diff options
Diffstat (limited to 'drivers/media/video/cx25840/cx25840-core.c')
| -rw-r--r-- | drivers/media/video/cx25840/cx25840-core.c | 158 |
1 files changed, 154 insertions, 4 deletions
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 1da6f134888..e7bf4f4c131 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -50,7 +50,6 @@ MODULE_LICENSE("GPL"); static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; - int cx25840_debug; module_param_named(debug,cx25840_debug, int, 0644); @@ -238,7 +237,7 @@ static void cx25840_initialize(struct i2c_client *client) cx25840_write(client, 0x8d3, 0x1f); cx25840_write(client, 0x8e3, 0x03); - cx25840_vbi_setup(client); + cx25840_std_setup(client); /* trial and error says these are needed to get audio */ cx25840_write(client, 0x914, 0xa0); @@ -338,7 +337,7 @@ static void cx23885_initialize(struct i2c_client *client) finish_wait(&state->fw_wait, &wait); destroy_workqueue(q); - cx25840_vbi_setup(client); + cx25840_std_setup(client); /* (re)set input */ set_input(client, state->vid_input, state->aud_input); @@ -349,6 +348,153 @@ static void cx23885_initialize(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +void cx25840_std_setup(struct i2c_client *client) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + v4l2_std_id std = state->std; + int hblank, hactive, burst, vblank, vactive, sc; + int vblank656, src_decimation; + int luma_lpf, uv_lpf, comb; + u32 pll_int, pll_frac, pll_post; + + /* datasheet startup, step 8d */ + if (std & ~V4L2_STD_NTSC) + cx25840_write(client, 0x49f, 0x11); + else + cx25840_write(client, 0x49f, 0x14); + + if (std & V4L2_STD_625_50) { + hblank = 132; + hactive = 720; + burst = 93; + vblank = 36; + vactive = 580; + vblank656 = 40; + src_decimation = 0x21f; + luma_lpf = 2; + + if (std & V4L2_STD_SECAM) { + uv_lpf = 0; + comb = 0; + sc = 0x0a425f; + } else if (std == V4L2_STD_PAL_Nc) { + uv_lpf = 1; + comb = 0x20; + sc = 556453; + } else { + uv_lpf = 1; + comb = 0x20; + sc = 688739; + } + } else { + hactive = 720; + hblank = 122; + vactive = 487; + luma_lpf = 1; + uv_lpf = 1; + + src_decimation = 0x21f; + if (std == V4L2_STD_PAL_60) { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + luma_lpf = 2; + comb = 0x20; + sc = 688739; + } else if (std == V4L2_STD_PAL_M) { + vblank = 20; + vblank656 = 24; + burst = 0x61; + comb = 0x20; + sc = 555452; + } else { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + comb = 0x66; + sc = 556063; + } + } + + /* DEBUG: Displays configured PLL frequency */ + pll_int = cx25840_read(client, 0x108); + pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff; + pll_post = cx25840_read(client, 0x109); + v4l_dbg(1, cx25840_debug, client, + "PLL regs = int: %u, frac: %u, post: %u\n", + pll_int, pll_frac, pll_post); + + if (pll_post) { + int fin, fsc; + int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L; + + pll /= pll_post; + v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n", + pll / 1000000, pll % 1000000); + v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n", + pll / 8000000, (pll / 8) % 1000000); + + fin = ((u64)src_decimation * pll) >> 12; + v4l_dbg(1, cx25840_debug, client, + "ADC Sampling freq = %d.%06d MHz\n", + fin / 1000000, fin % 1000000); + + fsc = (((u64)sc) * pll) >> 24L; + v4l_dbg(1, cx25840_debug, client, + "Chroma sub-carrier freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); + + v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, " + "vblank %i, vactive %i, vblank656 %i, src_dec %i, " + "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, " + "sc 0x%06x\n", + hblank, hactive, vblank, vactive, vblank656, + src_decimation, burst, luma_lpf, uv_lpf, comb, sc); + } + + /* Sets horizontal blanking delay and active lines */ + cx25840_write(client, 0x470, hblank); + cx25840_write(client, 0x471, + 0xff & (((hblank >> 8) & 0x3) | (hactive << 4))); + cx25840_write(client, 0x472, hactive >> 4); + + /* Sets burst gate delay */ + cx25840_write(client, 0x473, burst); + + /* Sets vertical blanking delay and active duration */ + cx25840_write(client, 0x474, vblank); + cx25840_write(client, 0x475, + 0xff & (((vblank >> 8) & 0x3) | (vactive << 4))); + cx25840_write(client, 0x476, vactive >> 4); + cx25840_write(client, 0x477, vblank656); + + /* Sets src decimation rate */ + cx25840_write(client, 0x478, 0xff & src_decimation); + cx25840_write(client, 0x479, 0xff & (src_decimation >> 8)); + + /* Sets Luma and UV Low pass filters */ + cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); + + /* Enables comb filters */ + cx25840_write(client, 0x47b, comb); + + /* Sets SC Step*/ + cx25840_write(client, 0x47c, sc); + cx25840_write(client, 0x47d, 0xff & sc >> 8); + cx25840_write(client, 0x47e, 0xff & sc >> 16); + + /* Sets VBI parameters */ + if (std & V4L2_STD_625_50) { + cx25840_write(client, 0x47f, 0x01); + state->vbi_line_offset = 5; + } else { + cx25840_write(client, 0x47f, 0x00); + state->vbi_line_offset = 8; + } +} + +/* ----------------------------------------------------------------------- */ + static void input_change(struct i2c_client *client) { struct cx25840_state *state = i2c_get_clientdata(client); @@ -566,7 +712,7 @@ static int set_v4lstd(struct i2c_client *client) } cx25840_and_or(client, 0x400, ~0xf, fmt); cx25840_and_or(client, 0x403, ~0x3, pal_m); - cx25840_vbi_setup(client); + cx25840_std_setup(client); if (!state->is_cx25836) input_change(client); return 0; @@ -1058,6 +1204,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, switch (qc->id) { case V4L2_CID_AUDIO_VOLUME: + return v4l2_ctrl_query_fill(qc, 0, 65535, + 65535 / 100, state->default_volume); case V4L2_CID_AUDIO_MUTE: case V4L2_CID_AUDIO_BALANCE: case V4L2_CID_AUDIO_BASS: @@ -1265,6 +1413,8 @@ static int cx25840_probe(struct i2c_client *client, state->pvr150_workaround = 0; state->audmode = V4L2_TUNER_MODE_LANG1; state->unmute_volume = -1; + state->default_volume = 228 - cx25840_read(client, 0x8d4); + state->default_volume = ((state->default_volume / 2) + 23) << 9; state->vbi_line_offset = 8; state->id = id; state->rev = device_id; |