diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath')
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_common.h | 616 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_debug.h | 96 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_kernel.h | 884 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_registers.h | 446 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ips_common.h | 263 |
5 files changed, 2305 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h new file mode 100644 index 00000000000..48a55247b83 --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -0,0 +1,616 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _IPATH_COMMON_H +#define _IPATH_COMMON_H + +/* + * This file contains defines, structures, etc. that are used + * to communicate between kernel and user code. + */ + +/* This is the IEEE-assigned OUI for PathScale, Inc. */ +#define IPATH_SRC_OUI_1 0x00 +#define IPATH_SRC_OUI_2 0x11 +#define IPATH_SRC_OUI_3 0x75 + +/* version of protocol header (known to chip also). In the long run, + * we should be able to generate and accept a range of version numbers; + * for now we only accept one, and it's compiled in. + */ +#define IPS_PROTO_VERSION 2 + +/* + * These are compile time constants that you may want to enable or disable + * if you are trying to debug problems with code or performance. + * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in + * fastpath code + * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be + * traced in faspath code + * _IPATH_TRACING define as 0 if you want to remove all tracing in a + * compilation unit + * _IPATH_DEBUGGING define as 0 if you want to remove debug prints + */ + +/* + * The value in the BTH QP field that InfiniPath uses to differentiate + * an infinipath protocol IB packet vs standard IB transport + */ +#define IPATH_KD_QP 0x656b79 + +/* + * valid states passed to ipath_set_linkstate() user call + */ +#define IPATH_IB_LINKDOWN 0 +#define IPATH_IB_LINKARM 1 +#define IPATH_IB_LINKACTIVE 2 +#define IPATH_IB_LINKINIT 3 +#define IPATH_IB_LINKDOWN_SLEEP 4 +#define IPATH_IB_LINKDOWN_DISABLE 5 + +/* + * stats maintained by the driver. For now, at least, this is global + * to all minor devices. + */ +struct infinipath_stats { + /* number of interrupts taken */ + __u64 sps_ints; + /* number of interrupts for errors */ + __u64 sps_errints; + /* number of errors from chip (not incl. packet errors or CRC) */ + __u64 sps_errs; + /* number of packet errors from chip other than CRC */ + __u64 sps_pkterrs; + /* number of packets with CRC errors (ICRC and VCRC) */ + __u64 sps_crcerrs; + /* number of hardware errors reported (parity, etc.) */ + __u64 sps_hwerrs; + /* number of times IB link changed state unexpectedly */ + __u64 sps_iblink; + /* no longer used; left for compatibility */ + __u64 sps_unused3; + /* number of kernel (port0) packets received */ + __u64 sps_port0pkts; + /* number of "ethernet" packets sent by driver */ + __u64 sps_ether_spkts; + /* number of "ethernet" packets received by driver */ + __u64 sps_ether_rpkts; + /* number of SMA packets sent by driver */ + __u64 sps_sma_spkts; + /* number of SMA packets received by driver */ + __u64 sps_sma_rpkts; + /* number of times all ports rcvhdrq was full and packet dropped */ + __u64 sps_hdrqfull; + /* number of times all ports egrtid was full and packet dropped */ + __u64 sps_etidfull; + /* + * number of times we tried to send from driver, but no pio buffers + * avail + */ + __u64 sps_nopiobufs; + /* number of ports currently open */ + __u64 sps_ports; + /* list of pkeys (other than default) accepted (0 means not set) */ + __u16 sps_pkeys[4]; + /* lids for up to 4 infinipaths, indexed by infinipath # */ + __u16 sps_lid[4]; + /* number of user ports per chip (not IB ports) */ + __u32 sps_nports; + /* not our interrupt, or already handled */ + __u32 sps_nullintr; + /* max number of packets handled per receive call */ + __u32 sps_maxpkts_call; + /* avg number of packets handled per receive call */ + __u32 sps_avgpkts_call; + /* total number of pages locked */ + __u64 sps_pagelocks; + /* total number of pages unlocked */ + __u64 sps_pageunlocks; + /* + * Number of packets dropped in kernel other than errors (ether + * packets if ipath not configured, sma/mad, etc.) + */ + __u64 sps_krdrops; + /* mlids for up to 4 infinipaths, indexed by infinipath # */ + __u16 sps_mlid[4]; + /* pad for future growth */ + __u64 __sps_pad[45]; +}; + +/* + * These are the status bits readable (in ascii form, 64bit value) + * from the "status" sysfs file. + */ +#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */ +#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */ +/* Device has been disabled via admin request */ +#define IPATH_STATUS_ADMIN_DISABLED 0x4 +#define IPATH_STATUS_OIB_SMA 0x8 /* ipath_mad kernel SMA running */ +#define IPATH_STATUS_SMA 0x10 /* user SMA running */ +/* Chip has been found and initted */ +#define IPATH_STATUS_CHIP_PRESENT 0x20 +/* IB link is at ACTIVE, usable for data traffic */ +#define IPATH_STATUS_IB_READY 0x40 +/* link is configured, LID, MTU, etc. have been set */ +#define IPATH_STATUS_IB_CONF 0x80 +/* no link established, probably no cable */ +#define IPATH_STATUS_IB_NOCABLE 0x100 +/* A Fatal hardware error has occurred. */ +#define IPATH_STATUS_HWERROR 0x200 + +/* + * The list of usermode accessible registers. Also see Reg_* later in file. + */ +typedef enum _ipath_ureg { + /* (RO) DMA RcvHdr to be used next. */ + ur_rcvhdrtail = 0, + /* (RW) RcvHdr entry to be processed next by host. */ + ur_rcvhdrhead = 1, + /* (RO) Index of next Eager index to use. */ + ur_rcvegrindextail = 2, + /* (RW) Eager TID to be processed next */ + ur_rcvegrindexhead = 3, + /* For internal use only; max register number. */ + _IPATH_UregMax +} ipath_ureg; + +/* bit values for spi_runtime_flags */ +#define IPATH_RUNTIME_HT 0x1 +#define IPATH_RUNTIME_PCIE 0x2 +#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4 +#define IPATH_RUNTIME_RCVHDR_COPY 0x8 + +/* + * This structure is returned by ipath_userinit() immediately after + * open to get implementation-specific info, and info specific to this + * instance. + * + * This struct must have explict pad fields where type sizes + * may result in different alignments between 32 and 64 bit + * programs, since the 64 bit * bit kernel requires the user code + * to have matching offsets + */ +struct ipath_base_info { + /* version of hardware, for feature checking. */ + __u32 spi_hw_version; + /* version of software, for feature checking. */ + __u32 spi_sw_version; + /* InfiniPath port assigned, goes into sent packets */ + __u32 spi_port; + /* + * IB MTU, packets IB data must be less than this. + * The MTU is in bytes, and will be a multiple of 4 bytes. + */ + __u32 spi_mtu; + /* + * Size of a PIO buffer. Any given packet's total size must be less + * than this (in words). Included is the starting control word, so + * if 513 is returned, then total pkt size is 512 words or less. + */ + __u32 spi_piosize; + /* size of the TID cache in infinipath, in entries */ + __u32 spi_tidcnt; + /* size of the TID Eager list in infinipath, in entries */ + __u32 spi_tidegrcnt; + /* size of a single receive header queue entry. */ + __u32 spi_rcvhdrent_size; + /* + * Count of receive header queue entries allocated. + * This may be less than the spu_rcvhdrcnt passed in!. + */ + __u32 spi_rcvhdr_cnt; + + /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */ + __u32 spi_runtime_flags; + + /* address where receive buffer queue is mapped into */ + __u64 spi_rcvhdr_base; + + /* user program. */ + + /* base address of eager TID receive buffers. */ + __u64 spi_rcv_egrbufs; + + /* Allocated by initialization code, not by protocol. */ + + /* + * Size of each TID buffer in host memory, starting at + * spi_rcv_egrbufs. The buffers are virtually contiguous. + */ + __u32 spi_rcv_egrbufsize; + /* + * The special QP (queue pair) value that identifies an infinipath + * protocol packet from standard IB packets. More, probably much + * more, to be added. + */ + __u32 spi_qpair; + + /* + * User register base for init code, not to be used directly by + * protocol or applications. + */ + __u64 __spi_uregbase; + /* + * Maximum buffer size in bytes that can be used in a single TID + * entry (assuming the buffer is aligned to this boundary). This is + * the minimum of what the hardware and software support Guaranteed + * to be a power of 2. + */ + __u32 spi_tid_maxsize; + /* + * alignment of each pio send buffer (byte count + * to add to spi_piobufbase to get to second buffer) + */ + __u32 spi_pioalign; + /* + * The index of the first pio buffer available to this process; + * needed to do lookup in spi_pioavailaddr; not added to + * spi_piobufbase. + */ + __u32 spi_pioindex; + /* number of buffers mapped for this process */ + __u32 spi_piocnt; + + /* + * Base address of writeonly pio buffers for this process. + * Each buffer has spi_piosize words, and is aligned on spi_pioalign + * boundaries. spi_piocnt buffers are mapped from this address + */ + __u64 