aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43')
-rw-r--r--drivers/net/wireless/b43/Kconfig12
-rw-r--r--drivers/net/wireless/b43/Makefile7
-rw-r--r--drivers/net/wireless/b43/b43.h146
-rw-r--r--drivers/net/wireless/b43/debugfs.c79
-rw-r--r--drivers/net/wireless/b43/lo.c120
-rw-r--r--drivers/net/wireless/b43/lo.h4
-rw-r--r--drivers/net/wireless/b43/main.c404
-rw-r--r--drivers/net/wireless/b43/phy.h340
-rw-r--r--drivers/net/wireless/b43/phy_a.c643
-rw-r--r--drivers/net/wireless/b43/phy_a.h130
-rw-r--r--drivers/net/wireless/b43/phy_common.c381
-rw-r--r--drivers/net/wireless/b43/phy_common.h413
-rw-r--r--drivers/net/wireless/b43/phy_g.c (renamed from drivers/net/wireless/b43/phy.c)4420
-rw-r--r--drivers/net/wireless/b43/phy_g.h209
-rw-r--r--drivers/net/wireless/b43/phy_lp.c155
-rw-r--r--drivers/net/wireless/b43/phy_lp.h540
-rw-r--r--drivers/net/wireless/b43/phy_n.c (renamed from drivers/net/wireless/b43/nphy.c)154
-rw-r--r--drivers/net/wireless/b43/phy_n.h (renamed from drivers/net/wireless/b43/nphy.h)54
-rw-r--r--drivers/net/wireless/b43/rfkill.c28
-rw-r--r--drivers/net/wireless/b43/sysfs.c23
-rw-r--r--drivers/net/wireless/b43/tables.c43
-rw-r--r--drivers/net/wireless/b43/tables_nphy.c4
-rw-r--r--drivers/net/wireless/b43/wa.c2
-rw-r--r--drivers/net/wireless/b43/xmit.c14
24 files changed, 4861 insertions, 3464 deletions
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 1fa043d1802..1f81d36f87c 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -80,6 +80,18 @@ config B43_NPHY
SAY N.
+config B43_PHY_LP
+ bool "IEEE 802.11g LP-PHY support (BROKEN)"
+ depends on B43 && EXPERIMENTAL && BROKEN
+ ---help---
+ Support for the LP-PHY.
+ The LP-PHY is an IEEE 802.11g based PHY built into some notebooks
+ and embedded devices.
+
+ THIS IS BROKEN AND DOES NOT WORK YET.
+
+ SAY N.
+
# This config option automatically enables b43 LEDS support,
# if it's possible.
config B43_LEDS
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 8c52b0b9862..14a02b3aea5 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -1,8 +1,11 @@
b43-y += main.o
b43-y += tables.o
b43-$(CONFIG_B43_NPHY) += tables_nphy.o
-b43-y += phy.o
-b43-$(CONFIG_B43_NPHY) += nphy.o
+b43-y += phy_common.o
+b43-y += phy_g.o
+b43-y += phy_a.o
+b43-$(CONFIG_B43_NPHY) += phy_n.o
+b43-$(CONFIG_B43_PHY_LP) += phy_lp.o
b43-y += sysfs.o
b43-y += xmit.o
b43-y += lo.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index edcdfa36645..427b8203e3f 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -12,7 +12,7 @@
#include "leds.h"
#include "rfkill.h"
#include "lo.h"
-#include "phy.h"
+#include "phy_common.h"
/* The unique identifier of the firmware that's officially supported by
@@ -173,6 +173,11 @@ enum {
#define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */
#define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */
#define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */
+/* TSSI information */
+#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */
+#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */
+#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */
+#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */
/* SHM_SHARED TX FIFO variables */
#define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */
#define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */
@@ -508,122 +513,6 @@ struct b43_iv {
} __attribute__((__packed__));
-struct b43_phy {
- /* Band support flags. */
- bool supports_2ghz;
- bool supports_5ghz;
-
- /* GMODE bit enabled? */
- bool gmode;
-
- /* Analog Type */
- u8 analog;
- /* B43_PHYTYPE_ */
- u8 type;
- /* PHY revision number. */
- u8 rev;
-
- /* Radio versioning */
- u16 radio_manuf; /* Radio manufacturer */
- u16 radio_ver; /* Radio version */
- u8 radio_rev; /* Radio revision */
-
- bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */
-
- /* ACI (adjacent channel interference) flags. */
- bool aci_enable;
- bool aci_wlan_automatic;
- bool aci_hw_rssi;
-
- /* Radio switched on/off */
- bool radio_on;
- struct {
- /* Values saved when turning the radio off.
- * They are needed when turning it on again. */
- bool valid;
- u16 rfover;
- u16 rfoverval;
- } radio_off_context;
-
- u16 minlowsig[2];
- u16 minlowsigpos[2];
-
- /* TSSI to dBm table in use */
- const s8 *tssi2dbm;
- /* Target idle TSSI */
- int tgt_idle_tssi;
- /* Current idle TSSI */
- int cur_idle_tssi;
-
- /* LocalOscillator control values. */
- struct b43_txpower_lo_control *lo_control;
- /* Values from b43_calc_loopback_gain() */
- s16 max_lb_gain; /* Maximum Loopback gain in hdB */
- s16 trsw_rx_gain; /* TRSW RX gain in hdB */
- s16 lna_lod_gain; /* LNA lod */
- s16 lna_gain; /* LNA */
- s16 pga_gain; /* PGA */
-
- /* Desired TX power level (in dBm).
- * This is set by the user and adjusted in b43_phy_xmitpower(). */
- u8 power_level;
- /* A-PHY TX Power control value. */
- u16 txpwr_offset;
-
- /* Current TX power level attenuation control values */
- struct b43_bbatt bbatt;
- struct b43_rfatt rfatt;
- u8 tx_control; /* B43_TXCTL_XXX */
-
- /* Hardware Power Control enabled? */
- bool hardware_power_control;
-
- /* Current Interference Mitigation mode */
- int interfmode;
- /* Stack of saved values from the Interference Mitigation code.
- * Each value in the stack is layed out as follows:
- * bit 0-11: offset
- * bit 12-15: register ID
- * bit 16-32: value
- * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
- */
-#define B43_INTERFSTACK_SIZE 26
- u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure
-
- /* Saved values from the NRSSI Slope calculation */
- s16 nrssi[2];
- s32 nrssislope;
- /* In memory nrssi lookup table. */
- s8 nrssi_lt[64];
-
- /* current channel */
- u8 channel;
-
- u16 lofcal;
-
- u16 initval; //FIXME rename?
-
- /* PHY TX errors counter. */
- atomic_t txerr_cnt;
-
- /* The device does address auto increment for the OFDM tables.
- * We cache the previously used address here and omit the address
- * write on the next table access, if possible. */
- u16 ofdmtab_addr; /* The address currently set in hardware. */
- enum { /* The last data flow direction. */
- B43_OFDMTAB_DIRECTION_UNKNOWN = 0,
- B43_OFDMTAB_DIRECTION_READ,
- B43_OFDMTAB_DIRECTION_WRITE,
- } ofdmtab_addr_direction;
-
-#if B43_DEBUG
- /* Manual TX-power control enabled? */
- bool manual_txpower_control;
- /* PHY registers locked by b43_phy_lock()? */
- bool phy_locked;
-#endif /* B43_DEBUG */
-};
-
/* Data structures for DMA transmission, per 80211 core. */
struct b43_dma {
struct b43_dmaring *tx_ring_AC_BK; /* Background */
@@ -680,7 +569,7 @@ struct b43_key {
#define B43_QOS_VOICE B43_QOS_PARAMS(3)
/* QOS parameter hardware data structure offsets. */
-#define B43_NR_QOSPARAMS 22
+#define B43_NR_QOSPARAMS 16
enum {
B43_QOSPARAM_TXOP = 0,
B43_QOSPARAM_CWMIN,
@@ -696,8 +585,6 @@ enum {
struct b43_qos_params {
/* The QOS parameters */
struct ieee80211_tx_queue_params p;
- /* Does this need to get uploaded to hardware? */
- bool need_hw_update;
};
struct b43_wldev;
@@ -759,11 +646,13 @@ struct b43_wl {
bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
- /* The current QOS parameters for the 4 queues.
- * This is protected by the irq_lock. */
+ /* The current QOS parameters for the 4 queues. */
struct b43_qos_params qos_params[4];
- /* Workqueue for updating QOS parameters in hardware. */
- struct work_struct qos_update_work;
+
+ /* Work for adjustment of the transmission power.
+ * This is scheduled when we determine that the actual TX output
+ * power doesn't match what we want. */
+ struct work_struct txpower_adjust_work;
};
/* In-memory representation of a cached microcode file. */
@@ -908,6 +797,15 @@ static inline int b43_is_mode(struct b43_wl *wl, int type)
return (wl->operating && wl->if_type == type);
}
+/**
+ * b43_current_band - Returns the currently used band.
+ * Returns one of IEEE80211_BAND_2GHZ and IEEE80211_BAND_5GHZ.
+ */
+static inline enum ieee80211_band b43_current_band(struct b43_wl *wl)
+{
+ return wl->hw->conf.channel->band;
+}
+
static inline u16 b43_read16(struct b43_wldev *dev, u16 offset)
{
return ssb_read16(dev->dev, offset);
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 29851bc1101..06a01da8016 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -443,76 +443,6 @@ out_unlock:
return count;
}
-static ssize_t txpower_g_read_file(struct b43_wldev *dev,
- char *buf, size_t bufsize)
-{
- ssize_t count = 0;
-
- if (dev->phy.type != B43_PHYTYPE_G) {
- fappend("Device is not a G-PHY\n");
- goto out;
- }
- fappend("Control: %s\n", dev->phy.manual_txpower_control ?
- "MANUAL" : "AUTOMATIC");
- fappend("Baseband attenuation: %u\n", dev->phy.bbatt.att);
- fappend("Radio attenuation: %u\n", dev->phy.rfatt.att);
- fappend("TX Mixer Gain: %s\n",
- (dev->phy.tx_control & B43_TXCTL_TXMIX) ? "ON" : "OFF");
- fappend("PA Gain 2dB: %s\n",
- (dev->phy.tx_control & B43_TXCTL_PA2DB) ? "ON" : "OFF");
- fappend("PA Gain 3dB: %s\n",
- (dev->phy.tx_control & B43_TXCTL_PA3DB) ? "ON" : "OFF");
- fappend("\n\n");
- fappend("You can write to this file:\n");
- fappend("Writing \"auto\" enables automatic txpower control.\n");
- fappend
- ("Writing the attenuation values as \"bbatt rfatt txmix pa2db pa3db\" "
- "enables manual txpower control.\n");
- fappend("Example: 5 4 0 0 1\n");
- fappend("Enables manual control with Baseband attenuation 5, "
- "Radio attenuation 4, No TX Mixer Gain, "
- "No PA Gain 2dB, With PA Gain 3dB.\n");
-out:
- return count;
-}
-
-static int txpower_g_write_file(struct b43_wldev *dev,
- const char *buf, size_t count)
-{
- if (dev->phy.type != B43_PHYTYPE_G)
- return -ENODEV;
- if ((count >= 4) && (memcmp(buf, "auto", 4) == 0)) {
- /* Automatic control */
- dev->phy.manual_txpower_control = 0;
- b43_phy_xmitpower(dev);
- } else {
- int bbatt = 0, rfatt = 0, txmix = 0, pa2db = 0, pa3db = 0;
- /* Manual control */
- if (sscanf(buf, "%d %d %d %d %d", &bbatt, &rfatt,
- &txmix, &pa2db, &pa3db) != 5)
- return -EINVAL;
- b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
- dev->phy.manual_txpower_control = 1;
- dev->phy.bbatt.att = bbatt;
- dev->phy.rfatt.att = rfatt;
- dev->phy.tx_control = 0;
- if (txmix)
- dev->phy.tx_control |= B43_TXCTL_TXMIX;
- if (pa2db)
- dev->phy.tx_control |= B43_TXCTL_PA2DB;
- if (pa3db)
- dev->phy.tx_control |= B43_TXCTL_PA3DB;
- b43_phy_lock(dev);
- b43_radio_lock(dev);
- b43_set_txpower_g(dev, &dev->phy.bbatt,
- &dev->phy.rfatt, dev->phy.tx_control);
- b43_radio_unlock(dev);
- b43_phy_unlock(dev);
- }
-
- return 0;
-}
-
/* wl->irq_lock is locked */
static int restart_write_file(struct b43_wldev *dev,
const char *buf, size_t count)
@@ -560,7 +490,7 @@ static ssize_t loctls_read_file(struct b43_wldev *dev,
err = -ENODEV;
goto out;
}
- lo = phy->lo_control;
+ lo = phy->g->lo_control;
fappend("-- Local Oscillator calibration data --\n\n");
fappend("HW-power-control enabled: %d\n",
dev->phy.hardware_power_control);
@@ -578,8 +508,8 @@ static ssize_t loctls_read_file(struct b43_wldev *dev,
list_for_each_entry(cal, &lo->calib_list, list) {
bool active;
- active = (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) &&
- b43_compare_rfatt(&cal->rfatt, &phy->rfatt));
+ active = (b43_compare_bbatt(&cal->bbatt, &phy->g->bbatt) &&
+ b43_compare_rfatt(&cal->rfatt, &phy->g->rfatt));
fappend("BB(%d), RF(%d,%d) -> I=%d, Q=%d "
"(expires in %lu sec)%s\n",
cal->bbatt.att,
@@ -763,7 +693,6 @@ B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1);
B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1);
B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1);
B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0);
-B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0);
B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1);
B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0);
@@ -877,7 +806,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev)
ADD_FILE(mmio32write, 0200);
ADD_FILE(tsf, 0600);
ADD_FILE(txstat, 0400);
- ADD_FILE(txpower_g, 0600);
ADD_FILE(restart, 0200);
ADD_FILE(loctls, 0400);
@@ -907,7 +835,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev)
debugfs_remove(e->file_mmio32write.dentry);
debugfs_remove(e->file_tsf.dentry);
debugfs_remove(e->file_txstat.dentry);
- debugfs_remove(e->file_txpower_g.dentry);
debugfs_remove(e->file_restart.dentry);
debugfs_remove(e->file_loctls.dentry);
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 9c854d6aae3..6a18a147046 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -29,7 +29,7 @@
#include "b43.h"
#include "lo.h"
-#include "phy.h"
+#include "phy_g.h"
#include "main.h"
#include <linux/delay.h>
@@ -174,7 +174,8 @@ static u16 lo_txctl_register_table(struct b43_wldev *dev,
static void lo_measure_txctl_values(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
u16 reg, mask;
u16 trsw_rx, pga;
u16 radio_pctl_reg;
@@ -195,7 +196,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev)
int lb_gain; /* Loopback gain (in dB) */
trsw_rx = 0;
- lb_gain = phy->max_lb_gain / 2;
+ lb_gain = gphy->max_lb_gain / 2;
if (lb_gain > 10) {
radio_pctl_reg = 0;
pga = abs(10 - lb_gain) / 6;
@@ -226,7 +227,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev)
}
b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
& 0xFFF0) | radio_pctl_reg);
- b43_phy_set_baseband_attenuation(dev, 2);
+ b43_gphy_set_baseband_attenuation(dev, 2);
reg = lo_txctl_register_table(dev, &mask, NULL);
mask = ~mask;
@@ -277,7 +278,8 @@ static void lo_measure_txctl_values(struct b43_wldev *dev)
static void lo_read_power_vector(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
int i;
u64 tmp;
u64 power_vector = 0;
@@ -298,6 +300,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev,
s16 max_rx_gain, int use_trsw_rx)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
u16 tmp;
if (max_rx_gain < 0)
@@ -308,7 +311,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev,
int trsw_rx_gain;
if (use_trsw_rx) {
- trsw_rx_gain = phy->trsw_rx_gain / 2;
+ trsw_rx_gain = gphy->trsw_rx_gain / 2;
if (max_rx_gain >= trsw_rx_gain) {
trsw_rx_gain = max_rx_gain - trsw_rx_gain;
trsw_rx = 0x20;
@@ -316,38 +319,38 @@ static void lo_measure_gain_values(struct b43_wldev *dev,
} else
trsw_rx_gain = max_rx_gain;
if (trsw_rx_gain < 9) {
- phy->lna_lod_gain = 0;
+ gphy->lna_lod_gain = 0;
} else {
- phy->lna_lod_gain = 1;
+ gphy->lna_lod_gain = 1;
trsw_rx_gain -= 8;
}
trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D);
- phy->pga_gain = trsw_rx_gain / 3;
- if (phy->pga_gain >= 5) {
- phy->pga_gain -= 5;
- phy->lna_gain = 2;
+ gphy->pga_gain = trsw_rx_gain / 3;
+ if (gphy->pga_gain >= 5) {
+ gphy->pga_gain -= 5;
+ gphy->lna_gain = 2;
} else
- phy->lna_gain = 0;
+ gphy->lna_gain = 0;
} else {
- phy->lna_gain = 0;
- phy->trsw_rx_gain = 0x20;
+ gphy->lna_gain = 0;
+ gphy->trsw_rx_gain = 0x20;
if (max_rx_gain >= 0x14) {
- phy->lna_lod_gain = 1;
- phy->pga_gain = 2;
+ gphy->lna_lod_gain = 1;
+ gphy->pga_gain = 2;
} else if (max_rx_gain >= 0x12) {
- phy->lna_lod_gain = 1;
- phy->pga_gain = 1;
+ gphy->lna_lod_gain = 1;
+ gphy->pga_gain = 1;
} else if (max_rx_gain >= 0xF) {
- phy->lna_lod_gain = 1;
- phy->pga_gain = 0;
+ gphy->lna_lod_gain = 1;
+ gphy->pga_gain = 0;
} else {
- phy->lna_lod_gain = 0;
- phy->pga_gain = 0;
+ gphy->lna_lod_gain = 0;
+ gphy->pga_gain = 0;
}
}
tmp = b43_radio_read16(dev, 0x7A);
- if (phy->lna_lod_gain == 0)
+ if (gphy->lna_lod_gain == 0)
tmp &= ~0x0008;
else
tmp |= 0x0008;
@@ -392,10 +395,11 @@ static void lo_measure_setup(struct b43_wldev *dev,
{
struct ssb_sprom *sprom = &dev->dev->bus->sprom;
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
u16 tmp;
- if (b43_has_hardware_pctl(phy)) {
+ if (b43_has_hardware_pctl(dev)) {
sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK);
sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01));
sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL);
@@ -496,7 +500,7 @@ static void lo_measure_setup(struct b43_wldev *dev,
b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802);
if (phy->rev >= 2)
b43_dummy_transmission(dev);
- b43_radio_selectchannel(dev, 6, 0);
+ b43_gphy_channel_switch(dev, 6, 0);
b43_radio_read16(dev, 0x51); /* dummy read */
if (phy->type == B43_PHYTYPE_G)
b43_phy_write(dev, B43_PHY_CCK(0x2F), 0);
@@ -520,18 +524,19 @@ static void lo_measure_restore(struct b43_wldev *dev,
struct lo_g_saved_values *sav)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
u16 tmp;
if (phy->rev >= 2) {
b43_phy_write(dev, B43_PHY_PGACTL, 0xE300);
- tmp = (phy->pga_gain << 8);
+ tmp = (gphy->pga_gain << 8);
b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA0);
udelay(5);
b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA2);
udelay(2);
b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA3);
} else {
- tmp = (phy->pga_gain | 0xEFA0);
+ tmp = (gphy->pga_gain | 0xEFA0);
b43_phy_write(dev, B43_PHY_PGACTL, tmp);
}
if (phy->type == B43_PHYTYPE_G) {
@@ -572,7 +577,7 @@ static void lo_measure_restore(struct b43_wldev *dev,
b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E);
b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0);
}
- if (b43_has_hardware_pctl(phy)) {
+ if (b43_has_hardware_pctl(dev)) {
tmp = (sav->phy_lo_mask & 0xBFFF);
b43_phy_write(dev, B43_PHY_LO_MASK, tmp);
b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01);
@@ -580,7 +585,7 @@ static void lo_measure_restore(struct b43_wldev *dev,
b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14);
b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl);
}
- b43_radio_selectchannel(dev, sav->old_channel, 1);
+ b43_gphy_channel_switch(dev, sav->old_channel, 1);
}
struct b43_lo_g_statemachine {
@@ -597,6 +602,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev,
struct b43_lo_g_statemachine *d)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
struct b43_loctl test_loctl;
struct b43_loctl orig_loctl;
struct b43_loctl prev_loctl = {
@@ -646,9 +652,9 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev,
test_loctl.q != prev_loctl.q) &&
(abs(test_loctl.i) <= 16 && abs(test_loctl.q) <= 16)) {
b43_lo_write(dev, &test_loctl);
- feedth = lo_measure_feedthrough(dev, phy->lna_gain,
- phy->pga_gain,
- phy->trsw_rx_gain);
+ feedth = lo_measure_feedthrough(dev, gphy->lna_gain,
+ gphy->pga_gain,
+ gphy->trsw_rx_gain);
if (feedth < d->lowest_feedth) {
memcpy(probe_loctl, &test_loctl,
sizeof(struct b43_loctl));
@@ -677,6 +683,7 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
int *max_rx_gain)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
struct b43_lo_g_statemachine d;
u16 feedth;
int found_lower;
@@ -693,17 +700,17 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
max_repeat = 4;
do {
b43_lo_write(dev, &d.min_loctl);
- feedth = lo_measure_feedthrough(dev, phy->lna_gain,
- phy->pga_gain,
- phy->trsw_rx_gain);
+ feedth = lo_measure_feedthrough(dev, gphy->lna_gain,
+ gphy->pga_gain,
+ gphy->trsw_rx_gain);
if (feedth < 0x258) {
if (feedth >= 0x12C)
*max_rx_gain += 6;
else
*max_rx_gain += 3;
- feedth = lo_measure_feedthrough(dev, phy->lna_gain,
- phy->pga_gain,
- phy->trsw_rx_gain);
+ feedth = lo_measure_feedthrough(dev, gphy->lna_gain,
+ gphy->pga_gain,
+ gphy->trsw_rx_gain);
}
d.lowest_feedth = feedth;
@@ -752,6 +759,7 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
const struct b43_rfatt *rfatt)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
struct b43_loctl loctl = {
.i = 0,
.q = 0,
@@ -782,11 +790,11 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
if (rfatt->with_padmix)
max_rx_gain -= pad_mix_gain;
if (has_loopback_gain(phy))
- max_rx_gain += phy->max_lb_gain;
+ max_rx_gain += gphy->max_lb_gain;
lo_measure_gain_values(dev, max_rx_gain,
has_loopback_gain(phy));
- b43_phy_set_baseband_attenuation(dev, bbatt->att);
+ b43_gphy_set_baseband_attenuation(dev, bbatt->att);
lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
lo_measure_restore(dev, &saved_regs);
@@ -820,7 +828,7 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
const struct b43_bbatt *bbatt,
const struct b43_rfatt *rfatt)
{
- struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_txpower_lo_control *lo = dev->phy.g->lo_control;
struct b43_lo_calib *c;
c = b43_find_lo_calib(lo, bbatt, rfatt);
@@ -839,7 +847,8 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
int i;
int rf_offset, bb_offset;
const struct b43_rfatt *rfatt;
@@ -917,14 +926,14 @@ static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf)
void b43_lo_g_adjust(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
struct b43_lo_calib *cal;
struct b43_rfatt rf;
- memcpy(&rf, &phy->rfatt, sizeof(rf));
+ memcpy(&rf, &gphy->rfatt, sizeof(rf));
b43_lo_fixup_rfatt(&rf);
- cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf);
+ cal = b43_get_calib_lo_settings(dev, &gphy->bbatt, &rf);
if (!cal)
return;
b43_lo_write(dev, &cal->ctl);
@@ -952,7 +961,8 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev,
void b43_lo_g_maintanance_work(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
unsigned long now;
unsigned long expire;
struct b43_lo_calib *cal, *tmp;
@@ -962,7 +972,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
if (!lo)
return;
now = jiffies;
- hwpctl = b43_has_hardware_pctl(phy);
+ hwpctl = b43_has_hardware_pctl(dev);
if (hwpctl) {
/* Read the power vector and update it, if needed. */
@@ -983,8 +993,8 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
if (!time_before(cal->calib_time, expire))
continue;
/* This item expired. */
- if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) &&
- b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) {
+ if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) &&
+ b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) {
B43_WARN_ON(current_item_expired);
current_item_expired = 1;
}
@@ -1002,7 +1012,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
/* Recalibrate currently used LO setting. */
if (b43_debug(dev, B43_DBG_LO))
b43dbg(dev->wl, "LO: Recalibrating current LO setting\n");
- cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt);
+ cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt);
if (cal) {
list_add(&cal->list, &lo->calib_list);
b43_lo_write(dev, &cal->ctl);
@@ -1013,7 +1023,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev)
void b43_lo_g_cleanup(struct b43_wldev *dev)
{
- struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_txpower_lo_control *lo = dev->phy.g->lo_control;
struct b43_lo_calib *cal, *tmp;
if (!lo)
@@ -1027,9 +1037,7 @@ void b43_lo_g_cleanup(struct b43_wldev *dev)
/* LO Initialization */
void b43_lo_g_init(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
-
- if (b43_has_hardware_pctl(phy)) {
+ if (b43_has_hardware_pctl(dev)) {
lo_read_power_vector(dev);
b43_gphy_dc_lt_init(dev, 1);
}
diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h
index 1da321cabc1..3b27e20eff8 100644
--- a/drivers/net/wireless/b43/lo.h
+++ b/drivers/net/wireless/b43/lo.h
@@ -1,7 +1,9 @@
#ifndef B43_LO_H_
#define B43_LO_H_
-#include "phy.h"
+/* G-PHY Local Oscillator */
+
+#include "phy_g.h"
struct b43_wldev;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7205a936ec7..14c44df584d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -44,8 +44,9 @@
#include "b43.h"
#include "main.h"
#include "debugfs.h"
-#include "phy.h"
-#include "nphy.h"
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_n.h"
#include "dma.h"
#include "pio.h"
#include "sysfs.h"
@@ -814,7 +815,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
break;
udelay(10);
}
- for (i = 0x00; i < 0x0A; i++) {
+ for (i = 0x00; i < 0x19; i++) {
value = b43_read16(dev, 0x0690);
if (!(value & 0x0100))
break;
@@ -1051,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
}
}
-/* Turn the Analog ON/OFF */
-static void b43_switch_analog(struct b43_wldev *dev, int on)
-{
- switch (dev->phy.type) {
- case B43_PHYTYPE_A:
- case B43_PHYTYPE_G:
- b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
- break;
- case B43_PHYTYPE_N:
- b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
- on ? 0 : 0x7FFF);
- break;
- default:
- B43_WARN_ON(1);
- }
-}
-
void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
{
u32 tmslow;
@@ -1090,8 +1074,12 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
- /* Turn Analog ON */
- b43_switch_analog(dev, 1);
+ /* Turn Analog ON, but only if we already know the PHY-type.
+ * This protects against very early setup where we don't know the
+ * PHY-type, yet. wireless_core_reset will be called once again later,
+ * when we know the PHY-type. */
+ if (dev->phy.ops)
+ dev->phy.ops->switch_analog(dev, 1);
macctl = b43_read32(dev, B43_MMIO_MACCTL);
macctl &= ~B43_MACCTL_GMODE;
@@ -1174,6 +1162,8 @@ static void b43_calculate_link_quality(struct b43_wldev *dev)
{
/* Top half of Link Quality calculation. */
+ if (dev->phy.type != B43_PHYTYPE_G)
+ return;
if (dev->noisecalc.calculation_running)
return;
dev->noisecalc.calculation_running = 1;
@@ -1184,7 +1174,7 @@ static void b43_calculate_link_quality(struct b43_wldev *dev)
static void handle_irq_noise(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *phy = dev->phy.g;
u16 tmp;
u8 noise[4];
u8 i, j;
@@ -1192,6 +1182,9 @@ static void handle_irq_noise(struct b43_wldev *dev)
/* Bottom half of Link Quality calculation. */
+ if (dev->phy.type != B43_PHYTYPE_G)
+ return;
+
/* Possible race condition: It might be possible that the user
* changed to a different channel in the meantime since we
* started the calculation. We ignore that fact, since it's
@@ -1251,13 +1244,13 @@ generate_new:
static void handle_irq_tbtt_indication(struct b43_wldev *dev)
{
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
///TODO: PS TBTT
} else {
if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
b43_power_saving_ctl_bits(dev, 0);
}
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
dev->dfq_valid = 1;
}
@@ -1606,8 +1599,8 @@ static void handle_irq_beacon(struct b43_wldev *dev)
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
- if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) &&
- !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
+ !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
return;
/* This is the bottom half of the asynchronous beacon update. */
@@ -2575,10 +2568,10 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
ctl &= ~B43_MACCTL_BEACPROMISC;
ctl |= B43_MACCTL_INFRA;
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
ctl |= B43_MACCTL_AP;
- else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
+ else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
ctl &= ~B43_MACCTL_INFRA;
if (wl->filter_flags & FIF_CONTROL)
@@ -2688,9 +2681,8 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
/* This is the opposite of b43_chip_init() */
static void b43_chip_exit(struct b43_wldev *dev)
{
- b43_radio_turn_off(dev, 1);
+ b43_phy_exit(dev);
b43_gpio_cleanup(dev);
- b43_lo_g_cleanup(dev);
/* firmware is released later */
}
@@ -2700,7 +2692,7 @@ static void b43_chip_exit(struct b43_wldev *dev)
static int b43_chip_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- int err, tmp;
+ int err;
u32 value32, macctl;
u16 value16;
@@ -2725,19 +2717,20 @@ static int b43_chip_init(struct b43_wldev *dev)
err = b43_upload_initvals(dev);
if (err)
goto err_gpio_clean;
- b43_radio_turn_on(dev);
- b43_write16(dev, 0x03E6, 0x0000);
+ /* Turn the Analog on and initialize the PHY. */
+ phy->ops->switch_analog(dev, 1);
err = b43_phy_init(dev);
if (err)
- goto err_radio_off;
+ goto err_gpio_clean;
- /* Select initial Interference Mitigation. */
- tmp = phy->interfmode;
- phy->interfmode = B43_INTERFMODE_NONE;
- b43_radio_set_interference_mitigation(dev, tmp);
+ /* Disable Interference Mitigation. */
+ if (phy->ops->interf_mitigation)
+ phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
- b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
+ /* Select the antennae */
+ if (phy->ops->set_rx_antenna)
+ phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
if (phy->type == B43_PHYTYPE_B) {
@@ -2790,8 +2783,6 @@ static int b43_chip_init(struct b43_wldev *dev)
out:
return err;
-err_radio_off:
- b43_radio_turn_off(dev, 1);
err_gpio_clean:
b43_gpio_cleanup(dev);
return err;
@@ -2799,25 +2790,13 @@ err_gpio_clean:
static void b43_periodic_every60sec(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ const struct b43_phy_operations *ops = dev->phy.ops;
- if (phy->type != B43_PHYTYPE_G)
- return;
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
- b43_mac_suspend(dev);
- b43_calc_nrssi_slope(dev);
- if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
- u8 old_chan = phy->channel;
-
- /* VCO Calibration */
- if (old_chan >= 8)
- b43_radio_selectchannel(dev, 1, 0);
- else
- b43_radio_selectchannel(dev, 13, 0);
- b43_radio_selectchannel(dev, old_chan, 0);
- }
- b43_mac_enable(dev);
- }
+ if (ops->pwork_60sec)
+ ops->pwork_60sec(dev);
+
+ /* Force check the TX power emission now. */
+ b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
}
static void b43_periodic_every30sec(struct b43_wldev *dev)
@@ -2845,32 +2824,8 @@ static void b43_periodic_every15sec(struct b43_wldev *dev)
}
}
- if (phy->type == B43_PHYTYPE_G) {
- //TODO: update_aci_moving_average
- if (phy->aci_enable && phy->aci_wlan_automatic) {
- b43_mac_suspend(dev);
- if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
- if (0 /*TODO: bunch of conditions */ ) {
- b43_radio_set_interference_mitigation
- (dev, B43_INTERFMODE_MANUALWLAN);
- }
- } else if (1 /*TODO*/) {
- /*
- if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
- b43_radio_set_interference_mitigation(dev,
- B43_INTERFMODE_NONE);
- }
- */
- }
- b43_mac_enable(dev);
- } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
- phy->rev == 1) {
- //TODO: implement rev1 workaround
- }
- }
- b43_phy_xmitpower(dev); //FIXME: unless scanning?
- b43_lo_g_maintanance_work(dev);
- //TODO for APHY (temperature?)
+ if (phy->ops->pwork_15sec)
+ phy->ops->pwork_15sec(dev);
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
wmb();
@@ -3104,36 +3059,31 @@ static void b43_qos_params_upload(struct b43_wldev *dev,
}
}
-/* Update the QOS parameters in hardware. */
-static void b43_qos_update(struct b43_wldev *dev)
+/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */
+static const u16 b43_qos_shm_offsets[] = {
+ /* [mac80211-queue-nr] = SHM_OFFSET, */
+ [0] = B43_QOS_VOICE,
+ [1] = B43_QOS_VIDEO,
+ [2] = B43_QOS_BESTEFFORT,
+ [3] = B43_QOS_BACKGROUND,
+};
+
+/* Update all QOS parameters in hardware. */
+static void b43_qos_upload_all(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
struct b43_qos_params *params;
- unsigned long flags;
unsigned int i;
- /* Mapping of mac80211 queues to b43 SHM offsets. */
- static const u16 qos_shm_offsets[] = {
- [0] = B43_QOS_VOICE,
- [1] = B43_QOS_VIDEO,
- [2] = B43_QOS_BESTEFFORT,
- [3] = B43_QOS_BACKGROUND,
- };
- BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params));
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
b43_mac_suspend(dev);
- spin_lock_irqsave(&wl->irq_lock, flags);
-
for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
params = &(wl->qos_params[i]);
- if (params->need_hw_update) {
- b43_qos_params_upload(dev, &(params->p),
- qos_shm_offsets[i]);
- params->need_hw_update = 0;
- }
+ b43_qos_params_upload(dev, &(params->p),
+ b43_qos_shm_offsets[i]);
}
-
- spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_mac_enable(dev);
}
@@ -3142,25 +3092,50 @@ static void b43_qos_clear(struct b43_wl *wl)
struct b43_qos_params *params;
unsigned int i;
+ /* Initialize QoS parameters to sane defaults. */
+
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
+
for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
params = &(wl->qos_params[i]);
- memset(&(params->p), 0, sizeof(params->p));
- params->p.aifs = -1;
- params->need_hw_update = 1;
+ switch (b43_qos_shm_offsets[i]) {
+ case B43_QOS_VOICE:
+ params->p.txop = 0;
+ params->p.aifs = 2;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x0001;
+ break;
+ case B43_QOS_VIDEO:
+ params->p.txop = 0;
+ params->p.aifs = 2;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x0001;
+ break;
+ case B43_QOS_BESTEFFORT:
+ params->p.txop = 0;
+ params->p.aifs = 3;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x03FF;
+ break;
+ case B43_QOS_BACKGROUND:
+ params->p.txop = 0;
+ params->p.aifs = 7;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x03FF;
+ break;
+ default:
+ B43_WARN_ON(1);
+ }
}
}
/* Initialize the core's QOS capabilities */
static void b43_qos_init(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
- unsigned int i;
-
/* Upload the current QOS parameters. */
- for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++)
- wl->qos_params[i].need_hw_update = 1;
- b43_qos_update(dev);
+ b43_qos_upload_all(dev);
/* Enable QOS support. */
b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
@@ -3169,25 +3144,13 @@ static void b43_qos_init(struct b43_wldev *dev)
| B43_MMIO_IFSCTL_USE_EDCF);
}
-static void b43_qos_update_work(struct work_struct *work)
-{
- struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work);
- struct b43_wldev *dev;
-
- mutex_lock(&wl->mutex);
- dev = wl->current_dev;
- if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED)))
- b43_qos_update(dev);
- mutex_unlock(&wl->mutex);
-}
-
static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
const struct ieee80211_tx_queue_params *params)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- unsigned long flags;
+ struct b43_wldev *dev;
unsigned int queue = (unsigned int)_queue;
- struct b43_qos_params *p;
+ int err = -ENODEV;
if (queue >= ARRAY_SIZE(wl->qos_params)) {
/* Queue not available or don't support setting
@@ -3195,16 +3158,25 @@ static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
* confuse mac80211. */
return 0;
}
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
- spin_lock_irqsave(&wl->irq_lock, flags);
- p = &(wl->qos_params[queue]);
- memcpy(&(p->p), params, sizeof(p->p));
- p->need_hw_update = 1;
- spin_unlock_irqrestore(&wl->irq_lock, flags);
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED)))
+ goto out_unlock;
- queue_work(hw->workqueue, &wl->qos_update_work);
+ memcpy(&(wl->qos_params[queue].p), params, sizeof(*params));
+ b43_mac_suspend(dev);
+ b43_qos_params_upload(dev, &(wl->qos_params[queue].p),
+ b43_qos_shm_offsets[queue]);
+ b43_mac_enable(dev);
+ err = 0;
- return 0;
+out_unlock:
+ mutex_unlock(&wl->mutex);
+
+ return err;
}
static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
@@ -3401,7 +3373,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
/* Switch to the requested channel.
