diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/core.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/core.c | 1923 |
1 files changed, 1923 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c new file mode 100644 index 00000000000..f6c45288d0e --- /dev/null +++ b/drivers/net/wireless/ath9k/core.c @@ -0,0 +1,1923 @@ +/* + * Copyright (c) 2008, Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + /* Implementation of the main "ATH" layer. */ + +#include "core.h" +#include "regd.h" + +static int ath_outdoor; /* enable outdoor use */ + +static const u8 ath_bcast_mac[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + +static u32 ath_chainmask_sel_up_rssi_thres = + ATH_CHAINMASK_SEL_UP_RSSI_THRES; +static u32 ath_chainmask_sel_down_rssi_thres = + ATH_CHAINMASK_SEL_DOWN_RSSI_THRES; +static u32 ath_chainmask_sel_period = + ATH_CHAINMASK_SEL_TIMEOUT; + +/* return bus cachesize in 4B word units */ + +static void bus_read_cachesize(struct ath_softc *sc, int *csz) +{ + u8 u8tmp; + + pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +} + +/* + * Set current operating mode + * + * This function initializes and fills the rate table in the ATH object based + * on the operating mode. The blink rates are also set up here, although + * they have been superceeded by the ath_led module. +*/ + +static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) +{ + const struct ath9k_rate_table *rt; + int i; + + memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap)); + rt = ath9k_hw_getratetable(sc->sc_ah, mode); + BUG_ON(!rt); + + for (i = 0; i < rt->rateCount; i++) + sc->sc_rixmap[rt->info[i].rateCode] = (u8) i; + + memzero(sc->sc_hwmap, sizeof(sc->sc_hwmap)); + for (i = 0; i < 256; i++) { + u8 ix = rt->rateCodeToIndex[i]; + + if (ix == 0xff) + continue; + + sc->sc_hwmap[i].ieeerate = + rt->info[ix].dot11Rate & IEEE80211_RATE_VAL; + sc->sc_hwmap[i].rateKbps = rt->info[ix].rateKbps; + + if (rt->info[ix].shortPreamble || + rt->info[ix].phy == PHY_OFDM) { + /* XXX: Handle this */ + } + + /* NB: this uses the last entry if the rate isn't found */ + /* XXX beware of overlow */ + } + sc->sc_currates = rt; + sc->sc_curmode = mode; + /* + * All protection frames are transmited at 2Mb/s for + * 11g, otherwise at 1Mb/s. + * XXX select protection rate index from rate table. + */ + sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); +} + +/* + * Set up rate table (legacy rates) + */ +static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) +{ + struct ath_hal *ah = sc->sc_ah; + const struct ath9k_rate_table *rt = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, maxrates; + + switch (band) { + case IEEE80211_BAND_2GHZ: + rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11G); + break; + case IEEE80211_BAND_5GHZ: + rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11A); + break; + default: + break; + } + + if (rt == NULL) + return; + + sband = &sc->sbands[band]; + rate = sc->rates[band]; + + if (rt->rateCount > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rt->rateCount; + + for (i = 0; i < maxrates; i++) { + rate[i].bitrate = rt->info[i].rateKbps / 100; + rate[i].hw_value = rt->info[i].rateCode; + sband->n_bitrates++; + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Rate: %2dMbps, ratecode: %2d\n", + __func__, + rate[i].bitrate / 10, + rate[i].hw_value); + } +} + +/* + * Set up channel list + */ +static int ath_setup_channels(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int nchan, i, a = 0, b = 0; + u8 regclassids[ATH_REGCLASSIDS_MAX]; + u32 nregclass = 0; + struct ieee80211_supported_band *band_2ghz; + struct ieee80211_supported_band *band_5ghz; + struct ieee80211_channel *chan_2ghz; + struct ieee80211_channel *chan_5ghz; + struct ath9k_channel *c; + + /* Fill in ah->ah_channels */ + if (!ath9k_regd_init_channels(ah, + ATH_CHAN_MAX, + (u32 *)&nchan, + regclassids, + ATH_REGCLASSIDS_MAX, + &nregclass, + CTRY_DEFAULT, + false, + 1)) { + u32 rd = ah->ah_currentRD; + + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to collect channel list; " + "regdomain likely %u country code %u\n", + __func__, rd, CTRY_DEFAULT); + return -EINVAL; + } + + band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; + band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; + chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; + chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; + + for (i = 0; i < nchan; i++) { + c = &ah->ah_channels[i]; + if (IS_CHAN_2GHZ(c)) { + chan_2ghz[a].band = IEEE80211_BAND_2GHZ; + chan_2ghz[a].center_freq = c->channel; + chan_2ghz[a].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_2ghz[a].flags |= + IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_2ghz[a].flags |= + IEEE80211_CHAN_PASSIVE_SCAN; + + band_2ghz->n_channels = ++a; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: 2MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, + c->channel, + c->channelFlags); + } else if (IS_CHAN_5GHZ(c)) { + chan_5ghz[b].band = IEEE80211_BAND_5GHZ; + chan_5ghz[b].center_freq = c->channel; + chan_5ghz[b].