spi_piobufbase; + + /* + * Base address of readonly memory copy of the pioavail registers. + * There are 2 bits for each buffer. + */ + __u64 spi_pioavailaddr; + + /* + * Address where driver updates a copy of the interface and driver + * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a + * string indicating hardware error, if there was one. + */ + __u64 spi_status; + + /* number of chip ports available to user processes */ + __u32 spi_nports; + /* unit number of chip we are using */ + __u32 spi_unit; + /* num bufs in each contiguous set */ + __u32 spi_rcv_egrperchunk; + /* size in bytes of each contiguous set */ + __u32 spi_rcv_egrchunksize; + /* total size of mmap to cover full rcvegrbuffers */ + __u32 spi_rcv_egrbuftotlen; +} __attribute__ ((aligned(8))); + + +/* + * This version number is given to the driver by the user code during + * initialization in the spu_userversion field of ipath_user_info, so + * the driver can check for compatibility with user code. + * + * The major version changes when data structures + * change in an incompatible way. The driver must be the same or higher + * for initialization to succeed. In some cases, a higher version + * driver will not interoperate with older software, and initialization + * will return an error. + */ +#define IPATH_USER_SWMAJOR 1 + +/* + * Minor version differences are always compatible + * a within a major version, however if if user software is larger + * than driver software, some new features and/or structure fields + * may not be implemented; the user code must deal with this if it + * cares, or it must abort after initialization reports the difference + */ +#define IPATH_USER_SWMINOR 2 + +#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR) + +#define IPATH_KERN_TYPE 0 + +/* + * Similarly, this is the kernel version going back to the user. It's + * slightly different, in that we want to tell if the driver was built as + * part of a PathScale release, or from the driver from OpenIB, kernel.org, + * or a standard distribution, for support reasons. The high bit is 0 for + * non-PathScale, and 1 for PathScale-built/supplied. + * + * It's returned by the driver to the user code during initialization in the + * spi_sw_version field of ipath_base_info, so the user code can in turn + * check for compatibility with the kernel. +*/ +#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION) + +/* + * This structure is passed to ipath_userinit() to tell the driver where + * user code buffers are, sizes, etc. The offsets and sizes of the + * fields must remain unchanged, for binary compatibility. It can + * be extended, if userversion is changed so user code can tell, if needed + */ +struct ipath_user_info { + /* + * version of user software, to detect compatibility issues. + * Should be set to IPATH_USER_SWVERSION. + */ + __u32 spu_userversion; + + /* desired number of receive header queue entries */ + __u32 spu_rcvhdrcnt; + + /* size of struct base_info to write to */ + __u32 spu_base_info_size; + + /* + * number of words in KD protocol header + * This tells InfiniPath how many words to copy to rcvhdrq. If 0, + * kernel uses a default. Once set, attempts to set any other value + * are an error (EAGAIN) until driver is reloaded. + */ + __u32 spu_rcvhdrsize; + + /* + * cache line aligned (64 byte) user address to + * which the rcvhdrtail register will be written by infinipath + * whenever it changes, so that no chip registers are read in + * the performance path. + */ + __u64 spu_rcvhdraddr; + + /* + * address of struct base_info to write to + */ + __u64 spu_base_info; + +} __attribute__ ((aligned(8))); + +/* User commands. */ + +#define IPATH_CMD_MIN 16 + +#define IPATH_CMD_USER_INIT 16 /* set up userspace */ +#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */ +#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */ +#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */ +#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */ +#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */ + +#define IPATH_CMD_MAX 21 + +struct ipath_port_info { + __u32 num_active; /* number of active units */ + __u32 unit; /* unit (chip) assigned to caller */ + __u32 port; /* port on unit assigned to caller */ +}; + +struct ipath_tid_info { + __u32 tidcnt; + /* make structure same size in 32 and 64 bit */ + __u32 tid__unused; + /* virtual address of first page in transfer */ + __u64 tidvaddr; + /* pointer (same size 32/64 bit) to __u16 tid array */ + __u64 tidlist; + + /* + * pointer (same size 32/64 bit) to bitmap of TIDs used + * for this call; checked for being large enough at open + */ + __u64 tidmap; +}; + +struct ipath_cmd { + __u32 type; /* command type */ + union { + struct ipath_tid_info tid_info; + struct ipath_user_info user_info; + /* address in userspace of struct ipath_port_info to + write result to */ + __u64 port_info; + /* enable/disable receipt of packets */ + __u32 recv_ctrl; + /* partition key to set */ + __u16 part_key; + } cmd; +}; + +struct ipath_iovec { + /* Pointer to data, but same size 32 and 64 bit */ + __u64 iov_base; + + /* + * Length of data; don't need 64 bits, but want + * ipath_sendpkt to remain same size as before 32 bit changes, so... + */ + __u64 iov_len; +}; + +/* + * Describes a single packet for send. Each packet can have one or more + * buffers, but the total length (exclusive of IB headers) must be less + * than the MTU, and if using the PIO method, entire packet length, + * including IB headers, must be less than the ipath_piosize value (words). + * Use of this necessitates including sys/uio.h + */ +struct __ipath_sendpkt { + __u32 sps_flags; /* flags for packet (TBD) */ + __u32 sps_cnt; /* number of entries to use in sps_iov */ + /* array of iov's describing packet. TEMPORARY */ + struct ipath_iovec sps_iov[4]; +}; + +/* Passed into SMA special file's ->read and ->write methods. */ +struct ipath_sma_pkt +{ + __u32 unit; /* unit on which to send packet */ + __u64 data; /* address of payload in userspace */ + __u32 len; /* length of payload */ +}; + +/* + * Data layout in I2C flash (for GUID, etc.) + * All fields are little-endian binary unless otherwise stated + */ +#define IPATH_FLASH_VERSION 1 +struct ipath_flash { + /* flash layout version (IPATH_FLASH_VERSION) */ + __u8 if_fversion; + /* checksum protecting if_length bytes */ + __u8 if_csum; + /* + * valid length (in use, protected by if_csum), including + * if_fversion and if_sum themselves) + */ + __u8 if_length; + /* the GUID, in network order */ + __u8 if_guid[8]; + /* number of GUIDs to use, starting from if_guid */ + __u8 if_numguid; + /* the board serial number, in ASCII */ + char if_serial[12]; + /* board mfg date (YYYYMMDD ASCII) */ + char if_mfgdate[8]; + /* last board rework/test date (YYYYMMDD ASCII) */ + char if_testdate[8]; + /* logging of error counts, TBD */ + __u8 if_errcntp[4]; + /* powered on hours, updated at driver unload */ + __u8 if_powerhour[2]; + /* ASCII free-form comment field */ + char if_comment[32]; + /* 78 bytes used, min flash size is 128 bytes */ + __u8 if_future[50]; +}; + +/* + * These are the counters implemented in the chip, and are listed in order. + * The InterCaps naming is taken straight from the chip spec. + */ +struct infinipath_counters { + __u64 LBIntCnt; + __u64 LBFlowStallCnt; + __u64 Reserved1; + __u64 TxUnsupVLErrCnt; + __u64 TxDataPktCnt; + __u64 TxFlowPktCnt; + __u64 TxDwordCnt; + __u64 TxLenErrCnt; + __u64 TxMaxMinLenErrCnt; + __u64 TxUnderrunCnt; + __u64 TxFlowStallCnt; + __u64 TxDroppedPktCnt; + __u64 RxDroppedPktCnt; + __u64 RxDataPktCnt; + __u64 RxFlowPktCnt; + __u64 RxDwordCnt; + __u64 RxLenErrCnt; + __u64 RxMaxMinLenErrCnt; + __u64 RxICRCErrCnt; + __u64 RxVCRCErrCnt; + __u64 RxFlowCtrlErrCnt; + __u64 RxBadFormatCnt; + __u64 RxLinkProblemCnt; + __u64 RxEBPCnt; + __u64 RxLPCRCErrCnt; + __u64 RxBufOvflCnt; + __u64 RxTIDFullErrCnt; + __u64 RxTIDValidErrCnt; + __u64 RxPKeyMismatchCnt; + __u64 RxP0HdrEgrOvflCnt; + __u64 RxP1HdrEgrOvflCnt; + __u64 RxP2HdrEgrOvflCnt; + __u64 RxP3HdrEgrOvflCnt; + __u64 RxP4HdrEgrOvflCnt; + __u64 RxP5HdrEgrOvflCnt; + __u64 RxP6HdrEgrOvflCnt; + __u64 RxP7HdrEgrOvflCnt; + __u64 RxP8HdrEgrOvflCnt; + __u64 Reserved6; + __u64 Reserved7; + __u64 IBStatusChangeCnt; + __u64 IBLinkErrRecoveryCnt; + __u64 IBLinkDownedCnt; + __u64 IBSymbolErrCnt; +}; + +/* + * The next set of defines are for packet headers, and chip register + * and memory bits that are visible to and/or used by user-mode software + * The other bits that are used only by the driver or diags are in + * ipath_registers.h + */ + +/* RcvHdrFlags bits */ +#define INFINIPATH_RHF_LENGTH_MASK 0x7FF +#define INFINIPATH_RHF_LENGTH_SHIFT 0 +#define INFINIPATH_RHF_RCVTYPE_MASK 0x7 +#define INFINIPATH_RHF_RCVTYPE_SHIFT 11 +#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF +#define INFINIPATH_RHF_EGRINDEX_SHIFT 16 +#define INFINIPATH_RHF_H_ICRCERR 0x80000000 +#define INFINIPATH_RHF_H_VCRCERR 0x40000000 +#define INFINIPATH_RHF_H_PARITYERR 0x20000000 +#define INFINIPATH_RHF_H_LENERR 0x10000000 +#define INFINIPATH_RHF_H_MTUERR 