diff options
Diffstat (limited to 'drivers/net/wireless/ipw2x00/libipw_wx.c')
| -rw-r--r-- | drivers/net/wireless/ipw2x00/libipw_wx.c | 760 |
1 files changed, 760 insertions, 0 deletions
diff --git a/drivers/net/wireless/ipw2x00/libipw_wx.c b/drivers/net/wireless/ipw2x00/libipw_wx.c new file mode 100644 index 00000000000..31ea3abfc32 --- /dev/null +++ b/drivers/net/wireless/ipw2x00/libipw_wx.c @@ -0,0 +1,760 @@ +/****************************************************************************** + + Copyright(c) 2004-2005 Intel Corporation. All rights reserved. + + Portions of this file are based on the WEP enablement code provided by the + Host AP project hostap-drivers v0.1.3 + Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + <j@w1.fi> + Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi> + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ + +#include <linux/kmod.h> +#include <linux/module.h> +#include <linux/jiffies.h> + +#include <net/lib80211.h> +#include <net/ieee80211.h> +#include <linux/wireless.h> + +static const char *ieee80211_modes[] = { + "?", "a", "b", "ab", "g", "ag", "bg", "abg" +}; + +#define MAX_CUSTOM_LEN 64 +static char *ieee80211_translate_scan(struct ieee80211_device *ieee, + char *start, char *stop, + struct ieee80211_network *network, + struct iw_request_info *info) +{ + char custom[MAX_CUSTOM_LEN]; + char *p; + struct iw_event iwe; + int i, j; + char *current_val; /* For rates */ + u8 rate; + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN); + + /* Remaining entries will be displayed in the order we provide them */ + + /* Add the ESSID */ + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + iwe.u.data.length = min(network->ssid_len, (u8) 32); + start = iwe_stream_add_point(info, start, stop, + &iwe, network->ssid); + + /* Add the protocol name */ + iwe.cmd = SIOCGIWNAME; + snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", + ieee80211_modes[network->mode]); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN); + + /* Add mode */ + iwe.cmd = SIOCGIWMODE; + if (network->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + if (network->capability & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + + start = iwe_stream_add_event(info, start, stop, + &iwe, IW_EV_UINT_LEN); + } + + /* Add channel and frequency */ + /* Note : userspace automatically computes channel using iwrange */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel); + iwe.u.freq.e = 6; + iwe.u.freq.i = 0; + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (network->capability & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + start = iwe_stream_add_point(info, start, stop, + &iwe, network->ssid); + + /* Add basic and extended rates */ + /* Rate : stuffing multiple values in a single event require a bit + * more of magic - Jean II */ + current_val = start + iwe_stream_lcp_len(info); + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + + for (i = 0, j = 0; i < network->rates_len;) { + if (j < network->rates_ex_len && + ((network->rates_ex[j] & 0x7F) < + (network->rates[i] & 0x7F))) + rate = network->rates_ex[j++] & 0x7F; + else + rate = network->rates[i++] & 0x7F; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((rate & 0x7f) * 500000); + /* Add new value to event */ + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); + } + for (; j < network->rates_ex_len; j++) { + rate = network->rates_ex[j] & 0x7F; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((rate & 0x7f) * 500000); + /* Add new value to event */ + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); + } + /* Check if we added any rate */ + if ((current_val - start) > iwe_stream_lcp_len(info)) + start = current_val; + + /* Add quality statistics */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | + IW_QUAL_NOISE_UPDATED; + + if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) { + iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID | + IW_QUAL_LEVEL_INVALID; + iwe.u.qual.qual = 0; + } else { + if (ieee->perfect_rssi == ieee->worst_rssi) + iwe.u.qual.qual = 100; + else + iwe.u.qual.qual = + (100 * + (ieee->perfect_rssi - ieee->worst_rssi) * + (ieee->perfect_rssi - ieee->worst_rssi) - + (ieee->perfect_rssi - network->stats.rssi) * + (15 * (ieee->perfect_rssi - ieee->worst_rssi) + + 62 * (ieee->perfect_rssi - + network->stats.rssi))) / + ((ieee->perfect_rssi - + ieee->worst_rssi) * (ieee->perfect_rssi - + ieee->worst_rssi)); + if (iwe.u.qual.qual > 100) + iwe.u.qual.qual = 100; + else if (iwe.u.qual.qual < 1) + iwe.u.qual.qual = 0; + } + + if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) { + iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID; + iwe.u.qual.noise = 0; + } else { + iwe.u.qual.noise = network->stats.noise; + } + + if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) { + iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID; + iwe.u.qual.level = 0; + } else { + iwe.u.qual.level = network->stats.signal; + } + + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN); + + iwe.cmd = IWEVCUSTOM; + p = custom; + + iwe.u.data.length = p - custom; + if (iwe.u.data.length) + start = iwe_stream_add_point(info, start, stop, &iwe, custom); + + memset(&iwe, 0, sizeof(iwe)); + if (network->wpa_ie_len) { + char buf[MAX_WPA_IE_LEN]; + memcpy(buf, network->wpa_ie, network->wpa_ie_len); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = network->wpa_ie_len; + start = iwe_stream_add_point(info, start, stop, &iwe, buf); + } + + memset(&iwe, 0, sizeof(iwe)); + if (network->rsn_ie_len) { + char buf[MAX_WPA_IE_LEN]; + memcpy(buf, network->rsn_ie, network->rsn_ie_len); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = network->rsn_ie_len; + start = iwe_stream_add_point(info, start, stop, &iwe, buf); + } + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + p = custom; + p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - network->last_scanned)); + iwe.u.data.length = p - custom; + if (iwe.u.data.length) + start = iwe_stream_add_point(info, start, stop, &iwe, custom); + + /* Add spectrum management information */ + iwe.cmd = -1; + p = custom; + p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Channel flags: "); + + if (ieee80211_get_channel_flags(ieee, network->channel) & + IEEE80211_CH_INVALID) { + iwe.cmd = IWEVCUSTOM; + p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "INVALID "); + } + + if (ieee80211_get_channel_flags(ieee, network->channel) & + IEEE80211_CH_RADAR_DETECT) { + iwe.cmd = IWEVCUSTOM; + p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "DFS "); + } + + if (iwe.cmd == IWEVCUSTOM) { + iwe.u.data.length = p - custom; + start = iwe_stream_add_point(info, start, stop, &iwe, custom); + } + + return start; +} + +#define SCAN_ITEM_SIZE 128 + +int ieee80211_wx_get_scan(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ieee80211_network *network; + unsigned long flags; + int err = 0; + + char *ev = extra; + char *stop = ev + wrqu->data.length; + int i = 0; + DECLARE_SSID_BUF(ssid); + + IEEE80211_DEBUG_WX("Getting scan\n"); + + spin_lock_irqsave(&ieee->lock, flags); + + list_for_each_entry(network, &ieee->network_list, list) { + i++; + if (stop - ev < SCAN_ITEM_SIZE) { + err = -E2BIG; + break; + } + + if (ieee->scan_age == 0 || + time_after(network->last_scanned + ieee->scan_age, jiffies)) + ev = ieee80211_translate_scan(ieee, ev, stop, network, + info); + else + IEEE80211_DEBUG_SCAN("Not showing network '%s (" + "%pM)' due to age (%dms).