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_5ghz[b].flags |= + IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_5ghz[b].flags |= + IEEE80211_CHAN_PASSIVE_SCAN; + + band_5ghz->n_channels = ++b; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: 5MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, + c->channel, + c->channelFlags); + } + } + + return 0; +} + +/* + * Determine mode from channel flags + * + * This routine will provide the enumerated WIRELESSS_MODE value based + * on the settings of the channel flags. If ho valid set of flags + * exist, the lowest mode (11b) is selected. +*/ + +static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) +{ + if (chan->chanmode == CHANNEL_A) + return ATH9K_MODE_11A; + else if (chan->chanmode == CHANNEL_G) + return ATH9K_MODE_11G; + else if (chan->chanmode == CHANNEL_B) + return ATH9K_MODE_11B; + else if (chan->chanmode == CHANNEL_A_HT20) + return ATH9K_MODE_11NA_HT20; + else if (chan->chanmode == CHANNEL_G_HT20) + return ATH9K_MODE_11NG_HT20; + else if (chan->chanmode == CHANNEL_A_HT40PLUS) + return ATH9K_MODE_11NA_HT40PLUS; + else if (chan->chanmode == CHANNEL_A_HT40MINUS) + return ATH9K_MODE_11NA_HT40MINUS; + else if (chan->chanmode == CHANNEL_G_HT40PLUS) + return ATH9K_MODE_11NG_HT40PLUS; + else if (chan->chanmode == CHANNEL_G_HT40MINUS) + return ATH9K_MODE_11NG_HT40MINUS; + + /* NB: should not get here */ + return ATH9K_MODE_11B; +} + +/* + * Stop the device, grabbing the top-level lock to protect + * against concurrent entry through ath_init (which can happen + * if another thread does a system call and the thread doing the + * stop is preempted). + */ + +static int ath_stop(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %u\n", + __func__, sc->sc_invalid); + + /* + * Shutdown the hardware and driver: + * stop output from above + * reset 802.11 state machine + * (sends station deassoc/deauth frames) + * turn off timers + * disable interrupts + * clear transmit machinery + * clear receive machinery + * turn off the radio + * reclaim beacon resources + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + + if (!sc->sc_invalid) + ath9k_hw_set_interrupts(ah, 0); + ath_draintxq(sc, false); + if (!sc->sc_invalid) { + ath_stoprecv(sc); + ath9k_hw_phy_disable(ah); + } else + sc->sc_rxlink = NULL; + + return 0; +} + +/* + * Start Scan + * + * This function is called when starting a channel scan. It will perform + * power save wakeup processing, set the filter for the scan, and get the + * chip ready to send broadcast packets out during the scan. +*/ + +void ath_scan_start(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 rfilt; + u32 now = (u32) jiffies_to_msecs(get_timestamp()); + + sc->sc_scanning = 1; + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(ah, rfilt); + ath9k_hw_write_associd(ah, ath_bcast_mac, 0); + + /* Restore previous power management state. */ + + DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0\n", + now / 1000, now % 1000, __func__, rfilt); +} + +/* + * Scan End + * + * This routine is called by the upper layer when the scan is completed. This + * will set the filters back to normal operating mode, set the BSSID to the + * correct value, and restore the power save state. +*/ + +void ath_scan_end(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 rfilt; + u32 now = (u32) jiffies_to_msecs(get_timestamp()); + + sc->sc_scanning = 0; + /* Request for a full reset due to rx packet filter changes */ + sc->sc_full_reset = 1; + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(ah, rfilt); + ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); + + DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0x%x\n", + now / 1000, now % 1000, __func__, rfilt, sc->sc_curaid); +} + +/* + * Set the current channel + * + * Set/change channels. If the channel is really being changed, it's done + * by reseting the chip. To accomplish this we must first cleanup any pending + * DMA, then restart stuff after a la ath_init. +*/ +int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) +{ + struct ath_hal *ah = sc->sc_ah; + bool fastcc = true, stopped; + enum ath9k_ht_macmode ht_macmode; + + if (sc->sc_invalid) /* if the device is invalid or removed */ + return -EIO; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", + __func__, + ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel, + sc->sc_curchan.channelFlags), + sc->sc_curchan.channel, + ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), + hchan->channel, hchan->channelFlags); + + ht_macmode = ath_cwm_macmode(sc); + + if (hchan->channel != sc->sc_curchan.channel || + hchan->channelFlags != sc->sc_curchan.channelFlags || + sc->sc_update_chainmask || sc->sc_full_reset) { + int status; + /* + * This is only performed if the channel settings have + * actually changed. + * + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ + ath_draintxq(sc, false); /* clear pending tx frames */ + stopped = ath_stoprecv(sc); /* turn off frame recv */ + + /* XXX: do not flush receive queue here. We don't want + * to flush data frames already in queue because of + * changing channel. */ + + if (!stopped || sc->sc_full_reset) + fastcc = false; + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_opmode, hchan, + ht_macmode, sc->sc_tx_chainmask, + sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, + fastcc, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", __func__, + ath9k_hw_mhz2ieee(ah, hchan->channel, + hchan->channelFlags), + hchan->channel, hchan->channelFlags, status); + spin_unlock_bh(&sc->sc_resetlock); + return -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + sc->sc_curchan = *hchan; + sc->sc_update_chainmask = 0; + sc->sc_full_reset = 0; + + /* Re-enable rx framework */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to restart recv logic\n", __func__); + return -EIO; + } + /* + * Change channels and update the h/w rate map + * if we're switching; e.g. 11a to 11b/g. + */ + ath_setcurmode(sc, ath_chan2mode(hchan)); + + ath_update_txpow(sc); /* update tx power state */ + /* + * Re-enable interrupts. + */ + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + return 0; +} + +/**********************/ +/* Chainmask Handling */ +/**********************/ + +static void