0x08000000 +#define INFINIPATH_RHF_H_IHDRERR 0x04000000 +#define INFINIPATH_RHF_H_TIDERR 0x02000000 +#define INFINIPATH_RHF_H_MKERR 0x01000000 +#define INFINIPATH_RHF_H_IBERR 0x00800000 +#define INFINIPATH_RHF_L_SWA 0x00008000 +#define INFINIPATH_RHF_L_SWB 0x00004000 + +/* infinipath header fields */ +#define INFINIPATH_I_VERS_MASK 0xF +#define INFINIPATH_I_VERS_SHIFT 28 +#define INFINIPATH_I_PORT_MASK 0xF +#define INFINIPATH_I_PORT_SHIFT 24 +#define INFINIPATH_I_TID_MASK 0x7FF +#define INFINIPATH_I_TID_SHIFT 13 +#define INFINIPATH_I_OFFSET_MASK 0x1FFF +#define INFINIPATH_I_OFFSET_SHIFT 0 + +/* K_PktFlags bits */ +#define INFINIPATH_KPF_INTR 0x1 + +/* SendPIO per-buffer control */ +#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF +#define INFINIPATH_SP_LENGTHP1_SHIFT 0 +#define INFINIPATH_SP_INTR 0x80000000 +#define INFINIPATH_SP_TEST 0x40000000 +#define INFINIPATH_SP_TESTEBP 0x20000000 + +/* SendPIOAvail bits */ +#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1 +#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0 + +#endif /* _IPATH_COMMON_H */ diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h new file mode 100644 index 00000000000..593e28969c6 --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_debug.h @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _IPATH_DEBUG_H +#define _IPATH_DEBUG_H + +#ifndef _IPATH_DEBUGGING /* debugging enabled or not */ +#define _IPATH_DEBUGGING 1 +#endif + +#if _IPATH_DEBUGGING + +/* + * Mask values for debugging. The scheme allows us to compile out any + * of the debug tracing stuff, and if compiled in, to enable or disable + * dynamically. This can be set at modprobe time also: + * modprobe infinipath.ko infinipath_debug=7 + */ + +#define __IPATH_INFO 0x1 /* generic low verbosity stuff */ +#define __IPATH_DBG 0x2 /* generic debug */ +#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */ +/* leave some low verbosity spots open */ +#define __IPATH_VERBDBG 0x40 /* very verbose debug */ +#define __IPATH_PKTDBG 0x80 /* print packet data */ +/* print process startup (init)/exit messages */ +#define __IPATH_PROCDBG 0x100 +/* print mmap/nopage stuff, not using VDBG any more */ +#define __IPATH_MMDBG 0x200 +#define __IPATH_USER_SEND 0x1000 /* use user mode send */ +#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */ +#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */ +#define __IPATH_SMADBG 0x8000 /* sma packet debug */ +#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) general debug on */ +#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings on */ +#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors on */ +#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump on */ +#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump on */ + +#else /* _IPATH_DEBUGGING */ + +/* + * define all of these even with debugging off, for the few places that do + * if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the + * compiler eliminate the code + */ + +#define __IPATH_INFO 0x0 /* generic low verbosity stuff */ +#define __IPATH_DBG 0x0 /* generic debug */ +#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */ +#define __IPATH_VERBDBG 0x0 /* very verbose debug */ +#define __IPATH_PKTDBG 0x0 /* print packet data */ +#define __IPATH_PROCDBG 0x0 /* print process startup (init)/exit messages */ +/* print mmap/nopage stuff, not using VDBG any more */ +#define __IPATH_MMDBG 0x0 +#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */ +#define __IPATH_SMADBG 0x0 /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */ +#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */ +#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */ +#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */ +#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */ + +#endif /* _IPATH_DEBUGGING */ + +#define __IPATH_VERBOSEDBG __IPATH_VERBDBG + +#endif /* _IPATH_DEBUG_H */ diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h new file mode 100644 index 00000000000..159d0aed31a --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -0,0 +1,884 @@ +#ifndef _IPATH_KERNEL_H +#define _IPATH_KERNEL_H +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * This header file is the base header file for infinipath kernel code + * ipath_user.h serves a similar purpose for user code. + */ + +#include <linux/interrupt.h> +#include <asm/io.h> + +#include "ipath_common.h" +#include "ipath_debug.h" +#include "ipath_registers.h" + +/* only s/w major version of InfiniPath we can handle */ +#define IPATH_CHIP_VERS_MAJ 2U + +/* don't care about this except printing */ +#define IPATH_CHIP_VERS_MIN 0U + +/* temporary, maybe always */ +extern struct infinipath_stats ipath_stats; + +#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ + +struct ipath_portdata { + void **port_rcvegrbuf; + dma_addr_t *port_rcvegrbuf_phys; + /* rcvhdrq base, needs mmap before useful */ + void *port_rcvhdrq; + /* kernel virtual address where hdrqtail is updated */ + u64 *port_rcvhdrtail_kvaddr; + /* page * used for uaddr */ + struct page *port_rcvhdrtail_pagep; + /* + * temp buffer for expected send setup, allocated at open, instead + * of each setup call + */ + void *port_tid_pg_list; + /* when waiting for rcv or pioavail */ + wait_queue_head_t port_wait; + /* + * rcvegr bufs base, physical, must fit + * in 44 bits so 32 bit programs mmap64 44 bit works) + */ + dma_addr_t port_rcvegr_phys; + /* mmap of hdrq, must fit in 44 bits */ + dma_addr_t port_rcvhdrq_phys; + /* + * the actual user address that we ipath_mlock'ed, so we can + * ipath_munlock it at close + */ + unsigned long port_rcvhdrtail_uaddr; + /* + * number of opens on this instance (0 or 1; ignoring forks, dup, + * etc. for now) + */ + int port_cnt; + /* + * how much space to leave at start of eager TID entries for + * protocol use, on each TID + */ + /* instead of calculating it */ + unsigned port_port; + /* chip offset of PIO buffers for this port */ + u32 port_piobufs; + /* how many alloc_pages() chunks in port_rcvegrbuf_pages */ + u32 port_rcvegrbuf_chunks; + /* how many egrbufs per chunk */ + u32 port_rcvegrbufs_perchunk; + /* order for port_rcvegrbuf_pages */ + size_t port_rcvegrbuf_size; + /* rcvhdrq size (for freeing) */ + size_t port_rcvhdrq_size; + /* next expected TID to check when looking for free */ + u32 port_tidcursor; + /* next expected TID to check */ + unsigned long port_flag; + /* WAIT_RCV that timed out, no interrupt */ + u32 port_rcvwait_to; + /* WAIT_PIO that timed out, no interrupt */ + u32 port_piowait_to; + /* WAIT_RCV already happened, no wait */ + u32 port_rcvnowait; + /* WAIT_PIO already happened, no wait */ + u32 port_pionowait; + /* total number of rcvhdrqfull errors */ + u32 port_hdrqfull; + /* pid of process using this port */ + pid_t port_pid; + /* same size as task_struct .comm[] */ + char port_comm[16]; + /* pkeys set by this use of this port */ + u16 port_pkeys[4]; + /* so file ops can get at unit */ + struct ipath_devdata *port_dd; +}; + +struct sk_buff; + +/* + * control information for layered drivers + */ +struct _ipath_layer { + void *l_arg; +}; + +/* Verbs layer interface */ +struct _verbs_layer { + void *l_arg; + struct timer_list l_timer; +}; + +struct ipath_devdata { + struct list_head ipath_list; + + struct ipath_kregs const *ipath_kregs; + struct ipath_cregs const *ipath_cregs; + + /* mem-mapped pointer to base of chip regs */ + u64 __iomem *ipath_kregbase; + /* end of mem-mapped chip space; range checking */ + u64 __iomem *ipath_kregend; + /* physical address of chip for io_remap, etc. */ + unsigned long ipath_physaddr; + /* base of memory alloced for ipath_kregbase, for free */ + u64 *ipath_kregalloc; + /* + * version of kregbase that doesn't have high bits set (for 32 bit + * programs, so mmap64 44 bit works) + */ + u64 __iomem *ipath_kregvirt; + /* + * virtual address where port0 rcvhdrqtail updated for this unit. + * only written to by the chip, not the driver. + */ + volatile __le64 *ipath_hdrqtailptr; + dma_addr_t ipath_dma_addr; + /* ipath_cfgports pointers */ + struct ipath_portdata **ipath_pd; + /* sk_buffs used by port 0 eager receive queue */ + struct sk_buff **ipath_port0_skbs; + /* kvirt address of 1st 2k pio buffer */ + void __iomem *ipath_pio2kbase; + /* kvirt address of 1st 4k pio buffer */ + void __iomem *ipath_pio4kbase; + /* + * points to area where PIOavail registers will be DMA'ed. + * Has to be on a page of it's own, because the page will be + * mapped into user program space. This copy is *ONLY* ever + * written by DMA, not by the driver! Need a copy per device + * when we get to multiple devices + */ + volatile __le64 *ipath_pioavailregs_dma; + /* physical address where updates occur */ + dma_addr_t ipath_pioavailregs_phys; + struct _ipath_layer ipath_layer; + /* setup intr */ + int (*ipath_f_intrsetup)(struct ipath_devdata *); + /* setup on-chip bus config */ + int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *); + /* hard reset chip */ + int (*ipath_f_reset)(struct ipath_devdata *); + int (*ipath_f_get_boardname)(struct ipath_devdata *, char *, + size_t); + void (*ipath_f_init_hwerrors)(struct ipath_devdata *); + void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *, + size_t); + void (*ipath_f_quiet_serdes)(struct ipath_devdata *); + int (*ipath_f_bringup_serdes)(struct ipath_devdata *); + int (*ipath_f_early_init)(struct ipath_devdata *); + void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned); + void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*, + u32, unsigned long); + void (*ipath_f_tidtemplate)(struct ipath_devdata *); + void (*ipath_f_cleanup)(struct ipath_devdata *); + void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64); + /* fill out chip-specific fields */ + int (*ipath_f_get_base_info)(struct ipath_portdata *, void *); + struct _verbs_layer verbs_layer; + /* total dwords sent (summed from counter) */ + u64 ipath_sword; + /* total dwords rcvd (summed from counter) */ + u64 ipath_rword; + /* total packets sent (summed from counter) */ + u64 ipath_spkts; + /* total packets rcvd (summed from counter) */ + u64 ipath_rpkts; + /* ipath_statusp initially points to this. */ + u64 _ipath_status; + /* GUID for this interface, in network order */ + __be64 ipath_guid; + /* + * aggregrate of error bits reported since last cleared, for + * limiting of error reporting + */ + ipath_err_t ipath_lasterror; + /* + * aggregrate of error bits reported since last cleared, for + * limiting of hwerror reporting + */ + ipath_err_t ipath_lasthwerror; + /* + * errors masked because they occur too fast, also includes errors + * that are always ignored (ipath_ignorederrs) + */ + ipath_err_t ipath_maskederrs; + /* time in jiffies at which to re-enable maskederrs */ + unsigned long ipath_unmasktime; + /* + * errors always ignored (masked), at least for a given + * chip/device, because they are wrong or not useful + */ + ipath_err_t ipath_ignorederrs; + /* count of egrfull errors, combined for all ports */ + u64 ipath_last_tidfull; + /* for ipath_qcheck() */ + u64 ipath_lastport0rcv_cnt; + /* template for writing TIDs */ + u64 ipath_tidtemplate; + /* value to write to free TIDs */ + u64 ipath_tidinvalid; + /* PE-800 rcv interrupt setup */ + u64 ipath_rhdrhead_intr_off; + + /* size of memory at ipath_kregbase */ + u32 ipath_kregsize; + /* number of registers used for pioavail */ + u32 ipath_pioavregs; + /* IPATH_POLL, etc. */ + u32 ipath_flags; + /* ipath_flags sma is waiting for */ + u32 ipath_sma_state_wanted; + /* last buffer for user use, first buf for kernel use is this + * index. */ + u32 ipath_lastport_piobuf; + /* is a stats timer active */ + u32 ipath_stats_timer_active; + /* dwords sent read from counter */ + u32 ipath_lastsword; + /* dwords received read from counter */ + u32 ipath_lastrword; + /* sent packets read from counter */ + u32 ipath_lastspkts; + /* received packets read from counter */ + u32 ipath_lastrpkts; + /* pio bufs allocated per port */ + u32 ipath_pbufsport; + /* + * number of ports configured as max; zero is set to number chip + * supports, less gives more pio bufs/port, etc. + */ + u32 ipath_cfgports; + /* port0 rcvhdrq head offset */ + u32 ipath_port0head; + /* count of port 0 hdrqfull errors */ + u32 ipath_p0_hdrqfull; + + /* + * (*cfgports) used to suppress multiple instances of same + * port staying stuck at same point + */ + u32 *ipath_lastrcvhdrqtails; + /* + * (*cfgports) used to suppress multiple instances of same + * port staying stuck at same point + */ + u32 *ipath_lastegrheads; + /* + * index of last piobuffer we used. Speeds up searching, by + * starting at this point. Doesn't matter if multiple cpu's use and + * update, last updater is only write that matters. Whenever it + * wraps, we update shadow copies. Need a copy per device when we + * get to multiple devices + */ + u32 ipath_lastpioindex; + /* max length of freezemsg */ + u32 ipath_freezelen; + /* + * consecutive times we wanted a PIO buffer but were unable to + * get one + */ + u32 ipath_consec_nopiobuf; + /* + * hint that we should update ipath_pioavailshadow before + * looking for a PIO buffer + */ + u32 ipath_upd_pio_shadow; + /* so we can rewrite it after a chip reset */ + u32 ipath_pcibar0; + /* so we can rewrite it after a chip reset */ + u32 ipath_pcibar1; + /* sequential tries for SMA send and no bufs */ + u32 ipath_nosma_bufs; + /* duration (seconds) ipath_nosma_bufs set */ + u32 ipath_nosma_secs; + + /* HT/PCI Vendor ID (here for NodeInfo) */ + u16 ipath_vendorid; + /* HT/PCI Device ID (here for NodeInfo) */ + u16 ipath_deviceid; + /* offset in HT config space of slave/primary interface block */ + u8 ipath_ht_slave_off; + /* for write combining settings */ + unsigned long ipath_wc_cookie; + /* ref count for each pkey */ + atomic_t ipath_pkeyrefs[4]; + /* shadow copy of all exptids physaddr; used only by funcsim */ + u64 *ipath_tidsimshadow; + /* shadow copy of struct page *'s for exp tid pages */ + struct page **ipath_pageshadow; + /* lock to workaround chip bug 9437 */ + spinlock_t ipath_tid_lock; + + /* + * IPATH_STATUS_*, + * this address is mapped readonly into user processes so they can + * get status cheaply, whenever they want. + */ + u64 *ipath_statusp; + /* freeze msg if hw error put chip in freeze */ + char *ipath_freezemsg; + /* pci access data structure */ + struct pci_dev *pcidev; + struct cdev *cdev; + struct class_device *class_dev; + /* timer used to prevent stats overflow, error throttling, etc. */ + struct timer_list ipath_stats_timer; + /* check for stale messages in rcv queue */ + /* only allow one intr at a time. */ + unsigned long ipath_rcv_pending; + + /* + * Shadow copies of registers; size indicates read access size. + * Most of them are readonly, but some are write-only register, + * where we manipulate the bits in the shadow copy, and then write + * the shadow copy to infinipath. + * + * We deliberately make most of these 32 bits, since they have + * restricted range. For any that we read, we won't to generate 32 + * bit accesses, since Opteron will generate 2 separate 32 bit HT + * transactions for a 64 bit read, and we want to avoid unnecessary + * HT transactions. + */ + + /* This is the 64 bit group */ + + /* + * shadow of pioavail, check to be sure it's large enough at + * init time. + */ + unsigned long ipath_pioavailshadow[8]; + /* shadow of kr_gpio_out, for rmw ops */ + u64 ipath_gpio_out; + /* kr_revision shadow */ + u64 ipath_revision; + /* + * shadow of ibcctrl, for interrupt handling of link changes, + * etc. + */ + u64 ipath_ibcctrl; + /* + * last ibcstatus, to suppress "duplicate" status change messages, + * mostly from 2 to 3 + */ + u64 ipath_lastibcstat; + /* hwerrmask shadow */ + ipath_err_t ipath_hwerrmask; + /* interrupt config reg shadow */ + u64 ipath_intconfig; + /* kr_sendpiobufbase value */ + u64 ipath_piobufbase; + + /* these are the "32 bit" regs */ + + /* + * number of GUIDs in the flash for this interface; may need some + * rethinking for setting on other ifaces + */ + u32 ipath_nguid; + /* + * the following two are 32-bit bitmasks, but {test,clear,set}_bit + * all expect bit fields to be "unsigned long" + */ + /* shadow kr_rcvctrl */ + unsigned long ipath_rcvctrl; + /* shadow kr_sendctrl */ + unsigned long ipath_sendctrl; + + /* value we put in kr_rcvhdrcnt */ + u32 ipath_rcvhdrcnt; + /* value we put in kr_rcvhdrsize */ + u32 ipath_rcvhdrsize; + /* value we put in kr_rcvhdrentsize */ + u32 ipath_rcvhdrentsize; + /* offset of last entry in rcvhdrq */ + u32 ipath_hdrqlast; + /* kr_portcnt value */ + u32 ipath_portcnt; + /* kr_pagealign value */ + u32 ipath_palign; + /* number of "2KB" PIO buffers */ + u32 ipath_piobcnt2k; + /* size in bytes of "2KB" PIO buffers */ + u32 ipath_piosize2k; + /* number of "4KB" PIO buffers */ + u32 ipath_piobcnt4k; + /* size in bytes of "4KB" PIO buffers */ + u32 ipath_piosize4k; + /* kr_rcvegrbase value */ + u32 ipath_rcvegrbase; + /* kr_rcvegrcnt value */ + u32 ipath_rcvegrcnt; + /* kr_rcvtidbase value */ + u32 ipath_rcvtidbase; + /* kr_rcvtidcnt value */ + u32 ipath_rcvtidcnt; + /* kr_sendregbase */ + u32 ipath_sregbase; + /* kr_userregbase */ + u32 ipath_uregbase; + /* kr_counterregbase */ + u32 ipath_cregbase; + /* shadow the control register contents */ + u32 ipath_control; + /* shadow the gpio output contents */ + u32 ipath_extctrl; + /* PCI revision register (HTC rev on FPGA) */ + u32 ipath_pcirev; + + /* chip address space used by 4k pio buffers */ + u32 ipath_4kalign; + /* The MTU programmed for this unit */ + u32 ipath_ibmtu; + /* + * The max size IB packet, included IB headers that we can send. + * Starts same as ipath_piosize, but is affected when ibmtu is + * changed, or by size of eager buffers + */ + u32 ipath_ibmaxlen; + /* + * ibmaxlen at init time, limited by chip and by receive buffer + * size. Not changed after init. + */ + u32 ipath_init_ibmaxlen; + /* size of each rcvegrbuffer */ + u32 ipath_rcvegrbufsize; + /* width (2,4,8,16,32) from HT config reg */ + u32 ipath_htwidth; + /* HT speed (200,400,800,1000) from HT config */ + u32 ipath_htspeed; + /* ports waiting for PIOavail intr */ + unsigned