drive unmask flags to match the prefetch setting
- */
- check_prefetch(drive, index);
- printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
- index, drive->no_io_32bit ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- }
-
#ifdef CMD640_DUMP_REGS
cmd640_dump_regs();
#endif