ath_chainmask_sel_timertimeout(unsigned long data) +{ + struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data; + cm->switch_allowed = 1; +} + +/* Start chainmask select timer */ +static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm) +{ + cm->switch_allowed = 0; + mod_timer(&cm->timer, ath_chainmask_sel_period); +} + +/* Stop chainmask select timer */ +static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm) +{ + cm->switch_allowed = 0; + del_timer_sync(&cm->timer); +} + +static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an) +{ + struct ath_chainmask_sel *cm = &an->an_chainmask_sel; + + memzero(cm, sizeof(struct ath_chainmask_sel)); + + cm->cur_tx_mask = sc->sc_tx_chainmask; + cm->cur_rx_mask = sc->sc_rx_chainmask; + cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER; + setup_timer(&cm->timer, + ath_chainmask_sel_timertimeout, (unsigned long) cm); +} + +int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an) +{ + struct ath_chainmask_sel *cm = &an->an_chainmask_sel; + + /* + * Disable auto-swtiching in one of the following if conditions. + * sc_chainmask_auto_sel is used for internal global auto-switching + * enabled/disabled setting + */ + if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) { + cm->cur_tx_mask = sc->sc_tx_chainmask; + return cm->cur_tx_mask; + } + + if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER) + return cm->cur_tx_mask; + + if (cm->switch_allowed) { + /* Switch down from tx 3 to tx 2. */ + if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 && + ATH_RSSI_OUT(cm->tx_avgrssi) >= + ath_chainmask_sel_down_rssi_thres) { + cm->cur_tx_mask = sc->sc_tx_chainmask; + + /* Don't let another switch happen until + * this timer expires */ + ath_chainmask_sel_timerstart(cm); + } + /* Switch up from tx 2 to 3. */ + else if (cm->cur_tx_mask == sc->sc_tx_chainmask && + ATH_RSSI_OUT(cm->tx_avgrssi) <= + ath_chainmask_sel_up_rssi_thres) { + cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3; + + /* Don't let another switch happen + * until this timer expires */ + ath_chainmask_sel_timerstart(cm); + } + } + + return cm->cur_tx_mask; +} + +/* + * Update tx/rx chainmask. For legacy association, + * hard code chainmask to 1x1, for 11n association, use + * the chainmask configuration. + */ + +void ath_update_chainmask(struct ath_softc *sc, int is_ht) +{ + sc->sc_update_chainmask = 1; + if (is_ht) { + sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; + } else { + sc->sc_tx_chainmask = 1; + sc->sc_rx_chainmask = 1; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n", + __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); +} + +/******************/ +/* VAP management */ +/******************/ + +/* + * VAP in Listen mode + * + * This routine brings the VAP out of the down state into a "listen" state + * where it waits for association requests. This is used in AP and AdHoc + * modes. +*/ + +int ath_vap_listen(struct ath_softc *sc, int if_id) +{ + struct ath_hal *ah = sc->sc_ah; + struct ath_vap *avp; + u32 rfilt = 0; + DECLARE_MAC_BUF(mac); + + avp = sc->sc_vaps[if_id]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n", + __func__, if_id); + return -EINVAL; + } + +#ifdef CONFIG_SLOW_ANT_DIV + ath_slow_ant_div_stop(&sc->sc_antdiv); +#endif + + /* update ratectrl about the new state */ + ath_rate_newstate(sc, avp); + + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(ah, rfilt); + + if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS) { + memcpy(sc->sc_curbssid, ath_bcast_mac, ETH_ALEN); + ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); + } else + sc->sc_curaid = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: RX filter 0x%x bssid %s aid 0x%x\n", + __func__, rfilt, print_mac(mac, + sc->sc_curbssid), sc->sc_curaid); + + /* + * XXXX + * Disable BMISS interrupt when we're not associated + */ + ath9k_hw_set_interrupts(ah, + sc->sc_imask & ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + /* need to reconfigure the beacons when it moves to RUN */ + sc->sc_beacons = 0; + + return 0; +} + +int ath_vap_attach(struct ath_softc *sc, + int if_id, + struct ieee80211_vif *if_data, + enum ath9k_opmode opmode) +{ + struct ath_vap *avp; + + if (if_id >= ATH_BCBUF || sc->sc_vaps[if_id] != NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Invalid interface id = %u\n", __func__, if_id); + return -EINVAL; + } + + switch (opmode) { + case ATH9K_M_STA: + case ATH9K_M_IBSS: + case ATH9K_M_MONITOR: + break; + case ATH9K_M_HOSTAP: + /* XXX not right, beacon buffer is allocated on RUN trans */ + if (list_empty(&sc->sc_bbuf)) + return -ENOMEM; + break; + default: + return -EINVAL; + } + + /* create ath_vap */ + avp = kmalloc(sizeof(struct ath_vap), GFP_KERNEL); + if (avp == NULL) + return -ENOMEM; + + memzero(avp, sizeof(struct ath_vap)); + avp->av_if_data = if_data; + /* Set the VAP opmode */ + avp->av_opmode = opmode; + avp->av_bslot = -1; + INIT_LIST_HEAD(&avp->av_mcastq.axq_q); + INIT_LIST_HEAD(&avp->av_mcastq.axq_acq); + spin_lock_init(&avp->av_mcastq.axq_lock); + + ath9k_hw_set_tsfadjust(sc->sc_ah, 1); + + sc->sc_vaps[if_id] = avp; + sc->sc_nvaps++; + /* Set the device opmode */ + sc->sc_opmode = opmode; + + /* default VAP configuration */ + avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE; + avp->av_config.av_fixed_retryset = 0x03030303; + + return 0; +} + +int ath_vap_detach(struct ath_softc *sc, int if_id) +{ + struct ath_hal *ah = sc->sc_ah; + struct ath_vap *avp; + + avp = sc->sc_vaps[if_id]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n", + __func__, if_id); + return -EINVAL; + } + + /* + * Quiesce the hardware while we remove the vap. In + * particular we need to reclaim