\n", + print_ssid(ssid, network->ssid, + network->ssid_len), + network->bssid, + jiffies_to_msecs(jiffies - + network-> + last_scanned)); + } + + spin_unlock_irqrestore(&ieee->lock, flags); + + wrqu->data.length = ev - extra; + wrqu->data.flags = 0; + + IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i); + + return err; +} + +int ieee80211_wx_set_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *keybuf) +{ + struct iw_point *erq = &(wrqu->encoding); + struct net_device *dev = ieee->dev; + struct ieee80211_security sec = { + .flags = 0 + }; + int i, key, key_provided, len; + struct lib80211_crypt_data **crypt; + int host_crypto = ieee->host_encrypt || ieee->host_decrypt || ieee->host_build_iv; + DECLARE_SSID_BUF(ssid); + + IEEE80211_DEBUG_WX("SET_ENCODE\n"); + + key = erq->flags & IW_ENCODE_INDEX; + if (key) { + if (key > WEP_KEYS) + return -EINVAL; + key--; + key_provided = 1; + } else { + key_provided = 0; + key = ieee->crypt_info.tx_keyidx; + } + + IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ? + "provided" : "default"); + + crypt = &ieee->crypt_info.crypt[key]; + + if (erq->flags & IW_ENCODE_DISABLED) { + if (key_provided && *crypt) { + IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n", + key); + lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt); + } else + IEEE80211_DEBUG_WX("Disabling encryption.\n"); + + /* Check all the keys to see if any are still configured, + * and if no key index was provided, de-init them all */ + for (i = 0; i < WEP_KEYS; i++) { + if (ieee->crypt_info.crypt[i] != NULL) { + if (key_provided) + break; + lib80211_crypt_delayed_deinit(&ieee->crypt_info, + &ieee->crypt_info.crypt[i]); + } + } + + if (i == WEP_KEYS) { + sec.enabled = 0; + sec.encrypt = 0; + sec.level = SEC_LEVEL_0; + sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT; + } + + goto done; + } + + sec.enabled = 1; + sec.encrypt = 1; + sec.flags |= SEC_ENABLED | SEC_ENCRYPT; + + if (*crypt != NULL && (*crypt)->ops != NULL && + strcmp((*crypt)->ops->name, "WEP") != 0) { + /* changing to use WEP; deinit previously used algorithm + * on this key */ + lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt); + } + + if (*crypt == NULL && host_crypto) { + struct lib80211_crypt_data *new_crypt; + + /* take WEP into use */ + new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) + return -ENOMEM; + new_crypt->ops = lib80211_get_crypto_ops("WEP"); + if (!new_crypt->ops) { + request_module("lib80211_crypt_wep"); + new_crypt->ops = lib80211_get_crypto_ops("WEP"); + } + + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(key); + + if (!new_crypt->ops || !new_crypt->priv) { + kfree(new_crypt); + new_crypt = NULL; + + printk(KERN_WARNING "%s: could not initialize WEP: " + "load module lib80211_crypt_wep\n", dev->name); + return -EOPNOTSUPP; + } + *crypt = new_crypt; + } + + /* If a new key was provided, set it up */ + if (erq->length > 0) { +#ifdef CONFIG_IEEE80211_DEBUG + DECLARE_SSID_BUF(ssid); +#endif + + len = erq->length <= 5 ? 5 : 13; + memcpy(sec.keys[key], keybuf, erq->length); + if (len > erq->length) + memset(sec.keys[key] + erq->length, 0, + len - erq->length); + IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n", + key, print_ssid(ssid, sec.keys[key], len), + erq->length, len); + sec.key_sizes[key] = len; + if (*crypt) + (*crypt)->ops->set_key(sec.keys[key], len, NULL, + (*crypt)->priv); + sec.flags |= (1 << key); + /* This ensures a key will be activated if no key is + * explicitly set */ + if (key == sec.active_key) + sec.flags |= SEC_ACTIVE_KEY; + + } else { + if (host_crypto) { + len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN, + NULL, (*crypt)->priv); + if (len == 0) { + /* Set a default key of all 0 */ + IEEE80211_DEBUG_WX("Setting key %d to all " + "zero.\n", key); + memset(sec.keys[key], 0, 13); + (*crypt)->ops->set_key(sec.keys[key], 13, NULL, + (*crypt)->priv); + sec.key_sizes[key] = 13; + sec.flags |= (1 << key); + } + } + /* No key data - just set the default TX key index */ + if (key_provided) { + IEEE80211_DEBUG_WX("Setting key %d to default Tx " + "key.