long ipath_portpiowait; + /* + * number of sequential ibcstatus change for polling active/quiet + * (i.e., link not coming up). + */ + u32 ipath_ibpollcnt; + /* low and high portions of MSI capability/vector */ + u32 ipath_msi_lo; + /* saved after PCIe init for restore after reset */ + u32 ipath_msi_hi; + /* MSI data (vector) saved for restore */ + u16 ipath_msi_data; + /* MLID programmed for this instance */ + u16 ipath_mlid; + /* LID programmed for this instance */ + u16 ipath_lid; + /* list of pkeys programmed; 0 if not set */ + u16 ipath_pkeys[4]; + /* ASCII serial number, from flash */ + u8 ipath_serial[12]; + /* human readable board version */ + u8 ipath_boardversion[80]; + /* chip major rev, from ipath_revision */ + u8 ipath_majrev; + /* chip minor rev, from ipath_revision */ + u8 ipath_minrev; + /* board rev, from ipath_revision */ + u8 ipath_boardrev; + /* unit # of this chip, if present */ + int ipath_unit; + /* saved for restore after reset */ + u8 ipath_pci_cacheline; + /* LID mask control */ + u8 ipath_lmc; +}; + +extern volatile __le64 *ipath_port0_rcvhdrtail; +extern dma_addr_t ipath_port0_rcvhdrtail_dma; + +#define IPATH_PORT0_RCVHDRTAIL_SIZE PAGE_SIZE + +extern struct list_head ipath_dev_list; +extern spinlock_t ipath_devs_lock; +extern struct ipath_devdata *ipath_lookup(int unit); + +extern u16 ipath_layer_rcv_opcode; +extern int ipath_verbs_registered; +extern int __ipath_layer_intr(struct ipath_devdata *, u32); +extern int ipath_layer_intr(struct ipath_devdata *, u32); +extern int __ipath_layer_rcv(struct ipath_devdata *, void *, + struct sk_buff *); +extern int __ipath_layer_rcv_lid(struct ipath_devdata *, void *); +extern int __ipath_verbs_piobufavail(struct ipath_devdata *); +extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32); + +void ipath_layer_add(struct ipath_devdata *); +void ipath_layer_del(struct ipath_devdata *); + +int ipath_init_chip(struct ipath_devdata *, int); +int ipath_enable_wc(struct ipath_devdata *dd); +void ipath_disable_wc(struct ipath_devdata *dd); +int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp); +void ipath_shutdown_device(struct ipath_devdata *); + +struct file_operations; +int ipath_cdev_init(int minor, char *name, struct file_operations *fops, + struct cdev **cdevp, struct class_device **class_devp); +void ipath_cdev_cleanup(struct cdev **cdevp, + struct class_device **class_devp); + +int ipath_diag_init(void); +void ipath_diag_cleanup(void); +void ipath_diag_bringup_link(struct ipath_devdata *); + +extern wait_queue_head_t ipath_sma_state_wait; + +int ipath_user_add(struct ipath_devdata *dd); +void ipath_user_del(struct ipath_devdata *dd); + +struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t); + +extern int ipath_diag_inuse; + +irqreturn_t ipath_intr(int irq, void *devid, struct pt_regs *regs); +void ipath_decode_err(char *buf, size_t blen, ipath_err_t err); +#if __IPATH_INFO || __IPATH_DBG +extern const char *ipath_ibcstatus_str[]; +#endif + +/* clean up any per-chip chip-specific stuff */ +void ipath_chip_cleanup(struct ipath_devdata *); +/* clean up any chip type-specific stuff */ +void ipath_chip_done(void); + +/* check to see if we have to force ordering for write combining */ +int ipath_unordered_wc(void); + +void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first, + unsigned cnt); + +int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *); +void ipath_free_pddata(struct ipath_devdata *, u32, int); + +int ipath_parse_ushort(const char *str, unsigned short *valp); + +int ipath_wait_linkstate(struct ipath_devdata *, u32, int); +void ipath_set_ib_lstate(struct ipath_devdata *, int); +void ipath_kreceive(struct ipath_devdata *); +int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned); +int ipath_reset_device(int); +void ipath_get_faststats(unsigned long); + +/* for use in system calls, where we want to know device type, etc. */ +#define port_fp(fp) ((struct ipath_portdata *) (fp)->private_data) + +/* + * values for ipath_flags + */ +/* The chip is up and initted */ +#define IPATH_INITTED 0x2 + /* set if any user code has set kr_rcvhdrsize */ +#define IPATH_RCVHDRSZ_SET 0x4 + /* The chip is present and valid for accesses */ +#define IPATH_PRESENT 0x8 + /* HT link0 is only 8 bits wide, ignore upper byte crc + * errors, etc. */ +#define IPATH_8BIT_IN_HT0 0x10 + /* HT link1 is only 8 bits wide, ignore upper byte crc + * errors, etc. */ +#define IPATH_8BIT_IN_HT1 0x20 + /* The link is down */ +#define IPATH_LINKDOWN 0x40 + /* The link level is up (0x11) */ +#define IPATH_LINKINIT 0x80 + /* The link is in the armed (0x21) state */ +#define IPATH_LINKARMED 0x100 + /* The link is in the active (0x31) state */ +#define IPATH_LINKACTIVE 0x200 + /* link current state is unknown */ +#define IPATH_LINKUNK 0x400 + /* no IB cable, or no device on IB cable */ +#define IPATH_NOCABLE 0x4000 + /* Supports port zero per packet receive interrupts via + * GPIO */ +#define IPATH_GPIO_INTR 0x8000 + /* uses the coded 4byte TID, not 8 byte */ +#define IPATH_4BYTE_TID 0x10000 + /* packet/word counters are 32 bit, else those 4 counters + * are 64bit */ +#define IPATH_32BITCOUNTERS 0x20000 + /* can miss port0 rx interrupts */ +#define IPATH_POLL_RX_INTR 0x40000 +#define IPATH_DISABLED 0x80000 /* administratively disabled */ + +/* portdata flag bit offsets */ + /* waiting for a packet to arrive */ +#define IPATH_PORT_WAITING_RCV 2 + /* waiting for a PIO buffer to be available */ +#define IPATH_PORT_WAITING_PIO 3 + +/* free up any allocated data at closes */ +void ipath_free_data(struct ipath_portdata *dd); +int ipath_waitfor_mdio_cmdready(struct ipath_devdata *); +int ipath_waitfor_complete(struct ipath_devdata *, ipath_kreg, u64, u64 *); +u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *); +/* init PE-800-specific func */ +void ipath_init_pe800_funcs(struct ipath_devdata *); +/* init HT-400-specific func */ +void ipath_init_ht400_funcs(struct ipath_devdata *); +void ipath_get_guid(struct ipath_devdata *); +u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg); + +/* + * number of words used for protocol header if not set by ipath_userinit(); + */ +#define IPATH_DFLT_RCVHDRSIZE 9 + +#define IPATH_MDIO_CMD_WRITE 1 +#define IPATH_MDIO_CMD_READ 2 +#define IPATH_MDIO_CLD_DIV 25 /* to get 2.5 Mhz mdio clock */ +#define IPATH_MDIO_CMDVALID 0x40000000 /* bit 30 */ +#define IPATH_MDIO_DATAVALID 0x80000000 /* bit 31 */ +#define IPATH_MDIO_CTRL_STD 0x0 + +static inline u64 ipath_mdio_req(int cmd, int dev, int reg, int data) +{ + return (((u64) IPATH_MDIO_CLD_DIV) << 32) | + (cmd << 26) | + (dev << 21) | + (reg << 16) | + (data & 0xFFFF); +} + + /* signal and fifo status, in bank 31 */ +#define IPATH_MDIO_CTRL_XGXS_REG_8 0x8 + /* controls loopback, redundancy */ +#define IPATH_MDIO_CTRL_8355_REG_1 0x10 + /* premph, encdec, etc. */ +#define IPATH_MDIO_CTRL_8355_REG_2 0x11 + /* Kchars, etc. */ +#define IPATH_MDIO_CTRL_8355_REG_6 0x15 +#define IPATH_MDIO_CTRL_8355_REG_9 0x18 +#define IPATH_MDIO_CTRL_8355_REG_10 0x1D + +int ipath_get_user_pages(unsigned long, size_t, struct page **); +int ipath_get_user_pages_nocopy(unsigned long, struct page **); +void ipath_release_user_pages(struct page **, size_t); +void ipath_release_user_pages_on_close(struct page **, size_t); +int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int); +int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int); + +/* these are used for the registers that vary with port */ +void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg, + unsigned, u64); +u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg, + unsigned); + +/* + * We could have a single register get/put routine, that takes a group type, + * but this is somewhat clearer and cleaner. It also gives us some error + * checking. 