* The firmware takes care of races with the TX handler. */
if (conf->channel->hw_value != phy->channel)
- b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
+ b43_switch_channel(dev, conf->channel->hw_value);
/* Enable/Disable ShortSlot timing. */
if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
@@ -3417,26 +3389,30 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
/* Adjust the desired TX power level. */
if (conf->power_level != 0) {
- if (conf->power_level != phy->power_level) {
- phy->power_level = conf->power_level;
- b43_phy_xmitpower(dev);
+ spin_lock_irqsave(&wl->irq_lock, flags);
+ if (conf->power_level != phy->desired_txpower) {
+ phy->desired_txpower = conf->power_level;
+ b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
+ B43_TXPWR_IGNORE_TSSI);
}
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
}
/* Antennas for RX and management frame TX. */
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
b43_mgmtframe_txantenna(dev, antenna);
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
- b43_set_rx_antenna(dev, antenna);
+ if (phy->ops->set_rx_antenna)
+ phy->ops->set_rx_antenna(dev, antenna);
/* Update templates for AP/mesh mode. */
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
- b43_radio_turn_on(dev);
+ b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
b43info(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable) {
b43info(dev->wl, "The hardware RF-kill button "
@@ -3444,7 +3420,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
"Press the button to turn it on.\n");
}
} else {
- b43_radio_turn_off(dev, 0);
+ b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
b43info(dev->wl, "Radio turned off by software\n");
}
}
@@ -3619,14 +3595,14 @@ static int b43_op_config_interface(struct ieee80211_hw *hw,
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) {
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
B43_WARN_ON(vif->type != wl->if_type);
if (conf->changed & IEEE80211_IFCC_SSID)
b43_set_ssid(dev, conf->ssid, conf->ssid_len);
if (conf->changed & IEEE80211_IFCC_BEACON)
b43_update_templates(wl);
- } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) {
+ } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
if (conf->changed & IEEE80211_IFCC_BEACON)
b43_update_templates(wl);
}
@@ -3818,48 +3794,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
static void setup_struct_phy_for_init(struct b43_wldev *dev,
struct b43_phy *phy)
{
- struct b43_txpower_lo_control *lo;
- int i;
-
- memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
- memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
-
- phy->aci_enable = 0;
- phy->aci_wlan_automatic = 0;
- phy->aci_hw_rssi = 0;
-
- phy->radio_off_context.valid = 0;
-
- lo = phy->lo_control;
- if (lo) {
- memset(lo, 0, sizeof(*(phy->lo_control)));
- lo->tx_bias = 0xFF;
- INIT_LIST_HEAD(&lo->calib_list);
- }
- phy->max_lb_gain = 0;
- phy->trsw_rx_gain = 0;
- phy->txpwr_offset = 0;
-
- /* NRSSI */
- phy->nrssislope = 0;
- for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
- phy->nrssi[i] = -1000;
- for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
- phy->nrssi_lt[i] = i;
-
- phy->lofcal = 0xFFFF;
- phy->initval = 0xFFFF;
-
- phy->interfmode = B43_INTERFMODE_NONE;
- phy->channel = 0xFF;
-
phy->hardware_power_control = !!modparam_hwpctl;
-
+ phy->next_txpwr_check_time = jiffies;
/* PHY TX errors counter. */
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
-
- /* OFDM-table address caching. */
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
}
static void setup_struct_wldev_for_init(struct b43_wldev *dev)
@@ -3965,7 +3903,7 @@ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
pu_delay = 3700;
else
pu_delay = 1050;
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
pu_delay = 500;
if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
pu_delay = max(pu_delay, (u16)2400);
@@ -3979,7 +3917,7 @@ static void b43_set_pretbtt(struct b43_wldev *dev)
u16 pretbtt;
/* The time value is in microseconds. */
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
pretbtt = 2;
} else {
if (dev->phy.type == B43_PHYTYPE_A)
@@ -3995,7 +3933,6 @@ static void b43_set_pretbtt(struct b43_wldev *dev)
/* Locking: wl->mutex */
static void b43_wireless_core_exit(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
u32 macctl;
B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
@@ -4016,12 +3953,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
- b43_radio_turn_off(dev, 1);
- b43_switch_analog(dev, 0);
- if (phy->dyn_tssi_tbl)
- kfree(phy->tssi2dbm);
- kfree(phy->lo_control);
- phy->lo_control = NULL;
+ dev->phy.ops->switch_analog(dev, 0);
if (dev->wl->current_beacon) {
dev_kfree_skb_any(dev->wl->current_beacon);
dev->wl->current_beacon = NULL;
@@ -4052,29 +3984,23 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
b43_wireless_core_reset(dev, tmp);
}
- if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
- phy->lo_control =
- kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
- if (!phy->lo_control) {
- err = -ENOMEM;
- goto err_busdown;
- }
- }
+ /* Reset all data structures. */
setup_struct_wldev_for_init(dev);
-
- err = b43_phy_init_tssi2dbm_table(dev);
- if (err)
- goto err_kfree_lo_control;
+ phy->ops->prepare_structs(dev);
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
b43_imcfglo_timeouts_workaround(dev);
b43_bluetooth_coext_disable(dev);
- b43_phy_early_init(dev);
+ if (phy->ops->prepare_hardware) {
+ err = phy->ops->prepare_hardware(dev);
+ if (err)
+ goto err_busdown;
+ }
err = b43_chip_init(dev);
if (err)
- goto err_kfree_tssitbl;
+ goto err_busdown;
b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
hf = b43_hf_read(dev);
@@ -4140,15 +4066,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
out:
return err;
- err_chip_exit:
+err_chip_exit:
b43_chip_exit(dev);
- err_kfree_tssitbl:
- if (phy->dyn_tssi_tbl)
- kfree(phy->tssi2dbm);
- err_kfree_lo_control:
- kfree(phy->lo_control);
- phy->lo_control = NULL;
- err_busdown:
+err_busdown:
ssb_bus_may_powerdown(bus);
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
return err;
@@ -4164,11 +4084,11 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != IEEE80211_IF_TYPE_AP &&
- conf->type != IEEE80211_IF_TYPE_MESH_POINT &&
- conf->type != IEEE80211_IF_TYPE_STA &&
- conf->type != IEEE80211_IF_TYPE_WDS &&
- conf->type != IEEE80211_IF_TYPE_IBSS)
+ if (conf->type != NL80211_IFTYPE_AP &&
+ conf->type != NL80211_IFTYPE_MESH_POINT &&
+ conf->type != NL80211_IFTYPE_STATION &&
+ conf->type != NL80211_IFTYPE_WDS &&
+ conf->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
@@ -4283,7 +4203,6 @@ static void b43_op_stop(struct ieee80211_hw *hw)
struct b43_wldev *dev = wl->current_dev;
b43_rfkill_exit(dev);
- cancel_work_sync(&(wl->qos_update_work));
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
@@ -4291,6 +4210,8 @@ static void b43_op_stop(struct ieee80211_hw *hw)
b43_wireless_core_stop(dev);
b43_wireless_core_exit(dev);
mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&(wl->txpower_adjust_work));
}
static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
@@ -4313,7 +4234,8 @@ out_unlock:
return err;
}
-static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
+static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, bool set)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
unsigned long flags;
@@ -4328,7 +4250,7 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
static void b43_op_sta_notify(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum sta_notify_cmd notify_cmd,
- const u8 *addr)
+ struct ieee80211_sta *sta)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
@@ -4422,6 +4344,7 @@ static void b43_wireless_core_detach(struct b43_wldev *dev)
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43_release_firmware(dev);
+ b43_phy_free(dev);
}
static int b43_wireless_core_attach(struct b43_wldev *dev)
@@ -4495,30 +4418,35 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
}
}
+ err = b43_phy_allocate(dev);
+ if (err)
+ goto err_powerdown;
+
dev->phy.gmode = have_2ghz_phy;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
err = b43_validate_chipaccess(dev);
if (err)
- goto err_powerdown;
+ goto err_phy_free;
err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
if (err)
- goto err_powerdown;
+ goto err_phy_free;
/* Now set some default "current_dev" */
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43_chip_reset);
- b43_radio_turn_off(dev, 1);
- b43_switch_analog(dev, 0);
+ dev->phy.ops->switch_analog(dev, 0);
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(bus);
out:
return err;
+err_phy_free:
+ b43_phy_free(dev);
err_powerdown:
ssb_bus_may_powerdown(bus);
return err;
@@ -4615,9 +4543,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
pdev = bus->host_pci;
if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
- IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
+ IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
}
}
@@ -4650,7 +4580,15 @@ static int b43_wireless_init(struct ssb_device *dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
hw->queues = b43_modparam_qos ? 4 : 1;
+ hw->max_altrates = 1;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
@@ -4667,8 +4605,8 @@ static int b43_wireless_init(struct ssb_device *dev)
spin_lock_init(&wl->shm_lock);
mutex_init(&wl->mutex);
INIT_LIST_HEAD(&wl->devlist);
- INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
+ INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
ssb_set_devtypedata(dev, wl);
b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
diff --git a/drivers/net/wireless/b43/phy.h b/drivers/net/wireless/b43/phy.h
deleted file mode 100644
index 4aab1090352..00000000000
--- a/drivers/net/wireless/b43/phy.h
+++ /dev/null
@@ -1,340 +0,0 @@
-#ifndef B43_PHY_H_
-#define B43_PHY_H_
-
-#include <linux/types.h>
-
-struct b43_wldev;
-struct b43_phy;
-
-/*** PHY Registers ***/
-
-/* Routing */
-#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
-#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
-#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
-#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
-#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */
-
-/* CCK (B-PHY) registers. */
-#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE)
-/* N-PHY registers. */
-#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE)
-/* N-PHY BMODE registers. */
-#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE)
-/* OFDM (A-PHY) registers. */
-#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
-/* Extended G-PHY registers. */
-#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY)
-
-/* OFDM (A) PHY Registers */
-#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */
-#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */
-#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */
-#define B43_PHY_BBANDCFG_RXANT_SHIFT 7
-#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */
-#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */
-#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */
-#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */
-#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */
-#define B43_PHY_CRS0 B43_PHY_OFDM(0x29)
-#define B43_PHY_CRS0_EN 0x4000
-#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30)
-#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */
-#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */
-#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */
-#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */
-#define B43_PHY_LMS B43_PHY_OFDM(0x55)
-#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */
-#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */
-#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */
-#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */
-#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */
-#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */
-#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */
-#define B43_PHY_OTABLENR_SHIFT 10
-#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */
-#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */
-#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */
-#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */
-#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B)
-#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */
-#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */
-#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */
-#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */
-#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */
-#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */
-#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0)
-#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1)
-#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2)
-#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3)
-#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4)
-#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */
-#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */
-#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */
-#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9)
-#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA)
-#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB)
-#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */
-#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */
-#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */
-#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */
-#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */
-#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */
-#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */
-
-/* CCK (B) PHY Registers */
-#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */
-#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */
-#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */
-#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */
-#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */
-#define B43_PHY_PGACTL_UNKNOWN 0xEFA0
-#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */
-#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */
-#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */
-#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */
-#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35)
-#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */
-#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */
-#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */
-
-/* Extended G-PHY Registers */
-#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */
-#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */
-#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */
-#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */
-#define B43_PHY_GTABNR_SHIFT 10
-#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */
-#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */
-#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */
-#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */
-#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */
-#define B43_PHY_RFOVERVAL_EXTLNA 0x8000
-#define B43_PHY_RFOVERVAL_LNA 0x7000
-#define B43_PHY_RFOVERVAL_LNA_SHIFT 12
-#define B43_PHY_RFOVERVAL_PGA 0x0F00
-#define B43_PHY_RFOVERVAL_PGA_SHIFT 8
-#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */
-#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0
-#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */
-#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */
-#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */
-#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */
-#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */
-
-/*** OFDM table numbers ***/
-#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
-#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0)
-#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0)
-#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename
-#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4)
-#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0)
-#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3)
-#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0)
-#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0)
-#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0)
-#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0)
-#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0)
-#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0)
-#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0)
-#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0)
-#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7)
-#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12)
-#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13)
-#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename
-#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename
-#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12)
-#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0)
-#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename
-#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0)
-#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove!
-#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0)
-#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0)
-#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4)
-#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0)
-#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0)
-#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0)
-#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0)
-
-u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset);
-void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
- u16 offset, u16 value);
-u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
-void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
- u16 offset, u32 value);
-
-/*** G-PHY table numbers */
-#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset))
-#define B43_GTAB_NRSSI B43_GTAB(0x00, 0)
-#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120)
-#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298)
-
-u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); //TODO implement
-void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); //TODO implement
-
-#define B43_DEFAULT_CHANNEL_A 36
-#define B43_DEFAULT_CHANNEL_BG 6
-
-enum {
- B43_ANTENNA0, /* Antenna 0 */
- B43_ANTENNA1, /* Antenna 0 */
- B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */
- B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */
- B43_ANTENNA2,
- B43_ANTENNA3 = 8,
-
- B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
- B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO,
-};
-
-enum {
- B43_INTERFMODE_NONE,
- B43_INTERFMODE_NONWLAN,
- B43_INTERFMODE_MANUALWLAN,
- B43_INTERFMODE_AUTOWLAN,
-};
-
-/* Masks for the different PHY versioning registers. */
-#define B43_PHYVER_ANALOG 0xF000
-#define B43_PHYVER_ANALOG_SHIFT 12
-#define B43_PHYVER_TYPE 0x0F00
-#define B43_PHYVER_TYPE_SHIFT 8
-#define B43_PHYVER_VERSION 0x00FF
-
-void b43_phy_lock(struct b43_wldev *dev);
-void b43_phy_unlock(struct b43_wldev *dev);
-
-
-/* Read a value from a PHY register */
-u16 b43_phy_read(struct b43_wldev *dev, u16 offset);
-/* Write a value to a PHY register */
-void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val);
-/* Mask a PHY register with a mask */
-void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask);
-/* OR a PHY register with a bitmap */
-void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set);
-/* Mask and OR a PHY register with a mask and bitmap */
-void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
-
-
-int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev);
-
-void b43_phy_early_init(struct b43_wldev *dev);
-int b43_phy_init(struct b43_wldev *dev);
-
-void b43_set_rx_antenna(struct b43_wldev *dev, int antenna);
-
-void b43_phy_xmitpower(struct b43_wldev *dev);
-
-/* Returns the boolean whether the board has HardwarePowerControl */
-bool b43_has_hardware_pctl(struct b43_phy *phy);
-/* Returns the boolean whether "TX Magnification" is enabled. */
-#define has_tx_magnification(phy) \
- (((phy)->rev >= 2) && \
- ((phy)->radio_ver == 0x2050) && \
- ((phy)->radio_rev == 8))
-/* Card uses the loopback gain stuff */
-#define has_loopback_gain(phy) \
- (((phy)->rev > 1) || ((phy)->gmode))
-
-/* Radio Attenuation (RF Attenuation) */
-struct b43_rfatt {
- u8 att; /* Attenuation value */
- bool with_padmix; /* Flag, PAD Mixer enabled. */
-};
-struct b43_rfatt_list {
- /* Attenuation values list */
- const struct b43_rfatt *list;
- u8 len;
- /* Minimum/Maximum attenuation values */
- u8 min_val;
- u8 max_val;
-};
-
-/* Returns true, if the values are the same. */
-static inline bool b43_compare_rfatt(const struct b43_rfatt *a,
- const struct b43_rfatt *b)
-{
- return ((a->att == b->att) &&
- (a->with_padmix == b->with_padmix));
-}
-
-/* Baseband Attenuation */
-struct b43_bbatt {
- u8 att; /* Attenuation value */
-};
-struct b43_bbatt_list {
- /* Attenuation values list */
- const struct b43_bbatt *list;
- u8 len;
- /* Minimum/Maximum attenuation values */
- u8 min_val;
- u8 max_val;
-};
-
-/* Returns true, if the values are the same. */
-static inline bool b43_compare_bbatt(const struct b43_bbatt *a,
- const struct b43_bbatt *b)
-{
- return (a->att == b->att);
-}
-
-/* tx_control bits. */
-#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */
-#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */
-#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */
-
-/* Write BasebandAttenuation value to the device. */
-void b43_phy_set_baseband_attenuation(struct b43_wldev *dev,
- u16 baseband_attenuation);
-
-extern const u8 b43_radio_channel_codes_bg[];
-
-void b43_radio_lock(struct b43_wldev *dev);
-void b43_radio_unlock(struct b43_wldev *dev);
-
-
-/* Read a value from a 16bit radio register */
-u16 b43_radio_read16(struct b43_wldev *dev, u16 offset);
-/* Write a value to a 16bit radio register */
-void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val);
-/* Mask a 16bit radio register with a mask */
-void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask);
-/* OR a 16bit radio register with a bitmap */
-void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set);
-/* Mask and OR a PHY register with a mask and bitmap */
-void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
-
-
-u16 b43_radio_init2050(struct b43_wldev *dev);
-void b43_radio_init2060(struct b43_wldev *dev);
-
-void b43_radio_turn_on(struct b43_wldev *dev);
-void b43_radio_turn_off(struct b43_wldev *dev, bool force);
-
-int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel,
- int synthetic_pu_workaround);
-
-u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel);
-u8 b43_radio_aci_scan(struct b43_wldev *dev);
-
-int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode);
-
-void b43_calc_nrssi_slope(struct b43_wldev *dev);
-void b43_calc_nrssi_threshold(struct b43_wldev *dev);
-s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset);
-void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val);
-void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val);
-void b43_nrssi_mem_update(struct b43_wldev *dev);
-
-void b43_radio_set_tx_iq(struct b43_wldev *dev);
-u16 b43_radio_calibrationvalue(struct b43_wldev *dev);
-
-void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
- int *_bbatt, int *_rfatt);
-
-void b43_set_txpower_g(struct b43_wldev *dev,
- const struct b43_bbatt *bbatt,
- const struct b43_rfatt *rfatt, u8 tx_control);
-
-#endif /* B43_PHY_H_ */
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
new file mode 100644
index 00000000000..0f1a84c9de6
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -0,0 +1,643 @@
+/*
+
+ Broadcom B43 wireless driver
+ IEEE 802.11a PHY driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+ Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de>
+ Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
+ Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "b43.h"
+#include "phy_a.h"
+#include "phy_common.h"
+#include "wa.h"
+#include "tables.h"
+#include "main.h"
+
+
+/* Get the freq, as it has to be written to the device. */
+static inline u16 channel2freq_a(u8 channel)
+{
+ B43_WARN_ON(channel > 200);
+
+ return (5000 + 5 * channel);
+}
+
+static inline u16 freq_r3A_value(u16 frequency)
+{
+ u16 value;
+
+ if (frequency < 5091)
+ value = 0x0040;
+ else if (frequency < 5321)
+ value = 0x0000;
+ else if (frequency < 5806)
+ value = 0x0080;
+ else
+ value = 0x0040;
+
+ return value;
+}
+
+#if 0
+/* This function converts a TSSI value to dBm in Q5.2 */
+static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_a *aphy = phy->a;
+ s8 dbm = 0;
+ s32 tmp;
+
+ tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi);
+ tmp += 0x80;
+ tmp = clamp_val(tmp, 0x00, 0xFF);
+ dbm = aphy->tssi2dbm[tmp];
+ //TODO: There's a FIXME on the specs
+
+ return dbm;
+}
+#endif
+
+void b43_radio_set_tx_iq(struct b43_wldev *dev)
+{
+ static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
+ static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A };
+ u16 tmp = b43_radio_read16(dev, 0x001E);
+ int i, j;
+
+ for (i = 0; i < 5; i++) {
+ for (j = 0; j < 5; j++) {
+ if (tmp == (data_high[i] << 4 | data_low[j])) {
+ b43_phy_write(dev, 0x0069,
+ (i - j) << 8 | 0x00C0);
+ return;
+ }
+ }
+ }
+}
+
+static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
+{
+ u16 freq, r8, tmp;
+
+ freq = channel2freq_a(channel);
+
+ r8 = b43_radio_read16(dev, 0x0008);
+ b43_write16(dev, 0x03F0, freq);
+ b43_radio_write16(dev, 0x0008, r8);
+
+ //TODO: write max channel TX power? to Radio 0x2D
+ tmp = b43_radio_read16(dev, 0x002E);
+ tmp &= 0x0080;
+ //TODO: OR tmp with the Power out estimation for this channel?
+ b43_radio_write16(dev, 0x002E, tmp);
+
+ if (freq >= 4920 && freq <= 5500) {
+ /*
+ * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F;
+ * = (freq * 0.025862069
+ */
+ r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */
+ }
+ b43_radio_write16(dev, 0x0007, (r8 << 4) | r8);
+ b43_radio_write16(dev, 0x0020, (r8 << 4) | r8);
+ b43_radio_write16(dev, 0x0021, (r8 << 4) | r8);
+ b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022)
+ & 0x000F) | (r8 << 4));
+ b43_radio_write16(dev, 0x002A, (r8 << 4));
+ b43_radio_write16(dev, 0x002B, (r8 << 4));
+ b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008)
+ & 0x00F0) | (r8 << 4));
+ b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029)
+ & 0xFF0F) | 0x00B0);
+ b43_radio_write16(dev, 0x0035, 0x00AA);
+ b43_radio_write16(dev, 0x0036, 0x0085);
+ b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A)
+ & 0xFF20) |
+ freq_r3A_value(freq));
+ b43_radio_write16(dev, 0x003D,
+ b43_radio_read16(dev, 0x003D) & 0x00FF);
+ b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081)
+ & 0xFF7F) | 0x0080);
+ b43_radio_write16(dev, 0x0035,
+ b43_radio_read16(dev, 0x0035) & 0xFFEF);
+ b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035)
+ & 0xFFEF) | 0x0010);
+ b43_radio_set_tx_iq(dev);
+ //TODO: TSSI2dbm workaround
+//FIXME b43_phy_xmitpower(dev);
+}
+
+void b43_radio_init2060(struct b43_wldev *dev)
+{
+ b43_radio_write16(dev, 0x0004, 0x00C0);
+ b43_radio_write16(dev, 0x0005, 0x0008);
+ b43_radio_write16(dev, 0x0009, 0x0040);
+ b43_radio_write16(dev, 0x0005, 0x00AA);
+ b43_radio_write16(dev, 0x0032, 0x008F);
+ b43_radio_write16(dev, 0x0006, 0x008F);
+ b43_radio_write16(dev, 0x0034, 0x008F);
+ b43_radio_write16(dev, 0x002C, 0x0007);
+ b43_radio_write16(dev, 0x0082, 0x0080);
+ b43_radio_write16(dev, 0x0080, 0x0000);
+ b43_radio_write16(dev, 0x003F, 0x00DA);
+ b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008);
+ b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010);
+ b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020);
+ b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020);
+ msleep(1); /* delay 400usec */
+
+ b43_radio_write16(dev, 0x0081,
+ (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010);
+ msleep(1); /* delay 400usec */
+
+ b43_radio_write16(dev, 0x0005,
+ (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008);
+ b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010);
+ b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008);
+ b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040);
+ b43_radio_write16(dev, 0x0081,
+ (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040);
+ b43_radio_write16(dev, 0x0005,
+ (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008);
+ b43_phy_write(dev, 0x0063, 0xDDC6);
+ b43_phy_write(dev, 0x0069, 0x07BE);
+ b43_phy_write(dev, 0x006A, 0x0000);
+
+ aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev));
+
+ msleep(1);
+}
+
+static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable)
+{
+ int i;
+
+ if (dev->phy.rev < 3) {
+ if (enable)
+ for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8);
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_WRSSI, i, 0xFFF8);
+ }
+ else
+ for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]);
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]);
+ }
+ } else {
+ if (enable)
+ for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++)
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_WRSSI, i, 0x0820);
+ else
+ for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++)
+ b43_ofdmtab_write16(dev,
+ B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]);
+ }
+}
+
+static void b43_phy_ww(struct b43_wldev *dev)
+{
+ u16 b, curr_s, best_s = 0xFFFF;
+ int i;
+
+ b43_phy_write(dev, B43_PHY_CRS0,
+ b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN);
+ b43_phy_write(dev, B43_PHY_OFDM(0x1B),
+ b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000);
+ b43_phy_write(dev, B43_PHY_OFDM(0x82),
+ (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300);
+ b43_radio_write16(dev, 0x0009,
+ b43_radio_read16(dev, 0x0009) | 0x0080);
+ b43_radio_write16(dev, 0x0012,
+ (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002);
+ b43_wa_initgains(dev);
+ b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5);
+ b = b43_phy_read(dev, B43_PHY_PWRDOWN);
+ b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005);
+ b43_radio_write16(dev, 0x0004,
+ b43_radio_read16(dev, 0x0004) | 0x0004);
+ for (i = 0x10; i <= 0x20; i++) {
+ b43_radio_write16(dev, 0x0013, i);
+ curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF;
+ if (!curr_s) {
+ best_s = 0x0000;
+ break;
+ } else if (curr_s >= 0x0080)
+ curr_s = 0x0100 - curr_s;
+ if (curr_s < best_s)
+ best_s = curr_s;
+ }
+ b43_phy_write(dev, B43_PHY_PWRDOWN, b);
+ b43_radio_write16(dev, 0x0004,
+ b43_radio_read16(dev, 0x0004) & 0xFFFB);
+ b43_radio_write16(dev, 0x0013, best_s);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC);
+ b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80);
+ b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00);
+ b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0);
+ b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0);
+ b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF);
+ b43_phy_write(dev, B43_PHY_OFDM(0xBB),
+ (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053);
+ b43_phy_write(dev, B43_PHY_OFDM61,
+ (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120);
+ b43_phy_write(dev, B43_PHY_OFDM(0x13),
+ (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000);
+ b43_phy_write(dev, B43_PHY_OFDM(0x14),
+ (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017);
+ for (i = 0; i < 6; i++)
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013);
+ b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030);
+ b43_phy_write(dev, B43_PHY_CRS0,
+ b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN);
+}
+
+static void hardware_pctl_init_aphy(struct b43_wldev *dev)
+{
+ //TODO
+}
+
+void b43_phy_inita(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct b43_phy *phy = &dev->phy;
+
+ /* This lowlevel A-PHY init is also called from G-PHY init.
+ * So we must not access phy->a, if called from G-PHY code.
+ */
+ B43_WARN_ON((phy->type != B43_PHYTYPE_A) &&
+ (phy->type != B43_PHYTYPE_G));
+
+ might_sleep();
+
+ if (phy->rev >= 6) {
+ if (phy->type == B43_PHYTYPE_A)
+ b43_phy_write(dev, B43_PHY_OFDM(0x1B),
+ b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000);
+ if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN)
+ b43_phy_write(dev, B43_PHY_ENCORE,
+ b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010);
+ else
+ b43_phy_write(dev, B43_PHY_ENCORE,
+ b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010);
+ }
+
+ b43_wa_all(dev);
+
+ if (phy->type == B43_PHYTYPE_A) {
+ if (phy->gmode && (phy->rev < 3))
+ b43_phy_write(dev, 0x0034,
+ b43_phy_read(dev, 0x0034) | 0x0001);
+ b43_phy_rssiagc(dev, 0);
+
+ b43_phy_write(dev, B43_PHY_CRS0,
+ b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN);
+
+ b43_radio_init2060(dev);
+
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ ((bus->boardinfo.type == SSB_BOARD_BU4306) ||
+ (bus->boardinfo.type == SSB_BOARD_BU4309))) {
+ ; //TODO: A PHY LO
+ }
+
+ if (phy->rev >= 3)
+ b43_phy_ww(dev);
+
+ hardware_pctl_init_aphy(dev);
+
+ //TODO: radar detection
+ }
+
+ if ((phy->type == B43_PHYTYPE_G) &&
+ (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
+ b43_phy_write(dev, B43_PHY_OFDM(0x6E),
+ (b43_phy_read(dev, B43_PHY_OFDM(0x6E))
+ & 0xE000) | 0x3CF);
+ }
+}
+
+/* Initialise the TSSI->dBm lookup table */
+static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_a *aphy = phy->a;
+ s16 pab0, pab1, pab2;
+
+ pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
+ pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
+ pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
+
+ if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
+ pab0 != -1 && pab1 != -1 && pab2 != -1) {
+ /* The pabX values are set in SPROM. Use them. */
+ if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
+ (s8) dev->dev->bus->sprom.itssi_a != -1)
+ aphy->tgt_idle_tssi =
+ (s8) (dev->dev->bus->sprom.itssi_a);
+ else
+ aphy->tgt_idle_tssi = 62;
+ aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
+ pab1, pab2);
+ if (!aphy->tssi2dbm)
+ return -ENOMEM;
+ } else {
+ /* pabX values not set in SPROM,
+ * but APHY needs a generated table. */
+ aphy->tssi2dbm = NULL;
+ b43err(dev->wl, "Could not generate tssi2dBm "
+ "table (wrong SPROM info)!\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int b43_aphy_op_allocate(struct b43_wldev *dev)
+{
+ struct b43_phy_a *aphy;
+ int err;
+
+ aphy = kzalloc(sizeof(*aphy), GFP_KERNEL);
+ if (!aphy)
+ return -ENOMEM;
+ dev->phy.a = aphy;
+
+ err = b43_aphy_init_tssi2dbm_table(dev);
+ if (err)
+ goto err_free_aphy;
+
+ return 0;
+
+err_free_aphy:
+ kfree(aphy);
+ dev->phy.a = NULL;
+
+ return err;
+}
+
+static void b43_aphy_op_prepare_structs(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_a *aphy = phy->a;
+ const void *tssi2dbm;
+ int tgt_idle_tssi;
+
+ /* tssi2dbm table is constant, so it is initialized at alloc time.
+ * Save a copy of the pointer. */
+ tssi2dbm = aphy->tssi2dbm;
+ tgt_idle_tssi = aphy->tgt_idle_tssi;
+
+ /* Zero out the whole PHY structure. */
+ memset(aphy, 0, sizeof(*aphy));
+
+ aphy->tssi2dbm = tssi2dbm;
+ aphy->tgt_idle_tssi = tgt_idle_tssi;
+
+ //TODO init struct b43_phy_a
+
+}
+
+static void b43_aphy_op_free(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_a *aphy = phy->a;
+
+ kfree(aphy->tssi2dbm);
+ aphy->tssi2dbm = NULL;
+
+ kfree(aphy);
+ dev->phy.a = NULL;
+}
+
+static int b43_aphy_op_init(struct b43_wldev *dev)
+{
+ b43_phy_inita(dev);
+
+ return 0;
+}
+
+static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset)
+{
+ /* OFDM registers are base-registers for the A-PHY. */
+ if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
+ offset &= ~B43_PHYROUTE;
+ offset |= B43_PHYROUTE_BASE;
+ }
+
+#if B43_DEBUG
+ if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
+ /* Ext-G registers are only available on G-PHYs */
+ b43err(dev->wl, "Invalid EXT-G PHY access at "
+ "0x%04X on A-PHY\n", offset);
+ dump_stack();
+ }
+ if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) {
+ /* N-BMODE registers are only available on N-PHYs */
+ b43err(dev->wl, "Invalid N-BMODE PHY access at "
+ "0x%04X on A-PHY\n", offset);
+ dump_stack();
+ }
+#endif /* B43_DEBUG */
+
+ return offset;
+}
+
+static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+ reg = adjust_phyreg(dev, reg);
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ reg = adjust_phyreg(dev, reg);
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+ /* A-PHY needs 0x40 for read access */
+ reg |= 0x40;
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev)
+{
+ return (dev->phy.rev >= 5);
+}
+
+static void b43_aphy_op_software_rfkill(struct b43_wldev *dev,
+ enum rfkill_state state)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ if (state == RFKILL_STATE_UNBLOCKED) {
+ if (phy->radio_on)
+ return;
+ b43_radio_write16(dev, 0x0004, 0x00C0);
+ b43_radio_write16(dev, 0x0005, 0x0008);
+ b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7);
+ b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7);
+ b43_radio_init2060(dev);
+ } else {
+ b43_radio_write16(dev, 0x0004, 0x00FF);
+ b43_radio_write16(dev, 0x0005, 0x00FB);
+ b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008);
+ b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008);
+ }
+}
+
+static int b43_aphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel)
+{
+ if (new_channel > 200)
+ return -EINVAL;
+ aphy_channel_switch(dev, new_channel);
+
+ return 0;
+}
+
+static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ return 36; /* Default to channel 36 */
+}
+
+static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
+{//TODO
+ struct b43_phy *phy = &dev->phy;
+ u64 hf;
+ u16 tmp;
+ int autodiv = 0;
+
+ if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
+ autodiv = 1;
+
+ hf = b43_hf_read(dev);
+ hf &= ~B43_HF_ANTDIVHELP;
+ b43_hf_write(dev, hf);
+
+ tmp = b43_phy_read(dev, B43_PHY_BBANDCFG);
+ tmp &= ~B43_PHY_BBANDCFG_RXANT;
+ tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
+ << B43_PHY_BBANDCFG_RXANT_SHIFT;
+ b43_phy_write(dev, B43_PHY_BBANDCFG, tmp);
+
+ if (autodiv) {
+ tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
+ if (antenna == B43_ANTENNA_AUTO0)
+ tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
+ else
+ tmp |= B43_PHY_ANTDWELL_AUTODIV1;
+ b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
+ }
+ if (phy->rev < 3) {
+ tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
+ tmp = (tmp & 0xFF00) | 0x24;
+ b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
+ } else {
+ tmp = b43_phy_read(dev, B43_PHY_OFDM61);
+ tmp |= 0x10;
+ b43_phy_write(dev, B43_PHY_OFDM61, tmp);
+ if (phy->analog == 3) {
+ b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
+ 0x1D);
+ b43_phy_write(dev, B43_PHY_ADIVRELATED,
+ 8);
+ } else {
+ b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
+ 0x3A);
+ tmp =
+ b43_phy_read(dev,
+ B43_PHY_ADIVRELATED);
+ tmp = (tmp & 0xFF00) | 8;
+ b43_phy_write(dev, B43_PHY_ADIVRELATED,
+ tmp);
+ }
+ }
+
+ hf |= B43_HF_ANTDIVHELP;
+ b43_hf_write(dev, hf);
+}
+
+static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev)
+{//TODO
+}
+
+static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev,
+ bool ignore_tssi)
+{//TODO
+ return B43_TXPWR_RES_DONE;
+}
+
+static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev)
+{//TODO
+}
+
+static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev)
+{//TODO
+}
+
+const struct b43_phy_operations b43_phyops_a = {
+ .allocate = b43_aphy_op_allocate,
+ .free = b43_aphy_op_free,
+ .prepare_structs = b43_aphy_op_prepare_structs,
+ .init = b43_aphy_op_init,
+ .phy_read = b43_aphy_op_read,
+ .phy_write = b43_aphy_op_write,
+ .radio_read = b43_aphy_op_radio_read,
+ .radio_write = b43_aphy_op_radio_write,
+ .supports_hwpctl = b43_aphy_op_supports_hwpctl,
+ .software_rfkill = b43_aphy_op_software_rfkill,
+ .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_channel = b43_aphy_op_switch_channel,
+ .get_default_chan = b43_aphy_op_get_default_chan,
+ .set_rx_antenna = b43_aphy_op_set_rx_antenna,
+ .recalc_txpower = b43_aphy_op_recalc_txpower,
+ .adjust_txpower = b43_aphy_op_adjust_txpower,
+ .pwork_15sec = b43_aphy_op_pwork_15sec,
+ .pwork_60sec = b43_aphy_op_pwork_60sec,
+};
diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h
new file mode 100644
index 00000000000..5cfaab7b16e
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_a.h
@@ -0,0 +1,130 @@
+#ifndef LINUX_B43_PHY_A_H_
+#define LINUX_B43_PHY_A_H_
+
+#include "phy_common.h"
+
+
+/* OFDM (A) PHY Registers */
+#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */
+#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */
+#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */
+#define B43_PHY_BBANDCFG_RXANT_SHIFT 7
+#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */
+#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */
+#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */
+#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */
+#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */
+#define B43_PHY_CRS0 B43_PHY_OFDM(0x29)
+#define B43_PHY_CRS0_EN 0x4000
+#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30)
+#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */
+#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */
+#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */
+#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */
+#define B43_PHY_LMS B43_PHY_OFDM(0x55)
+#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */
+#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */
+#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */
+#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */
+#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */
+#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */
+#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */
+#define B43_PHY_OTABLENR_SHIFT 10
+#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */
+#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */
+#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */
+#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */
+#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B)
+#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */
+#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */
+#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */
+#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */
+#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */
+#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */
+#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0)
+#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1)
+#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2)
+#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3)
+#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4)
+#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */
+#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */
+#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */
+#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9)
+#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA)
+#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB)
+#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */
+#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */
+#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */
+#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */
+#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */
+#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */
+#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */
+
+/*** OFDM table numbers ***/
+#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
+#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0)
+#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0)
+#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename
+#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4)
+#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0)
+#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3)
+#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0)
+#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0)
+#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0)
+#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0)
+#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0)
+#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0)
+#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0)
+#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0)
+#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7)
+#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12)
+#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13)
+#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename
+#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename
+#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12)
+#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0)
+#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename
+#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0)
+#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove!
+#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0)
+#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0)
+#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4)
+#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0)
+#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0)
+#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0)
+#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0)
+
+u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset);
+void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
+ u16 offset, u16 value);
+u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
+void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
+ u16 offset, u32 value);
+
+
+struct b43_phy_a {
+ /* Pointer to the table used to convert a
+ * TSSI value to dBm-Q5.2 */
+ const s8 *tssi2dbm;
+ /* Target idle TSSI */
+ int tgt_idle_tssi;
+ /* Current idle TSSI */
+ int cur_idle_tssi;//FIXME value currently not set
+
+ /* A-PHY TX Power control value. */
+ u16 txpwr_offset;
+
+ //TODO lots of missing stuff
+};
+
+/**
+ * b43_phy_inita - Lowlevel A-PHY init routine.
+ * This is _only_ used by the G-PHY code.
+ */
+void b43_phy_inita(struct b43_wldev *dev);
+
+
+struct b43_phy_operations;
+extern const struct b43_phy_operations b43_phyops_a;
+
+#endif /* LINUX_B43_PHY_A_H_ */
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
new file mode 100644
index 00000000000..af37abccccb
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -0,0 +1,381 @@
+/*
+
+ Broadcom B43 wireless driver
+ Common PHY routines
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+ Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de>
+ Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
+ Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_a.h"
+#include "phy_n.h"
+#include "phy_lp.h"
+#include "b43.h"
+#include "main.h"
+
+
+int b43_phy_allocate(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &(dev->phy);
+ int err;
+
+ phy->ops = NULL;
+
+ switch (phy->type) {
+ case B43_PHYTYPE_A:
+ phy->ops = &b43_phyops_a;
+ break;
+ case B43_PHYTYPE_G:
+ phy->ops = &b43_phyops_g;
+ break;
+ case B43_PHYTYPE_N:
+#ifdef CONFIG_B43_NPHY
+ phy->ops = &b43_phyops_n;
+#endif
+ break;
+ case B43_PHYTYPE_LP:
+#ifdef CONFIG_B43_PHY_LP
+ phy->ops = &b43_phyops_lp;
+#endif
+ break;
+ }
+ if (B43_WARN_ON(!phy->ops))
+ return -ENODEV;
+
+ err = phy->ops->allocate(dev);
+ if (err)
+ phy->ops = NULL;
+
+ return err;
+}
+
+void b43_phy_free(struct b43_wldev *dev)
+{
+ dev->phy.ops->free(dev);
+ dev->phy.ops = NULL;
+}
+
+int b43_phy_init(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ const struct b43_phy_operations *ops = phy->ops;
+ int err;
+
+ phy->channel = ops->get_default_chan(dev);
+
+ ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+ err = ops->init(dev);
+ if (err) {
+ b43err(dev->wl, "PHY init failed\n");
+ goto err_block_rf;
+ }
+ /* Make sure to switch hardware and firmware (SHM) to
+ * the default channel. */
+ err = b43_switch_channel(dev, ops->get_default_chan(dev));
+ if (err) {
+ b43err(dev->wl, "PHY init: Channel switch to default failed\n");
+ goto err_phy_exit;
+ }
+
+ return 0;
+
+err_phy_exit:
+ if (ops->exit)
+ ops->exit(dev);
+err_block_rf:
+ ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+
+ return err;
+}
+
+void b43_phy_exit(struct b43_wldev *dev)
+{
+ const struct b43_phy_operations *ops = dev->phy.ops;
+
+ ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+ if (ops->exit)
+ ops->exit(dev);
+}
+
+bool b43_has_hardware_pctl(struct b43_wldev *dev)
+{
+ if (!dev->phy.hardware_power_control)
+ return 0;
+ if (!dev->phy.ops->supports_hwpctl)
+ return 0;
+ return dev->phy.ops->supports_hwpctl(dev);
+}
+
+void b43_radio_lock(struct b43_wldev *dev)
+{
+ u32 macctl;
+
+ macctl = b43_read32(dev, B43_MMIO_MACCTL);
+ B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
+ macctl |= B43_MACCTL_RADIOLOCK;
+ b43_write32(dev, B43_MMIO_MACCTL, macctl);
+ /* Commit the write and wait for the device
+ * to exit any radio register access. */
+ b43_read32(dev, B43_MMIO_MACCTL);
+ udelay(10);
+}
+
+void b43_radio_unlock(struct b43_wldev *dev)
+{
+ u32 macctl;
+
+ /* Commit any write */
+ b43_read16(dev, B43_MMIO_PHY_VER);
+ /* unlock */
+ macctl = b43_read32(dev, B43_MMIO_MACCTL);
+ B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
+ macctl &= ~B43_MACCTL_RADIOLOCK;
+ b43_write32(dev, B43_MMIO_MACCTL, macctl);
+}
+
+void b43_phy_lock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+ B43_WARN_ON(dev->phy.phy_locked);
+ dev->phy.phy_locked = 1;
+#endif
+ B43_WARN_ON(dev->dev->id.revision < 3);
+
+ if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+ b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
+}
+
+void b43_phy_unlock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+ B43_WARN_ON(!dev->phy.phy_locked);
+ dev->phy.phy_locked = 0;
+#endif
+ B43_WARN_ON(dev->dev->id.revision < 3);
+
+ if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+ b43_power_saving_ctl_bits(dev, 0);
+}
+
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
+{
+ return dev->phy.ops->radio_read(dev, reg);
+}
+
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ dev->phy.ops->radio_write(dev, reg, value);
+}
+
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+ b43_radio_write16(dev, offset,
+ b43_radio_read16(dev, offset) & mask);
+}
+
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+ b43_radio_write16(dev, offset,
+ b43_radio_read16(dev, offset) | set);
+}
+
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+ b43_radio_write16(dev, offset,
+ (b43_radio_read16(dev, offset) & mask) | set);
+}
+
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
+{
+ return dev->phy.ops->phy_read(dev, reg);
+}
+
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ dev->phy.ops->phy_write(dev, reg, value);
+}
+
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+ b43_phy_write(dev, offset,
+ b43_phy_read(dev, offset) & mask);
+}
+
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+ b43_phy_write(dev, offset,
+ b43_phy_read(dev, offset) | set);
+}
+
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+ b43_phy_write(dev, offset,
+ (b43_phy_read(dev, offset) & mask) | set);
+}
+
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
+{
+ struct b43_phy *phy = &(dev->phy);
+ u16 channelcookie, savedcookie;
+ int err;
+
+ if (new_channel == B43_DEFAULT_CHANNEL)
+ new_channel = phy->ops->get_default_chan(dev);
+
+ /* First we set the channel radio code to prevent the
+ * firmware from sending ghost packets.