\n", key); + ieee->crypt_info.tx_keyidx = key; + sec.active_key = key; + sec.flags |= SEC_ACTIVE_KEY; + } + } + if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) { + ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); + sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : + WLAN_AUTH_SHARED_KEY; + sec.flags |= SEC_AUTH_MODE; + IEEE80211_DEBUG_WX("Auth: %s\n", + sec.auth_mode == WLAN_AUTH_OPEN ? + "OPEN" : "SHARED KEY"); + } + + /* For now we just support WEP, so only set that security level... + * TODO: When WPA is added this is one place that needs to change */ + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */ + sec.encode_alg[key] = SEC_ALG_WEP; + + done: + if (ieee->set_security) + ieee->set_security(dev, &sec); + + /* Do not reset port if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. If your hardware requires a reset after WEP + * configuration (for example... Prism2), implement the reset_port in + * the callbacks structures used to initialize the 802.11 stack. */ + if (ieee->reset_on_keychange && + ieee->iw_mode != IW_MODE_INFRA && + ieee->reset_port && ieee->reset_port(dev)) { + printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); + return -EINVAL; + } + return 0; +} + +int ieee80211_wx_get_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *keybuf) +{ + struct iw_point *erq = &(wrqu->encoding); + int len, key; + struct lib80211_crypt_data *crypt; + struct ieee80211_security *sec = &ieee->sec; + + IEEE80211_DEBUG_WX("GET_ENCODE\n"); + + key = erq->flags & IW_ENCODE_INDEX; + if (key) { + if (key > WEP_KEYS) + return -EINVAL; + key--; + } else + key = ieee->crypt_info.tx_keyidx; + + crypt = ieee->crypt_info.crypt[key]; + erq->flags = key + 1; + + if (!sec->enabled) { + erq->length = 0; + erq->flags |= IW_ENCODE_DISABLED; + return 0; + } + + len = sec->key_sizes[key]; + memcpy(keybuf, sec->keys[key], len); + + erq->length = len; + erq->flags |= IW_ENCODE_ENABLED; + + if (ieee->open_wep) + erq->flags |= IW_ENCODE_OPEN; + else + erq->flags |= IW_ENCODE_RESTRICTED; + + return 0; +} + +int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct net_device *dev = ieee->dev; + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int i, idx, ret = 0; + int group_key = 0; + const char *alg, *module; + struct lib80211_crypto_ops *ops; + struct lib80211_crypt_data **crypt; + + struct ieee80211_security sec = { + .flags = 0, + }; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if (idx < 1 || idx > WEP_KEYS) + return -EINVAL; + idx--; + } else + idx = ieee->crypt_info.tx_keyidx; + + if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { + crypt = &ieee->crypt_info.crypt[idx]; + group_key = 1; + } else { + /* some Cisco APs use idx>0 for unicast in dynamic WEP */ + if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP) + return -EINVAL; + if (ieee->iw_mode == IW_MODE_INFRA) + crypt = &ieee->crypt_info.crypt[idx]; + else + return -EINVAL; + } + + sec.flags |= SEC_ENABLED | SEC_ENCRYPT; + if ((encoding->flags & IW_ENCODE_DISABLED) || + ext->alg == IW_ENCODE_ALG_NONE) { + if (*crypt) + lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt); + + for (i = 0; i < WEP_KEYS; i++) + if (ieee->crypt_info.crypt[i] != NULL) + break; + + if (i == WEP_KEYS) { + sec.enabled = 0; + sec.encrypt = 0; + sec.level = SEC_LEVEL_0; + sec.flags |= SEC_LEVEL; + } + goto done; + } + + sec.enabled = 1; + sec.encrypt = 1; + + if (group_key ? !ieee->host_mc_decrypt : + !