aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/sky2.c52
1 files changed, 30 insertions, 22 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f68ccfbffff..178249a96e1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -625,13 +625,16 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
}
-static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len)
+/* Assign Ram Buffer allocation.
+ * start and end are in units of 4k bytes
+ * ram registers are in units of 64bit words
+ */
+static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk)
{
- u32 end;
+ u32 start, end;
- start /= 8;
- len /= 8;
- end = start + len - 1;
+ start = startk * 4096/8;
+ end = (endk * 4096/8) - 1;
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
sky2_write32(hw, RB_ADDR(q, RB_START), start);
@@ -640,14 +643,19 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len)
sky2_write32(hw, RB_ADDR(q, RB_RP), start);
if (q == Q_R1 || q == Q_R2) {
- u32 rxup, rxlo;
+ u32 space = (endk - startk) * 4096/8;
+ u32 tp = space - space/4;
- rxlo = len/2;
- rxup = rxlo + len/4;
+ /* On receive queue's set the thresholds
+ * give receiver priority when > 3/4 full
+ * send pause when down to 2K
+ */
+ sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
+ sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
- /* Set thresholds on receive queue's */
- sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), rxup);
- sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), rxlo);
+ tp = space - 2048/8;
+ sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
+ sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
} else {
/* Enable store & forward on Tx queue's because
* Tx FIFO is only 1K on Yukon
@@ -1002,19 +1010,19 @@ static int sky2_up(struct net_device *dev)
sky2_mac_init(hw, port);
- /* Configure RAM buffers */
- if (hw->chip_id == CHIP_ID_YUKON_FE ||
- (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == 2))
- ramsize = 4096;
- else {
- u8 e0 = sky2_read8(hw, B2_E_0);
- ramsize = (e0 == 0) ? (128 * 1024) : (e0 * 4096);
- }
+ /* Determine available ram buffer space (in 4K blocks).
+ * Note: not sure about the FE setting below yet
+ */
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ ramsize = 4;
+ else
+ ramsize = sky2_read8(hw, B2_E_0);
+
+ /* Give transmitter one third (rounded up) */
+ rxspace = ramsize - (ramsize + 2) / 3;
- /* 2/3 for Rx */
- rxspace = (2 * ramsize) / 3;
sky2_ramset(hw, rxqaddr[port], 0, rxspace);
- sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
+ sky2_ramset(hw, txqaddr[port], rxspace, ramsize);
/* Make sure SyncQ is disabled */
sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),