+ */
+ channelcookie = new_channel;
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+ channelcookie |= 0x100;
+ //FIXME set 40Mhz flag if required
+ savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
+ b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
+
+ /* Now try to switch the PHY hardware channel. */
+ err = phy->ops->switch_channel(dev, new_channel);
+ if (err)
+ goto err_restore_cookie;
+
+ dev->phy.channel = new_channel;
+ /* Wait for the radio to tune to the channel and stabilize. */
+ msleep(8);
+
+ return 0;
+
+err_restore_cookie:
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_CHAN, savedcookie);
+
+ return err;
+}
+
+void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ if (state == RFKILL_STATE_HARD_BLOCKED) {
+ /* We cannot hardware-block the device */
+ state = RFKILL_STATE_SOFT_BLOCKED;
+ }
+
+ phy->ops->software_rfkill(dev, state);
+ phy->radio_on = (state == RFKILL_STATE_UNBLOCKED);
+}
+
+/**
+ * b43_phy_txpower_adjust_work - TX power workqueue.
+ *
+ * Workqueue for updating the TX power parameters in hardware.
+ */
+void b43_phy_txpower_adjust_work(struct work_struct *work)
+{
+ struct b43_wl *wl = container_of(work, struct b43_wl,
+ txpower_adjust_work);
+ struct b43_wldev *dev;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+
+ if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
+ dev->phy.ops->adjust_txpower(dev);
+
+ mutex_unlock(&wl->mutex);
+}
+
+/* Called with wl->irq_lock locked */
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
+{
+ struct b43_phy *phy = &dev->phy;
+ unsigned long now = jiffies;
+ enum b43_txpwr_result result;
+
+ if (!(flags & B43_TXPWR_IGNORE_TIME)) {
+ /* Check if it's time for a TXpower check. */
+ if (time_before(now, phy->next_txpwr_check_time))
+ return; /* Not yet */
+ }
+ /* The next check will be needed in two seconds, or later. */
+ phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
+
+ if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306))
+ return; /* No software txpower adjustment needed */
+
+ result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
+ if (result == B43_TXPWR_RES_DONE)
+ return; /* We are done. */
+ B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
+ B43_WARN_ON(phy->ops->adjust_txpower == NULL);
+
+ /* We must adjust the transmission power in hardware.
+ * Schedule b43_phy_txpower_adjust_work(). */
+ queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work);
+}
+
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
+{
+ const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
+ unsigned int a, b, c, d;
+ unsigned int average;
+ u32 tmp;
+
+ tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
+ a = tmp & 0xFF;
+ b = (tmp >> 8) & 0xFF;
+ c = (tmp >> 16) & 0xFF;
+ d = (tmp >> 24) & 0xFF;
+ if (a == 0 || a == B43_TSSI_MAX ||
+ b == 0 || b == B43_TSSI_MAX ||
+ c == 0 || c == B43_TSSI_MAX ||
+ d == 0 || d == B43_TSSI_MAX)
+ return -ENOENT;
+ /* The values are OK. Clear them. */
+ tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
+ (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
+ b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
+
+ if (is_ofdm) {
+ a = (a + 32) & 0x3F;
+ b = (b + 32) & 0x3F;
+ c = (c + 32) & 0x3F;
+ d = (d + 32) & 0x3F;
+ }
+
+ /* Get the average of the values with 0.5 added to each value. */
+ average = (a + b + c + d + 2) / 4;
+ if (is_ofdm) {
+ /* Adjust for CCK-boost */
+ if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO)
+ & B43_HF_CCKBOOST)
+ average = (average >= 13) ? (average - 13) : 0;
+ }
+
+ return average;
+}
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+ b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
new file mode 100644
index 00000000000..c9f5430d1d7
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -0,0 +1,413 @@
+#ifndef LINUX_B43_PHY_COMMON_H_
+#define LINUX_B43_PHY_COMMON_H_
+
+#include <linux/rfkill.h>
+
+struct b43_wldev;
+
+
+/* PHY register routing bits */
+#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
+#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
+#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
+#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
+#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */
+
+/* CCK (B-PHY) registers. */
+#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE)
+/* N-PHY registers. */
+#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE)
+/* N-PHY BMODE registers. */
+#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE)
+/* OFDM (A-PHY) registers. */
+#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
+/* Extended G-PHY registers. */
+#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY)
+
+
+/* Masks for the PHY versioning registers. */
+#define B43_PHYVER_ANALOG 0xF000
+#define B43_PHYVER_ANALOG_SHIFT 12
+#define B43_PHYVER_TYPE 0x0F00
+#define B43_PHYVER_TYPE_SHIFT 8
+#define B43_PHYVER_VERSION 0x00FF
+
+/**
+ * enum b43_interference_mitigation - Interference Mitigation mode
+ *
+ * @B43_INTERFMODE_NONE: Disabled
+ * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation
+ * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation
+ * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation
+ */
+enum b43_interference_mitigation {
+ B43_INTERFMODE_NONE,
+ B43_INTERFMODE_NONWLAN,
+ B43_INTERFMODE_MANUALWLAN,
+ B43_INTERFMODE_AUTOWLAN,
+};
+
+/* Antenna identifiers */
+enum {
+ B43_ANTENNA0, /* Antenna 0 */
+ B43_ANTENNA1, /* Antenna 0 */
+ B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */
+ B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */
+ B43_ANTENNA2,
+ B43_ANTENNA3 = 8,
+
+ B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
+ B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO,
+};
+
+/**
+ * enum b43_txpwr_result - Return value for the recalc_txpower PHY op.
+ *
+ * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed.
+ * @B43_TXPWR_RES_DONE: No more work to do. Everything is done.
+ */
+enum b43_txpwr_result {
+ B43_TXPWR_RES_NEED_ADJUST,
+ B43_TXPWR_RES_DONE,
+};
+
+/**
+ * struct b43_phy_operations - Function pointers for PHY ops.
+ *
+ * @allocate: Allocate and initialise the PHY data structures.
+ * Must not be NULL.
+ * @free: Destroy and free the PHY data structures.
+ * Must not be NULL.
+ *
+ * @prepare_structs: Prepare the PHY data structures.
+ * The data structures allocated in @allocate are
+ * initialized here.
+ * Must not be NULL.
+ * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to
+ * do some early early PHY hardware init.
+ * Can be NULL, if not required.
+ * @init: Initialize the PHY.
+ * Must not be NULL.
+ * @exit: Shutdown the PHY.
+ * Can be NULL, if not required.
+ *
+ * @phy_read: Read from a PHY register.
+ * Must not be NULL.
+ * @phy_write: Write to a PHY register.
+ * Must not be NULL.
+ * @radio_read: Read from a Radio register.
+ * Must not be NULL.
+ * @radio_write: Write to a Radio register.
+ * Must not be NULL.
+ *
+ * @supports_hwpctl: Returns a boolean whether Hardware Power Control
+ * is supported or not.
+ * If NULL, hwpctl is assumed to be never supported.
+ * @software_rfkill: Turn the radio ON or OFF.
+ * Possible state values are
+ * RFKILL_STATE_SOFT_BLOCKED or
+ * RFKILL_STATE_UNBLOCKED
+ * Must not be NULL.
+ * @switch_analog: Turn the Analog on/off.
+ * Must not be NULL.
+ * @switch_channel: Switch the radio to another channel.
+ * Must not be NULL.
+ * @get_default_chan: Just returns the default channel number.
+ * Must not be NULL.
+ * @set_rx_antenna: Set the antenna used for RX.
+ * Can be NULL, if not supported.
+ * @interf_mitigation: Switch the Interference Mitigation mode.
+ * Can be NULL, if not supported.
+ *
+ * @recalc_txpower: Recalculate the transmission power parameters.
+ * This callback has to recalculate the TX power settings,
+ * but does not need to write them to the hardware, yet.
+ * Returns enum b43_txpwr_result to indicate whether the hardware
+ * needs to be adjusted.
+ * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower
+ * will be called later.
+ * If the parameter "ignore_tssi" is true, the TSSI values should
+ * be ignored and a recalculation of the power settings should be
+ * done even if the TSSI values did not change.
+ * This callback is called with wl->irq_lock held and must not sleep.
+ * Must not be NULL.
+ * @adjust_txpower: Write the previously calculated TX power settings
+ * (from @recalc_txpower) to the hardware.
+ * This function may sleep.
+ * Can be NULL, if (and ONLY if) @recalc_txpower _always_
+ * returns B43_TXPWR_RES_DONE.
+ *
+ * @pwork_15sec: Periodic work. Called every 15 seconds.
+ * Can be NULL, if not required.
+ * @pwork_60sec: Periodic work. Called every 60 seconds.
+ * Can be NULL, if not required.
+ */
+struct b43_phy_operations {
+ /* Initialisation */
+ int (*allocate)(struct b43_wldev *dev);
+ void (*free)(struct b43_wldev *dev);
+ void (*prepare_structs)(struct b43_wldev *dev);
+ int (*prepare_hardware)(struct b43_wldev *dev);
+ int (*init)(struct b43_wldev *dev);
+ void (*exit)(struct b43_wldev *dev);
+
+ /* Register access */
+ u16 (*phy_read)(struct b43_wldev *dev, u16 reg);
+ void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value);
+ u16 (*radio_read)(struct b43_wldev *dev, u16 reg);
+ void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value);
+
+ /* Radio */
+ bool (*supports_hwpctl)(struct b43_wldev *dev);
+ void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+ void (*switch_analog)(struct b43_wldev *dev, bool on);
+ int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
+ unsigned int (*get_default_chan)(struct b43_wldev *dev);
+ void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
+ int (*interf_mitigation)(struct b43_wldev *dev,
+ enum b43_interference_mitigation new_mode);
+
+ /* Transmission power adjustment */
+ enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev,
+ bool ignore_tssi);
+ void (*adjust_txpower)(struct b43_wldev *dev);
+
+ /* Misc */
+ void (*pwork_15sec)(struct b43_wldev *dev);
+ void (*pwork_60sec)(struct b43_wldev *dev);
+};
+
+struct b43_phy_a;
+struct b43_phy_g;
+struct b43_phy_n;
+struct b43_phy_lp;
+
+struct b43_phy {
+ /* Hardware operation callbacks. */
+ const struct b43_phy_operations *ops;
+
+ /* Most hardware context information is stored in the standard-
+ * specific data structures pointed to by the pointers below.
+ * Only one of them is valid (the currently enabled PHY). */
+#ifdef CONFIG_B43_DEBUG
+ /* No union for debug build to force NULL derefs in buggy code. */
+ struct {
+#else
+ union {
+#endif
+ /* A-PHY specific information */
+ struct b43_phy_a *a;
+ /* G-PHY specific information */
+ struct b43_phy_g *g;
+ /* N-PHY specific information */
+ struct b43_phy_n *n;
+ /* LP-PHY specific information */
+ struct b43_phy_lp *lp;
+ };
+
+ /* Band support flags. */
+ bool supports_2ghz;
+ bool supports_5ghz;
+
+ /* GMODE bit enabled? */
+ bool gmode;
+
+ /* Analog Type */
+ u8 analog;
+ /* B43_PHYTYPE_ */
+ u8 type;
+ /* PHY revision number. */
+ u8 rev;
+
+ /* Radio versioning */
+ u16 radio_manuf; /* Radio manufacturer */
+ u16 radio_ver; /* Radio version */
+ u8 radio_rev; /* Radio revision */
+
+ /* Software state of the radio */
+ bool radio_on;
+
+ /* Desired TX power level (in dBm).
+ * This is set by the user and adjusted in b43_phy_xmitpower(). */
+ int desired_txpower;
+
+ /* Hardware Power Control enabled? */
+ bool hardware_power_control;
+
+ /* The time (in absolute jiffies) when the next TX power output
+ * check is needed. */
+ unsigned long next_txpwr_check_time;
+
+ /* current channel */
+ unsigned int channel;
+
+ /* PHY TX errors counter. */
+ atomic_t txerr_cnt;
+
+#ifdef CONFIG_B43_DEBUG
+ /* PHY registers locked by b43_phy_lock()? */
+ bool phy_locked;
+#endif /* B43_DEBUG */
+};
+
+
+/**
+ * b43_phy_allocate - Allocate PHY structs
+ * Allocate the PHY data structures, based on the current dev->phy.type
+ */
+int b43_phy_allocate(struct b43_wldev *dev);
+
+/**
+ * b43_phy_free - Free PHY structs
+ */
+void b43_phy_free(struct b43_wldev *dev);
+
+/**
+ * b43_phy_init - Initialise the PHY
+ */
+int b43_phy_init(struct b43_wldev *dev);
+
+/**
+ * b43_phy_exit - Cleanup PHY
+ */
+void b43_phy_exit(struct b43_wldev *dev);
+
+/**
+ * b43_has_hardware_pctl - Hardware Power Control supported?
+ * Returns a boolean, whether hardware power control is supported.
+ */
+bool b43_has_hardware_pctl(struct b43_wldev *dev);
+
+/**
+ * b43_phy_read - 16bit PHY register read access
+ */
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg);
+
+/**
+ * b43_phy_write - 16bit PHY register write access
+ */
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value);
+
+/**
+ * b43_phy_mask - Mask a PHY register with a mask
+ */
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask);
+
+/**
+ * b43_phy_set - OR a PHY register with a bitmap
+ */
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set);
+
+/**
+ * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap
+ */
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
+
+/**
+ * b43_radio_read - 16bit Radio register read access
+ */
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg);
+#define b43_radio_read16 b43_radio_read /* DEPRECATED */
+
+/**
+ * b43_radio_write - 16bit Radio register write access
+ */
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value);
+#define b43_radio_write16 b43_radio_write /* DEPRECATED */
+
+/**
+ * b43_radio_mask - Mask a 16bit radio register with a mask
+ */
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask);
+
+/**
+ * b43_radio_set - OR a 16bit radio register with a bitmap
+ */
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set);
+
+/**
+ * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap
+ */
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
+
+/**
+ * b43_radio_lock - Lock firmware radio register access
+ */
+void b43_radio_lock(struct b43_wldev *dev);
+
+/**
+ * b43_radio_unlock - Unlock firmware radio register access
+ */
+void b43_radio_unlock(struct b43_wldev *dev);
+
+/**
+ * b43_phy_lock - Lock firmware PHY register access
+ */
+void b43_phy_lock(struct b43_wldev *dev);
+
+/**
+ * b43_phy_unlock - Unlock firmware PHY register access
+ */
+void b43_phy_unlock(struct b43_wldev *dev);
+
+/**
+ * b43_switch_channel - Switch to another channel
+ */
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel);
+/**
+ * B43_DEFAULT_CHANNEL - Switch to the default channel.
+ */
+#define B43_DEFAULT_CHANNEL UINT_MAX
+
+/**
+ * b43_software_rfkill - Turn the radio ON or OFF in software.
+ */
+void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state);
+
+/**
+ * b43_phy_txpower_check - Check TX power output.
+ *
+ * Compare the current TX power output to the desired power emission
+ * and schedule an adjustment in case it mismatches.
+ * Requires wl->irq_lock locked.
+ *
+ * @flags: OR'ed enum b43_phy_txpower_check_flags flags.
+ * See the docs below.
+ */
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags);
+/**
+ * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check()
+ *
+ * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo
+ * the check now.
+ * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average
+ * TSSI did not change.
+ */
+enum b43_phy_txpower_check_flags {
+ B43_TXPWR_IGNORE_TIME = (1 << 0),
+ B43_TXPWR_IGNORE_TSSI = (1 << 1),
+};
+
+struct work_struct;
+void b43_phy_txpower_adjust_work(struct work_struct *work);
+
+/**
+ * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM.
+ *
+ * @shm_offset: The SHM address to read the values from.
+ *
+ * Returns the average of the 4 TSSI values, or a negative error code.
+ */
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
+
+/**
+ * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
+ *
+ * It does the switching based on the PHY0 core register.
+ * Do _not_ call this directly. Only use it as a switch_analog callback
+ * for struct b43_phy_operations.
+ */
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+
+
+#endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy_g.c
index 305d4cd6fd0..232181f6333 100644
--- a/drivers/net/wireless/b43/phy.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1,10 +1,11 @@
/*
Broadcom B43 wireless driver
+ IEEE 802.11g PHY driver
Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
- Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
+ Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de>
Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
@@ -25,38 +26,14 @@
*/
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitrev.h>
-
#include "b43.h"
-#include "phy.h"
-#include "nphy.h"
-#include "main.h"
-#include "tables.h"
+#include "phy_g.h"
+#include "phy_common.h"
#include "lo.h"
-#include "wa.h"
-
-
-static const s8 b43_tssi2dbm_b_table[] = {
- 0x4D, 0x4C, 0x4B, 0x4A,
- 0x4A, 0x49, 0x48, 0x47,
- 0x47, 0x46, 0x45, 0x45,
- 0x44, 0x43, 0x42, 0x42,
- 0x41, 0x40, 0x3F, 0x3E,
- 0x3D, 0x3C, 0x3B, 0x3A,
- 0x39, 0x38, 0x37, 0x36,
- 0x35, 0x34, 0x32, 0x31,
- 0x30, 0x2F, 0x2D, 0x2C,
- 0x2B, 0x29, 0x28, 0x26,
- 0x25, 0x23, 0x21, 0x1F,
- 0x1D, 0x1A, 0x17, 0x14,
- 0x10, 0x0C, 0x06, 0x00,
- -7, -7, -7, -7,
- -7, -7, -7, -7,
- -7, -7, -7, -7,
-};
+#include "main.h"
+
+#include <linux/bitrev.h>
+
static const s8 b43_tssi2dbm_g_table[] = {
77, 77, 77, 76,
@@ -84,8 +61,20 @@ const u8 b43_radio_channel_codes_bg[] = {
72, 84,
};
+
+static void b43_calc_nrssi_threshold(struct b43_wldev *dev);
+
+
#define bitrev4(tmp) (bitrev8(tmp) >> 4)
-static void b43_phy_initg(struct b43_wldev *dev);
+
+
+/* Get the freq, as it has to be written to the device. */
+static inline u16 channel2freq_bg(u8 channel)
+{
+ B43_WARN_ON(!(channel >= 1 && channel <= 14));
+
+ return b43_radio_channel_codes_bg[channel - 1];
+}
static void generate_rfatt_list(struct b43_wldev *dev,
struct b43_rfatt_list *list)
@@ -130,7 +119,7 @@ static void generate_rfatt_list(struct b43_wldev *dev,
{.att = 9,.with_padmix = 1,},
};
- if (!b43_has_hardware_pctl(phy)) {
+ if (!b43_has_hardware_pctl(dev)) {
/* Software pctl */
list->list = rfatt_0;
list->len = ARRAY_SIZE(rfatt_0);
@@ -174,140 +163,55 @@ static void generate_bbatt_list(struct b43_wldev *dev,
list->max_val = 8;
}
-bool b43_has_hardware_pctl(struct b43_phy *phy)
-{
- if (!phy->hardware_power_control)
- return 0;
- switch (phy->type) {
- case B43_PHYTYPE_A:
- if (phy->rev >= 5)
- return 1;
- break;
- case B43_PHYTYPE_G:
- if (phy->rev >= 6)
- return 1;
- break;
- default:
- B43_WARN_ON(1);
- }
- return 0;
-}
-
static void b43_shm_clear_tssi(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F);
- break;
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F);
- break;
- }
-}
-
-/* Lock the PHY registers against concurrent access from the microcode.
- * This lock is nonrecursive. */
-void b43_phy_lock(struct b43_wldev *dev)
-{
-#if B43_DEBUG
- B43_WARN_ON(dev->phy.phy_locked);
- dev->phy.phy_locked = 1;
-#endif
- B43_WARN_ON(dev->dev->id.revision < 3);
-
- if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP))
- b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
+ b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F);
+ b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F);
+ b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F);
+ b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F);
}
-void b43_phy_unlock(struct b43_wldev *dev)
+/* Synthetic PU workaround */
+static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel)
{
-#if B43_DEBUG
- B43_WARN_ON(!dev->phy.phy_locked);
- dev->phy.phy_locked = 0;
-#endif
- B43_WARN_ON(dev->dev->id.revision < 3);
+ struct b43_phy *phy = &dev->phy;
- if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP))
- b43_power_saving_ctl_bits(dev, 0);
-}
+ might_sleep();
-/* Different PHYs require different register routing flags.
- * This adjusts (and does sanity checks on) the routing flags.
- */
-static inline u16 adjust_phyreg_for_phytype(struct b43_phy *phy,
- u16 offset, struct b43_wldev *dev)
-{
- if (phy->type == B43_PHYTYPE_A) {
- /* OFDM registers are base-registers for the A-PHY. */
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
- offset &= ~B43_PHYROUTE;
- offset |= B43_PHYROUTE_BASE;
- }
+ if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) {
+ /* We do not need the workaround. */
+ return;
}
-#if B43_DEBUG
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
- /* Ext-G registers are only available on G-PHYs */
- if (phy->type != B43_PHYTYPE_G) {
- b43err(dev->wl, "Invalid EXT-G PHY access at "
- "0x%04X on PHY type %u\n", offset, phy->type);
- dump_stack();
- }
- }
- if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) {
- /* N-BMODE registers are only available on N-PHYs */
- if (phy->type != B43_PHYTYPE_N) {
- b43err(dev->wl, "Invalid N-BMODE PHY access at "
- "0x%04X on PHY type %u\n", offset, phy->type);
- dump_stack();
- }
+ if (channel <= 10) {
+ b43_write16(dev, B43_MMIO_CHANNEL,
+ channel2freq_bg(channel + 4));
+ } else {
+ b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1));
}
-#endif /* B43_DEBUG */
-
- return offset;
-}
-
-u16 b43_phy_read(struct b43_wldev * dev, u16 offset)
-{
- struct b43_phy *phy = &dev->phy;
-
- offset = adjust_phyreg_for_phytype(phy, offset, dev);
- b43_write16(dev, B43_MMIO_PHY_CONTROL, offset);
- return b43_read16(dev, B43_MMIO_PHY_DATA);
+ msleep(1);
+ b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
}
-void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val)
+/* Set the baseband attenuation value on chip. */
+void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
+ u16 baseband_attenuation)
{
struct b43_phy *phy = &dev->phy;
- offset = adjust_phyreg_for_phytype(phy, offset, dev);
- b43_write16(dev, B43_MMIO_PHY_CONTROL, offset);
- b43_write16(dev, B43_MMIO_PHY_DATA, val);
-}
-
-void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
-{
- b43_phy_write(dev, offset,
- b43_phy_read(dev, offset) & mask);
-}
-
-void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
-{
- b43_phy_write(dev, offset,
- b43_phy_read(dev, offset) | set);
-}
-
-void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
-{
- b43_phy_write(dev, offset,
- (b43_phy_read(dev, offset) & mask) | set);
+ if (phy->analog == 0) {
+ b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0)
+ & 0xFFF0) |
+ baseband_attenuation);
+ } else if (phy->analog > 1) {
+ b43_phy_write(dev, B43_PHY_DACCTL,
+ (b43_phy_read(dev, B43_PHY_DACCTL)
+ & 0xFFC3) | (baseband_attenuation << 2));
+ } else {
+ b43_phy_write(dev, B43_PHY_DACCTL,
+ (b43_phy_read(dev, B43_PHY_DACCTL)
+ & 0xFF87) | (baseband_attenuation << 3));
+ }
}
/* Adjust the transmission power output (G-PHY) */
@@ -316,7 +220,8 @@ void b43_set_txpower_g(struct b43_wldev *dev,
const struct b43_rfatt *rfatt, u8 tx_control)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
u16 bb, rf;
u16 tx_bias, tx_magn;
@@ -327,11 +232,12 @@ void b43_set_txpower_g(struct b43_wldev *dev,
if (unlikely(tx_bias == 0xFF))
tx_bias = 0;
- /* Save the values for later */
- phy->tx_control = tx_control;
- memcpy(&phy->rfatt, rfatt, sizeof(*rfatt));
- phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX);
- memcpy(&phy->bbatt, bbatt, sizeof(*bbatt));
+ /* Save the values for later. Use memmove, because it's valid
+ * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */
+ gphy->tx_control = tx_control;
+ memmove(&gphy->rfatt, rfatt, sizeof(*rfatt));
+ gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX);
+ memmove(&gphy->bbatt, bbatt, sizeof(*bbatt));
if (b43_debug(dev, B43_DBG_XMITPOWER)) {
b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), "
@@ -340,7 +246,7 @@ void b43_set_txpower_g(struct b43_wldev *dev,
bb, rf, tx_control, tx_bias, tx_magn);
}
- b43_phy_set_baseband_attenuation(dev, bb);
+ b43_gphy_set_baseband_attenuation(dev, bb);
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_RFATT, rf);
if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) {
b43_radio_write16(dev, 0x43,
@@ -358,179 +264,23 @@ void b43_set_txpower_g(struct b43_wldev *dev,
b43_radio_write16(dev, 0x52, (b43_radio_read16(dev, 0x52)
& 0xFFF0) | (tx_bias & 0x000F));
}
- if (phy->type == B43_PHYTYPE_G)
- b43_lo_g_adjust(dev);
-}
-
-static void default_baseband_attenuation(struct b43_wldev *dev,
- struct b43_bbatt *bb)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (phy->radio_ver == 0x2050 && phy->radio_rev < 6)
- bb->att = 0;
- else
- bb->att = 2;
-}
-
-static void default_radio_attenuation(struct b43_wldev *dev,
- struct b43_rfatt *rf)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct b43_phy *phy = &dev->phy;
-
- rf->with_padmix = 0;
-
- if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
- bus->boardinfo.type == SSB_BOARD_BCM4309G) {
- if (bus->boardinfo.rev < 0x43) {
- rf->att = 2;
- return;
- } else if (bus->boardinfo.rev < 0x51) {
- rf->att = 3;
- return;
- }
- }
-
- if (phy->type == B43_PHYTYPE_A) {
- rf->att = 0x60;
- return;
- }
-
- switch (phy->radio_ver) {
- case 0x2053:
- switch (phy->radio_rev) {
- case 1:
- rf->att = 6;
- return;
- }
- break;
- case 0x2050:
- switch (phy->radio_rev) {
- case 0:
- rf->att = 5;
- return;
- case 1:
- if (phy->type == B43_PHYTYPE_G) {
- if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
- && bus->boardinfo.type == SSB_BOARD_BCM4309G
- && bus->boardinfo.rev >= 30)
- rf->att = 3;
- else if (bus->boardinfo.vendor ==
- SSB_BOARDVENDOR_BCM
- && bus->boardinfo.type ==
- SSB_BOARD_BU4306)
- rf->att = 3;
- else
- rf->att = 1;
- } else {
- if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
- && bus->boardinfo.type == SSB_BOARD_BCM4309G
- && bus->boardinfo.rev >= 30)
- rf->att = 7;
- else
- rf->att = 6;
- }
- return;
- case 2:
- if (phy->type == B43_PHYTYPE_G) {
- if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
- && bus->boardinfo.type == SSB_BOARD_BCM4309G
- && bus->boardinfo.rev >= 30)
- rf->att = 3;
- else if (bus->boardinfo.vendor ==
- SSB_BOARDVENDOR_BCM
- && bus->boardinfo.type ==
- SSB_BOARD_BU4306)
- rf->att = 5;
- else if (bus->chip_id == 0x4320)
- rf->att = 4;
- else
- rf->att = 3;
- } else
- rf->att = 6;
- return;
- case 3:
- rf->att = 5;
- return;
- case 4:
- case 5:
- rf->att = 1;
- return;
- case 6:
- case 7:
- rf->att = 5;
- return;
- case 8:
- rf->att = 0xA;
- rf->with_padmix = 1;
- return;
- case 9:
- default:
- rf->att = 5;
- return;
- }
- }
- rf->att = 5;
-}
-
-static u16 default_tx_control(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (phy->radio_ver != 0x2050)
- return 0;
- if (phy->radio_rev == 1)
- return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX;
- if (phy->radio_rev < 6)
- return B43_TXCTL_PA2DB;
- if (phy->radio_rev == 8)
- return B43_TXCTL_TXMIX;
- return 0;
-}
-
-/* This func is called "PHY calibrate" in the specs... */
-void b43_phy_early_init(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
-
- default_baseband_attenuation(dev, &phy->bbatt);
- default_radio_attenuation(dev, &phy->rfatt);
- phy->tx_control = (default_tx_control(dev) << 4);
-
- /* Commit previous writes */
- b43_read32(dev, B43_MMIO_MACCTL);
-
- if (phy->type == B43_PHYTYPE_B || phy->type == B43_PHYTYPE_G) {
- generate_rfatt_list(dev, &lo->rfatt_list);
- generate_bbatt_list(dev, &lo->bbatt_list);
- }
- if (phy->type == B43_PHYTYPE_G && phy->rev == 1) {
- /* Workaround: Temporarly disable gmode through the early init
- * phase, as the gmode stuff is not needed for phy rev 1 */
- phy->gmode = 0;
- b43_wireless_core_reset(dev, 0);
- b43_phy_initg(dev);
- phy->gmode = 1;
- b43_wireless_core_reset(dev, B43_TMSLOW_GMODE);
- }
+ b43_lo_g_adjust(dev);
}
/* GPHY_TSSI_Power_Lookup_Table_Init */
static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
int i;
u16 value;
for (i = 0; i < 32; i++)
- b43_ofdmtab_write16(dev, 0x3C20, i, phy->tssi2dbm[i]);
+ b43_ofdmtab_write16(dev, 0x3C20, i, gphy->tssi2dbm[i]);
for (i = 32; i < 64; i++)
- b43_ofdmtab_write16(dev, 0x3C00, i - 32, phy->tssi2dbm[i]);
+ b43_ofdmtab_write16(dev, 0x3C00, i - 32, gphy->tssi2dbm[i]);
for (i = 0; i < 64; i += 2) {
- value = (u16) phy->tssi2dbm[i];
- value |= ((u16) phy->tssi2dbm[i + 1]) << 8;
+ value = (u16) gphy->tssi2dbm[i];
+ value |= ((u16) gphy->tssi2dbm[i + 1]) << 8;
b43_phy_write(dev, 0x380 + (i / 2), value);
}
}
@@ -539,7 +289,8 @@ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev)
static void b43_gphy_gain_lt_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
u16 nr_written = 0;
u16 tmp;
u8 rf, bb;
@@ -561,1509 +312,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev)
}
}
-static void hardware_pctl_init_aphy(struct b43_wldev *dev)
-{
- //TODO
-}
-
-static void hardware_pctl_init_gphy(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
-
- b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0)
- | (phy->tgt_idle_tssi - phy->cur_idle_tssi));
- b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00)
- | (phy->tgt_idle_tssi - phy->cur_idle_tssi));
- b43_gphy_tssi_power_lt_init(dev);
- b43_gphy_gain_lt_init(dev);
- b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF);
- b43_phy_write(dev, 0x0014, 0x0000);
-
- B43_WARN_ON(phy->rev < 6);
- b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478)
- | 0x0800);
- b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478)
- & 0xFEFF);
- b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801)
- & 0xFFBF);
-
- b43_gphy_dc_lt_init(dev, 1);
-}
-
-/* HardwarePowerControl init for A and G PHY */
-static void b43_hardware_pctl_init(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (!b43_has_hardware_pctl(phy)) {
- /* No hardware power control */
- b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL);
- return;
- }
- /* Init the hwpctl related hardware */
- switch (phy->type) {
- case B43_PHYTYPE_A:
- hardware_pctl_init_aphy(dev);
- break;
- case B43_PHYTYPE_G:
- hardware_pctl_init_gphy(dev);
- break;
- default:
- B43_WARN_ON(1);
- }
- /* Enable hardware pctl in firmware. */
- b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
-}
-
-static void b43_hardware_pctl_early_init(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (!b43_has_hardware_pctl(phy)) {
- b43_phy_write(dev, 0x047A, 0xC111);
- return;
- }
-
- b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF);
- b43_phy_write(dev, 0x002F, 0x0202);
- b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002);
- b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000);
- if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) {
- b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A)
- & 0xFF0F) | 0x0010);
- b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D)
- | 0x8000);
- b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E)
- & 0xFFC0) | 0x0010);
- b43_phy_write(dev, 0x002E, 0xC07F);
- b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
- | 0x0400);
- } else {
- b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
- | 0x0200);
- b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
- | 0x0400);
- b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D)
- & 0x7FFF);
- b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F)
- & 0xFFFE);
- b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E)
- & 0xFFC0) | 0x0010);
- b43_phy_write(dev, 0x002E, 0xC07F);
- b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A)
- & 0xFF0F) | 0x0010);
- }
-}
-
-/* Intialize B/G PHY power control
- * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
- */
-static void b43_phy_init_pctl(struct b43_wldev *dev)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct b43_phy *phy = &dev->phy;
- struct b43_rfatt old_rfatt;
- struct b43_bbatt old_bbatt;
- u8 old_tx_control = 0;
-
- if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->boardinfo.type == SSB_BOARD_BU4306))
- return;
-
- b43_phy_write(dev, 0x0028, 0x8018);
-
- /* This does something with the Analog... */
- b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0)
- & 0xFFDF);
-
- if (phy->type == B43_PHYTYPE_G && !phy->gmode)
- return;
- b43_hardware_pctl_early_init(dev);
- if (phy->cur_idle_tssi == 0) {
- if (phy->radio_ver == 0x2050 && phy->analog == 0) {
- b43_radio_write16(dev, 0x0076,
- (b43_radio_read16(dev, 0x0076)
- & 0x00F7) | 0x0084);
- } else {
- struct b43_rfatt rfatt;
- struct b43_bbatt bbatt;
-
- memcpy(&old_rfatt, &phy->rfatt, sizeof(old_rfatt));
- memcpy(&old_bbatt, &phy->bbatt, sizeof(old_bbatt));
- old_tx_control = phy->tx_control;
-
- bbatt.att = 11;
- if (phy->radio_rev == 8) {
- rfatt.att = 15;
- rfatt.with_padmix = 1;
- } else {
- rfatt.att = 9;
- rfatt.with_padmix = 0;
- }
- b43_set_txpower_g(dev, &bbatt, &rfatt, 0);
- }
- b43_dummy_transmission(dev);
- phy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI);
- if (B43_DEBUG) {
- /* Current-Idle-TSSI sanity check. */
- if (abs(phy->cur_idle_tssi - phy->tgt_idle_tssi) >= 20) {
- b43dbg(dev->wl,
- "!WARNING! Idle-TSSI phy->cur_idle_tssi "
- "measuring failed. (cur=%d, tgt=%d). Disabling TX power "
- "adjustment.\n", phy->cur_idle_tssi,
- phy->tgt_idle_tssi);
- phy->cur_idle_tssi = 0;
- }
- }
- if (phy->radio_ver == 0x2050 && phy->analog == 0) {
- b43_radio_write16(dev, 0x0076,
- b43_radio_read16(dev, 0x0076)
- & 0xFF7B);
- } else {
- b43_set_txpower_g(dev, &old_bbatt,
- &old_rfatt, old_tx_control);
- }
- }
- b43_hardware_pctl_init(dev);
- b43_shm_clear_tssi(dev);
-}
-
-static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable)
-{
- int i;
-
- if (dev->phy.rev < 3) {
- if (enable)
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8);
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, 0xFFF8);
- }
- else
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) {
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]);
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]);
- }
- } else {
- if (enable)
- for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++)
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, 0x0820);
- else
- for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++)
- b43_ofdmtab_write16(dev,
- B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]);
- }
-}
-
-static void b43_phy_ww(struct b43_wldev *dev)
-{
- u16 b, curr_s, best_s = 0xFFFF;
- int i;
-
- b43_phy_write(dev, B43_PHY_CRS0,
- b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN);
- b43_phy_write(dev, B43_PHY_OFDM(0x1B),
- b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000);
- b43_phy_write(dev, B43_PHY_OFDM(0x82),
- (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300);
- b43_radio_write16(dev, 0x0009,
- b43_radio_read16(dev, 0x0009) | 0x0080);
- b43_radio_write16(dev, 0x0012,
- (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002);
- b43_wa_initgains(dev);
- b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5);
- b = b43_phy_read(dev, B43_PHY_PWRDOWN);
- b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005);
- b43_radio_write16(dev, 0x0004,
- b43_radio_read16(dev, 0x0004) | 0x0004);
- for (i = 0x10; i <= 0x20; i++) {
- b43_radio_write16(dev, 0x0013, i);
- curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF;
- if (!curr_s) {
- best_s = 0x0000;
- break;
- } else if (curr_s >= 0x0080)
- curr_s = 0x0100 - curr_s;
- if (curr_s < best_s)
- best_s = curr_s;
- }
- b43_phy_write(dev, B43_PHY_PWRDOWN, b);
- b43_radio_write16(dev, 0x0004,
- b43_radio_read16(dev, 0x0004) & 0xFFFB);
- b43_radio_write16(dev, 0x0013, best_s);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC);
- b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80);
- b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00);
- b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0);
- b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0);
- b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF);
- b43_phy_write(dev, B43_PHY_OFDM(0xBB),
- (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053);
- b43_phy_write(dev, B43_PHY_OFDM61,
- (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120);
- b43_phy_write(dev, B43_PHY_OFDM(0x13),
- (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000);
- b43_phy_write(dev, B43_PHY_OFDM(0x14),
- (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017);
- for (i = 0; i < 6; i++)
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011);
- b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013);
- b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030);
- b43_phy_write(dev, B43_PHY_CRS0,
- b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN);
-}
-
-/* Initialize APHY. This is also called for the GPHY in some cases. */
-static void b43_phy_inita(struct b43_wldev *dev)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct b43_phy *phy = &dev->phy;
-
- might_sleep();
-
- if (phy->rev >= 6) {
- if (phy->type == B43_PHYTYPE_A)
- b43_phy_write(dev, B43_PHY_OFDM(0x1B),
- b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000);
- if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN)
- b43_phy_write(dev, B43_PHY_ENCORE,
- b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010);
- else
- b43_phy_write(dev, B43_PHY_ENCORE,
- b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010);
- }
-
- b43_wa_all(dev);
-
- if (phy->type == B43_PHYTYPE_A) {
- if (phy->gmode && (phy->rev < 3))
- b43_phy_write(dev, 0x0034,
- b43_phy_read(dev, 0x0034) | 0x0001);
- b43_phy_rssiagc(dev, 0);
-
- b43_phy_write(dev, B43_PHY_CRS0,
- b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN);
-
- b43_radio_init2060(dev);
-
- if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
- ((bus->boardinfo.type == SSB_BOARD_BU4306) ||
- (bus->boardinfo.type == SSB_BOARD_BU4309))) {
- ; //TODO: A PHY LO
- }
-
- if (phy->rev >= 3)
- b43_phy_ww(dev);
-
- hardware_pctl_init_aphy(dev);
-
- //TODO: radar detection
- }
-
- if ((phy->type == B43_PHYTYPE_G) &&
- (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
- b43_phy_write(dev, B43_PHY_OFDM(0x6E),
- (b43_phy_read(dev, B43_PHY_OFDM(0x6E))
- & 0xE000) | 0x3CF);
- }
-}
-
-static void b43_phy_initb5(struct b43_wldev *dev)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct b43_phy *phy = &dev->phy;
- u16 offset, value;
- u8 old_channel;
-
- if (phy->analog == 1) {
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A)
- | 0x0050);
- }
- if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) &&
- (bus->boardinfo.type != SSB_BOARD_BU4306)) {
- value = 0x2120;
- for (offset = 0x00A8; offset < 0x00C7; offset++) {
- b43_phy_write(dev, offset, value);
- value += 0x202;
- }
- }
- b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF)
- | 0x0700);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x0038, 0x0667);
-
- if (phy->gmode || phy->rev >= 2) {
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A)
- | 0x0020);
- b43_radio_write16(dev, 0x0051,
- b43_radio_read16(dev, 0x0051)
- | 0x0004);
- }
- b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000);
-
- b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100);
- b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000);
-
- b43_phy_write(dev, 0x001C, 0x186A);
-
- b43_phy_write(dev, 0x0013,
- (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900);
- b43_phy_write(dev, 0x0035,
- (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064);
- b43_phy_write(dev, 0x005D,
- (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A);
- }
-
- if (dev->bad_frames_preempt) {
- b43_phy_write(dev, B43_PHY_RADIO_BITFIELD,
- b43_phy_read(dev,
- B43_PHY_RADIO_BITFIELD) | (1 << 11));
- }
-
- if (phy->analog == 1) {
- b43_phy_write(dev, 0x0026, 0xCE00);
- b43_phy_write(dev, 0x0021, 0x3763);
- b43_phy_write(dev, 0x0022, 0x1BC3);
- b43_phy_write(dev, 0x0023, 0x06F9);
- b43_phy_write(dev, 0x0024, 0x037E);
- } else
- b43_phy_write(dev, 0x0026, 0xCC00);
- b43_phy_write(dev, 0x0030, 0x00C6);
- b43_write16(dev, 0x03EC, 0x3F22);
-
- if (phy->analog == 1)
- b43_phy_write(dev, 0x0020, 0x3E1C);
- else
- b43_phy_write(dev, 0x0020, 0x301C);
-
- if (phy->analog == 0)
- b43_write16(dev, 0x03E4, 0x3000);
-
- old_channel = phy->channel;
- /* Force to channel 7, even if not supported. */
- b43_radio_selectchannel(dev, 7, 0);
-
- if (phy->radio_ver != 0x2050) {
- b43_radio_write16(dev, 0x0075, 0x0080);
- b43_radio_write16(dev, 0x0079, 0x0081);
- }
-
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
-
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x005A, 0x0070);
- }
-
- b43_radio_write16(dev, 0x005B, 0x007B);
- b43_radio_write16(dev, 0x005C, 0x00B0);
-
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007);
-
- b43_radio_selectchannel(dev, old_channel, 0);
-
- b43_phy_write(dev, 0x0014, 0x0080);
- b43_phy_write(dev, 0x0032, 0x00CA);
- b43_phy_write(dev, 0x002A, 0x88A3);
-
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
-
- if (phy->radio_ver == 0x2050)
- b43_radio_write16(dev, 0x005D, 0x000D);
-
- b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004);
-}
-
-static void b43_phy_initb6(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 offset, val;
- u8 old_channel;
-
- b43_phy_write(dev, 0x003E, 0x817A);
- b43_radio_write16(dev, 0x007A,
- (b43_radio_read16(dev, 0x007A) | 0x0058));
- if (phy->radio_rev == 4 || phy->radio_rev == 5) {
- b43_radio_write16(dev, 0x51, 0x37);
- b43_radio_write16(dev, 0x52, 0x70);
- b43_radio_write16(dev, 0x53, 0xB3);
- b43_radio_write16(dev, 0x54, 0x9B);
- b43_radio_write16(dev, 0x5A, 0x88);
- b43_radio_write16(dev, 0x5B, 0x88);
- b43_radio_write16(dev, 0x5D, 0x88);
- b43_radio_write16(dev, 0x5E, 0x88);
- b43_radio_write16(dev, 0x7D, 0x88);
- b43_hf_write(dev, b43_hf_read(dev)
- | B43_HF_TSSIRPSMW);
- }
- B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */
- if (phy->radio_rev == 8) {
- b43_radio_write16(dev, 0x51, 0);
- b43_radio_write16(dev, 0x52, 0x40);
- b43_radio_write16(dev, 0x53, 0xB7);
- b43_radio_write16(dev, 0x54, 0x98);
- b43_radio_write16(dev, 0x5A, 0x88);
- b43_radio_write16(dev, 0x5B, 0x6B);
- b43_radio_write16(dev, 0x5C, 0x0F);
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
- b43_radio_write16(dev, 0x5D, 0xFA);
- b43_radio_write16(dev, 0x5E, 0xD8);
- } else {
- b43_radio_write16(dev, 0x5D, 0xF5);
- b43_radio_write16(dev, 0x5E, 0xB8);
- }
- b43_radio_write16(dev, 0x0073, 0x0003);
- b43_radio_write16(dev, 0x007D, 0x00A8);
- b43_radio_write16(dev, 0x007C, 0x0001);
- b43_radio_write16(dev, 0x007E, 0x0008);
- }
- val = 0x1E1F;
- for (offset = 0x0088; offset < 0x0098; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- val = 0x3E3F;
- for (offset = 0x0098; offset < 0x00A8; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- val = 0x2120;
- for (offset = 0x00A8; offset < 0x00C8; offset++) {
- b43_phy_write(dev, offset, (val & 0x3F3F));
- val += 0x0202;
- }
- if (phy->type == B43_PHYTYPE_G) {
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0020);
- b43_radio_write16(dev, 0x0051,
- b43_radio_read16(dev, 0x0051) | 0x0004);
- b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100);
- b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000);
- b43_phy_write(dev, 0x5B, 0);
- b43_phy_write(dev, 0x5C, 0);
- }
-
- old_channel = phy->channel;
- if (old_channel >= 8)
- b43_radio_selectchannel(dev, 1, 0);
- else
- b43_radio_selectchannel(dev, 13, 0);
-
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
- udelay(40);
- if (phy->radio_rev < 6 || phy->radio_rev == 8) {
- b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C)
- | 0x0002));
- b43_radio_write16(dev, 0x50, 0x20);
- }
- if (phy->radio_rev <= 2) {