all references to the + * vap state by any frames pending on the tx queues. + * + * XXX can we do this w/o affecting other vap's? + */ + ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ + ath_draintxq(sc, false); /* stop xmit side */ + ath_stoprecv(sc); /* stop recv side */ + ath_flushrecv(sc); /* flush recv queue */ + + /* Reclaim any pending mcast bufs on the vap. */ + ath_tx_draintxq(sc, &avp->av_mcastq, false); + + kfree(avp); + sc->sc_vaps[if_id] = NULL; + sc->sc_nvaps--; + + return 0; +} + +int ath_vap_config(struct ath_softc *sc, + int if_id, struct ath_vap_config *if_config) +{ + struct ath_vap *avp; + + if (if_id >= ATH_BCBUF) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Invalid interface id = %u\n", __func__, if_id); + return -EINVAL; + } + + avp = sc->sc_vaps[if_id]; + ASSERT(avp != NULL); + + if (avp) + memcpy(&avp->av_config, if_config, sizeof(avp->av_config)); + + return 0; +} + +/********/ +/* Core */ +/********/ + +int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; + enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", __func__, sc->sc_opmode); + + /* + * Stop anything previously setup. This is safe + * whether this is the first time through or not. + */ + ath_stop(sc); + + /* Initialize chanmask selection */ + sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; + + /* Reset SERDES registers */ + ath9k_hw_configpcipowersave(ah, 0); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + sc->sc_curchan = *initial_chan; + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, ht_macmode, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u " + "(freq %u flags 0x%x)\n", __func__, status, + sc->sc_curchan.channel, sc->sc_curchan.channelFlags); + error = -EIO; + spin_unlock_bh(&sc->sc_resetlock); + goto done; + } + spin_unlock_bh(&sc->sc_resetlock); + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath_update_txpow(sc); + + /* + * Setup the hardware after reset: + * The receive engine is set going. + * Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + error = -EIO; + goto done; + } + /* Setup our intr mask. */ + sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX + | ATH9K_INT_RXEOL | ATH9K_INT_RXORN + | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; + + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) + sc->sc_imask |= ATH9K_INT_GTT; + + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + sc->sc_imask |= ATH9K_INT_CST; + + /* + * Enable MIB interrupts when there are hardware phy counters. + * Note we only do this (at the moment) for station mode. + */ + if (ath9k_hw_phycounters(ah) && + ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS))) + sc->sc_imask |= ATH9K_INT_MIB; + /* + * Some hardware processes the TIM IE and fires an + * interrupt when the TIM bit is set. For hardware + * that does, if not overridden by configuration, + * enable the TIM interrupt when operating as station. + */ + if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && + (sc->sc_opmode == ATH9K_M_STA) && + !sc->sc_config.swBeaconProcess) + sc->sc_imask |= ATH9K_INT_TIM; + /* + * Don't enable interrupts here as we've not yet built our + * vap and node data structures, which will be needed as soon + * as we start receiving. + */ + ath_setcurmode(sc, ath_chan2mode(initial_chan)); + + /* XXX: we must make sure h/w is ready and clear invalid flag + * before turning on interrupt. */ + sc->sc_invalid = 0; +done: + return error; +} + +/* + * Reset the hardware w/o losing operational state. This is + * basically a more efficient way of doing ath_stop, ath_init, + * followed by state transitions to the current 802.11 + * operational state. Used to recover from errors rx overrun + * and to reset the hardware when rf gain settings must be reset. + */ + +static int ath_reset_start(struct ath_softc *sc, u32 flag) +{ + struct ath_hal *ah = sc->sc_ah; + + ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ + ath_draintxq(sc, flag & RESET_RETRY_TXQ); /* stop xmit side */ + ath_stoprecv(sc); /* stop recv side */ + ath_flushrecv(sc); /* flush recv queue */ + + return 0; +} + +static int ath_reset_end(struct ath_softc *sc, u32 flag) +{ + struct ath_hal *ah = sc->sc_ah; + + if (ath_startrecv(sc) != 0) /* restart recv */ + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + + /* + * We may be doing a reset in response to a request + * that changes the channel so update any state that + * might change as a result. + */ + ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan)); + + ath_update_txpow(sc); /* update tx power state */ + + if (sc->sc_beacons) + ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + ath9k_hw_set_interrupts(ah, sc->sc_imask); + + /* Restart the txq */ + if (flag & RESET_RETRY_TXQ) { + int i; + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (ATH_TXQ_SETUP(sc, i)) { + spin_lock_bh(&sc->sc_txq[i].axq_lock); + ath_txq_schedule(sc, &sc->sc_txq[i]); + spin_unlock_bh(&sc->sc_txq[i].axq_lock); + } + } + } + return 0; +} + +int ath_reset(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; + enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); + + /* NB: indicate channel change so we do a full reset */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, + ht_macmode, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u\n", + __func__, status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + return error; +} + +int ath_suspend(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + + /* No I/O if device has been surprise removed */ + if (sc->sc_invalid) + return -EIO; + + /* Shut off the interrupt before setting sc->sc_invalid to '1' */ + ath9k_hw_set_interrupts(ah, 0); + + /* XXX: we must