diff options
Diffstat (limited to 'drivers/net/tulip/tulip_core.c')
| -rw-r--r-- | drivers/net/tulip/tulip_core.c | 33 |
1 files changed, 26 insertions, 7 deletions
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 0fa3140d65b..20696b5d60a 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -196,9 +196,13 @@ struct tulip_chip_table tulip_tbl[] = { | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, /* DM910X */ +#ifdef CONFIG_TULIP_DM910X { "Davicom DM9102/DM9102A", 128, 0x0001ebef, HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer, tulip_media_task }, +#else + { NULL }, +#endif /* RS7112 */ { "Conexant LANfinity", 256, 0x0001ebef, @@ -228,8 +232,10 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, +#ifdef CONFIG_TULIP_DM910X { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, +#endif { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, @@ -243,6 +249,7 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ + { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */ { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { } /* terminate list */ }; @@ -1299,18 +1306,30 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, } /* - * Early DM9100's need software CRC and the DMFE driver + * DM910x chips should be handled by the dmfe driver, except + * on-board chips on SPARC systems. Also, early DM9100s need + * software CRC which only the dmfe driver supports. */ - if (pdev->vendor == 0x1282 && pdev->device == 0x9100) - { - /* Read Chip revision */ - if (pdev->revision < 0x30) - { - printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); +#ifdef CONFIG_TULIP_DM910X + if (chip_idx == DM910X) { + struct device_node *dp; + + if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && + pdev->revision < 0x30) { + printk(KERN_INFO PFX + "skipping early DM9100 with Crc bug (use dmfe)\n"); + return -ENODEV; + } + + dp = pci_device_to_OF_node(pdev); + if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { + printk(KERN_INFO PFX + "skipping DM910x expansion card (use dmfe)\n"); return -ENODEV; } } +#endif /* * Looks for early PCI chipsets where people report hangs |