(ieee->host_encrypt || ieee->host_decrypt || + ieee->host_encrypt_msdu)) + goto skip_host_crypt; + + switch (ext->alg) { + case IW_ENCODE_ALG_WEP: + alg = "WEP"; + module = "lib80211_crypt_wep"; + break; + case IW_ENCODE_ALG_TKIP: + alg = "TKIP"; + module = "lib80211_crypt_tkip"; + break; + case IW_ENCODE_ALG_CCMP: + alg = "CCMP"; + module = "lib80211_crypt_ccmp"; + break; + default: + IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", + dev->name, ext->alg); + ret = -EINVAL; + goto done; + } + + ops = lib80211_get_crypto_ops(alg); + if (ops == NULL) { + request_module(module); + ops = lib80211_get_crypto_ops(alg); + } + if (ops == NULL) { + IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", + dev->name, ext->alg); + ret = -EINVAL; + goto done; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct lib80211_crypt_data *new_crypt; + + lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt); + + new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + new_crypt->ops = ops; + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(idx); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + ret = -EINVAL; + goto done; + } + *crypt = new_crypt; + } + + if (ext->key_len > 0 && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, + (*crypt)->priv) < 0) { + IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name); + ret = -EINVAL; + goto done; + } + + skip_host_crypt: + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + ieee->crypt_info.tx_keyidx = idx; + sec.active_key = idx; + sec.flags |= SEC_ACTIVE_KEY; + } + + if (ext->alg != IW_ENCODE_ALG_NONE) { + memcpy(sec.keys[idx], ext->key, ext->key_len); + sec.key_sizes[idx] = ext->key_len; + sec.flags |= (1 << idx); + if (ext->alg == IW_ENCODE_ALG_WEP) { + sec.encode_alg[idx] = SEC_ALG_WEP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_1; + } else if (ext->alg == IW_ENCODE_ALG_TKIP) { + sec.encode_alg[idx] = SEC_ALG_TKIP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_2; + } else if (ext->alg == IW_ENCODE_ALG_CCMP) { + sec.encode_alg[idx] = SEC_ALG_CCMP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_3; + } + /* Don't set sec level for group keys. */ + if (group_key) + sec.flags &= ~SEC_LEVEL; + } + done: + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + + /* + * Do not reset port if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. If your hardware requires a reset after WEP + * configuration (for example... Prism2), implement the reset_port in + * the callbacks structures used to initialize the 802.11 stack. + */ + if (ieee->reset_on_keychange && + ieee->iw_mode != IW_MODE_INFRA && + ieee->reset_port && ieee->reset_port(dev)) { + IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name); + return -EINVAL; + } + + return ret; +} + +int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + struct ieee80211_security *sec = &ieee->sec; + int idx, max_key_len; + + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + return -EINVAL; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if (idx < 1 || idx > WEP_KEYS) + return -EINVAL; + idx--; + } else + idx = ieee->crypt_info.tx_keyidx; + + if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) && + ext->alg != IW_ENCODE_ALG_WEP) + if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA) + return -EINVAL; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + if (!sec->enabled) { + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + } else { + if (sec->encode_alg[idx] == SEC_ALG_WEP) + ext->alg = IW_ENCODE_ALG_WEP; + else if (sec->encode_alg[idx] == SEC_ALG_TKIP) + ext->alg = IW_ENCODE_ALG_TKIP; + else if (sec->encode_alg[idx] == SEC_ALG_CCMP) + ext->alg = IW_ENCODE_ALG_CCMP; + else + return -EINVAL; + + ext->key_len = sec->key_sizes[idx]; + memcpy(ext->key, sec->keys[idx], ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + if (ext->key_len && + (ext->alg == IW_ENCODE_ALG_TKIP || + ext->alg == IW_ENCODE_ALG_CCMP)) + ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; + + } + + return 0; +} + +EXPORT_SYMBOL(ieee80211_wx_set_encodeext); +EXPORT_SYMBOL(ieee80211_wx_get_encodeext); + +EXPORT_SYMBOL(ieee80211_wx_get_scan); +EXPORT_SYMBOL(ieee80211_wx_set_encode); +EXPORT_SYMBOL(ieee80211_wx_get_encode); |