- b43_radio_write16(dev, 0x7C, 0x20);
- b43_radio_write16(dev, 0x5A, 0x70);
- b43_radio_write16(dev, 0x5B, 0x7B);
- b43_radio_write16(dev, 0x5C, 0xB0);
- }
- b43_radio_write16(dev, 0x007A,
- (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007);
-
- b43_radio_selectchannel(dev, old_channel, 0);
-
- b43_phy_write(dev, 0x0014, 0x0200);
- if (phy->radio_rev >= 6)
- b43_phy_write(dev, 0x2A, 0x88C2);
- else
- b43_phy_write(dev, 0x2A, 0x8AC0);
- b43_phy_write(dev, 0x0038, 0x0668);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
- if (phy->radio_rev <= 5) {
- b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D)
- & 0xFF80) | 0x0003);
- }
- if (phy->radio_rev <= 2)
- b43_radio_write16(dev, 0x005D, 0x000D);
-
- if (phy->analog == 4) {
- b43_write16(dev, 0x3E4, 9);
- b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61)
- & 0x0FFF);
- } else {
- b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0)
- | 0x0004);
- }
- if (phy->type == B43_PHYTYPE_B)
- B43_WARN_ON(1);
- else if (phy->type == B43_PHYTYPE_G)
- b43_write16(dev, 0x03E6, 0x0);
-}
-
-static void b43_calc_loopback_gain(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 backup_phy[16] = { 0 };
- u16 backup_radio[3];
- u16 backup_bband;
- u16 i, j, loop_i_max;
- u16 trsw_rx;
- u16 loop1_outer_done, loop1_inner_done;
-
- backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0);
- backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG);
- backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER);
- backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL);
- if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
- backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER);
- backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL);
- }
- backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A));
- backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59));
- backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58));
- backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A));
- backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03));
- backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK);
- backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL);
- backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B));
- backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL);
- backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE);
- backup_bband = phy->bbatt.att;
- backup_radio[0] = b43_radio_read16(dev, 0x52);
- backup_radio[1] = b43_radio_read16(dev, 0x43);
- backup_radio[2] = b43_radio_read16(dev, 0x7A);
-
- b43_phy_write(dev, B43_PHY_CRS0,
- b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF);
- b43_phy_write(dev, B43_PHY_CCKBBANDCFG,
- b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000);
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD);
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE);
- if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
- b43_phy_write(dev, B43_PHY_ANALOGOVER,
- b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
- b43_phy_read(dev,
- B43_PHY_ANALOGOVERVAL) & 0xFFFE);
- b43_phy_write(dev, B43_PHY_ANALOGOVER,
- b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
- b43_phy_read(dev,
- B43_PHY_ANALOGOVERVAL) & 0xFFFD);
- }
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C);
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- (b43_phy_read(dev, B43_PHY_RFOVERVAL)
- & 0xFFCF) | 0x10);
-
- b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780);
- b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810);
- b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D);
-
- b43_phy_write(dev, B43_PHY_CCK(0x0A),
- b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000);
- if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
- b43_phy_write(dev, B43_PHY_ANALOGOVER,
- b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
- b43_phy_read(dev,
- B43_PHY_ANALOGOVERVAL) & 0xFFFB);
- }
- b43_phy_write(dev, B43_PHY_CCK(0x03),
- (b43_phy_read(dev, B43_PHY_CCK(0x03))
- & 0xFF9F) | 0x40);
-
- if (phy->radio_rev == 8) {
- b43_radio_write16(dev, 0x43, 0x000F);
- } else {
- b43_radio_write16(dev, 0x52, 0);
- b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
- & 0xFFF0) | 0x9);
- }
- b43_phy_set_baseband_attenuation(dev, 11);
-
- if (phy->rev >= 3)
- b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020);
- else
- b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020);
- b43_phy_write(dev, B43_PHY_LO_CTL, 0);
-
- b43_phy_write(dev, B43_PHY_CCK(0x2B),
- (b43_phy_read(dev, B43_PHY_CCK(0x2B))
- & 0xFFC0) | 0x01);
- b43_phy_write(dev, B43_PHY_CCK(0x2B),
- (b43_phy_read(dev, B43_PHY_CCK(0x2B))
- & 0xC0FF) | 0x800);
-
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF);
-
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
- if (phy->rev >= 7) {
- b43_phy_write(dev, B43_PHY_RFOVER,
- b43_phy_read(dev, B43_PHY_RFOVER)
- | 0x0800);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL)
- | 0x8000);
- }
- }
- b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A)
- & 0x00F7);
-
- j = 0;
- loop_i_max = (phy->radio_rev == 8) ? 15 : 9;
- for (i = 0; i < loop_i_max; i++) {
- for (j = 0; j < 16; j++) {
- b43_radio_write16(dev, 0x43, i);
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- (b43_phy_read(dev, B43_PHY_RFOVERVAL)
- & 0xF0FF) | (j << 8));
- b43_phy_write(dev, B43_PHY_PGACTL,
- (b43_phy_read(dev, B43_PHY_PGACTL)
- & 0x0FFF) | 0xA000);
- b43_phy_write(dev, B43_PHY_PGACTL,
- b43_phy_read(dev, B43_PHY_PGACTL)
- | 0xF000);
- udelay(20);
- if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC)
- goto exit_loop1;
- }
- }
- exit_loop1:
- loop1_outer_done = i;
- loop1_inner_done = j;
- if (j >= 8) {
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- b43_phy_read(dev, B43_PHY_RFOVERVAL)
- | 0x30);
- trsw_rx = 0x1B;
- for (j = j - 8; j < 16; j++) {
- b43_phy_write(dev, B43_PHY_RFOVERVAL,
- (b43_phy_read(dev, B43_PHY_RFOVERVAL)
- & 0xF0FF) | (j << 8));
- b43_phy_write(dev, B43_PHY_PGACTL,
- (b43_phy_read(dev, B43_PHY_PGACTL)
- & 0x0FFF) | 0xA000);
- b43_phy_write(dev, B43_PHY_PGACTL,
- b43_phy_read(dev, B43_PHY_PGACTL)
- | 0xF000);
- udelay(20);
- trsw_rx -= 3;
- if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC)
- goto exit_loop2;
- }
- } else
- trsw_rx = 0x18;
- exit_loop2:
-
- if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
- b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]);
- }
- b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]);
- b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]);
- b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]);
- b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]);
- b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]);
- b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]);
- b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]);
- b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]);
- b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]);
-
- b43_phy_set_baseband_attenuation(dev, backup_bband);
-
- b43_radio_write16(dev, 0x52, backup_radio[0]);
- b43_radio_write16(dev, 0x43, backup_radio[1]);
- b43_radio_write16(dev, 0x7A, backup_radio[2]);
-
- b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003);
- udelay(10);
- b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]);
- b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]);
- b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]);
- b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]);
-
- phy->max_lb_gain =
- ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11;
- phy->trsw_rx_gain = trsw_rx * 2;
-}
-
-static void b43_phy_initg(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 tmp;
-
- if (phy->rev == 1)
- b43_phy_initb5(dev);
- else
- b43_phy_initb6(dev);
-
- if (phy->rev >= 2 || phy->gmode)
- b43_phy_inita(dev);
-
- if (phy->rev >= 2) {
- b43_phy_write(dev, B43_PHY_ANALOGOVER, 0);
- b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0);
- }
- if (phy->rev == 2) {
- b43_phy_write(dev, B43_PHY_RFOVER, 0);
- b43_phy_write(dev, B43_PHY_PGACTL, 0xC0);
- }
- if (phy->rev > 5) {
- b43_phy_write(dev, B43_PHY_RFOVER, 0x400);
- b43_phy_write(dev, B43_PHY_PGACTL, 0xC0);
- }
- if (phy->gmode || phy->rev >= 2) {
- tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM);
- tmp &= B43_PHYVER_VERSION;
- if (tmp == 3 || tmp == 5) {
- b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816);
- b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006);
- }
- if (tmp == 5) {
- b43_phy_write(dev, B43_PHY_OFDM(0xCC),
- (b43_phy_read(dev, B43_PHY_OFDM(0xCC))
- & 0x00FF) | 0x1F00);
- }
- }
- if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2)
- b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78);
- if (phy->radio_rev == 8) {
- b43_phy_write(dev, B43_PHY_EXTG(0x01),
- b43_phy_read(dev, B43_PHY_EXTG(0x01))
- | 0x80);
- b43_phy_write(dev, B43_PHY_OFDM(0x3E),
- b43_phy_read(dev, B43_PHY_OFDM(0x3E))
- | 0x4);
- }
- if (has_loopback_gain(phy))
- b43_calc_loopback_gain(dev);
-
- if (phy->radio_rev != 8) {
- if (phy->initval == 0xFFFF)
- phy->initval = b43_radio_init2050(dev);
- else
- b43_radio_write16(dev, 0x0078, phy->initval);
- }
- b43_lo_g_init(dev);
- if (has_tx_magnification(phy)) {
- b43_radio_write16(dev, 0x52,
- (b43_radio_read16(dev, 0x52) & 0xFF00)
- | phy->lo_control->tx_bias | phy->
- lo_control->tx_magn);
- } else {
- b43_radio_write16(dev, 0x52,
- (b43_radio_read16(dev, 0x52) & 0xFFF0)
- | phy->lo_control->tx_bias);
- }
- if (phy->rev >= 6) {
- b43_phy_write(dev, B43_PHY_CCK(0x36),
- (b43_phy_read(dev, B43_PHY_CCK(0x36))
- & 0x0FFF) | (phy->lo_control->
- tx_bias << 12));
- }
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
- b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
- else
- b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
- if (phy->rev < 2)
- b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101);
- else
- b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202);
- if (phy->gmode || phy->rev >= 2) {
- b43_lo_g_adjust(dev);
- b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
- }
-
- if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
- /* The specs state to update the NRSSI LT with
- * the value 0x7FFFFFFF here. I think that is some weird
- * compiler optimization in the original driver.
- * Essentially, what we do here is resetting all NRSSI LT
- * entries to -32 (see the clamp_val() in nrssi_hw_update())
- */
- b43_nrssi_hw_update(dev, 0xFFFF); //FIXME?
- b43_calc_nrssi_threshold(dev);
- } else if (phy->gmode || phy->rev >= 2) {
- if (phy->nrssi[0] == -1000) {
- B43_WARN_ON(phy->nrssi[1] != -1000);
- b43_calc_nrssi_slope(dev);
- } else
- b43_calc_nrssi_threshold(dev);
- }
- if (phy->radio_rev == 8)
- b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230);
- b43_phy_init_pctl(dev);
- /* FIXME: The spec says in the following if, the 0 should be replaced
- 'if OFDM may not be used in the current locale'
- but OFDM is legal everywhere */
- if ((dev->dev->bus->chip_id == 0x4306
- && dev->dev->bus->chip_package == 2) || 0) {
- b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0)
- & 0xBFFF);
- b43_phy_write(dev, B43_PHY_OFDM(0xC3),
- b43_phy_read(dev, B43_PHY_OFDM(0xC3))
- & 0x7FFF);
- }
-}
-
-/* Set the baseband attenuation value on chip. */
-void b43_phy_set_baseband_attenuation(struct b43_wldev *dev,
- u16 baseband_attenuation)
-{
- struct b43_phy *phy = &dev->phy;
-
- if (phy->analog == 0) {
- b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0)
- & 0xFFF0) |
- baseband_attenuation);
- } else if (phy->analog > 1) {
- b43_phy_write(dev, B43_PHY_DACCTL,
- (b43_phy_read(dev, B43_PHY_DACCTL)
- & 0xFFC3) | (baseband_attenuation << 2));
- } else {
- b43_phy_write(dev, B43_PHY_DACCTL,
- (b43_phy_read(dev, B43_PHY_DACCTL)
- & 0xFF87) | (baseband_attenuation << 3));
- }
-}
-
-/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
- * This function converts a TSSI value to dBm in Q5.2
- */
-static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
-{
- struct b43_phy *phy = &dev->phy;
- s8 dbm = 0;
- s32 tmp;
-
- tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi);
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- tmp += 0x80;
- tmp = clamp_val(tmp, 0x00, 0xFF);
- dbm = phy->tssi2dbm[tmp];
- //TODO: There's a FIXME on the specs
- break;
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:
- tmp = clamp_val(tmp, 0x00, 0x3F);
- dbm = phy->tssi2dbm[tmp];
- break;
- default:
- B43_WARN_ON(1);
- }
-
- return dbm;
-}
-
-void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
- int *_bbatt, int *_rfatt)
-{
- int rfatt = *_rfatt;
- int bbatt = *_bbatt;
- struct b43_txpower_lo_control *lo = dev->phy.lo_control;
-
- /* Get baseband and radio attenuation values into their permitted ranges.
- * Radio attenuation affects power level 4 times as much as baseband. */
-
- /* Range constants */
- const int rf_min = lo->rfatt_list.min_val;
- const int rf_max = lo->rfatt_list.max_val;
- const int bb_min = lo->bbatt_list.min_val;
- const int bb_max = lo->bbatt_list.max_val;
-
- while (1) {
- if (rfatt > rf_max && bbatt > bb_max - 4)
- break; /* Can not get it into ranges */
- if (rfatt < rf_min && bbatt < bb_min + 4)
- break; /* Can not get it into ranges */
- if (bbatt > bb_max && rfatt > rf_max - 1)
- break; /* Can not get it into ranges */
- if (bbatt < bb_min && rfatt < rf_min + 1)
- break; /* Can not get it into ranges */
-
- if (bbatt > bb_max) {
- bbatt -= 4;
- rfatt += 1;
- continue;
- }
- if (bbatt < bb_min) {
- bbatt += 4;
- rfatt -= 1;
- continue;
- }
- if (rfatt > rf_max) {
- rfatt -= 1;
- bbatt += 4;
- continue;
- }
- if (rfatt < rf_min) {
- rfatt += 1;
- bbatt -= 4;
- continue;
- }
- break;
- }
-
- *_rfatt = clamp_val(rfatt, rf_min, rf_max);
- *_bbatt = clamp_val(bbatt, bb_min, bb_max);
-}
-
-/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
-void b43_phy_xmitpower(struct b43_wldev *dev)
-{
- struct ssb_bus *bus = dev->dev->bus;
- struct b43_phy *phy = &dev->phy;
-
- if (phy->cur_idle_tssi == 0)
- return;
- if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
- (bus->boardinfo.type == SSB_BOARD_BU4306))
- return;
-#ifdef CONFIG_B43_DEBUG
- if (phy->manual_txpower_control)
- return;
-#endif
-
- switch (phy->type) {
- case B43_PHYTYPE_A:{
-
- //TODO: Nothing for A PHYs yet :-/
-
- break;
- }
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:{
- u16 tmp;
- s8 v0, v1, v2, v3;
- s8 average;
- int max_pwr;
- int desired_pwr, estimated_pwr, pwr_adjust;
- int rfatt_delta, bbatt_delta;
- int rfatt, bbatt;
- u8 tx_control;
-
- tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058);
- v0 = (s8) (tmp & 0x00FF);
- v1 = (s8) ((tmp & 0xFF00) >> 8);
- tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A);
- v2 = (s8) (tmp & 0x00FF);
- v3 = (s8) ((tmp & 0xFF00) >> 8);
- tmp = 0;
-
- if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
- || v3 == 0x7F) {
- tmp =
- b43_shm_read16(dev, B43_SHM_SHARED, 0x0070);
- v0 = (s8) (tmp & 0x00FF);
- v1 = (s8) ((tmp & 0xFF00) >> 8);
- tmp =
- b43_shm_read16(dev, B43_SHM_SHARED, 0x0072);
- v2 = (s8) (tmp & 0x00FF);
- v3 = (s8) ((tmp & 0xFF00) >> 8);
- if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
- || v3 == 0x7F)
- return;
- v0 = (v0 + 0x20) & 0x3F;
- v1 = (v1 + 0x20) & 0x3F;
- v2 = (v2 + 0x20) & 0x3F;
- v3 = (v3 + 0x20) & 0x3F;
- tmp = 1;
- }
- b43_shm_clear_tssi(dev);
-
- average = (v0 + v1 + v2 + v3 + 2) / 4;
-
- if (tmp
- && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) &
- 0x8))
- average -= 13;
-
- estimated_pwr =
- b43_phy_estimate_power_out(dev, average);
-
- max_pwr = dev->dev->bus->sprom.maxpwr_bg;
- if ((dev->dev->bus->sprom.boardflags_lo
- & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
- max_pwr -= 0x3;
- if (unlikely(max_pwr <= 0)) {
- b43warn(dev->wl,
- "Invalid max-TX-power value in SPROM.\n");
- max_pwr = 60; /* fake it */
- dev->dev->bus->sprom.maxpwr_bg = max_pwr;
- }
-
- /*TODO:
- max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr)
- where REG is the max power as per the regulatory domain
- */
-
- /* Get desired power (in Q5.2) */
- desired_pwr = INT_TO_Q52(phy->power_level);
- /* And limit it. max_pwr already is Q5.2 */
- desired_pwr = clamp_val(desired_pwr, 0, max_pwr);
- if (b43_debug(dev, B43_DBG_XMITPOWER)) {
- b43dbg(dev->wl,
- "Current TX power output: " Q52_FMT
- " dBm, " "Desired TX power output: "
- Q52_FMT " dBm\n", Q52_ARG(estimated_pwr),
- Q52_ARG(desired_pwr));
- }
-
- /* Calculate the adjustment delta. */
- pwr_adjust = desired_pwr - estimated_pwr;
-
- /* RF attenuation delta. */
- rfatt_delta = ((pwr_adjust + 7) / 8);
- /* Lower attenuation => Bigger power output. Negate it. */
- rfatt_delta = -rfatt_delta;
-
- /* Baseband attenuation delta. */
- bbatt_delta = pwr_adjust / 2;
- /* Lower attenuation => Bigger power output. Negate it. */
- bbatt_delta = -bbatt_delta;
- /* RF att affects power level 4 times as much as
- * Baseband attennuation. Subtract it. */
- bbatt_delta -= 4 * rfatt_delta;
-
- /* So do we finally need to adjust something? */
- if ((rfatt_delta == 0) && (bbatt_delta == 0))
- return;
-
- /* Calculate the new attenuation values. */
- bbatt = phy->bbatt.att;
- bbatt += bbatt_delta;
- rfatt = phy->rfatt.att;
- rfatt += rfatt_delta;
-
- b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
- tx_control = phy->tx_control;
- if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) {
- if (rfatt <= 1) {
- if (tx_control == 0) {
- tx_control =
- B43_TXCTL_PA2DB |
- B43_TXCTL_TXMIX;
- rfatt += 2;
- bbatt += 2;
- } else if (dev->dev->bus->sprom.
- boardflags_lo &
- B43_BFL_PACTRL) {
- bbatt += 4 * (rfatt - 2);
- rfatt = 2;
- }
- } else if (rfatt > 4 && tx_control) {
- tx_control = 0;
- if (bbatt < 3) {
- rfatt -= 3;
- bbatt += 2;
- } else {
- rfatt -= 2;
- bbatt -= 2;
- }
- }
- }
- /* Save the control values */
- phy->tx_control = tx_control;
- b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
- phy->rfatt.att = rfatt;
- phy->bbatt.att = bbatt;
-
- /* Adjust the hardware */
- b43_phy_lock(dev);
- b43_radio_lock(dev);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt,
- phy->tx_control);
- b43_radio_unlock(dev);
- b43_phy_unlock(dev);
- break;
- }
- case B43_PHYTYPE_N:
- b43_nphy_xmitpower(dev);
- break;
- default:
- B43_WARN_ON(1);
- }
-}
-
-static inline s32 b43_tssi2dbm_ad(s32 num, s32 den)
-{
- if (num < 0)
- return num / den;
- else
- return (num + den / 2) / den;
-}
-
-static inline
- s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2)
-{
- s32 m1, m2, f = 256, q, delta;
- s8 i = 0;
-
- m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32);
- m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1);
- do {
- if (i > 15)
- return -EINVAL;
- q = b43_tssi2dbm_ad(f * 4096 -
- b43_tssi2dbm_ad(m2 * f, 16) * f, 2048);
- delta = abs(q - f);
- f = q;
- i++;
- } while (delta >= 2);
- entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128);
- return 0;
-}
-
-/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */
-int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- s16 pab0, pab1, pab2;
- u8 idx;
- s8 *dyn_tssi2dbm;
-
- if (phy->type == B43_PHYTYPE_A) {
- pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
- pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
- pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
- } else {
- pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
- pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
- pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
- }
-
- if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
- phy->tgt_idle_tssi = 0x34;
- phy->tssi2dbm = b43_tssi2dbm_b_table;
- return 0;
- }
-
- if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
- pab0 != -1 && pab1 != -1 && pab2 != -1) {
- /* The pabX values are set in SPROM. Use them. */
- if (phy->type == B43_PHYTYPE_A) {
- if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
- (s8) dev->dev->bus->sprom.itssi_a != -1)
- phy->tgt_idle_tssi =
- (s8) (dev->dev->bus->sprom.itssi_a);
- else
- phy->tgt_idle_tssi = 62;
- } else {
- if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
- (s8) dev->dev->bus->sprom.itssi_bg != -1)
- phy->tgt_idle_tssi =
- (s8) (dev->dev->bus->sprom.itssi_bg);
- else
- phy->tgt_idle_tssi = 62;
- }
- dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
- if (dyn_tssi2dbm == NULL) {
- b43err(dev->wl, "Could not allocate memory "
- "for tssi2dbm table\n");
- return -ENOMEM;
- }
- for (idx = 0; idx < 64; idx++)
- if (b43_tssi2dbm_entry
- (dyn_tssi2dbm, idx, pab0, pab1, pab2)) {
- phy->tssi2dbm = NULL;
- b43err(dev->wl, "Could not generate "
- "tssi2dBm table\n");
- kfree(dyn_tssi2dbm);
- return -ENODEV;
- }
- phy->tssi2dbm = dyn_tssi2dbm;
- phy->dyn_tssi_tbl = 1;
- } else {
- /* pabX values not set in SPROM. */
- switch (phy->type) {
- case B43_PHYTYPE_A:
- /* APHY needs a generated table. */
- phy->tssi2dbm = NULL;
- b43err(dev->wl, "Could not generate tssi2dBm "
- "table (wrong SPROM info)!\n");
- return -ENODEV;
- case B43_PHYTYPE_B:
- phy->tgt_idle_tssi = 0x34;
- phy->tssi2dbm = b43_tssi2dbm_b_table;
- break;
- case B43_PHYTYPE_G:
- phy->tgt_idle_tssi = 0x34;
- phy->tssi2dbm = b43_tssi2dbm_g_table;
- break;
- }
- }
-
- return 0;
-}
-
-int b43_phy_init(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- bool unsupported = 0;
- int err = 0;
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- if (phy->rev == 2 || phy->rev == 3)
- b43_phy_inita(dev);
- else
- unsupported = 1;
- break;
- case B43_PHYTYPE_G:
- b43_phy_initg(dev);
- break;
- case B43_PHYTYPE_N:
- err = b43_phy_initn(dev);
- break;
- default:
- unsupported = 1;
- }
- if (unsupported)
- b43err(dev->wl, "Unknown PHYTYPE found\n");
-
- return err;
-}
-
-void b43_set_rx_antenna(struct b43_wldev *dev, int antenna)
-{
- struct b43_phy *phy = &dev->phy;
- u64 hf;
- u16 tmp;
- int autodiv = 0;
-
- if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
- autodiv = 1;
-
- hf = b43_hf_read(dev);
- hf &= ~B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- case B43_PHYTYPE_G:
- tmp = b43_phy_read(dev, B43_PHY_BBANDCFG);
- tmp &= ~B43_PHY_BBANDCFG_RXANT;
- tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
- << B43_PHY_BBANDCFG_RXANT_SHIFT;
- b43_phy_write(dev, B43_PHY_BBANDCFG, tmp);
-
- if (autodiv) {
- tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- if (antenna == B43_ANTENNA_AUTO0)
- tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
- else
- tmp |= B43_PHY_ANTDWELL_AUTODIV1;
- b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
- }
- if (phy->type == B43_PHYTYPE_G) {
- tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT);
- if (autodiv)
- tmp |= B43_PHY_ANTWRSETT_ARXDIV;
- else
- tmp &= ~B43_PHY_ANTWRSETT_ARXDIV;
- b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp);
- if (phy->rev >= 2) {
- tmp = b43_phy_read(dev, B43_PHY_OFDM61);
- tmp |= B43_PHY_OFDM61_10;
- b43_phy_write(dev, B43_PHY_OFDM61, tmp);
-
- tmp =
- b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK);
- tmp = (tmp & 0xFF00) | 0x15;
- b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK,
- tmp);
-
- if (phy->rev == 2) {
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- 8);
- } else {
- tmp =
- b43_phy_read(dev,
- B43_PHY_ADIVRELATED);
- tmp = (tmp & 0xFF00) | 8;
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- tmp);
- }
- }
- if (phy->rev >= 6)
- b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC);
- } else {
- if (phy->rev < 3) {
- tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- tmp = (tmp & 0xFF00) | 0x24;
- b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
- } else {
- tmp = b43_phy_read(dev, B43_PHY_OFDM61);
- tmp |= 0x10;
- b43_phy_write(dev, B43_PHY_OFDM61, tmp);
- if (phy->analog == 3) {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
- 0x1D);
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- 8);
- } else {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
- 0x3A);
- tmp =
- b43_phy_read(dev,
- B43_PHY_ADIVRELATED);
- tmp = (tmp & 0xFF00) | 8;
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- tmp);
- }
- }
- }
- break;
- case B43_PHYTYPE_B:
- tmp = b43_phy_read(dev, B43_PHY_CCKBBANDCFG);
- tmp &= ~B43_PHY_BBANDCFG_RXANT;
- tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
- << B43_PHY_BBANDCFG_RXANT_SHIFT;
- b43_phy_write(dev, B43_PHY_CCKBBANDCFG, tmp);
- break;
- case B43_PHYTYPE_N:
- b43_nphy_set_rxantenna(dev, antenna);
- break;
- default:
- B43_WARN_ON(1);
- }
-
- hf |= B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
-}
-
-/* Get the freq, as it has to be written to the device. */
-static inline u16 channel2freq_bg(u8 channel)
-{
- B43_WARN_ON(!(channel >= 1 && channel <= 14));
-
- return b43_radio_channel_codes_bg[channel - 1];
-}
-
-/* Get the freq, as it has to be written to the device. */
-static inline u16 channel2freq_a(u8 channel)
-{
- B43_WARN_ON(channel > 200);
-
- return (5000 + 5 * channel);
-}
-
-void b43_radio_lock(struct b43_wldev *dev)
-{
- u32 macctl;
-
- macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
- macctl |= B43_MACCTL_RADIOLOCK;
- b43_write32(dev, B43_MMIO_MACCTL, macctl);
- /* Commit the write and wait for the device
- * to exit any radio register access. */
- b43_read32(dev, B43_MMIO_MACCTL);
- udelay(10);
-}
-
-void b43_radio_unlock(struct b43_wldev *dev)
-{
- u32 macctl;
-
- /* Commit any write */
- b43_read16(dev, B43_MMIO_PHY_VER);
- /* unlock */
- macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
- macctl &= ~B43_MACCTL_RADIOLOCK;
- b43_write32(dev, B43_MMIO_MACCTL, macctl);
-}
-
-u16 b43_radio_read16(struct b43_wldev *dev, u16 offset)
-{
- struct b43_phy *phy = &dev->phy;
-
- /* Offset 1 is a 32-bit register. */
- B43_WARN_ON(offset == 1);
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- offset |= 0x40;
- break;
- case B43_PHYTYPE_B:
- if (phy->radio_ver == 0x2053) {
- if (offset < 0x70)
- offset += 0x80;
- else if (offset < 0x80)
- offset += 0x70;
- } else if (phy->radio_ver == 0x2050) {
- offset |= 0x80;
- } else
- B43_WARN_ON(1);
- break;
- case B43_PHYTYPE_G:
- offset |= 0x80;
- break;
- case B43_PHYTYPE_N:
- offset |= 0x100;
- break;
- case B43_PHYTYPE_LP:
- /* No adjustment required. */
- break;
- default:
- B43_WARN_ON(1);
- }
-
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset);
- return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
-}
-
-void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val)
-{
- /* Offset 1 is a 32-bit register. */
- B43_WARN_ON(offset == 1);
-
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset);
- b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, val);
-}
-
-void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
-{
- b43_radio_write16(dev, offset,
- b43_radio_read16(dev, offset) & mask);
-}
-
-void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
-{
- b43_radio_write16(dev, offset,
- b43_radio_read16(dev, offset) | set);
-}
-
-void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
-{
- b43_radio_write16(dev, offset,
- (b43_radio_read16(dev, offset) & mask) | set);
-}
-
static void b43_set_all_gains(struct b43_wldev *dev,
s16 first, s16 second, s16 third)
{
@@ -2134,108 +382,10 @@ static void b43_set_original_gains(struct b43_wldev *dev)
b43_dummy_transmission(dev);
}
-/* Synthetic PU workaround */
-static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel)
-{
- struct b43_phy *phy = &dev->phy;
-
- might_sleep();
-
- if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) {
- /* We do not need the workaround. */
- return;
- }
-
- if (channel <= 10) {
- b43_write16(dev, B43_MMIO_CHANNEL,
- channel2freq_bg(channel + 4));
- } else {
- b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1));
- }
- msleep(1);
- b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
-}
-
-u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel)
-{
- struct b43_phy *phy = &dev->phy;
- u8 ret = 0;
- u16 saved, rssi, temp;
- int i, j = 0;
-
- saved = b43_phy_read(dev, 0x0403);
- b43_radio_selectchannel(dev, channel, 0);
- b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5);
- if (phy->aci_hw_rssi)
- rssi = b43_phy_read(dev, 0x048A) & 0x3F;
- else
- rssi = saved & 0x3F;
- /* clamp temp to signed 5bit */
- if (rssi > 32)
- rssi -= 64;
- for (i = 0; i < 100; i++) {
- temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F;
- if (temp > 32)
- temp -= 64;
- if (temp < rssi)
- j++;
- if (j >= 20)
- ret = 1;
- }
- b43_phy_write(dev, 0x0403, saved);
-
- return ret;
-}
-
-u8 b43_radio_aci_scan(struct b43_wldev * dev)
-{
- struct b43_phy *phy = &dev->phy;
- u8 ret[13];
- unsigned int channel = phy->channel;
- unsigned int i, j, start, end;
-
- if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0)))
- return 0;
-
- b43_phy_lock(dev);
- b43_radio_lock(dev);
- b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC);
- b43_phy_write(dev, B43_PHY_G_CRS,
- b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF);
- b43_set_all_gains(dev, 3, 8, 1);
-
- start = (channel - 5 > 0) ? channel - 5 : 1;
- end = (channel + 5 < 14) ? channel + 5 : 13;
-
- for (i = start; i <= end; i++) {
- if (abs(channel - i) > 2)
- ret[i - 1] = b43_radio_aci_detect(dev, i);
- }
- b43_radio_selectchannel(dev, channel, 0);
- b43_phy_write(dev, 0x0802,
- (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003);
- b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8);
- b43_phy_write(dev, B43_PHY_G_CRS,
- b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000);
- b43_set_original_gains(dev);
- for (i = 0; i < 13; i++) {
- if (!ret[i])
- continue;
- end = (i + 5 < 13) ? i + 5 : 13;
- for (j = i; j < end; j++)
- ret[j] = 1;
- }
- b43_radio_unlock(dev);
- b43_phy_unlock(dev);
-
- return ret[channel - 1];
-}
-
/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val)
{
b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset);
- mmiowb();
b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val);
}
@@ -2267,17 +417,17 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
void b43_nrssi_mem_update(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
s16 i, delta;
s32 tmp;
- delta = 0x1F - phy->nrssi[0];
+ delta = 0x1F - gphy->nrssi[0];
for (i = 0; i < 64; i++) {
- tmp = (i - delta) * phy->nrssislope;
+ tmp = (i - delta) * gphy->nrssislope;
tmp /= 0x10000;
tmp += 0x3A;
tmp = clamp_val(tmp, 0, 0x3F);
- phy->nrssi_lt[i] = tmp;
+ gphy->nrssi_lt[i] = tmp;
}
}
@@ -2442,347 +592,230 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev)
void b43_calc_nrssi_slope(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
u16 backup[18] = { 0 };
u16 tmp;
s16 nrssi0, nrssi1;
- switch (phy->type) {
- case B43_PHYTYPE_B:
- backup[0] = b43_radio_read16(dev, 0x007A);
- backup[1] = b43_radio_read16(dev, 0x0052);
- backup[2] = b43_radio_read16(dev, 0x0043);
- backup[3] = b43_phy_read(dev, 0x0030);
- backup[4] = b43_phy_read(dev, 0x0026);
- backup[5] = b43_phy_read(dev, 0x0015);
- backup[6] = b43_phy_read(dev, 0x002A);
- backup[7] = b43_phy_read(dev, 0x0020);
- backup[8] = b43_phy_read(dev, 0x005A);
- backup[9] = b43_phy_read(dev, 0x0059);
- backup[10] = b43_phy_read(dev, 0x0058);
- backup[11] = b43_read16(dev, 0x03E2);
- backup[12] = b43_read16(dev, 0x03E6);
- backup[13] = b43_read16(dev, B43_MMIO_CHANNEL_EXT);
-
- tmp = b43_radio_read16(dev, 0x007A);
- tmp &= (phy->rev >= 5) ? 0x007F : 0x000F;
- b43_radio_write16(dev, 0x007A, tmp);
- b43_phy_write(dev, 0x0030, 0x00FF);
- b43_write16(dev, 0x03EC, 0x7F7F);
- b43_phy_write(dev, 0x0026, 0x0000);
- b43_phy_write(dev, 0x0015, b43_phy_read(dev, 0x0015) | 0x0020);
- b43_phy_write(dev, 0x002A, 0x08A3);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0080);
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
- nrssi0 = (s16) b43_phy_read(dev, 0x0027);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) & 0x007F);
- if (phy->rev >= 2) {
- b43_write16(dev, 0x03E6, 0x0040);
- } else if (phy->rev == 0) {
- b43_write16(dev, 0x03E6, 0x0122);
- } else {
- b43_write16(dev, B43_MMIO_CHANNEL_EXT,
- b43_read16(dev,
- B43_MMIO_CHANNEL_EXT) & 0x2000);
- }
- b43_phy_write(dev, 0x0020, 0x3F3F);
- b43_phy_write(dev, 0x0015, 0xF330);
- b43_radio_write16(dev, 0x005A, 0x0060);
- b43_radio_write16(dev, 0x0043,
- b43_radio_read16(dev, 0x0043) & 0x00F0);
- b43_phy_write(dev, 0x005A, 0x0480);
- b43_phy_write(dev, 0x0059, 0x0810);
- b43_phy_write(dev, 0x0058, 0x000D);
- udelay(20);
-
- nrssi1 = (s16) b43_phy_read(dev, 0x0027);
- b43_phy_write(dev, 0x0030, backup[3]);
- b43_radio_write16(dev, 0x007A, backup[0]);
- b43_write16(dev, 0x03E2, backup[11]);
- b43_phy_write(dev, 0x0026, backup[4]);
- b43_phy_write(dev, 0x0015, backup[5]);
- b43_phy_write(dev, 0x002A, backup[6]);
- b43_synth_pu_workaround(dev, phy->channel);
- if (phy->rev != 0)
- b43_write16(dev, 0x03F4, backup[13]);
-
- b43_phy_write(dev, 0x0020, backup[7]);
- b43_phy_write(dev, 0x005A, backup[8]);
- b43_phy_write(dev, 0x0059, backup[9]);
- b43_phy_write(dev, 0x0058, backup[10]);
- b43_radio_write16(dev, 0x0052, backup[1]);
- b43_radio_write16(dev, 0x0043, backup[2]);
-
- if (nrssi0 == nrssi1)
- phy->nrssislope = 0x00010000;
- else
- phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1);
-
- if (nrssi0 <= -4) {
- phy->nrssi[0] = nrssi0;
- phy->nrssi[1] = nrssi1;
- }
- break;
- case B43_PHYTYPE_G:
- if (phy->radio_rev >= 9)
- return;
- if (phy->radio_rev == 8)
- b43_calc_nrssi_offset(dev);
+ if (phy->radio_rev >= 9)
+ return;
+ if (phy->radio_rev == 8)
+ b43_calc_nrssi_offset(dev);
- b43_phy_write(dev, B43_PHY_G_CRS,
- b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF);
- b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC);
- backup[7] = b43_read16(dev, 0x03E2);
- b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000);
- backup[0] = b43_radio_read16(dev, 0x007A);
- backup[1] = b43_radio_read16(dev, 0x0052);
- backup[2] = b43_radio_read16(dev, 0x0043);
- backup[3] = b43_phy_read(dev, 0x0015);
- backup[4] = b43_phy_read(dev, 0x005A);
- backup[5] = b43_phy_read(dev, 0x0059);
- backup[6] = b43_phy_read(dev, 0x0058);
- backup[8] = b43_read16(dev, 0x03E6);
- backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT);
- if (phy->rev >= 3) {
- backup[10] = b43_phy_read(dev, 0x002E);
- backup[11] = b43_phy_read(dev, 0x002F);
- backup[12] = b43_phy_read(dev, 0x080F);
- backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL);
- backup[14] = b43_phy_read(dev, 0x0801);
- backup[15] = b43_phy_read(dev, 0x0060);
- backup[16] = b43_phy_read(dev, 0x0014);
- backup[17] = b43_phy_read(dev, 0x0478);
- b43_phy_write(dev, 0x002E, 0);
- b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0);
- switch (phy->rev) {
- case 4:
- case 6:
- case 7:
- b43_phy_write(dev, 0x0478,
- b43_phy_read(dev, 0x0478)
- | 0x0100);
- b43_phy_write(dev, 0x0801,
- b43_phy_read(dev, 0x0801)
- | 0x0040);
- break;
- case 3:
- case 5:
- b43_phy_write(dev, 0x0801,
- b43_phy_read(dev, 0x0801)
- & 0xFFBF);
- break;
- }
- b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060)
+ b43_phy_write(dev, B43_PHY_G_CRS,
+ b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF);
+ b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC);
+ backup[7] = b43_read16(dev, 0x03E2);
+ b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000);
+ backup[0] = b43_radio_read16(dev, 0x007A);
+ backup[1] = b43_radio_read16(dev, 0x0052);
+ backup[2] = b43_radio_read16(dev, 0x0043);
+ backup[3] = b43_phy_read(dev, 0x0015);
+ backup[4] = b43_phy_read(dev, 0x005A);
+ backup[5] = b43_phy_read(dev, 0x0059);
+ backup[6] = b43_phy_read(dev, 0x0058);
+ backup[8] = b43_read16(dev, 0x03E6);
+ backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT);
+ if (phy->rev >= 3) {
+ backup[10] = b43_phy_read(dev, 0x002E);
+ backup[11] = b43_phy_read(dev, 0x002F);
+ backup[12] = b43_phy_read(dev, 0x080F);
+ backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL);
+ backup[14] = b43_phy_read(dev, 0x0801);
+ backup[15] = b43_phy_read(dev, 0x0060);
+ backup[16] = b43_phy_read(dev, 0x0014);
+ backup[17] = b43_phy_read(dev, 0x0478);
+ b43_phy_write(dev, 0x002E, 0);
+ b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0);
+ switch (phy->rev) {
+ case 4:
+ case 6:
+ case 7:
+ b43_phy_write(dev, 0x0478,
+ b43_phy_read(dev, 0x0478)
+ | 0x0100);
+ b43_phy_write(dev, 0x0801,
+ b43_phy_read(dev, 0x0801)
| 0x0040);
- b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014)
- | 0x0200);
- }
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0070);
- b43_set_all_gains(dev, 0, 8, 0);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) & 0x00F7);
- if (phy->rev >= 2) {
- b43_phy_write(dev, 0x0811,
- (b43_phy_read(dev, 0x0811) & 0xFFCF) |
- 0x0030);
- b43_phy_write(dev, 0x0812,
- (b43_phy_read(dev, 0x0812) & 0xFFCF) |
- 0x0010);
+ break;
+ case 3:
+ case 5:
+ b43_phy_write(dev, 0x0801,
+ b43_phy_read(dev, 0x0801)
+ & 0xFFBF);
+ break;
}
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0080);
- udelay(20);
+ b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060)
+ | 0x0040);
+ b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014)
+ | 0x0200);
+ }
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) | 0x0070);
+ b43_set_all_gains(dev, 0, 8, 0);
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) & 0x00F7);
+ if (phy->rev >= 2) {
+ b43_phy_write(dev, 0x0811,
+ (b43_phy_read(dev, 0x0811) & 0xFFCF) |
+ 0x0030);
+ b43_phy_write(dev, 0x0812,
+ (b43_phy_read(dev, 0x0812) & 0xFFCF) |
+ 0x0010);
+ }
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) | 0x0080);
+ udelay(20);
- nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
- if (nrssi0 >= 0x0020)
- nrssi0 -= 0x0040;
+ nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
+ if (nrssi0 >= 0x0020)
+ nrssi0 -= 0x0040;
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) & 0x007F);
- if (phy->rev >= 2) {
- b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003)
- & 0xFF9F) | 0x0040);
- }
-
- b43_write16(dev, B43_MMIO_CHANNEL_EXT,
- b43_read16(dev, B43_MMIO_CHANNEL_EXT)
- | 0x2000);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x000F);
- b43_phy_write(dev, 0x0015, 0xF330);
- if (phy->rev >= 2) {
- b43_phy_write(dev, 0x0812,
- (b43_phy_read(dev, 0x0812) & 0xFFCF) |
- 0x0020);
- b43_phy_write(dev, 0x0811,
- (b43_phy_read(dev, 0x0811) & 0xFFCF) |
- 0x0020);
- }
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) & 0x007F);
+ if (phy->rev >= 2) {
+ b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003)
+ & 0xFF9F) | 0x0040);
+ }
- b43_set_all_gains(dev, 3, 0, 1);
- if (phy->radio_rev == 8) {
- b43_radio_write16(dev, 0x0043, 0x001F);
- } else {
- tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F;
- b43_radio_write16(dev, 0x0052, tmp | 0x0060);
- tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0;
- b43_radio_write16(dev, 0x0043, tmp | 0x0009);
- }
- b43_phy_write(dev, 0x005A, 0x0480);
- b43_phy_write(dev, 0x0059, 0x0810);
- b43_phy_write(dev, 0x0058, 0x000D);
- udelay(20);
- nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
- if (nrssi1 >= 0x0020)
- nrssi1 -= 0x0040;
- if (nrssi0 == nrssi1)
- phy->nrssislope = 0x00010000;
- else
- phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1);
- if (nrssi0 >= -4) {
- phy->nrssi[0] = nrssi1;
- phy->nrssi[1] = nrssi0;
- }
- if (phy->rev >= 3) {
- b43_phy_write(dev, 0x002E, backup[10]);
- b43_phy_write(dev, 0x002F, backup[11]);
- b43_phy_write(dev, 0x080F, backup[12]);
- b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]);
- }
- if (phy->rev >= 2) {
- b43_phy_write(dev, 0x0812,
- b43_phy_read(dev, 0x0812) & 0xFFCF);
- b43_phy_write(dev, 0x0811,
- b43_phy_read(dev, 0x0811) & 0xFFCF);
- }
+ b43_write16(dev, B43_MMIO_CHANNEL_EXT,
+ b43_read16(dev, B43_MMIO_CHANNEL_EXT)
+ | 0x2000);
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) | 0x000F);
+ b43_phy_write(dev, 0x0015, 0xF330);
+ if (phy->rev >= 2) {
+ b43_phy_write(dev, 0x0812,
+ (b43_phy_read(dev, 0x0812) & 0xFFCF) |
+ 0x0020);
+ b43_phy_write(dev, 0x0811,
+ (b43_phy_read(dev, 0x0811) & 0xFFCF) |
+ 0x0020);
+ }
- b43_radio_write16(dev, 0x007A, backup[0]);
- b43_radio_write16(dev, 0x0052, backup[1]);
- b43_radio_write16(dev, 0x0043, backup[2]);
- b43_write16(dev, 0x03E2, backup[7]);
- b43_write16(dev, 0x03E6, backup[8]);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]);
- b43_phy_write(dev, 0x0015, backup[3]);
- b43_phy_write(dev, 0x005A, backup[4]);
- b43_phy_write(dev, 0x0059, backup[5]);
- b43_phy_write(dev, 0x0058, backup[6]);
- b43_synth_pu_workaround(dev, phy->channel);
- b43_phy_write(dev, 0x0802,
- b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002));
- b43_set_original_gains(dev);
- b43_phy_write(dev, B43_PHY_G_CRS,
- b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000);
- if (phy->rev >= 3) {
- b43_phy_write(dev, 0x0801, backup[14]);
- b43_phy_write(dev, 0x0060, backup[15]);
- b43_phy_write(dev, 0x0014, backup[16]);
- b43_phy_write(dev, 0x0478, backup[17]);
- }
- b43_nrssi_mem_update(dev);
- b43_calc_nrssi_threshold(dev);
- break;
- default:
- B43_WARN_ON(1);
+ b43_set_all_gains(dev, 3, 0, 1);
+ if (phy->radio_rev == 8) {
+ b43_radio_write16(dev, 0x0043, 0x001F);
+ } else {
+ tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F;
+ b43_radio_write16(dev, 0x0052, tmp | 0x0060);
+ tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0;
+ b43_radio_write16(dev, 0x0043, tmp | 0x0009);
+ }
+ b43_phy_write(dev, 0x005A, 0x0480);
+ b43_phy_write(dev, 0x0059, 0x0810);
+ b43_phy_write(dev, 0x0058, 0x000D);
+ udelay(20);
+ nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
+ if (nrssi1 >= 0x0020)
+ nrssi1 -= 0x0040;
+ if (nrssi0 == nrssi1)
+ gphy->nrssislope = 0x00010000;
+ else
+ gphy->nrssislope = 0x00400000 / (nrssi0 - nrssi1);
+ if (nrssi0 >= -4) {
+ gphy->nrssi[0] = nrssi1;
+ gphy->nrssi[1] = nrssi0;
+ }
+ if (phy->rev >= 3) {
+ b43_phy_write(dev, 0x002E, backup[10]);
+ b43_phy_write(dev, 0x002F, backup[11]);
+ b43_phy_write(dev, 0x080F, backup[12]);
+ b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]);
}
+ if (phy->rev >= 2) {
+ b43_phy_write(dev, 0x0812,
+ b43_phy_read(dev, 0x0812) & 0xFFCF);
+ b43_phy_write(dev, 0x0811,
+ b43_phy_read(dev, 0x0811) & 0xFFCF);
+ }
+
+ b43_radio_write16(dev, 0x007A, backup[0]);
+ b43_radio_write16(dev, 0x0052, backup[1]);
+ b43_radio_write16(dev, 0x0043, backup[2]);
+ b43_write16(dev, 0x03E2, backup[7]);
+ b43_write16(dev, 0x03E6, backup[8]);
+ b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]);
+ b43_phy_write(dev, 0x0015, backup[3]);
+ b43_phy_write(dev, 0x005A, backup[4]);
+ b43_phy_write(dev, 0x0059, backup[5]);
+ b43_phy_write(dev, 0x0058, backup[6]);
+ b43_synth_pu_workaround(dev, phy->channel);
+ b43_phy_write(dev, 0x0802,
+ b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002));
+ b43_set_original_gains(dev);
+ b43_phy_write(dev, B43_PHY_G_CRS,
+ b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000);
+ if (phy->rev >= 3) {
+ b43_phy_write(dev, 0x0801, backup[14]);
+ b43_phy_write(dev, 0x0060, backup[15]);
+ b43_phy_write(dev, 0x0014, backup[16]);
+ b43_phy_write(dev, 0x0478, backup[17]);
+ }
+ b43_nrssi_mem_update(dev);
+ b43_calc_nrssi_threshold(dev);
}
-void b43_calc_nrssi_threshold(struct b43_wldev *dev)
+static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- s32 threshold;
+ struct b43_phy_g *gphy = phy->g;
s32 a, b;
s16 tmp16;
u16 tmp_u16;
- switch (phy->type) {
- case B43_PHYTYPE_B:{
- if (phy->radio_ver != 0x2050)
- return;
- if (!