64 bit register reads should always work, but are inefficient + * on opteron (the northbridge always generates 2 separate HT 32 bit reads), + * so we use kreg32 wherever possible. User register and counter register + * reads are always 32 bit reads, so only one form of those routines. + */ + +/* + * At the moment, none of the s-registers are writable, so no + * ipath_write_sreg(), and none of the c-registers are writable, so no + * ipath_write_creg(). + */ + +/** + * ipath_read_ureg32 - read 32-bit virtualized per-port register + * @dd: device + * @regno: register number + * @port: port number + * + * Return the contents of a register that is virtualized to be per port. + * Prints a debug message and returns -1 on errors (not distinguishable from + * valid contents at runtime; we may add a separate error variable at some + * point). + * + * This is normally not used by the kernel, but may be for debugging, and + * has a different implementation than user mode, which is why it's not in + * _common.h. + */ +static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd, + ipath_ureg regno, int port) +{ + if (!dd->ipath_kregbase) + return 0; + + return readl(regno + (u64 __iomem *) + (dd->ipath_uregbase + + (char __iomem *)dd->ipath_kregbase + + dd->ipath_palign * port)); +} + +/** + * ipath_write_ureg - write 32-bit virtualized per-port register + * @dd: device + * @regno: register number + * @value: value + * @port: port + * + * Write the contents of a register that is virtualized to be per port. + */ +static inline void ipath_write_ureg(const struct ipath_devdata *dd, + ipath_ureg regno, u64 value, int port) +{ + u64 __iomem *ubase = (u64 __iomem *) + (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase + + dd->ipath_palign * port); + if (dd->ipath_kregbase) + writeq(value, &ubase[regno]); +} + +static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd, + ipath_kreg regno) +{ + if (!dd->ipath_kregbase) + return -1; + return readl((u32 __iomem *) & dd->ipath_kregbase[regno]); +} + +static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd, + ipath_kreg regno) +{ + if (!dd->ipath_kregbase) + return -1; + + return readq(&dd->ipath_kregbase[regno]); +} + +static inline void ipath_write_kreg(const struct ipath_devdata *dd, + ipath_kreg regno, u64 value) +{ + if (dd->ipath_kregbase) + writeq(value, &dd->ipath_kregbase[regno]); +} + +static inline u64 ipath_read_creg(const struct ipath_devdata *dd, + ipath_sreg regno) +{ + if (!dd->ipath_kregbase) + return 0; + + return readq(regno + (u64 __iomem *) + (dd->ipath_cregbase + + (char __iomem *)dd->ipath_kregbase)); +} + +static inline u32 ipath_read_creg32(const struct ipath_devdata *dd, + ipath_sreg regno) +{ + if (!dd->ipath_kregbase) + return 0; + return readl(regno + (u64 __iomem *) + (dd->ipath_cregbase + + (char __iomem *)dd->ipath_kregbase)); +} + +/* + * sysfs interface. + */ + +struct device_driver; + +extern const char ipath_core_version[]; + +int ipath_driver_create_group(struct device_driver *); +void ipath_driver_remove_group(struct device_driver *); + +int ipath_device_create_group(struct device *, struct ipath_devdata *); +void ipath_device_remove_group(struct device *, struct ipath_devdata *); +int ipath_expose_reset(struct device *); + +int ipath_init_ipathfs(void); +void ipath_exit_ipathfs(void); +int ipathfs_add_device(struct ipath_devdata *); +int ipathfs_remove_device(struct ipath_devdata *); + +/* + * Flush write combining store buffers (if present) and perform a write + * barrier. + */ +#if defined(CONFIG_X86_64) +#define ipath_flush_wc() asm volatile("sfence" ::: "memory") +#else +#define ipath_flush_wc() wmb() +#endif + +extern unsigned ipath_debug; /* debugging bit mask */ + +const char *ipath_get_unit_name(int unit); + +extern struct mutex ipath_mutex; + +#define IPATH_DRV_NAME "ipath_core" +#define IPATH_MAJOR 233 +#define IPATH_SMA_MINOR 128 +#define IPATH_DIAG_MINOR 129 +#define IPATH_NMINORS 130 + +#define ipath_dev_err(dd,fmt,...) \ + do { \ + const struct ipath_devdata *__dd = (dd); \ + if (__dd->pcidev) \ + dev_err(&__dd->pcidev->dev, "%s: " fmt, \ + ipath_get_unit_name(__dd->ipath_unit), \ + ##__VA_ARGS__); \ + else \ + printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \ + ipath_get_unit_name(__dd->ipath_unit), \ + ##__VA_ARGS__); \ + } while (0) + +#if _IPATH_DEBUGGING + +# define __IPATH_DBG_WHICH(which,fmt,...) \ + do { \ + if(unlikely(ipath_debug&(which))) \ + printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \ + __func__,##__VA_ARGS__); \ + } while(0) + +# define ipath_dbg(fmt,...) \ + __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__) +# define ipath_cdbg(which,fmt,...) \ + __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__) + +#else /* ! _IPATH_DEBUGGING */ + +# define ipath_dbg(fmt,...) +# define ipath_cdbg(which,fmt,...) + +#endif /* _IPATH_DEBUGGING */ + +#endif /* _IPATH_KERNEL_H */ diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h new file mode 100644 index 00000000000..1e59750c5f6 --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_registers.h @@ -0,0 +1,446 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _IPATH_REGISTERS_H +#define _IPATH_REGISTERS_H + +/* + * This file should only be included by kernel source, and by the diags. + * It defines the registers, and their contents, for the InfiniPath HT-400 chip + */ + +/* + * These are the InfiniPath register and buffer bit definitions, + * that are visible to software, and needed only by the kernel + * and diag code. A few, that are visible to protocol and user + * code are in ipath_common.h. Some bits are specific + * to a given chip implementation, and have been moved to the + * chip-specific source file + */ + +/* kr_revision bits */ +#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF +#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0 +#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF +#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8 +#define INFINIPATH_R_ARCH_MASK 0xFF +#define INFINIPATH_R_ARCH_SHIFT 16 +#define INFINIPATH_R_SOFTWARE_MASK 0xFF +#define INFINIPATH_R_SOFTWARE_SHIFT 24 +#define INFINIPATH_R_BOARDID_MASK 0xFF +#define INFINIPATH_R_BOARDID_SHIFT 32 + +/* kr_control bits */ +#define INFINIPATH_C_FREEZEMODE 0x00000002 +#define INFINIPATH_C_LINKENABLE 0x00000004 +#define INFINIPATH_C_RESET 0x00000001 + +/* kr_sendctrl bits */ +#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16 + +#define IPATH_S_ABORT 0 +#define IPATH_S_PIOINTBUFAVAIL 1 +#define IPATH_S_PIOBUFAVAILUPD 2 +#define IPATH_S_PIOENABLE 3 +#define IPATH_S_DISARM 31 + +#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT) +#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL) +#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD) +#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE) +#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM) + +/* kr_rcvctrl bits */ +#define INFINIPATH_R_PORTENABLE_SHIFT 0 +#define INFINIPATH_R_INTRAVAIL_SHIFT 16 +#define INFINIPATH_R_TAILUPD 0x80000000 + +/* kr_intstatus, kr_intclear, kr_intmask bits */ +#define INFINIPATH_I_RCVURG_SHIFT 0 +#define INFINIPATH_I_RCVAVAIL_SHIFT 12 +#define INFINIPATH_I_ERROR 0x80000000 +#define INFINIPATH_I_SPIOSENT 0x40000000 +#define INFINIPATH_I_SPIOBUFAVAIL 0x20000000 +#define INFINIPATH_I_GPIO 0x10000000 + +/* kr_errorstatus, kr_errorclear, kr_errormask bits */ +#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL +#define INFINIPATH_E_RVCRC 0x0000000000000002ULL +#define INFINIPATH_E_RICRC 0x0000000000000004ULL +#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL +#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL +#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL +#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL +#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL +#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL +#define INFINIPATH_E_REBP 0x0000000000000200ULL +#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL +#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL +#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL +#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL +#define INFINIPATH_E_RBADTID 0x0000000000004000ULL +#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL +#define INFINIPATH_E_RHDR 0x0000000000010000ULL +#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL +#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL +#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL +#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL +#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL +#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL +#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL +#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL +#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL +#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL +#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL +#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL +#define INFINIPATH_E_RESET 0x0004000000000000ULL +#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL + +/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ +/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo + * RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: eagerTID, 3: expTID + * bit 4: flag buffer, 5: datainfo, 6: header info */ +#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL +#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40 +#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL +#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44 +#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL +#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL +#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL +#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL + +/* kr_hwdiagctrl bits */ +#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL +#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40 +#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL +#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44 +#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL +#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL +#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL +#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL +#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL + +/* kr_ibcctrl bits */ +#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL +#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0 +#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL +#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8 +#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL +#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1 +#define INFINIPATH_IBCC_LINKINITCMD_POLL 2 /* cycle through TS1/TS2 till OK */ +#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 /* wait for TS1, then go on */ +#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16 +#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL +#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */ +#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ +#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ +#define INFINIPATH_IBCC_LINKCMD_SHIFT 18 +#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL +#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20 +#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL +#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32 +#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL +#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36 +#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL +#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40 +#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL +#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL + +/* kr_ibcstatus bits */ +#define INFINIPATH_IBCS_LINKTRAININGSTATE_MASK 0xF +#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0 +#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7 +#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4 +#define INFINIPATH_IBCS_TXREADY 0x40000000 +#define INFINIPATH_IBCS_TXCREDITOK 0x80000000 +/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */ +#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00 +#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01 +#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02 +#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03 +#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04 +#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05 +#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08 +#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09 +#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a +#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b +#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c +#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e +#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f +/* link state machine states (shift by INFINIPATH_IBCS_LINKSTATE_SHIFT) */ +#define INFINIPATH_IBCS_L_STATE_DOWN 0x0 +#define INFINIPATH_IBCS_L_STATE_INIT 0x1 +#define INFINIPATH_IBCS_L_STATE_ARM 0x2 +#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3 +#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4 + +/* combination link status states that we use with some frequency */ +#define IPATH_IBSTATE_MASK ((INFINIPATH_IBCS_LINKTRAININGSTATE_MASK \ + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \ + (INFINIPATH_IBCS_LINKSTATE_MASK \ + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)) +#define IPATH_IBSTATE_INIT ((INFINIPATH_IBCS_L_STATE_INIT \ + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \ + (INFINIPATH_IBCS_LT_STATE_LINKUP \ + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)) +#define IPATH_IBSTATE_ARM ((INFINIPATH_IBCS_L_STATE_ARM \ + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \ + (INFINIPATH_IBCS_LT_STATE_LINKUP \ + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)) +#define IPATH_IBSTATE_ACTIVE ((INFINIPATH_IBCS_L_STATE_ACTIVE \ + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \ + (INFINIPATH_IBCS_LT_STATE_LINKUP \ + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)) + +/* kr_extstatus bits */ +#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1 +#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL +#define INFINIPATH_EXTS_GPIOIN_SHIFT 48 + +/* kr_extctrl bits */ +#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL +#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32 +#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL +#define INFINIPATH_EXTC_GPIOOE_SHIFT 48 +#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL +#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL +#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL +#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL +#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL +#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL +#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL +#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL +#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL +#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL +#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL +#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL +#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL + +/* kr_mdio bits */ +#define INFINIPATH_MDIO_CLKDIV_MASK 0x7FULL +#define INFINIPATH_MDIO_CLKDIV_SHIFT 32 +#define INFINIPATH_MDIO_COMMAND_MASK 0x7ULL +#define INFINIPATH_MDIO_COMMAND_SHIFT 26 +#define INFINIPATH_MDIO_DEVADDR_MASK 0x1FULL +#define INFINIPATH_MDIO_DEVADDR_SHIFT 21 +#define INFINIPATH_MDIO_REGADDR_MASK 0x1FULL +#define INFINIPATH_MDIO_REGADDR_SHIFT 16 +#define INFINIPATH_MDIO_DATA_MASK 0xFFFFULL +#define INFINIPATH_MDIO_DATA_SHIFT 0 +#define INFINIPATH_MDIO_CMDVALID 0x0000000040000000ULL +#define INFINIPATH_MDIO_RDDATAVALID 0x0000000080000000ULL + +/* kr_partitionkey bits */ +#define INFINIPATH_PKEY_SIZE 16 +#define INFINIPATH_PKEY_MASK 0xFFFF +#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF + +/* kr_serdesconfig0 bits */ +#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */ +#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */ +#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL /* tx idle enables (per lane) */ +#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL /* rx detect enables (per lane) */ +#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL /* L1 Power down; use with RXDETECT, + Otherwise not used on IB side */ + +/* kr_xgxsconfig bits */ +#define INFINIPATH_XGXS_RESET 0x7ULL +#define INFINIPATH_XGXS_MDIOADDR_MASK 0xfULL +#define INFINIPATH_XGXS_MDIOADDR_SHIFT 4 + +#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */ + +/* TID entries (memory), HT400-only */ +#define INFINIPATH_RT_VALID 0x8000000000000000ULL +#define INFINIPATH_RT_ADDR_SHIFT 0 +#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFF +#define INFINIPATH_RT_BUFSIZE_SHIFT 48 + +/* + * IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our + * PIO send buffers. This is well beyond anything currently + * defined in the InfiniBand spec. + */ +#define IPATH_PIO_MAXIBHDR 128 + +typedef u64 ipath_err_t; + +/* mask of defined bits for various registers */ +extern u64 infinipath_i_bitsextant; +extern ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant; + +/* masks that are different in various chips, or only exist in some chips */ +extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask; + +/* + * register bits for selecting i2c direction and values, used for I2C serial + * flash + */ +extern u16 ipath_gpio_sda_num, ipath_gpio_scl_num; +extern u64 ipath_gpio_sda, ipath_gpio_scl; + +/* + * These are the infinipath general register numbers (not offsets). + * The kernel registers are used directly, those beyond the kernel + * registers are calculated from one of the base registers. The use of + * an integer type doesn't allow type-checking as thorough as, say, + * an enum but allows for better hiding of chip differences. + */ +typedef const u16 ipath_kreg, /* infinipath general registers */ + ipath_creg, /* infinipath counter registers */ + ipath_sreg; /* kernel-only, infinipath send registers */ + +/* + * These are the chip registers common to all infinipath chips, and + * used both by the kernel and the diagnostics or other user code. + * They are all implemented such that 64 bit accesses work. + * Some implement no more than 32 bits. Because 64 bit reads + * require 2 HT cmds on opteron, we access those with 32 bit + * reads for efficiency (they are written as 64 bits, since + * the extra 32 bits are nearly free on writes, and it slightly reduces + * complexity). The rest are all accessed as 64 bits. + */ +struct ipath_kregs { + /* These are the 32 bit group */ + ipath_kreg kr_control; + ipath_kreg kr_counterregbase; + ipath_kreg kr_intmask; + ipath_kreg kr_intstatus; + ipath_kreg kr_pagealign; + ipath_kreg kr_portcnt; + ipath_kreg kr_rcvtidbase; + ipath_kreg kr_rcvtidcnt; + ipath_kreg kr_rcvegrbase; + ipath_kreg kr_rcvegrcnt; + ipath_kreg kr_scratch; + ipath_kreg kr_sendctrl; + ipath_kreg kr_sendpiobufbase; + ipath_kreg kr_sendpiobufcnt; + ipath_kreg kr_sendpiosize; + ipath_kreg kr_sendregbase; + ipath_kreg kr_userregbase; + /* These are the 64 bit group */ + ipath_kreg kr_debugport; + ipath_kreg kr_debugportselect; + ipath_kreg kr_errorclear; + ipath_kreg kr_errormask; + ipath_kreg