make sure h/w will not generate any interrupt + * before setting the invalid flag. */ + sc->sc_invalid = 1; + + /* disable HAL and put h/w to sleep */ + ath9k_hw_disable(sc->sc_ah); + + ath9k_hw_configpcipowersave(sc->sc_ah, 1); + + return 0; +} + +/* Interrupt handler. Most of the actual processing is deferred. + * It's the caller's responsibility to ensure the chip is awake. */ + +irqreturn_t ath_isr(int irq, void *dev) +{ + struct ath_softc *sc = dev; + struct ath_hal *ah = sc->sc_ah; + enum ath9k_int status; + bool sched = false; + + do { + if (sc->sc_invalid) { + /* + * The hardware is not ready/present, don't + * touch anything. Note this can happen early + * on if the IRQ is shared. + */ + return IRQ_NONE; + } + if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ + return IRQ_NONE; + } + + /* + * Figure out the reason(s) for the interrupt. Note + * that the hal returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + + status &= sc->sc_imask; /* discard unasked-for bits */ + + /* + * If there are no status bits set, then this interrupt was not + * for me (should have been caught above). + */ + + if (!status) + return IRQ_NONE; + + sc->sc_intrstatus = status; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + sched = true; + } else if (status & ATH9K_INT_RXORN) { + /* need a chip reset */ + sched = true; + } else { + if (status & ATH9K_INT_SWBA) { + /* schedule a tasklet for beacon handling */ + tasklet_schedule(&sc->bcon_tasklet); + } + if (status & ATH9K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work + * at least on older hardware revs. + */ + sched = true; + } + + if (status & ATH9K_INT_TXURN) + /* bump tx trigger level */ + ath9k_hw_updatetxtriglevel(ah, true); + /* XXX: optimize this */ + if (status & ATH9K_INT_RX) + sched = true; + if (status & ATH9K_INT_TX) + sched = true; + if (status & ATH9K_INT_BMISS) + sched = true; + /* carrier sense timeout */ + if (status & ATH9K_INT_CST) + sched = true; + if (status & ATH9K_INT_MIB) { + /* + * Disable interrupts until we service the MIB + * interrupt; otherwise it will continue to + * fire. + */ + ath9k_hw_set_interrupts(ah, 0); + /* + * Let the hal handle the event. We assume + * it will clear whatever condition caused + * the interrupt. + */ + ath9k_hw_procmibevent(ah, &sc->sc_halstats); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + if (status & ATH9K_INT_TIM_TIMER) { + if (!(ah->ah_caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + /* Clear RxAbort bit so that we can + * receive frames */ + ath9k_hw_setrxabort(ah, 0); + sched = true; + } + } + } + } while (0); + + if (sched) { + /* turn off every interrupt except SWBA */ + ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); + tasklet_schedule(&sc->intr_tq); + } + + return IRQ_HANDLED; +} + +/* Deferred interrupt processing */ + +static void ath9k_tasklet(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + u32 status = sc->sc_intrstatus; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + ath_internal_reset(sc); + return; + } else { + + if (status & + (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { + /* XXX: fill me in */ + /* + if (status & ATH9K_INT_RXORN) { + } + if (status & ATH9K_INT_RXEOL) { + } + */ + spin_lock_bh(&sc->sc_rxflushlock); + ath_rx_tasklet(sc, 0); + spin_unlock_bh(&sc->sc_rxflushlock); + } + /* XXX: optimize this */ + if (status & ATH9K_INT_TX) + ath_tx_tasklet(sc); + /* XXX: fill me in */ + /* + if (status & ATH9K_INT_BMISS) { + } + if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) { + if (status & ATH9K_INT_TIM) { + } + if (status & ATH9K_INT_DTIMSYNC) { + } + } + */ + } + + /* re-enable hardware interrupt */ + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); +} + +int ath_init(u16 devid, struct ath_softc *sc) +{ + struct ath_hal *ah = NULL; + int status; + int error = 0, i; + int csz = 0; + u32 rd; + + /* XXX: hardware will not be ready until ath_open() being called */ + sc->sc_invalid = 1; + + sc->sc_debug = DBG_DEFAULT; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: devid 0x%x\n", __func__, devid); + + /* Initialize tasklet */ + tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); + tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, + (unsigned long)sc); + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + bus_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->sc_cachelsz = csz << 2; /* convert to bytes */ + + spin_lock_init(&sc->sc_resetlock); + + ah = ath9k_hw_attach(devid, sc, sc->mem, &status); + if (ah == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to attach hardware; HAL status %u\n", + __func__, status); + error = -ENXIO; + goto bad; + } + sc->sc_ah = ah; + + /* Get the chipset-specific aggr limit. */ + sc->sc_rtsaggrlimit = ah->ah_caps.rts_aggr_limit; + + /* Get the hardware key cache size. */ + sc->sc_keymax = ah->ah_caps.keycache_size; + if (sc->sc_keymax > ATH_KEYMAX) { + DPRINTF(sc, ATH_DBG_KEYCACHE, + "%s: Warning, using only %u entries in %u key cache\n", + __func__, ATH_KEYMAX, sc->sc_keymax); + sc->sc_keymax = ATH_KEYMAX; + } + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < sc->sc_keymax; i++) + ath9k_hw_keyreset(ah, (u16) i); + /* + * Mark key cache slots associated with global keys + * as in use. If we knew TKIP was not to be used we + * could leave the +32, +64, and +32+64 slots free. + * XXX only for splitmic. + */ + for (i = 0; i < IEEE80211_WEP_NKID; i++) { + set_bit(i, sc->sc_keymap); + set_bit(i + 32, sc->sc_keymap); + set_bit(i + 64, sc->sc_keymap); + set_bit(i + 32 + 64, sc->sc_keymap); + } + /* + * Collect the channel list using the default country + * code and including outdoor channels. The 802.11 