- (dev->dev->bus->sprom.
- boardflags_lo & B43_BFL_RSSI))
- return;
-
- if (phy->radio_rev >= 6) {
- threshold =
- (phy->nrssi[1] - phy->nrssi[0]) * 32;
- threshold += 20 * (phy->nrssi[0] + 1);
- threshold /= 40;
- } else
- threshold = phy->nrssi[1] - 5;
-
- threshold = clamp_val(threshold, 0, 0x3E);
- b43_phy_read(dev, 0x0020); /* dummy read */
- b43_phy_write(dev, 0x0020,
- (((u16) threshold) << 8) | 0x001C);
-
- if (phy->radio_rev >= 6) {
- b43_phy_write(dev, 0x0087, 0x0E0D);
- b43_phy_write(dev, 0x0086, 0x0C0B);
- b43_phy_write(dev, 0x0085, 0x0A09);
- b43_phy_write(dev, 0x0084, 0x0808);
- b43_phy_write(dev, 0x0083, 0x0808);
- b43_phy_write(dev, 0x0082, 0x0604);
- b43_phy_write(dev, 0x0081, 0x0302);
- b43_phy_write(dev, 0x0080, 0x0100);
- }
- break;
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+
+ if (!phy->gmode ||
+ !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+ tmp16 = b43_nrssi_hw_read(dev, 0x20);
+ if (tmp16 >= 0x20)
+ tmp16 -= 0x40;
+ if (tmp16 < 3) {
+ b43_phy_write(dev, 0x048A,
+ (b43_phy_read(dev, 0x048A)
+ & 0xF000) | 0x09EB);
+ } else {
+ b43_phy_write(dev, 0x048A,
+ (b43_phy_read(dev, 0x048A)
+ & 0xF000) | 0x0AED);
}
- case B43_PHYTYPE_G:
- if (!phy->gmode ||
- !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
- tmp16 = b43_nrssi_hw_read(dev, 0x20);
- if (tmp16 >= 0x20)
- tmp16 -= 0x40;
- if (tmp16 < 3) {
- b43_phy_write(dev, 0x048A,
- (b43_phy_read(dev, 0x048A)
- & 0xF000) | 0x09EB);
- } else {
- b43_phy_write(dev, 0x048A,
- (b43_phy_read(dev, 0x048A)
- & 0xF000) | 0x0AED);
- }
+ } else {
+ if (gphy->interfmode == B43_INTERFMODE_NONWLAN) {
+ a = 0xE;
+ b = 0xA;
+ } else if (!gphy->aci_wlan_automatic && gphy->aci_enable) {
+ a = 0x13;
+ b = 0x12;
} else {
- if (phy->interfmode == B43_INTERFMODE_NONWLAN) {
- a = 0xE;
- b = 0xA;
- } else if (!phy->aci_wlan_automatic && phy->aci_enable) {
- a = 0x13;
- b = 0x12;
- } else {
- a = 0xE;
- b = 0x11;
- }
-
- a = a * (phy->nrssi[1] - phy->nrssi[0]);
- a += (phy->nrssi[0] << 6);
- if (a < 32)
- a += 31;
- else
- a += 32;
- a = a >> 6;
- a = clamp_val(a, -31, 31);
-
- b = b * (phy->nrssi[1] - phy->nrssi[0]);
- b += (phy->nrssi[0] << 6);
- if (b < 32)
- b += 31;
- else
- b += 32;
- b = b >> 6;
- b = clamp_val(b, -31, 31);
-
- tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000;
- tmp_u16 |= ((u32) b & 0x0000003F);
- tmp_u16 |= (((u32) a & 0x0000003F) << 6);
- b43_phy_write(dev, 0x048A, tmp_u16);
+ a = 0xE;
+ b = 0x11;
}
- break;
- default:
- B43_WARN_ON(1);
+
+ a = a * (gphy->nrssi[1] - gphy->nrssi[0]);
+ a += (gphy->nrssi[0] << 6);
+ if (a < 32)
+ a += 31;
+ else
+ a += 32;
+ a = a >> 6;
+ a = clamp_val(a, -31, 31);
+
+ b = b * (gphy->nrssi[1] - gphy->nrssi[0]);
+ b += (gphy->nrssi[0] << 6);
+ if (b < 32)
+ b += 31;
+ else
+ b += 32;
+ b = b >> 6;
+ b = clamp_val(b, -31, 31);
+
+ tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000;
+ tmp_u16 |= ((u32) b & 0x0000003F);
+ tmp_u16 |= (((u32) a & 0x0000003F) << 6);
+ b43_phy_write(dev, 0x048A, tmp_u16);
}
}
@@ -2860,9 +893,10 @@ static void
b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
u16 tmp, flipped;
size_t stackidx = 0;
- u32 *stack = phy->interfstack;
+ u32 *stack = gphy->interfstack;
switch (mode) {
case B43_INTERFMODE_NONWLAN:
@@ -2928,7 +962,7 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode)
if (b43_phy_read(dev, 0x0033) & 0x0800)
break;
- phy->aci_enable = 1;
+ gphy->aci_enable = 1;
phy_stacksave(B43_PHY_RADIO_BITFIELD);
phy_stacksave(B43_PHY_G_CRS);
@@ -3064,7 +1098,8 @@ static void
b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode)
{
struct b43_phy *phy = &dev->phy;
- u32 *stack = phy->interfstack;
+ struct b43_phy_g *gphy = phy->g;
+ u32 *stack = gphy->interfstack;
switch (mode) {
case B43_INTERFMODE_NONWLAN:
@@ -3103,7 +1138,7 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode)
if (!(b43_phy_read(dev, 0x0033) & 0x0800))
break;
- phy->aci_enable = 0;
+ gphy->aci_enable = 0;
phy_stackrestore(B43_PHY_RADIO_BITFIELD);
phy_stackrestore(B43_PHY_G_CRS);
@@ -3153,47 +1188,6 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode)
#undef ofdmtab_stacksave
#undef ofdmtab_stackrestore
-int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode)
-{
- struct b43_phy *phy = &dev->phy;
- int currentmode;
-
- if ((phy->type != B43_PHYTYPE_G) || (phy->rev == 0) || (!phy->gmode))
- return -ENODEV;
-
- phy->aci_wlan_automatic = 0;
- switch (mode) {
- case B43_INTERFMODE_AUTOWLAN:
- phy->aci_wlan_automatic = 1;
- if (phy->aci_enable)
- mode = B43_INTERFMODE_MANUALWLAN;
- else
- mode = B43_INTERFMODE_NONE;
- break;
- case B43_INTERFMODE_NONE:
- case B43_INTERFMODE_NONWLAN:
- case B43_INTERFMODE_MANUALWLAN:
- break;
- default:
- return -EINVAL;
- }
-
- currentmode = phy->interfmode;
- if (currentmode == mode)
- return 0;
- if (currentmode != B43_INTERFMODE_NONE)
- b43_radio_interference_mitigation_disable(dev, currentmode);
-
- if (mode == B43_INTERFMODE_NONE) {
- phy->aci_enable = 0;
- phy->aci_hw_rssi = 0;
- } else
- b43_radio_interference_mitigation_enable(dev, mode);
- phy->interfmode = mode;
-
- return 0;
-}
-
static u16 b43_radio_core_calibration_value(struct b43_wldev *dev)
{
u16 reg, index, ret;
@@ -3219,13 +1213,14 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
u16 phy_register, unsigned int lpd)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
struct ssb_sprom *sprom = &(dev->dev->bus->sprom);
if (!phy->gmode)
return 0;
if (has_loopback_gain(phy)) {
- int max_lb_gain = phy->max_lb_gain;
+ int max_lb_gain = gphy->max_lb_gain;
u16 extlna;
u16 i;
@@ -3606,301 +1601,1682 @@ u16 b43_radio_init2050(struct b43_wldev *dev)
return ret;
}
-void b43_radio_init2060(struct b43_wldev *dev)
+static void b43_phy_initb5(struct b43_wldev *dev)
{
- int err;
+ struct ssb_bus *bus = dev->dev->bus;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ u16 offset, value;
+ u8 old_channel;
- b43_radio_write16(dev, 0x0004, 0x00C0);
- b43_radio_write16(dev, 0x0005, 0x0008);
- b43_radio_write16(dev, 0x0009, 0x0040);
- b43_radio_write16(dev, 0x0005, 0x00AA);
- b43_radio_write16(dev, 0x0032, 0x008F);
- b43_radio_write16(dev, 0x0006, 0x008F);
- b43_radio_write16(dev, 0x0034, 0x008F);
- b43_radio_write16(dev, 0x002C, 0x0007);
- b43_radio_write16(dev, 0x0082, 0x0080);
- b43_radio_write16(dev, 0x0080, 0x0000);
- b43_radio_write16(dev, 0x003F, 0x00DA);
- b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008);
- b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010);
- b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020);
- b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020);
- msleep(1); /* delay 400usec */
-
- b43_radio_write16(dev, 0x0081,
- (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010);
- msleep(1); /* delay 400usec */
-
- b43_radio_write16(dev, 0x0005,
- (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008);
- b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010);
- b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008);
- b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040);
- b43_radio_write16(dev, 0x0081,
- (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040);
- b43_radio_write16(dev, 0x0005,
- (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008);
- b43_phy_write(dev, 0x0063, 0xDDC6);
- b43_phy_write(dev, 0x0069, 0x07BE);
- b43_phy_write(dev, 0x006A, 0x0000);
-
- err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_A, 0);
- B43_WARN_ON(err);
+ if (phy->analog == 1) {
+ b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A)
+ | 0x0050);
+ }
+ if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type != SSB_BOARD_BU4306)) {
+ value = 0x2120;
+ for (offset = 0x00A8; offset < 0x00C7; offset++) {
+ b43_phy_write(dev, offset, value);
+ value += 0x202;
+ }
+ }
+ b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF)
+ | 0x0700);
+ if (phy->radio_ver == 0x2050)
+ b43_phy_write(dev, 0x0038, 0x0667);
- msleep(1);
+ if (phy->gmode || phy->rev >= 2) {
+ if (phy->radio_ver == 0x2050) {
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A)
+ | 0x0020);
+ b43_radio_write16(dev, 0x0051,
+ b43_radio_read16(dev, 0x0051)
+ | 0x0004);
+ }
+ b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000);
+
+ b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100);
+ b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000);
+
+ b43_phy_write(dev, 0x001C, 0x186A);
+
+ b43_phy_write(dev, 0x0013,
+ (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900);
+ b43_phy_write(dev, 0x0035,
+ (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064);
+ b43_phy_write(dev, 0x005D,
+ (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A);
+ }
+
+ if (dev->bad_frames_preempt) {
+ b43_phy_write(dev, B43_PHY_RADIO_BITFIELD,
+ b43_phy_read(dev,
+ B43_PHY_RADIO_BITFIELD) | (1 << 11));
+ }
+
+ if (phy->analog == 1) {
+ b43_phy_write(dev, 0x0026, 0xCE00);
+ b43_phy_write(dev, 0x0021, 0x3763);
+ b43_phy_write(dev, 0x0022, 0x1BC3);
+ b43_phy_write(dev, 0x0023, 0x06F9);
+ b43_phy_write(dev, 0x0024, 0x037E);
+ } else
+ b43_phy_write(dev, 0x0026, 0xCC00);
+ b43_phy_write(dev, 0x0030, 0x00C6);
+ b43_write16(dev, 0x03EC, 0x3F22);
+
+ if (phy->analog == 1)
+ b43_phy_write(dev, 0x0020, 0x3E1C);
+ else
+ b43_phy_write(dev, 0x0020, 0x301C);
+
+ if (phy->analog == 0)
+ b43_write16(dev, 0x03E4, 0x3000);
+
+ old_channel = phy->channel;
+ /* Force to channel 7, even if not supported. */
+ b43_gphy_channel_switch(dev, 7, 0);
+
+ if (phy->radio_ver != 0x2050) {
+ b43_radio_write16(dev, 0x0075, 0x0080);
+ b43_radio_write16(dev, 0x0079, 0x0081);
+ }
+
+ b43_radio_write16(dev, 0x0050, 0x0020);
+ b43_radio_write16(dev, 0x0050, 0x0023);
+
+ if (phy->radio_ver == 0x2050) {
+ b43_radio_write16(dev, 0x0050, 0x0020);
+ b43_radio_write16(dev, 0x005A, 0x0070);
+ }
+
+ b43_radio_write16(dev, 0x005B, 0x007B);
+ b43_radio_write16(dev, 0x005C, 0x00B0);
+
+ b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007);
+
+ b43_gphy_channel_switch(dev, old_channel, 0);
+
+ b43_phy_write(dev, 0x0014, 0x0080);
+ b43_phy_write(dev, 0x0032, 0x00CA);
+ b43_phy_write(dev, 0x002A, 0x88A3);
+
+ b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control);
+
+ if (phy->radio_ver == 0x2050)
+ b43_radio_write16(dev, 0x005D, 0x000D);
+
+ b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004);
}
-static inline u16 freq_r3A_value(u16 frequency)
+static void b43_phy_initb6(struct b43_wldev *dev)
{
- u16 value;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ u16 offset, val;
+ u8 old_channel;
+
+ b43_phy_write(dev, 0x003E, 0x817A);
+ b43_radio_write16(dev, 0x007A,
+ (b43_radio_read16(dev, 0x007A) | 0x0058));
+ if (phy->radio_rev == 4 || phy->radio_rev == 5) {
+ b43_radio_write16(dev, 0x51, 0x37);
+ b43_radio_write16(dev, 0x52, 0x70);
+ b43_radio_write16(dev, 0x53, 0xB3);
+ b43_radio_write16(dev, 0x54, 0x9B);
+ b43_radio_write16(dev, 0x5A, 0x88);
+ b43_radio_write16(dev, 0x5B, 0x88);
+ b43_radio_write16(dev, 0x5D, 0x88);
+ b43_radio_write16(dev, 0x5E, 0x88);
+ b43_radio_write16(dev, 0x7D, 0x88);
+ b43_hf_write(dev, b43_hf_read(dev)
+ | B43_HF_TSSIRPSMW);
+ }
+ B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */
+ if (phy->radio_rev == 8) {
+ b43_radio_write16(dev, 0x51, 0);
+ b43_radio_write16(dev, 0x52, 0x40);
+ b43_radio_write16(dev, 0x53, 0xB7);
+ b43_radio_write16(dev, 0x54, 0x98);
+ b43_radio_write16(dev, 0x5A, 0x88);
+ b43_radio_write16(dev, 0x5B, 0x6B);
+ b43_radio_write16(dev, 0x5C, 0x0F);
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
+ b43_radio_write16(dev, 0x5D, 0xFA);
+ b43_radio_write16(dev, 0x5E, 0xD8);
+ } else {
+ b43_radio_write16(dev, 0x5D, 0xF5);
+ b43_radio_write16(dev, 0x5E, 0xB8);
+ }
+ b43_radio_write16(dev, 0x0073, 0x0003);
+ b43_radio_write16(dev, 0x007D, 0x00A8);
+ b43_radio_write16(dev, 0x007C, 0x0001);
+ b43_radio_write16(dev, 0x007E, 0x0008);
+ }
+ val = 0x1E1F;
+ for (offset = 0x0088; offset < 0x0098; offset++) {
+ b43_phy_write(dev, offset, val);
+ val -= 0x0202;
+ }
+ val = 0x3E3F;
+ for (offset = 0x0098; offset < 0x00A8; offset++) {
+ b43_phy_write(dev, offset, val);
+ val -= 0x0202;
+ }
+ val = 0x2120;
+ for (offset = 0x00A8; offset < 0x00C8; offset++) {
+ b43_phy_write(dev, offset, (val & 0x3F3F));
+ val += 0x0202;
+ }
+ if (phy->type == B43_PHYTYPE_G) {
+ b43_radio_write16(dev, 0x007A,
+ b43_radio_read16(dev, 0x007A) | 0x0020);
+ b43_radio_write16(dev, 0x0051,
+ b43_radio_read16(dev, 0x0051) | 0x0004);
+ b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100);
+ b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000);
+ b43_phy_write(dev, 0x5B, 0);
+ b43_phy_write(dev, 0x5C, 0);
+ }
+
+ old_channel = phy->channel;
+ if (old_channel >= 8)
+ b43_gphy_channel_switch(dev, 1, 0);
+ else
+ b43_gphy_channel_switch(dev, 13, 0);
+
+ b43_radio_write16(dev, 0x0050, 0x0020);
+ b43_radio_write16(dev, 0x0050, 0x0023);
+ udelay(40);
+ if (phy->radio_rev < 6 || phy->radio_rev == 8) {
+ b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C)
+ | 0x0002));
+ b43_radio_write16(dev, 0x50, 0x20);
+ }
+ if (phy->radio_rev <= 2) {
+ b43_radio_write16(dev, 0x7C, 0x20);
+ b43_radio_write16(dev, 0x5A, 0x70);
+ b43_radio_write16(dev, 0x5B, 0x7B);
+ b43_radio_write16(dev, 0x5C, 0xB0);
+ }
+ b43_radio_write16(dev, 0x007A,
+ (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007);
+
+ b43_gphy_channel_switch(dev, old_channel, 0);
- if (frequency < 5091)
- value = 0x0040;
- else if (frequency < 5321)
- value = 0x0000;
- else if (frequency < 5806)
- value = 0x0080;
+ b43_phy_write(dev, 0x0014, 0x0200);
+ if (phy->radio_rev >= 6)
+ b43_phy_write(dev, 0x2A, 0x88C2);
else
- value = 0x0040;
+ b43_phy_write(dev, 0x2A, 0x8AC0);
+ b43_phy_write(dev, 0x0038, 0x0668);
+ b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control);
+ if (phy->radio_rev <= 5) {
+ b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D)
+ & 0xFF80) | 0x0003);
+ }
+ if (phy->radio_rev <= 2)
+ b43_radio_write16(dev, 0x005D, 0x000D);
- return value;
+ if (phy->analog == 4) {
+ b43_write16(dev, 0x3E4, 9);
+ b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61)
+ & 0x0FFF);
+ } else {
+ b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0)
+ | 0x0004);
+ }
+ if (phy->type == B43_PHYTYPE_B)
+ B43_WARN_ON(1);
+ else if (phy->type == B43_PHYTYPE_G)
+ b43_write16(dev, 0x03E6, 0x0);
}
-void b43_radio_set_tx_iq(struct b43_wldev *dev)
+static void b43_calc_loopback_gain(struct b43_wldev *dev)
{
- static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
- static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A };
- u16 tmp = b43_radio_read16(dev, 0x001E);
- int i, j;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ u16 backup_phy[16] = { 0 };
+ u16 backup_radio[3];
+ u16 backup_bband;
+ u16 i, j, loop_i_max;
+ u16 trsw_rx;
+ u16 loop1_outer_done, loop1_inner_done;
- for (i = 0; i < 5; i++) {
- for (j = 0; j < 5; j++) {
- if (tmp == (data_high[i] << 4 | data_low[j])) {
- b43_phy_write(dev, 0x0069,
- (i - j) << 8 | 0x00C0);
- return;
+ backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0);
+ backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG);
+ backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER);
+ backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL);
+ if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
+ backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER);
+ backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL);
+ }
+ backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A));
+ backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59));
+ backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58));
+ backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A));
+ backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03));
+ backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK);
+ backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL);
+ backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B));
+ backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL);
+ backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE);
+ backup_bband = gphy->bbatt.att;
+ backup_radio[0] = b43_radio_read16(dev, 0x52);
+ backup_radio[1] = b43_radio_read16(dev, 0x43);
+ backup_radio[2] = b43_radio_read16(dev, 0x7A);
+
+ b43_phy_write(dev, B43_PHY_CRS0,
+ b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF);
+ b43_phy_write(dev, B43_PHY_CCKBBANDCFG,
+ b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000);
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD);
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE);
+ if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
+ b43_phy_write(dev, B43_PHY_ANALOGOVER,
+ b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001);
+ b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
+ b43_phy_read(dev,
+ B43_PHY_ANALOGOVERVAL) & 0xFFFE);
+ b43_phy_write(dev, B43_PHY_ANALOGOVER,
+ b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002);
+ b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
+ b43_phy_read(dev,
+ B43_PHY_ANALOGOVERVAL) & 0xFFFD);
+ }
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C);
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ (b43_phy_read(dev, B43_PHY_RFOVERVAL)
+ & 0xFFCF) | 0x10);
+
+ b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780);
+ b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810);
+ b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D);
+
+ b43_phy_write(dev, B43_PHY_CCK(0x0A),
+ b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000);
+ if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
+ b43_phy_write(dev, B43_PHY_ANALOGOVER,
+ b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004);
+ b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
+ b43_phy_read(dev,
+ B43_PHY_ANALOGOVERVAL) & 0xFFFB);
+ }
+ b43_phy_write(dev, B43_PHY_CCK(0x03),
+ (b43_phy_read(dev, B43_PHY_CCK(0x03))
+ & 0xFF9F) | 0x40);
+
+ if (phy->radio_rev == 8) {
+ b43_radio_write16(dev, 0x43, 0x000F);
+ } else {
+ b43_radio_write16(dev, 0x52, 0);
+ b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
+ & 0xFFF0) | 0x9);
+ }
+ b43_gphy_set_baseband_attenuation(dev, 11);
+
+ if (phy->rev >= 3)
+ b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020);
+ else
+ b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020);
+ b43_phy_write(dev, B43_PHY_LO_CTL, 0);
+
+ b43_phy_write(dev, B43_PHY_CCK(0x2B),
+ (b43_phy_read(dev, B43_PHY_CCK(0x2B))
+ & 0xFFC0) | 0x01);
+ b43_phy_write(dev, B43_PHY_CCK(0x2B),
+ (b43_phy_read(dev, B43_PHY_CCK(0x2B))
+ & 0xC0FF) | 0x800);
+
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF);
+
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
+ if (phy->rev >= 7) {
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER)
+ | 0x0800);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL)
+ | 0x8000);
+ }
+ }
+ b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A)
+ & 0x00F7);
+
+ j = 0;
+ loop_i_max = (phy->radio_rev == 8) ? 15 : 9;
+ for (i = 0; i < loop_i_max; i++) {
+ for (j = 0; j < 16; j++) {
+ b43_radio_write16(dev, 0x43, i);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ (b43_phy_read(dev, B43_PHY_RFOVERVAL)
+ & 0xF0FF) | (j << 8));
+ b43_phy_write(dev, B43_PHY_PGACTL,
+ (b43_phy_read(dev, B43_PHY_PGACTL)
+ & 0x0FFF) | 0xA000);
+ b43_phy_write(dev, B43_PHY_PGACTL,
+ b43_phy_read(dev, B43_PHY_PGACTL)
+ | 0xF000);
+ udelay(20);
+ if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC)
+ goto exit_loop1;
+ }
+ }
+ exit_loop1:
+ loop1_outer_done = i;
+ loop1_inner_done = j;
+ if (j >= 8) {
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL)
+ | 0x30);
+ trsw_rx = 0x1B;
+ for (j = j - 8; j < 16; j++) {
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ (b43_phy_read(dev, B43_PHY_RFOVERVAL)
+ & 0xF0FF) | (j << 8));
+ b43_phy_write(dev, B43_PHY_PGACTL,
+ (b43_phy_read(dev, B43_PHY_PGACTL)
+ & 0x0FFF) | 0xA000);
+ b43_phy_write(dev, B43_PHY_PGACTL,
+ b43_phy_read(dev, B43_PHY_PGACTL)
+ | 0xF000);
+ udelay(20);
+ trsw_rx -= 3;
+ if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC)
+ goto exit_loop2;
+ }
+ } else
+ trsw_rx = 0x18;
+ exit_loop2:
+
+ if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */
+ b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]);
+ b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]);
+ }
+ b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]);
+ b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]);
+ b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]);
+ b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]);
+ b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]);
+ b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]);
+ b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]);
+ b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]);
+ b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]);
+
+ b43_gphy_set_baseband_attenuation(dev, backup_bband);
+
+ b43_radio_write16(dev, 0x52, backup_radio[0]);
+ b43_radio_write16(dev, 0x43, backup_radio[1]);
+ b43_radio_write16(dev, 0x7A, backup_radio[2]);
+
+ b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003);
+ udelay(10);
+ b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]);
+ b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]);
+ b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]);
+
+ gphy->max_lb_gain =
+ ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11;
+ gphy->trsw_rx_gain = trsw_rx * 2;
+}
+
+static void b43_hardware_pctl_early_init(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ if (!b43_has_hardware_pctl(dev)) {
+ b43_phy_write(dev, 0x047A, 0xC111);
+ return;
+ }
+
+ b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF);
+ b43_phy_write(dev, 0x002F, 0x0202);
+ b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002);
+ b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000);
+ if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) {
+ b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A)
+ & 0xFF0F) | 0x0010);
+ b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D)
+ | 0x8000);
+ b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E)
+ & 0xFFC0) | 0x0010);
+ b43_phy_write(dev, 0x002E, 0xC07F);
+ b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
+ | 0x0400);
+ } else {
+ b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
+ | 0x0200);
+ b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036)
+ | 0x0400);
+ b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D)
+ & 0x7FFF);
+ b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F)
+ & 0xFFFE);
+ b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E)
+ & 0xFFC0) | 0x0010);
+ b43_phy_write(dev, 0x002E, 0xC07F);
+ b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A)
+ & 0xFF0F) | 0x0010);
+ }
+}
+
+/* Hardware power control for G-PHY */
+static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+
+ if (!b43_has_hardware_pctl(dev)) {
+ /* No hardware power control */
+ b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL);
+ return;
+ }
+
+ b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0)
+ | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi));
+ b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00)
+ | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi));
+ b43_gphy_tssi_power_lt_init(dev);
+ b43_gphy_gain_lt_init(dev);
+ b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF);
+ b43_phy_write(dev, 0x0014, 0x0000);
+
+ B43_WARN_ON(phy->rev < 6);
+ b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478)
+ | 0x0800);
+ b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478)
+ & 0xFEFF);
+ b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801)
+ & 0xFFBF);
+
+ b43_gphy_dc_lt_init(dev, 1);
+
+ /* Enable hardware pctl in firmware. */
+ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
+}
+
+/* Intialize B/G PHY power control */
+static void b43_phy_init_pctl(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_rfatt old_rfatt;
+ struct b43_bbatt old_bbatt;
+ u8 old_tx_control = 0;
+
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+
+ if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+ (bus->boardinfo.type == SSB_BOARD_BU4306))
+ return;
+
+ b43_phy_write(dev, 0x0028, 0x8018);
+
+ /* This does something with the Analog... */
+ b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0)
+ & 0xFFDF);
+
+ if (!phy->gmode)
+ return;
+ b43_hardware_pctl_early_init(dev);
+ if (gphy->cur_idle_tssi == 0) {
+ if (phy->radio_ver == 0x2050 && phy->analog == 0) {
+ b43_radio_write16(dev, 0x0076,
+ (b43_radio_read16(dev, 0x0076)
+ & 0x00F7) | 0x0084);
+ } else {
+ struct b43_rfatt rfatt;
+ struct b43_bbatt bbatt;
+
+ memcpy(&old_rfatt, &gphy->rfatt, sizeof(old_rfatt));
+ memcpy(&old_bbatt, &gphy->bbatt, sizeof(old_bbatt));
+ old_tx_control = gphy->tx_control;
+
+ bbatt.att = 11;
+ if (phy->radio_rev == 8) {
+ rfatt.att = 15;
+ rfatt.with_padmix = 1;
+ } else {
+ rfatt.att = 9;
+ rfatt.with_padmix = 0;
}
+ b43_set_txpower_g(dev, &bbatt, &rfatt, 0);
+ }
+ b43_dummy_transmission(dev);
+ gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI);
+ if (B43_DEBUG) {
+ /* Current-Idle-TSSI sanity check. */
+ if (abs(gphy->cur_idle_tssi - gphy->tgt_idle_tssi) >= 20) {
+ b43dbg(dev->wl,
+ "!WARNING! Idle-TSSI phy->cur_idle_tssi "
+ "measuring failed. (cur=%d, tgt=%d). Disabling TX power "
+ "adjustment.\n", gphy->cur_idle_tssi,
+ gphy->tgt_idle_tssi);
+ gphy->cur_idle_tssi = 0;
+ }
+ }
+ if (phy->radio_ver == 0x2050 && phy->analog == 0) {
+ b43_radio_write16(dev, 0x0076,
+ b43_radio_read16(dev, 0x0076)
+ & 0xFF7B);
+ } else {
+ b43_set_txpower_g(dev, &old_bbatt,
+ &old_rfatt, old_tx_control);
}
}
+ b43_hardware_pctl_init_gphy(dev);
+ b43_shm_clear_tssi(dev);
}
-int b43_radio_selectchannel(struct b43_wldev *dev,
- u8 channel, int synthetic_pu_workaround)
+static void b43_phy_initg(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- u16 r8, tmp;
- u16 freq;
- u16 channelcookie, savedcookie;
- int err = 0;
-
- if (channel == 0xFF) {
- switch (phy->type) {
- case B43_PHYTYPE_A:
- channel = B43_DEFAULT_CHANNEL_A;
- break;
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:
- channel = B43_DEFAULT_CHANNEL_BG;
- break;
- case B43_PHYTYPE_N:
- //FIXME check if we are on 2.4GHz or 5GHz and set a default channel.
