diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 80 |
1 files changed, 56 insertions, 24 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f4adf..9fe8cb7d43a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -61,6 +61,7 @@ config DUMMY config BONDING tristate "Bonding driver support" depends on INET + depends on IPV6 || IPV6=n ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet Channels together. This is called 'Etherchannel' by Cisco, @@ -829,7 +830,7 @@ config ULTRA32 config BFIN_MAC tristate "Blackfin on-chip MAC support" - depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537) + depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) select CRC32 select MII select PHYLIB @@ -978,6 +979,20 @@ config SMC911X called smc911x. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt> +config SMSC911X + tristate "SMSC LAN911x/LAN921x families embedded ethernet support" + depends on ARM || SUPERH + select CRC32 + select MII + select PHYLIB + ---help--- + Say Y here if you want support for SMSC LAN911x and LAN921x families + of ethernet controllers. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smsc911x. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on ISA @@ -1414,19 +1429,6 @@ config TC35815 depends on NET_PCI && PCI && MIPS select PHYLIB -config EEPRO100 - tristate "EtherExpressPro/100 support (eepro100, original Becker driver)" - depends on NET_PCI && PCI - select MII - help - If you have an Intel EtherExpress PRO/100 PCI network (Ethernet) - card, say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called eepro100. - - config E100 tristate "Intel(R) PRO/100+ support" depends on NET_PCI && PCI @@ -1598,7 +1600,7 @@ config 8139_OLD_RX_RESET old RX-reset behavior. If unsure, say N. config R6040 - tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)" + tristate "RDC R6040 Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 select MII @@ -1636,6 +1638,22 @@ config EPIC100 More specific information and updates are available from <http://www.scyld.com/network/epic100.html>. +config SMSC9420 + tristate "SMSC LAN9420 PCI ethernet adapter support" + depends on NET_PCI && PCI + select CRC32 + select PHYLIB + select SMSC_PHY + help + This is a driver for SMSC's LAN9420 PCI ethernet adapter. + Say Y if you want it compiled into the kernel, + and read the Ethernet-HOWTO, available from + <http://www.linuxdoc.org/docs.html#howto>. + + This driver is also available as a module. The module will be + called smsc9420. If you want to compile it as a module, say M + here and read <file:Documentation/kbuild/modules.txt> + config SUNDANCE tristate "Sundance Alta support" depends on NET_PCI && PCI @@ -1825,9 +1843,10 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM select CRC32 select PHYLIB + select PPC_BESTCOMM_FEC ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller @@ -1980,10 +1999,10 @@ config IP1000 will be called ipg. This is recommended. config IGB - tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support" + tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI ---help--- - This driver supports Intel(R) 82575 gigabit ethernet family of + This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: @@ -2275,10 +2294,6 @@ config UGETH_MAGIC_PACKET bool "Magic Packet detection support" depends on UCC_GETH -config UGETH_FILTERING - bool "Mac address filtering support" - depends on UCC_GETH - config UGETH_TX_ON_DEMAND bool "Transmit on Demand support" depends on UCC_GETH @@ -2384,9 +2399,14 @@ config CHELSIO_T1_1G Enables support for Chelsio's gigabit Ethernet PCI cards. If you are using only 10G cards say 'N' here. +config CHELSIO_T3_DEPENDS + tristate + depends on PCI && INET + default y + config CHELSIO_T3 tristate "Chelsio Communications T3 10Gb Ethernet support" - depends on PCI && INET + depends on CHELSIO_T3_DEPENDS select FW_LOADER select INET_LRO help @@ -2449,6 +2469,16 @@ config IXGBE_DCA driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. +config IXGBE_DCB + bool "Data Center Bridging (DCB) Support" + default n + depends on IXGBE && DCB + ---help--- + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + + If unsure, say N. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI @@ -2584,6 +2614,8 @@ source "drivers/net/tokenring/Kconfig" source "drivers/net/wireless/Kconfig" +source "drivers/net/wimax/Kconfig" + source "drivers/net/usb/Kconfig" source "drivers/net/pcmcia/Kconfig" @@ -2625,7 +2657,7 @@ config RIONET_RX_SIZE default "128" config FDDI - bool "FDDI driver support" + tristate "FDDI driver support" depends on (PCI || EISA || TC) help Fiber Distributed Data Interface is a high speed local area network |