layer + * is resposible for filtering this list based on settings + * like the phy mode. + */ + rd = ah->ah_currentRD; + + error = ath_setup_channels(sc); + if (error) + goto bad; + + /* default to STA mode */ + sc->sc_opmode = ATH9K_M_MONITOR; + + /* Setup rate tables */ + + ath_setup_rates(sc, IEEE80211_BAND_2GHZ); + ath_setup_rates(sc, IEEE80211_BAND_5GHZ); + + /* NB: setup here so ath_rate_update is happy */ + ath_setcurmode(sc, ATH9K_MODE_11A); + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that the hal handles reseting + * these queues at the needed time. + */ + sc->sc_bhalq = ath_beaconq_setup(ah); + if (sc->sc_bhalq == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup a beacon xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); + if (sc->sc_cabq == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup CAB xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + + sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; + ath_cabq_update(sc); + + for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++) + sc->sc_haltype2q[i] = -1; + + /* Setup data queues */ + /* NB: ensure BK queue is the lowest priority h/w queue */ + if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BK traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BE traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VI traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VO traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + sc->sc_rc = ath_rate_attach(ah); + if (sc->sc_rc == NULL) { + error = EIO; + goto bad2; + } + + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL)) { + /* + * Whether we should enable h/w TKIP MIC. + * XXX: if we don't support WME TKIP MIC, then we wouldn't + * report WMM capable, so it's always safe to turn on + * TKIP MIC in this case. + */ + ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, + 0, 1, NULL); + } + + /* + * Check whether the separate key cache entries + * are required to handle both tx+rx MIC keys. + * With split mic keys the number of stations is limited + * to 27 otherwise 59. + */ + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_MIC, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, + 0, NULL)) + sc->sc_splitmic = 1; + + /* turn on mcast key search if possible */ + if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) + (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, + 1, NULL); + + sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; + sc->sc_config.txpowlimit_override = 0; + + /* 11n Capabilities */ + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { + sc->sc_txaggr = 1; + sc->sc_rxaggr = 1; + } + + sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; + + /* Configuration for rx chain detection */ + sc->sc_rxchaindetect_ref = 0; + sc->sc_rxchaindetect_thresh5GHz = 35; + sc->sc_rxchaindetect_thresh2GHz = 35; + sc->sc_rxchaindetect_delta5GHz = 30; + sc->sc_rxchaindetect_delta2GHz = 30; + + ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); + sc->sc_defant = ath9k_hw_getdefantenna(ah); + + ath9k_hw_getmac(ah, sc->sc_myaddr); + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { + ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); + ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); + ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); + } + sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ + + /* initialize beacon slots */ + for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++) + sc->sc_bslot[i] = ATH_IF_ID_ANY; + + /* save MISC configurations */ + sc->sc_config.swBeaconProcess = 1; + +#ifdef CONFIG_SLOW_ANT_DIV + /* range is 40 - 255, we use something in the middle */ + ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127); +#endif + + return 0; +bad2: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->sc_txq[i]); +bad: + if (ah) + ath9k_hw_detach(ah); + return error; +} + +void ath_deinit(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int i; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__); + + ath_stop(sc); + if (!sc->sc_invalid) + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); + ath_rate_detach(sc->sc_rc); + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->sc_txq[i]); + ath9k_hw_detach(ah); +} + +/*******************/ +/* Node Management */ +/*******************/ + +struct ath_node *ath_node_attach(struct ath_softc *sc, u8 *addr, int if_id) +{ + struct ath_vap *avp; + struct ath_node *an; + DECLARE_MAC_BUF(mac); + + avp = sc->sc_vaps[if_id]; + ASSERT(avp != NULL); + + /* mac80211 sta_notify callback is from an IRQ context, so no sleep */ + an = kmalloc(sizeof(struct ath_node), GFP_ATOMIC); + if (an == NULL) + return NULL; + memzero(an, sizeof(*an)); + + an->an_sc = sc; + memcpy(an->an_addr, addr, ETH_ALEN); + atomic_set(&an->an_refcnt, 1); + + /* set up per-node tx/rx state */ + ath_tx_node_init(sc, an); + ath_rx_node_init(sc, an); + + ath_chainmask_sel_init(sc, an); + ath_chainmask_sel_timerstart(&an->an_chainmask_sel); + list_add(&an->list, &sc->node_list); + + return an; +} + +void ath_node_detach(struct ath_softc *sc, struct ath_node *an, bool bh_flag) +{ + unsigned long flags; + + DECLARE_MAC_BUF(mac); + + ath_chainmask_sel_timerstop(&an->an_chainmask_sel); + an->an_flags |= ATH_NODE_CLEAN; + ath_tx_node_cleanup(sc, an, bh_flag); + ath_rx_node_cleanup(sc, an); + + ath_tx_node_free(sc, an); + ath_rx_node_free(sc, an); + + spin_lock_irqsave(&sc->node_lock, flags); + + list_del(&an->list); + + spin_unlock_irqrestore(&sc->node_lock, flags); + + kfree(an); +} + +/* Finds a node and increases the refcnt if found */ + +struct ath_node *ath_node_get(struct ath_softc *sc, u8 *addr) +{ + struct ath_node *an = NULL, *an_found = NULL; + + if (list_empty(&sc->node_list)) /* FIXME */ + goto out; + list_for_each_entry(an, &sc->node_list, list) { + if (!compare_ether_addr(an->an_addr, addr)) { + atomic_inc(&an->an_refcnt); + an_found = an; + break; + } + } +out: + return an_found; +} + +/* Decrements the refcnt and if it drops to zero, detach the node */ + +void ath_node_put(struct ath_softc *sc, struct ath_node *an, bool bh_flag) +{ + if (atomic_dec_and_test(&an->an_refcnt)) + ath_node_detach(sc, an, bh_flag); +} + +/* Finds a node, doesn't increment refcnt. Caller must hold sc->node_lock */ +struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr) +{ + struct ath_node *an = NULL, *an_found = NULL; + + if (list_empty(&sc->node_list)) + return NULL; + + list_for_each_entry(an, &sc->node_list, list) + if (!compare_ether_addr(an->an_addr, addr)) { + an_found = an; + break; + } + + return an_found; +} + +/* + * Set up New Node + * + * Setup driver-specific state for a newly associated node. This routine + * really only applies if compression or XR are enabled, there is no code + * covering any other cases. +*/ + +void ath_newassoc(struct ath_softc *sc, + struct ath_node *an, int isnew, int isuapsd) +{ + int tidno; + + /* if station reassociates, tear down the aggregation state. */ + if (!isnew) { + for (tidno = 0; tidno < WME_NUM_TID; tidno++) { + if (sc->sc_txaggr) + ath_tx_aggr_teardown(sc, an, tidno); + if (sc->sc_rxaggr) + ath_rx_aggr_teardown(sc, an, tidno); + } + } + an->an_flags = 0; +} + +/**************/ +/* Encryption */ +/**************/ + +void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot) +{ + ath9k_hw_keyreset(sc->sc_ah, keyix); + if (freeslot) + clear_bit(keyix, sc->sc_keymap); +} + +int ath_keyset(struct ath_softc *sc, + u16 keyix, + struct ath9k_keyval *hk, + const u8 mac[ETH_ALEN]) +{ + bool status; + + status = ath9k_hw_set_keycache_entry(sc->sc_ah, + keyix, hk, mac, false); + + return status != false; +} + +/***********************/ +/* TX Power/Regulatory */ +/***********************/ + +/* + * Set Transmit power in HAL + * + * This routine makes the actual HAL calls to set the new transmit power + * limit. +*/ + +void ath_update_txpow(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 txpow; + + if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { + ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); + /* read back in case value is clamped */ + ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); + sc->sc_curtxpow = txpow; + } +} + +/* Return the current country and domain information */ +void ath_get_currentCountry(struct ath_softc *sc, + struct ath9k_country_entry *ctry) +{ + ath9k_regd_get_current_country(sc->sc_ah, ctry); + + /* If HAL not specific yet, since it is band dependent, + * use the one we passed in. */ + if (ctry->countryCode == CTRY_DEFAULT) { + ctry->iso[0] = 0; + ctry->iso[1] = 0; + } else if (ctry->iso[0] && ctry->iso[1]) { + if (!ctry->iso[2]) { + if (ath_outdoor) + ctry->iso[2] = 'O'; + else + ctry->iso[2] = 'I'; + } + } +} + +/**************************/ +/* Slow Antenna Diversity */ +/**************************/ + +void ath_slow_ant_div_init(struct ath_antdiv *antdiv, + struct ath_softc *sc, + int32_t rssitrig) +{ + int trig; + + /* antdivf_rssitrig can range from 40 - 0xff */ + trig = (rssitrig > 0xff) ? 0xff : rssitrig; + trig = (rssitrig < 40) ? 40 : rssitrig; + + antdiv->antdiv_sc = sc; + antdiv->antdivf_rssitrig = trig; +} + +void ath_slow_ant_div_start(struct ath_antdiv *antdiv, + u8 num_antcfg, + const u8 *bssid) +{ + antdiv->antdiv_num_antcfg = + num_antcfg < ATH_ANT_DIV_MAX_CFG ? + num_antcfg : ATH_ANT_DIV_MAX_CFG; + antdiv->antdiv_state = ATH_ANT_DIV_IDLE; + antdiv->antdiv_curcfg = 0; + antdiv->antdiv_bestcfg = 0; + antdiv->antdiv_laststatetsf = 0; + + memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid)); + + antdiv->antdiv_start = 1; +} + +void ath_slow_ant_div_stop(struct ath_antdiv *antdiv) +{ + antdiv->antdiv_start = 0; +} + +static int32_t ath_find_max_val(int32_t *val, + u8 num_val, u8 *max_index) +{ + u32 MaxVal = *val++; + u32 cur_index = 0; + + *max_index = 0; + while (++cur_index < num_val) { + if (*val > MaxVal) { + MaxVal = *val; + *max_index = cur_index; + } + + val++; + } + + return MaxVal; +} + +void ath_slow_ant_div(struct ath_antdiv *antdiv, + struct ieee80211_hdr *hdr, + struct ath_rx_status *rx_stats) +{ + struct ath_softc *sc = antdiv->antdiv_sc; + struct ath_hal *ah = sc->sc_ah; + u64 curtsf = 0; + u8 bestcfg, curcfg = antdiv->antdiv_curcfg; + __le16 fc = hdr->frame_control; + + if (antdiv->antdiv_start && ieee80211_is_beacon(fc) + && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) { + antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi; + antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah); + curtsf = antdiv->antdiv_lastbtsf[curcfg]; + } else { + return; + } + + switch (antdiv->antdiv_state) { + case ATH_ANT_DIV_IDLE: + if ((antdiv->antdiv_lastbrssi[curcfg] < + antdiv->antdivf_rssitrig) + && ((curtsf - antdiv->antdiv_laststatetsf) > + ATH_ANT_DIV_MIN_IDLE_US)) { + + curcfg++; + if (curcfg == antdiv->antdiv_num_antcfg) + curcfg = 0; + + if (!ath9k_hw_select_antconfig(ah, curcfg)) { + antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg; + antdiv->antdiv_curcfg = curcfg; + antdiv->antdiv_laststatetsf = curtsf; + antdiv->antdiv_state = ATH_ANT_DIV_SCAN; + } + } + break; + + case ATH_ANT_DIV_SCAN: + if ((curtsf - antdiv->antdiv_laststatetsf) < + ATH_ANT_DIV_MIN_SCAN_US) + break; + + curcfg++; + if (curcfg == antdiv->antdiv_num_antcfg) + curcfg = 0; + + if (curcfg == antdiv->antdiv_bestcfg) { + ath_find_max_val(antdiv->antdiv_lastbrssi, + antdiv->antdiv_num_antcfg, &bestcfg); + if (!ath9k_hw_select_antconfig(ah, bestcfg)) { + antdiv->antdiv_bestcfg = bestcfg; + antdiv->antdiv_curcfg = bestcfg; + antdiv->antdiv_laststatetsf = curtsf; + antdiv->antdiv_state = ATH_ANT_DIV_IDLE; + } + } else { + if (!ath9k_hw_select_antconfig(ah, curcfg)) { + antdiv->antdiv_curcfg = curcfg; + antdiv->antdiv_laststatetsf = curtsf; + antdiv->antdiv_state = ATH_ANT_DIV_SCAN; + } + } + + break; + } +} + +/***********************/ +/* Descriptor Handling */ +/***********************/ + +/* + * Set up DMA descriptors + * + * This function will allocate both the DMA descriptor structure, and the + * buffers it contains. These are used to contain the descriptors used + * by the system. +*/ + +int ath_descdma_setup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head, + const char *name, + int nbuf, + int ndesc) +{ +#define DS2PHYS(_dd, _ds) \ + ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) +#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) +#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) + + struct ath_desc *ds; + struct ath_buf *bf; + int i, bsize, error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n", + __func__, name, nbuf, ndesc); + + /* ath_desc must be a multiple of DWORDs */ + if ((sizeof(struct ath_desc) % 4) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n", + __func__); + ASSERT((sizeof(struct ath_desc) % 4) == 0); + error = -ENOMEM; + goto fail; + } + + dd->dd_name = name; + dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; + + /* + * Need additional DMA memory because we can't use + * descriptors that cross the 4K page boundary. Assume + * one skipped descriptor per 4K page. + */ + if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { + u32 ndesc_skipped = + ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); + u32 dma_len; + + while (ndesc_skipped) { + dma_len = ndesc_skipped * sizeof(struct ath_desc); + dd->dd_desc_len += dma_len; + + ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); + }; + } + + /* allocate descriptors */ + dd->dd_desc = pci_alloc_consistent(sc->pdev, + dd->dd_desc_len, + &dd->dd_desc_paddr); + if (dd->dd_desc == NULL) { + error = -ENOMEM; + goto fail; + } + ds = dd->dd_desc; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n", + __func__, dd->dd_name, ds, (u32) dd->dd_desc_len, + ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); + + /* allocate buffers */ + bsize = sizeof(struct ath_buf) * nbuf; + bf = kmalloc(bsize, GFP_KERNEL); + if (bf == NULL) { + error = -ENOMEM; + goto fail2; + } + memzero(bf, bsize); + dd->dd_bufptr = bf; + + INIT_LIST_HEAD(head); + for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->ah_caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + ASSERT((caddr_t) bf->bf_desc < + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += ndesc; + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); + } + return 0; +fail2: + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); +fail: + memzero(dd, sizeof(*dd)); + return error; +#undef ATH_DESC_4KB_BOUND_CHECK +#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED +#undef DS2PHYS +} + +/* + * Cleanup DMA descriptors + * + * This function will free the DMA block that was allocated for the descriptor + * pool. Since this was allocated as one "chunk", it is freed in the same + * manner. +*/ + +void ath_descdma_cleanup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head) +{ + /* Free memory associated with descriptors */ + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); + + INIT_LIST_HEAD(head); + kfree(dd->dd_bufptr); + memzero(dd, sizeof(*dd)); +} + +/*************/ +/* Utilities */ +/*************/ + +void ath_internal_reset(struct ath_softc *sc) +{ + ath_reset_start(sc, 0); + ath_reset(sc); + ath_reset_end(sc, 0); +} + +int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case 0: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO]; + break; + case 1: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI]; + break; + case 2: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + case 3: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK]; + break; + default: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + } + + return qnum; +} + +int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case ATH9K_WME_AC_VO: + qnum = 0; + break; + case ATH9K_WME_AC_VI: + qnum = 1; + break; + case ATH9K_WME_AC_BE: + qnum = 2; + break; + case ATH9K_WME_AC_BK: + qnum = 3; + break; + default: + qnum = -1; + break; + } + + return qnum; +} + + +/* + * Expand time stamp to TSF + * + * Extend 15-bit time stamp from rx descriptor to + * a full 64-bit TSF using the current h/w TSF. +*/ + +u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) +{ + u64 tsf; + + tsf = ath9k_hw_gettsf64(sc->sc_ah); + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + return (tsf & ~0x7fff) | rstamp; +} + +/* + * Set Default Antenna + * + * Call into the HAL to set the default antenna to use. Not really valid for + * MIMO technology. +*/ + +void ath_setdefantenna(void *context, u32 antenna) +{ + struct ath_softc *sc = (struct ath_softc *)context; + struct ath_hal *ah = sc->sc_ah; + + /* XXX block beacon interrupts */ + ath9k_hw_setantenna(ah, antenna); + sc->sc_defant = antenna; + sc->sc_rxotherant = 0; +} + +/* + * Set Slot Time + * + * This will wake up the chip if required, and set the slot time for the + * frame (maximum transmit time). Slot time is assumed to be already set + * in the ATH object member sc_slottime +*/ + +void ath_setslottime(struct ath_softc *sc) +{ + ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime); + sc->sc_updateslot = OK; +} |