- channel = 1;
- break;
- default:
- B43_WARN_ON(1);
+ struct b43_phy_g *gphy = phy->g;
+ u16 tmp;
+
+ if (phy->rev == 1)
+ b43_phy_initb5(dev);
+ else
+ b43_phy_initb6(dev);
+
+ if (phy->rev >= 2 || phy->gmode)
+ b43_phy_inita(dev);
+
+ if (phy->rev >= 2) {
+ b43_phy_write(dev, B43_PHY_ANALOGOVER, 0);
+ b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0);
+ }
+ if (phy->rev == 2) {
+ b43_phy_write(dev, B43_PHY_RFOVER, 0);
+ b43_phy_write(dev, B43_PHY_PGACTL, 0xC0);
+ }
+ if (phy->rev > 5) {
+ b43_phy_write(dev, B43_PHY_RFOVER, 0x400);
+ b43_phy_write(dev, B43_PHY_PGACTL, 0xC0);
+ }
+ if (phy->gmode || phy->rev >= 2) {
+ tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM);
+ tmp &= B43_PHYVER_VERSION;
+ if (tmp == 3 || tmp == 5) {
+ b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816);
+ b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006);
}
+ if (tmp == 5) {
+ b43_phy_write(dev, B43_PHY_OFDM(0xCC),
+ (b43_phy_read(dev, B43_PHY_OFDM(0xCC))
+ & 0x00FF) | 0x1F00);
+ }
+ }
+ if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2)
+ b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78);
+ if (phy->radio_rev == 8) {
+ b43_phy_write(dev, B43_PHY_EXTG(0x01),
+ b43_phy_read(dev, B43_PHY_EXTG(0x01))
+ | 0x80);
+ b43_phy_write(dev, B43_PHY_OFDM(0x3E),
+ b43_phy_read(dev, B43_PHY_OFDM(0x3E))
+ | 0x4);
+ }
+ if (has_loopback_gain(phy))
+ b43_calc_loopback_gain(dev);
+
+ if (phy->radio_rev != 8) {
+ if (gphy->initval == 0xFFFF)
+ gphy->initval = b43_radio_init2050(dev);
+ else
+ b43_radio_write16(dev, 0x0078, gphy->initval);
+ }
+ b43_lo_g_init(dev);
+ if (has_tx_magnification(phy)) {
+ b43_radio_write16(dev, 0x52,
+ (b43_radio_read16(dev, 0x52) & 0xFF00)
+ | gphy->lo_control->tx_bias | gphy->
+ lo_control->tx_magn);
+ } else {
+ b43_radio_write16(dev, 0x52,
+ (b43_radio_read16(dev, 0x52) & 0xFFF0)
+ | gphy->lo_control->tx_bias);
+ }
+ if (phy->rev >= 6) {
+ b43_phy_write(dev, B43_PHY_CCK(0x36),
+ (b43_phy_read(dev, B43_PHY_CCK(0x36))
+ & 0x0FFF) | (gphy->lo_control->
+ tx_bias << 12));
+ }
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
+ else
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
+ if (phy->rev < 2)
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101);
+ else
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202);
+ if (phy->gmode || phy->rev >= 2) {
+ b43_lo_g_adjust(dev);
+ b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
}
- /* First we set the channel radio code to prevent the
- * firmware from sending ghost packets.
- */
- channelcookie = channel;
- if (0 /*FIXME on 5Ghz */)
- channelcookie |= 0x100;
- //FIXME set 40Mhz flag if required
- savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
- b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
-
- switch (phy->type) {
- case B43_PHYTYPE_A:
- if (channel > 200) {
- err = -EINVAL;
- goto out;
+ if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+ /* The specs state to update the NRSSI LT with
+ * the value 0x7FFFFFFF here. I think that is some weird
+ * compiler optimization in the original driver.
+ * Essentially, what we do here is resetting all NRSSI LT
+ * entries to -32 (see the clamp_val() in nrssi_hw_update())
+ */
+ b43_nrssi_hw_update(dev, 0xFFFF); //FIXME?
+ b43_calc_nrssi_threshold(dev);
+ } else if (phy->gmode || phy->rev >= 2) {
+ if (gphy->nrssi[0] == -1000) {
+ B43_WARN_ON(gphy->nrssi[1] != -1000);
+ b43_calc_nrssi_slope(dev);
+ } else
+ b43_calc_nrssi_threshold(dev);
+ }
+ if (phy->radio_rev == 8)
+ b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230);
+ b43_phy_init_pctl(dev);
+ /* FIXME: The spec says in the following if, the 0 should be replaced
+ 'if OFDM may not be used in the current locale'
+ but OFDM is legal everywhere */
+ if ((dev->dev->bus->chip_id == 0x4306
+ && dev->dev->bus->chip_package == 2) || 0) {
+ b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0)
+ & 0xBFFF);
+ b43_phy_write(dev, B43_PHY_OFDM(0xC3),
+ b43_phy_read(dev, B43_PHY_OFDM(0xC3))
+ & 0x7FFF);
+ }
+}
+
+void b43_gphy_channel_switch(struct b43_wldev *dev,
+ unsigned int channel,
+ bool synthetic_pu_workaround)
+{
+ if (synthetic_pu_workaround)
+ b43_synth_pu_workaround(dev, channel);
+
+ b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
+
+ if (channel == 14) {
+ if (dev->dev->bus->sprom.country_code ==
+ SSB_SPROM1CCODE_JAPAN)
+ b43_hf_write(dev,
+ b43_hf_read(dev) & ~B43_HF_ACPR);
+ else
+ b43_hf_write(dev,
+ b43_hf_read(dev) | B43_HF_ACPR);
+ b43_write16(dev, B43_MMIO_CHANNEL_EXT,
+ b43_read16(dev, B43_MMIO_CHANNEL_EXT)
+ | (1 << 11));
+ } else {
+ b43_write16(dev, B43_MMIO_CHANNEL_EXT,
+ b43_read16(dev, B43_MMIO_CHANNEL_EXT)
+ & 0xF7BF);
+ }
+}
+
+static void default_baseband_attenuation(struct b43_wldev *dev,
+ struct b43_bbatt *bb)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ if (phy->radio_ver == 0x2050 && phy->radio_rev < 6)
+ bb->att = 0;
+ else
+ bb->att = 2;
+}
+
+static void default_radio_attenuation(struct b43_wldev *dev,
+ struct b43_rfatt *rf)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct b43_phy *phy = &dev->phy;
+
+ rf->with_padmix = 0;
+
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
+ bus->boardinfo.type == SSB_BOARD_BCM4309G) {
+ if (bus->boardinfo.rev < 0x43) {
+ rf->att = 2;
+ return;
+ } else if (bus->boardinfo.rev < 0x51) {
+ rf->att = 3;
+ return;
}
- freq = channel2freq_a(channel);
-
- r8 = b43_radio_read16(dev, 0x0008);
- b43_write16(dev, 0x03F0, freq);
- b43_radio_write16(dev, 0x0008, r8);
-
- //TODO: write max channel TX power? to Radio 0x2D
- tmp = b43_radio_read16(dev, 0x002E);
- tmp &= 0x0080;
- //TODO: OR tmp with the Power out estimation for this channel?
- b43_radio_write16(dev, 0x002E, tmp);
-
- if (freq >= 4920 && freq <= 5500) {
- /*
- * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F;
- * = (freq * 0.025862069
- */
- r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */
+ }
+
+ if (phy->type == B43_PHYTYPE_A) {
+ rf->att = 0x60;
+ return;
+ }
+
+ switch (phy->radio_ver) {
+ case 0x2053:
+ switch (phy->radio_rev) {
+ case 1:
+ rf->att = 6;
+ return;
}
- b43_radio_write16(dev, 0x0007, (r8 << 4) | r8);
- b43_radio_write16(dev, 0x0020, (r8 << 4) | r8);
- b43_radio_write16(dev, 0x0021, (r8 << 4) | r8);
- b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022)
- & 0x000F) | (r8 << 4));
- b43_radio_write16(dev, 0x002A, (r8 << 4));
- b43_radio_write16(dev, 0x002B, (r8 << 4));
- b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008)
- & 0x00F0) | (r8 << 4));
- b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029)
- & 0xFF0F) | 0x00B0);
- b43_radio_write16(dev, 0x0035, 0x00AA);
- b43_radio_write16(dev, 0x0036, 0x0085);
- b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A)
- & 0xFF20) |
- freq_r3A_value(freq));
- b43_radio_write16(dev, 0x003D,
- b43_radio_read16(dev, 0x003D) & 0x00FF);
- b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081)
- & 0xFF7F) | 0x0080);
- b43_radio_write16(dev, 0x0035,
- b43_radio_read16(dev, 0x0035) & 0xFFEF);
- b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035)
- & 0xFFEF) | 0x0010);
- b43_radio_set_tx_iq(dev);
- //TODO: TSSI2dbm workaround
- b43_phy_xmitpower(dev); //FIXME correct?
break;
- case B43_PHYTYPE_G:
- if ((channel < 1) || (channel > 14)) {
- err = -EINVAL;
- goto out;
+ case 0x2050:
+ switch (phy->radio_rev) {
+ case 0:
+ rf->att = 5;
+ return;
+ case 1:
+ if (phy->type == B43_PHYTYPE_G) {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
+ && bus->boardinfo.type == SSB_BOARD_BCM4309G
+ && bus->boardinfo.rev >= 30)
+ rf->att = 3;
+ else if (bus->boardinfo.vendor ==
+ SSB_BOARDVENDOR_BCM
+ && bus->boardinfo.type ==
+ SSB_BOARD_BU4306)
+ rf->att = 3;
+ else
+ rf->att = 1;
+ } else {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
+ && bus->boardinfo.type == SSB_BOARD_BCM4309G
+ && bus->boardinfo.rev >= 30)
+ rf->att = 7;
+ else
+ rf->att = 6;
+ }
+ return;
+ case 2:
+ if (phy->type == B43_PHYTYPE_G) {
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
+ && bus->boardinfo.type == SSB_BOARD_BCM4309G
+ && bus->boardinfo.rev >= 30)
+ rf->att = 3;
+ else if (bus->boardinfo.vendor ==
+ SSB_BOARDVENDOR_BCM
+ && bus->boardinfo.type ==
+ SSB_BOARD_BU4306)
+ rf->att = 5;
+ else if (bus->chip_id == 0x4320)
+ rf->att = 4;
+ else
+ rf->att = 3;
+ } else
+ rf->att = 6;
+ return;
+ case 3:
+ rf->att = 5;
+ return;
+ case 4:
+ case 5:
+ rf->att = 1;
+ return;
+ case 6:
+ case 7:
+ rf->att = 5;
+ return;
+ case 8:
+ rf->att = 0xA;
+ rf->with_padmix = 1;
+ return;
+ case 9:
+ default:
+ rf->att = 5;
+ return;
}
+ }
+ rf->att = 5;
+}
- if (synthetic_pu_workaround)
- b43_synth_pu_workaround(dev, channel);
+static u16 default_tx_control(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
- b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
+ if (phy->radio_ver != 0x2050)
+ return 0;
+ if (phy->radio_rev == 1)
+ return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX;
+ if (phy->radio_rev < 6)
+ return B43_TXCTL_PA2DB;
+ if (phy->radio_rev == 8)
+ return B43_TXCTL_TXMIX;
+ return 0;
+}
- if (channel == 14) {
- if (dev->dev->bus->sprom.country_code ==
- SSB_SPROM1CCODE_JAPAN)
- b43_hf_write(dev,
- b43_hf_read(dev) & ~B43_HF_ACPR);
- else
- b43_hf_write(dev,
- b43_hf_read(dev) | B43_HF_ACPR);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT,
- b43_read16(dev, B43_MMIO_CHANNEL_EXT)
- | (1 << 11));
- } else {
- b43_write16(dev, B43_MMIO_CHANNEL_EXT,
- b43_read16(dev, B43_MMIO_CHANNEL_EXT)
- & 0xF7BF);
+static u8 b43_gphy_aci_detect(struct b43_wldev *dev, u8 channel)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ u8 ret = 0;
+ u16 saved, rssi, temp;
+ int i, j = 0;
+
+ saved = b43_phy_read(dev, 0x0403);
+ b43_switch_channel(dev, channel);
+ b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5);
+ if (gphy->aci_hw_rssi)
+ rssi = b43_phy_read(dev, 0x048A) & 0x3F;
+ else
+ rssi = saved & 0x3F;
+ /* clamp temp to signed 5bit */
+ if (rssi > 32)
+ rssi -= 64;
+ for (i = 0; i < 100; i++) {
+ temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F;
+ if (temp > 32)
+ temp -= 64;
+ if (temp < rssi)
+ j++;
+ if (j >= 20)
+ ret = 1;
+ }
+ b43_phy_write(dev, 0x0403, saved);
+
+ return ret;
+}
+
+static u8 b43_gphy_aci_scan(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ u8 ret[13];
+ unsigned int channel = phy->channel;
+ unsigned int i, j, start, end;
+
+ if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0)))
+ return 0;
+
+ b43_phy_lock(dev);
+ b43_radio_lock(dev);
+ b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC);
+ b43_phy_write(dev, B43_PHY_G_CRS,
+ b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF);
+ b43_set_all_gains(dev, 3, 8, 1);
+
+ start = (channel - 5 > 0) ? channel - 5 : 1;
+ end = (channel + 5 < 14) ? channel + 5 : 13;
+
+ for (i = start; i <= end; i++) {
+ if (abs(channel - i) > 2)
+ ret[i - 1] = b43_gphy_aci_detect(dev, i);
+ }
+ b43_switch_channel(dev, channel);
+ b43_phy_write(dev, 0x0802,
+ (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003);
+ b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8);
+ b43_phy_write(dev, B43_PHY_G_CRS,
+ b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000);
+ b43_set_original_gains(dev);
+ for (i = 0; i < 13; i++) {
+ if (!ret[i])
+ continue;
+ end = (i + 5 < 13) ? i + 5 : 13;
+ for (j = i; j < end; j++)
+ ret[j] = 1;
+ }
+ b43_radio_unlock(dev);
+ b43_phy_unlock(dev);
+
+ return ret[channel - 1];
+}
+
+static s32 b43_tssi2dbm_ad(s32 num, s32 den)
+{
+ if (num < 0)
+ return num / den;
+ else
+ return (num + den / 2) / den;
+}
+
+static s8 b43_tssi2dbm_entry(s8 entry[], u8 index,
+ s16 pab0, s16 pab1, s16 pab2)
+{
+ s32 m1, m2, f = 256, q, delta;
+ s8 i = 0;
+
+ m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32);
+ m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1);
+ do {
+ if (i > 15)
+ return -EINVAL;
+ q = b43_tssi2dbm_ad(f * 4096 -
+ b43_tssi2dbm_ad(m2 * f, 16) * f, 2048);
+ delta = abs(q - f);
+ f = q;
+ i++;
+ } while (delta >= 2);
+ entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128);
+ return 0;
+}
+
+u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+ s16 pab0, s16 pab1, s16 pab2)
+{
+ unsigned int i;
+ u8 *tab;
+ int err;
+
+ tab = kmalloc(64, GFP_KERNEL);
+ if (!tab) {
+ b43err(dev->wl, "Could not allocate memory "
+ "for tssi2dbm table\n");
+ return NULL;
+ }
+ for (i = 0; i < 64; i++) {
+ err = b43_tssi2dbm_entry(tab, i, pab0, pab1, pab2);
+ if (err) {
+ b43err(dev->wl, "Could not generate "
+ "tssi2dBm table\n");
+ kfree(tab);
+ return NULL;
}
- break;
- case B43_PHYTYPE_N:
- err = b43_nphy_selectchannel(dev, channel);
- if (err)
- goto out;
- break;
- default:
- B43_WARN_ON(1);
}
- phy->channel = channel;
- /* Wait for the radio to tune to the channel and stabilize. */
- msleep(8);
-out:
- if (err) {
- b43_shm_write16(dev, B43_SHM_SHARED,
- B43_SHM_SH_CHAN, savedcookie);
+ return tab;
+}
+
+/* Initialise the TSSI->dBm lookup table */
+static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ s16 pab0, pab1, pab2;
+
+ pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
+ pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
+ pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
+
+ B43_WARN_ON((dev->dev->bus->chip_id == 0x4301) &&
+ (phy->radio_ver != 0x2050)); /* Not supported anymore */
+
+ gphy->dyn_tssi_tbl = 0;
+
+ if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
+ pab0 != -1 && pab1 != -1 && pab2 != -1) {
+ /* The pabX values are set in SPROM. Use them. */
+ if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
+ (s8) dev->dev->bus->sprom.itssi_bg != -1) {
+ gphy->tgt_idle_tssi =
+ (s8) (dev->dev->bus->sprom.itssi_bg);
+ } else
+ gphy->tgt_idle_tssi = 62;
+ gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
+ pab1, pab2);
+ if (!gphy->tssi2dbm)
+ return -ENOMEM;
+ gphy->dyn_tssi_tbl = 1;
+ } else {
+ /* pabX values not set in SPROM. */
+ gphy->tgt_idle_tssi = 52;
+ gphy->tssi2dbm = b43_tssi2dbm_g_table;
}
+
+ return 0;
+}
+
+static int b43_gphy_op_allocate(struct b43_wldev *dev)
+{
+ struct b43_phy_g *gphy;
+ struct b43_txpower_lo_control *lo;
+ int err;
+
+ gphy = kzalloc(sizeof(*gphy), GFP_KERNEL);
+ if (!gphy) {
+ err = -ENOMEM;
+ goto error;
+ }
+ dev->phy.g = gphy;
+
+ lo = kzalloc(sizeof(*lo), GFP_KERNEL);
+ if (!lo) {
+ err = -ENOMEM;
+ goto err_free_gphy;
+ }
+ gphy->lo_control = lo;
+
+ err = b43_gphy_init_tssi2dbm_table(dev);
+ if (err)
+ goto err_free_lo;
+
+ return 0;
+
+err_free_lo:
+ kfree(lo);
+err_free_gphy:
+ kfree(gphy);
+error:
return err;
}
-void b43_radio_turn_on(struct b43_wldev *dev)
+static void b43_gphy_op_prepare_structs(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- int err;
- u8 channel;
+ struct b43_phy_g *gphy = phy->g;
+ const void *tssi2dbm;
+ int tgt_idle_tssi;
+ struct b43_txpower_lo_control *lo;
+ unsigned int i;
+
+ /* tssi2dbm table is constant, so it is initialized at alloc time.
+ * Save a copy of the pointer. */
+ tssi2dbm = gphy->tssi2dbm;
+ tgt_idle_tssi = gphy->tgt_idle_tssi;
+ /* Save the LO pointer. */
+ lo = gphy->lo_control;
+
+ /* Zero out the whole PHY structure. */
+ memset(gphy, 0, sizeof(*gphy));
+
+ /* Restore pointers. */
+ gphy->tssi2dbm = tssi2dbm;
+ gphy->tgt_idle_tssi = tgt_idle_tssi;
+ gphy->lo_control = lo;
+
+ memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig));
+
+ /* NRSSI */
+ for (i = 0; i < ARRAY_SIZE(gphy->nrssi); i++)
+ gphy->nrssi[i] = -1000;
+ for (i = 0; i < ARRAY_SIZE(gphy->nrssi_lt); i++)
+ gphy->nrssi_lt[i] = i;
+
+ gphy->lofcal = 0xFFFF;
+ gphy->initval = 0xFFFF;
+
+ gphy->interfmode = B43_INTERFMODE_NONE;
+
+ /* OFDM-table address caching. */
+ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
+
+ gphy->average_tssi = 0xFF;
+
+ /* Local Osciallator structure */
+ lo->tx_bias = 0xFF;
+ INIT_LIST_HEAD(&lo->calib_list);
+}
+
+static void b43_gphy_op_free(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+
+ kfree(gphy->lo_control);
+
+ if (gphy->dyn_tssi_tbl)
+ kfree(gphy->tssi2dbm);
+ gphy->dyn_tssi_tbl = 0;
+ gphy->tssi2dbm = NULL;
+
+ kfree(gphy);
+ dev->phy.g = NULL;
+}
+
+static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ struct b43_txpower_lo_control *lo = gphy->lo_control;
+
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+
+ default_baseband_attenuation(dev, &gphy->bbatt);
+ default_radio_attenuation(dev, &gphy->rfatt);
+ gphy->tx_control = (default_tx_control(dev) << 4);
+ generate_rfatt_list(dev, &lo->rfatt_list);
+ generate_bbatt_list(dev, &lo->bbatt_list);
+
+ /* Commit previous writes */
+ b43_read32(dev, B43_MMIO_MACCTL);
+
+ if (phy->rev == 1) {
+ /* Workaround: Temporarly disable gmode through the early init
+ * phase, as the gmode stuff is not needed for phy rev 1 */
+ phy->gmode = 0;
+ b43_wireless_core_reset(dev, 0);
+ b43_phy_initg(dev);
+ phy->gmode = 1;
+ b43_wireless_core_reset(dev, B43_TMSLOW_GMODE);
+ }
+
+ return 0;
+}
+
+static int b43_gphy_op_init(struct b43_wldev *dev)
+{
+ b43_phy_initg(dev);
+
+ return 0;
+}
+
+static void b43_gphy_op_exit(struct b43_wldev *dev)
+{
+ b43_lo_g_cleanup(dev);
+}
+
+static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_gphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_gphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+ /* G-PHY needs 0x80 for read access. */
+ reg |= 0x80;
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_gphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev)
+{
+ return (dev->phy.rev >= 6);
+}
+
+static void b43_gphy_op_software_rfkill(struct b43_wldev *dev,
+ enum rfkill_state state)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ unsigned int channel;
might_sleep();
- if (phy->radio_on)
- return;
+ if (state == RFKILL_STATE_UNBLOCKED) {
+ /* Turn radio ON */
+ if (phy->radio_on)
+ return;
- switch (phy->type) {
- case B43_PHYTYPE_A:
- b43_radio_write16(dev, 0x0004, 0x00C0);
- b43_radio_write16(dev, 0x0005, 0x0008);
- b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7);
- b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7);
- b43_radio_init2060(dev);
- break;
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:
b43_phy_write(dev, 0x0015, 0x8000);
b43_phy_write(dev, 0x0015, 0xCC00);
b43_phy_write(dev, 0x0015, (phy->gmode ? 0x00C0 : 0x0000));
- if (phy->radio_off_context.valid) {
+ if (gphy->radio_off_context.valid) {
/* Restore the RFover values. */
b43_phy_write(dev, B43_PHY_RFOVER,
- phy->radio_off_context.rfover);
+ gphy->radio_off_context.rfover);
b43_phy_write(dev, B43_PHY_RFOVERVAL,
- phy->radio_off_context.rfoverval);
- phy->radio_off_context.valid = 0;
+ gphy->radio_off_context.rfoverval);
+ gphy->radio_off_context.valid = 0;
}
channel = phy->channel;
- err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_BG, 1);
- err |= b43_radio_selectchannel(dev, channel, 0);
- B43_WARN_ON(err);
- break;
- case B43_PHYTYPE_N:
- b43_nphy_radio_turn_on(dev);
- break;
- default:
- B43_WARN_ON(1);
+ b43_gphy_channel_switch(dev, 6, 1);
+ b43_gphy_channel_switch(dev, channel, 0);
+ } else {
+ /* Turn radio OFF */
+ u16 rfover, rfoverval;
+
+ rfover = b43_phy_read(dev, B43_PHY_RFOVER);
+ rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL);
+ gphy->radio_off_context.rfover = rfover;
+ gphy->radio_off_context.rfoverval = rfoverval;
+ gphy->radio_off_context.valid = 1;
+ b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C);
+ b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73);
}
- phy->radio_on = 1;
}
-void b43_radio_turn_off(struct b43_wldev *dev, bool force)
+static int b43_gphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel)
+{
+ if ((new_channel < 1) || (new_channel > 14))
+ return -EINVAL;
+ b43_gphy_channel_switch(dev, new_channel, 0);
+
+ return 0;
+}
+
+static unsigned int b43_gphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ return 1; /* Default to channel 1 */
+}
+
+static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
{
struct b43_phy *phy = &dev->phy;
+ u64 hf;
+ u16 tmp;
+ int autodiv = 0;
- if (!phy->radio_on && !force)
- return;
+ if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
+ autodiv = 1;
+
+ hf = b43_hf_read(dev);
+ hf &= ~B43_HF_ANTDIVHELP;
+ b43_hf_write(dev, hf);
+
+ tmp = b43_phy_read(dev, B43_PHY_BBANDCFG);
+ tmp &= ~B43_PHY_BBANDCFG_RXANT;
+ tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
+ << B43_PHY_BBANDCFG_RXANT_SHIFT;
+ b43_phy_write(dev, B43_PHY_BBANDCFG, tmp);
+
+ if (autodiv) {
+ tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
+ if (antenna == B43_ANTENNA_AUTO0)
+ tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
+ else
+ tmp |= B43_PHY_ANTDWELL_AUTODIV1;
+ b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
+ }
+ tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT);
+ if (autodiv)
+ tmp |= B43_PHY_ANTWRSETT_ARXDIV;
+ else
+ tmp &= ~B43_PHY_ANTWRSETT_ARXDIV;
+ b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp);
+ if (phy->rev >= 2) {
+ tmp = b43_phy_read(dev, B43_PHY_OFDM61);
+ tmp |= B43_PHY_OFDM61_10;
+ b43_phy_write(dev, B43_PHY_OFDM61, tmp);
+
+ tmp =
+ b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK);
+ tmp = (tmp & 0xFF00) | 0x15;
+ b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK,
+ tmp);
+
+ if (phy->rev == 2) {
+ b43_phy_write(dev, B43_PHY_ADIVRELATED,
+ 8);
+ } else {
+ tmp =
+ b43_phy_read(dev,
+ B43_PHY_ADIVRELATED);
+ tmp = (tmp & 0xFF00) | 8;
+ b43_phy_write(dev, B43_PHY_ADIVRELATED,
+ tmp);
+ }
+ }
+ if (phy->rev >= 6)
+ b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC);
+
+ hf |= B43_HF_ANTDIVHELP;
+ b43_hf_write(dev, hf);
+}
- switch (phy->type) {
- case B43_PHYTYPE_N:
- b43_nphy_radio_turn_off(dev);
+static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev,
+ enum b43_interference_mitigation mode)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ int currentmode;
+
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+ if ((phy->rev == 0) || (!phy->gmode))
+ return -ENODEV;
+
+ gphy->aci_wlan_automatic = 0;
+ switch (mode) {
+ case B43_INTERFMODE_AUTOWLAN:
+ gphy->aci_wlan_automatic = 1;
+ if (gphy->aci_enable)
+ mode = B43_INTERFMODE_MANUALWLAN;
+ else
+ mode = B43_INTERFMODE_NONE;
break;
- case B43_PHYTYPE_A:
- b43_radio_write16(dev, 0x0004, 0x00FF);
- b43_radio_write16(dev, 0x0005, 0x00FB);
- b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008);
- b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008);
+ case B43_INTERFMODE_NONE:
+ case B43_INTERFMODE_NONWLAN:
+ case B43_INTERFMODE_MANUALWLAN:
break;
- case B43_PHYTYPE_G: {
- u16 rfover, rfoverval;
+ default:
+ return -EINVAL;
+ }
- rfover = b43_phy_read(dev, B43_PHY_RFOVER);
- rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL);
- if (!force) {
- phy->radio_off_context.rfover = rfover;
- phy->radio_off_context.rfoverval = rfoverval;
- phy->radio_off_context.valid = 1;
+ currentmode = gphy->interfmode;
+ if (currentmode == mode)
+ return 0;
+ if (currentmode != B43_INTERFMODE_NONE)
+ b43_radio_interference_mitigation_disable(dev, currentmode);
+
+ if (mode == B43_INTERFMODE_NONE) {
+ gphy->aci_enable = 0;
+ gphy->aci_hw_rssi = 0;
+ } else
+ b43_radio_interference_mitigation_enable(dev, mode);
+ gphy->interfmode = mode;
+
+ return 0;
+}
+
+/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
+ * This function converts a TSSI value to dBm in Q5.2
+ */
+static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
+{
+ struct b43_phy_g *gphy = dev->phy.g;
+ s8 dbm;
+ s32 tmp;
+
+ tmp = (gphy->tgt_idle_tssi - gphy->cur_idle_tssi + tssi);
+ tmp = clamp_val(tmp, 0x00, 0x3F);
+ dbm = gphy->tssi2dbm[tmp];
+
+ return dbm;
+}
+
+static void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
+ int *_bbatt, int *_rfatt)
+{
+ int rfatt = *_rfatt;
+ int bbatt = *_bbatt;
+ struct b43_txpower_lo_control *lo = dev->phy.g->lo_control;
+
+ /* Get baseband and radio attenuation values into their permitted ranges.
+ * Radio attenuation affects power level 4 times as much as baseband. */
+
+ /* Range constants */
+ const int rf_min = lo->rfatt_list.min_val;
+ const int rf_max = lo->rfatt_list.max_val;
+ const int bb_min = lo->bbatt_list.min_val;
+ const int bb_max = lo->bbatt_list.max_val;
+
+ while (1) {
+ if (rfatt > rf_max && bbatt > bb_max - 4)
+ break; /* Can not get it into ranges */
+ if (rfatt < rf_min && bbatt < bb_min + 4)
+ break; /* Can not get it into ranges */
+ if (bbatt > bb_max && rfatt > rf_max - 1)
+ break; /* Can not get it into ranges */
+ if (bbatt < bb_min && rfatt < rf_min + 1)
+ break; /* Can not get it into ranges */
+
+ if (bbatt > bb_max) {
+ bbatt -= 4;
+ rfatt += 1;
+ continue;
+ }
+ if (bbatt < bb_min) {
+ bbatt += 4;
+ rfatt -= 1;
+ continue;
+ }
+ if (rfatt > rf_max) {
+ rfatt -= 1;
+ bbatt += 4;
+ continue;
+ }
+ if (rfatt < rf_min) {
+ rfatt += 1;
+ bbatt -= 4;
+ continue;
}
- b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C);
- b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73);
break;
}
- default:
- B43_WARN_ON(1);
+
+ *_rfatt = clamp_val(rfatt, rf_min, rf_max);
+ *_bbatt = clamp_val(bbatt, bb_min, bb_max);
+}
+
+static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ int rfatt, bbatt;
+ u8 tx_control;
+
+ spin_lock_irq(&dev->wl->irq_lock);
+
+ /* Calculate the new attenuation values. */
+ bbatt = gphy->bbatt.att;
+ bbatt += gphy->bbatt_delta;
+ rfatt = gphy->rfatt.att;
+ rfatt += gphy->rfatt_delta;
+
+ b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
+ tx_control = gphy->tx_control;
+ if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) {
+ if (rfatt <= 1) {
+ if (tx_control == 0) {
+ tx_control =
+ B43_TXCTL_PA2DB |
+ B43_TXCTL_TXMIX;
+ rfatt += 2;
+ bbatt += 2;
+ } else if (dev->dev->bus->sprom.
+ boardflags_lo &
+ B43_BFL_PACTRL) {
+ bbatt += 4 * (rfatt - 2);
+ rfatt = 2;
+ }
+ } else if (rfatt > 4 && tx_control) {
+ tx_control = 0;
+ if (bbatt < 3) {
+ rfatt -= 3;
+ bbatt += 2;
+ } else {
+ rfatt -= 2;
+ bbatt -= 2;
+ }
+ }
}
- phy->radio_on = 0;
+ /* Save the control values */
+ gphy->tx_control = tx_control;
+ b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
+ gphy->rfatt.att = rfatt;
+ gphy->bbatt.att = bbatt;
+
+ /* We drop the lock early, so we can sleep during hardware
+ * adjustment. Possible races with op_recalc_txpower are harmless,
+ * as we will be called once again in case we raced. */
+ spin_unlock_irq(&dev->wl->irq_lock);
+
+ if (b43_debug(dev, B43_DBG_XMITPOWER))
+ b43dbg(dev->wl, "Adjusting TX power\n");
+
+ /* Adjust the hardware */
+ b43_phy_lock(dev);
+ b43_radio_lock(dev);
+ b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt,
+ gphy->tx_control);
+ b43_radio_unlock(dev);
+ b43_phy_unlock(dev);
}
+
+static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
+ bool ignore_tssi)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+ unsigned int average_tssi;
+ int cck_result, ofdm_result;
+ int estimated_pwr, desired_pwr, pwr_adjust;
+ int rfatt_delta, bbatt_delta;
+ unsigned int max_pwr;
+
+ /* First get the average TSSI */
+ cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK);
+ ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G);
+ if ((cck_result < 0) && (ofdm_result < 0)) {
+ /* No TSSI information available */
+ if (!ignore_tssi)
+ goto no_adjustment_needed;
+ cck_result = 0;
+ ofdm_result = 0;
+ }
+ if (cck_result < 0)
+ average_tssi = ofdm_result;
+ else if (ofdm_result < 0)
+ average_tssi = cck_result;
+ else
+ average_tssi = (cck_result + ofdm_result) / 2;
+ /* Merge the average with the stored value. */
+ if (likely(gphy->average_tssi != 0xFF))
+ average_tssi = (average_tssi + gphy->average_tssi) / 2;
+ gphy->average_tssi = average_tssi;
+ B43_WARN_ON(average_tssi >= B43_TSSI_MAX);
+
+ /* Estimate the TX power emission based on the TSSI */
+ estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi);
+
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+ max_pwr = dev->dev->bus->sprom.maxpwr_bg;
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+ max_pwr -= 3; /* minus 0.75 */
+ if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) {
+ b43warn(dev->wl,
+ "Invalid max-TX-power value in SPROM.\n");
+ max_pwr = INT_TO_Q52(20); /* fake it */
+ dev->dev->bus->sprom.maxpwr_bg = max_pwr;
+ }
+
+ /* Get desired power (in Q5.2) */
+ if (phy->desired_txpower < 0)
+ desired_pwr = INT_TO_Q52(0);
+ else
+ desired_pwr = INT_TO_Q52(phy->desired_txpower);
+ /* And limit it. max_pwr already is Q5.2 */
+ desired_pwr = clamp_val(desired_pwr, 0, max_pwr);
+ if (b43_debug(dev, B43_DBG_XMITPOWER)) {
+ b43dbg(dev->wl,
+ "[TX power] current = " Q52_FMT
+ " dBm, desired = " Q52_FMT
+ " dBm, max = " Q52_FMT "\n",
+ Q52_ARG(estimated_pwr),
+ Q52_ARG(desired_pwr),
+ Q52_ARG(max_pwr));
+ }
+
+ /* Calculate the adjustment delta. */
+ pwr_adjust = desired_pwr - estimated_pwr;
+ if (pwr_adjust == 0)
+ goto no_adjustment_needed;
+
+ /* RF attenuation delta. */
+ rfatt_delta = ((pwr_adjust + 7) / 8);
+ /* Lower attenuation => Bigger power output. Negate it. */
+ rfatt_delta = -rfatt_delta;
+
+ /* Baseband attenuation delta. */
+ bbatt_delta = pwr_adjust / 2;
+ /* Lower attenuation => Bigger power output. Negate it. */
+ bbatt_delta = -bbatt_delta;
+ /* RF att affects power level 4 times as much as
+ * Baseband attennuation. Subtract it. */
+ bbatt_delta -= 4 * rfatt_delta;
+
+ if (b43_debug(dev, B43_DBG_XMITPOWER)) {
+ int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust;
+ b43dbg(dev->wl,
+ "[TX power deltas] %s" Q52_FMT " dBm => "
+ "bbatt-delta = %d, rfatt-delta = %d\n",
+ (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm),
+ bbatt_delta, rfatt_delta);
+ }
+ /* So do we finally need to adjust something in hardware? */
+ if ((rfatt_delta == 0) && (bbatt_delta == 0))
+ goto no_adjustment_needed;
+
+ /* Save the deltas for later when we adjust the power. */
+ gphy->bbatt_delta = bbatt_delta;
+ gphy->rfatt_delta = rfatt_delta;
+
+ /* We need to adjust the TX power on the device. */
+ return B43_TXPWR_RES_NEED_ADJUST;
+
+no_adjustment_needed:
+ return B43_TXPWR_RES_DONE;
+}
+
+static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
+
+ //TODO: update_aci_moving_average
+ if (gphy->aci_enable && gphy->aci_wlan_automatic) {
+ b43_mac_suspend(dev);
+ if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) {
+ if (0 /*TODO: bunch of conditions */ ) {
+ phy->ops->interf_mitigation(dev,
+ B43_INTERFMODE_MANUALWLAN);
+ }
+ } else if (0 /*TODO*/) {
+ if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev))
+ phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
+ }
+ b43_mac_enable(dev);
+ } else if (gphy->interfmode == B43_INTERFMODE_NONWLAN &&
+ phy->rev == 1) {
+ //TODO: implement rev1 workaround
+ }
+ b43_lo_g_maintanance_work(dev);
+}
+
+static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+
+ if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI))
+ return;
+
+ b43_mac_suspend(dev);
+ b43_calc_nrssi_slope(dev);
+ if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
+ u8 old_chan = phy->channel;
+
+ /* VCO Calibration */
+ if (old_chan >= 8)
+ b43_switch_channel(dev, 1);
+ else
+ b43_switch_channel(dev, 13);
+ b43_switch_channel(dev, old_chan);
+ }
+ b43_mac_enable(dev);
+}
+
+const struct b43_phy_operations b43_phyops_g = {
+ .allocate = b43_gphy_op_allocate,
+ .free = b43_gphy_op_free,
+ .prepare_structs = b43_gphy_op_prepare_structs,
+ .prepare_hardware = b43_gphy_op_prepare_hardware,
+ .init = b43_gphy_op_init,
+ .exit = b43_gphy_op_exit,
+ .phy_read = b43_gphy_op_read,
+ .phy_write = b43_gphy_op_write,
+ .radio_read = b43_gphy_op_radio_read,
+ .radio_write = b43_gphy_op_radio_write,
+ .supports_hwpctl = b43_gphy_op_supports_hwpctl,
+ .software_rfkill = b43_gphy_op_software_rfkill,
+ .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_channel = b43_gphy_op_switch_channel,
+ .get_default_chan = b43_gphy_op_get_default_chan,
+ .set_rx_antenna = b43_gphy_op_set_rx_antenna,
+ .interf_mitigation = b43_gphy_op_interf_mitigation,
+ .recalc_txpower = b43_gphy_op_recalc_txpower,
+ .adjust_txpower = b43_gphy_op_adjust_txpower,
+ .pwork_15sec = b43_gphy_op_pwork_15sec,
+ .pwork_60sec = b43_gphy_op_pwork_60sec,
+};
diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
new file mode 100644
index 00000000000..718947fd41a
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_g.h
@@ -0,0 +1,209 @@
+#ifndef LINUX_B43_PHY_G_H_
+#define LINUX_B43_PHY_G_H_
+
+/* OFDM PHY registers are defined in the A-PHY header. */
+#include "phy_a.h"
+
+/* CCK (B) PHY Registers */
+#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */
+#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */
+#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */
+#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */
+#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */
+#define B43_PHY_PGACTL_UNKNOWN 0xEFA0
+#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */
+#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */
+#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */
+#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */
+#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35)
+#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */
+#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */
+#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */
+
+/* Extended G-PHY Registers */
+#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */
+#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */
+#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */
+#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */
+#define B43_PHY_GTABNR_SHIFT 10
+#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */
+#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */
+#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */
+#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */
+#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */
+#define B43_PHY_RFOVERVAL_EXTLNA 0x8000
+#define B43_PHY_RFOVERVAL_LNA 0x7000
+#define B43_PHY_RFOVERVAL_LNA_SHIFT 12
+#define B43_PHY_RFOVERVAL_PGA 0x0F00
+#define B43_PHY_RFOVERVAL_PGA_SHIFT 8
+#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */
+#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0
+#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */
+#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */
+#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */
+#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */
+#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */
+
+
+/*** G-PHY table numbers */
+#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset))
+#define B43_GTAB_NRSSI B43_GTAB(0x00, 0)
+#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120)
+#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298)
+
+u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset);
+void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value);
+
+
+/* Returns the boolean whether "TX Magnification" is enabled. */
+#define has_tx_magnification(phy) \
+ (((phy)->rev >= 2) && \
+ ((phy)->radio_ver == 0x2050) && \
+ ((phy)->radio_rev == 8))
+/* Card uses the loopback gain stuff */
+#define has_loopback_gain(phy) \
+ (((phy)->rev > 1) || ((phy)->gmode))
+
+/* Radio Attenuation (RF Attenuation) */
+struct b43_rfatt {
+ u8 att; /* Attenuation value */
+ bool with_padmix; /* Flag, PAD Mixer enabled. */
+};
+struct b43_rfatt_list {
+ /* Attenuation values list */
+ const struct b43_rfatt *list;
+ u8 len;
+ /* Minimum/Maximum attenuation values */
+ u8 min_val;
+ u8 max_val;
+};
+
+/* Returns true, if the values are the same. */
+static inline bool b43_compare_rfatt(const struct b43_rfatt *a,
+ const struct b43_rfatt *b)
+{
+ return ((a->att == b->att) &&
+ (a->with_padmix == b->with_padmix));
+}
+
+/* Baseband Attenuation */
+struct b43_bbatt {
+ u8 att; /* Attenuation value */
+};
+struct b43_bbatt_list {
+ /* Attenuation values list */
+ const struct b43_bbatt *list;
+ u8 len;
+ /* Minimum/Maximum attenuation values */
+ u8 min_val;
+ u8 max_val;
+};
+
+/* Returns true, if the values are the same. */
+static inline bool b43_compare_bbatt(const struct b43_bbatt *a,
+ const struct b43_bbatt *b)
+{
+ return (a->att == b->att);
+}
+
+/* tx_control bits. */
+#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */
+#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */
+#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */
+
+struct b43_txpower_lo_control;
+
+struct b43_phy_g {
+ /* ACI (adjacent channel interference) flags. */
+ bool aci_enable;
+ bool aci_wlan_automatic;
+ bool aci_hw_rssi;
+
+ /* Radio switched on/off */
+ bool radio_on;
+ struct {
+ /* Values saved when turning the radio off.