kr_errorstatus; + ipath_kreg kr_extctrl; + ipath_kreg kr_extstatus; + ipath_kreg kr_gpio_clear; + ipath_kreg kr_gpio_mask; + ipath_kreg kr_gpio_out; + ipath_kreg kr_gpio_status; + ipath_kreg kr_hwdiagctrl; + ipath_kreg kr_hwerrclear; + ipath_kreg kr_hwerrmask; + ipath_kreg kr_hwerrstatus; + ipath_kreg kr_ibcctrl; + ipath_kreg kr_ibcstatus; + ipath_kreg kr_intblocked; + ipath_kreg kr_intclear; + ipath_kreg kr_interruptconfig; + ipath_kreg kr_mdio; + ipath_kreg kr_partitionkey; + ipath_kreg kr_rcvbthqp; + ipath_kreg kr_rcvbufbase; + ipath_kreg kr_rcvbufsize; + ipath_kreg kr_rcvctrl; + ipath_kreg kr_rcvhdrcnt; + ipath_kreg kr_rcvhdrentsize; + ipath_kreg kr_rcvhdrsize; + ipath_kreg kr_rcvintmembase; + ipath_kreg kr_rcvintmemsize; + ipath_kreg kr_revision; + ipath_kreg kr_sendbuffererror; + ipath_kreg kr_sendpioavailaddr; + ipath_kreg kr_serdesconfig0; + ipath_kreg kr_serdesconfig1; + ipath_kreg kr_serdesstatus; + ipath_kreg kr_txintmembase; + ipath_kreg kr_txintmemsize; + ipath_kreg kr_xgxsconfig; + ipath_kreg kr_ibpllcfg; + /* use these two (and the following N ports) only with ipath_k*_kreg64_port(); + * not *kreg64() */ + ipath_kreg kr_rcvhdraddr; + ipath_kreg kr_rcvhdrtailaddr; + + /* remaining registers are not present on all types of infinipath chips */ + ipath_kreg kr_rcvpktledcnt; + ipath_kreg kr_pcierbuftestreg0; + ipath_kreg kr_pcierbuftestreg1; + ipath_kreg kr_pcieq0serdesconfig0; + ipath_kreg kr_pcieq0serdesconfig1; + ipath_kreg kr_pcieq0serdesstatus; + ipath_kreg kr_pcieq1serdesconfig0; + ipath_kreg kr_pcieq1serdesconfig1; + ipath_kreg kr_pcieq1serdesstatus; +}; + +struct ipath_cregs { + ipath_creg cr_badformatcnt; + ipath_creg cr_erricrccnt; + ipath_creg cr_errlinkcnt; + ipath_creg cr_errlpcrccnt; + ipath_creg cr_errpkey; + ipath_creg cr_errrcvflowctrlcnt; + ipath_creg cr_err_rlencnt; + ipath_creg cr_errslencnt; + ipath_creg cr_errtidfull; + ipath_creg cr_errtidvalid; + ipath_creg cr_errvcrccnt; + ipath_creg cr_ibstatuschange; + ipath_creg cr_intcnt; + ipath_creg cr_invalidrlencnt; + ipath_creg cr_invalidslencnt; + ipath_creg cr_lbflowstallcnt; + ipath_creg cr_iblinkdowncnt; + ipath_creg cr_iblinkerrrecovcnt; + ipath_creg cr_ibsymbolerrcnt; + ipath_creg cr_pktrcvcnt; + ipath_creg cr_pktrcvflowctrlcnt; + ipath_creg cr_pktsendcnt; + ipath_creg cr_pktsendflowcnt; + ipath_creg cr_portovflcnt; + ipath_creg cr_rcvebpcnt; + ipath_creg cr_rcvovflcnt; + ipath_creg cr_rxdroppktcnt; + ipath_creg cr_senddropped; + ipath_creg cr_sendstallcnt; + ipath_creg cr_sendunderruncnt; + ipath_creg cr_unsupvlcnt; + ipath_creg cr_wordrcvcnt; + ipath_creg cr_wordsendcnt; +}; + +#endif /* _IPATH_REGISTERS_H */ diff --git a/drivers/infiniband/hw/ipath/ips_common.h b/drivers/infiniband/hw/ipath/ips_common.h new file mode 100644 index 00000000000..410a764dfce --- /dev/null +++ b/drivers/infiniband/hw/ipath/ips_common.h @@ -0,0 +1,263 @@ +#ifndef IPS_COMMON_H +#define IPS_COMMON_H +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "ipath_common.h" + +struct ipath_header { + /* + * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset - + * 14 bits before ECO change ~28 Dec 03. After that, Vers 4, + * Port 3, TID 11, offset 14. + */ + __le32 ver_port_tid_offset; + __le16 chksum; + __le16 pkt_flags; +}; + +struct ips_message_header { + __be16 lrh[4]; + __be32 bth[3]; + /* fields below this point are in host byte order */ + struct ipath_header iph; + __u8 sub_opcode; + __u8 flags; + __u16 src_rank; + /* 24 bits. The upper 8 bit is available for other use */ + union { + struct { + unsigned ack_seq_num:24; + unsigned port:4; + unsigned unused:4; + }; + __u32 ack_seq_num_org; + }; + __u8 expected_tid_session_id; + __u8 tinylen; /* to aid MPI */ + union { + __u16 tag; /* to aid MPI */ + __u16 mqhdr; /* for PSM MQ */ + }; + union { + __u32 mpi[4]; /* to aid MPI */ + __u32 data[4]; + __u64 mq[2]; /* for PSM MQ */ + struct { + __u16 mtu; + __u8 major_ver; + __u8 minor_ver; + __u32 not_used; //free + __u32 run_id; + __u32 client_ver; + }; + }; +}; + +struct ether_header { + __be16 lrh[4]; + __be32 bth[3]; + struct ipath_header iph; + __u8 sub_opcode; + __u8 cmd; + __be16 lid; + __u16 mac[3]; + __u8 frag_num; + __u8 seq_num; + __le32 len; + /* MUST be of word size due to PIO write requirements */ + __u32 csum; + __le16 csum_offset; + __le16 flags; + __u16 first_2_bytes; + __u8 unused[2]; /* currently unused */ +}; + +/* + * The PIO buffer used for sending infinipath messages must only be written + * in 32-bit words, all the data must be written, and no writes can occur + * after the last word is written (which transfers "ownership" of the buffer + * to the chip and triggers the message to be sent). + * Since the Linux sk_buff structure can be recursive, non-aligned, and + * any number of bytes in each segment, we use the following structure + * to keep information about the overall state of the copy operation. + * This is used to save the information needed to store the checksum + * in the right place before sending the last word to the hardware and + * to buffer the last 0-3 bytes of non-word sized segments. + */ +struct copy_data_s { + struct ether_header *hdr; + /* addr of PIO buf to write csum to */ + __u32 __iomem *csum_pio; + __u32 __iomem *to; /* addr of PIO buf to write data to */ + __u32 device; /* which device to allocate PIO bufs from */ + __s32 error; /* set if there is an error. */ + __s32 extra; /* amount of data saved in u.buf below */ + __u32 len; /* total length to send in bytes */ + __u32 flen; /* frament length in words */ + __u32 csum; /* partial IP checksum */ + __u32 pos; /* position for partial checksum */ + __u32 offset; /* offset to where data currently starts */ + __s32 checksum_calc; /* set to 1 when csum has been calculated */ + struct sk_buff *skb; + union { + __u32 w; + __u8 buf[4]; + } u; +}; + +/* IB - LRH header consts */ +#define IPS_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ +#define IPS_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ + +#define IPS_OFFSET 0 + +/* + * defines the cut-off point between the header queue and eager/expected + * TID queue + */ +#define NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE \ + ((sizeof(struct ips_message_header) - \ + offsetof(struct ips_message_header, iph)) >> 2) + +/* OpCodes */ +#define OPCODE_IPS 0xC0 +#define OPCODE_ITH4X 0xC1 + +/* OpCode 30 is use by stand-alone test programs */ +#define OPCODE_RAW_DATA 0xDE +/* last OpCode (31) is reserved for test */ +#define OPCODE_TEST 0xDF + +/* sub OpCodes - ips */ +#define OPCODE_SEQ_DATA 0x01 +#define OPCODE_SEQ_CTRL 0x02 + +#define OPCODE_SEQ_MQ_DATA 0x03 +#define OPCODE_SEQ_MQ_CTRL 0x04 + +#define OPCODE_ACK 0x10 +#define OPCODE_NAK 0x11 + +#define OPCODE_ERR_CHK 0x20 +#define OPCODE_ERR_CHK_PLS 0x21 + +#define OPCODE_STARTUP 0x30 +#define OPCODE_STARTUP_ACK 0x31 +#define OPCODE_STARTUP_NAK 0x32 + +#define OPCODE_STARTUP_EXT 0x34 +#define OPCODE_STARTUP_ACK_EXT 0x35 +#define OPCODE_STARTUP_NAK_EXT 0x36 + +#define OPCODE_TIDS_RELEASE 0x40 +#define OPCODE_TIDS_RELEASE_CONFIRM 0x41 + +#define OPCODE_CLOSE 0x50 +#define OPCODE_CLOSE_ACK 0x51 +/* + * like OPCODE_CLOSE, but no complaint if other side has already closed. + * Used when doing abort(), MPI_Abort(), etc. + */ +#define OPCODE_ABORT 0x52 + +/* sub OpCodes - ith4x */ +#define OPCODE_ENCAP 0x81 +#define OPCODE_LID_ARP 0x82 + +/* Receive Header Queue: receive type (from infinipath) */ +#define RCVHQ_RCV_TYPE_EXPECTED 0 +#define RCVHQ_RCV_TYPE_EAGER 1 +#define RCVHQ_RCV_TYPE_NON_KD 2 +#define RCVHQ_RCV_TYPE_ERROR 3 + +/* misc. */ +#define SIZE_OF_CRC 1 + +#define EAGER_TID_ID INFINIPATH_I_TID_MASK + +#define IPS_DEFAULT_P_KEY 0xFFFF + +#define IPS_PERMISSIVE_LID 0xFFFF +#define IPS_MULTICAST_LID_BASE 0xC000 + +#define IPS_AETH_CREDIT_SHIFT 24 +#define IPS_AETH_CREDIT_MASK 0x1F +#define IPS_AETH_CREDIT_INVAL 0x1F + +#define IPS_PSN_MASK 0xFFFFFF +#define IPS_MSN_MASK 0xFFFFFF +#define IPS_QPN_MASK 0xFFFFFF +#define IPS_MULTICAST_QPN 0xFFFFFF + +/* functions for extracting fields from rcvhdrq entries */ +static inline __u32 ips_get_hdr_err_flags(const __le32 * rbuf) +{ + return __le32_to_cpu(rbuf[1]); +} + +static inline __u32 ips_get_index(const __le32 * rbuf) +{ + return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT) + & INFINIPATH_RHF_EGRINDEX_MASK; +} + +static inline __u32 ips_get_rcv_type(const __le32 * rbuf) +{ + return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT) + & INFINIPATH_RHF_RCVTYPE_MASK; +} + +static inline __u32 ips_get_length_in_bytes(const __le32 * rbuf) +{ + return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT) + & INFINIPATH_RHF_LENGTH_MASK) << 2; +} + +static inline void *ips_get_first_protocol_header(const __u32 * rbuf) +{ + return (void *)&rbuf[2]; +} + +static inline struct ips_message_header *ips_get_ips_header(const __u32 * + rbuf) +{ + return (struct ips_message_header *)&rbuf[2]; +} + +static inline __u32 ips_get_ipath_ver(__le32 hdrword) +{ + return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT) + & INFINIPATH_I_VERS_MASK; +} + +#endif /* IPS_COMMON_H */ |