+ * They are needed when turning it on again. */
+ bool valid;
+ u16 rfover;
+ u16 rfoverval;
+ } radio_off_context;
+
+ u16 minlowsig[2];
+ u16 minlowsigpos[2];
+
+ /* Pointer to the table used to convert a
+ * TSSI value to dBm-Q5.2 */
+ const s8 *tssi2dbm;
+ /* tssi2dbm is kmalloc()ed. Only used for free()ing. */
+ bool dyn_tssi_tbl;
+ /* Target idle TSSI */
+ int tgt_idle_tssi;
+ /* Current idle TSSI */
+ int cur_idle_tssi;
+ /* The current average TSSI.
+ * Needs irq_lock, as it's updated in the IRQ path. */
+ u8 average_tssi;
+ /* Current TX power level attenuation control values */
+ struct b43_bbatt bbatt;
+ struct b43_rfatt rfatt;
+ u8 tx_control; /* B43_TXCTL_XXX */
+ /* The calculated attenuation deltas that are used later
+ * when adjusting the actual power output. */
+ int bbatt_delta;
+ int rfatt_delta;
+
+ /* LocalOscillator control values. */
+ struct b43_txpower_lo_control *lo_control;
+ /* Values from b43_calc_loopback_gain() */
+ s16 max_lb_gain; /* Maximum Loopback gain in hdB */
+ s16 trsw_rx_gain; /* TRSW RX gain in hdB */
+ s16 lna_lod_gain; /* LNA lod */
+ s16 lna_gain; /* LNA */
+ s16 pga_gain; /* PGA */
+
+ /* Current Interference Mitigation mode */
+ int interfmode;
+ /* Stack of saved values from the Interference Mitigation code.
+ * Each value in the stack is layed out as follows:
+ * bit 0-11: offset
+ * bit 12-15: register ID
+ * bit 16-32: value
+ * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
+ */
+#define B43_INTERFSTACK_SIZE 26
+ u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure
+
+ /* Saved values from the NRSSI Slope calculation */
+ s16 nrssi[2];
+ s32 nrssislope;
+ /* In memory nrssi lookup table. */
+ s8 nrssi_lt[64];
+
+ u16 lofcal;
+
+ u16 initval; //FIXME rename?
+
+ /* The device does address auto increment for the OFDM tables.
+ * We cache the previously used address here and omit the address
+ * write on the next table access, if possible. */
+ u16 ofdmtab_addr; /* The address currently set in hardware. */
+ enum { /* The last data flow direction. */
+ B43_OFDMTAB_DIRECTION_UNKNOWN = 0,
+ B43_OFDMTAB_DIRECTION_READ,
+ B43_OFDMTAB_DIRECTION_WRITE,
+ } ofdmtab_addr_direction;
+};
+
+void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
+ u16 baseband_attenuation);
+void b43_gphy_channel_switch(struct b43_wldev *dev,
+ unsigned int channel,
+ bool synthetic_pu_workaround);
+u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+ s16 pab0, s16 pab1, s16 pab2);
+
+struct b43_phy_operations;
+extern const struct b43_phy_operations b43_phyops_g;
+
+#endif /* LINUX_B43_PHY_G_H_ */
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
new file mode 100644
index 00000000000..c5d9dc3667c
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -0,0 +1,155 @@
+/*
+
+ Broadcom B43 wireless driver
+ IEEE 802.11g LP-PHY driver
+
+ Copyright (c) 2008 Michael Buesch <mb@bu3sch.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "b43.h"
+#include "phy_lp.h"
+#include "phy_common.h"
+
+
+static int b43_lpphy_op_allocate(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy;
+
+ lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
+ if (!lpphy)
+ return -ENOMEM;
+ dev->phy.lp = lpphy;
+
+ return 0;
+}
+
+static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_lp *lpphy = phy->lp;
+
+ memset(lpphy, 0, sizeof(*lpphy));
+
+ //TODO
+}
+
+static void b43_lpphy_op_free(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ kfree(lpphy);
+ dev->phy.lp = NULL;
+}
+
+static int b43_lpphy_op_init(struct b43_wldev *dev)
+{
+ //TODO
+
+ return 0;
+}
+
+static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+ /* LP-PHY needs a special bit set for read access */
+ if (dev->phy.rev < 2) {
+ if (reg != 0x4001)
+ reg |= 0x100;
+ } else
+ reg |= 0x200;
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
+ enum rfkill_state state)
+{
+ //TODO
+}
+
+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel)
+{
+ //TODO
+ return 0;
+}
+
+static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ return 1; /* Default to channel 1 */
+}
+
+static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
+{
+ //TODO
+}
+
+static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
+{
+ //TODO
+}
+
+static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
+ bool ignore_tssi)
+{
+ //TODO
+ return B43_TXPWR_RES_DONE;
+}
+
+
+const struct b43_phy_operations b43_phyops_lp = {
+ .allocate = b43_lpphy_op_allocate,
+ .free = b43_lpphy_op_free,
+ .prepare_structs = b43_lpphy_op_prepare_structs,
+ .init = b43_lpphy_op_init,
+ .phy_read = b43_lpphy_op_read,
+ .phy_write = b43_lpphy_op_write,
+ .radio_read = b43_lpphy_op_radio_read,
+ .radio_write = b43_lpphy_op_radio_write,
+ .software_rfkill = b43_lpphy_op_software_rfkill,
+ .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_channel = b43_lpphy_op_switch_channel,
+ .get_default_chan = b43_lpphy_op_get_default_chan,
+ .set_rx_antenna = b43_lpphy_op_set_rx_antenna,
+ .recalc_txpower = b43_lpphy_op_recalc_txpower,
+ .adjust_txpower = b43_lpphy_op_adjust_txpower,
+};
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
new file mode 100644
index 00000000000..b0b5357abf9
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -0,0 +1,540 @@
+#ifndef LINUX_B43_PHY_LP_H_
+#define LINUX_B43_PHY_LP_H_
+
+/* Definitions for the LP-PHY */
+
+
+
+
+#define B43_LP_RADIO(radio_reg) (radio_reg)
+#define B43_LP_NORTH(radio_reg) B43_LP_RADIO(radio_reg)
+#define B43_LP_SOUTH(radio_reg) B43_LP_RADIO((radio_reg) | 0x4000)
+
+
+/*** Broadcom 2062 NORTH radio registers ***/
+#define B2062_N_COMM1 B43_LP_NORTH(0x000) /* Common 01 (north) */
+#define B2062_N_COMM2 B43_LP_NORTH(0x002) /* Common 02 (north) */
+#define B2062_N_COMM3 B43_LP_NORTH(0x003) /* Common 03 (north) */
+#define B2062_N_COMM4 B43_LP_NORTH(0x004) /* Common 04 (north) */
+#define B2062_N_COMM5 B43_LP_NORTH(0x005) /* Common 05 (north) */
+#define B2062_N_COMM6 B43_LP_NORTH(0x006) /* Common 06 (north) */
+#define B2062_N_COMM7 B43_LP_NORTH(0x007) /* Common 07 (north) */
+#define B2062_N_COMM8 B43_LP_NORTH(0x008) /* Common 08 (north) */
+#define B2062_N_COMM9 B43_LP_NORTH(0x009) /* Common 09 (north) */
+#define B2062_N_COMM10 B43_LP_NORTH(0x00A) /* Common 10 (north) */
+#define B2062_N_COMM11 B43_LP_NORTH(0x00B) /* Common 11 (north) */
+#define B2062_N_COMM12 B43_LP_NORTH(0x00C) /* Common 12 (north) */
+#define B2062_N_COMM13 B43_LP_NORTH(0x00D) /* Common 13 (north) */
+#define B2062_N_COMM14 B43_LP_NORTH(0x00E) /* Common 14 (north) */
+#define B2062_N_COMM15 B43_LP_NORTH(0x00F) /* Common 15 (north) */
+#define B2062_N_PDN_CTL0 B43_LP_NORTH(0x010) /* PDN Control 0 (north) */
+#define B2062_N_PDN_CTL1 B43_LP_NORTH(0x011) /* PDN Control 1 (north) */
+#define B2062_N_PDN_CTL2 B43_LP_NORTH(0x012) /* PDN Control 2 (north) */
+#define B2062_N_PDN_CTL3 B43_LP_NORTH(0x013) /* PDN Control 3 (north) */
+#define B2062_N_PDN_CTL4 B43_LP_NORTH(0x014) /* PDN Control 4 (north) */
+#define B2062_N_GEN_CTL0 B43_LP_NORTH(0x015) /* GEN Control 0 (north) */
+#define B2062_N_IQ_CALIB B43_LP_NORTH(0x016) /* IQ Calibration (north) */
+#define B2062_N_LGENC B43_LP_NORTH(0x017) /* LGENC (north) */
+#define B2062_N_LGENA_LPF B43_LP_NORTH(0x018) /* LGENA LPF (north) */
+#define B2062_N_LGENA_BIAS0 B43_LP_NORTH(0x019) /* LGENA Bias 0 (north) */
+#define B2062_N_LGNEA_BIAS1 B43_LP_NORTH(0x01A) /* LGNEA Bias 1 (north) */
+#define B2062_N_LGENA_CTL0 B43_LP_NORTH(0x01B) /* LGENA Control 0 (north) */
+#define B2062_N_LGENA_CTL1 B43_LP_NORTH(0x01C) /* LGENA Control 1 (north) */
+#define B2062_N_LGENA_CTL2 B43_LP_NORTH(0x01D) /* LGENA Control 2 (north) */
+#define B2062_N_LGENA_TUNE0 B43_LP_NORTH(0x01E) /* LGENA Tune 0 (north) */
+#define B2062_N_LGENA_TUNE1 B43_LP_NORTH(0x01F) /* LGENA Tune 1 (north) */
+#define B2062_N_LGENA_TUNE2 B43_LP_NORTH(0x020) /* LGENA Tune 2 (north) */
+#define B2062_N_LGENA_TUNE3 B43_LP_NORTH(0x021) /* LGENA Tune 3 (north) */
+#define B2062_N_LGENA_CTL3 B43_LP_NORTH(0x022) /* LGENA Control 3 (north) */
+#define B2062_N_LGENA_CTL4 B43_LP_NORTH(0x023) /* LGENA Control 4 (north) */
+#define B2062_N_LGENA_CTL5 B43_LP_NORTH(0x024) /* LGENA Control 5 (north) */
+#define B2062_N_LGENA_CTL6 B43_LP_NORTH(0x025) /* LGENA Control 6 (north) */
+#define B2062_N_LGENA_CTL7 B43_LP_NORTH(0x026) /* LGENA Control 7 (north) */
+#define B2062_N_RXA_CTL0 B43_LP_NORTH(0x027) /* RXA Control 0 (north) */
+#define B2062_N_RXA_CTL1 B43_LP_NORTH(0x028) /* RXA Control 1 (north) */
+#define B2062_N_RXA_CTL2 B43_LP_NORTH(0x029) /* RXA Control 2 (north) */
+#define B2062_N_RXA_CTL3 B43_LP_NORTH(0x02A) /* RXA Control 3 (north) */
+#define B2062_N_RXA_CTL4 B43_LP_NORTH(0x02B) /* RXA Control 4 (north) */
+#define B2062_N_RXA_CTL5 B43_LP_NORTH(0x02C) /* RXA Control 5 (north) */
+#define B2062_N_RXA_CTL6 B43_LP_NORTH(0x02D) /* RXA Control 6 (north) */
+#define B2062_N_RXA_CTL7 B43_LP_NORTH(0x02E) /* RXA Control 7 (north) */
+#define B2062_N_RXBB_CTL0 B43_LP_NORTH(0x02F) /* RXBB Control 0 (north) */
+#define B2062_N_RXBB_CTL1 B43_LP_NORTH(0x030) /* RXBB Control 1 (north) */
+#define B2062_N_RXBB_CTL2 B43_LP_NORTH(0x031) /* RXBB Control 2 (north) */
+#define B2062_N_RXBB_GAIN0 B43_LP_NORTH(0x032) /* RXBB Gain 0 (north) */
+#define B2062_N_RXBB_GAIN1 B43_LP_NORTH(0x033) /* RXBB Gain 1 (north) */
+#define B2062_N_RXBB_GAIN2 B43_LP_NORTH(0x034) /* RXBB Gain 2 (north) */
+#define B2062_N_RXBB_GAIN3 B43_LP_NORTH(0x035) /* RXBB Gain 3 (north) */
+#define B2062_N_RXBB_RSSI0 B43_LP_NORTH(0x036) /* RXBB RSSI 0 (north) */
+#define B2062_N_RXBB_RSSI1 B43_LP_NORTH(0x037) /* RXBB RSSI 1 (north) */
+#define B2062_N_RXBB_CALIB0 B43_LP_NORTH(0x038) /* RXBB Calibration0 (north) */
+#define B2062_N_RXBB_CALIB1 B43_LP_NORTH(0x039) /* RXBB Calibration1 (north) */
+#define B2062_N_RXBB_CALIB2 B43_LP_NORTH(0x03A) /* RXBB Calibration2 (north) */
+#define B2062_N_RXBB_BIAS0 B43_LP_NORTH(0x03B) /* RXBB Bias 0 (north) */
+#define B2062_N_RXBB_BIAS1 B43_LP_NORTH(0x03C) /* RXBB Bias 1 (north) */
+#define B2062_N_RXBB_BIAS2 B43_LP_NORTH(0x03D) /* RXBB Bias 2 (north) */
+#define B2062_N_RXBB_BIAS3 B43_LP_NORTH(0x03E) /* RXBB Bias 3 (north) */
+#define B2062_N_RXBB_BIAS4 B43_LP_NORTH(0x03F) /* RXBB Bias 4 (north) */
+#define B2062_N_RXBB_BIAS5 B43_LP_NORTH(0x040) /* RXBB Bias 5 (north) */
+#define B2062_N_RXBB_RSSI2 B43_LP_NORTH(0x041) /* RXBB RSSI 2 (north) */
+#define B2062_N_RXBB_RSSI3 B43_LP_NORTH(0x042) /* RXBB RSSI 3 (north) */
+#define B2062_N_RXBB_RSSI4 B43_LP_NORTH(0x043) /* RXBB RSSI 4 (north) */
+#define B2062_N_RXBB_RSSI5 B43_LP_NORTH(0x044) /* RXBB RSSI 5 (north) */
+#define B2062_N_TX_CTL0 B43_LP_NORTH(0x045) /* TX Control 0 (north) */
+#define B2062_N_TX_CTL1 B43_LP_NORTH(0x046) /* TX Control 1 (north) */
+#define B2062_N_TX_CTL2 B43_LP_NORTH(0x047) /* TX Control 2 (north) */
+#define B2062_N_TX_CTL3 B43_LP_NORTH(0x048) /* TX Control 3 (north) */
+#define B2062_N_TX_CTL4 B43_LP_NORTH(0x049) /* TX Control 4 (north) */
+#define B2062_N_TX_CTL5 B43_LP_NORTH(0x04A) /* TX Control 5 (north) */
+#define B2062_N_TX_CTL6 B43_LP_NORTH(0x04B) /* TX Control 6 (north) */
+#define B2062_N_TX_CTL7 B43_LP_NORTH(0x04C) /* TX Control 7 (north) */
+#define B2062_N_TX_CTL8 B43_LP_NORTH(0x04D) /* TX Control 8 (north) */
+#define B2062_N_TX_CTL9 B43_LP_NORTH(0x04E) /* TX Control 9 (north) */
+#define B2062_N_TX_CTL_A B43_LP_NORTH(0x04F) /* TX Control A (north) */
+#define B2062_N_TX_GC2G B43_LP_NORTH(0x050) /* TX GC2G (north) */
+#define B2062_N_TX_GC5G B43_LP_NORTH(0x051) /* TX GC5G (north) */
+#define B2062_N_TX_TUNE B43_LP_NORTH(0x052) /* TX Tune (north) */
+#define B2062_N_TX_PAD B43_LP_NORTH(0x053) /* TX PAD (north) */
+#define B2062_N_TX_PGA B43_LP_NORTH(0x054) /* TX PGA (north) */
+#define B2062_N_TX_PADAUX B43_LP_NORTH(0x055) /* TX PADAUX (north) */
+#define B2062_N_TX_PGAAUX B43_LP_NORTH(0x056) /* TX PGAAUX (north) */
+#define B2062_N_TSSI_CTL0 B43_LP_NORTH(0x057) /* TSSI Control 0 (north) */
+#define B2062_N_TSSI_CTL1 B43_LP_NORTH(0x058) /* TSSI Control 1 (north) */
+#define B2062_N_TSSI_CTL2 B43_LP_NORTH(0x059) /* TSSI Control 2 (north) */
+#define B2062_N_IQ_CALIB_CTL0 B43_LP_NORTH(0x05A) /* IQ Calibration Control 0 (north) */
+#define B2062_N_IQ_CALIB_CTL1 B43_LP_NORTH(0x05B) /* IQ Calibration Control 1 (north) */
+#define B2062_N_IQ_CALIB_CTL2 B43_LP_NORTH(0x05C) /* IQ Calibration Control 2 (north) */
+#define B2062_N_CALIB_TS B43_LP_NORTH(0x05D) /* Calibration TS (north) */
+#define B2062_N_CALIB_CTL0 B43_LP_NORTH(0x05E) /* Calibration Control 0 (north) */
+#define B2062_N_CALIB_CTL1 B43_LP_NORTH(0x05F) /* Calibration Control 1 (north) */
+#define B2062_N_CALIB_CTL2 B43_LP_NORTH(0x060) /* Calibration Control 2 (north) */
+#define B2062_N_CALIB_CTL3 B43_LP_NORTH(0x061) /* Calibration Control 3 (north) */
+#define B2062_N_CALIB_CTL4 B43_LP_NORTH(0x062) /* Calibration Control 4 (north) */
+#define B2062_N_CALIB_DBG0 B43_LP_NORTH(0x063) /* Calibration Debug 0 (north) */
+#define B2062_N_CALIB_DBG1 B43_LP_NORTH(0x064) /* Calibration Debug 1 (north) */
+#define B2062_N_CALIB_DBG2 B43_LP_NORTH(0x065) /* Calibration Debug 2 (north) */
+#define B2062_N_CALIB_DBG3 B43_LP_NORTH(0x066) /* Calibration Debug 3 (north) */
+#define B2062_N_PSENSE_CTL0 B43_LP_NORTH(0x069) /* PSENSE Control 0 (north) */
+#define B2062_N_PSENSE_CTL1 B43_LP_NORTH(0x06A) /* PSENSE Control 1 (north) */
+#define B2062_N_PSENSE_CTL2 B43_LP_NORTH(0x06B) /* PSENSE Control 2 (north) */
+#define B2062_N_TEST_BUF0 B43_LP_NORTH(0x06C) /* TEST BUF0 (north) */
+
+/*** Broadcom 2062 SOUTH radio registers ***/
+#define B2062_S_COMM1 B43_LP_SOUTH(0x000) /* Common 01 (south) */
+#define B2062_S_RADIO_ID_CODE B43_LP_SOUTH(0x001) /* Radio ID code (south) */
+#define B2062_S_COMM2 B43_LP_SOUTH(0x002) /* Common 02 (south) */
+#define B2062_S_COMM3 B43_LP_SOUTH(0x003) /* Common 03 (south) */
+#define B2062_S_COMM4 B43_LP_SOUTH(0x004) /* Common 04 (south) */
+#define B2062_S_COMM5 B43_LP_SOUTH(0x005) /* Common 05 (south) */
+#define B2062_S_COMM6 B43_LP_SOUTH(0x006) /* Common 06 (south) */
+#define B2062_S_COMM7 B43_LP_SOUTH(0x007) /* Common 07 (south) */
+#define B2062_S_COMM8 B43_LP_SOUTH(0x008) /* Common 08 (south) */
+#define B2062_S_COMM9 B43_LP_SOUTH(0x009) /* Common 09 (south) */
+#define B2062_S_COMM10 B43_LP_SOUTH(0x00A) /* Common 10 (south) */
+#define B2062_S_COMM11 B43_LP_SOUTH(0x00B) /* Common 11 (south) */
+#define B2062_S_COMM12 B43_LP_SOUTH(0x00C) /* Common 12 (south) */
+#define B2062_S_COMM13 B43_LP_SOUTH(0x00D) /* Common 13 (south) */
+#define B2062_S_COMM14 B43_LP_SOUTH(0x00E) /* Common 14 (south) */
+#define B2062_S_COMM15 B43_LP_SOUTH(0x00F) /* Common 15 (south) */
+#define B2062_S_PDS_CTL0 B43_LP_SOUTH(0x010) /* PDS Control 0 (south) */
+#define B2062_S_PDS_CTL1 B43_LP_SOUTH(0x011) /* PDS Control 1 (south) */
+#define B2062_S_PDS_CTL2 B43_LP_SOUTH(0x012) /* PDS Control 2 (south) */
+#define B2062_S_PDS_CTL3 B43_LP_SOUTH(0x013) /* PDS Control 3 (south) */
+#define B2062_S_BG_CTL0 B43_LP_SOUTH(0x014) /* BG Control 0 (south) */
+#define B2062_S_BG_CTL1 B43_LP_SOUTH(0x015) /* BG Control 1 (south) */
+#define B2062_S_BG_CTL2 B43_LP_SOUTH(0x016) /* BG Control 2 (south) */
+#define B2062_S_LGENG_CTL0 B43_LP_SOUTH(0x017) /* LGENG Control 00 (south) */
+#define B2062_S_LGENG_CTL1 B43_LP_SOUTH(0x018) /* LGENG Control 01 (south) */
+#define B2062_S_LGENG_CTL2 B43_LP_SOUTH(0x019) /* LGENG Control 02 (south) */
+#define B2062_S_LGENG_CTL3 B43_LP_SOUTH(0x01A) /* LGENG Control 03 (south) */
+#define B2062_S_LGENG_CTL4 B43_LP_SOUTH(0x01B) /* LGENG Control 04 (south) */
+#define B2062_S_LGENG_CTL5 B43_LP_SOUTH(0x01C) /* LGENG Control 05 (south) */
+#define B2062_S_LGENG_CTL6 B43_LP_SOUTH(0x01D) /* LGENG Control 06 (south) */
+#define B2062_S_LGENG_CTL7 B43_LP_SOUTH(0x01E) /* LGENG Control 07 (south) */
+#define B2062_S_LGENG_CTL8 B43_LP_SOUTH(0x01F) /* LGENG Control 08 (south) */
+#define B2062_S_LGENG_CTL9 B43_LP_SOUTH(0x020) /* LGENG Control 09 (south) */
+#define B2062_S_LGENG_CTL10 B43_LP_SOUTH(0x021) /* LGENG Control 10 (south) */
+#define B2062_S_LGENG_CTL11 B43_LP_SOUTH(0x022) /* LGENG Control 11 (south) */
+#define B2062_S_REFPLL_CTL0 B43_LP_SOUTH(0x023) /* REFPLL Control 00 (south) */
+#define B2062_S_REFPLL_CTL1 B43_LP_SOUTH(0x024) /* REFPLL Control 01 (south) */
+#define B2062_S_REFPLL_CTL2 B43_LP_SOUTH(0x025) /* REFPLL Control 02 (south) */
+#define B2062_S_REFPLL_CTL3 B43_LP_SOUTH(0x026) /* REFPLL Control 03 (south) */
+#define B2062_S_REFPLL_CTL4 B43_LP_SOUTH(0x027) /* REFPLL Control 04 (south) */
+#define B2062_S_REFPLL_CTL5 B43_LP_SOUTH(0x028) /* REFPLL Control 05 (south) */
+#define B2062_S_REFPLL_CTL6 B43_LP_SOUTH(0x029) /* REFPLL Control 06 (south) */
+#define B2062_S_REFPLL_CTL7 B43_LP_SOUTH(0x02A) /* REFPLL Control 07 (south) */
+#define B2062_S_REFPLL_CTL8 B43_LP_SOUTH(0x02B) /* REFPLL Control 08 (south) */
+#define B2062_S_REFPLL_CTL9 B43_LP_SOUTH(0x02C) /* REFPLL Control 09 (south) */
+#define B2062_S_REFPLL_CTL10 B43_LP_SOUTH(0x02D) /* REFPLL Control 10 (south) */
+#define B2062_S_REFPLL_CTL11 B43_LP_SOUTH(0x02E) /* REFPLL Control 11 (south) */
+#define B2062_S_REFPLL_CTL12 B43_LP_SOUTH(0x02F) /* REFPLL Control 12 (south) */
+#define B2062_S_REFPLL_CTL13 B43_LP_SOUTH(0x030) /* REFPLL Control 13 (south) */
+#define B2062_S_REFPLL_CTL14 B43_LP_SOUTH(0x031) /* REFPLL Control 14 (south) */
+#define B2062_S_REFPLL_CTL15 B43_LP_SOUTH(0x032) /* REFPLL Control 15 (south) */
+#define B2062_S_REFPLL_CTL16 B43_LP_SOUTH(0x033) /* REFPLL Control 16 (south) */
+#define B2062_S_RFPLL_CTL0 B43_LP_SOUTH(0x034) /* RFPLL Control 00 (south) */
+#define B2062_S_RFPLL_CTL1 B43_LP_SOUTH(0x035) /* RFPLL Control 01 (south) */
+#define B2062_S_RFPLL_CTL2 B43_LP_SOUTH(0x036) /* RFPLL Control 02 (south) */
+#define B2062_S_RFPLL_CTL3 B43_LP_SOUTH(0x037) /* RFPLL Control 03 (south) */
+#define B2062_S_RFPLL_CTL4 B43_LP_SOUTH(0x038) /* RFPLL Control 04 (south) */
+#define B2062_S_RFPLL_CTL5 B43_LP_SOUTH(0x039) /* RFPLL Control 05 (south) */
+#define B2062_S_RFPLL_CTL6 B43_LP_SOUTH(0x03A) /* RFPLL Control 06 (south) */
+#define B2062_S_RFPLL_CTL7 B43_LP_SOUTH(0x03B) /* RFPLL Control 07 (south) */
+#define B2062_S_RFPLL_CTL8 B43_LP_SOUTH(0x03C) /* RFPLL Control 08 (south) */
+#define B2062_S_RFPLL_CTL9 B43_LP_SOUTH(0x03D) /* RFPLL Control 09 (south) */
+#define B2062_S_RFPLL_CTL10 B43_LP_SOUTH(0x03E) /* RFPLL Control 10 (south) */
+#define B2062_S_RFPLL_CTL11 B43_LP_SOUTH(0x03F) /* RFPLL Control 11 (south) */
+#define B2062_S_RFPLL_CTL12 B43_LP_SOUTH(0x040) /* RFPLL Control 12 (south) */
+#define B2062_S_RFPLL_CTL13 B43_LP_SOUTH(0x041) /* RFPLL Control 13 (south) */
+#define B2062_S_RFPLL_CTL14 B43_LP_SOUTH(0x042) /* RFPLL Control 14 (south) */
+#define B2062_S_RFPLL_CTL15 B43_LP_SOUTH(0x043) /* RFPLL Control 15 (south) */
+#define B2062_S_RFPLL_CTL16 B43_LP_SOUTH(0x044) /* RFPLL Control 16 (south) */
+#define B2062_S_RFPLL_CTL17 B43_LP_SOUTH(0x045) /* RFPLL Control 17 (south) */
+#define B2062_S_RFPLL_CTL18 B43_LP_SOUTH(0x046) /* RFPLL Control 18 (south) */
+#define B2062_S_RFPLL_CTL19 B43_LP_SOUTH(0x047) /* RFPLL Control 19 (south) */
+#define B2062_S_RFPLL_CTL20 B43_LP_SOUTH(0x048) /* RFPLL Control 20 (south) */
+#define B2062_S_RFPLL_CTL21 B43_LP_SOUTH(0x049) /* RFPLL Control 21 (south) */
+#define B2062_S_RFPLL_CTL22 B43_LP_SOUTH(0x04A) /* RFPLL Control 22 (south) */
+#define B2062_S_RFPLL_CTL23 B43_LP_SOUTH(0x04B) /* RFPLL Control 23 (south) */
+#define B2062_S_RFPLL_CTL24 B43_LP_SOUTH(0x04C) /* RFPLL Control 24 (south) */
+#define B2062_S_RFPLL_CTL25 B43_LP_SOUTH(0x04D) /* RFPLL Control 25 (south) */
+#define B2062_S_RFPLL_CTL26 B43_LP_SOUTH(0x04E) /* RFPLL Control 26 (south) */
+#define B2062_S_RFPLL_CTL27 B43_LP_SOUTH(0x04F) /* RFPLL Control 27 (south) */
+#define B2062_S_RFPLL_CTL28 B43_LP_SOUTH(0x050) /* RFPLL Control 28 (south) */
+#define B2062_S_RFPLL_CTL29 B43_LP_SOUTH(0x051) /* RFPLL Control 29 (south) */
+#define B2062_S_RFPLL_CTL30 B43_LP_SOUTH(0x052) /* RFPLL Control 30 (south) */
+#define B2062_S_RFPLL_CTL31 B43_LP_SOUTH(0x053) /* RFPLL Control 31 (south) */
+#define B2062_S_RFPLL_CTL32 B43_LP_SOUTH(0x054) /* RFPLL Control 32 (south) */
+#define B2062_S_RFPLL_CTL33 B43_LP_SOUTH(0x055) /* RFPLL Control 33 (south) */
+#define B2062_S_RFPLL_CTL34 B43_LP_SOUTH(0x056) /* RFPLL Control 34 (south) */
+#define B2062_S_RXG_CNT0 B43_LP_SOUTH(0x057) /* RXG Counter 00 (south) */
+#define B2062_S_RXG_CNT1 B43_LP_SOUTH(0x058) /* RXG Counter 01 (south) */
+#define B2062_S_RXG_CNT2 B43_LP_SOUTH(0x059) /* RXG Counter 02 (south) */
+#define B2062_S_RXG_CNT3 B43_LP_SOUTH(0x05A) /* RXG Counter 03 (south) */
+#define B2062_S_RXG_CNT4 B43_LP_SOUTH(0x05B) /* RXG Counter 04 (south) */
+#define B2062_S_RXG_CNT5 B43_LP_SOUTH(0x05C) /* RXG Counter 05 (south) */
+#define B2062_S_RXG_CNT6 B43_LP_SOUTH(0x05D) /* RXG Counter 06 (south) */
+#define B2062_S_RXG_CNT7 B43_LP_SOUTH(0x05E) /* RXG Counter 07 (south) */
+#define B2062_S_RXG_CNT8 B43_LP_SOUTH(0x05F) /* RXG Counter 08 (south) */
+#define B2062_S_RXG_CNT9 B43_LP_SOUTH(0x060) /* RXG Counter 09 (south) */
+#define B2062_S_RXG_CNT10 B43_LP_SOUTH(0x061) /* RXG Counter 10 (south) */
+#define B2062_S_RXG_CNT11 B43_LP_SOUTH(0x062) /* RXG Counter 11 (south) */
+#define B2062_S_RXG_CNT12 B43_LP_SOUTH(0x063) /* RXG Counter 12 (south) */
+#define B2062_S_RXG_CNT13 B43_LP_SOUTH(0x064) /* RXG Counter 13 (south) */
+#define B2062_S_RXG_CNT14 B43_LP_SOUTH(0x065) /* RXG Counter 14 (south) */
+#define B2062_S_RXG_CNT15 B43_LP_SOUTH(0x066) /* RXG Counter 15 (south) */
+#define B2062_S_RXG_CNT16 B43_LP_SOUTH(0x067) /* RXG Counter 16 (south) */
+#define B2062_S_RXG_CNT17 B43_LP_SOUTH(0x068) /* RXG Counter 17 (south) */
+
+
+
+/*** Broadcom 2063 radio registers ***/
+#define B2063_RADIO_ID_CODE B43_LP_RADIO(0x001) /* Radio ID code */
+#define B2063_COMM1 B43_LP_RADIO(0x000) /* Common 01 */
+#define B2063_COMM2 B43_LP_RADIO(0x002) /* Common 02 */
+#define B2063_COMM3 B43_LP_RADIO(0x003) /* Common 03 */
+#define B2063_COMM4 B43_LP_RADIO(0x004) /* Common 04 */
+#define B2063_COMM5 B43_LP_RADIO(0x005) /* Common 05 */
+#define B2063_COMM6 B43_LP_RADIO(0x006) /* Common 06 */
+#define B2063_COMM7 B43_LP_RADIO(0x007) /* Common 07 */
+#define B2063_COMM8 B43_LP_RADIO(0x008) /* Common 08 */
+#define B2063_COMM9 B43_LP_RADIO(0x009) /* Common 09 */
+#define B2063_COMM10 B43_LP_RADIO(0x00A) /* Common 10 */
+#define B2063_COMM11 B43_LP_RADIO(0x00B) /* Common 11 */
+#define B2063_COMM12 B43_LP_RADIO(0x00C) /* Common 12 */
+#define B2063_COMM13 B43_LP_RADIO(0x00D) /* Common 13 */
+#define B2063_COMM14 B43_LP_RADIO(0x00E) /* Common 14 */
+#define B2063_COMM15 B43_LP_RADIO(0x00F) /* Common 15 */
+#define B2063_COMM16 B43_LP_RADIO(0x010) /* Common 16 */
+#define B2063_COMM17 B43_LP_RADIO(0x011) /* Common 17 */
+#define B2063_COMM18 B43_LP_RADIO(0x012) /* Common 18 */
+#define B2063_COMM19 B43_LP_RADIO(0x013) /* Common 19 */
+#define B2063_COMM20 B43_LP_RADIO(0x014) /* Common 20 */
+#define B2063_COMM21 B43_LP_RADIO(0x015) /* Common 21 */
+#define B2063_COMM22 B43_LP_RADIO(0x016) /* Common 22 */
+#define B2063_COMM23 B43_LP_RADIO(0x017) /* Common 23 */
+#define B2063_COMM24 B43_LP_RADIO(0x018) /* Common 24 */
+#define B2063_PWR_SWITCH_CTL B43_LP_RADIO(0x019) /* POWER SWITCH Control */
+#define B2063_PLL_SP1 B43_LP_RADIO(0x01A) /* PLL SP 1 */
+#define B2063_PLL_SP2 B43_LP_RADIO(0x01B) /* PLL SP 2 */
+#define B2063_LOGEN_SP1 B43_LP_RADIO(0x01C) /* LOGEN SP 1 */
+#define B2063_LOGEN_SP2 B43_LP_RADIO(0x01D) /* LOGEN SP 2 */
+#define B2063_LOGEN_SP3 B43_LP_RADIO(0x01E) /* LOGEN SP 3 */
+#define B2063_LOGEN_SP4 B43_LP_RADIO(0x01F) /* LOGEN SP 4 */
+#define B2063_LOGEN_SP5 B43_LP_RADIO(0x020) /* LOGEN SP 5 */
+#define B2063_G_RX_SP1 B43_LP_RADIO(0x021) /* G RX SP 1 */
+#define B2063_G_RX_SP2 B43_LP_RADIO(0x022) /* G RX SP 2 */
+#define B2063_G_RX_SP3 B43_LP_RADIO(0x023) /* G RX SP 3 */
+#define B2063_G_RX_SP4 B43_LP_RADIO(0x024) /* G RX SP 4 */
+#define B2063_G_RX_SP5 B43_LP_RADIO(0x025) /* G RX SP 5 */
+#define B2063_G_RX_SP6 B43_LP_RADIO(0x026) /* G RX SP 6 */
+#define B2063_G_RX_SP7 B43_LP_RADIO(0x027) /* G RX SP 7 */
+#define B2063_G_RX_SP8 B43_LP_RADIO(0x028) /* G RX SP 8 */
+#define B2063_G_RX_SP9 B43_LP_RADIO(0x029) /* G RX SP 9 */
+#define B2063_G_RX_SP10 B43_LP_RADIO(0x02A) /* G RX SP 10 */
+#define B2063_G_RX_SP11 B43_LP_RADIO(0x02B) /* G RX SP 11 */
+#define B2063_A_RX_SP1 B43_LP_RADIO(0x02C) /* A RX SP 1 */
+#define B2063_A_RX_SP2 B43_LP_RADIO(0x02D) /* A RX SP 2 */
+#define B2063_A_RX_SP3 B43_LP_RADIO(0x02E) /* A RX SP 3 */
+#define B2063_A_RX_SP4 B43_LP_RADIO(0x02F) /* A RX SP 4 */
+#define B2063_A_RX_SP5 B43_LP_RADIO(0x030) /* A RX SP 5 */
+#define B2063_A_RX_SP6 B43_LP_RADIO(0x031) /* A RX SP 6 */
+#define B2063_A_RX_SP7 B43_LP_RADIO(0x032) /* A RX SP 7 */
+#define B2063_RX_BB_SP1 B43_LP_RADIO(0x033) /* RX BB SP 1 */
+#define B2063_RX_BB_SP2 B43_LP_RADIO(0x034) /* RX BB SP 2 */
+#define B2063_RX_BB_SP3 B43_LP_RADIO(0x035) /* RX BB SP 3 */
+#define B2063_RX_BB_SP4 B43_LP_RADIO(0x036) /* RX BB SP 4 */
+#define B2063_RX_BB_SP5 B43_LP_RADIO(0x037) /* RX BB SP 5 */
+#define B2063_RX_BB_SP6 B43_LP_RADIO(0x038) /* RX BB SP 6 */
+#define B2063_RX_BB_SP7 B43_LP_RADIO(0x039) /* RX BB SP 7 */
+#define B2063_RX_BB_SP8 B43_LP_RADIO(0x03A) /* RX BB SP 8 */
+#define B2063_TX_RF_SP1 B43_LP_RADIO(0x03B) /* TX RF SP 1 */
+#define B2063_TX_RF_SP2 B43_LP_RADIO(0x03C) /* TX RF SP 2 */
+#define B2063_TX_RF_SP3 B43_LP_RADIO(0x03D) /* TX RF SP 3 */
+#define B2063_TX_RF_SP4 B43_LP_RADIO(0x03E) /* TX RF SP 4 */
+#define B2063_TX_RF_SP5 B43_LP_RADIO(0x03F) /* TX RF SP 5 */
+#define B2063_TX_RF_SP6 B43_LP_RADIO(0x040) /* TX RF SP 6 */
+#define B2063_TX_RF_SP7 B43_LP_RADIO(0x041) /* TX RF SP 7 */
+#define B2063_TX_RF_SP8 B43_LP_RADIO(0x042) /* TX RF SP 8 */
+#define B2063_TX_RF_SP9 B43_LP_RADIO(0x043) /* TX RF SP 9 */
+#define B2063_TX_RF_SP10 B43_LP_RADIO(0x044) /* TX RF SP 10 */
+#define B2063_TX_RF_SP11 B43_LP_RADIO(0x045) /* TX RF SP 11 */
+#define B2063_TX_RF_SP12 B43_LP_RADIO(0x046) /* TX RF SP 12 */
+#define B2063_TX_RF_SP13 B43_LP_RADIO(0x047) /* TX RF SP 13 */
+#define B2063_TX_RF_SP14 B43_LP_RADIO(0x048) /* TX RF SP 14 */
+#define B2063_TX_RF_SP15 B43_LP_RADIO(0x049) /* TX RF SP 15 */
+#define B2063_TX_RF_SP16 B43_LP_RADIO(0x04A) /* TX RF SP 16 */
+#define B2063_TX_RF_SP17 B43_LP_RADIO(0x04B) /* TX RF SP 17 */
+#define B2063_PA_SP1 B43_LP_RADIO(0x04C) /* PA SP 1 */
+#define B2063_PA_SP2 B43_LP_RADIO(0x04D) /* PA SP 2 */
+#define B2063_PA_SP3 B43_LP_RADIO(0x04E) /* PA SP 3 */
+#define B2063_PA_SP4 B43_LP_RADIO(0x04F) /* PA SP 4 */
+#define B2063_PA_SP5 B43_LP_RADIO(0x050) /* PA SP 5 */
+#define B2063_PA_SP6 B43_LP_RADIO(0x051) /* PA SP 6 */
+#define B2063_PA_SP7 B43_LP_RADIO(0x052) /* PA SP 7 */
+#define B2063_TX_BB_SP1 B43_LP_RADIO(0x053) /* TX BB SP 1 */
+#define B2063_TX_BB_SP2 B43_LP_RADIO(0x054) /* TX BB SP 2 */
+#define B2063_TX_BB_SP3 B43_LP_RADIO(0x055) /* TX BB SP 3 */
+#define B2063_REG_SP1 B43_LP_RADIO(0x056) /* REG SP 1 */
+#define B2063_BANDGAP_CTL1 B43_LP_RADIO(0x057) /* BANDGAP Control 1 */
+#define B2063_BANDGAP_CTL2 B43_LP_RADIO(0x058) /* BANDGAP Control 2 */
+#define B2063_LPO_CTL1 B43_LP_RADIO(0x059) /* LPO Control 1 */
+#define B2063_RC_CALIB_CTL1 B43_LP_RADIO(0x05A) /* RC Calibration Control 1 */
+#define B2063_RC_CALIB_CTL2 B43_LP_RADIO(0x05B) /* RC Calibration Control 2 */
+#define B2063_RC_CALIB_CTL3 B43_LP_RADIO(0x05C) /* RC Calibration Control 3 */
+#define B2063_RC_CALIB_CTL4 B43_LP_RADIO(0x05D) /* RC Calibration Control 4 */
+#define B2063_RC_CALIB_CTL5 B43_LP_RADIO(0x05E) /* RC Calibration Control 5 */
+#define B2063_RC_CALIB_CTL6 B43_LP_RADIO(0x05F) /* RC Calibration Control 6 */
+#define B2063_RC_CALIB_CTL7 B43_LP_RADIO(0x060) /* RC Calibration Control 7 */
+#define B2063_RC_CALIB_CTL8 B43_LP_RADIO(0x061) /* RC Calibration Control 8 */
+#define B2063_RC_CALIB_CTL9 B43_LP_RADIO(0x062) /* RC Calibration Control 9 */
+#define B2063_RC_CALIB_CTL10 B43_LP_RADIO(0x063) /* RC Calibration Control 10 */
+#define B2063_PLL_JTAG_CALNRST B43_LP_RADIO(0x064) /* PLL JTAG CALNRST */
+#define B2063_PLL_JTAG_IN_PLL1 B43_LP_RADIO(0x065) /* PLL JTAG IN PLL 1 */
+#define B2063_PLL_JTAG_IN_PLL2 B43_LP_RADIO(0x066) /* PLL JTAG IN PLL 2 */
+#define B2063_PLL_JTAG_PLL_CP1 B43_LP_RADIO(0x067) /* PLL JTAG PLL CP 1 */
+#define B2063_PLL_JTAG_PLL_CP2 B43_LP_RADIO(0x068) /* PLL JTAG PLL CP 2 */
+#define B2063_PLL_JTAG_PLL_CP3 B43_LP_RADIO(0x069) /* PLL JTAG PLL CP 3 */
+#define B2063_PLL_JTAG_PLL_CP4 B43_LP_RADIO(0x06A) /* PLL JTAG PLL CP 4 */
+#define B2063_PLL_JTAG_PLL_CTL1 B43_LP_RADIO(0x06B) /* PLL JTAG PLL Control 1 */
+#define B2063_PLL_JTAG_PLL_LF1 B43_LP_RADIO(0x06C) /* PLL JTAG PLL LF 1 */
+#define B2063_PLL_JTAG_PLL_LF2 B43_LP_RADIO(0x06D) /* PLL JTAG PLL LF 2 */
+#define B2063_PLL_JTAG_PLL_LF3 B43_LP_RADIO(0x06E) /* PLL JTAG PLL LF 3 */
+#define B2063_PLL_JTAG_PLL_LF4 B43_LP_RADIO(0x06F) /* PLL JTAG PLL LF 4 */
+#define B2063_PLL_JTAG_PLL_SG1 B43_LP_RADIO(0x070) /* PLL JTAG PLL SG 1 */
+#define B2063_PLL_JTAG_PLL_SG2 B43_LP_RADIO(0x071) /* PLL JTAG PLL SG 2 */
+#define B2063_PLL_JTAG_PLL_SG3 B43_LP_RADIO(0x072) /* PLL JTAG PLL SG 3 */
+#define B2063_PLL_JTAG_PLL_SG4 B43_LP_RADIO(0x073) /* PLL JTAG PLL SG 4 */
+#define B2063_PLL_JTAG_PLL_SG5 B43_LP_RADIO(0x074) /* PLL JTAG PLL SG 5 */
+#define B2063_PLL_JTAG_PLL_VCO1 B43_LP_RADIO(0x075) /* PLL JTAG PLL VCO 1 */
+#define B2063_PLL_JTAG_PLL_VCO2 B43_LP_RADIO(0x076) /* PLL JTAG PLL VCO 2 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB1 B43_LP_RADIO(0x077) /* PLL JTAG PLL VCO Calibration 1 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB2 B43_LP_RADIO(0x078) /* PLL JTAG PLL VCO Calibration 2 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB3 B43_LP_RADIO(0x079) /* PLL JTAG PLL VCO Calibration 3 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB4 B43_LP_RADIO(0x07A) /* PLL JTAG PLL VCO Calibration 4 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB5 B43_LP_RADIO(0x07B) /* PLL JTAG PLL VCO Calibration 5 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB6 B43_LP_RADIO(0x07C) /* PLL JTAG PLL VCO Calibration 6 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB7 B43_LP_RADIO(0x07D) /* PLL JTAG PLL VCO Calibration 7 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB8 B43_LP_RADIO(0x07E) /* PLL JTAG PLL VCO Calibration 8 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB9 B43_LP_RADIO(0x07F) /* PLL JTAG PLL VCO Calibration 9 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB10 B43_LP_RADIO(0x080) /* PLL JTAG PLL VCO Calibration 10 */
+#define B2063_PLL_JTAG_PLL_XTAL_12 B43_LP_RADIO(0x081) /* PLL JTAG PLL XTAL 1 2 */
+#define B2063_PLL_JTAG_PLL_XTAL3 B43_LP_RADIO(0x082) /* PLL JTAG PLL XTAL 3 */
+#define B2063_LOGEN_ACL1 B43_LP_RADIO(0x083) /* LOGEN ACL 1 */
+#define B2063_LOGEN_ACL2 B43_LP_RADIO(0x084) /* LOGEN ACL 2 */
+#define B2063_LOGEN_ACL3 B43_LP_RADIO(0x085) /* LOGEN ACL 3 */
+#define B2063_LOGEN_ACL4 B43_LP_RADIO(0x086) /* LOGEN ACL 4 */
+#define B2063_LOGEN_ACL5 B43_LP_RADIO(0x087) /* LOGEN ACL 5 */
+#define B2063_LO_CALIB_INPUTS B43_LP_RADIO(0x088) /* LO Calibration INPUTS */
+#define B2063_LO_CALIB_CTL1 B43_LP_RADIO(0x089) /* LO Calibration Control 1 */
+#define B2063_LO_CALIB_CTL2 B43_LP_RADIO(0x08A) /* LO Calibration Control 2 */
+#define B2063_LO_CALIB_CTL3 B43_LP_RADIO(0x08B) /* LO Calibration Control 3 */
+#define B2063_LO_CALIB_WAITCNT B43_LP_RADIO(0x08C) /* LO Calibration WAITCNT */
+#define B2063_LO_CALIB_OVR1 B43_LP_RADIO(0x08D) /* LO Calibration OVR 1 */
+#define B2063_LO_CALIB_OVR2 B43_LP_RADIO(0x08E) /* LO Calibration OVR 2 */
+#define B2063_LO_CALIB_OVAL1 B43_LP_RADIO(0x08F) /* LO Calibration OVAL 1 */
+#define B2063_LO_CALIB_OVAL2 B43_LP_RADIO(0x090) /* LO Calibration OVAL 2 */
+#define B2063_LO_CALIB_OVAL3 B43_LP_RADIO(0x091) /* LO Calibration OVAL 3 */
+#define B2063_LO_CALIB_OVAL4 B43_LP_RADIO(0x092) /* LO Calibration OVAL 4 */
+#define B2063_LO_CALIB_OVAL5 B43_LP_RADIO(0x093) /* LO Calibration OVAL 5 */
+#define B2063_LO_CALIB_OVAL6 B43_LP_RADIO(0x094) /* LO Calibration OVAL 6 */
+#define B2063_LO_CALIB_OVAL7 B43_LP_RADIO(0x095) /* LO Calibration OVAL 7 */
+#define B2063_LO_CALIB_CALVLD1 B43_LP_RADIO(0x096) /* LO Calibration CALVLD 1 */
+#define B2063_LO_CALIB_CALVLD2 B43_LP_RADIO(0x097) /* LO Calibration CALVLD 2 */
+#define B2063_LO_CALIB_CVAL1 B43_LP_RADIO(0x098) /* LO Calibration CVAL 1 */
+#define B2063_LO_CALIB_CVAL2 B43_LP_RADIO(0x099) /* LO Calibration CVAL 2 */
+#define B2063_LO_CALIB_CVAL3 B43_LP_RADIO(0x09A) /* LO Calibration CVAL 3 */
+#define B2063_LO_CALIB_CVAL4 B43_LP_RADIO(0x09B) /* LO Calibration CVAL 4 */
+#define B2063_LO_CALIB_CVAL5 B43_LP_RADIO(0x09C) /* LO Calibration CVAL 5 */
+#define B2063_LO_CALIB_CVAL6 B43_LP_RADIO(0x09D) /* LO Calibration CVAL 6 */
+#define B2063_LO_CALIB_CVAL7 B43_LP_RADIO(0x09E) /* LO Calibration CVAL 7 */
+#define B2063_LOGEN_CALIB_EN B43_LP_RADIO(0x09F) /* LOGEN Calibration EN */
+#define B2063_LOGEN_PEAKDET1 B43_LP_RADIO(0x0A0) /* LOGEN PEAKDET 1 */
+#define B2063_LOGEN_RCCR1 B43_LP_RADIO(0x0A1) /* LOGEN RCCR 1 */
+#define B2063_LOGEN_VCOBUF1 B43_LP_RADIO(0x0A2) /* LOGEN VCOBUF 1 */
+#define B2063_LOGEN_MIXER1 B43_LP_RADIO(0x0A3) /* LOGEN MIXER 1 */
+#define B2063_LOGEN_MIXER2 B43_LP_RADIO(0x0A4) /* LOGEN MIXER 2 */
+#define B2063_LOGEN_BUF1 B43_LP_RADIO(0x0A5) /* LOGEN BUF 1 */
+#define B2063_LOGEN_BUF2 B43_LP_RADIO(0x0A6) /* LOGEN BUF 2 */
+#define B2063_LOGEN_DIV1 B43_LP_RADIO(0x0A7) /* LOGEN DIV 1 */
+#define B2063_LOGEN_DIV2 B43_LP_RADIO(0x0A8) /* LOGEN DIV 2 */
+#define B2063_LOGEN_DIV3 B43_LP_RADIO(0x0A9) /* LOGEN DIV 3 */
+#define B2063_LOGEN_CBUFRX1 B43_LP_RADIO(0x0AA) /* LOGEN CBUFRX 1 */
+#define B2063_LOGEN_CBUFRX2 B43_LP_RADIO(0x0AB) /* LOGEN CBUFRX 2 */
+#define B2063_LOGEN_CBUFTX1 B43_LP_RADIO(0x0AC) /* LOGEN CBUFTX 1 */
+#define B2063_LOGEN_CBUFTX2 B43_LP_RADIO(0x0AD) /* LOGEN CBUFTX 2 */
+#define B2063_LOGEN_IDAC1 B43_LP_RADIO(0x0AE) /* LOGEN IDAC 1 */
+#define B2063_LOGEN_SPARE1 B43_LP_RADIO(0x0AF) /* LOGEN SPARE 1 */
+#define B2063_LOGEN_SPARE2 B43_LP_RADIO(0x0B0) /* LOGEN SPARE 2 */
+#define B2063_LOGEN_SPARE3 B43_LP_RADIO(0x0B1) /* LOGEN SPARE 3 */
+#define B2063_G_RX_1ST1 B43_LP_RADIO(0x0B2) /* G RX 1ST 1 */
+#define B2063_G_RX_1ST2 B43_LP_RADIO(0x0B3) /* G RX 1ST 2 */
+#define B2063_G_RX_1ST3 B43_LP_RADIO(0x0B4) /* G RX 1ST 3 */
+#define B2063_G_RX_2ND1 B43_LP_RADIO(0x0B5) /* G RX 2ND 1 */
+#define B2063_G_RX_2ND2 B43_LP_RADIO(0x0B6) /* G RX 2ND 2 */
+#define B2063_G_RX_2ND3 B43_LP_RADIO(0x0B7) /* G RX 2ND 3 */
+#define B2063_G_RX_2ND4 B43_LP_RADIO(0x0B8) /* G RX 2ND 4 */
+#define B2063_G_RX_2ND5 B43_LP_RADIO(0x0B9) /* G RX 2ND 5 */
+#define B2063_G_RX_2ND6 B43_LP_RADIO(0x0BA) /* G RX 2ND 6 */
+#define B2063_G_RX_2ND7 B43_LP_RADIO(0x0BB) /* G RX 2ND 7 */
+#define B2063_G_RX_2ND8 B43_LP_RADIO(0x0BC) /* G RX 2ND 8 */
+#define B2063_G_RX_PS1 B43_LP_RADIO(0x0BD) /* G RX PS 1 */
+#define B2063_G_RX_PS2 B43_LP_RADIO(0x0BE) /* G RX PS 2 */
+#define B2063_G_RX_PS3 B43_LP_RADIO(0x0BF) /* G RX PS 3 */
+#define B2063_G_RX_PS4 B43_LP_RADIO(0x0C0) /* G RX PS 4 */
+#define B2063_G_RX_PS5 B43_LP_RADIO(0x0C1) /* G RX PS 5 */
+#define B2063_G_RX_MIX1 B43_LP_RADIO(0x0C2) /* G RX MIX 1 */
+#define B2063_G_RX_MIX2 B43_LP_RADIO(0x0C3) /* G RX MIX 2 */
+#define B2063_G_RX_MIX3 B43_LP_RADIO(0x0C4) /* G RX MIX 3 */
+#define B2063_G_RX_MIX4 B43_LP_RADIO(0x0C5) /* G RX MIX 4 */
+#define B2063_G_RX_MIX5 B43_LP_RADIO(0x0C6) /* G RX MIX 5 */
+#define B2063_G_RX_MIX6 B43_LP_RADIO(0x0C7) /* G RX MIX 6 */
+#define B2063_G_RX_MIX7 B43_LP_RADIO(0x0C8) /* G RX MIX 7 */
+#define B2063_G_RX_MIX8 B43_LP_RADIO(0x0C9) /* G RX MIX 8 */
+#define B2063_G_RX_PDET1 B43_LP_RADIO(0x0CA) /* G RX PDET 1 */
+#define B2063_G_RX_SPARES1 B43_LP_RADIO(0x0CB) /* G RX SPARES 1 */
+#define B2063_G_RX_SPARES2 B43_LP_RADIO(0x0CC) /* G RX SPARES 2 */
+#define B2063_G_RX_SPARES3 B43_LP_RADIO(0x0CD) /* G RX SPARES 3 */
+#define B2063_A_RX_1ST1 B43_LP_RADIO(0x0CE) /* A RX 1ST 1 */
+#define B2063_A_RX_1ST2 B43_LP_RADIO(0x0CF) /* A RX 1ST 2 */
+#define B2063_A_RX_1ST3 B43_LP_RADIO(0x0D0) /* A RX 1ST 3 */
+#define B2063_A_RX_1ST4 B43_LP_RADIO(0x0D1) /* A RX 1ST 4 */
+#define B2063_A_RX_1ST5 B43_LP_RADIO(0x0D2) /* A RX 1ST 5 */
+#define B2063_A_RX_2ND1 B43_LP_RADIO(0x0D3) /* A RX 2ND 1 */
+#define B2063_A_RX_2ND2 B43_LP_RADIO(0x0D4) /* A RX 2ND 2 */
+#define B2063_A_RX_2ND3 B43_LP_RADIO(0x0D5) /* A RX 2ND 3 */
+#define B2063_A_RX_2ND4 B43_LP_RADIO(0x0D6) /* A RX 2ND 4 */
+#define B2063_A_RX_2ND5 B43_LP_RADIO(0x0D7) /* A RX 2ND 5 */
+#define B2063_A_RX_2ND6 B43_LP_RADIO(0x0D8) /* A RX 2ND 6 */
+#define B2063_A_RX_2ND7 B43_LP_RADIO(0x0D9) /* A RX 2ND 7 */
+#define B2063_A_RX_PS1 B43_LP_RADIO(0x0DA) /* A RX PS 1 */
+#define B2063_A_RX_PS2 B43_LP_RADIO(0x0DB) /* A RX PS 2 */
+#define B2063_A_RX_PS3 B43_LP_RADIO(0x0DC) /* A RX PS 3 */
+#define B2063_A_RX_PS4 B43_LP_RADIO(0x0DD) /* A RX PS 4 */
+#define B2063_A_RX_PS5 B43_LP_RADIO(0x0DE) /* A RX PS 5 */
+#define B2063_A_RX_PS6 B43_LP_RADIO(0x0DF) /* A RX PS 6 */
+#define B2063_A_RX_MIX1 B43_LP_RADIO(0x0E0) /* A RX MIX 1 */
+#define B2063_A_RX_MIX2 B43_LP_RADIO(0x0E1) /* A RX MIX 2 */
+#define B2063_A_RX_MIX3 B43_LP_RADIO(0x0E2) /* A RX MIX 3 */
+#define B2063_A_RX_MIX4 B43_LP_RADIO(0x0E3) /* A RX MIX 4 */
+#define B2063_A_RX_MIX5 B43_LP_RADIO(0x0E4) /* A RX MIX 5 */
+#define B2063_A_RX_MIX6 B43_LP_RADIO(0x0E5) /* A RX MIX 6 */
+#define B2063_A_RX_MIX7 B43_LP_RADIO(0x0E6) /* A RX MIX 7 */
+#define B2063_A_RX_MIX8 B43_LP_RADIO(0x0E7) /* A RX MIX 8 */
+#define B2063_A_RX_PWRDET1 B43_LP_RADIO(0x0E8) /* A RX PWRDET 1 */
+#define B2063_A_RX_SPARE1 B43_LP_RADIO(0x0E9) /* A RX SPARE 1 */
+#define B2063_A_RX_SPARE2 B43_LP_RADIO(0x0EA) /* A RX SPARE 2 */
+#define B2063_A_RX_SPARE3 B43_LP_RADIO(0x0EB) /* A RX SPARE 3 */
+#define B2063_RX_TIA_CTL1 B43_LP_RADIO(0x0EC) /* RX TIA Control 1 */
+#define B2063_RX_TIA_CTL2 B43_LP_RADIO(0x0ED) /* RX TIA Control 2 */
+#define B2063_RX_TIA_CTL3 B43_LP_RADIO(0x0EE) /* RX TIA Control 3 */
+#define B2063_RX_TIA_CTL4 B43_LP_RADIO(0x0EF) /* RX TIA Control 4 */
+#define B2063_RX_TIA_CTL5 B43_LP_RADIO(0x0F0) /* RX TIA Control 5 */
+#define B2063_RX_TIA_CTL6 B43_LP_RADIO(0x0F1) /* RX TIA Control 6 */
+#define B2063_RX_BB_CTL1 B43_LP_RADIO(0x0F2) /* RX BB Control 1 */
+#define B2063_RX_BB_CTL2 B43_LP_RADIO(0x0F3) /* RX BB Control 2 */
+#define B2063_RX_BB_CTL3 B43_LP_RADIO(0x0F4) /* RX BB Control 3 */
+#define B2063_RX_BB_CTL4 B43_LP_RADIO(0x0F5) /* RX BB Control 4 */
+#define B2063_RX_BB_CTL5 B43_LP_RADIO(0x0F6) /* RX BB Control 5 */
+#define B2063_RX_BB_CTL6 B43_LP_RADIO(0x0F7) /* RX BB Control 6 */
+#define B2063_RX_BB_CTL7 B43_LP_RADIO(0x0F8) /* RX BB Control 7 */
+#define B2063_RX_BB_CTL8 B43_LP_RADIO(0x0F9) /* RX BB Control 8 */
+#define B2063_RX_BB_CTL9 B43_LP_RADIO(0x0FA) /* RX BB Control 9 */
+#define B2063_TX_RF_CTL1 B43_LP_RADIO(0x0FB) /* TX RF Control 1 */
+#define B2063_TX_RF_IDAC_LO_RF_I B43_LP_RADIO(0x0FC) /* TX RF IDAC LO RF I */
+#define B2063_TX_RF_IDAC_LO_RF_Q B43_LP_RADIO(0x0FD) /* TX RF IDAC LO RF Q */
+#define B2063_TX_RF_IDAC_LO_BB_I B43_LP_RADIO(0x0FE) /* TX RF IDAC LO BB I */
+#define B2063_TX_RF_IDAC_LO_BB_Q B43_LP_RADIO(0x0FF) /* TX RF IDAC LO BB Q */
+#define B2063_TX_RF_CTL2 B43_LP_RADIO(0x100) /* TX RF Control 2 */
+#define B2063_TX_RF_CTL3 B43_LP_RADIO(0x101) /* TX RF Control 3 */
+#define B2063_TX_RF_CTL4 B43_LP_RADIO(0x102) /* TX RF Control 4 */
+#define B2063_TX_RF_CTL5 B43_LP_RADIO(0x103) /* TX RF Control 5 */
+#define B2063_TX_RF_CTL6 B43_LP_RADIO(0x104) /* TX RF Control 6 */
+#define B2063_TX_RF_CTL7 B43_LP_RADIO(0x105) /* TX RF Control 7 */
+#define B2063_TX_RF_CTL8 B43_LP_RADIO(0x106) /* TX RF Control 8 */
+#define B2063_TX_RF_CTL9 B43_LP_RADIO(0x107) /* TX RF Control 9 */
+#define B2063_TX_RF_CTL10 B43_LP_RADIO(0x108) /* TX RF Control 10 */
+#define B2063_TX_RF_CTL14 B43_LP_RADIO(0x109) /* TX RF Control 14 */
+#define B2063_TX_RF_CTL15 B43_LP_RADIO(0x10A) /* TX RF Control 15 */
+#define B2063_PA_CTL1 B43_LP_RADIO(0x10B) /* PA Control 1 */
+#define B2063_PA_CTL2 B43_LP_RADIO(0x10C) /* PA Control 2 */
+#define B2063_PA_CTL3 B43_LP_RADIO(0x10D) /* PA Control 3 */
+#define B2063_PA_CTL4 B43_LP_RADIO(0x10E) /* PA Control 4 */
+#define B2063_PA_CTL5 B43_LP_RADIO(0x10F) /* PA Control 5 */
+#define B2063_PA_CTL6 B43_LP_RADIO(0x110) /* PA Control 6 */
+#define B2063_PA_CTL7 B43_LP_RADIO(0x111) /* PA Control 7 */
+#define B2063_PA_CTL8 B43_LP_RADIO(0x112) /* PA Control 8 */
+#define B2063_PA_CTL9 B43_LP_RADIO(0x113) /* PA Control 9 */
+#define B2063_PA_CTL10 B43_LP_RADIO(0x114) /* PA Control 10 */
+#define B2063_PA_CTL11 B43_LP_RADIO(0x115) /* PA Control 11 */
+#define B2063_PA_CTL12 B43_LP_RADIO(0x116) /* PA Control 12 */
+#define B2063_PA_CTL13 B43_LP_RADIO(0x117) /* PA Control 13 */
+#define B2063_TX_BB_CTL1 B43_LP_RADIO(0x118) /* TX BB Control 1 */
+#define B2063_TX_BB_CTL2 B43_LP_RADIO(0x119) /* TX BB Control 2 */
+#define B2063_TX_BB_CTL3 B43_LP_RADIO(0x11A) /* TX BB Control 3 */
+#define B2063_TX_BB_CTL4 B43_LP_RADIO(0x11B) /* TX BB Control 4 */
+#define B2063_GPIO_CTL1 B43_LP_RADIO(0x11C) /* GPIO Control 1 */
+#define B2063_VREG_CTL1 B43_LP_RADIO(0x11D) /* VREG Control 1 */
+#define B2063_AMUX_CTL1 B43_LP_RADIO(0x11E) /* AMUX Control 1 */
+#define B2063_IQ_CALIB_GVAR B43_LP_RADIO(0x11F) /* IQ Calibration GVAR */
+#define B2063_IQ_CALIB_CTL1 B43_LP_RADIO(0x120) /* IQ Calibration Control 1 */
+#define B2063_IQ_CALIB_CTL2 B43_LP_RADIO(0x121) /* IQ Calibration Control 2 */
+#define B2063_TEMPSENSE_CTL1 B43_LP_RADIO(0x122) /* TEMPSENSE Control 1 */
+#define B2063_TEMPSENSE_CTL2 B43_LP_RADIO(0x123) /* TEMPSENSE Control 2 */
+#define B2063_TX_RX_LOOPBACK1 B43_LP_RADIO(0x124) /* TX/RX LOOPBACK 1 */
+#define B2063_TX_RX_LOOPBACK2 B43_LP_RADIO(0x125) /* TX/RX LOOPBACK 2 */
+#define B2063_EXT_TSSI_CTL1 B43_LP_RADIO(0x126) /* EXT TSSI Control 1 */
+#define B2063_EXT_TSSI_CTL2 B43_LP_RADIO(0x127) /* EXT TSSI Control 2 */
+#define B2063_AFE_CTL B43_LP_RADIO(0x128) /* AFE Control */
+
+
+
+struct b43_phy_lp {
+ //TODO
+};
+
+
+struct b43_phy_operations;
+extern const struct b43_phy_operations b43_phyops_lp;
+
+#endif /* LINUX_B43_PHY_LP_H_ */
diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/phy_n.c
index 644eed993be..8bcfda5f3f0 100644
--- a/drivers/net/wireless/b43/nphy.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -26,7 +26,7 @@
#include <linux/types.h>
#include "b43.h"
-#include "nphy.h"
+#include "phy_n.h"
#include "tables_nphy.h"
@@ -34,10 +34,16 @@ void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
{//TODO
}
-void b43_nphy_xmitpower(struct b43_wldev *dev)
+static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev)
{//TODO
}
+static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
+ bool ignore_tssi)
+{//TODO
+ return B43_TXPWR_RES_DONE;
+}
+
static void b43_chantab_radio_upload(struct b43_wldev *dev,
const struct b43_nphy_channeltab_entry *e)
{
@@ -81,9 +87,8 @@ static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
//TODO
}
-/* Tune the hardware to a new channel. Don't call this directly.
- * Use b43_radio_selectchannel() */
-int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel)
+/* Tune the hardware to a new channel. */
+static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel)
{
const struct b43_nphy_channeltab_entry *tabent;
@@ -162,7 +167,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
msleep(1);
b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F);
msleep(1);
- b43_radio_selectchannel(dev, dev->phy.channel, 0);
+ nphy_channel_switch(dev, dev->phy.channel);
b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9);
b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9);
b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83);
@@ -484,3 +489,140 @@ int b43_phy_initn(struct b43_wldev *dev)
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
return 0;
}
+
+static int b43_nphy_op_allocate(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy;
+
+ nphy = kzalloc(sizeof(*nphy), GFP_KERNEL);
+ if (!nphy)
+ return -ENOMEM;
+ dev->phy.n = nphy;
+
+ return 0;
+}
+
+static void b43_nphy_op_prepare_structs(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_n *nphy = phy->n;
+
+ memset(nphy, 0, sizeof(*nphy));
+
+ //TODO init struct b43_phy_n
+}
+
+static void b43_nphy_op_free(struct b43_wldev *dev)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_n *nphy = phy->n;
+
+ kfree(nphy);
+ phy->n = NULL;
+}
+
+static int b43_nphy_op_init(struct b43_wldev *dev)
+{
+ return b43_phy_initn(dev);
+}
+
+static inline void check_phyreg(struct b43_wldev *dev, u16 offset)
+{
+#if B43_DEBUG
+ if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) {
+ /* OFDM registers are onnly available on A/G-PHYs */
+ b43err(dev->wl, "Invalid OFDM PHY access at "
+ "0x%04X on N-PHY\n", offset);
+ dump_stack();
+ }
+ if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) {
+ /* Ext-G registers are only available on G-PHYs */
+ b43err(dev->wl, "Invalid EXT-G PHY access at "
+ "0x%04X on N-PHY\n", offset);
+ dump_stack();
+ }
+#endif /* B43_DEBUG */
+}
+
+static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+ check_phyreg(dev, reg);
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ check_phyreg(dev, reg);
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+ /* N-PHY needs 0x100 for read access */
+ reg |= 0x100;
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+ /* Register 1 is a 32-bit register. */
+ B43_WARN_ON(reg == 1);
+
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
+ enum rfkill_state state)
+{//TODO
+}
+
+static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
+ on ? 0 : 0x7FFF);
+}
+
+static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel)
+{
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ if ((new_channel < 1) || (new_channel > 14))
+ return -EINVAL;
+ } else {
+ if (new_channel > 200)
+ return -EINVAL;
+ }
+
+ return nphy_channel_switch(dev, new_channel);
+}
+
+static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ return 1;
+ return 36;
+}
+
+const struct b43_phy_operations b43_phyops_n = {
+ .allocate = b43_nphy_op_allocate,
+ .free = b43_nphy_op_free,
+ .prepare_structs = b43_nphy_op_prepare_structs,
+ .init = b43_nphy_op_init,
+ .phy_read = b43_nphy_op_read,
+ .phy_write = b43_nphy_op_write,
+ .radio_read = b43_nphy_op_radio_read,
+ .radio_write = b43_nphy_op_radio_write,
+ .software_rfkill = b43_nphy_op_software_rfkill,
+ .switch_analog = b43_nphy_op_switch_analog,
+ .switch_channel = b43_nphy_op_switch_channel,
+ .get_default_chan = b43_nphy_op_get_default_chan,
+ .recalc_txpower = b43_nphy_op_recalc_txpower,
+ .adjust_txpower = b43_nphy_op_adjust_txpower,
+};
diff --git a/drivers/net/wireless/b43/nphy.h b/drivers/net/wireless/b43/phy_n.h
index faf46b9cbf1..1749aef4147 100644
--- a/drivers/net/wireless/b43/nphy.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -1,7 +1,7 @@
#ifndef B43_NPHY_H_
#define B43_NPHY_H_
-#include "phy.h"
+#include "phy_common.h"
/* N-PHY registers. */
@@ -919,54 +919,12 @@
struct b43_wldev;
+struct b43_phy_n {
+ //TODO lots of missing stuff
+};
-#ifdef CONFIG_B43_NPHY
-/* N-PHY support enabled */
-int b43_phy_initn(struct b43_wldev *dev);
+struct b43_phy_operations;
+extern const struct b43_phy_operations b43_phyops_n;
-void b43_nphy_radio_turn_on(struct b43_wldev *dev);
-void b43_nphy_radio_turn_off(struct b43_wldev *dev);
-
-int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel);
-
-void b43_nphy_xmitpower(struct b43_wldev *dev);
-void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna);
-
-
-#else /* CONFIG_B43_NPHY */
-/* N-PHY support disabled */
-
-
-static inline
-int b43_phy_initn(struct b43_wldev *dev)
-{
- return -EOPNOTSUPP;
-}
-
-static inline
-void b43_nphy_radio_turn_on(struct b43_wldev *dev)
-{
-}
-static inline
-void b43_nphy_radio_turn_off(struct b43_wldev *dev)
-{
-}
-
-static inline
-int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel)
-{
- return -ENOSYS;
-}
-
-static inline
-void b43_nphy_xmitpower(struct b43_wldev *dev)
-{
-}
-static inline
-void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
-{
-}
-
-#endif /* CONFIG_B43_NPHY */
#endif /* B43_NPHY_H_ */
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index fec5645944a..713753781f4 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -24,6 +24,7 @@
#include "rfkill.h"
#include "b43.h"
+#include "phy_common.h"
#include <linux/kmod.h>
@@ -43,23 +44,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
return 0;
}
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
@@ -77,7 +61,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43_rfkill_update_state(dev);
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
@@ -114,11 +97,11 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
goto out_unlock;
}
if (!dev->phy.radio_on)
- b43_radio_turn_on(dev);
+ b43_software_rfkill(dev, state);
break;
case RFKILL_STATE_SOFT_BLOCKED:
if (dev->phy.radio_on)
- b43_radio_turn_off(dev, 0);
+ b43_software_rfkill(dev, state);
break;
default:
b43warn(wl, "Received unexpected rfkill state %d.\n", state);
@@ -187,6 +170,11 @@ void b43_rfkill_init(struct b43_wldev *dev)
"The built-in radio LED will not work.\n");
#endif /* CONFIG_RFKILL_INPUT */
+#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE)
+ b43warn(wl, "The rfkill-input subsystem is not available. "
+ "The built-in radio LED will not work.\n");
+#endif
+
err = input_register_polled_device(rfk->poll_dev);
if (err)
goto err_unreg_rfk;
diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c
index 275095b8cbe..5adaa3692d7 100644
--- a/drivers/net/wireless/b43/sysfs.c
+++ b/drivers/net/wireless/b43/sysfs.c
@@ -29,7 +29,7 @@
#include "b43.h"
#include "sysfs.h"
#include "main.h"
-#include "phy.h"
+#include "phy_common.h"
#define GENERIC_FILESIZE 64
@@ -59,7 +59,12 @@ static ssize_t b43_attr_interfmode_show(struct device *dev,
mutex_lock(&wldev->wl->mutex);
- switch (wldev->phy.interfmode) {
+ if (wldev->phy.type != B43_PHYTYPE_G) {
+ mutex_unlock(&wldev->wl->mutex);
+ return -ENOSYS;
+ }
+
+ switch (wldev->phy.g->interfmode) {
case B43_INTERFMODE_NONE:
count =
snprintf(buf, PAGE_SIZE,
@@ -117,11 +122,15 @@ static ssize_t b43_attr_interfmode_store(struct device *dev,
mutex_lock(&wldev->wl->mutex);
spin_lock_irqsave(&wldev->wl->irq_lock, flags);
- err = b43_radio_set_interference_mitigation(wldev, mode);
- if (err) {
- b43err(wldev->wl, "Interference Mitigation not "
- "supported by device\n");
- }
+ if (wldev->phy.ops->interf_mitigation) {
+ err = wldev->phy.ops->interf_mitigation(wldev, mode);
+ if (err) {
+ b43err(wldev->wl, "Interference Mitigation not "
+ "supported by device\n");
+ }
+ } else
+ err = -ENOSYS;
+
mmiowb();
spin_unlock_irqrestore(&wldev->wl->irq_lock, flags);
mutex_unlock(&wldev->wl->mutex);
diff --git a/drivers/net/wireless/b43/tables.c b/drivers/net/wireless/b43/tables.c
index 3f5ea06bf13..1ef9a6463ec 100644
--- a/drivers/net/wireless/b43/tables.c
+++ b/drivers/net/wireless/b43/tables.c
@@ -27,7 +27,8 @@
#include "b43.h"
#include "tables.h"
-#include "phy.h"
+#include "phy_g.h"
+
const u32 b43_tab_rotor[] = {
0xFEB93FFD, 0xFEC63FFD, /* 0 */
@@ -377,17 +378,17 @@ static inline void assert_sizes(void)
u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
u16 addr;
addr = table + offset;
- if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) ||
- (addr - 1 != phy->ofdmtab_addr)) {
+ if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) ||
+ (addr - 1 != gphy->ofdmtab_addr)) {
/* The hardware has a different address in memory. Update it. */
b43_phy_write(dev, B43_PHY_OTABLECTL, addr);
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ;
+ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ;
}
- phy->ofdmtab_addr = addr;
+ gphy->ofdmtab_addr = addr;
return b43_phy_read(dev, B43_PHY_OTABLEI);
@@ -398,34 +399,34 @@ u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset)
void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
u16 offset, u16 value)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
u16 addr;
addr = table + offset;
- if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) ||
- (addr - 1 != phy->ofdmtab_addr)) {
+ if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) ||
+ (addr - 1 != gphy->ofdmtab_addr)) {
/* The hardware has a different address in memory. Update it. */
b43_phy_write(dev, B43_PHY_OTABLECTL, addr);
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE;
+ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE;
}
- phy->ofdmtab_addr = addr;
+ gphy->ofdmtab_addr = addr;
b43_phy_write(dev, B43_PHY_OTABLEI, value);
}
u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
u32 ret;
u16 addr;
addr = table + offset;
- if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) ||
- (addr - 1 != phy->ofdmtab_addr)) {
+ if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) ||
+ (addr - 1 != gphy->ofdmtab_addr)) {
/* The hardware has a different address in memory. Update it. */
b43_phy_write(dev, B43_PHY_OTABLECTL, addr);
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ;
+ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ;
}
- phy->ofdmtab_addr = addr;
+ gphy->ofdmtab_addr = addr;
ret = b43_phy_read(dev, B43_PHY_OTABLEQ);
ret <<= 16;
ret |= b43_phy_read(dev, B43_PHY_OTABLEI);
@@ -436,17 +437,17 @@ u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset)
void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
u16 offset, u32 value)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = dev->phy.g;
u16 addr;
addr = table + offset;
- if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) ||
- (addr - 1 != phy->ofdmtab_addr)) {
+ if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) ||
+ (addr - 1 != gphy->ofdmtab_addr)) {
/* The hardware has a different address in memory. Update it. */
b43_phy_write(dev, B43_PHY_OTABLECTL, addr);
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE;
+ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE;
}
- phy->ofdmtab_addr = addr;
+ gphy->ofdmtab_addr = addr;
b43_phy_write(dev, B43_PHY_OTABLEI, value);
b43_phy_write(dev, B43_PHY_OTABLEQ, (value >> 16));
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 2aa57551786..4e233631554 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -24,8 +24,8 @@
#include "b43.h"
#include "tables_nphy.h"
-#include "phy.h"
-#include "nphy.h"
+#include "phy_common.h"
+#include "phy_n.h"
struct b2055_inittab_entry {
diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index daa94211f83..0c0fb15abb9 100644
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -27,7 +27,7 @@
#include "b43.h"
#include "main.h"
#include "tables.h"
-#include "phy.h"
+#include "phy_common.h"
#include "wa.h"
static void b43_wa_papd(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 9dda8169f7c..2fabcf8f047 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -28,7 +28,7 @@
*/
#include "xmit.h"
-#include "phy.h"
+#include "phy_common.h"
#include "dma.h"
#include "pio.h"
@@ -208,7 +208,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
txrate = ieee80211_get_tx_rate(dev->wl->hw, info);
rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB;
rate_ofdm = b43_is_ofdm_rate(rate);
- fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : txrate;
+ fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate;
rate_fb = fbrate->hw_value;
rate_fb_ofdm = b43_is_ofdm_rate(rate_fb);
@@ -252,7 +252,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
}
/* Hardware appends ICV. */
- plcp_fragment_len += info->control.icv_len;
+ plcp_fragment_len += info->control.hw_key->icv_len;
key_idx = b43_kidx_to_fw(dev, key_idx);
mac_ctl |= (key_idx << B43_TXH_MAC_KEYIDX_SHIFT) &
@@ -260,7 +260,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) &
B43_TXH_MAC_KEYALG;
wlhdr_len = ieee80211_hdrlen(fctl);
- iv_len = min((size_t) info->control.iv_len,
+ iv_len = min((size_t) info->control.hw_key->iv_len,
ARRAY_SIZE(txhdr->iv));
memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
}
@@ -431,6 +431,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
int adjust_2053, int adjust_2050)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *gphy = phy->g;
s32 tmp;
switch (phy->radio_ver) {
@@ -450,7 +451,8 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
boardflags_lo & B43_BFL_RSSI) {
if (in_rssi > 63)
in_rssi = 63;
- tmp = phy->nrssi_lt[in_rssi];
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
+ tmp = gphy->nrssi_lt[in_rssi];
tmp = 31 - tmp;
tmp *= -131;
tmp /= 128;
@@ -678,6 +680,8 @@ void b43_handle_txstatus(struct b43_wldev *dev,
b43_pio_handle_txstatus(dev, status);
else
b43_dma_handle_txstatus(dev, status);
+
+ b43_phy_txpower_check(dev, 0);
}
/* Fill out the mac80211 TXstatus report based on the b43-specific